* [ECOS] can baudrate for 72M
@ 2011-07-18 3:08 cyl cyl
2011-07-19 12:31 ` Sergei Gavrikov
0 siblings, 1 reply; 4+ messages in thread
From: cyl cyl @ 2011-07-18 3:08 UTC (permalink / raw)
To: ecos-discuss
Hi all:
I'm using ecos3.0 on lpc2478, cpu clock was set to 72M (for eth ,
if set lower the eth has underrun problem), but I found it only
supports 60, 30, 15, 48, 24, 12M of can_clk in file
can_lpc2xxx_baudrates.h
Is there a table for 72 or 36 or 18 clk can? Or how to set the
CAN1BTR register if the cpu is 72M?
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [ECOS] can baudrate for 72M
2011-07-18 3:08 [ECOS] can baudrate for 72M cyl cyl
@ 2011-07-19 12:31 ` Sergei Gavrikov
0 siblings, 0 replies; 4+ messages in thread
From: Sergei Gavrikov @ 2011-07-19 12:31 UTC (permalink / raw)
To: cyl cyl; +Cc: ecos-discuss
All is correct with the list. Please, do not post the same question
again and again.
And before you ask, please, follow next points
http://www.catb.org/~esr/faqs/smart-questions.html#before
On Mon, 18 Jul 2011, cyl cyl wrote:
> Hi all:
> I'm using ecos3.0 on lpc2478, cpu clock was set to 72M (for eth ,
> if set lower the eth has underrun problem), but I found it only
> supports 60, 30, 15, 48, 24, 12M of can_clk in file
> can_lpc2xxx_baudrates.h
> Is there a table for 72 or 36 or 18 clk can? Or how to set the
> CAN1BTR register if the cpu is 72M?
As you could see there is not such tables there.
BTW, Uwe described here how he filled-in the CAN tables for lpc2xxx
http://ecos.sourceware.org/ml/ecos-discuss/2007-10/msg00132.html
Please, investigate.
Sergei
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
^ permalink raw reply [flat|nested] 4+ messages in thread
* [ECOS] can baudrate for 72M
@ 2011-07-13 1:48 cyl cyl
0 siblings, 0 replies; 4+ messages in thread
From: cyl cyl @ 2011-07-13 1:48 UTC (permalink / raw)
To: eCos Users
Hi all:
I'm using ecos3.0 on lpc2478, cpu clock was set to 72M (for eth ,
if set lower the eth has underrun problem), but I found it only
supports 60, 30, 15, 48, 24, 12M of can_clk in file
can_lpc2xxx_baudrates.h
Is there a table for 72 or 36 or 18 clk can? Or how to set the
CAN1BTR register if the cpu is 72M?
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
^ permalink raw reply [flat|nested] 4+ messages in thread
* [ECOS] can baudrate for 72M
@ 2011-07-12 2:36 cyl cyl
0 siblings, 0 replies; 4+ messages in thread
From: cyl cyl @ 2011-07-12 2:36 UTC (permalink / raw)
To: eCos Users
Hi all:
I'm using ecos3.0 on lpc2478, cpu clock was set to 72M (for eth ,
if set lower the eth has underrun problem), but I found it only
supports 60, 30, 15, 48, 24, 12M of can_clk in file
can_lpc2xxx_baudrates.h
Is there a table for 72 or 36 or 18 clk can? Or how to set the
CAN1BTR register if the cpu is 72M?
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2011-07-19 12:31 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2011-07-18 3:08 [ECOS] can baudrate for 72M cyl cyl
2011-07-19 12:31 ` Sergei Gavrikov
-- strict thread matches above, loose matches on Subject: below --
2011-07-13 1:48 cyl cyl
2011-07-12 2:36 cyl cyl
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).