* [ECOS] SPI @ 2008-06-04 10:16 Huguenin Frédéric 2008-06-04 11:02 ` Tom Deconinck 0 siblings, 1 reply; 4+ messages in thread From: Huguenin Frédéric @ 2008-06-04 10:16 UTC (permalink / raw) To: ecos-discuss Hello, How do you use the SPI bus for ARM with eCos ? -- Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss ^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [ECOS] SPI 2008-06-04 10:16 [ECOS] SPI Huguenin Frédéric @ 2008-06-04 11:02 ` Tom Deconinck [not found] ` <EEDC4D88C587AB4F96F5E092A0514BE503B0CDB6@01-orion.intra.eiaj.ch> 0 siblings, 1 reply; 4+ messages in thread From: Tom Deconinck @ 2008-06-04 11:02 UTC (permalink / raw) To: Huguenin Frédéric, ecos-discuss Which ARM processor are you using? For the Atmel family, there's an SPI driver available: devs/spi/arm/at91/ On Wed, Jun 4, 2008 at 12:16 PM, Huguenin Frédéric <Frederic.Huguenin@he-arc.ch> wrote: > Hello, > > How do you use the SPI bus for ARM with eCos ? > > -- > Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos > and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss > > -- Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss ^ permalink raw reply [flat|nested] 4+ messages in thread
[parent not found: <EEDC4D88C587AB4F96F5E092A0514BE503B0CDB6@01-orion.intra.eiaj.ch>]
* [ECOS] Re: RE : [ECOS] SPI [not found] ` <EEDC4D88C587AB4F96F5E092A0514BE503B0CDB6@01-orion.intra.eiaj.ch> @ 2008-06-04 13:30 ` Tom Deconinck [not found] ` <EEDC4D88C587AB4F96F5E092A0514BE503B0CDBA@01-orion.intra.eiaj.ch> 0 siblings, 1 reply; 4+ messages in thread From: Tom Deconinck @ 2008-06-04 13:30 UTC (permalink / raw) To: Huguenin Frédéric, ecos-discuss eCoscentric has some pretty decent documentation about eCos and SPI: http://ecoscentric.com/ecospro/doc.cgi/html/ref/spi.html To enable the driver you have to add these CDL packages to your platform: CYGPKG_IO_SPI : enables the SPI generic interface layer CYGPKG_DEVS_SPI_ARM_AT91 : enables the at91 SPI bus driver You'll have to define an extra package to export your SPI devices, like you do for i2c. A good starting point might be the at91sam7sek target. On Wed, Jun 4, 2008 at 2:42 PM, Huguenin Frédéric <Frederic.Huguenin@he-arc.ch> wrote: > Thanks I'm using the atmel. Does this driver have documentation ? > > > -------- Message d'origine-------- > De: Tom Deconinck [mailto:t.deconinck@gmail.com] > Date: mer. 04/06/2008 13:01 > À: Huguenin Frédéric; ecos-discuss@sourceware.org > Objet : Re: [ECOS] SPI > > Which ARM processor are you using? > > For the Atmel family, there's an SPI driver available: devs/spi/arm/at91/ > > On Wed, Jun 4, 2008 at 12:16 PM, Huguenin Frédéric > <Frederic.Huguenin@he-arc.ch> wrote: >> Hello, >> >> How do you use the SPI bus for ARM with eCos ? >> >> -- >> Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos >> and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss >> >> > > -- Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss ^ permalink raw reply [flat|nested] 4+ messages in thread
[parent not found: <EEDC4D88C587AB4F96F5E092A0514BE503B0CDBA@01-orion.intra.eiaj.ch>]
* [ECOS] Re: RE : RE : [ECOS] SPI [not found] ` <EEDC4D88C587AB4F96F5E092A0514BE503B0CDBA@01-orion.intra.eiaj.ch> @ 2008-06-04 20:23 ` Tom Deconinck 0 siblings, 0 replies; 4+ messages in thread From: Tom Deconinck @ 2008-06-04 20:23 UTC (permalink / raw) To: Huguenin Frédéric, ecos-discuss You can just use C-code, but if you are using a target that is already supported there is a big chance there's a cdl package define all devices for that specific hardware target. For my hardware, I usually create such a cdl package. See the the ecoscentric documentation about SPI. I was just referring to the at91sam7sek target as an example on how to add the required SPI cdl packages to your target. On Wed, Jun 4, 2008 at 4:14 PM, Huguenin Frédéric <Frederic.Huguenin@he-arc.ch> wrote: > I don't understand : > > --You'll have to define an extra package to export your SPI devices, > --like you do for i2c. > --A good starting point might be the at91sam7sek target. > > Do I have to create an eCos package ? Or it's just > as standard C package in my project. > > > -------- Message d'origine-------- > De: Tom Deconinck [mailto:t.deconinck@gmail.com] > Date: mer. 04/06/2008 15:29 > À: Huguenin Frédéric; ecos-discuss@sourceware.org > Objet : Re: RE : [ECOS] SPI > > eCoscentric has some pretty decent documentation about eCos and SPI: > http://ecoscentric.com/ecospro/doc.cgi/html/ref/spi.html > > To enable the driver you have to add these CDL packages to your platform: > > CYGPKG_IO_SPI : enables the SPI generic interface layer > CYGPKG_DEVS_SPI_ARM_AT91 : enables the at91 SPI bus driver > > You'll have to define an extra package to export your SPI devices, > like you do for i2c. > A good starting point might be the at91sam7sek target. > > On Wed, Jun 4, 2008 at 2:42 PM, Huguenin Frédéric > <Frederic.Huguenin@he-arc.ch> wrote: >> Thanks I'm using the atmel. Does this driver have documentation ? >> >> >> -------- Message d'origine-------- >> De: Tom Deconinck [mailto:t.deconinck@gmail.com] >> Date: mer. 04/06/2008 13:01 >> À: Huguenin Frédéric; ecos-discuss@sourceware.org >> Objet : Re: [ECOS] SPI >> >> Which ARM processor are you using? >> >> For the Atmel family, there's an SPI driver available: devs/spi/arm/at91/ >> >> On Wed, Jun 4, 2008 at 12:16 PM, Huguenin Frédéric >> <Frederic.Huguenin@he-arc.ch> wrote: >>> Hello, >>> >>> How do you use the SPI bus for ARM with eCos ? >>> >>> -- >>> Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos >>> and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss >>> >>> >> >> > > -- Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss ^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2008-06-04 20:23 UTC | newest] Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2008-06-04 10:16 [ECOS] SPI Huguenin Frédéric 2008-06-04 11:02 ` Tom Deconinck [not found] ` <EEDC4D88C587AB4F96F5E092A0514BE503B0CDB6@01-orion.intra.eiaj.ch> 2008-06-04 13:30 ` [ECOS] Re: RE : " Tom Deconinck [not found] ` <EEDC4D88C587AB4F96F5E092A0514BE503B0CDBA@01-orion.intra.eiaj.ch> 2008-06-04 20:23 ` [ECOS] Re: RE : " Tom Deconinck
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).