* SV: SV: Libtool versioning on FreeBSD
2007-10-25 8:11 ` Ralf Wildenhues
@ 2007-10-25 10:32 ` Jon Theil Nielsen
2007-10-25 22:09 ` Jon Theil Nielsen
2007-10-30 15:29 ` Jon Theil Nielsen
2 siblings, 0 replies; 9+ messages in thread
From: Jon Theil Nielsen @ 2007-10-25 10:32 UTC (permalink / raw)
To: 'Ralf Wildenhues'; +Cc: gcc-help
Hi Ralf,
I think i'll try to make a fresh install of GCC and see if that helps.
Otherwise, I'll try to rename /usr/bin/objformat as supposed. If a still
have problems, I'll write back to you and the list.
Cheers, Jon
> -----Oprindelig meddelelse-----
> Fra: Ralf Wildenhues [mailto:Ralf.Wildenhues@gmx.de]
> Sendt: 25. oktober 2007 07:48
> Til: Jon Theil Nielsen
> Cc: gcc-help@gcc.gnu.org
> Emne: Re: SV: Libtool versioning on FreeBSD
>
> Hello Jon,
>
> * Jon Theil Nielsen wrote on Thu, Oct 25, 2007 at 12:44:06AM CEST:
> >
> > Thanks for your reply. I must admit that I'm not usually a
> programmer,
> > so I'm not sure I understand all of your answer. /usr/bin/objformat
> > does still exist. If I run run it without any parameteres,
> it returns
> > a segfault, while the "test" statment completed without any
> problems or output.
>
> That's the problem then: Libtool assumes that, if
> /usr/bin/objformat is executable, then it can be run and
> produces useful output.
>
> What you need to do is: either move /usr/bin/objformat out of
> the way temporarily, or fix things so that it returns useful
> output. Then recompile whatever port belongs to gnome-libtool.
>
> Sorry I can't be more precise, I'm not a FreeBSD expert at all.
>
> Cheers,
> Ralf
^ permalink raw reply [flat|nested] 9+ messages in thread
* SV: SV: Libtool versioning on FreeBSD
2007-10-25 8:11 ` Ralf Wildenhues
2007-10-25 10:32 ` SV: " Jon Theil Nielsen
@ 2007-10-25 22:09 ` Jon Theil Nielsen
2007-10-30 15:29 ` Jon Theil Nielsen
2 siblings, 0 replies; 9+ messages in thread
From: Jon Theil Nielsen @ 2007-10-25 22:09 UTC (permalink / raw)
To: 'Ralf Wildenhues'; +Cc: gcc-help
Hello again Ralf,
Ironically, I could not reinstall GCC in the first place. But after renaming
/usr/bin/objformat, I could compile again. The problem is not _solved_ since
libtool --config stille reports "version_type=freebsd-". But now I can do
everything I need to do (it is a very old workstation, which will be taken
out of action soon).
Thanks very much for your help.
Cheers, Jon
> -----Oprindelig meddelelse-----
> Fra: Ralf Wildenhues [mailto:Ralf.Wildenhues@gmx.de]
> Sendt: 25. oktober 2007 07:48
> Til: Jon Theil Nielsen
> Cc: gcc-help@gcc.gnu.org
> Emne: Re: SV: Libtool versioning on FreeBSD
>
> Hello Jon,
>
> * Jon Theil Nielsen wrote on Thu, Oct 25, 2007 at 12:44:06AM CEST:
> >
> > Thanks for your reply. I must admit that I'm not usually a
> programmer,
> > so I'm not sure I understand all of your answer. /usr/bin/objformat
> > does still exist. If I run run it without any parameteres,
> it returns
> > a segfault, while the "test" statment completed without any
> problems or output.
>
> That's the problem then: Libtool assumes that, if
> /usr/bin/objformat is executable, then it can be run and
> produces useful output.
>
> What you need to do is: either move /usr/bin/objformat out of
> the way temporarily, or fix things so that it returns useful
> output. Then recompile whatever port belongs to gnome-libtool.
>
> Sorry I can't be more precise, I'm not a FreeBSD expert at all.
>
> Cheers,
> Ralf
^ permalink raw reply [flat|nested] 9+ messages in thread
* SV: SV: Libtool versioning on FreeBSD
2007-10-25 8:11 ` Ralf Wildenhues
2007-10-25 10:32 ` SV: " Jon Theil Nielsen
2007-10-25 22:09 ` Jon Theil Nielsen
@ 2007-10-30 15:29 ` Jon Theil Nielsen
2007-11-01 9:06 ` 'Ralf Wildenhues'
2 siblings, 1 reply; 9+ messages in thread
From: Jon Theil Nielsen @ 2007-10-30 15:29 UTC (permalink / raw)
To: 'Ralf Wildenhues'; +Cc: gcc-help
Hi again,
My problems are not over yet. In the first place, everything seemed to be
okay after removing /usr/bin/objformat from the path. However, during a
portupgrade I had to install the port gccmakedep (for whom the description
is "The gccmakedep program creates dependencies in makefiles using 'gcc
-M'). Now I get the excact same error as usually.
Any (more) ideas?
Cheers,
Jon
> -----Oprindelig meddelelse-----
> Fra: Ralf Wildenhues [mailto:Ralf.Wildenhues@gmx.de]
> Sendt: 25. oktober 2007 07:48
> Til: Jon Theil Nielsen
> Cc: gcc-help@gcc.gnu.org
> Emne: Re: SV: Libtool versioning on FreeBSD
>
> Hello Jon,
>
> * Jon Theil Nielsen wrote on Thu, Oct 25, 2007 at 12:44:06AM CEST:
> >
> > Thanks for your reply. I must admit that I'm not usually a
> programmer,
> > so I'm not sure I understand all of your answer. /usr/bin/objformat
> > does still exist. If I run run it without any parameteres,
> it returns
> > a segfault, while the "test" statment completed without any
> problems or output.
>
> That's the problem then: Libtool assumes that, if
> /usr/bin/objformat is executable, then it can be run and
> produces useful output.
>
> What you need to do is: either move /usr/bin/objformat out of
> the way temporarily, or fix things so that it returns useful
> output. Then recompile whatever port belongs to gnome-libtool.
>
> Sorry I can't be more precise, I'm not a FreeBSD expert at all.
>
> Cheers,
> Ralf
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: SV: SV: Libtool versioning on FreeBSD
2007-10-30 15:29 ` Jon Theil Nielsen
@ 2007-11-01 9:06 ` 'Ralf Wildenhues'
2007-11-01 11:06 ` SV: " Jon Theil Nielsen
0 siblings, 1 reply; 9+ messages in thread
From: 'Ralf Wildenhues' @ 2007-11-01 9:06 UTC (permalink / raw)
To: Jon Theil Nielsen; +Cc: gcc-help
* Jon Theil Nielsen wrote on Tue, Oct 30, 2007 at 09:43:20AM CET:
>
> My problems are not over yet. In the first place, everything seemed to be
> okay after removing /usr/bin/objformat from the path. However, during a
> portupgrade I had to install the port gccmakedep (for whom the description
> is "The gccmakedep program creates dependencies in makefiles using 'gcc
> -M'). Now I get the excact same error as usually.
> Any (more) ideas?
Not really, as I don't know FreeBSD internals well. You could try to
find out why objformat doesn't work and fix that.
Cheers,
Ralf
^ permalink raw reply [flat|nested] 9+ messages in thread
* SV: SV: SV: Libtool versioning on FreeBSD
2007-11-01 9:06 ` 'Ralf Wildenhues'
@ 2007-11-01 11:06 ` Jon Theil Nielsen
0 siblings, 0 replies; 9+ messages in thread
From: Jon Theil Nielsen @ 2007-11-01 11:06 UTC (permalink / raw)
To: 'Ralf Wildenhues'; +Cc: gcc-help
Okay, I will try that. Thanks a lot anyway.
Cheers,
Jon
> -----Oprindelig meddelelse-----
> Fra: 'Ralf Wildenhues' [mailto:Ralf.Wildenhues@gmx.de]
> Sendt: 1. november 2007 10:06
> Til: Jon Theil Nielsen
> Cc: gcc-help@gcc.gnu.org
> Emne: Re: SV: SV: Libtool versioning on FreeBSD
>
> * Jon Theil Nielsen wrote on Tue, Oct 30, 2007 at 09:43:20AM CET:
> >
> > My problems are not over yet. In the first place,
> everything seemed to
> > be okay after removing /usr/bin/objformat from the path. However,
> > during a portupgrade I had to install the port gccmakedep (for whom
> > the description is "The gccmakedep program creates dependencies in
> > makefiles using 'gcc -M'). Now I get the excact same error
> as usually.
> > Any (more) ideas?
>
> Not really, as I don't know FreeBSD internals well. You
> could try to find out why objformat doesn't work and fix that.
>
> Cheers,
> Ralf
^ permalink raw reply [flat|nested] 9+ messages in thread