RE: [ECOS] Help! on building ecosconfigure

[Gary Thomas <gthomas@cambridge.redhat.com>]

On 19-Apr-2001 Narayana, Venkat A. wrote:
> Hi,
> Thanks for the reply.After you have pointed out, that my 'ld' is from
> arm-linux, instead of arm-elf/xscale-elf,i looked at my tools/biin and
> realised
> that xscale-elf-gcc => arm-linux-gcc. So, i changed xscale-elf-gcc =>
> arm-elf-gcc

Note: arm-elf-XXX is not xscale-elf-XXX.  There are differences in the toolchains,
certainly those required to support the Xscale (aka StrongARM-2) architecture.

> and did a 'make' in my redboot.ROM directory, to build ROM startup files.
> Guess what!!! It built the binaries!. BUT, after i did 'make clean' and then
> did
> 'make'( i want ot build ROM Startup bin files),now, i got a whole bunch of
> new 
> errors like below.
> 
> To answer your query on what i used to configure:
>    host=i686-pc-linux
>    target=arm-elf
>    prefix = /home/users/ecoscvs/tools
> 
> The following info may be usefule for you;
> xscale-elf-gcc --version = 3.0
> xscale-elf-gcc -dumpmachine = arm-elf
> gcc --version = 3.0
> gcc -dumpmachine = i686-pc-linux-gnu
> 
> Why am i getting these new errors/ does my path is bad? 
> And why did in the mixed up case of gcc and ld, binaries got built.
> 
> ___Start____
> redboot_net_io.o(.text+0xa00): undefined reference to `puts'
> redboot_net_io.o(.text+0xa4c): undefined reference to `puts'
> /home/users/redboot.ROM/install/lib/libtarget.a(io_flash_flash.o): In
> function `flash_erase':
> io_flash_flash.o(.text+0x2c8): undefined reference to `putchar'
> io_flash_flash.o(.text+0x2e0): undefined reference to `putchar'
> /home/users/redboot.ROM/install/lib/libtarget.a(io_flash_flash.o): In
> function `flash_program'
> ___End___
> 

I've no clue about these - those functions are not used in normal eCos programs
at all.

Maybe you could send me one of these files (reboot_net_io.o - *NOT* to the list)
I'll give it a glance.

> 
> 
> 
> On 19-Apr-2001 Narayana, Venkat A. wrote:
>> Hi,
>> I have cross-compiled gcc/ld/nm/objcopy/ar/as for 'arm-elf'( i already
> have
>> these for 'arm-linux'). And, after that, when i tried to compile redboot
> for
>> ROM startup( in accordance with page23 of Redboot User's guide), i am
> still
>> getting this error.
>> Is 'xscale-elf' a different format? Can't i use 'arm-elf' or 'arm-linux'
> in
>> lieu
>> of 'xscale-elf'?
>> 
> 
> They are basically the same, but slightly different configurations.
> 
>From the messages below, it does not look like 'xscale-elf-gcc' is calling
> the appropriate 'xscale-elf-ld' file.  When you built these, what
> "configure"
> line did you use?  In particular, what were the values for --prefix and
> --host-prefix?
> 
>> Your help is greatly appreciated.
>> 
>> Venkat N
>> 
>> -----Original Message-----
>> From: Narayana, Venkat A. [ mailto:NarayVA@nsc-msg01.network.com ]
>> Sent: Wednesday, April 18, 2001 1:20 PM
>> To: 'Jonathan Larmour'
>> Cc: 'ecos-discuss@sourceware.cygnus.com'
>> Subject: RE: [ECOS] Help! on building ecosconfigure
>> 
>> 
>> Hi,
>> I compiled ecosconfig, and tried to build redboot for ROM startup,
>> whence i got these errors:
>> What is that i am doing wrong? 
>> 
>> _START_LOG__
>> xscale-elf-gcc -Wall -Wpointer-arith -Wstrict-prototypes -Winline -Wundef
>> -Woverloaded-virtual -g -O2 -fno-rtti -fno-exceptions -fvtable-gc
>> -finit-priority -mapcs-frame -nostdlib -Wl,-r,--whole-archive -o
>> /home/users/redboot.ROM/install/lib/extras.o
>> /home/users/redboot.ROM/install/lib/libextras.a
>> /usr/arm/tools/arm-linux/bin/ld: unrecognised emulation mode: elf32arm
>   ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
> 
> This should be the xscale-elf version, not any arm-linux one.
> 
>> Supported emulations: armelf_linux armelf_linux26 armelf
>> collect2: ld returned 1 exit status
>> make[1]: *** [/home/users/redboot.ROM/install/lib/extras.o] Error 1
>> make[1]: Leaving directory `/home/users/redboot.ROM/hal/common/current'
>> make: *** [build] Error 2
>> [root@narayva-nt redboot.ROM]# uname -a
>> Linux narayva-nt.network.com 2.2.5-15 #14 Wed Mar 28 10:02:40 CST 2001
> i686
>> unknown
>> _END_LOG___
>> 
>> 
>> -----Original Message-----
>> From: Jonathan Larmour [ mailto:jlarmour@redhat.com ]
>> Sent: Wednesday, April 18, 2001 12:56 PM
>> To: Narayana, Venkat A.
>> Cc: 'ecos-discuss@sourceware.cygnus.com'
>> Subject: Re: [ECOS] Help! on building ecosconfigure
>> 
>> 
>> "Narayana, Venkat A." wrote:
>>> Moreover, i think that ecosconfig tool has something to do with
>>> cross-compilation.I reasoned that on the basis of input parameters
>>> that we pass to configure script.I went thru the 'ecos Getting started'
>>> manual and Redboot User's guide, but i didn't find any examples of making
>>> ecosconfigure tool.
>>> So, if i need to build Redboot ROM startup for ARM arch, then, since i
> use
>>> ecosconfig tool( page 23 of Redboot users guide), then shouldn't i
> compile
>>> ecosconfig to take care of cross-compilation? i guessing here.
>> 
>> No, ecosconfig is purely a host-side tool. It has no knowledge of
>> particular targets. Using the prebuilt ones built for Linux and Windows,
> if
>> one of those is your host, should be fine.
>> 
>> Jifl
>> -- 
>> Red Hat, Rustat House, Clifton Road, Cambridge, UK. Tel: +44 (1223) 271062
>> Maybe this world is another planet's Hell -Aldous Huxley || Opinions==mine