[Bug target/58587] Bootstrap error with ada with -mcpu=power7

public inbox for gcc-bugs@sourceware.org
help / color / mirror / Atom feed

* [Bug target/58587] Bootstrap error with ada with -mcpu=power7
       [not found] <bug-58587-4@http.gcc.gnu.org/bugzilla/>
@ 2013-10-01  4:49 ` mpolacek at gcc dot gnu.org
  2013-10-01  7:08 ` jakub at gcc dot gnu.org
                   ` (6 subsequent siblings)
  7 siblings, 0 replies; 8+ messages in thread
From: mpolacek at gcc dot gnu.org @ 2013-10-01  4:49 UTC (permalink / raw)
  To: gcc-bugs

http://gcc.gnu.org/bugzilla/show_bug.cgi?id=58587

Marek Polacek <mpolacek at gcc dot gnu.org> changed:

           What    |Removed                     |Added
----------------------------------------------------------------------------
             Status|UNCONFIRMED                 |NEW
   Last reconfirmed|                            |2013-10-01
                 CC|                            |mpolacek at gcc dot gnu.org
     Ever confirmed|0                           |1


^ permalink raw reply	[flat|nested] 8+ messages in thread

* [Bug target/58587] Bootstrap error with ada with -mcpu=power7
       [not found] <bug-58587-4@http.gcc.gnu.org/bugzilla/>
  2013-10-01  4:49 ` [Bug target/58587] Bootstrap error with ada with -mcpu=power7 mpolacek at gcc dot gnu.org
@ 2013-10-01  7:08 ` jakub at gcc dot gnu.org
  2013-10-02 19:46 ` meissner at gcc dot gnu.org
                   ` (5 subsequent siblings)
  7 siblings, 0 replies; 8+ messages in thread
From: jakub at gcc dot gnu.org @ 2013-10-01  7:08 UTC (permalink / raw)
  To: gcc-bugs

http://gcc.gnu.org/bugzilla/show_bug.cgi?id=58587

--- Comment #2 from Jakub Jelinek <jakub at gcc dot gnu.org> ---
So we have:
(insn 720 719 728 107 (set (reg:TI 132 [ D.24779 ])
        (const_double -16 [0xfffffffffffffff0] 7 [0x7] 0 [0] 0 [0]))
par.adb:1509 721 {*vsx_movti_64bit}
     (nil))

Reloads for insn # 720
Reload 0: reload_in (DI) = (plus:DI (reg/f:DI 31 31)
                                                    (const_int 1552 [0x610]))
        BASE_REGS, RELOAD_FOR_OPERAND_ADDRESS (opnum = 0), can't combine
        reload_in_reg: (plus:DI (reg/f:DI 31 31)
                                                    (const_int 1552 [0x610]))
        reload_reg_rtx: (reg:DI 9 9)
Reload 1: reload_in (TI) = (const_double -16 [0xfffffffffffffff0] 7 [0x7] 0 [0]
0 [0])
        ALTIVEC_REGS, RELOAD_FOR_INPUT (opnum = 1)
        reload_in_reg: (const_double -16 [0xfffffffffffffff0] 7 [0x7] 0 [0] 0
[0])
        reload_reg_rtx: (reg:TI 77 0)

and turn that into:
(insn 1505 719 1504 107 (set (reg:TI 77 0)
        (const_double -16 [0xfffffffffffffff0] 7 [0x7] 0 [0] 0 [0]))
par.adb:1509 721 {*vsx_movti_64bit}
     (nil))
(insn 1504 1505 720 107 (set (reg:DI 9 9)
        (plus:DI (reg/f:DI 31 31)
            (const_int 1552 [0x610]))) par.adb:1509 82 {*adddi3_internal1}
     (nil))
(insn 720 1504 728 107 (set (mem/c:TI (reg:DI 9 9) [0 %sfp+1552 S16 A128])
        (reg:TI 77 0)) par.adb:1509 721 {*vsx_movti_64bit}
     (nil))


^ permalink raw reply	[flat|nested] 8+ messages in thread

* [Bug target/58587] Bootstrap error with ada with -mcpu=power7
       [not found] <bug-58587-4@http.gcc.gnu.org/bugzilla/>
  2013-10-01  4:49 ` [Bug target/58587] Bootstrap error with ada with -mcpu=power7 mpolacek at gcc dot gnu.org
  2013-10-01  7:08 ` jakub at gcc dot gnu.org
@ 2013-10-02 19:46 ` meissner at gcc dot gnu.org
  2013-10-02 19:55 ` meissner at gcc dot gnu.org
                   ` (4 subsequent siblings)
  7 siblings, 0 replies; 8+ messages in thread
From: meissner at gcc dot gnu.org @ 2013-10-02 19:46 UTC (permalink / raw)
  To: gcc-bugs

http://gcc.gnu.org/bugzilla/show_bug.cgi?id=58587

Michael Meissner <meissner at gcc dot gnu.org> changed:

           What    |Removed                     |Added
----------------------------------------------------------------------------
             Status|NEW                         |ASSIGNED
           Assignee|unassigned at gcc dot gnu.org      |meissner at gcc dot gnu.org


^ permalink raw reply	[flat|nested] 8+ messages in thread

* [Bug target/58587] Bootstrap error with ada with -mcpu=power7
       [not found] <bug-58587-4@http.gcc.gnu.org/bugzilla/>
                   ` (2 preceding siblings ...)
  2013-10-02 19:46 ` meissner at gcc dot gnu.org
@ 2013-10-02 19:55 ` meissner at gcc dot gnu.org
  2013-10-03  0:01 ` meissner at gcc dot gnu.org
                   ` (3 subsequent siblings)
  7 siblings, 0 replies; 8+ messages in thread
From: meissner at gcc dot gnu.org @ 2013-10-02 19:55 UTC (permalink / raw)
  To: gcc-bugs

http://gcc.gnu.org/bugzilla/show_bug.cgi?id=58587

--- Comment #3 from Michael Meissner <meissner at gcc dot gnu.org> ---
Created attachment 30948
  --> http://gcc.gnu.org/bugzilla/attachment.cgi?id=30948&action=edit
Patch to disable -mvsx-timode

This patch disables setting -mvsx-timode, which is what is causing the problem.
 The option -mvsx-timode allows 128-bit integers (TImode) to be in the VSX
registers.  The main motivation for the option is to add support for the
128-bit arithmetic instructions in ISA 2.07 (power8), such as vadduqm.  Right
now, GCC does not support these instructions.  In order to support putting
TImode values in VSX registers, we will need some work with the rs6000
secondary reload target hooks, which is planned for the future.

^ permalink raw reply	[flat|nested] 8+ messages in thread

* [Bug target/58587] Bootstrap error with ada with -mcpu=power7
       [not found] <bug-58587-4@http.gcc.gnu.org/bugzilla/>
                   ` (3 preceding siblings ...)
  2013-10-02 19:55 ` meissner at gcc dot gnu.org
@ 2013-10-03  0:01 ` meissner at gcc dot gnu.org
  2013-10-03  0:08 ` meissner at gcc dot gnu.org
                   ` (2 subsequent siblings)
  7 siblings, 0 replies; 8+ messages in thread
From: meissner at gcc dot gnu.org @ 2013-10-03  0:01 UTC (permalink / raw)
  To: gcc-bugs

http://gcc.gnu.org/bugzilla/show_bug.cgi?id=58587

--- Comment #4 from Michael Meissner <meissner at gcc dot gnu.org> ---
Author: meissner
Date: Thu Oct  3 00:01:45 2013
New Revision: 203142

URL: http://gcc.gnu.org/viewcvs?rev=203142&root=gcc&view=rev
Log:
2013-10-02  Michael Meissner  <meissner@linux.vnet.ibm.com>

    PR target/58587
    * config/rs6000/rs6000-cpus.def (ISA_2_6_MASKS_SERVER): Turn off
    setting -mvsx-timode by default until the underlying problem is
    fixed.
    (RS6000_CPU, power7 defaults): Likewise.


Modified:
    trunk/gcc/ChangeLog
    trunk/gcc/config/rs6000/rs6000-cpus.def


^ permalink raw reply	[flat|nested] 8+ messages in thread

* [Bug target/58587] Bootstrap error with ada with -mcpu=power7
       [not found] <bug-58587-4@http.gcc.gnu.org/bugzilla/>
                   ` (4 preceding siblings ...)
  2013-10-03  0:01 ` meissner at gcc dot gnu.org
@ 2013-10-03  0:08 ` meissner at gcc dot gnu.org
  2013-10-11 20:46 ` meissner at gcc dot gnu.org
  2014-04-04 13:40 ` wschmidt at gcc dot gnu.org
  7 siblings, 0 replies; 8+ messages in thread
From: meissner at gcc dot gnu.org @ 2013-10-03  0:08 UTC (permalink / raw)
  To: gcc-bugs

http://gcc.gnu.org/bugzilla/show_bug.cgi?id=58587

--- Comment #5 from Michael Meissner <meissner at gcc dot gnu.org> ---
Author: meissner
Date: Thu Oct  3 00:08:12 2013
New Revision: 203143

URL: http://gcc.gnu.org/viewcvs?rev=203143&root=gcc&view=rev
Log:
2013-10-02  Michael Meissner  <meissner@linux.vnet.ibm.com>

    Backport from mainline
    2013-10-02  Michael Meissner  <meissner@linux.vnet.ibm.com>

    PR target/58587
    * config/rs6000/rs6000-cpus.def (ISA_2_6_MASKS_SERVER): Turn off
    setting -mvsx-timode by default until the underlying problem is
    fixed.
    (RS6000_CPU, power7 defaults): Likewise.


Modified:
    branches/ibm/gcc-4_8-branch/gcc/ChangeLog.ibm
    branches/ibm/gcc-4_8-branch/gcc/config/rs6000/rs6000-cpus.def


^ permalink raw reply	[flat|nested] 8+ messages in thread

* [Bug target/58587] Bootstrap error with ada with -mcpu=power7
       [not found] <bug-58587-4@http.gcc.gnu.org/bugzilla/>
                   ` (5 preceding siblings ...)
  2013-10-03  0:08 ` meissner at gcc dot gnu.org
@ 2013-10-11 20:46 ` meissner at gcc dot gnu.org
  2014-04-04 13:40 ` wschmidt at gcc dot gnu.org
  7 siblings, 0 replies; 8+ messages in thread
From: meissner at gcc dot gnu.org @ 2013-10-11 20:46 UTC (permalink / raw)
  To: gcc-bugs

http://gcc.gnu.org/bugzilla/show_bug.cgi?id=58587

--- Comment #6 from Michael Meissner <meissner at gcc dot gnu.org> ---
This patch caused a regression in power8 support.  See
http://gcc.gnu.org/bugzilla/show_bug.cgi?id=58673.


^ permalink raw reply	[flat|nested] 8+ messages in thread

* [Bug target/58587] Bootstrap error with ada with -mcpu=power7
       [not found] <bug-58587-4@http.gcc.gnu.org/bugzilla/>
                   ` (6 preceding siblings ...)
  2013-10-11 20:46 ` meissner at gcc dot gnu.org
@ 2014-04-04 13:40 ` wschmidt at gcc dot gnu.org
  7 siblings, 0 replies; 8+ messages in thread
From: wschmidt at gcc dot gnu.org @ 2014-04-04 13:40 UTC (permalink / raw)
  To: gcc-bugs

http://gcc.gnu.org/bugzilla/show_bug.cgi?id=58587

--- Comment #7 from Bill Schmidt <wschmidt at gcc dot gnu.org> ---
Author: wschmidt
Date: Fri Apr  4 13:39:27 2014
New Revision: 209087

URL: http://gcc.gnu.org/viewcvs?rev=209087&root=gcc&view=rev
Log:
[gcc]

2014-04-04  Bill Schmidt  <wschmidt@linux.vnet.ibm.com>

    Apply mainline
    2013-11-23  Alan Modra  <amodra@gmail.com>
    * config/rs6000/vsx.md (fusion peepholes): Disable when !TARGET_VSX.

    Backport from mainline
    2013-11-12  Michael Meissner  <meissner@linux.vnet.ibm.com>

    PR target/59054
    * config/rs6000/rs6000.md (movdi_internal32): Eliminate
    constraints that would allow DImode into the traditional Altivec
    registers, but cause undesirable code generation when loading 0 as
    a constant.
    (movdi_internal64): Likewise.
    (cmp<mode>_fpr): Do not use %x for CR register output.
    (extendsfdf2_fpr): Fix constraints when -mallow-upper-df and
    -mallow-upper-sf debug switches are used.

    Backport from mainline
    2013-10-17  Michael Meissner  <meissner@linux.vnet.ibm.com>

    * config/rs6000/rs6000.c (enum rs6000_reload_reg_type): Add new
    fields to the reg_addr array that describes the valid addressing
    mode for any register, general purpose registers, floating point
    registers, and Altivec registers.
    (FIRST_RELOAD_REG_CLASS): Likewise.
    (LAST_RELOAD_REG_CLASS): Likewise.
    (struct reload_reg_map_type): Likewise.
    (reload_reg_map_type): Likewise.
    (RELOAD_REG_VALID): Likewise.
    (RELOAD_REG_MULTIPLE): Likewise.
    (RELOAD_REG_INDEXED): Likewise.
    (RELOAD_REG_OFFSET): Likewise.
    (RELOAD_REG_PRE_INCDEC): Likewise.
    (RELOAD_REG_PRE_MODIFY): Likewise.
    (reg_addr): Likewise.
    (mode_supports_pre_incdec_p): New helper functions to say whether
    a given mode supports PRE_INC, PRE_DEC, and PRE_MODIFY.
    (mode_supports_pre_modify_p): Likewise.
    (rs6000_debug_vector_unit): Rearrange the -mdebug=reg output to
    print the valid address mode bits for each mode.
    (rs6000_debug_print_mode): Likewise.
    (rs6000_debug_reg_global): Likewise.
    (rs6000_setup_reg_addr_masks): New function to set up the address
    mask bits for each type.
    (rs6000_init_hard_regno_mode_ok): Use memset to clear arrays.
    Call rs6000_setup_reg_addr_masks to set up the address mask bits.
    (rs6000_legitimate_address_p): Use mode_supports_pre_incdec_p and
    mode_supports_pre_modify_p to determine if PRE_INC, PRE_DEC, and
    PRE_MODIFY are supported.
    (rs6000_output_move_128bit): Change to use {src,dest}_vmx_p for altivec
    registers, instead of {src,dest}_av_p.
    (rs6000_print_options_internal): Tweak the debug output slightly.

    Backport from mainline
    2013-10-03  Michael Meissner  <meissner@linux.vnet.ibm.com>

    * config/rs6000/rs6000-builtin.def (XSRDPIM): Use floatdf2,
    ceildf2, btruncdf2, instead of vsx_* name.

    * config/rs6000/vsx.md (vsx_add<mode>3): Change arithmetic
    iterators to only do V2DF and V4SF here.  Move the DF code to
    rs6000.md where it is combined with SF mode.  Replace <VSv> with
    just 'v' since only vector operations are handled with these insns
    after moving the DF support to rs6000.md.
    (vsx_sub<mode>3): Likewise.
    (vsx_mul<mode>3): Likewise.
    (vsx_div<mode>3): Likewise.
    (vsx_fre<mode>2): Likewise.
    (vsx_neg<mode>2): Likewise.
    (vsx_abs<mode>2): Likewise.
    (vsx_nabs<mode>2): Likewise.
    (vsx_smax<mode>3): Likewise.
    (vsx_smin<mode>3): Likewise.
    (vsx_sqrt<mode>2): Likewise.
    (vsx_rsqrte<mode>2): Likewise.
    (vsx_fms<mode>4): Likewise.
    (vsx_nfma<mode>4): Likewise.
    (vsx_copysign<mode>3): Likewise.
    (vsx_btrunc<mode>2): Likewise.
    (vsx_floor<mode>2): Likewise.
    (vsx_ceil<mode>2): Likewise.
    (vsx_smaxsf3): Delete scalar ops that were moved to rs6000.md.
    (vsx_sminsf3): Likewise.
    (vsx_fmadf4): Likewise.
    (vsx_fmsdf4): Likewise.
    (vsx_nfmadf4): Likewise.
    (vsx_nfmsdf4): Likewise.
    (vsx_cmpdf_internal1): Likewise.

    * config/rs6000/rs6000.h (TARGET_SF_SPE): Define macros to make it
    simpler to select whether a target has SPE or traditional floating
    point support in iterators.
    (TARGET_DF_SPE): Likewise.
    (TARGET_SF_FPR): Likewise.
    (TARGET_DF_FPR): Likewise.
    (TARGET_SF_INSN): Macros to say whether floating point support
    exists for a given operation for expanders.
    (TARGET_DF_INSN): Likewise.

    * config/rs6000/rs6000.c (Ftrad): New mode attributes to allow
    combining of SF/DF mode operations, using both traditional and VSX
    registers.
    (Fvsx): Likewise.
    (Ff): Likewise.
    (Fv): Likewise.
    (Fs): Likewise.
    (Ffre): Likewise.
    (FFRE): Likewise.
    (abs<mode>2): Combine SF/DF modes using traditional floating point
    instructions.  Add support for using the upper DF registers with
    VSX support, and SF registers with power8-vector support.  Update
    expanders for operations supported by both the SPE and traditional
    floating point units.
    (abs<mode>2_fpr): Likewise.
    (nabs<mode>2): Likewise.
    (nabs<mode>2_fpr): Likewise.
    (neg<mode>2): Likewise.
    (neg<mode>2_fpr): Likewise.
    (add<mode>3): Likewise.
    (add<mode>3_fpr): Likewise.
    (sub<mode>3): Likewise.
    (sub<mode>3_fpr): Likewise.
    (mul<mode>3): Likewise.
    (mul<mode>3_fpr): Likewise.
    (div<mode>3): Likewise.
    (div<mode>3_fpr): Likewise.
    (sqrt<mode>3): Likewise.
    (sqrt<mode>3_fpr): Likewise.
    (fre<Fs>): Likewise.
    (rsqrt<mode>2): Likewise.
    (cmp<mode>_fpr): Likewise.
    (smax<mode>3): Likewise.
    (smin<mode>3): Likewise.
    (smax<mode>3_vsx): Likewise.
    (smin<mode>3_vsx): Likewise.
    (negsf2): Delete SF operations that are merged with DF.
    (abssf2): Likewise.
    (addsf3): Likewise.
    (subsf3): Likewise.
    (mulsf3): Likewise.
    (divsf3): Likewise.
    (fres): Likewise.
    (fmasf4_fpr): Likewise.
    (fmssf4_fpr): Likewise.
    (nfmasf4_fpr): Likewise.
    (nfmssf4_fpr): Likewise.
    (sqrtsf2): Likewise.
    (rsqrtsf_internal1): Likewise.
    (smaxsf3): Likewise.
    (sminsf3): Likewise.
    (cmpsf_internal1): Likewise.
    (copysign<mode>3_fcpsgn): Add VSX/power8-vector support.
    (negdf2): Delete DF operations that are merged with SF.
    (absdf2): Likewise.
    (nabsdf2): Likewise.
    (adddf3): Likewise.
    (subdf3): Likewise.
    (muldf3): Likewise.
    (divdf3): Likewise.
    (fred): Likewise.
    (rsqrtdf_internal1): Likewise.
    (fmadf4_fpr): Likewise.
    (fmsdf4_fpr): Likewise.
    (nfmadf4_fpr): Likewise.
    (nfmsdf4_fpr): Likewise.
    (sqrtdf2): Likewise.
    (smaxdf3): Likewise.
    (smindf3): Likewise.
    (cmpdf_internal1): Likewise.
    (lrint<mode>di2): Use TARGET_<MODE>_FPR macro.
    (btrunc<mode>2): Delete separate expander, and combine with the
    insn and add VSX instruction support.  Use TARGET_<MODE>_FPR.
    (btrunc<mode>2_fpr): Likewise.
    (ceil<mode>2): Likewise.
    (ceil<mode>2_fpr): Likewise.
    (floor<mode>2): Likewise.
    (floor<mode>2_fpr): Likewise.
    (fma<mode>4_fpr): Combine SF and DF fused multiply/add support.
    Add support for using the upper registers with VSX and
    power8-vector.  Move insns to be closer to the define_expands. On
    VSX systems, prefer the traditional form of FMA over the VSX
    version, since the traditional form allows the target not to
    overlap with the inputs.
    (fms<mode>4_fpr): Likewise.
    (nfma<mode>4_fpr): Likewise.
    (nfms<mode>4_fpr): Likewise.

    Backport from mainline
    2013-09-27  Michael Meissner  <meissner@linux.vnet.ibm.com>

    * config/rs6000/rs6000.c (rs6000_hard_regno_mode_ok): Allow
    DFmode, DImode, and SFmode in the upper VSX registers based on the
    -mupper-regs-{df,sf} flags.  Fix wu constraint to be ALTIVEC_REGS
    if -mpower8-vector.  Combine -mvsx-timode handling with the rest
    of the VSX register handling.

    * config/rs6000/rs6000.md (f32_lv): Use %x0 for VSX regsters.
    (f32_sv): Likewise.
    (zero_extendsidi2_lfiwzx): Add support for loading into the
    Altivec registers with -mpower8-vector.  Use wu/wv constraints to
    only do VSX memory options on Altivec registers.
    (extendsidi2_lfiwax): Likewise.
    (extendsfdf2_fpr): Likewise.
    (mov<mode>_hardfloat, SF/SD modes): Likewise.
    (mov<mode>_hardfloat32, DF/DD modes): Likewise.
    (mov<mode>_hardfloat64, DF/DD modes): Likewise.
    (movdi_internal64): Likewise.

    Backport from mainline
    2013-09-23  Michael Meissner  <meissner@linux.vnet.ibm.com>

    * config/rs6000/rs6000.c (rs6000_vector_reload): Delete, combine
    reload helper function arrays into a single array reg_addr.
    (reload_fpr_gpr): Likewise.
    (reload_gpr_vsx): Likewise.
    (reload_vsx_gpr): Likewise.
    (struct rs6000_reg_addr): Likewise.
    (reg_addr): Likewise.
    (rs6000_debug_reg_global): Change rs6000_vector_reload,
    reload_fpr_gpr, reload_gpr_vsx, reload_vsx_gpr uses to reg_addr.
    (rs6000_init_hard_regno_mode_ok): Likewise.
    (rs6000_secondary_reload_direct_move): Likewise.
    (rs6000_secondary_reload): Likewise.

    * config/rs6000/rs6000.h (enum r6000_reg_class_enum): Add new
    constraints: wu, ww, and wy.  Repurpose wv constraint added during
    power8 changes.  Put wg constraint in alphabetical order.

    * config/rs6000/rs6000.opt (-mvsx-scalar-float): New debug switch
    for future work to add ISA 2.07 VSX single precision support.
    (-mvsx-scalar-double): Change default from -1 to 1, update
    documentation comment.
    (-mvsx-scalar-memory): Rename debug switch to -mupper-regs-df.
    (-mupper-regs-df): New debug switch to control whether DF values
    can go in the traditional Altivec registers.
    (-mupper-regs-sf): New debug switch to control whether SF values
    can go in the traditional Altivec registers.

    * config/rs6000/rs6000.c (rs6000_debug_reg_global): Print wu, ww,
    and wy constraints.
    (rs6000_init_hard_regno_mode_ok): Use ssize_t instead of int for
    loop variables.  Rename -mvsx-scalar-memory to -mupper-regs-df.
    Add new constraints, wu/ww/wy.  Repurpose wv constraint.
    (rs6000_debug_legitimate_address_p): Print if we are running
    before, during, or after reload.
    (rs6000_secondary_reload): Add a comment.
    (rs6000_opt_masks): Add -mupper-regs-df, -mupper-regs-sf.

    * config/rs6000/constraints.md (wa constraint): Sort w<x>
    constraints.  Update documentation string.
    (wd constraint): Likewise.
    (wf constraint): Likewise.
    (wg constraint): Likewise.
    (wn constraint): Likewise.
    (ws constraint): Likewise.
    (wt constraint): Likewise.
    (wx constraint): Likewise.
    (wz constraint): Likewise.
    (wu constraint): New constraint for ISA 2.07 SFmode scalar
    instructions.
    (ww constraint): Likewise.
    (wy constraint): Likewise.
    (wv constraint): Repurpose ISA 2.07 constraint that did not use in
    the previous submissions.
    * doc/md.texi (PowerPC and IBM RS6000): Likewise.

    Backport from mainline
    2013-10-17  Michael Meissner  <meissner@linux.vnet.ibm.com>

    PR target/58673
    * config/rs6000/rs6000.c (rs6000_legitimate_address_p): Only
    restrict TImode addresses to single indirect registers if both
    -mquad-memory and -mvsx-timode are used.
    (rs6000_output_move_128bit): Use quad_load_store_p to determine if
    we should emit load/store quad.  Remove using %y for quad memory
    addresses.

    * config/rs6000/rs6000.md (mov<mode>_ppc64, TI/PTImode): Add
    constraints to allow load/store quad on machines where TImode is
    not allowed in VSX registers.  Use 'n' instead of 'F' constraint
    for TImode to load integer constants.

    Backport from mainline
    2013-10-02  Michael Meissner  <meissner@linux.vnet.ibm.com>

    PR target/58587
    * config/rs6000/rs6000-cpus.def (ISA_2_6_MASKS_SERVER): Turn off
    setting -mvsx-timode by default until the underlying problem is
    fixed.
    (RS6000_CPU, power7 defaults): Likewise.

    Backport from trunk
    2013-08-16  Michael Meissner  <meissner@linux.vnet.ibm.com>

    PR target/58160
    * config/rs6000/predicates.md (fusion_gpr_mem_load): Allow the
    memory rtx to contain ZERO_EXTEND and SIGN_EXTEND.

    * config/rs6000/rs6000-protos.h (fusion_gpr_load_p): Pass operands
    array instead of each individual operand as a separate argument.
    (emit_fusion_gpr_load): Likewise.
    (expand_fusion_gpr_load): Add new function declaration.

    * config/rs6000/rs6000.c (fusion_gpr_load_p): Change the calling
    signature to have the operands passed as an array, instead of as
    separate arguments.  Allow ZERO_EXTEND to be in the memory
    address, and also SIGN_EXTEND if -mpower8-fusion-sign.  Do not
    depend on the register live/dead flags when peepholes are run.
    (expand_fusion_gpr_load): New function to be called from the
    peephole2 pass, to change the register that addis sets to be the
    target register.
    (emit_fusion_gpr_load): Change the calling signature to have the
    operands passed as an array, instead of as separate arguments.
    Allow ZERO_EXTEND to be in the memory address, and also
    SIGN_EXTEND if -mpower8-fusion-sign.

    * config/rs6000/rs6000.md (UNSPEC_FUSION_GPR): Delete unused
    unspec enumeration.
    (power8 fusion peephole/peephole2): Rework the fusion peepholes to
    adjust the register addis loads up in the peephole2 pass.  Do not
    depend on the register live/dead state when the peephole pass is
    done.

    Backport from trunk
    2013-07-23  Michael Meissner  <meissner@linux.vnet.ibm.com>

    * config/rs6000/vector.md (xor<mode>3): Move 128-bit boolean
    expanders to rs6000.md.
    (ior<mode>3): Likewise.
    (and<mode>3): Likewise.
    (one_cmpl<mode>2): Likewise.
    (nor<mode>3): Likewise.
    (andc<mode>3): Likewise.
    (eqv<mode>3): Likewise.
    (nand<mode>3): Likewise.
    (orc<mode>3): Likewise.

    * config/rs6000/rs6000-protos.h (rs6000_split_logical): New
    declaration.

    * config/rs6000/rs6000.c (rs6000_split_logical_inner): Add support
    to split multi-word logical operations.
    (rs6000_split_logical_di): Likewise.
    (rs6000_split_logical): Likewise.

    * config/rs6000/vsx.md (VSX_L2): Delete, no longer used.
    (vsx_and<mode>3_32bit): Move 128-bit logical insns to rs6000.md,
    and allow TImode operations in 32-bit.
    (vsx_and<mode>3_64bit): Likewise.
    (vsx_ior<mode>3_32bit): Likewise.
    (vsx_ior<mode>3_64bit): Likewise.
    (vsx_xor<mode>3_32bit): Likewise.
    (vsx_xor<mode>3_64bit): Likewise.
    (vsx_one_cmpl<mode>2_32bit): Likewise.
    (vsx_one_cmpl<mode>2_64bit): Likewise.
    (vsx_nor<mode>3_32bit): Likewise.
    (vsx_nor<mode>3_64bit): Likewise.
    (vsx_andc<mode>3_32bit): Likewise.
    (vsx_andc<mode>3_64bit): Likewise.
    (vsx_eqv<mode>3_32bit): Likewise.
    (vsx_eqv<mode>3_64bit): Likewise.
    (vsx_nand<mode>3_32bit): Likewise.
    (vsx_nand<mode>3_64bit): Likewise.
    (vsx_orc<mode>3_32bit): Likewise.
    (vsx_orc<mode>3_64bit): Likewise.

    * config/rs6000/rs6000.h (VLOGICAL_REGNO_P): Always allow vector
    logical types in GPRs.

    * config/rs6000/altivec.md (altivec_and<mode>3): Move 128-bit
    logical insns to rs6000.md, and allow TImode operations in
    32-bit.
    (altivec_ior<mode>3): Likewise.
    (altivec_xor<mode>3): Likewise.
    (altivec_one_cmpl<mode>2): Likewise.
    (altivec_nor<mode>3): Likewise.
    (altivec_andc<mode>3): Likewise.

    * config/rs6000/rs6000.md (BOOL_128): New mode iterators and mode
    attributes for moving the 128-bit logical operations into
    rs6000.md.
    (BOOL_REGS_OUTPUT): Likewise.
    (BOOL_REGS_OP1): Likewise.
    (BOOL_REGS_OP2): Likewise.
    (BOOL_REGS_UNARY): Likewise.
    (BOOL_REGS_AND_CR0): Likewise.
    (one_cmpl<mode>2): Add support for DI logical operations on
    32-bit, splitting the operations to 32-bit.
    (anddi3): Likewise.
    (iordi3): Likewise.
    (xordi3): Likewise.
    (and<mode>3, 128-bit types): Rewrite 2013-06-06 logical operator
    changes to combine the 32/64-bit code, allow logical operations on
    TI mode in 32-bit, and to use similar match_operator patterns like
    scalar mode uses.  Combine the Altivec and VSX code for logical
    operations, and move it here.
    (ior<mode>3, 128-bit types): Likewise.
    (xor<mode>3, 128-bit types): Likewise.
    (one_cmpl<mode>3, 128-bit types): Likewise.
    (nor<mode>3, 128-bit types): Likewise.
    (andc<mode>3, 128-bit types): Likewise.
    (eqv<mode>3, 128-bit types): Likewise.
    (nand<mode>3, 128-bit types): Likewise.
    (orc<mode>3, 128-bit types): Likewise.
    (and<mode>3_internal): Likewise.
    (bool<mode>3_internal): Likewise.
    (boolc<mode>3_internal1): Likewise.
    (boolc<mode>3_internal2): Likewise.
    (boolcc<mode>3_internal1): Likewise.
    (boolcc<mode>3_internal2): Likewise.
    (eqv<mode>3_internal1): Likewise.
    (eqv<mode>3_internal2): Likewise.
    (one_cmpl1<mode>3_internal): Likewise.

    Back port from mainline:
    2013-06-06  Michael Meissner  <meissner@linux.vnet.ibm.com>
            Pat Haugen <pthaugen@us.ibm.com>
            Peter Bergner <bergner@vnet.ibm.com>

    * lib/target-supports.exp (check_p8vector_hw_available) Add power8
    support.
    (check_effective_target_powerpc_p8vector_ok): Likewise.
    (is-effective-target): Likewise.
    (check_vect_support_and_set_flags): Likewise.

    Backport from mainline
    2013-07-31  Michael Meissner  <meissner@linux.vnet.ibm.com>

    * config/rs6000/predicates.md (fusion_gpr_addis): New predicates
    to support power8 load fusion.
    (fusion_gpr_mem_load): Likewise.

    * config/rs6000/rs6000-modes.def (PTImode): Update a comment.

    * config/rs6000/rs6000-protos.h (fusion_gpr_load_p): New
    declarations for power8 load fusion.
    (emit_fusion_gpr_load): Likewise.

    * config/rs6000/rs6000.c (rs6000_option_override_internal): If
    tuning for power8, turn on fusion mode by default.  Turn on sign
    extending fusion mode if normal fusion mode is on, and we are at
    -O2 or -O3.
    (fusion_gpr_load_p): New function, return true if we can fuse an
    addis instruction with a dependent load to a GPR.
    (emit_fusion_gpr_load): Emit the instructions for power8 load
    fusion to GPRs.

    * config/rs6000/vsx.md (VSX_M2): New iterator for fusion
    peepholes.
    (VSX load fusion peepholes): New peepholes to fuse together an
    addi instruction with a VSX load instruction.

    * config/rs6000/rs6000.md (GPR load fusion peepholes): New
    peepholes to fuse an addis instruction with a load to a GPR base
    register.  If we are supporting sign extending fusions, convert
    sign extending loads to zero extending loads and add an explicit
    sign extension.

    Backport from mainline
    2013-07-18  Pat Haugen <pthaugen@us.ibm.com>

    * config/rs6000/rs6000.c (rs6000_option_override_internal): Adjust flag
    interaction for new Power8 flags and VSX.

    Back port from the trunk
    2013-06-28  Michael Meissner  <meissner@linux.vnet.ibm.com>

    PR target/57744
    * config/rs6000/rs6000.h (MODES_TIEABLE_P): Do not allow PTImode
    to tie with any other modes.  Eliminate Altivec vector mode tests,
    since these are a subset of ALTIVEC or VSX vector modes.  Simplify
    code, to return 0 if testing MODE2 for a condition, if we've
    already tested MODE1 for the same condition.

    Backport from mainline
    2013-06-28  Pat Haugen <pthaugen@us.ibm.com>

    * config/rs6000/rs6000.md (define_insn ""): Fix insn type.

    Back port from the trunk
    2013-06-26  Michael Meissner  <meissner@linux.vnet.ibm.com>
            Pat Haugen <pthaugen@us.ibm.com>
            Peter Bergner <bergner@vnet.ibm.com>

    * config/rs6000/power8.md: New.
    * config/rs6000/rs6000-cpus.def (RS6000_CPU table): Adjust processor
    setting for power8 entry.
    * config/rs6000/t-rs6000 (MD_INCLUDES): Add power8.md.
    * config/rs6000/rs6000.c (is_microcoded_insn, is_cracked_insn): Adjust
    test for Power4/Power5 only.
    (insn_must_be_first_in_group, insn_must_be_last_in_group): Add Power8
    support.
    (force_new_group): Adjust comment.
    * config/rs6000/rs6000.md: Include power8.md.

    Back port from the trunk
    2013-06-14  Michael Meissner  <meissner@linux.vnet.ibm.com>

    PR target/57615
    * config/rs6000/rs6000.md (mov<mode>_ppc64): Call
    rs6000_output_move_128bit to handle emitting quad memory
    operations.  Set attribute length to 8 bytes.

    Back port from the trunk
    2013-06-13  Michael Meissner  <meissner@linux.vnet.ibm.com>

    * config/rs6000/rs6000.c (rs6000_option_override_internal): Move
    test for clearing quad memory on 32-bit later.

    Back port from the trunk

    2013-06-12  Michael Meissner  <meissner@linux.vnet.ibm.com>
            Pat Haugen <pthaugen@us.ibm.com>
            Peter Bergner <bergner@vnet.ibm.com>

    * config/rs6000/rs6000.c (emit_load_locked): Add support for
    power8 byte, half-word, and quad-word atomic instructions.
    (emit_store_conditional): Likewise.
    (rs6000_expand_atomic_compare_and_swap): Likewise.
    (rs6000_expand_atomic_op): Likewise.

    * config/rs6000/sync.md (larx): Add new modes for power8.
    (stcx): Likewise.
    (AINT): New mode iterator to include TImode as well as normal
    integer modes on power8.
    (fetchop_pred): Use int_reg_operand instead of gpc_reg_operand so
    that VSX registers are not considered.  Use AINT mode iterator
    instead of INT1 to allow inclusion of quad word atomic operations
    on power8.
    (load_locked<mode>): Likewise.
    (store_conditional<mode>): Likewise.
    (atomic_compare_and_swap<mode>): Likewise.
    (atomic_exchange<mode>): Likewise.
    (atomic_nand<mode>): Likewise.
    (atomic_fetch_<fetchop_name><mode>): Likewise.
    (atomic_nand_fetch<mode>): Likewise.
    (mem_thread_fence): Use gen_loadsync_<mode> instead of enumerating
    each type.
    (ATOMIC): On power8, add QImode, HImode modes.
    (load_locked<QHI:mode>_si): Varients of load_locked for QI/HI
    modes that promote to SImode.
    (load_lockedti): Convert TImode arguments to PTImode, so that we
    get a guaranteed even/odd register pair.
    (load_lockedpti): Likewise.
    (store_conditionalti): Likewise.
    (store_conditionalpti): Likewise.

    * config/rs6000/rs6000.md (QHI): New mode iterator for power8
    atomic load/store instructions.
    (HSI): Likewise.

    Back port from the trunk

    2013-06-10  Michael Meissner  <meissner@linux.vnet.ibm.com>
            Pat Haugen <pthaugen@us.ibm.com>
            Peter Bergner <bergner@vnet.ibm.com>

    * config/rs6000/vector.md (GPR move splitter): Do not split moves
    of vectors in GPRS if they are direct moves or quad word load or
    store moves.

    * config/rs6000/rs6000-protos.h (rs6000_output_move_128bit): Add
    declaration.
    (direct_move_p): Likewise.
    (quad_load_store_p): Likewise.

    * config/rs6000/rs6000.c (enum rs6000_reg_type): Simplify register
    classes into bins based on the physical register type.
    (reg_class_to_reg_type): Likewise.
    (IS_STD_REG_TYPE): Likewise.
    (IS_FP_VECT_REG_TYPE): Likewise.
    (reload_fpr_gpr): Arrays to determine what insn to use if we can
    use direct move instructions.
    (reload_gpr_vsx): Likewise.
    (reload_vsx_gpr): Likewise.
    (rs6000_init_hard_regno_mode_ok): Precalculate the register type
    information that is a simplification of register classes.  Also
    precalculate direct move reload helpers.
    (direct_move_p): New function to return true if the operation can
    be done as a direct move instruciton.
    (quad_load_store_p): New function to return true if the operation
    is a quad memory operation.
    (rs6000_legitimize_address): If quad memory, only allow register
    indirect for TImode addresses.
    (rs6000_legitimate_address_p): Likewise.
    (enum reload_reg_type): Delete, replace with rs6000_reg_type.
    (rs6000_reload_register_type): Likewise.
    (register_to_reg_type): Return register type.
    (rs6000_secondary_reload_simple_move): New helper function for
    secondary reload and secondary memory needed to identify anything
    that is a simple move, and does not need reloading.
    (rs6000_secondary_reload_direct_move): New helper function for
    secondary reload to identify cases that can be done with several
    instructions via the direct move instructions.
    (rs6000_secondary_reload_move): New helper function for secondary
    reload to identify moves between register types that can be done.
    (rs6000_secondary_reload): Add support for quad memory operations
    and for direct move.
    (rs6000_secondary_memory_needed): Likewise.
    (rs6000_debug_secondary_memory_needed): Change argument names.
    (rs6000_output_move_128bit): New function to return the move to
    use for 128-bit moves, including knowing about the various
    limitations of quad memory operations.

    * config/rs6000/vsx.md (vsx_mov<mode>): Add support for quad
    memory operations.  call rs6000_output_move_128bit for the actual
    instruciton(s) to generate.
    (vsx_movti_64bit): Likewise.

    * config/rs6000/rs6000.md (UNSPEC_P8V_FMRGOW): New unspec values.
    (UNSPEC_P8V_MTVSRWZ): Likewise.
    (UNSPEC_P8V_RELOAD_FROM_GPR): Likewise.
    (UNSPEC_P8V_MTVSRD): Likewise.
    (UNSPEC_P8V_XXPERMDI): Likewise.
    (UNSPEC_P8V_RELOAD_FROM_VSX): Likewise.
    (UNSPEC_FUSION_GPR): Likewise.
    (FMOVE128_GPR): New iterator for direct move.
    (f32_lv): New mode attribute for load/store of SFmode/SDmode
    values.
    (f32_sv): Likewise.
    (f32_dm): Likewise.
    (zero_extend<mode>di2_internal1): Add support for power8 32-bit
    loads and direct move instructions.
    (zero_extendsidi2_lfiwzx): Likewise.
    (extendsidi2_lfiwax): Likewise.
    (extendsidi2_nocell): Likewise.
    (floatsi<mode>2_lfiwax): Likewise.
    (lfiwax): Likewise.
    (floatunssi<mode>2_lfiwzx): Likewise.
    (lfiwzx): Likewise.
    (fix_trunc<mode>_stfiwx): Likewise.
    (fixuns_trunc<mode>_stfiwx): Likewise.
    (mov<mode>_hardfloat, 32-bit floating point): Likewise.
    (mov<move>_hardfloat64, 64-bit floating point): Likewise.
    (parity<mode>2_cmpb): Set length/type attr.
    (unnamed shift right patterns, mov<mode>_internal2): Change type attr
    for 'mr.' to fast_compare.
    (bpermd_<mode>): Change type attr to popcnt.
    (p8_fmrgow_<mode>): New insns for power8 direct move support.
    (p8_mtvsrwz_1): Likewise.
    (p8_mtvsrwz_2): Likewise.
    (reload_fpr_from_gpr<mode>): Likewise.
    (p8_mtvsrd_1): Likewise.
    (p8_mtvsrd_2): Likewise.
    (p8_xxpermdi_<mode>): Likewise.
    (reload_vsx_from_gpr<mode>): Likewise.
    (reload_vsx_from_gprsf): Likewise.
    (p8_mfvsrd_3_<mode>): LIkewise.
    (reload_gpr_from_vsx<mode>): Likewise.
    (reload_gpr_from_vsxsf): Likewise.
    (p8_mfvsrd_4_disf): Likewise.
    (multi-word GPR splits): Do not split direct moves or quad memory
    operations.

    Backport from the trunk

    2013-06-06  Michael Meissner  <meissner@linux.vnet.ibm.com>
            Pat Haugen <pthaugen@us.ibm.com>
            Peter Bergner <bergner@vnet.ibm.com>

    * doc/extend.texi (PowerPC AltiVec/VSX Built-in Functions):
    Document new power8 builtins.

    * config/rs6000/vector.md (and<mode>3): Add a clobber/scratch of a
    condition code register, to allow 128-bit logical operations to be
    done in the VSX or GPR registers.
    (nor<mode>3): Use the canonical form for nor.
    (eqv<mode>3): Add expanders for power8 xxleqv, xxlnand, xxlorc,
    vclz*, and vpopcnt* vector instructions.
    (nand<mode>3): Likewise.
    (orc<mode>3): Likewise.
    (clz<mode>2): LIkewise.
    (popcount<mode>2): Likewise.

    * config/rs6000/predicates.md (int_reg_operand): Rework tests so
    that only the GPRs are recognized.

    * config/rs6000/rs6000-c.c (altivec_overloaded_builtins): Add
    support for new power8 builtins.

    * config/rs6000/rs6000-builtin.def (xscvspdpn): Add new power8
    builtin functions.
    (xscvdpspn): Likewise.
    (vclz): Likewise.
    (vclzb): Likewise.
    (vclzh): Likewise.
    (vclzw): Likewise.
    (vclzd): Likewise.
    (vpopcnt): Likewise.
    (vpopcntb): Likewise.
    (vpopcnth): Likewise.
    (vpopcntw): Likewise.
    (vpopcntd): Likewise.
    (vgbbd): Likewise.
    (vmrgew): Likewise.
    (vmrgow): Likewise.
    (eqv): Likewise.
    (eqv_v16qi3): Likewise.
    (eqv_v8hi3): Likewise.
    (eqv_v4si3): Likewise.
    (eqv_v2di3): Likewise.
    (eqv_v4sf3): Likewise.
    (eqv_v2df3): Likewise.
    (nand): Likewise.
    (nand_v16qi3): Likewise.
    (nand_v8hi3): Likewise.
    (nand_v4si3): Likewise.
    (nand_v2di3): Likewise.
    (nand_v4sf3): Likewise.
    (nand_v2df3): Likewise.
    (orc): Likewise.
    (orc_v16qi3): Likewise.
    (orc_v8hi3): Likewise.
    (orc_v4si3): Likewise.
    (orc_v2di3): Likewise.
    (orc_v4sf3): Likewise.
    (orc_v2df3): Likewise.

    * config/rs6000/rs6000.c (rs6000_option_override_internal): Only
    allow power8 quad mode in 64-bit.
    (rs6000_builtin_vectorized_function): Add support to vectorize
    ISA 2.07 count leading zeros, population count builtins.
    (rs6000_expand_vector_init): On ISA 2.07 use xscvdpspn to form
    V4SF vectors instead of xscvdpsp to avoid IEEE related traps.
    (builtin_function_type): Add vgbbd builtin function which takes an
    unsigned argument.
    (altivec_expand_vec_perm_const): Add support for new power8 merge
    instructions.

    * config/rs6000/vsx.md (VSX_L2): New iterator for 128-bit types,
    that does not include TImdoe for use with 32-bit.
    (UNSPEC_VSX_CVSPDPN): Support for power8 xscvdpspn and xscvspdpn
    instructions.
    (UNSPEC_VSX_CVDPSPN): Likewise.
    (vsx_xscvdpspn): Likewise.
    (vsx_xscvspdpn): Likewise.
    (vsx_xscvdpspn_scalar): Likewise.
    (vsx_xscvspdpn_directmove): Likewise.
    (vsx_and<mode>3): Split logical operations into 32-bit and
    64-bit. Add support to do logical operations on TImode as well as
    VSX vector types.  Allow logical operations to be done in either
    VSX registers or in general purpose registers in 64-bit mode.  Add
    splitters if GPRs were used. For AND, add clobber of CCmode to
    allow use of ANDI on GPRs.  Rewrite nor to use the canonical RTL
    encoding.
    (vsx_and<mode>3_32bit): Likewise.
    (vsx_and<mode>3_64bit): Likewise.
    (vsx_ior<mode>3): Likewise.
    (vsx_ior<mode>3_32bit): Likewise.
    (vsx_ior<mode>3_64bit): Likewise.
    (vsx_xor<mode>3): Likewise.
    (vsx_xor<mode>3_32bit): Likewise.
    (vsx_xor<mode>3_64bit): Likewise.
    (vsx_one_cmpl<mode>2): Likewise.
    (vsx_one_cmpl<mode>2_32bit): Likewise.
    (vsx_one_cmpl<mode>2_64bit): Likewise.
    (vsx_nor<mode>3): Likewise.
    (vsx_nor<mode>3_32bit): Likewise.
    (vsx_nor<mode>3_64bit): Likewise.
    (vsx_andc<mode>3): Likewise.
    (vsx_andc<mode>3_32bit): Likewise.
    (vsx_andc<mode>3_64bit): Likewise.
    (vsx_eqv<mode>3_32bit): Add support for power8 xxleqv, xxlnand,
    and xxlorc instructions.
    (vsx_eqv<mode>3_64bit): Likewise.
    (vsx_nand<mode>3_32bit): Likewise.
    (vsx_nand<mode>3_64bit): Likewise.
    (vsx_orc<mode>3_32bit): Likewise.
    (vsx_orc<mode>3_64bit): Likewise.

    * config/rs6000/rs6000.h (VLOGICAL_REGNO_P): Update comment.

    * config/rs6000/altivec.md (UNSPEC_VGBBD): Add power8 vgbbd
    instruction.
    (p8_vmrgew): Add power8 vmrgew and vmrgow instructions.
    (p8_vmrgow): Likewise.
    (altivec_and<mode>3): Add clobber of CCmode to allow AND using
    GPRs to be split under VSX.
    (p8v_clz<mode>2): Add power8 count leading zero support.
    (p8v_popcount<mode>2): Add power8 population count support.
    (p8v_vgbbd): Add power8 gather bits by bytes by doubleword
    support.

    * config/rs6000/rs6000.md (eqv<mode>3): Add support for powerp eqv
    instruction.

    * config/rs6000/altivec.h (vec_eqv): Add defines to export power8
    builtin functions.
    (vec_nand): Likewise.
    (vec_vclz): Likewise.
    (vec_vclzb): Likewise.
    (vec_vclzd): Likewise.
    (vec_vclzh): Likewise.
    (vec_vclzw): Likewise.
    (vec_vgbbd): Likewise.
    (vec_vmrgew): Likewise.
    (vec_vmrgow): Likewise.
    (vec_vpopcnt): Likewise.
    (vec_vpopcntb): Likewise.
    (vec_vpopcntd): Likewise.
    (vec_vpopcnth): Likewise.
    (vec_vpopcntw): Likewise.

    Backport from trunk

    2013-05-29  Michael Meissner  <meissner@linux.vnet.ibm.com>
            Pat Haugen <pthaugen@us.ibm.com>
            Peter Bergner <bergner@vnet.ibm.com>

    * config/rs6000/vector.md (VEC_I): Add support for new power8 V2DI
    instructions.
    (VEC_A): Likewise.
    (VEC_C): Likewise.
    (vrotl<mode>3): Likewise.
    (vashl<mode>3): Likewise.
    (vlshr<mode>3): Likewise.
    (vashr<mode>3): Likewise.

    * config/rs6000/rs6000-c.c (altivec_overloaded_builtins): Add
    support for power8 V2DI builtins.

    * config/rs6000/rs6000-builtin.def (abs_v2di): Add support for
    power8 V2DI builtins.
    (vupkhsw): Likewise.
    (vupklsw): Likewise.
    (vaddudm): Likewise.
    (vminsd): Likewise.
    (vmaxsd): Likewise.
    (vminud): Likewise.
    (vmaxud): Likewise.
    (vpkudum): Likewise.
    (vpksdss): Likewise.
    (vpkudus): Likewise.
    (vpksdus): Likewise.
    (vrld): Likewise.
    (vsld): Likewise.
    (vsrd): Likewise.
    (vsrad): Likewise.
    (vsubudm): Likewise.
    (vcmpequd): Likewise.
    (vcmpgtsd): Likewise.
    (vcmpgtud): Likewise.
    (vcmpequd_p): Likewise.
    (vcmpgtsd_p): Likewise.
    (vcmpgtud_p): Likewise.
    (vupkhsw): Likewise.
    (vupklsw): Likewise.
    (vaddudm): Likewise.
    (vmaxsd): Likewise.
    (vmaxud): Likewise.
    (vminsd): Likewise.
    (vminud): Likewise.
    (vpksdss): Likewise.
    (vpksdus): Likewise.
    (vpkudum): Likewise.
    (vpkudus): Likewise.
    (vrld): Likewise.
    (vsld): Likewise.
    (vsrad): Likewise.
    (vsrd): Likewise.
    (vsubudm): Likewise.

    * config/rs6000/rs6000.c (rs6000_init_hard_regno_mode_ok): Add
    support for power8 V2DI instructions.

    * config/rs6000/altivec.md (UNSPEC_VPKUHUM): Add support for
    power8 V2DI instructions.  Combine pack and unpack insns to use an
    iterator for each mode.  Check whether a particular mode supports
    Altivec instructions instead of just checking TARGET_ALTIVEC.
    (UNSPEC_VPKUWUM): Likewise.
    (UNSPEC_VPKSHSS): Likewise.
    (UNSPEC_VPKSWSS): Likewise.
    (UNSPEC_VPKUHUS): Likewise.
    (UNSPEC_VPKSHUS): Likewise.
    (UNSPEC_VPKUWUS): Likewise.
    (UNSPEC_VPKSWUS): Likewise.
    (UNSPEC_VPACK_SIGN_SIGN_SAT): Likewise.
    (UNSPEC_VPACK_SIGN_UNS_SAT): Likewise.
    (UNSPEC_VPACK_UNS_UNS_SAT): Likewise.
    (UNSPEC_VPACK_UNS_UNS_MOD): Likewise.
    (UNSPEC_VUPKHSB): Likewise.
    (UNSPEC_VUNPACK_HI_SIGN): Likewise.
    (UNSPEC_VUNPACK_LO_SIGN): Likewise.
    (UNSPEC_VUPKHSH): Likewise.
    (UNSPEC_VUPKLSB): Likewise.
    (UNSPEC_VUPKLSH): Likewise.
    (VI2): Likewise.
    (VI_char): Likewise.
    (VI_scalar): Likewise.
    (VI_unit): Likewise.
    (VP): Likewise.
    (VP_small): Likewise.
    (VP_small_lc): Likewise.
    (VU_char): Likewise.
    (add<mode>3): Likewise.
    (altivec_vaddcuw): Likewise.
    (altivec_vaddu<VI_char>s): Likewise.
    (altivec_vadds<VI_char>s): Likewise.
    (sub<mode>3): Likewise.
    (altivec_vsubcuw): Likewise.
    (altivec_vsubu<VI_char>s): Likewise.
    (altivec_vsubs<VI_char>s): Likewise.
    (altivec_vavgs<VI_char>): Likewise.
    (altivec_vcmpbfp): Likewise.
    (altivec_eq<mode>): Likewise.
    (altivec_gt<mode>): Likewise.
    (altivec_gtu<mode>): Likewise.
    (umax<mode>3): Likewise.
    (smax<mode>3): Likewise.
    (umin<mode>3): Likewise.
    (smin<mode>3): Likewise.
    (altivec_vpkuhum): Likewise.
    (altivec_vpkuwum): Likewise.
    (altivec_vpkshss): Likewise.
    (altivec_vpkswss): Likewise.
    (altivec_vpkuhus): Likewise.
    (altivec_vpkshus): Likewise.
    (altivec_vpkuwus): Likewise.
    (altivec_vpkswus): Likewise.
    (altivec_vpks<VI_char>ss): Likewise.
    (altivec_vpks<VI_char>us): Likewise.
    (altivec_vpku<VI_char>us): Likewise.
    (altivec_vpku<VI_char>um): Likewise.
    (altivec_vrl<VI_char>): Likewise.
    (altivec_vsl<VI_char>): Likewise.
    (altivec_vsr<VI_char>): Likewise.
    (altivec_vsra<VI_char>): Likewise.
    (altivec_vsldoi_<mode>): Likewise.
    (altivec_vupkhsb): Likewise.
    (altivec_vupkhs<VU_char>): Likewise.
    (altivec_vupkls<VU_char>): Likewise.
    (altivec_vupkhsh): Likewise.
    (altivec_vupklsb): Likewise.
    (altivec_vupklsh): Likewise.
    (altivec_vcmpequ<VI_char>_p): Likewise.
    (altivec_vcmpgts<VI_char>_p): Likewise.
    (altivec_vcmpgtu<VI_char>_p): Likewise.
    (abs<mode>2): Likewise.
    (vec_unpacks_hi_v16qi): Likewise.
    (vec_unpacks_hi_v8hi): Likewise.
    (vec_unpacks_lo_v16qi): Likewise.
    (vec_unpacks_hi_<VP_small_lc>): Likewise.
    (vec_unpacks_lo_v8hi): Likewise.
    (vec_unpacks_lo_<VP_small_lc>): Likewise.
    (vec_pack_trunc_v8h): Likewise.
    (vec_pack_trunc_v4si): Likewise.
    (vec_pack_trunc_<mode>): Likewise.

    * config/rs6000/altivec.h (vec_vaddudm): Add defines for power8
    V2DI builtins.
    (vec_vmaxsd): Likewise.
    (vec_vmaxud): Likewise.
    (vec_vminsd): Likewise.
    (vec_vminud): Likewise.
    (vec_vpksdss): Likewise.
    (vec_vpksdus): Likewise.
    (vec_vpkudum): Likewise.
    (vec_vpkudus): Likewise.
    (vec_vrld): Likewise.
    (vec_vsld): Likewise.
    (vec_vsrad): Likewise.
    (vec_vsrd): Likewise.
    (vec_vsubudm): Likewise.
    (vec_vupkhsw): Likewise.
    (vec_vupklsw): Likewise.

    2013-05-22  Michael Meissner  <meissner@linux.vnet.ibm.com>
            Pat Haugen <pthaugen@us.ibm.com>
            Peter Bergner <bergner@vnet.ibm.com>

    * doc/extend.texi (PowerPC AltiVec/VSX Built-in Functions): Add
    documentation for the power8 crypto builtins.

    * config/rs6000/t-rs6000 (MD_INCLUDES): Add crypto.md.

    * config/rs6000/rs6000-builtin.def (BU_P8V_AV_1): Add support
    macros for defining power8 builtin functions.
    (BU_P8V_AV_2): Likewise.
    (BU_P8V_AV_P): Likewise.
    (BU_P8V_VSX_1): Likewise.
    (BU_P8V_OVERLOAD_1): Likewise.
    (BU_P8V_OVERLOAD_2): Likewise.
    (BU_CRYPTO_1): Likewise.
    (BU_CRYPTO_2): Likewise.
    (BU_CRYPTO_3): Likewise.
    (BU_CRYPTO_OVERLOAD_1): Likewise.
    (BU_CRYPTO_OVERLOAD_2): Likewise.
    (XSCVSPDP): Fix typo, point to the correct instruction.
    (VCIPHER): Add power8 crypto builtins.
    (VCIPHERLAST): Likewise.
    (VNCIPHER): Likewise.
    (VNCIPHERLAST): Likewise.
    (VPMSUMB): Likewise.
    (VPMSUMH): Likewise.
    (VPMSUMW): Likewise.
    (VPERMXOR_V2DI): Likewise.
    (VPERMXOR_V4SI: Likewise.
    (VPERMXOR_V8HI: Likewise.
    (VPERMXOR_V16QI: Likewise.
    (VSHASIGMAW): Likewise.
    (VSHASIGMAD): Likewise.
    (VPMSUM): Likewise.
    (VPERMXOR): Likewise.
    (VSHASIGMA): Likewise.

    * config/rs6000/rs6000-c.c (rs6000_target_modify_macros): Define
    __CRYPTO__ if the crypto instructions are available.
    (altivec_overloaded_builtins): Add support for overloaded power8
    builtins.

    * config/rs6000/rs6000.c (rs6000_expand_ternop_builtin): Add
    support for power8 crypto builtins.
    (builtin_function_type): Likewise.
    (altivec_init_builtins): Add support for builtins that take vector
    long long (V2DI) arguments.

    * config/rs6000/crypto.md: New file, define power8 crypto
    instructions.

    2013-05-22  Michael Meissner  <meissner@linux.vnet.ibm.com>
            Pat Haugen <pthaugen@us.ibm.com>
            Peter Bergner <bergner@vnet.ibm.com>

    * doc/invoke.texi (Option Summary): Add power8 options.
    (RS/6000 and PowerPC Options): Likewise.

    * doc/md.texi (PowerPC and IBM RS6000 constraints): Update to use
    constraints.md instead of rs6000.h.  Reorder w* constraints.  Add
    wm, wn, wr documentation.

    * gcc/config/rs6000/constraints.md (wm): New constraint for VSX
    registers if direct move instructions are enabled.
    (wn): New constraint for no registers.
    (wq): New constraint for quad word even GPR registers.
    (wr): New constraint if 64-bit instructions are enabled.
    (wv): New constraint if power8 vector instructions are enabled.
    (wQ): New constraint for quad word memory locations.

    * gcc/config/rs6000/predicates.md (const_0_to_15_operand): New
    constraint for 0..15 for crypto instructions.
    (gpc_reg_operand): If VSX allow registers in VSX registers as well
    as GPR and floating point registers.
    (int_reg_operand): New predicate to match only GPR registers.
    (base_reg_operand): New predicate to match base registers.
    (quad_int_reg_operand): New predicate to match even GPR registers
    for quad memory operations.
    (vsx_reg_or_cint_operand): New predicate to allow vector logical
    operations in both GPR and VSX registers.
    (quad_memory_operand): New predicate for quad memory operations.
    (reg_or_indexed_operand): New predicate for direct move support.

    * gcc/config/rs6000/rs6000-cpus.def (ISA_2_5_MASKS_EMBEDDED):
    Inherit from ISA_2_4_MASKS, not ISA_2_2_MASKS.
    (ISA_2_7_MASKS_SERVER): New mask for ISA 2.07 (i.e. power8).
    (POWERPC_MASKS): Add power8 options.
    (power8 cpu): Use ISA_2_7_MASKS_SERVER instead of specifying the
    various options.

    * gcc/config/rs6000/rs6000-c.c (rs6000_target_modify_macros):
    Define _ARCH_PWR8 and __POWER8_VECTOR__ for power8.

    * gcc/config/rs6000/rs6000.opt (-mvsx-timode): Add documentation.
    (-mpower8-fusion): New power8 options.
    (-mpower8-fusion-sign): Likewise.
    (-mpower8-vector): Likewise.
    (-mcrypto): Likewise.
    (-mdirect-move): Likewise.
    (-mquad-memory): Likewise.

    * gcc/config/rs6000/rs6000.c (power8_cost): Initial definition for
    power8.
    (rs6000_hard_regno_mode_ok): Make PTImode only match even GPR
    registers.
    (rs6000_debug_reg_print): Print the base register class if
    -mdebug=reg.
    (rs6000_debug_vector_unit): Add p8_vector.
    (rs6000_debug_reg_global): If -mdebug=reg, print power8 constraint
    definitions.  Also print fusion state.
    (rs6000_init_hard_regno_mode_ok): Set up power8 constraints.
    (rs6000_builtin_mask_calculate): Add power8 builtin support.
    (rs6000_option_override_internal): Add support for power8.
    (rs6000_common_init_builtins): Add debugging for skipped builtins
    if -mdebug=builtin.
    (rs6000_adjust_cost): Add power8 support.
    (rs6000_issue_rate): Likewise.
    (insn_must_be_first_in_group): Likewise.
    (insn_must_be_last_in_group): Likewise.
    (force_new_group): Likewise.
    (rs6000_register_move_cost): Likewise.
    (rs6000_opt_masks): Likewise.

    * config/rs6000/rs6000.h (ASM_CPU_POWER8_SPEC): If we don't have a
    power8 capable assembler, default to power7 options.
    (TARGET_DIRECT_MOVE): Likewise.
    (TARGET_CRYPTO): Likewise.
    (TARGET_P8_VECTOR): Likewise.
    (VECTOR_UNIT_P8_VECTOR_P): Define power8 vector support.
    (VECTOR_UNIT_VSX_OR_P8_VECTOR_P): Likewise.
    (VECTOR_MEM_P8_VECTOR_P): Likewise.
    (VECTOR_MEM_VSX_OR_P8_VECTOR_P): Likewise.
    (VECTOR_MEM_ALTIVEC_OR_VSX_P): Likewise.
    (TARGET_XSCVDPSPN): Likewise.
    (TARGET_XSCVSPDPN): Likewsie.
    (TARGET_SYNC_HI_QI): Likewise.
    (TARGET_SYNC_TI): Likewise.
    (MASK_CRYPTO): Likewise.
    (MASK_DIRECT_MOVE): Likewise.
    (MASK_P8_FUSION): Likewise.
    (MASK_P8_VECTOR): Likewise.
    (REG_ALLOC_ORDER): Move fr13 to be lower in priority so that the
    TFmode temporary used by some of the direct move instructions to
    get two FP temporary registers does not force creation of a stack
    frame.
    (VLOGICAL_REGNO_P): Allow vector logical operations in GPRs.
    (MODES_TIEABLE_P): Move the VSX tests above the Altivec tests so
    that any VSX registers are tieable, even if they are also an
    Altivec vector mode.
    (r6000_reg_class_enum): Add wm, wr, wv constraints.
    (RS6000_BTM_P8_VECTOR): Power8 builtin support.
    (RS6000_BTM_CRYPTO): Likewise.
    (RS6000_BTM_COMMON): Likewise.

    * config/rs6000/rs6000.md (cpu attribute): Add power8.
    * config/rs6000/rs6000-opts.h (PROCESSOR_POWER8): Likewise.
    (enum rs6000_vector): Add power8 vector support.


    Backport from mainline
    2013-03-20  Pat Haugen <pthaugen@us.ibm.com>

    * config/rs6000/predicates.md (indexed_address, update_address_mem
    update_indexed_address_mem): New predicates.
    * config/rs6000/vsx.md (vsx_extract_<mode>_zero): Set correct "type"
    attribute for load/store instructions.
    * config/rs6000/dfp.md (movsd_store): Likewise.
    (movsd_load): Likewise.
    * config/rs6000/rs6000.md (zero_extend<mode>di2_internal1): Likewise.
    (unnamed HI->DI extend define_insn): Likewise.
    (unnamed SI->DI extend define_insn): Likewise.
    (unnamed QI->SI extend define_insn): Likewise.
    (unnamed QI->HI extend define_insn): Likewise.
    (unnamed HI->SI extend define_insn): Likewise.
    (unnamed HI->SI extend define_insn): Likewise.
    (extendsfdf2_fpr): Likewise.
    (movsi_internal1): Likewise.
    (movsi_internal1_single): Likewise.
    (movhi_internal): Likewise.
    (movqi_internal): Likewise.
    (movcc_internal1): Correct mnemonic for stw insn. Set correct "type"
    attribute for load/store instructions.
    (mov<mode>_hardfloat): Set correct "type" attribute for load/store
    instructions.
    (mov<mode>_softfloat): Likewise.
    (mov<mode>_hardfloat32): Likewise.
    (mov<mode>_hardfloat64): Likewise.
    (mov<mode>_softfloat64): Likewise.
    (movdi_internal32): Likewise.
    (movdi_internal64): Likewise.
    (probe_stack_<mode>): Likewise.

    Backport from mainline
    2013-03-20  Michael Meissner  <meissner@linux.vnet.ibm.com>

    * config/rs6000/vector.md (VEC_R): Add 32-bit integer, binary
    floating point, and decimal floating point to reload iterator.

    * config/rs6000/constraints.md (wl constraint): New constraints to
    return FLOAT_REGS if certain options are used to reduce the number
    of separate patterns that exist in the file.
    (wx constraint): Likewise.
    (wz constraint): Likewise.

    * config/rs6000/rs6000.c (rs6000_debug_reg_global): If
    -mdebug=reg, print wg, wl, wx, and wz constraints.
    (rs6000_init_hard_regno_mode_ok): Initialize new constraints.
    Initialize the reload functions for 64-bit binary/decimal floating
    point types.
    (reg_offset_addressing_ok_p): If we are on a power7 or later, use
    LFIWZX and STFIWX to load/store 32-bit decimal types, and don't
    create the buffer on the stack to overcome not having a 32-bit
    load and store.
    (rs6000_emit_move): Likewise.
    (rs6000_secondary_memory_needed_rtx): Likewise.
    (rs6000_alloc_sdmode_stack_slot): Likewise.
    (rs6000_preferred_reload_class): On VSX, we can create SFmode 0.0f
    via xxlxor, just like DFmode 0.0.

    * config/rs6000/rs6000.h (TARGET_NO_SDMODE_STACK): New macro)
    (define as 1 if we are running on a power7 or newer.
    (enum r6000_reg_class_enum): Add new constraints.

    * config/rs6000/dfp.md (movsd): Delete, combine with binary
    floating point moves in rs6000.md.  Combine power6x (mfpgpr) moves
    with other moves by using conditional constraits (wg).  Use LFIWZX
    and STFIWX for loading SDmode on power7.  Use xxlxor to create
    0.0f.
    (movsd splitter): Likewise.
    (movsd_hardfloat): Likewise.
    (movsd_softfloat): Likewise.

    * config/rs6000/rs6000.md (FMOVE32): New iterators to combine
    binary and decimal floating point moves.
    (fmove_ok): New attributes to combine binary and decimal floating
    point moves, and to combine power6x (mfpgpr) moves along normal
    floating moves.
    (real_value_to_target): Likewise.
    (f32_lr): Likewise.
    (f32_lm): Likewise.
    (f32_li): Likewise.
    (f32_sr): Likewise.
    (f32_sm): Likewise.
    (f32_si): Likewise.
    (movsf): Combine binary and decimal floating point moves.  Combine
    power6x (mfpgpr) moves with other moves by using conditional
    constraits (wg).  Use LFIWZX and STFIWX for loading SDmode on
    power7.
    (mov<mode> for SFmode/SDmode); Likewise.
    (SFmode/SDmode splitters): Likewise.
    (movsf_hardfloat): Likewise.
    (mov<mode>_hardfloat for SFmode/SDmode): Likewise.
    (movsf_softfloat): Likewise.
    (mov<mode>_softfloat for SFmode/SDmode): Likewise.

    * doc/md.texi (PowerPC and IBM RS6000 constraints): Document wl)
    (wx and wz constraints.

    * config/rs6000/constraints.md (wg constraint): New constraint to
    return FLOAT_REGS if -mmfpgpr (power6x) was used.

    * config/rs6000/rs6000.h (enum r6000_reg_class_enum): Add wg
    constraint.

    * config/rs6000/rs6000.c (rs6000_debug_reg_global): If
    -mdebug=reg, print wg, wl, wx, and wz constraints.
    (rs6000_init_hard_regno_mode_ok): Initialize new constraints.
    Initialize the reload functions for 64-bit binary/decimal floating
    point types.
    (reg_offset_addressing_ok_p): If we are on a power7 or later, use
    LFIWZX and STFIWX to load/store 32-bit decimal types, and don't
    create the buffer on the stack to overcome not having a 32-bit
    load and store.
    (rs6000_emit_move): Likewise.
    (rs6000_secondary_memory_needed_rtx): Likewise.
    (rs6000_alloc_sdmode_stack_slot): Likewise.
    (rs6000_preferred_reload_class): On VSX, we can create SFmode 0.0f
    via xxlxor, just like DFmode 0.0.


    * config/rs6000/dfp.md (movdd): Delete, combine with binary
    floating point moves in rs6000.md.  Combine power6x (mfpgpr) moves
    with other moves by using conditional constraits (wg).  Use LFIWZX
    and STFIWX for loading SDmode on power7.
    (movdd splitters): Likewise.
    (movdd_hardfloat32): Likewise.
    (movdd_softfloat32): Likewise.
    (movdd_hardfloat64_mfpgpr): Likewise.
    (movdd_hardfloat64): Likewise.
    (movdd_softfloat64): Likewise.

    * config/rs6000/rs6000.md (FMOVE64): New iterators to combine
    64-bit binary and decimal floating point moves.
    (FMOVE64X): Likewise.
    (movdf): Combine 64-bit binary and decimal floating point moves.
    Combine power6x (mfpgpr) moves with other moves by using
    conditional constraits (wg).
    (mov<mode> for DFmode/DDmode): Likewise.
    (DFmode/DDmode splitters): Likewise.
    (movdf_hardfloat32): Likewise.
    (mov<mode>_hardfloat32 for DFmode/DDmode): Likewise.
    (movdf_softfloat32): Likewise.
    (movdf_hardfloat64_mfpgpr): Likewise.
    (movdf_hardfloat64): Likewise.
    (mov<mode>_hardfloat64 for DFmode/DDmode): Likewise.
    (movdf_softfloat64): Likewise.
    (mov<mode>_softfloat64 for DFmode/DDmode): Likewise.
    (reload_<mode>_load): Move to later in the file so they aren't in
    the middle of the floating point move insns.
    (reload_<mode>_store): Likewise.

    * doc/md.texi (PowerPC and IBM RS6000 constraints): Document wg
    constraint.

    * config/rs6000/rs6000.c (rs6000_debug_reg_global): Print out wg
    constraint if -mdebug=reg.
    (rs6000_initi_hard_regno_mode_ok): Enable wg constraint if
    -mfpgpr.  Enable using dd reload support if needed.

    * config/rs6000/dfp.md (movtd): Delete, combine with 128-bit
    binary and decimal floating point moves in rs6000.md.
    (movtd_internal): Likewise.

    * config/rs6000/rs6000.md (FMOVE128): Combine 128-bit binary and
    decimal floating point moves.
    (movtf): Likewise.
    (movtf_internal): Likewise.
    (mov<mode>_internal, TDmode/TFmode): Likewise.
    (movtf_softfloat): Likewise.
    (mov<mode>_softfloat, TDmode/TFmode): Likewise.

    * config/rs6000/rs6000.md (movdi_mfpgpr): Delete, combine with
    movdi_internal64, using wg constraint for move direct operations.
    (movdi_internal64): Likewise.

    * config/rs6000/rs6000.c (rs6000_debug_reg_global): Print
    MODES_TIEABLE_P for selected modes.  Print the numerical value of
    the various virtual registers. Use GPR/FPR first/last values)
    (instead of hard coding the register numbers.  Print which modes
    have reload functions registered.
    (rs6000_option_override_internal): If -mdebug=reg, trace the
    options settings before/after setting cpu, target and subtarget
    settings.
    (rs6000_secondary_reload_trace): Improve the RTL dump for
    -mdebug=addr and for secondary reload failures in
    rs6000_secondary_reload_inner.
    (rs6000_secondary_reload_fail): Likewise.
    (rs6000_secondary_reload_inner): Likewise.

    * config/rs6000/rs6000.md (FIRST_GPR_REGNO): Add convenience
    macros for first/last GPR and FPR registers.
    (LAST_GPR_REGNO): Likewise.
    (FIRST_FPR_REGNO): Likewise.
    (LAST_FPR_REGNO): Likewise.

    * config/rs6000/vector.md (mul<mode>3): Use the combined macro
    VECTOR_UNIT_ALTIVEC_OR_VSX_P instead of separate calls to
    VECTOR_UNIT_ALTIVEC_P and VECTOR_UNIT_VSX_P.
    (vcond<mode><mode>): Likewise.
    (vcondu<mode><mode>): Likewise.
    (vector_gtu<mode>): Likewise.
    (vector_gte<mode>): Likewise.
    (xor<mode>3): Don't allow logical operations on TImode in 32-bit
    to prevent the compiler from converting DImode operations to
    TImode.
    (ior<mode>3): Likewise.
    (and<mode>3): Likewise.
    (one_cmpl<mode>2): Likewise.
    (nor<mode>3): Likewise.
    (andc<mode>3): Likewise.

    * config/rs6000/constraints.md (wt constraint): New constraint
    that returns VSX_REGS if TImode is allowed in VSX registers.

    * config/rs6000/predicates.md (easy_fp_constant): 0.0f is an easy
    constant under VSX.

    * config/rs6000/rs6000-modes.def (PTImode): Define, PTImode is
    similar to TImode, but it is restricted to being in the GPRs.

    * config/rs6000/rs6000.opt (-mvsx-timode): New switch to allow
    TImode to occupy a single VSX register.

    * config/rs6000/rs6000-cpus.def (ISA_2_6_MASKS_SERVER): Default to
    -mvsx-timode for power7/power8.
    (power7 cpu): Likewise.
    (power8 cpu): Likewise.

    * config/rs6000/rs6000.c (rs6000_hard_regno_nregs_internal): Make
    sure that TFmode/TDmode take up two registers if they are ever
    allowed in the upper VSX registers.
    (rs6000_hard_regno_mode_ok): If -mvsx-timode, allow TImode in VSX
    registers.
    (rs6000_init_hard_regno_mode_ok): Likewise.
    (rs6000_debug_reg_global): Add debugging for PTImode and wt
    constraint.  Print if LRA is turned on.
    (rs6000_option_override_internal): Give an error if -mvsx-timode
    and VSX is not enabled.
    (invalid_e500_subreg): Handle PTImode, restricting it to GPRs.  If
    -mvsx-timode, restrict TImode to reg+reg addressing, and PTImode
    to reg+offset addressing.  Use PTImode when checking offset
    addresses for validity.
    (reg_offset_addressing_ok_p): Likewise.
    (rs6000_legitimate_offset_address_p): Likewise.
    (rs6000_legitimize_address): Likewise.
    (rs6000_legitimize_reload_address): Likewise.
    (rs6000_legitimate_address_p): Likewise.
    (rs6000_eliminate_indexed_memrefs): Likewise.
    (rs6000_emit_move): Likewise.
    (rs6000_secondary_reload): Likewise.
    (rs6000_secondary_reload_inner): Handle PTImode.  Allow 64-bit
    reloads to fpr registers to continue to use reg+offset addressing)
    (but 64-bit reloads to altivec registers need reg+reg addressing.
    Drop test for PRE_MODIFY, since VSX loads/stores no longer support
    it.  Treat LO_SUM like a PLUS operation.
    (rs6000_secondary_reload_class): If type is 64-bit, prefer to use
    FLOAT_REGS instead of VSX_RGS to allow use of reg+offset
    addressing.
    (rs6000_cannot_change_mode_class): Do not allow TImode in VSX
    registers to share a register with a smaller sized type, since VSX
    puts scalars in the upper 64-bits.
    (print_operand): Add support for PTImode.
    (rs6000_register_move_cost): Use VECTOR_MEM_VSX_P instead of
    VECTOR_UNIT_VSX_P to catch types that can be loaded in VSX
    registers, but don't have arithmetic support.
    (rs6000_memory_move_cost): Add test for VSX.
    (rs6000_opt_masks): Add -mvsx-timode.

    * config/rs6000/vsx.md (VSm): Change to use 64-bit aligned moves
    for TImode.
    (VSs): Likewise.
    (VSr): Use wt constraint for TImode.
    (VSv): Drop TImode support.
    (vsx_movti): Delete, replace with versions for 32-bit and 64-bit.
    (vsx_movti_64bit): Likewise.
    (vsx_movti_32bit): Likewise.
    (vec_store_<mode>): Use VSX iterator instead of vector iterator.
    (vsx_and<mode>3): Delete use of '?' constraint on inputs, just put
    one '?' on the appropriate output constraint.  Do not allow TImode
    logical operations on 32-bit systems.
    (vsx_ior<mode>3): Likewise.
    (vsx_xor<mode>3): Likewise.
    (vsx_one_cmpl<mode>2): Likewise.
    (vsx_nor<mode>3): Likewise.
    (vsx_andc<mode>3): Likewise.
    (vsx_concat_<mode>): Likewise.
    (vsx_xxpermdi_<mode>): Fix thinko for non V2DF/V2DI modes.

    * config/rs6000/rs6000.h (MASK_VSX_TIMODE): Map from
    OPTION_MASK_VSX_TIMODE.
    (enum rs6000_reg_class_enum): Add RS6000_CONSTRAINT_wt.
    (STACK_SAVEAREA_MODE): Use PTImode instead of TImode.

    * config/rs6000/rs6000.md (INT mode attribute): Add PTImode.
    (TI2 iterator): New iterator for TImode, PTImode.
    (wd mode attribute): Add values for vector types.
    (movti_string): Replace TI move operations with operations for
    TImode and PTImode.  Add support for TImode being allowed in VSX
    registers.
    (mov<mode>_string, TImode/PTImode): Likewise.
    (movti_ppc64): Likewise.
    (mov<mode>_ppc64, TImode/PTImode): Likewise.
    (TI mode splitters): Likewise.

    * doc/md.texi (PowerPC and IBM RS6000 constraints): Document wt
    constraint.


[gcc/testsuite]

2014-04-04  Bill Schmidt  <wschmidt@linux.vnet.ibm.com>

    Backport from mainline
    2013-11-22  Michael Meissner  <meissner@linux.vnet.ibm.com>

    PR target/59054
    * gcc.target/powerpc/direct-move.h (VSX_REG_ATTR): Allow test to
    specify an appropriate register class for VSX operations.
    (load_vsx): Use it.
    (load_gpr_to_vsx): Likewise.
    (load_vsx_to_gpr): Likewise.
    * gcc.target/powerpc/direct-move-vint1.c: Use an appropriate
    register class for VSX registers that the type can handle.  Remove
    checks for explicit number of instructions generated, just check
    if the instruction is generated.
    * gcc.target/powerpc/direct-move-vint2.c: Likewise.
    * gcc.target/powerpc/direct-move-float1.c: Likewise.
    * gcc.target/powerpc/direct-move-float2.c: Likewise.
    * gcc.target/powerpc/direct-move-double1.c: Likewise.
    * gcc.target/powerpc/direct-move-double2.c: Likewise.
    * gcc.target/powerpc/direct-move-long1.c: Likewise.
    * gcc.target/powerpc/direct-move-long2.c: Likewise.

    * gcc.target/powerpc/bool3-av.c: Limit to 64-bit mode for now.
    * gcc.target/powerpc/bool3-p7.c: Likewise.
    * gcc.target/powerpc/bool3-p8.c: Likewise.

    * gcc.target/powerpc/p8vector-ldst.c: Just check that the
    appropriate instructions are generated, don't check the count.

    2013-11-12  Michael Meissner  <meissner@linux.vnet.ibm.com>

    PR target/59054
    * gcc.target/powerpc/pr59054.c: New test.

    2013-08-22  Michael Meissner  <meissner@linux.vnet.ibm.com>

    * gcc.target/powerpc/pr57744.c: Declare abort.

    2013-07-18  Pat Haugen  <pthaugen@us.ibm.com>

    * gcc.target/powerpc/pr57744.c: Fix typo.

    Back port from mainline
    2013-10-03  Michael Meissner  <meissner@linux.vnet.ibm.com>

    * gcc.target/powerpc/p8vector-fp.c: New test for floating point
    scalar operations when using -mupper-regs-sf and -mupper-regs-df.
    * gcc.target/powerpc/ppc-target-1.c: Update tests to allow either
    VSX scalar operations or the traditional floating point form of
    the instruction.
    * gcc.target/powerpc/ppc-target-2.c: Likewise.
    * gcc.target/powerpc/recip-3.c: Likewise.
    * gcc.target/powerpc/recip-5.c: Likewise.
    * gcc.target/powerpc/pr72747.c: Likewise.
    * gcc.target/powerpc/vsx-builtin-3.c: Likewise.

    Back port from mainline
    2013-09-27  Michael Meissner  <meissner@linux.vnet.ibm.com>

    * gcc.target/powerpc/p8vector-ldst.c: New test for -mupper-regs-sf
    and -mupper-regs-df.

    Back port from mainline
    2013-10-17  Michael Meissner  <meissner@linux.vnet.ibm.com>

    PR target/58673
    * gcc.target/powerpc/pr58673-1.c: New file to test whether
    -mquad-word + -mno-vsx-timode causes errors.
    * gcc.target/powerpc/pr58673-2.c: Likewise.


    Backport from trunk.
    2013-07-23  Michael Meissner  <meissner@linux.vnet.ibm.com>

    * gcc.target/powerpc/bool2.h: New file, test the code generation
    of logical operations for power5, altivec, power7, and power8 systems.
    * gcc.target/powerpc/bool2-p5.c: Likewise.
    * gcc.target/powerpc/bool2-av.c: Likewise.
    * gcc.target/powerpc/bool2-p7.c: Likewise.
    * gcc.target/powerpc/bool2-p8.c: Likewise.
    * gcc.target/powerpc/bool3.h: Likewise.
    * gcc.target/powerpc/bool3-av.c: Likewise.
    * gcc.target/powerpc/bool2-p7.c: Likewise.
    * gcc.target/powerpc/bool2-p8.c: Likewise.

    Backport from trunk.
    2013-07-31  Michael Meissner  <meissner@linux.vnet.ibm.com>

    * gcc.target/powerpc/fusion.c: New file, test power8 fusion support.

    Back port from the trunk
    2013-06-28  Michael Meissner  <meissner@linux.vnet.ibm.com>

    PR target/57744
    * gcc.target/powerpc/pr57744.c: New test to make sure lqarx and
    stqcx. get even registers.

    Back port from the trunk

    2013-06-12  Michael Meissner  <meissner@linux.vnet.ibm.com>
            Pat Haugen <pthaugen@us.ibm.com>
            Peter Bergner <bergner@vnet.ibm.com>

    * gcc.target/powerpc/atomic-p7.c: New file, add tests for atomic
    load/store instructions on power7, power8.
    * gcc.target/powerpc/atomic-p8.c: Likewise.

    Back port from the trunk

    2013-06-10  Michael Meissner  <meissner@linux.vnet.ibm.com>
            Pat Haugen <pthaugen@us.ibm.com>
            Peter Bergner <bergner@vnet.ibm.com>

    * gcc.target/powerpc/direct-move-vint1.c: New tests for power8
    direct move instructions.
    * gcc.target/powerpc/direct-move-vint2.c: Likewise.
    * gcc.target/powerpc/direct-move.h: Likewise.
    * gcc.target/powerpc/direct-move-float1.c: Likewise.
    * gcc.target/powerpc/direct-move-float2.c: Likewise.
    * gcc.target/powerpc/direct-move-double1.c: Likewise.
    * gcc.target/powerpc/direct-move-double2.c: Likewise.
    * gcc.target/powerpc/direct-move-long1.c: Likewise.
    * gcc.target/powerpc/direct-move-long2.c: Likewise.

    Backport from the trunk

    2013-06-06  Michael Meissner  <meissner@linux.vnet.ibm.com>
            Pat Haugen <pthaugen@us.ibm.com>
            Peter Bergner <bergner@vnet.ibm.com>

    * gcc.target/powerpc/p8vector-builtin-1.c: New test to test
    power8 builtin functions.
    * gcc/testsuite/gcc.target/powerpc/p8vector-builtin-2.c: Likewise.
    * gcc/testsuite/gcc.target/powerpc/p8vector-builtin-3.c: Likewise.
    * gcc/testsuite/gcc.target/powerpc/p8vector-builtin-4.c: Likewise.
    * gcc/testsuite/gcc.target/powerpc/p8vector-builtin-5.c: Likewise.
    * gcc/testsuite/gcc.target/powerpc/p8vector-builtin-6.c: Likewise.
    * gcc/testsuite/gcc.target/powerpc/p8vector-builtin-7.c: Likewise.
    * gcc/testsuite/gcc.target/powerpc/p8vector-vectorize-1.c: New
    tests to test power8 auto-vectorization.
    * gcc/testsuite/gcc.target/powerpc/p8vector-vectorize-2.c: Likewise.
    * gcc/testsuite/gcc.target/powerpc/p8vector-vectorize-3.c: Likewise.
    * gcc/testsuite/gcc.target/powerpc/p8vector-vectorize-4.c: Likewise.
    * gcc/testsuite/gcc.target/powerpc/p8vector-vectorize-5.c: Likewise.

    * gcc.target/powerpc/crypto-builtin-1.c: Use effective target
    powerpc_p8vector_ok instead of powerpc_vsx_ok.

    * gcc.target/powerpc/bool.c: New file, add eqv, nand, nor tests.

    * lib/target-supports.exp (check_p8vector_hw_available) Add power8
    support.
    (check_effective_target_powerpc_p8vector_ok): Likewise.
    (is-effective-target): Likewise.
    (check_vect_support_and_set_flags): Likewise.

    Backport from trunk

    2013-05-22  Michael Meissner  <meissner@linux.vnet.ibm.com>
            Pat Haugen <pthaugen@us.ibm.com>
            Peter Bergner <bergner@vnet.ibm.com>

    * gcc.target/powerpc/crypto-builtin-1.c: New file, test for power8
    crypto builtins.

    Backport from mainline
    2013-03-20  Michael Meissner  <meissner@linux.vnet.ibm.com>

    * gcc.target/powerpc/mmfpgpr.c: New test.
    * gcc.target/powerpc/sd-vsx.c: Likewise.
    * gcc.target/powerpc/sd-pwr6.c: Likewise.
    * gcc.target/powerpc/vsx-float0.c: Likewise.


Added:
    branches/gcc-4_8-branch/gcc/config/rs6000/crypto.md
    branches/gcc-4_8-branch/gcc/config/rs6000/power8.md
    branches/gcc-4_8-branch/gcc/testsuite/gcc.target/powerpc/atomic-p7.c
    branches/gcc-4_8-branch/gcc/testsuite/gcc.target/powerpc/atomic-p8.c
    branches/gcc-4_8-branch/gcc/testsuite/gcc.target/powerpc/bool.c
    branches/gcc-4_8-branch/gcc/testsuite/gcc.target/powerpc/bool2-av.c
    branches/gcc-4_8-branch/gcc/testsuite/gcc.target/powerpc/bool2-p5.c
    branches/gcc-4_8-branch/gcc/testsuite/gcc.target/powerpc/bool2-p7.c
    branches/gcc-4_8-branch/gcc/testsuite/gcc.target/powerpc/bool2-p8.c
    branches/gcc-4_8-branch/gcc/testsuite/gcc.target/powerpc/bool2.h
    branches/gcc-4_8-branch/gcc/testsuite/gcc.target/powerpc/bool3-av.c
    branches/gcc-4_8-branch/gcc/testsuite/gcc.target/powerpc/bool3-p7.c
    branches/gcc-4_8-branch/gcc/testsuite/gcc.target/powerpc/bool3-p8.c
    branches/gcc-4_8-branch/gcc/testsuite/gcc.target/powerpc/bool3.h
    branches/gcc-4_8-branch/gcc/testsuite/gcc.target/powerpc/crypto-builtin-1.c
   
branches/gcc-4_8-branch/gcc/testsuite/gcc.target/powerpc/direct-move-double1.c
   
branches/gcc-4_8-branch/gcc/testsuite/gcc.target/powerpc/direct-move-double2.c
   
branches/gcc-4_8-branch/gcc/testsuite/gcc.target/powerpc/direct-move-float1.c
   
branches/gcc-4_8-branch/gcc/testsuite/gcc.target/powerpc/direct-move-float2.c
   
branches/gcc-4_8-branch/gcc/testsuite/gcc.target/powerpc/direct-move-long1.c
   
branches/gcc-4_8-branch/gcc/testsuite/gcc.target/powerpc/direct-move-long2.c
   
branches/gcc-4_8-branch/gcc/testsuite/gcc.target/powerpc/direct-move-vint1.c
   
branches/gcc-4_8-branch/gcc/testsuite/gcc.target/powerpc/direct-move-vint2.c
    branches/gcc-4_8-branch/gcc/testsuite/gcc.target/powerpc/direct-move.h
    branches/gcc-4_8-branch/gcc/testsuite/gcc.target/powerpc/fusion.c
    branches/gcc-4_8-branch/gcc/testsuite/gcc.target/powerpc/mmfpgpr.c
   
branches/gcc-4_8-branch/gcc/testsuite/gcc.target/powerpc/p8vector-builtin-1.c
   
branches/gcc-4_8-branch/gcc/testsuite/gcc.target/powerpc/p8vector-builtin-2.c
   
branches/gcc-4_8-branch/gcc/testsuite/gcc.target/powerpc/p8vector-builtin-3.c
   
branches/gcc-4_8-branch/gcc/testsuite/gcc.target/powerpc/p8vector-builtin-4.c
   
branches/gcc-4_8-branch/gcc/testsuite/gcc.target/powerpc/p8vector-builtin-5.c
   
branches/gcc-4_8-branch/gcc/testsuite/gcc.target/powerpc/p8vector-builtin-6.c
   
branches/gcc-4_8-branch/gcc/testsuite/gcc.target/powerpc/p8vector-builtin-7.c
    branches/gcc-4_8-branch/gcc/testsuite/gcc.target/powerpc/p8vector-fp.c
    branches/gcc-4_8-branch/gcc/testsuite/gcc.target/powerpc/p8vector-ldst.c
   
branches/gcc-4_8-branch/gcc/testsuite/gcc.target/powerpc/p8vector-vectorize-1.c
   
branches/gcc-4_8-branch/gcc/testsuite/gcc.target/powerpc/p8vector-vectorize-2.c
   
branches/gcc-4_8-branch/gcc/testsuite/gcc.target/powerpc/p8vector-vectorize-3.c
   
branches/gcc-4_8-branch/gcc/testsuite/gcc.target/powerpc/p8vector-vectorize-4.c
   
branches/gcc-4_8-branch/gcc/testsuite/gcc.target/powerpc/p8vector-vectorize-5.c
    branches/gcc-4_8-branch/gcc/testsuite/gcc.target/powerpc/pr57744.c
    branches/gcc-4_8-branch/gcc/testsuite/gcc.target/powerpc/pr58673-1.c
    branches/gcc-4_8-branch/gcc/testsuite/gcc.target/powerpc/pr58673-2.c
    branches/gcc-4_8-branch/gcc/testsuite/gcc.target/powerpc/pr59054.c
    branches/gcc-4_8-branch/gcc/testsuite/gcc.target/powerpc/sd-pwr6.c
    branches/gcc-4_8-branch/gcc/testsuite/gcc.target/powerpc/sd-vsx.c
    branches/gcc-4_8-branch/gcc/testsuite/gcc.target/powerpc/vsx-float0.c
Modified:
    branches/gcc-4_8-branch/gcc/ChangeLog
    branches/gcc-4_8-branch/gcc/config/rs6000/altivec.h
    branches/gcc-4_8-branch/gcc/config/rs6000/altivec.md
    branches/gcc-4_8-branch/gcc/config/rs6000/constraints.md
    branches/gcc-4_8-branch/gcc/config/rs6000/dfp.md
    branches/gcc-4_8-branch/gcc/config/rs6000/driver-rs6000.c
    branches/gcc-4_8-branch/gcc/config/rs6000/predicates.md
    branches/gcc-4_8-branch/gcc/config/rs6000/rs6000-builtin.def
    branches/gcc-4_8-branch/gcc/config/rs6000/rs6000-c.c
    branches/gcc-4_8-branch/gcc/config/rs6000/rs6000-cpus.def
    branches/gcc-4_8-branch/gcc/config/rs6000/rs6000-modes.def
    branches/gcc-4_8-branch/gcc/config/rs6000/rs6000-opts.h
    branches/gcc-4_8-branch/gcc/config/rs6000/rs6000-protos.h
    branches/gcc-4_8-branch/gcc/config/rs6000/rs6000.c
    branches/gcc-4_8-branch/gcc/config/rs6000/rs6000.h
    branches/gcc-4_8-branch/gcc/config/rs6000/rs6000.md
    branches/gcc-4_8-branch/gcc/config/rs6000/rs6000.opt
    branches/gcc-4_8-branch/gcc/config/rs6000/sync.md
    branches/gcc-4_8-branch/gcc/config/rs6000/t-rs6000
    branches/gcc-4_8-branch/gcc/config/rs6000/vector.md
    branches/gcc-4_8-branch/gcc/config/rs6000/vsx.md
    branches/gcc-4_8-branch/gcc/doc/extend.texi
    branches/gcc-4_8-branch/gcc/doc/invoke.texi
    branches/gcc-4_8-branch/gcc/doc/md.texi
    branches/gcc-4_8-branch/gcc/testsuite/ChangeLog
    branches/gcc-4_8-branch/gcc/testsuite/gcc.target/powerpc/ppc-target-1.c
    branches/gcc-4_8-branch/gcc/testsuite/gcc.target/powerpc/ppc-target-2.c
    branches/gcc-4_8-branch/gcc/testsuite/gcc.target/powerpc/pr42747.c
    branches/gcc-4_8-branch/gcc/testsuite/gcc.target/powerpc/recip-3.c
    branches/gcc-4_8-branch/gcc/testsuite/gcc.target/powerpc/recip-5.c
    branches/gcc-4_8-branch/gcc/testsuite/gcc.target/powerpc/vsx-builtin-3.c
    branches/gcc-4_8-branch/gcc/testsuite/lib/target-supports.exp


^ permalink raw reply	[flat|nested] 8+ messages in thread

end of thread, other threads:[~2014-04-04 13:40 UTC | newest]

Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
     [not found] <bug-58587-4@http.gcc.gnu.org/bugzilla/>
2013-10-01  4:49 ` [Bug target/58587] Bootstrap error with ada with -mcpu=power7 mpolacek at gcc dot gnu.org
2013-10-01  7:08 ` jakub at gcc dot gnu.org
2013-10-02 19:46 ` meissner at gcc dot gnu.org
2013-10-02 19:55 ` meissner at gcc dot gnu.org
2013-10-03  0:01 ` meissner at gcc dot gnu.org
2013-10-03  0:08 ` meissner at gcc dot gnu.org
2013-10-11 20:46 ` meissner at gcc dot gnu.org
2014-04-04 13:40 ` wschmidt at gcc dot gnu.org

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).