From mboxrd@z Thu Jan 1 00:00:00 1970 From: Gary Thomas To: Cristiano Ligieri Pereira Cc: ecos-discuss@sourceware.cygnus.com Subject: RE: [ECOS] Port to XScale board Date: Mon, 20 Aug 2001 17:04:00 -0000 Message-id: References: X-SW-Source: 2001-08/msg00686.html On 20-Aug-2001 Cristiano Ligieri Pereira wrote: > > Which kind of file should I donwload via RedBoot? > Binary or SREC? > Like I mentioned, either mode can be used, but if you don't specify the '-r' flag to the 'load' command, you *must* use S-records. Only use the '-r' flag if the data is raw binary, i.e. not formatted in any way. > ------------------------------------------------------------ > Cristiano Ligieri Pereira - http://www.ics.uci.edu/~cpereira > > On Mon, 20 Aug 2001, Cristiano Ligieri Pereira wrote: > >> >> This 'dots' mean that something was being downloaded? >> >> RedBoot> load -r -v -m xmodem -b 0x00060000 >> CC...........Can't load '': Timed out >> RedBoot> >> >> Looks like it keeps timing out :-( >> >> Cristiano. >> >> ------------------------------------------------------------ >> Cristiano Ligieri Pereira - http://www.ics.uci.edu/~cpereira >> >> On Mon, 20 Aug 2001, Gary Thomas wrote: >> >> > >> > On 20-Aug-2001 Cristiano Ligieri Pereira wrote: >> > > >> > > It's Linux. I'll try minicom. >> > > >> > >> > Cool. With 'minicom', just use ^A-S (send) directly from minicom, without >> > breaking out. I also turn off the little file selection menu and just >> > enter the file name directly as RedBoot will most likely timeout before >> > you can go toodling around the menus and find the file you want to download. >> >>