* [ECOS] Serial tests fail on ARM AEB
@ 2000-06-22 1:15 Anders Holmberg (QMW)
2000-06-22 2:04 ` Jesper Skov
0 siblings, 1 reply; 5+ messages in thread
From: Anders Holmberg (QMW) @ 2000-06-22 1:15 UTC (permalink / raw)
To: 'ecos-discuss@sourceware.cygnus.com'
Hi,
I am having problems running the serial tests on my ARM AEB revision C board. When serial2.exe is executed I receive the following message:
FAIL:<Can't lookup /dev/ser1> Line: 1118, File: //C/ecos/packages/io/serial/v1_3_1/tests/ser_test_protocol.inl
EXIT:<done>
I am using eCos 1.3.1 and have only made the following changes to the ARM AEB default template:
- AEB board revision = C
- Activate AEB serial port 0 and 1
When I look a bit closer using gdb it seems like there is no devices installed at all (__DEVTAB__ and __DEVTAB_END__ points to the same address in space, see below).
(gdb) info address __DEVTAB__
Symbol "__DEVTAB__" is at 0x120f8 in a file compiled without debugging.
(gdb) info address __DEVTAB_END__
Symbol "__DEVTAB_END__" is at 0x120f8 in a file compiled without debugging.
and the variables aeb_serial_io0 and aeb_serial_io1 are undefined. This of course makes the function cyg_io_lookup fail which in the end gives me the error message above.
Environment
- WinNT
- Cygwin 1.1.2
- eCos 1.3.1
- arm-elf-gcc 2.96
/Anders Holmberg
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [ECOS] Serial tests fail on ARM AEB
2000-06-22 1:15 [ECOS] Serial tests fail on ARM AEB Anders Holmberg (QMW)
@ 2000-06-22 2:04 ` Jesper Skov
0 siblings, 0 replies; 5+ messages in thread
From: Jesper Skov @ 2000-06-22 2:04 UTC (permalink / raw)
To: Anders Holmberg (QMW); +Cc: 'ecos-discuss@sourceware.cygnus.com'
>>>>> "Anders" == Anders Holmberg (QMW) <Anders.Holmberg@emw.ericsson.se> writes:
Anders> Hi, I am having problems running the serial tests on my ARM
Anders> AEB revision C board. When serial2.exe is executed I receive
Anders> the following message:
Did you set the CYGPKG_IO_SERIAL_DEVICES option?
Jesper
^ permalink raw reply [flat|nested] 5+ messages in thread
* RE: [ECOS] Serial tests fail on ARM AEB
[not found] <218E0A05F1A3D311B83F00508B6FAB814F8073@esemont200.gbg.edt.ericsson.se>
@ 2000-06-22 5:13 ` Jesper Skov
0 siblings, 0 replies; 5+ messages in thread
From: Jesper Skov @ 2000-06-22 5:13 UTC (permalink / raw)
To: Anders Holmberg (QMW); +Cc: ecos-discuss
>>>>> "Anders" == Anders Holmberg \(QMW\) <Anders> writes:
Anders> Yes, I have made the following changes to the ARM AEB default
Anders> template. CYGHWR_HAL_ARM_AEB_REVISION C
Anders> CYGPKG_IO_SERIAL_ARM_AEB Enabled
Anders> CYGPKG_IO_SERIAL_ARM_AEB_SERIAL1 Enabled
Sorry, no further suggestions. It may be just plain broken.
Have a look at the pre-processed version of aeb_serial.c
(io/devs/serial/.../src/arm), you may be able to spot why it's broken.
Jesper
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [ECOS] Serial tests fail on ARM AEB
2000-06-22 3:37 Anders Holmberg (QMW)
@ 2000-06-22 5:01 ` Jesper Skov
0 siblings, 0 replies; 5+ messages in thread
From: Jesper Skov @ 2000-06-22 5:01 UTC (permalink / raw)
To: Anders Holmberg (QMW); +Cc: 'ecos-discuss@sourceware.cygnus.com'
>>>>> "Anders" == Anders Holmberg (QMW) <Anders.Holmberg@emw.ericsson.se> writes:
Anders> I cannot find the CYGPKG_IO_SERIAL_DEVICES option in the
Anders> config tool. Did you mean the CYGPKG_IO_SERIAL option? This is
Anders> not changeable (?). If you mean the CYGPKG_IO_SERIAL_ARM_AEB
Anders> it has been activated. /Anders H
Sorry, I was thinking of the changes happening after 1.3.1.
But did you also enable CYGPKG_IO_SERIAL_ARM_AEB_SERIAL1?
Jesper
^ permalink raw reply [flat|nested] 5+ messages in thread
* RE: [ECOS] Serial tests fail on ARM AEB
@ 2000-06-22 3:37 Anders Holmberg (QMW)
2000-06-22 5:01 ` Jesper Skov
0 siblings, 1 reply; 5+ messages in thread
From: Anders Holmberg (QMW) @ 2000-06-22 3:37 UTC (permalink / raw)
To: 'Jesper Skov'; +Cc: 'ecos-discuss@sourceware.cygnus.com'
I cannot find the CYGPKG_IO_SERIAL_DEVICES option in the config tool. Did you mean the CYGPKG_IO_SERIAL option? This is not changeable (?). If you mean the CYGPKG_IO_SERIAL_ARM_AEB it has been activated.
/Anders H
-----Original Message-----
From: Jesper Skov [ mailto:jskov@redhat.com ]
Sent: Thursday, June 22, 2000 11:04 AM
To: Anders Holmberg (QMW)
Cc: 'ecos-discuss@sourceware.cygnus.com'
Subject: Re: [ECOS] Serial tests fail on ARM AEB
>>>>> "Anders" == Anders Holmberg (QMW) <Anders.Holmberg@emw.ericsson.se> writes:
Anders> Hi, I am having problems running the serial tests on my ARM
Anders> AEB revision C board. When serial2.exe is executed I receive
Anders> the following message:
Did you set the CYGPKG_IO_SERIAL_DEVICES option?
Jesper
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2000-06-22 5:13 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2000-06-22 1:15 [ECOS] Serial tests fail on ARM AEB Anders Holmberg (QMW)
2000-06-22 2:04 ` Jesper Skov
2000-06-22 3:37 Anders Holmberg (QMW)
2000-06-22 5:01 ` Jesper Skov
[not found] <218E0A05F1A3D311B83F00508B6FAB814F8073@esemont200.gbg.edt.ericsson.se>
2000-06-22 5:13 ` Jesper Skov
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).