[ECOS] The problem of network

[ECOS] The problem of network

[jasonlee]

when I running the test of nc6_test_slave ,show the info of follow.
what is the problems?
and my BSD TCP/ip is not works well.
master:
Start Network Characterization - MASTER
================== No load, master at 100% ========================
Start TCP echo [640,1024] - no delays
read: Connection reset by peer
Slave timed out after 1 buffers [read 0 bytes]



slave:
LPC2XXX_ETH: TX error, status 00000000
LPC2XXX_ETH: TX error, status 00000000
LPC2XXX_ETH: TX error, status 00000000
LPC2XXX_ETH: TX error, status 00000000
LPC2XXX_ETH: TX error, status a0000000
LPC2XXX_ETH: TX error, status 00000000
LPC2XXX_ETH: TX error, status a0000000
LPC2XXX_ETH: TX error, status a0000000
LPC2XXX_ETH: TX error, status a0200000
LPC2XXX_ETH: TX error, status 00200000
LPC2XXX_ETH: TX error, status 00000000
LPC2XXX_ETH: TX error, status 00000000
LPC2XXX_ETH: TX error, status 00000000
LPC2XXX_ETH: TX error, status 00000000
LPC2XXX_ETH: TX error, status 00000000
LPC2XXX_ETH: TX error, status 00000000
LPC2XXX_ETH: TX error, status 00000000
LPC2XXX_ETH: TX error, status 00000000
LPC2XXX_ETH: TX error, status a0000000

Thanks for your help~!!
-- 
View this message in context: http://www.nabble.com/The-problem-of-network-tp24303205p24303205.html
Sent from the Sourceware - ecos-discuss mailing list archive at Nabble.com.


-- 
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss

Re: [ECOS] The problem of network

[Alexander Aganichev]

I run into the same problem. Until two weeks ago everything worked
just fine, and now it do the same all the time. The TCP stack seems to
work (sends SYN/ACK/FIN as expected but looks like it do not notify
upper layer about received packets). Is there any solution so far?

On Thu, Jul 2, 2009 at 12:37 PM, jasonlee<famudingding2008@sina.com> wrote:
>
> when I running the test of nc6_test_slave ,show the info of follow.
> what is the problems?
> and my BSD TCP/ip is not works well.
> master:
> Start Network Characterization - MASTER
> ================== No load, master at 100% ========================
> Start TCP echo [640,1024] - no delays
> read: Connection reset by peer
> Slave timed out after 1 buffers [read 0 bytes]
>
>
>
> slave:
> LPC2XXX_ETH: TX error, status 00000000
> LPC2XXX_ETH: TX error, status 00000000
> LPC2XXX_ETH: TX error, status 00000000
> LPC2XXX_ETH: TX error, status 00000000
> LPC2XXX_ETH: TX error, status a0000000
> LPC2XXX_ETH: TX error, status 00000000
> LPC2XXX_ETH: TX error, status a0000000
> LPC2XXX_ETH: TX error, status a0000000
> LPC2XXX_ETH: TX error, status a0200000
> LPC2XXX_ETH: TX error, status 00200000
> LPC2XXX_ETH: TX error, status 00000000
> LPC2XXX_ETH: TX error, status 00000000
> LPC2XXX_ETH: TX error, status 00000000
> LPC2XXX_ETH: TX error, status 00000000
> LPC2XXX_ETH: TX error, status 00000000
> LPC2XXX_ETH: TX error, status 00000000
> LPC2XXX_ETH: TX error, status 00000000
> LPC2XXX_ETH: TX error, status 00000000
> LPC2XXX_ETH: TX error, status a0000000
>
> Thanks for your help~!!
> --
> View this message in context: http://www.nabble.com/The-problem-of-network-tp24303205p24303205.html
> Sent from the Sourceware - ecos-discuss mailing list archive at Nabble.com.
>
>
> --
> Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
> and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
>
>



-- 
WBR, Alexander

-- 
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss