* Re: How to add patches to cvs-log [not found] <op.u70cspe28qukij@w27> @ 2010-02-12 10:32 ` John Dallaway 2010-02-12 10:59 ` Sergei Gavrikov 0 siblings, 1 reply; 4+ messages in thread From: John Dallaway @ 2010-02-12 10:32 UTC (permalink / raw) To: bob.brusa; +Cc: eCos Maintainers Hi Robert Bob Brusa wrote: > on 14-Jan-2010 I sent a patch (devs_current_100114.epk) to ecos-patches > at sources dot redhat dot com. I assumed it would then go (after review > by an expert!) into the "current" cvs ecos repository. This does not > seem to be the case as I learned yesterday when updating my ecos from > the cvs. Did I follow a wrong procedure or does it just take some more > time? Firstly, thank you for taking the time to contribute a patch for eCos. Unfortunately, patch review can take some time. The eCos maintainers which are best placed to review your changes may be busy. I would suggest that you re-post your changes to the ecos-patches list in the form of a plain text attachment (generated using "diff -U5 -r") rather than as an EPK file. This will make it much easier for individual maintainers to review your changes at a glance. John Dallaway eCos maintainer ^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: How to add patches to cvs-log 2010-02-12 10:32 ` How to add patches to cvs-log John Dallaway @ 2010-02-12 10:59 ` Sergei Gavrikov 2010-02-12 15:59 ` Bob Brusa 0 siblings, 1 reply; 4+ messages in thread From: Sergei Gavrikov @ 2010-02-12 10:59 UTC (permalink / raw) To: John Dallaway; +Cc: bob.brusa, eCos Maintainers On Fri, Feb 12, 2010 at 10:32:28AM +0000, John Dallaway wrote: > Hi Robert > > Bob Brusa wrote: > > > on 14-Jan-2010 I sent a patch (devs_current_100114.epk) to ecos-patches > > at sources dot redhat dot com. I assumed it would then go (after review > > by an expert!) into the "current" cvs ecos repository. This does not > > seem to be the case as I learned yesterday when updating my ecos from > > the cvs. Did I follow a wrong procedure or does it just take some more > > time? > > Firstly, thank you for taking the time to contribute a patch for eCos. > > Unfortunately, patch review can take some time. The eCos maintainers > which are best placed to review your changes may be busy. I would > suggest that you re-post your changes to the ecos-patches list in the > form of a plain text attachment (generated using "diff -U5 -r") rather > than as an EPK file. This will make it much easier for individual > maintainers to review your changes at a glance. > > John Dallaway > eCos maintainer Hi Robert and John, A few years ago I knew about one link by the topic: http://ecos.sourceware.org/patches.html Unfortunately I cannot call where I 'bookmarked' it in my mind from. Just now I tried to find the reference looking the eCos front pages, and I couldn't find a reference on the link. But, Robert, That's it. HTH Sergei ^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: How to add patches to cvs-log 2010-02-12 10:59 ` Sergei Gavrikov @ 2010-02-12 15:59 ` Bob Brusa 2010-02-12 17:25 ` John Dallaway 0 siblings, 1 reply; 4+ messages in thread From: Bob Brusa @ 2010-02-12 15:59 UTC (permalink / raw) To: Sergei Gavrikov, John Dallaway; +Cc: eCos Maintainers Am 12.02.2010, 11:59 Uhr, schrieb Sergei Gavrikov <sergei.gavrikov@gmail.com>: > On Fri, Feb 12, 2010 at 10:32:28AM +0000, John Dallaway wrote: >> Hi Robert >> >> Bob Brusa wrote: >> >> > on 14-Jan-2010 I sent a patch (devs_current_100114.epk) to >> ecos-patches >> > at sources dot redhat dot com. I assumed it would then go (after >> review >> > by an expert!) into the "current" cvs ecos repository. This does not >> > seem to be the case as I learned yesterday when updating my ecos from >> > the cvs. Did I follow a wrong procedure or does it just take some more >> > time? >> >> Firstly, thank you for taking the time to contribute a patch for eCos. >> >> Unfortunately, patch review can take some time. The eCos maintainers >> which are best placed to review your changes may be busy. I would >> suggest that you re-post your changes to the ecos-patches list in the >> form of a plain text attachment (generated using "diff -U5 -r") rather >> than as an EPK file. This will make it much easier for individual >> maintainers to review your changes at a glance. >> >> John Dallaway >> eCos maintainer > > Hi Robert and John, > > A few years ago I knew about one link by the topic: > http://ecos.sourceware.org/patches.html > > Unfortunately I cannot call where I 'bookmarked' it in my mind from. > Just now I tried to find the reference looking the eCos front pages, > and I couldn't find a reference on the link. ==> indeed, this link got lost - there is no path to this page and hence no newbie will ever find it. > But, Robert, That's it. > > HTH > > Sergei Hi Sergei and John I would expect that in my case, the diff-command could look as follows: C:\cygwin\ecoscvs\ecos\packages>cvs -q diff -u5 -p devs\eth\arm\at91 >> my.patch However, this lists everything in this directory as "modified" - simply because my windows based editor has changed linefeeds by the cr-lf sequences. So I leave it for now and hope that the expert will cope with the epk-file I handed in. After all, the relevant changes do affect the file if_at91.c only. Regards Robert ^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: How to add patches to cvs-log 2010-02-12 15:59 ` Bob Brusa @ 2010-02-12 17:25 ` John Dallaway 0 siblings, 0 replies; 4+ messages in thread From: John Dallaway @ 2010-02-12 17:25 UTC (permalink / raw) To: bob.brusa; +Cc: Sergei Gavrikov, eCos Maintainers Hi Robert Bob Brusa wrote: > I would expect that in my case, the diff-command could look as follows: > > C:\cygwin\ecoscvs\ecos\packages>cvs -q diff -u5 -p devs\eth\arm\at91 >> > my.patch > > However, this lists everything in this directory as "modified" - simply > because my windows based editor has changed linefeeds by the cr-lf > sequences. You can ignore line endings and other whitespace differences using the "-w" switch: cvs -q diff -u5 -w devs/eth/arm/at91 John Dallaway ^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2010-02-12 17:25 UTC | newest] Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- [not found] <op.u70cspe28qukij@w27> 2010-02-12 10:32 ` How to add patches to cvs-log John Dallaway 2010-02-12 10:59 ` Sergei Gavrikov 2010-02-12 15:59 ` Bob Brusa 2010-02-12 17:25 ` John Dallaway
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).