* IEEE format error
@ 1999-09-14 1:49 Andrew Davies
1999-09-14 2:07 ` Sebastien Cayetanot
` (3 more replies)
0 siblings, 4 replies; 15+ messages in thread
From: Andrew Davies @ 1999-09-14 1:49 UTC (permalink / raw)
To: help-gcc
Hi,
I'm trying to get the linker to generate a file in IEEE format for use in
a 68000 embedded application. When I load the file into my simulator (flex
68k) it produces this error:
IEEE695: @00000055 File format error (Unknown CPU type)
I assume this is some missing information that is not being added by the
linker. Dose anybody know how to get it to add this information?
Thanks.
^ permalink raw reply [flat|nested] 15+ messages in thread* Re: IEEE format error
1999-09-14 1:49 IEEE format error Andrew Davies
@ 1999-09-14 2:07 ` Sebastien Cayetanot
1999-09-14 2:56 ` Andrew Davies
` (3 more replies)
1999-09-15 23:59 ` Hans Peter Jepsen
` (2 subsequent siblings)
3 siblings, 4 replies; 15+ messages in thread
From: Sebastien Cayetanot @ 1999-09-14 2:07 UTC (permalink / raw)
To: help-gcc
Hi,
I just would like to know what is the target you use to generate file in IEEE
format ?
I developp a Mips embedded application and my target is mips-mips-elf, what do you
write instead of elf ?
Maybe this idea could help you:
when I compile for a mips processor I must indicate to the compiler that my CPU_TYPE
is a R3000 or R4000 .. .
Thanks
^ permalink raw reply [flat|nested] 15+ messages in thread* Re: IEEE format error
1999-09-14 2:07 ` Sebastien Cayetanot
@ 1999-09-14 2:56 ` Andrew Davies
1999-09-30 23:56 ` Andrew Davies
1999-10-01 0:00 ` Andrew Davies
1999-09-15 2:01 ` Jeffrey A Law
` (2 subsequent siblings)
3 siblings, 2 replies; 15+ messages in thread
From: Andrew Davies @ 1999-09-14 2:56 UTC (permalink / raw)
To: help-gcc
> I just would like to know what is the target you use to generate file in
IEEE
> format ?
The version that I'm using has the option for generating a file in ieee
format. I use the following command in the linker command file to specify
this:
OUTPUT_FORMAT(ieee)
To find out which formats yours supports use the objdump command with the
-i option.
> I developp a Mips embedded application and my target is mips-mips-elf,
what do you
> write instead of elf ?
m68k-coff-ld for the linker
Elf format would be of more use to me but I don't know how to do a build
or patch to make my compiler support it.
>
> Maybe this idea could help you:
>
> when I compile for a mips processor I must indicate to the compiler that
my CPU_TYPE
> is a R3000 or R4000 .. .
I use the command TARGET(m68000) in the linker command file, but that
doesn't work.
^ permalink raw reply [flat|nested] 15+ messages in thread* Re: IEEE format error
1999-09-14 2:56 ` Andrew Davies
@ 1999-09-30 23:56 ` Andrew Davies
1999-10-01 0:00 ` Andrew Davies
1 sibling, 0 replies; 15+ messages in thread
From: Andrew Davies @ 1999-09-30 23:56 UTC (permalink / raw)
To: help-gcc
> I just would like to know what is the target you use to generate file in
IEEE
> format ?
The version that I'm using has the option for generating a file in ieee
format. I use the following command in the linker command file to specify
this:
OUTPUT_FORMAT(ieee)
To find out which formats yours supports use the objdump command with the
-i option.
> I developp a Mips embedded application and my target is mips-mips-elf,
what do you
> write instead of elf ?
m68k-coff-ld for the linker
Elf format would be of more use to me but I don't know how to do a build
or patch to make my compiler support it.
>
> Maybe this idea could help you:
>
> when I compile for a mips processor I must indicate to the compiler that
my CPU_TYPE
> is a R3000 or R4000 .. .
I use the command TARGET(m68000) in the linker command file, but that
doesn't work.
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: IEEE format error
1999-09-14 2:56 ` Andrew Davies
1999-09-30 23:56 ` Andrew Davies
@ 1999-10-01 0:00 ` Andrew Davies
1 sibling, 0 replies; 15+ messages in thread
From: Andrew Davies @ 1999-10-01 0:00 UTC (permalink / raw)
To: help-gcc
> I just would like to know what is the target you use to generate file in
IEEE
> format ?
The version that I'm using has the option for generating a file in ieee
format. I use the following command in the linker command file to specify
this:
OUTPUT_FORMAT(ieee)
To find out which formats yours supports use the objdump command with the
-i option.
> I developp a Mips embedded application and my target is mips-mips-elf,
what do you
> write instead of elf ?
m68k-coff-ld for the linker
Elf format would be of more use to me but I don't know how to do a build
or patch to make my compiler support it.
>
> Maybe this idea could help you:
>
> when I compile for a mips processor I must indicate to the compiler that
my CPU_TYPE
> is a R3000 or R4000 .. .
I use the command TARGET(m68000) in the linker command file, but that
doesn't work.
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: IEEE format error
1999-09-14 2:07 ` Sebastien Cayetanot
1999-09-14 2:56 ` Andrew Davies
@ 1999-09-15 2:01 ` Jeffrey A Law
1999-09-30 23:56 ` Jeffrey A Law
1999-10-01 0:00 ` Jeffrey A Law
1999-09-30 23:56 ` Sebastien Cayetanot
1999-10-01 0:00 ` Sebastien Cayetanot
3 siblings, 2 replies; 15+ messages in thread
From: Jeffrey A Law @ 1999-09-15 2:01 UTC (permalink / raw)
To: Sebastien Cayetanot; +Cc: help-gcc
In message < 37DE0F48.D2786865@dotcom.fr >you write:
> I just would like to know what is the target you use to generate file in
> IEEE format ?
>
> I developp a Mips embedded application and my target is mips-mips-elf,
> what do youwrite instead of elf ?
Use mips-elf to build binaries, then use objcopy from the binutils suite to
convert your binary into ieee format.
jeff
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: IEEE format error
1999-09-15 2:01 ` Jeffrey A Law
@ 1999-09-30 23:56 ` Jeffrey A Law
1999-10-01 0:00 ` Jeffrey A Law
1 sibling, 0 replies; 15+ messages in thread
From: Jeffrey A Law @ 1999-09-30 23:56 UTC (permalink / raw)
To: Sebastien Cayetanot; +Cc: help-gcc
In message < 37DE0F48.D2786865@dotcom.fr >you write:
> I just would like to know what is the target you use to generate file in
> IEEE format ?
>
> I developp a Mips embedded application and my target is mips-mips-elf,
> what do youwrite instead of elf ?
Use mips-elf to build binaries, then use objcopy from the binutils suite to
convert your binary into ieee format.
jeff
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: IEEE format error
1999-09-15 2:01 ` Jeffrey A Law
1999-09-30 23:56 ` Jeffrey A Law
@ 1999-10-01 0:00 ` Jeffrey A Law
1 sibling, 0 replies; 15+ messages in thread
From: Jeffrey A Law @ 1999-10-01 0:00 UTC (permalink / raw)
To: Sebastien Cayetanot; +Cc: help-gcc
In message < 37DE0F48.D2786865@dotcom.fr >you write:
> I just would like to know what is the target you use to generate file in
> IEEE format ?
>
> I developp a Mips embedded application and my target is mips-mips-elf,
> what do youwrite instead of elf ?
Use mips-elf to build binaries, then use objcopy from the binutils suite to
convert your binary into ieee format.
jeff
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: IEEE format error
1999-09-14 2:07 ` Sebastien Cayetanot
1999-09-14 2:56 ` Andrew Davies
1999-09-15 2:01 ` Jeffrey A Law
@ 1999-09-30 23:56 ` Sebastien Cayetanot
1999-10-01 0:00 ` Sebastien Cayetanot
3 siblings, 0 replies; 15+ messages in thread
From: Sebastien Cayetanot @ 1999-09-30 23:56 UTC (permalink / raw)
To: help-gcc
Hi,
I just would like to know what is the target you use to generate file in IEEE
format ?
I developp a Mips embedded application and my target is mips-mips-elf, what do you
write instead of elf ?
Maybe this idea could help you:
when I compile for a mips processor I must indicate to the compiler that my CPU_TYPE
is a R3000 or R4000 .. .
Thanks
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: IEEE format error
1999-09-14 2:07 ` Sebastien Cayetanot
` (2 preceding siblings ...)
1999-09-30 23:56 ` Sebastien Cayetanot
@ 1999-10-01 0:00 ` Sebastien Cayetanot
3 siblings, 0 replies; 15+ messages in thread
From: Sebastien Cayetanot @ 1999-10-01 0:00 UTC (permalink / raw)
To: help-gcc
Hi,
I just would like to know what is the target you use to generate file in IEEE
format ?
I developp a Mips embedded application and my target is mips-mips-elf, what do you
write instead of elf ?
Maybe this idea could help you:
when I compile for a mips processor I must indicate to the compiler that my CPU_TYPE
is a R3000 or R4000 .. .
Thanks
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: IEEE format error
1999-09-14 1:49 IEEE format error Andrew Davies
1999-09-14 2:07 ` Sebastien Cayetanot
@ 1999-09-15 23:59 ` Hans Peter Jepsen
1999-09-30 23:56 ` Hans Peter Jepsen
1999-10-01 0:00 ` Hans Peter Jepsen
1999-09-30 23:56 ` Andrew Davies
1999-10-01 0:00 ` Andrew Davies
3 siblings, 2 replies; 15+ messages in thread
From: Hans Peter Jepsen @ 1999-09-15 23:59 UTC (permalink / raw)
To: help-gcc
Andrew Davies wrote:
> I'm trying to get the linker to generate a file in IEEE format for use in
> a 68000 embedded application. When I load the file into my simulator (flex
> 68k) it produces this error:
>
> IEEE695: @00000055 File format error (Unknown CPU type)
>
There is an error in binutils-2.9.1 regarding this. I downloaded the binutils-990801
snapshot from sourceware.cygnus.com.
Here it was fixed. So pick up a recent snapshot of binutils.
Regards
Hans Peter
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: IEEE format error
1999-09-15 23:59 ` Hans Peter Jepsen
@ 1999-09-30 23:56 ` Hans Peter Jepsen
1999-10-01 0:00 ` Hans Peter Jepsen
1 sibling, 0 replies; 15+ messages in thread
From: Hans Peter Jepsen @ 1999-09-30 23:56 UTC (permalink / raw)
To: help-gcc
Andrew Davies wrote:
> I'm trying to get the linker to generate a file in IEEE format for use in
> a 68000 embedded application. When I load the file into my simulator (flex
> 68k) it produces this error:
>
> IEEE695: @00000055 File format error (Unknown CPU type)
>
There is an error in binutils-2.9.1 regarding this. I downloaded the binutils-990801
snapshot from sourceware.cygnus.com.
Here it was fixed. So pick up a recent snapshot of binutils.
Regards
Hans Peter
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: IEEE format error
1999-09-15 23:59 ` Hans Peter Jepsen
1999-09-30 23:56 ` Hans Peter Jepsen
@ 1999-10-01 0:00 ` Hans Peter Jepsen
1 sibling, 0 replies; 15+ messages in thread
From: Hans Peter Jepsen @ 1999-10-01 0:00 UTC (permalink / raw)
To: help-gcc
Andrew Davies wrote:
> I'm trying to get the linker to generate a file in IEEE format for use in
> a 68000 embedded application. When I load the file into my simulator (flex
> 68k) it produces this error:
>
> IEEE695: @00000055 File format error (Unknown CPU type)
>
There is an error in binutils-2.9.1 regarding this. I downloaded the binutils-990801
snapshot from sourceware.cygnus.com.
Here it was fixed. So pick up a recent snapshot of binutils.
Regards
Hans Peter
^ permalink raw reply [flat|nested] 15+ messages in thread
* IEEE format error
1999-09-14 1:49 IEEE format error Andrew Davies
1999-09-14 2:07 ` Sebastien Cayetanot
1999-09-15 23:59 ` Hans Peter Jepsen
@ 1999-09-30 23:56 ` Andrew Davies
1999-10-01 0:00 ` Andrew Davies
3 siblings, 0 replies; 15+ messages in thread
From: Andrew Davies @ 1999-09-30 23:56 UTC (permalink / raw)
To: help-gcc
Hi,
I'm trying to get the linker to generate a file in IEEE format for use in
a 68000 embedded application. When I load the file into my simulator (flex
68k) it produces this error:
IEEE695: @00000055 File format error (Unknown CPU type)
I assume this is some missing information that is not being added by the
linker. Dose anybody know how to get it to add this information?
Thanks.
^ permalink raw reply [flat|nested] 15+ messages in thread
* IEEE format error
1999-09-14 1:49 IEEE format error Andrew Davies
` (2 preceding siblings ...)
1999-09-30 23:56 ` Andrew Davies
@ 1999-10-01 0:00 ` Andrew Davies
3 siblings, 0 replies; 15+ messages in thread
From: Andrew Davies @ 1999-10-01 0:00 UTC (permalink / raw)
To: help-gcc
Hi,
I'm trying to get the linker to generate a file in IEEE format for use in
a 68000 embedded application. When I load the file into my simulator (flex
68k) it produces this error:
IEEE695: @00000055 File format error (Unknown CPU type)
I assume this is some missing information that is not being added by the
linker. Dose anybody know how to get it to add this information?
Thanks.
^ permalink raw reply [flat|nested] 15+ messages in thread
end of thread, other threads:[~1999-10-01 0:00 UTC | newest]
Thread overview: 15+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
1999-09-14 1:49 IEEE format error Andrew Davies
1999-09-14 2:07 ` Sebastien Cayetanot
1999-09-14 2:56 ` Andrew Davies
1999-09-30 23:56 ` Andrew Davies
1999-10-01 0:00 ` Andrew Davies
1999-09-15 2:01 ` Jeffrey A Law
1999-09-30 23:56 ` Jeffrey A Law
1999-10-01 0:00 ` Jeffrey A Law
1999-09-30 23:56 ` Sebastien Cayetanot
1999-10-01 0:00 ` Sebastien Cayetanot
1999-09-15 23:59 ` Hans Peter Jepsen
1999-09-30 23:56 ` Hans Peter Jepsen
1999-10-01 0:00 ` Hans Peter Jepsen
1999-09-30 23:56 ` Andrew Davies
1999-10-01 0:00 ` Andrew Davies
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).