* [ECOS] How to install the Redboot for ARM evaluator7T board?
@ 2001-04-23 9:06 Huang Qiang
2001-04-23 9:15 ` Gary Thomas
0 siblings, 1 reply; 2+ messages in thread
From: Huang Qiang @ 2001-04-23 9:06 UTC (permalink / raw)
To: eCos
Hi:
On April 6, 2001 New eCos and RedBoot ports to ARM Evaluator-7T board. And
together with new Prebuilt binaries of RedBoot.
I have tried to download the Redboot and set to start at startup. but no
prompt after startup. the memory map of my target system is listed below:
Header Base Limit
> 018052d8 01800000 0180539c BootStrapLoader v1.0 May 24 2000 14:36:26
> 0180727c 01807000 018072d4 ProductionTest v1.0 May 24 2000 10:47:26
> 0181a570 01810000 0181a5b8 Angel 1.31.1 (20 Mar 2000)
> 01824810 01820000 01824bc0 eCos 1.3 (Jan 27 2000) GDB stubs
> 01838f24 01830000 0183a3e8 RedBoot Apr 5 2001
is anything (address) wrong with my downloaded modules?
thanks a lot!
james
^ permalink raw reply [flat|nested] 2+ messages in thread
* RE: [ECOS] How to install the Redboot for ARM evaluator7T board?
2001-04-23 9:06 [ECOS] How to install the Redboot for ARM evaluator7T board? Huang Qiang
@ 2001-04-23 9:15 ` Gary Thomas
0 siblings, 0 replies; 2+ messages in thread
From: Gary Thomas @ 2001-04-23 9:15 UTC (permalink / raw)
To: Huang Qiang; +Cc: eCos
On 23-Apr-2001 Huang Qiang wrote:
> Hi:
> On April 6, 2001 New eCos and RedBoot ports to ARM Evaluator-7T board. And
> together with new Prebuilt binaries of RedBoot.
> I have tried to download the Redboot and set to start at startup. but no
> prompt after startup. the memory map of my target system is listed below:
>
> Header Base Limit
>> 018052d8 01800000 0180539c BootStrapLoader v1.0 May 24 2000 14:36:26
>> 0180727c 01807000 018072d4 ProductionTest v1.0 May 24 2000 10:47:26
>> 0181a570 01810000 0181a5b8 Angel 1.31.1 (20 Mar 2000)
>> 01824810 01820000 01824bc0 eCos 1.3 (Jan 27 2000) GDB stubs
>> 01838f24 01830000 0183a3e8 RedBoot Apr 5 2001
>
> is anything (address) wrong with my downloaded modules?
There is no reason to have both GDB stubs and RedBoot. I'd expect that
if you simply replace the GDB stubs with the RedBoot image, it'll work.
Note: eCos programs are designed to execute at a particular address. In
particular, RedBoot on the Evaluator is linked to run at 0x1820000 and
thus must be installed at that address in the FLASH.
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2001-04-23 9:15 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2001-04-23 9:06 [ECOS] How to install the Redboot for ARM evaluator7T board? Huang Qiang
2001-04-23 9:15 ` Gary Thomas
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).