* [ECOS] newbie : configure fails with error "Unable to figure out how to do 64 bit arithmetic"
@ 2009-07-13 10:12 Mandeep Sandhu
2009-07-13 10:21 ` [ECOS] " John Dallaway
0 siblings, 1 reply; 4+ messages in thread
From: Mandeep Sandhu @ 2009-07-13 10:12 UTC (permalink / raw)
To: ecos-discuss
Hi All,
I'm a first-timer with ecos.
I've downloaded ecos (along with the pre-built GNU toolchains -
arm-eabi) using the "ecos-install.tcl" script.
As per instructions I made a new "build" dir and tried to run
"configure" from inside it.
It fails with the following error:
...
...
checking for stdint.h... yes
checking for unistd.h... yes
checking whether byte ordering is bigendian... no
checking "for a 64 bit data type"...
configure: error: Unable to figure out how to do 64 bit arithmetic
configure: error: ../../../../tools/src/infra/configure failed for infra
configure: error: ../../../tools/src/configure failed for tools/src
How do I get over this error?
I have compiled Linux kernel, but have no experience with ecos.
Why do I have to run configure/make/make install? I see that the
"ecosconfig" utility is already present. Can't I just use the ARM toolchain
and the ecosconfig tool to build the kernel with the required config?
My main aim is to see the size of the kernel image for my target platform.
Regards,
-mandeep
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
^ permalink raw reply [flat|nested] 4+ messages in thread
* [ECOS] Re: newbie : configure fails with error "Unable to figure out how to do 64 bit arithmetic"
2009-07-13 10:12 [ECOS] newbie : configure fails with error "Unable to figure out how to do 64 bit arithmetic" Mandeep Sandhu
@ 2009-07-13 10:21 ` John Dallaway
2009-07-13 10:41 ` Mandeep Sandhu
0 siblings, 1 reply; 4+ messages in thread
From: John Dallaway @ 2009-07-13 10:21 UTC (permalink / raw)
To: Mandeep Sandhu; +Cc: ecos-discuss
Hi Mandeep
Mandeep Sandhu wrote:
> I'm a first-timer with ecos.
>
> I've downloaded ecos (along with the pre-built GNU toolchains -
> arm-eabi) using the "ecos-install.tcl" script.
>
> As per instructions I made a new "build" dir and tried to run
> "configure" from inside it.
You need to use either the GUI eCos Configuration Tool or the
command-line "ecosconfig" tool to configure the eCos run-time code. Ref:
http://ecos.sourceware.org/docs-latest/user-guide/configuring-and-building-ecos-from-source.html
John Dallaway
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
^ permalink raw reply [flat|nested] 4+ messages in thread
* [ECOS] Re: newbie : configure fails with error "Unable to figure out how to do 64 bit arithmetic"
2009-07-13 10:21 ` [ECOS] " John Dallaway
@ 2009-07-13 10:41 ` Mandeep Sandhu
2009-07-13 10:52 ` Mandeep Sandhu
0 siblings, 1 reply; 4+ messages in thread
From: Mandeep Sandhu @ 2009-07-13 10:41 UTC (permalink / raw)
To: John Dallaway; +Cc: ecos-discuss
Well, after the installation was complete, the "ecosconfig" util was kept
under <install path>/ecos-3.0/tools/bin
I'm trying to use the command line for configuring a target:
~/ecos/ecos-3.0/ecos-work$ ../tools/bin/ecosconfig new atmel
ecos.db: error
couldn't read file
"/home/mandeep/ecos/ecos-3.0/tools/bin/ecos.db": no such file or
directory
Invalid package database.
How do I create the ecos.db file?
Do I need to do make install....isn't the ecosconfig util supposed be
under /usr/local/bin (default) ?
-mandeep
On Mon, Jul 13, 2009 at 3:50 PM, John Dallaway<john@dallaway.org.uk> wrote:
> Hi Mandeep
>
> Mandeep Sandhu wrote:
>
>> I'm a first-timer with ecos.
>>
>> I've downloaded ecos (along with the pre-built GNU toolchains -
>> arm-eabi) using the "ecos-install.tcl" script.
>>
>> As per instructions I made a new "build" dir and tried to run
>> "configure" from inside it.
>
> You need to use either the GUI eCos Configuration Tool or the
> command-line "ecosconfig" tool to configure the eCos run-time code. Ref:
>
> http://ecos.sourceware.org/docs-latest/user-guide/configuring-and-building-ecos-from-source.html
>
> John Dallaway
>
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
^ permalink raw reply [flat|nested] 4+ messages in thread
* [ECOS] Re: newbie : configure fails with error "Unable to figure out how to do 64 bit arithmetic"
2009-07-13 10:41 ` Mandeep Sandhu
@ 2009-07-13 10:52 ` Mandeep Sandhu
0 siblings, 0 replies; 4+ messages in thread
From: Mandeep Sandhu @ 2009-07-13 10:52 UTC (permalink / raw)
To: John Dallaway; +Cc: ecos-discuss
The GUI (configtool" is letting me proceed ahead!...I'm going to try
that now...thanks!
-mandeep
On Mon, Jul 13, 2009 at 4:10 PM, Mandeep
Sandhu<mandeepsandhu.chd@gmail.com> wrote:
> Well, after the installation was complete, the "ecosconfig" util was kept
> under <install path>/ecos-3.0/tools/bin
>
> I'm trying to use the command line for configuring a target:
>
> ~/ecos/ecos-3.0/ecos-work$ ../tools/bin/ecosconfig new atmel
> ecos.db: error
> couldn't read file
> "/home/mandeep/ecos/ecos-3.0/tools/bin/ecos.db": no such file or
> directory
> Invalid package database.
>
> How do I create the ecos.db file?
>
> Do I need to do make install....isn't the ecosconfig util supposed be
> under /usr/local/bin (default) ?
>
> -mandeep
>
> On Mon, Jul 13, 2009 at 3:50 PM, John Dallaway<john@dallaway.org.uk> wrote:
>> Hi Mandeep
>>
>> Mandeep Sandhu wrote:
>>
>>> I'm a first-timer with ecos.
>>>
>>> I've downloaded ecos (along with the pre-built GNU toolchains -
>>> arm-eabi) using the "ecos-install.tcl" script.
>>>
>>> As per instructions I made a new "build" dir and tried to run
>>> "configure" from inside it.
>>
>> You need to use either the GUI eCos Configuration Tool or the
>> command-line "ecosconfig" tool to configure the eCos run-time code. Ref:
>>
>> http://ecos.sourceware.org/docs-latest/user-guide/configuring-and-building-ecos-from-source.html
>>
>> John Dallaway
>>
>
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2009-07-13 10:52 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2009-07-13 10:12 [ECOS] newbie : configure fails with error "Unable to figure out how to do 64 bit arithmetic" Mandeep Sandhu
2009-07-13 10:21 ` [ECOS] " John Dallaway
2009-07-13 10:41 ` Mandeep Sandhu
2009-07-13 10:52 ` Mandeep Sandhu
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).