From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (qmail 27569 invoked by alias); 19 Nov 2001 10:02:09 -0000 Mailing-List: contact ecos-discuss-help@sourceware.cygnus.com; run by ezmlm Precedence: bulk List-Subscribe: List-Archive: List-Post: List-Help: , Sender: ecos-discuss-owner@sources.redhat.com Received: (qmail 27524 invoked from network); 19 Nov 2001 10:02:07 -0000 Received: from unknown (HELO executor.cambridge.redhat.com) (195.224.55.237) by sourceware.cygnus.com with SMTP; 19 Nov 2001 10:02:07 -0000 Received: from zoftcorp.dk (dell-paw-2.cambridge.redhat.com [195.224.55.226]) by executor.cambridge.redhat.com (Postfix) with ESMTP id 6DEFAABAFC for ; Mon, 19 Nov 2001 10:02:06 +0000 (GMT) Received: by zoftcorp.dk (Postfix, from userid 402) id 196EB6CC2F; Mon, 19 Nov 2001 11:02:06 +0100 (CET) To: Eric BENARD / FREE Cc: ecos-discuss@sources.redhat.com References: <3BF87614.2070300@free.fr> From: Jesper Skov Date: Mon, 12 Nov 2001 08:51:00 -0000 In-Reply-To: <3BF87614.2070300@free.fr> Message-ID: User-Agent: Gnus/5.09 (Gnus v5.9.0) Emacs/21.1 MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Subject: Re: [ECOS] RedBoot for Assabet (strongarm) problem X-SW-Source: 2001-11/txt/msg00137.txt.bz2 >>>>> "Eric" == Eric BENARD / FREE writes: Eric> I tried to flash redboot.bin to my Assabet board using JFlash. Eric> It flashs properly but nothing happens on the serial port even Eric> after reseting the board. I don't know the Assabet board, but if the flash is 16/32 bit wide, this could be due to an endian issue (if so, there's probably an option in the flash software to swap bytes before programming them into the flash). Jesper