* Re: boot loader
[not found] ` <C43529A246480145B0A6D0234BDB0F0D481CD3@MELANITE.micrel.com>
@ 2010-03-29 16:01 ` John Dallaway
2010-04-07 0:17 ` submit process Choi, David
0 siblings, 1 reply; 3+ messages in thread
From: John Dallaway @ 2010-03-29 16:01 UTC (permalink / raw)
To: Choi, David; +Cc: Li, Charles, eCos Maintainers
Hi David
Choi, David wrote:
> Under eCos, I make a network device driver for ks8851 MLL from Micrel
> Inc.
>
> I want to put my driver in eCos source tree.
>
> Could you tell me the procedure to put my driver in eCos so that
> everybody can use it?
Firstly, thank you for your interest in contributing to the eCos project.
The basic procedure for contributing code is described at:
http://ecos.sourceware.org/contrib.html
Note that all contributions are subject to review and that everyone who
has contributed to the device driver will need to assign copyright to
the Free Software Foundation.
I recommend that you start the process of copyright assignment as soon
as possible as it can take some time to complete. Ref:
http://ecos.sourceware.org/assign.html
When your driver is ready for review, please create a new Bugzilla
report at http://bugs.ecos.sourceware.org and attach your source code to
the Bugzilla report.
John Dallaway
eCos maintainer
^ permalink raw reply [flat|nested] 3+ messages in thread
* submit process
2010-03-29 16:01 ` boot loader John Dallaway
@ 2010-04-07 0:17 ` Choi, David
2010-04-07 7:16 ` John Dallaway
0 siblings, 1 reply; 3+ messages in thread
From: Choi, David @ 2010-04-07 0:17 UTC (permalink / raw)
To: John Dallaway; +Cc: Li, Charles, eCos Maintainers
Hello John,
Based on your suggestion, I filled [the assignment request form] and
sent it to assign@gnu.org last week.
But I have not received any feedback until today. I want to check the
status.
What should I do?
Is it possible to submit my driver before finishing [process of
copyright assignment]?
Thank you in advance for your reply.
Regards,
David J. Choi
-----Original Message-----
From: John Dallaway [mailto:john@dallaway.org.uk]
Sent: Monday, March 29, 2010 9:02 AM
To: Choi, David
Cc: Li, Charles; eCos Maintainers
Subject: Re: boot loader
Hi David
Choi, David wrote:
> Under eCos, I make a network device driver for ks8851 MLL from Micrel
> Inc.
>
> I want to put my driver in eCos source tree.
>
> Could you tell me the procedure to put my driver in eCos so that
> everybody can use it?
Firstly, thank you for your interest in contributing to the eCos
project.
The basic procedure for contributing code is described at:
http://ecos.sourceware.org/contrib.html
Note that all contributions are subject to review and that everyone who
has contributed to the device driver will need to assign copyright to
the Free Software Foundation.
I recommend that you start the process of copyright assignment as soon
as possible as it can take some time to complete. Ref:
http://ecos.sourceware.org/assign.html
When your driver is ready for review, please create a new Bugzilla
report at http://bugs.ecos.sourceware.org and attach your source code to
the Bugzilla report.
John Dallaway
eCos maintainer
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: submit process
2010-04-07 0:17 ` submit process Choi, David
@ 2010-04-07 7:16 ` John Dallaway
0 siblings, 0 replies; 3+ messages in thread
From: John Dallaway @ 2010-04-07 7:16 UTC (permalink / raw)
To: Choi, David; +Cc: Li, Charles, eCos Maintainers
Hi David
Choi, David wrote:
> Based on your suggestion, I filled [the assignment request form] and
> sent it to assign@gnu.org last week.
>
> But I have not received any feedback until today. I want to check the
> status. What should I do?
The FSF will prepare a copyright assignment document and send it to you
by the regular postal service. This can sometimes take a while. I would
not assume that the process has failed just yet.
> Is it possible to submit my driver before finishing [process of
> copyright assignment]?
Yes, feel free to submit the driver. It may be of use to other eCos
users in advance of the copyright assignment.
John Dallaway
eCos maintainer
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2010-04-07 7:16 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
[not found] <C43529A246480145B0A6D0234BDB0F0D481CAC@MELANITE.micrel.com>
[not found] ` <4B6BD6D8.3010906@dallaway.org.uk>
[not found] ` <C43529A246480145B0A6D0234BDB0F0D481CAD@MELANITE.micrel.com>
[not found] ` <4B6C5F41.5020000@dallaway.org.uk>
[not found] ` <C43529A246480145B0A6D0234BDB0F0D481CD3@MELANITE.micrel.com>
2010-03-29 16:01 ` boot loader John Dallaway
2010-04-07 0:17 ` submit process Choi, David
2010-04-07 7:16 ` John Dallaway
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).