* Is it possible to build Single GCC Executable for armv5, armv6, armv7-{cortex-xx-{A,R,M}},armv8 etc.? @ 2019-11-10 11:36 Israr Sayed 2019-11-11 11:40 ` Jonathan Wakely 0 siblings, 1 reply; 9+ messages in thread From: Israr Sayed @ 2019-11-10 11:36 UTC (permalink / raw) To: gcc-help Digging into the sources of GCC I noticed in files gcc/config/arm/t-*, There are multiple arm target options. Reading [GCC internal Manual], These are called Target Makefile Fragments, which will be included in main Makefile, like MULTILIB_OPTIONS, MULTILIB_DIRNAMES, MULTILIB_MATCHES, MULTILIB_REQUIRED, MULTILIB_REUSE, MULTILIB_EXTRA_OPTS, MULTILIB_OSDIRNAMES, MULTIARCH_DIRNAME. What I am not able to understand that how to bring it in at the time of configure.Which option to choose? More over is it possible to edit those t-* files as per the requirement and how? Please Help. ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: Is it possible to build Single GCC Executable for armv5, armv6, armv7-{cortex-xx-{A,R,M}},armv8 etc.? 2019-11-10 11:36 Is it possible to build Single GCC Executable for armv5, armv6, armv7-{cortex-xx-{A,R,M}},armv8 etc.? Israr Sayed @ 2019-11-11 11:40 ` Jonathan Wakely [not found] ` <20191111120813.GA9619@hib> 0 siblings, 1 reply; 9+ messages in thread From: Jonathan Wakely @ 2019-11-11 11:40 UTC (permalink / raw) To: Israr Sayed; +Cc: gcc-help On Sun, 10 Nov 2019 at 11:36, Israr Sayed <sd.israr@gmail.com> wrote: > > Digging into the sources of GCC I noticed in files gcc/config/arm/t-*, There are multiple arm target options. > > Reading [GCC internal Manual], These are called Target Makefile Fragments, which will be included in main Makefile, like MULTILIB_OPTIONS, MULTILIB_DIRNAMES, MULTILIB_MATCHES, MULTILIB_REQUIRED, MULTILIB_REUSE, MULTILIB_EXTRA_OPTS, MULTILIB_OSDIRNAMES, MULTIARCH_DIRNAME. > > What I am not able to understand that how to bring it in at the time of configure.Which option to choose? > > More over is it possible to edit those t-* files as per the requirement and how? > Please Help. I don't understand your question. Your email's subject talks about a single GCC executable for multiple ARM variants, which is supported automatically. When you configure GCC for an ARM target you can select the specific processor type using the -march and/or -mcpu options. See the documentation of command-line options in the GCC manual. You don't need to do anything special to use the target makefile fragments, they're used automatically, as needed. ^ permalink raw reply [flat|nested] 9+ messages in thread
[parent not found: <20191111120813.GA9619@hib>]
* Fwd: Is it possible to build Single GCC Executable for armv5, armv6, armv7-{cortex-xx-{A,R,M}},armv8 etc.? [not found] ` <20191111120813.GA9619@hib> @ 2019-11-11 13:33 ` sayed israr 2019-11-11 13:42 ` Richard Earnshaw (lists) 0 siblings, 1 reply; 9+ messages in thread From: sayed israr @ 2019-11-11 13:33 UTC (permalink / raw) To: gcc-help ---------- Forwarded message --------- From: Israr Sayed <sd.israr@gmail.com> Date: Mon, Nov 11, 2019 at 5:38 PM Subject: Re: Is it possible to build Single GCC Executable for armv5, armv6, armv7-{cortex-xx-{A,R,M}},armv8 etc.? To: Jonathan Wakely <jwakely.gcc@gmail.com> I am building GCC from sources.Where i can configure it with 2 ways: (1) --with-arch --with-cpu --with-fpu --with-float options . (2) --with-multilib-list= . In --with-multilib-list, we can configure for various combinations of armv*-*-*. For example, I want to build gcc for with arch = armv7, armv7-m, armv7e-m, with float = hard, softfp, soft. with fpu = fpv, fpv4, fpv4-d16 etc.. whereas if in configure i mention --with-arch --with-fpu --with-float.That will build GCC for those options only. I have a prebuilt arm GCC binary for STM32F controllers, which is built for whole range of armv7-M, armv7e-m along with FPUs. there configure options show --with-multilib-list=rmprofile. rmprofile is the multilib option for configure.Which is exactly what gcc/config/arm/t-rmprofile file is about. I hope i can explain my question better. ------------------------------------------------------ On Mon, Nov 11, 2019 at 11:40:39AM +0000, Jonathan Wakely wrote: > On Sun, 10 Nov 2019 at 11:36, Israr Sayed <sd.israr@gmail.com> wrote: > > > > Digging into the sources of GCC I noticed in files gcc/config/arm/t-*, There are multiple arm target options. > > > > Reading [GCC internal Manual], These are called Target Makefile Fragments, which will be included in main Makefile, like MULTILIB_OPTIONS, MULTILIB_DIRNAMES, MULTILIB_MATCHES, MULTILIB_REQUIRED, MULTILIB_REUSE, MULTILIB_EXTRA_OPTS, MULTILIB_OSDIRNAMES, MULTIARCH_DIRNAME. > > > > What I am not able to understand that how to bring it in at the time of configure.Which option to choose? > > > > More over is it possible to edit those t-* files as per the requirement and how? > > Please Help. > > I don't understand your question. Your email's subject talks about a > single GCC executable for multiple ARM variants, which is supported > automatically. When you configure GCC for an ARM target you can select > the specific processor type using the -march and/or -mcpu options. See > the documentation of command-line options in the GCC manual. > > You don't need to do anything special to use the target makefile > fragments, they're used automatically, as needed. ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: Fwd: Is it possible to build Single GCC Executable for armv5, armv6, armv7-{cortex-xx-{A,R,M}},armv8 etc.? 2019-11-11 13:33 ` Fwd: " sayed israr @ 2019-11-11 13:42 ` Richard Earnshaw (lists) 2019-11-11 17:50 ` Israr Sayed 0 siblings, 1 reply; 9+ messages in thread From: Richard Earnshaw (lists) @ 2019-11-11 13:42 UTC (permalink / raw) To: sayed israr, gcc-help On 11/11/2019 13:33, sayed israr wrote: > ---------- Forwarded message --------- > From: Israr Sayed <sd.israr@gmail.com> > Date: Mon, Nov 11, 2019 at 5:38 PM > Subject: Re: Is it possible to build Single GCC Executable for armv5, > armv6, armv7-{cortex-xx-{A,R,M}},armv8 etc.? > To: Jonathan Wakely <jwakely.gcc@gmail.com> > > > I am building GCC from sources.Where i can configure it with 2 ways: > (1) --with-arch --with-cpu --with-fpu --with-float options . > (2) --with-multilib-list= . > In --with-multilib-list, we can configure for various combinations of > armv*-*-*. > For example, I want to build gcc for with arch = armv7, armv7-m, armv7e-m, > with float = hard, softfp, soft. > with fpu = fpv, fpv4, fpv4-d16 etc.. > whereas if in configure i mention --with-arch --with-fpu --with-float.That > will build GCC for those options only. > I have a prebuilt arm GCC binary for STM32F controllers, which is built for > whole range of armv7-M, armv7e-m along with FPUs. > there configure options show --with-multilib-list=rmprofile. > rmprofile is the multilib option for configure.Which is exactly what > gcc/config/arm/t-rmprofile file is about. > I hope i can explain my question better. You can configure the compiler with --with-multlib-list=xxx where xxx is any of "aprofile", "rmprofile" and "aprofile,rmprofile" If you do this, DO NOT specify any of --with-fpu, --with-cpu, --with-tune or --with-arch. Be warned, the full set of multilibs is LARGE. It requires a fast machine and/or a lot of time to build them all. You can, of course, edit any of the files - the GPL gives you that right, but if you do so, you're most likely on your own. The multilib configurations are complex and rely heavily on GNU Makefile trickery to express all the required combinations. R. > ------------------------------------------------------ > > On Mon, Nov 11, 2019 at 11:40:39AM +0000, Jonathan Wakely wrote: >> On Sun, 10 Nov 2019 at 11:36, Israr Sayed <sd.israr@gmail.com> wrote: >>> >>> Digging into the sources of GCC I noticed in files gcc/config/arm/t-*, > There are multiple arm target options. >>> >>> Reading [GCC internal Manual], These are called Target Makefile > Fragments, which will be included in main Makefile, like MULTILIB_OPTIONS, > MULTILIB_DIRNAMES, MULTILIB_MATCHES, MULTILIB_REQUIRED, MULTILIB_REUSE, > MULTILIB_EXTRA_OPTS, MULTILIB_OSDIRNAMES, MULTIARCH_DIRNAME. >>> >>> What I am not able to understand that how to bring it in at the time of > configure.Which option to choose? >>> >>> More over is it possible to edit those t-* files as per the requirement > and how? >>> Please Help. >> >> I don't understand your question. Your email's subject talks about a >> single GCC executable for multiple ARM variants, which is supported >> automatically. When you configure GCC for an ARM target you can select >> the specific processor type using the -march and/or -mcpu options. See >> the documentation of command-line options in the GCC manual. >> >> You don't need to do anything special to use the target makefile >> fragments, they're used automatically, as needed. ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: Fwd: Is it possible to build Single GCC Executable for armv5, armv6, armv7-{cortex-xx-{A,R,M}},armv8 etc.? 2019-11-11 13:42 ` Richard Earnshaw (lists) @ 2019-11-11 17:50 ` Israr Sayed 2019-11-12 10:01 ` Richard Earnshaw (lists) 0 siblings, 1 reply; 9+ messages in thread From: Israr Sayed @ 2019-11-11 17:50 UTC (permalink / raw) To: Richard Earnshaw (lists); +Cc: gcc-help As per your instructions i tried to build the GCC.I got the following errors: /mnt/clfs/sources/gcc-build/./gcc/xgcc -B/mnt/clfs/sources/gcc-build/./gcc/ -B/mnt/clfs/cross-tools/arm-linux-musleabihf/bin/ -B/mnt/clfs/cross-tools/arm-linux-musleabihf/lib/ -isystem /mnt/clfs/cross-tools/arm-linux-musleabihf/include -isystem /mnt/clfs/cross-tools/arm-linux-musleabihf/sys-include -g -O2 -mthumb -march=armv6s-m -mfloat-abi=soft -O2 -g -O2 -DIN_GCC -DCROSS_DIRECTORY_STRUCTURE -W -Wall -Wno-narrowing -Wwrite-strings -Wcast-qual -Wstrict-prototypes -Wmissing-prototypes -Wold-style-definition -isystem ./include -fPIC -fno-inline -g -DIN_LIBGCC2 -fbuilding-libgcc -fno-stack-protector -Dinhibit_libc -fPIC -fno-inline -I. -I. -I../../../../.././gcc -I../../../../../../gcc-9.2.0/libgcc -I../../../../../../gcc-9.2.0/libgcc/. -I../../../../../../gcc-9.2.0/libgcc/../gcc -I../../../../../../gcc-9.2.0/libgcc/../include -DHAVE_CC_TLS -o _dvmd_lnx_s.o -MT _dvmd_lnx_s.o -MD -MP -MF _dvmd_lnx_s.dep -DSHARED -DL_dvmd_lnx -xassembler-with-cpp -c ../../../../../../gcc-9.2.0/libgcc/config/arm/lib1funcs.S ../../../../../../gcc-9.2.0/libgcc/config/arm/lib1funcs.S: Assembler messages: ../../../../../../gcc-9.2.0/libgcc/config/arm/lib1funcs.S:1482: Error: bad instruction `arm_func_start aeabi_idiv0' ../../../../../../gcc-9.2.0/libgcc/config/arm/lib1funcs.S:1483: Error: bad instruction `arm_func_start aeabi_ldiv0' ../../../../../../gcc-9.2.0/libgcc/config/arm/lib1funcs.S:1484: Error: selected processor does not support `stmfd sp!,{r1,lr}' in Thumb mode ../../../../../../gcc-9.2.0/libgcc/config/arm/lib1funcs.S:1495: Error: lo register required -- `ldmia sp!,{r1,pc}' ../../../../../../gcc-9.2.0/libgcc/config/arm/lib1funcs.S:1485: Error: invalid operands (.text and *UND* sections) for `-' ../../../../../../gcc-9.2.0/libgcc/config/arm/lib1funcs.S:1479: Error: can't resolve `.text' {.text section} - `__aeabi_ldiv0' {*UND* section} /tmp/cc0Si52Z.s: Error: .size expression for __aeabi_ldiv0 does not evaluate to a constant /tmp/cc0Si52Z.s: Error: .size expression for __aeabi_idiv0 does not evaluate to a constant make[3]: *** [Makefile:488: _dvmd_lnx_s.o] Error 1 make[3]: Leaving directory '/mnt/clfs/sources/gcc-build/arm-linux-musleabihf/thumb/v6-m/nofp/libgcc' make[2]: *** [Makefile:1210: multi-do] Error 1 make[2]: Leaving directory '/mnt/clfs/sources/gcc-build/arm-linux-musleabihf/libgcc' make[1]: *** [Makefile:127: all-multi] Error 2 make[1]: Leaving directory '/mnt/clfs/sources/gcc-build/arm-linux-musleabihf/libgcc' make: *** [Makefile:12499: all-target-libgcc] Error 2 ---------------------------------------------------------- Config.log: This file contains any messages produced by compilers while running configure, to aid debugging if configure makes a mistake. It was created by configure, which was generated by GNU Autoconf 2.69. Invocation command line was $ ../gcc-9.2.0/configure --prefix=/mnt/clfs/cross-tools --build=x86_64-cross-linux-gnu --host=x86_64-cross-linux-gnu --target=arm-linux-musleabihf --with-sysroot=/mnt/clfs/cross-tools/arm-linux-musleabihf --disable-nls --disable-shared --without-headers --with-newlib --disable-decimal-float --disable-libgomp --disable-libmudflap --disable-libssp --disable-libatomic --disable-libquadmath --disable-threads --enable-languages=c --enable-multilib --with-mpfr-include=/mnt/clfs/sources/gcc-build/../gcc-9.2.0/mpfr/src --with-mpfr-lib=/mnt/clfs/sources/gcc-build/mpfr/src/.libs --with-multilib-list=rmprofile ## --------- ## ## Platform. ## ## --------- ## hostname = hib uname -m = x86_64 uname -r = 5.3.0-19-generic uname -s = Linux uname -v = #20-Ubuntu SMP Fri Oct 18 09:04:39 UTC 2019 /usr/bin/uname -p = x86_64 /bin/uname -X = unknown /bin/arch = x86_64 /usr/bin/arch -k = unknown /usr/convex/getsysinfo = unknown /usr/bin/hostinfo = unknown /bin/machine = unknown /usr/bin/oslevel = unknown /bin/universe = unknown PATH: /mnt/clfs/cross-tools/bin PATH: /bin PATH: /usr/bin ## ----------- ## ## Core tests. ## ## ----------- ## configure:2348: checking build system type configure:2362: result: x86_64-cross-linux-gnu configure:2409: checking host system type configure:2422: result: x86_64-cross-linux-gnu configure:2442: checking target system type configure:2455: result: arm-unknown-linux-musleabihf configure:2509: checking for a BSD-compatible install configure:2577: result: /bin/install -c configure:2588: checking whether ln works configure:2610: result: yes configure:2614: checking whether ln -s works configure:2618: result: yes configure:2625: checking for a sed that does not truncate output configure:2689: result: /bin/sed configure:2698: checking for gawk configure:2714: found /bin/gawk configure:2725: result: gawk configure:3257: checking for libitm support configure:3267: result: yes configure:3276: checking for libsanitizer support configure:3286: result: yes configure:3295: checking for libvtv support configure:3305: result: yes configure:3315: checking for libhsail-rt support configure:3321: result: no configure:3406: checking for libphobos support configure:3416: result: yes configure:4036: checking for x86_64-cross-linux-gnu-gcc configure:4066: result: no configure:4076: checking for gcc configure:4092: found /bin/gcc configure:4103: result: gcc configure:4332: checking for C compiler version configure:4341: gcc --version >&5 gcc (Ubuntu 9.2.1-9ubuntu2) 9.2.1 20191008 Copyright (C) 2019 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. configure:4352: $? = 0 configure:4341: gcc -v >&5 Using built-in specs. COLLECT_GCC=gcc COLLECT_LTO_WRAPPER=/usr/lib/gcc/x86_64-linux-gnu/9/lto-wrapper OFFLOAD_TARGET_NAMES=nvptx-none:hsa OFFLOAD_TARGET_DEFAULT=1 Target: x86_64-linux-gnu Configured with: ../src/configure -v --with-pkgversion='Ubuntu 9.2.1-9ubuntu2' --with-bugurl=file:///usr/share/doc/gcc-9/README.Bugs --enable-languages=c,ada,c++,go,brig,d,fortran,objc,obj-c++,gm2 --prefix=/usr --with-gcc-major-version-only --program-suffix=-9 --program-prefix=x86_64-linux-gnu- --enable-shared --enable-linker-build-id --libexecdir=/usr/lib --without-included-gettext --enable-threads=posix --libdir=/usr/lib --enable-nls --enable-bootstrap --enable-clocale=gnu --enable-libstdcxx-debug --enable-libstdcxx-time=yes --with-default-libstdcxx-abi=new --enable-gnu-unique-object --disable-vtable-verify --enable-plugin --enable-default-pie --with-system-zlib --with-target-system-zlib=auto --enable-multiarch --disable-werror --with-arch-32=i686 --with-abi=m64 --with-multilib-list=m32,m64,mx32 --enable-multilib --with-tune=generic --enable-offload-targets=nvptx-none,hsa --without-cuda-driver --enable-checking=release --build=x86_64-linux-gnu --host=x86_64-linux-gnu --target=x86_64-linux-gnu Thread model: posix gcc version 9.2.1 20191008 (Ubuntu 9.2.1-9ubuntu2) configure:4352: $? = 0 configure:4341: gcc -V >&5 gcc: error: unrecognized command line option '-V' gcc: fatal error: no input files compilation terminated. configure:4352: $? = 1 configure:4341: gcc -qversion >&5 gcc: error: unrecognized command line option '-qversion'; did you mean '--version'? gcc: fatal error: no input files compilation terminated. configure:4352: $? = 1 configure:4372: checking whether the C compiler works configure:4394: gcc conftest.c >&5 configure:4398: $? = 0 configure:4446: result: yes configure:4449: checking for C compiler default output file name configure:4451: result: a.out configure:4457: checking for suffix of executables configure:4464: gcc -o conftest conftest.c >&5 configure:4468: $? = 0 configure:4490: result: configure:4512: checking whether we are cross compiling configure:4520: gcc -o conftest conftest.c >&5 configure:4524: $? = 0 configure:4531: ./conftest configure:4535: $? = 0 configure:4523: result: no configure:4528: checking for suffix of object files configure:4550: gcc -c conftest.c >&5 configure:4554: $? = 0 configure:4575: result: o configure:4579: checking whether we are using the GNU C compiler configure:4598: gcc -c conftest.c >&5 configure:4598: $? = 0 configure:4607: result: yes configure:4616: checking whether gcc accepts -g configure:4636: gcc -c -g conftest.c >&5 configure:4636: $? = 0 configure:4677: result: yes configure:4694: checking for gcc option to accept ISO C89 configure:4757: gcc -c -g -O2 conftest.c >&5 configure:4757: $? = 0 configure:4770: result: none needed configure:4804: checking for x86_64-cross-linux-gnu-g++ configure:4834: result: no configure:4804: checking for x86_64-cross-linux-gnu-c++ configure:4834: result: no configure:4804: checking for x86_64-cross-linux-gnu-gpp configure:4834: result: no configure:4804: checking for x86_64-cross-linux-gnu-aCC configure:4834: result: no configure:4804: checking for x86_64-cross-linux-gnu-CC configure:4834: result: no configure:4804: checking for x86_64-cross-linux-gnu-cxx configure:4834: result: no configure:4804: checking for x86_64-cross-linux-gnu-cc++ configure:4834: result: no configure:4804: checking for x86_64-cross-linux-gnu-cl.exe configure:4834: result: no configure:4804: checking for x86_64-cross-linux-gnu-FCC configure:4834: result: no configure:4804: checking for x86_64-cross-linux-gnu-KCC configure:4834: result: no configure:4804: checking for x86_64-cross-linux-gnu-RCC configure:4834: result: no configure:4804: checking for x86_64-cross-linux-gnu-xlC_r configure:4834: result: no configure:4804: checking for x86_64-cross-linux-gnu-xlC configure:4834: result: no configure:4848: checking for g++ configure:4864: found /bin/g++ configure:4875: result: g++ configure:4902: checking for C++ compiler version configure:4911: g++ --version >&5 g++ (Ubuntu 9.2.1-9ubuntu2) 9.2.1 20191008 Copyright (C) 2019 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. configure:4922: $? = 0 configure:4911: g++ -v >&5 Using built-in specs. COLLECT_GCC=g++ COLLECT_LTO_WRAPPER=/usr/lib/gcc/x86_64-linux-gnu/9/lto-wrapper OFFLOAD_TARGET_NAMES=nvptx-none:hsa OFFLOAD_TARGET_DEFAULT=1 Target: x86_64-linux-gnu Configured with: ../src/configure -v --with-pkgversion='Ubuntu 9.2.1-9ubuntu2' --with-bugurl=file:///usr/share/doc/gcc-9/README.Bugs --enable-languages=c,ada,c++,go,brig,d,fortran,objc,obj-c++,gm2 --prefix=/usr --with-gcc-major-version-only --program-suffix=-9 --program-prefix=x86_64-linux-gnu- --enable-shared --enable-linker-build-id --libexecdir=/usr/lib --without-included-gettext --enable-threads=posix --libdir=/usr/lib --enable-nls --enable-bootstrap --enable-clocale=gnu --enable-libstdcxx-debug --enable-libstdcxx-time=yes --with-default-libstdcxx-abi=new --enable-gnu-unique-object --disable-vtable-verify --enable-plugin --enable-default-pie --with-system-zlib --with-target-system-zlib=auto --enable-multiarch --disable-werror --with-arch-32=i686 --with-abi=m64 --with-multilib-list=m32,m64,mx32 --enable-multilib --with-tune=generic --enable-offload-targets=nvptx-none,hsa --without-cuda-driver --enable-checking=release --build=x86_64-linux-gnu --host=x86_64-linux-gnu --target=x86_64-linux-gnu Thread model: posix gcc version 9.2.1 20191008 (Ubuntu 9.2.1-9ubuntu2) configure:4922: $? = 0 configure:4911: g++ -V >&5 g++: error: unrecognized command line option '-V' g++: fatal error: no input files compilation terminated. configure:4922: $? = 1 configure:4911: g++ -qversion >&5 g++: error: unrecognized command line option '-qversion'; did you mean '--version'? g++: fatal error: no input files compilation terminated. configure:4922: $? = 1 configure:4926: checking whether we are using the GNU C++ compiler configure:4945: g++ -c conftest.cpp >&5 configure:4945: $? = 0 configure:4954: result: yes configure:4963: checking whether g++ accepts -g configure:4983: g++ -c -g conftest.cpp >&5 configure:4983: $? = 0 configure:5024: result: yes configure:5073: checking whether g++ accepts -static-libstdc++ -static-libgcc configure:5090: g++ -o conftest -g -O2 -static-libstdc++ -static-libgcc conftest.cpp >&5 configure:5090: $? = 0 configure:5091: result: yes configure:5115: checking for x86_64-cross-linux-gnu-gnatbind configure:5145: result: no configure:5155: checking for gnatbind configure:5185: result: no configure:5207: checking for x86_64-cross-linux-gnu-gnatmake configure:5237: result: no configure:5247: checking for gnatmake configure:5277: result: no configure:5296: checking whether compiler driver understands Ada configure:5319: result: no configure:5328: checking how to compare bootstrapped objects configure:5353: result: cmp --ignore-initial=16 $$f1 $$f2 configure:5413: checking for objdir configure:5428: result: .libs configure:5976: checking for isl 0.15 or later configure:5989: gcc -o conftest -g -O2 -I$$r/$(HOST_SUBDIR)/gmp -I$$s/gmp -I/mnt/clfs/sources/gcc-build/../gcc-9.2.0/mpfr/src -I$$s/mpc/src -lisl -L$$r/$(HOST_SUBDIR)/gmp/.libs -L/mnt/clfs/sources/gcc-build/mpfr/src/.libs -L$$r/$(HOST_SUBDIR)/mpc/src/.libs -lmpc -lmpfr -lgmp conftest.c -lisl -lgmp >&5 conftest.c:10:10: fatal error: isl/schedule.h: No such file or directory 10 | #include <isl/schedule.h> | ^~~~~~~~~~~~~~~~ compilation terminated. configure:5989: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "" | #define PACKAGE_TARNAME "" | #define PACKAGE_VERSION "" | #define PACKAGE_STRING "" | #define PACKAGE_BUGREPORT "" | #define PACKAGE_URL "" | #define LT_OBJDIR ".libs/" | /* end confdefs.h. */ | #include <isl/schedule.h> | int | main () | { | isl_options_set_schedule_serialize_sccs (NULL, 0); | ; | return 0; | } configure:5996: result: no configure:6000: result: required isl version is 0.15 or later configure:7093: checking for default BUILD_CONFIG configure:7125: result: configure:7130: checking for --enable-vtable-verify configure:7143: result: no configure:7744: checking for bison configure:7760: found /bin/bison configure:7771: result: bison -y configure:7791: checking for bison configure:7807: found /bin/bison configure:7818: result: bison configure:7838: checking for gm4 configure:7868: result: no configure:7838: checking for gnum4 configure:7868: result: no configure:7838: checking for m4 configure:7854: found /bin/m4 configure:7865: result: m4 configure:7885: checking for flex configure:7901: found /bin/flex configure:7912: result: flex configure:7933: checking for flex configure:7949: found /bin/flex configure:7960: result: flex configure:7980: checking for makeinfo configure:7996: found /bin/makeinfo configure:8007: result: makeinfo configure:8041: checking for expect configure:8057: found /bin/expect configure:8068: result: expect configure:8090: checking for runtest configure:8120: result: no configure:8196: checking for x86_64-cross-linux-gnu-ar configure:8226: result: no configure:8235: checking for ar configure:8251: found /bin/ar configure:8262: result: ar configure:8337: checking for x86_64-cross-linux-gnu-as configure:8367: result: no configure:8376: checking for as configure:8392: found /bin/as configure:8403: result: as configure:8478: checking for x86_64-cross-linux-gnu-dlltool configure:8508: result: no configure:8517: checking for dlltool configure:8547: result: no configure:8619: checking for x86_64-cross-linux-gnu-ld configure:8649: result: no configure:8658: checking for ld configure:8674: found /bin/ld configure:8685: result: ld configure:8760: checking for x86_64-cross-linux-gnu-lipo configure:8790: result: no configure:8799: checking for lipo configure:8829: result: no configure:8901: checking for x86_64-cross-linux-gnu-nm configure:8931: result: no configure:8940: checking for nm configure:8956: found /bin/nm configure:8967: result: nm configure:9042: checking for x86_64-cross-linux-gnu-ranlib configure:9072: result: no configure:9081: checking for ranlib configure:9097: found /bin/ranlib configure:9108: result: ranlib configure:9178: checking for x86_64-cross-linux-gnu-strip configure:9208: result: no configure:9217: checking for strip configure:9233: found /bin/strip configure:9244: result: strip configure:9314: checking for x86_64-cross-linux-gnu-windres configure:9344: result: no configure:9353: checking for windres configure:9383: result: no configure:9455: checking for x86_64-cross-linux-gnu-windmc configure:9485: result: no configure:9494: checking for windmc configure:9524: result: no configure:9596: checking for x86_64-cross-linux-gnu-objcopy configure:9626: result: no configure:9635: checking for objcopy configure:9651: found /bin/objcopy configure:9662: result: objcopy configure:9737: checking for x86_64-cross-linux-gnu-objdump configure:9767: result: no configure:9776: checking for objdump configure:9792: found /bin/objdump configure:9803: result: objdump configure:9878: checking for x86_64-cross-linux-gnu-otool configure:9908: result: no configure:9917: checking for otool configure:9947: result: no configure:10019: checking for x86_64-cross-linux-gnu-readelf configure:10049: result: no configure:10058: checking for readelf configure:10074: found /bin/readelf configure:10085: result: readelf configure:10199: checking for arm-linux-musleabihf-cc configure:10229: result: no configure:10199: checking for arm-linux-musleabihf-gcc configure:10229: result: no configure:10360: checking for arm-linux-musleabihf-c++ configure:10390: result: no configure:10360: checking for arm-linux-musleabihf-g++ configure:10390: result: no configure:10360: checking for arm-linux-musleabihf-cxx configure:10390: result: no configure:10360: checking for arm-linux-musleabihf-gxx configure:10390: result: no configure:10521: checking for arm-linux-musleabihf-gcc configure:10551: result: no configure:10677: checking for arm-linux-musleabihf-gfortran configure:10707: result: no configure:10838: checking for arm-linux-musleabihf-gccgo configure:10868: result: no configure:10999: checking for arm-linux-musleabihf-gdc configure:11029: result: no configure:11129: checking for ar configure:11147: found /mnt/clfs/cross-tools/arm-linux-musleabihf/bin/ar configure:11159: result: /mnt/clfs/cross-tools/arm-linux-musleabihf/bin/ar configure:11359: checking for as configure:11377: found /mnt/clfs/cross-tools/arm-linux-musleabihf/bin/as configure:11389: result: /mnt/clfs/cross-tools/arm-linux-musleabihf/bin/as configure:11589: checking for dlltool configure:11622: result: no configure:11700: checking for arm-linux-musleabihf-dlltool configure:11730: result: no configure:11819: checking for ld configure:11837: found /mnt/clfs/cross-tools/arm-linux-musleabihf/bin/ld configure:11849: result: /mnt/clfs/cross-tools/arm-linux-musleabihf/bin/ld configure:12049: checking for lipo configure:12082: result: no configure:12160: checking for arm-linux-musleabihf-lipo configure:12190: result: no configure:12279: checking for nm configure:12297: found /mnt/clfs/cross-tools/arm-linux-musleabihf/bin/nm configure:12309: result: /mnt/clfs/cross-tools/arm-linux-musleabihf/bin/nm configure:12509: checking for objcopy configure:12527: found /mnt/clfs/cross-tools/arm-linux-musleabihf/bin/objcopy configure:12539: result: /mnt/clfs/cross-tools/arm-linux-musleabihf/bin/objcopy configure:12739: checking for objdump configure:12757: found /mnt/clfs/cross-tools/arm-linux-musleabihf/bin/objdump configure:12769: result: /mnt/clfs/cross-tools/arm-linux-musleabihf/bin/objdump configure:12969: checking for otool configure:13002: result: no configure:13080: checking for arm-linux-musleabihf-otool configure:13110: result: no configure:13199: checking for ranlib configure:13217: found /mnt/clfs/cross-tools/arm-linux-musleabihf/bin/ranlib configure:13229: result: /mnt/clfs/cross-tools/arm-linux-musleabihf/bin/ranlib configure:13429: checking for readelf configure:13447: found /mnt/clfs/cross-tools/arm-linux-musleabihf/bin/readelf configure:13459: result: /mnt/clfs/cross-tools/arm-linux-musleabihf/bin/readelf configure:13659: checking for strip configure:13677: found /mnt/clfs/cross-tools/arm-linux-musleabihf/bin/strip configure:13689: result: /mnt/clfs/cross-tools/arm-linux-musleabihf/bin/strip configure:13889: checking for windres configure:13922: result: no configure:14000: checking for arm-linux-musleabihf-windres configure:14030: result: no configure:14119: checking for windmc configure:14152: result: no configure:14230: checking for arm-linux-musleabihf-windmc configure:14260: result: no configure:14327: checking where to find the target ar configure:14355: result: pre-installed in /mnt/clfs/cross-tools/arm-linux-musleabihf/bin configure:14369: checking where to find the target as configure:14397: result: pre-installed in /mnt/clfs/cross-tools/arm-linux-musleabihf/bin configure:14411: checking where to find the target cc configure:14434: result: just compiled configure:14453: checking where to find the target c++ configure:14493: result: pre-installed configure:14498: checking where to find the target c++ for libstdc++ configure:14538: result: pre-installed configure:14543: checking where to find the target dlltool configure:14580: result: pre-installed configure:14585: checking where to find the target gcc configure:14608: result: just compiled configure:14627: checking where to find the target gfortran configure:14667: result: pre-installed configure:14672: checking where to find the target gccgo configure:14712: result: pre-installed configure:14717: checking where to find the target gdc configure:14757: result: pre-installed configure:14762: checking where to find the target ld configure:14790: result: pre-installed in /mnt/clfs/cross-tools/arm-linux-musleabihf/bin configure:14804: checking where to find the target lipo configure:14830: result: pre-installed configure:14835: checking where to find the target nm configure:14863: result: pre-installed in /mnt/clfs/cross-tools/arm-linux-musleabihf/bin configure:14877: checking where to find the target objcopy configure:14905: result: pre-installed in /mnt/clfs/cross-tools/arm-linux-musleabihf/bin configure:14919: checking where to find the target objdump configure:14947: result: pre-installed in /mnt/clfs/cross-tools/arm-linux-musleabihf/bin configure:14961: checking where to find the target otool configure:14987: result: pre-installed configure:14992: checking where to find the target ranlib configure:15020: result: pre-installed in /mnt/clfs/cross-tools/arm-linux-musleabihf/bin configure:15034: checking where to find the target readelf configure:15062: result: pre-installed in /mnt/clfs/cross-tools/arm-linux-musleabihf/bin configure:15076: checking where to find the target strip configure:15104: result: pre-installed in /mnt/clfs/cross-tools/arm-linux-musleabihf/bin configure:15118: checking where to find the target windres configure:15155: result: pre-installed configure:15160: checking where to find the target windmc configure:15197: result: pre-installed configure:15230: checking whether to enable maintainer-specific portions of Makefiles configure:15239: result: no configure:15474: creating ./config.status ## ---------------------- ## ## Running config.status. ## ## ---------------------- ## This file was extended by config.status, which was generated by GNU Autoconf 2.69. Invocation command line was CONFIG_FILES = CONFIG_HEADERS = CONFIG_LINKS = CONFIG_COMMANDS = $ ./config.status on hib config.status:1016: creating Makefile ## ---------------- ## ## Cache variables. ## ## ---------------- ## ac_cv_build=x86_64-cross-linux-gnu ac_cv_c_compiler_gnu=yes ac_cv_cxx_compiler_gnu=yes ac_cv_env_AR_FOR_TARGET_set= ac_cv_env_AR_FOR_TARGET_value= ac_cv_env_AR_set= ac_cv_env_AR_value= ac_cv_env_AS_FOR_TARGET_set= ac_cv_env_AS_FOR_TARGET_value= ac_cv_env_AS_set= ac_cv_env_AS_value= ac_cv_env_CCC_set= ac_cv_env_CCC_value= ac_cv_env_CC_FOR_TARGET_set= ac_cv_env_CC_FOR_TARGET_value= ac_cv_env_CC_set= ac_cv_env_CC_value= ac_cv_env_CFLAGS_set= ac_cv_env_CFLAGS_value= ac_cv_env_CPPFLAGS_set= ac_cv_env_CPPFLAGS_value= ac_cv_env_CXXFLAGS_set= ac_cv_env_CXXFLAGS_value= ac_cv_env_CXX_FOR_TARGET_set= ac_cv_env_CXX_FOR_TARGET_value= ac_cv_env_CXX_set= ac_cv_env_CXX_value= ac_cv_env_DLLTOOL_FOR_TARGET_set= ac_cv_env_DLLTOOL_FOR_TARGET_value= ac_cv_env_DLLTOOL_set= ac_cv_env_DLLTOOL_value= ac_cv_env_GCC_FOR_TARGET_set= ac_cv_env_GCC_FOR_TARGET_value= ac_cv_env_GDC_FOR_TARGET_set= ac_cv_env_GDC_FOR_TARGET_value= ac_cv_env_GFORTRAN_FOR_TARGET_set= ac_cv_env_GFORTRAN_FOR_TARGET_value= ac_cv_env_GOC_FOR_TARGET_set= ac_cv_env_GOC_FOR_TARGET_value= ac_cv_env_LDFLAGS_set= ac_cv_env_LDFLAGS_value= ac_cv_env_LD_FOR_TARGET_set= ac_cv_env_LD_FOR_TARGET_value= ac_cv_env_LD_set= ac_cv_env_LD_value= ac_cv_env_LIBS_set= ac_cv_env_LIBS_value= ac_cv_env_LIPO_FOR_TARGET_set= ac_cv_env_LIPO_FOR_TARGET_value= ac_cv_env_LIPO_set= ac_cv_env_LIPO_value= ac_cv_env_NM_FOR_TARGET_set= ac_cv_env_NM_FOR_TARGET_value= ac_cv_env_NM_set= ac_cv_env_NM_value= ac_cv_env_OBJCOPY_FOR_TARGET_set= ac_cv_env_OBJCOPY_FOR_TARGET_value= ac_cv_env_OBJCOPY_set= ac_cv_env_OBJCOPY_value= ac_cv_env_OBJDUMP_FOR_TARGET_set= ac_cv_env_OBJDUMP_FOR_TARGET_value= ac_cv_env_OBJDUMP_set= ac_cv_env_OBJDUMP_value= ac_cv_env_OTOOL_FOR_TARGET_set= ac_cv_env_OTOOL_FOR_TARGET_value= ac_cv_env_OTOOL_set= ac_cv_env_OTOOL_value= ac_cv_env_RANLIB_FOR_TARGET_set= ac_cv_env_RANLIB_FOR_TARGET_value= ac_cv_env_RANLIB_set= ac_cv_env_RANLIB_value= ac_cv_env_READELF_FOR_TARGET_set= ac_cv_env_READELF_FOR_TARGET_value= ac_cv_env_READELF_set= ac_cv_env_READELF_value= ac_cv_env_STRIP_FOR_TARGET_set= ac_cv_env_STRIP_FOR_TARGET_value= ac_cv_env_STRIP_set= ac_cv_env_STRIP_value= ac_cv_env_WINDMC_FOR_TARGET_set= ac_cv_env_WINDMC_FOR_TARGET_value= ac_cv_env_WINDMC_set= ac_cv_env_WINDMC_value= ac_cv_env_WINDRES_FOR_TARGET_set= ac_cv_env_WINDRES_FOR_TARGET_value= ac_cv_env_WINDRES_set= ac_cv_env_WINDRES_value= ac_cv_env_build_alias_set=set ac_cv_env_build_alias_value=x86_64-cross-linux-gnu ac_cv_env_build_configargs_set= ac_cv_env_build_configargs_value= ac_cv_env_host_alias_set=set ac_cv_env_host_alias_value=x86_64-cross-linux-gnu ac_cv_env_host_configargs_set= ac_cv_env_host_configargs_value= ac_cv_env_target_alias_set=set ac_cv_env_target_alias_value=arm-linux-musleabihf ac_cv_env_target_configargs_set= ac_cv_env_target_configargs_value= ac_cv_host=x86_64-cross-linux-gnu ac_cv_objext=o ac_cv_path_AR_FOR_TARGET=/mnt/clfs/cross-tools/arm-linux-musleabihf/bin/ar ac_cv_path_AS_FOR_TARGET=/mnt/clfs/cross-tools/arm-linux-musleabihf/bin/as ac_cv_path_LD_FOR_TARGET=/mnt/clfs/cross-tools/arm-linux-musleabihf/bin/ld ac_cv_path_NM_FOR_TARGET=/mnt/clfs/cross-tools/arm-linux-musleabihf/bin/nm ac_cv_path_OBJCOPY_FOR_TARGET=/mnt/clfs/cross-tools/arm-linux-musleabihf/bin/objcopy ac_cv_path_OBJDUMP_FOR_TARGET=/mnt/clfs/cross-tools/arm-linux-musleabihf/bin/objdump ac_cv_path_RANLIB_FOR_TARGET=/mnt/clfs/cross-tools/arm-linux-musleabihf/bin/ranlib ac_cv_path_READELF_FOR_TARGET=/mnt/clfs/cross-tools/arm-linux-musleabihf/bin/readelf ac_cv_path_SED=/bin/sed ac_cv_path_STRIP_FOR_TARGET=/mnt/clfs/cross-tools/arm-linux-musleabihf/bin/strip ac_cv_path_install='/bin/install -c' ac_cv_prog_AR=ar ac_cv_prog_AS=as ac_cv_prog_AWK=gawk ac_cv_prog_BISON=bison ac_cv_prog_EXPECT=expect ac_cv_prog_FLEX=flex ac_cv_prog_LD=ld ac_cv_prog_LEX=flex ac_cv_prog_M4=m4 ac_cv_prog_MAKEINFO=makeinfo ac_cv_prog_NM=nm ac_cv_prog_OBJCOPY=objcopy ac_cv_prog_OBJDUMP=objdump ac_cv_prog_RANLIB=ranlib ac_cv_prog_READELF=readelf ac_cv_prog_STRIP=strip ac_cv_prog_YACC='bison -y' ac_cv_prog_ac_ct_CC=gcc ac_cv_prog_ac_ct_CXX=g++ ac_cv_prog_cc_c89= ac_cv_prog_cc_g=yes ac_cv_prog_cxx_g=yes ac_cv_target=arm-unknown-linux-musleabihf acx_cv_cc_gcc_supports_ada=no acx_cv_prog_LN=ln gcc_cv_isl=no gcc_cv_prog_cmp_skip='cmp --ignore-initial=16 $$f1 $$f2' gcc_cv_tool_dirs=/mnt/clfs/cross-tools/libexec/gcc/arm-linux-musleabihf/9.2.0:/mnt/clfs/cross-tools/libexec/gcc/arm-linux-musleabihf:/usr/lib/gcc/arm-linux-musleabihf/9.2.0:/usr/lib/gcc/arm-linux-musleabihf:/mnt/clfs/cross-tools/arm-linux-musleabihf/bin/arm-linux-musleabihf/9.2.0:/mnt/clfs/cross-tools/arm-linux-musleabihf/bin: gcc_cv_tool_prefix=/mnt/clfs/cross-tools lt_cv_objdir=.libs ## ----------------- ## ## Output variables. ## ## ----------------- ## AR='ar' AR_FOR_BUILD='$(AR)' AR_FOR_TARGET='/mnt/clfs/cross-tools/arm-linux-musleabihf/bin/ar' AS='as' AS_FOR_BUILD='$(AS)' AS_FOR_TARGET='/mnt/clfs/cross-tools/arm-linux-musleabihf/bin/as' AWK='gawk' BISON='bison' BUILD_CONFIG='' CC='gcc' CC_FOR_BUILD='$(CC)' CC_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/xgcc -B$$r/$(HOST_SUBDIR)/gcc/' CFLAGS='-g -O2' CFLAGS_FOR_BUILD='-g -O2' CFLAGS_FOR_TARGET='-g -O2' COMPILER_AS_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/as' COMPILER_LD_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/collect-ld' COMPILER_NM_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/nm' CONFIGURE_GDB_TK='' CPPFLAGS='' CXX='g++' CXXFLAGS='-g -O2' CXXFLAGS_FOR_BUILD='-g -O2' CXXFLAGS_FOR_TARGET='-g -O2' CXX_FOR_BUILD='$(CXX)' CXX_FOR_TARGET='arm-linux-musleabihf-c++' DEBUG_PREFIX_CFLAGS_FOR_TARGET='' DEFS='-DPACKAGE_NAME=\"\" -DPACKAGE_TARNAME=\"\" -DPACKAGE_VERSION=\"\" -DPACKAGE_STRING=\"\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE_URL=\"\" -DLT_OBJDIR=\".libs/\"' DLLTOOL='dlltool' DLLTOOL_FOR_BUILD='$(DLLTOOL)' DLLTOOL_FOR_TARGET='arm-linux-musleabihf-dlltool' ECHO_C='' ECHO_N='-n' ECHO_T='' EXEEXT='' EXPECT='expect' FLAGS_FOR_TARGET=' -B$(build_tooldir)/bin/ -B$(build_tooldir)/lib/ -isystem $(build_tooldir)/include -isystem $(build_tooldir)/sys-include' FLEX='flex' GCC_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/xgcc -B$$r/$(HOST_SUBDIR)/gcc/' GCC_SHLIB_SUBDIR='' GDB_TK='' GDC_FOR_BUILD='$(GDC)' GDC_FOR_TARGET='arm-linux-musleabihf-gdc' GFORTRAN_FOR_BUILD='$(GFORTRAN)' GFORTRAN_FOR_TARGET='arm-linux-musleabihf-gfortran' GNATBIND='no' GNATMAKE='no' GOC_FOR_BUILD='$(GOC)' GOC_FOR_TARGET='arm-linux-musleabihf-gccgo' INSTALL_DATA='${INSTALL} -m 644' INSTALL_GDB_TK='' INSTALL_PROGRAM='${INSTALL}' INSTALL_SCRIPT='${INSTALL}' LD='ld' LDFLAGS='' LDFLAGS_FOR_BUILD='' LDFLAGS_FOR_TARGET='' LD_FOR_BUILD='$(LD)' LD_FOR_TARGET='/mnt/clfs/cross-tools/arm-linux-musleabihf/bin/ld' LEX='flex' LIBOBJS='' LIBS='' LIPO='lipo' LIPO_FOR_TARGET='arm-linux-musleabihf-lipo' LN='ln' LN_S='ln -s' LTLIBOBJS='' M4='m4' MAINT='#' MAINTAINER_MODE_FALSE='' MAINTAINER_MODE_TRUE='#' MAKEINFO='makeinfo' NM='nm' NM_FOR_BUILD='$(NM)' NM_FOR_TARGET='/mnt/clfs/cross-tools/arm-linux-musleabihf/bin/nm' OBJCOPY='objcopy' OBJCOPY_FOR_TARGET='/mnt/clfs/cross-tools/arm-linux-musleabihf/bin/objcopy' OBJDUMP='objdump' OBJDUMP_FOR_TARGET='/mnt/clfs/cross-tools/arm-linux-musleabihf/bin/objdump' OBJEXT='o' OTOOL='otool' OTOOL_FOR_TARGET='arm-linux-musleabihf-otool' PACKAGE_BUGREPORT='' PACKAGE_NAME='' PACKAGE_STRING='' PACKAGE_TARNAME='' PACKAGE_URL='' PACKAGE_VERSION='' PATH_SEPARATOR=':' RANLIB='ranlib' RANLIB_FOR_BUILD='$(RANLIB)' RANLIB_FOR_TARGET='/mnt/clfs/cross-tools/arm-linux-musleabihf/bin/ranlib' RAW_CXX_FOR_TARGET='arm-linux-musleabihf-c++' READELF='readelf' READELF_FOR_TARGET='/mnt/clfs/cross-tools/arm-linux-musleabihf/bin/readelf' RPATH_ENVVAR='LD_LIBRARY_PATH' RUNTEST='runtest' SED='/bin/sed' SHELL='/bin/bash' STRIP='strip' STRIP_FOR_TARGET='/mnt/clfs/cross-tools/arm-linux-musleabihf/bin/strip' SYSROOT_CFLAGS_FOR_TARGET='' TOPLEVEL_CONFIGURE_ARGUMENTS='../gcc-9.2.0/configure --prefix=/mnt/clfs/cross-tools --build=x86_64-cross-linux-gnu --host=x86_64-cross-linux-gnu --target=arm-linux-musleabihf --with-sysroot=/mnt/clfs/cross-tools/arm-linux-musleabihf --disable-nls --disable-shared --without-headers --with-newlib --disable-decimal-float --disable-libgomp --disable-libmudflap --disable-libssp --disable-libatomic --disable-libquadmath --disable-threads --enable-languages=c --enable-multilib --with-mpfr-include=/mnt/clfs/sources/gcc-build/../gcc-9.2.0/mpfr/src --with-mpfr-lib=/mnt/clfs/sources/gcc-build/mpfr/src/.libs --with-multilib-list=rmprofile' WINDMC='windmc' WINDMC_FOR_BUILD='$(WINDMC)' WINDMC_FOR_TARGET='arm-linux-musleabihf-windmc' WINDRES='windres' WINDRES_FOR_BUILD='$(WINDRES)' WINDRES_FOR_TARGET='arm-linux-musleabihf-windres' YACC='bison -y' ac_ct_CC='gcc' ac_ct_CXX='g++' bindir='${exec_prefix}/bin' build='x86_64-cross-linux-gnu' build_alias='x86_64-cross-linux-gnu' build_configargs=' --cache-file=./config.cache '\''--prefix=/mnt/clfs/cross-tools'\'' '\''--with-sysroot=/mnt/clfs/cross-tools/arm-linux-musleabihf'\'' '\''--disable-nls'\'' '\''--disable-shared'\'' '\''--without-headers'\'' '\''--with-newlib'\'' '\''--disable-decimal-float'\'' '\''--disable-libgomp'\'' '\''--disable-libmudflap'\'' '\''--disable-libssp'\'' '\''--disable-libatomic'\'' '\''--disable-libquadmath'\'' '\''--disable-threads'\'' '\''--enable-multilib'\'' '\''--with-mpfr-include=/mnt/clfs/sources/gcc-build/../gcc-9.2.0/mpfr/src'\'' '\''--with-mpfr-lib=/mnt/clfs/sources/gcc-build/mpfr/src/.libs'\'' '\''--with-multilib-list=rmprofile'\'' '\''--enable-languages=c,lto'\'' --program-transform-name='\''s&^&arm-linux-musleabihf-&'\'' --disable-option-checking' build_configdirs=' libiberty libcpp fixincludes' build_cpu='x86_64' build_libsubdir='build-x86_64-cross-linux-gnu' build_noncanonical='x86_64-cross-linux-gnu' build_os='linux-gnu' build_subdir='build-x86_64-cross-linux-gnu' build_tooldir='${exec_prefix}/arm-linux-musleabihf' build_vendor='cross' compare_exclusions='gcc/cc*-checksum$(objext) | gcc/ada/*tools/*' configdirs=' intl libiberty zlib libbacktrace libcpp libdecnumber gmp mpfr mpc fixincludes gcc libcc1 lto-plugin' datadir='${datarootdir}' datarootdir='${prefix}/share' do_compare='cmp --ignore-initial=16 $$f1 $$f2' docdir='${datarootdir}/doc/${PACKAGE}' dvidir='${docdir}' exec_prefix='${prefix}' extra_host_libiberty_configure_flags='--enable-shared' extra_host_zlib_configure_flags='' extra_isl_gmp_configure_flags='--with-gmp-builddir=$$r/$(HOST_SUBDIR)/gmp' extra_liboffloadmic_configure_flags='' extra_linker_plugin_configure_flags='' extra_linker_plugin_flags='' extra_mpc_gmp_configure_flags='--with-gmp-include=$$r/$(HOST_SUBDIR)/gmp --with-gmp-lib=$$r/$(HOST_SUBDIR)/gmp/.libs' extra_mpc_mpfr_configure_flags='' extra_mpfr_configure_flags='--with-gmp-include=$$r/$(HOST_SUBDIR)/gmp --with-gmp-lib=$$r/$(HOST_SUBDIR)/gmp/.libs' get_gcc_base_ver='cat' gmpinc='-I$$r/$(HOST_SUBDIR)/gmp -I$$s/gmp -I/mnt/clfs/sources/gcc-build/../gcc-9.2.0/mpfr/src -I$$s/mpc/src ' gmplibs='-L$$r/$(HOST_SUBDIR)/gmp/.libs -L/mnt/clfs/sources/gcc-build/mpfr/src/.libs -L$$r/$(HOST_SUBDIR)/mpc/src/.libs -lmpc -lmpfr -lgmp' host='x86_64-cross-linux-gnu' host_alias='x86_64-cross-linux-gnu' host_configargs=' --cache-file=./config.cache '\''--prefix=/mnt/clfs/cross-tools'\'' '\''--with-sysroot=/mnt/clfs/cross-tools/arm-linux-musleabihf'\'' '\''--disable-nls'\'' '\''--disable-shared'\'' '\''--without-headers'\'' '\''--with-newlib'\'' '\''--disable-decimal-float'\'' '\''--disable-libgomp'\'' '\''--disable-libmudflap'\'' '\''--disable-libssp'\'' '\''--disable-libatomic'\'' '\''--disable-libquadmath'\'' '\''--disable-threads'\'' '\''--enable-multilib'\'' '\''--with-mpfr-include=/mnt/clfs/sources/gcc-build/../gcc-9.2.0/mpfr/src'\'' '\''--with-mpfr-lib=/mnt/clfs/sources/gcc-build/mpfr/src/.libs'\'' '\''--with-multilib-list=rmprofile'\'' '\''--enable-languages=c,lto'\'' --program-transform-name='\''s&^&arm-linux-musleabihf-&'\'' --disable-option-checking' host_cpu='x86_64' host_noncanonical='x86_64-cross-linux-gnu' host_os='linux-gnu' host_shared='no' host_subdir='.' host_vendor='cross' htmldir='${docdir}' includedir='${prefix}/include' infodir='${datarootdir}/info' islinc='' isllibs='' libdir='${exec_prefix}/lib' libexecdir='${exec_prefix}/libexec' localedir='${datarootdir}/locale' localstatedir='${prefix}/var' mandir='${datarootdir}/man' oldincludedir='/usr/include' pdfdir='${docdir}' poststage1_ldflags='-static-libstdc++ -static-libgcc' poststage1_libs='' prefix='/mnt/clfs/cross-tools' program_transform_name='s&^&arm-linux-musleabihf-&' psdir='${docdir}' sbindir='${exec_prefix}/sbin' sharedstatedir='${prefix}/com' stage1_cflags='-g' stage1_checking='--enable-checking=yes,types' stage1_languages='c,lto' stage1_ldflags='-static-libstdc++ -static-libgcc' stage1_libs='' stage2_werror_flag='' sysconfdir='${prefix}/etc' target='arm-unknown-linux-musleabihf' target_alias='arm-linux-musleabihf' target_configargs='--cache-file=./config.cache --with-cross-host=x86_64-cross-linux-gnu '\''--prefix=/mnt/clfs/cross-tools'\'' '\''--with-sysroot=/mnt/clfs/cross-tools/arm-linux-musleabihf'\'' '\''--disable-nls'\'' '\''--disable-shared'\'' '\''--without-headers'\'' '\''--with-newlib'\'' '\''--disable-decimal-float'\'' '\''--disable-libgomp'\'' '\''--disable-libmudflap'\'' '\''--disable-libssp'\'' '\''--disable-libatomic'\'' '\''--disable-libquadmath'\'' '\''--disable-threads'\'' '\''--enable-multilib'\'' '\''--with-multilib-list=rmprofile'\'' '\''--enable-languages=c,lto'\'' --program-transform-name='\''s&^&arm-linux-musleabihf-&'\'' --disable-option-checking' target_configdirs=' libgcc' target_cpu='arm' target_noncanonical='arm-linux-musleabihf' target_os='linux-musleabihf' target_subdir='arm-linux-musleabihf' target_vendor='unknown' tooldir='${exec_prefix}/arm-linux-musleabihf' ## ------------------- ## ## File substitutions. ## ## ------------------- ## alphaieee_frag='/dev/null' host_makefile_frag='/dev/null' ospace_frag='/dev/null' serialization_dependencies='serdep.tmp' target_makefile_frag='../gcc-9.2.0/config/mt-gnu' ## ----------- ## ## confdefs.h. ## ## ----------- ## /* confdefs.h */ #define PACKAGE_NAME "" #define PACKAGE_TARNAME "" #define PACKAGE_VERSION "" #define PACKAGE_STRING "" #define PACKAGE_BUGREPORT "" #define PACKAGE_URL "" #define LT_OBJDIR ".libs/" configure: exit 0 What could be the problem? --------------------------------------------------------------- On Mon, Nov 11, 2019 at 01:42:43PM +0000, Richard Earnshaw (lists) wrote: > On 11/11/2019 13:33, sayed israr wrote: > > ---------- Forwarded message --------- > > From: Israr Sayed <sd.israr@gmail.com> > > Date: Mon, Nov 11, 2019 at 5:38 PM > > Subject: Re: Is it possible to build Single GCC Executable for armv5, > > armv6, armv7-{cortex-xx-{A,R,M}},armv8 etc.? > > To: Jonathan Wakely <jwakely.gcc@gmail.com> > > > > > > I am building GCC from sources.Where i can configure it with 2 ways: > > (1) --with-arch --with-cpu --with-fpu --with-float options . > > (2) --with-multilib-list= . > > In --with-multilib-list, we can configure for various combinations of > > armv*-*-*. > > For example, I want to build gcc for with arch = armv7, armv7-m, armv7e-m, > > with float = hard, softfp, soft. > > with fpu = fpv, fpv4, fpv4-d16 etc.. > > whereas if in configure i mention --with-arch --with-fpu --with-float.That > > will build GCC for those options only. > > I have a prebuilt arm GCC binary for STM32F controllers, which is built for > > whole range of armv7-M, armv7e-m along with FPUs. > > there configure options show --with-multilib-list=rmprofile. > > rmprofile is the multilib option for configure.Which is exactly what > > gcc/config/arm/t-rmprofile file is about. > > I hope i can explain my question better. > > You can configure the compiler with --with-multlib-list=xxx > > where xxx is any of "aprofile", "rmprofile" and "aprofile,rmprofile" > > If you do this, DO NOT specify any of --with-fpu, --with-cpu, --with-tune or > --with-arch. > > Be warned, the full set of multilibs is LARGE. It requires a fast machine > and/or a lot of time to build them all. > > You can, of course, edit any of the files - the GPL gives you that right, > but if you do so, you're most likely on your own. The multilib > configurations are complex and rely heavily on GNU Makefile trickery to > express all the required combinations. > > R. > > > ------------------------------------------------------ > > > > On Mon, Nov 11, 2019 at 11:40:39AM +0000, Jonathan Wakely wrote: > > > On Sun, 10 Nov 2019 at 11:36, Israr Sayed <sd.israr@gmail.com> wrote: > > > > > > > > Digging into the sources of GCC I noticed in files gcc/config/arm/t-*, > > There are multiple arm target options. > > > > > > > > Reading [GCC internal Manual], These are called Target Makefile > > Fragments, which will be included in main Makefile, like MULTILIB_OPTIONS, > > MULTILIB_DIRNAMES, MULTILIB_MATCHES, MULTILIB_REQUIRED, MULTILIB_REUSE, > > MULTILIB_EXTRA_OPTS, MULTILIB_OSDIRNAMES, MULTIARCH_DIRNAME. > > > > > > > > What I am not able to understand that how to bring it in at the time of > > configure.Which option to choose? > > > > > > > > More over is it possible to edit those t-* files as per the requirement > > and how? > > > > Please Help. > > > > > > I don't understand your question. Your email's subject talks about a > > > single GCC executable for multiple ARM variants, which is supported > > > automatically. When you configure GCC for an ARM target you can select > > > the specific processor type using the -march and/or -mcpu options. See > > > the documentation of command-line options in the GCC manual. > > > > > > You don't need to do anything special to use the target makefile > > > fragments, they're used automatically, as needed. > ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: Fwd: Is it possible to build Single GCC Executable for armv5, armv6, armv7-{cortex-xx-{A,R,M}},armv8 etc.? 2019-11-11 17:50 ` Israr Sayed @ 2019-11-12 10:01 ` Richard Earnshaw (lists) 2019-11-16 23:07 ` Israr Sayed 0 siblings, 1 reply; 9+ messages in thread From: Richard Earnshaw (lists) @ 2019-11-12 10:01 UTC (permalink / raw) To: Israr Sayed; +Cc: gcc-help On 11/11/2019 17:49, Israr Sayed wrote: > As per your instructions i tried to build the GCC.I got the following errors: > /mnt/clfs/sources/gcc-build/./gcc/xgcc -B/mnt/clfs/sources/gcc-build/./gcc/ -B/mnt/clfs/cross-tools/arm-linux-musleabihf/bin/ -B/mnt/clfs/cross-tools/arm-linux-musleabihf/lib/ -isystem /mnt/clfs/cross-tools/arm-linux-musleabihf/include -isystem /mnt/clfs/cross-tools/arm-linux-musleabihf/sys-include -g -O2 -mthumb -march=armv6s-m -mfloat-abi=soft -O2 -g -O2 -DIN_GCC -DCROSS_DIRECTORY_STRUCTURE -W -Wall -Wno-narrowing -Wwrite-strings -Wcast-qual -Wstrict-prototypes -Wmissing-prototypes -Wold-style-definition -isystem ./include -fPIC -fno-inline -g -DIN_LIBGCC2 -fbuilding-libgcc -fno-stack-protector -Dinhibit_libc -fPIC -fno-inline -I. -I. -I../../../../.././gcc -I../../../../../../gcc-9.2.0/libgcc -I../../../../../../gcc-9.2.0/libgcc/. -I../../../../../../gcc-9.2.0/libgcc/../gcc -I../../../../../../gcc-9.2.0/libgcc/../include -DHAVE_CC_TLS -o _dvmd_lnx_s.o -MT _dvmd_lnx_s.o -MD -MP -MF _dvmd_lnx_s.dep -DSHARED -DL_dvmd_lnx -xassembler-with-cpp -c ../../../../../../gcc-9.2.0/libgcc/config/arm/lib1funcs.S > ../../../../../../gcc-9.2.0/libgcc/config/arm/lib1funcs.S: Assembler messages: > ../../../../../../gcc-9.2.0/libgcc/config/arm/lib1funcs.S:1482: Error: bad instruction `arm_func_start aeabi_idiv0' > ../../../../../../gcc-9.2.0/libgcc/config/arm/lib1funcs.S:1483: Error: bad instruction `arm_func_start aeabi_ldiv0' > ../../../../../../gcc-9.2.0/libgcc/config/arm/lib1funcs.S:1484: Error: selected processor does not support `stmfd sp!,{r1,lr}' in Thumb mode > ../../../../../../gcc-9.2.0/libgcc/config/arm/lib1funcs.S:1495: Error: lo register required -- `ldmia sp!,{r1,pc}' > ../../../../../../gcc-9.2.0/libgcc/config/arm/lib1funcs.S:1485: Error: invalid operands (.text and *UND* sections) for `-' > ../../../../../../gcc-9.2.0/libgcc/config/arm/lib1funcs.S:1479: Error: can't resolve `.text' {.text section} - `__aeabi_ldiv0' {*UND* section} > /tmp/cc0Si52Z.s: Error: .size expression for __aeabi_ldiv0 does not evaluate to a constant > /tmp/cc0Si52Z.s: Error: .size expression for __aeabi_idiv0 does not evaluate to a constant > make[3]: *** [Makefile:488: _dvmd_lnx_s.o] Error 1 > make[3]: Leaving directory '/mnt/clfs/sources/gcc-build/arm-linux-musleabihf/thumb/v6-m/nofp/libgcc' > make[2]: *** [Makefile:1210: multi-do] Error 1 > make[2]: Leaving directory '/mnt/clfs/sources/gcc-build/arm-linux-musleabihf/libgcc' > make[1]: *** [Makefile:127: all-multi] Error 2 > make[1]: Leaving directory '/mnt/clfs/sources/gcc-build/arm-linux-musleabihf/libgcc' > make: *** [Makefile:12499: all-target-libgcc] Error 2 > ---------------------------------------------------------- > Config.log: > This file contains any messages produced by compilers while > running configure, to aid debugging if configure makes a mistake. > > It was created by configure, which was > generated by GNU Autoconf 2.69. Invocation command line was > > $ ../gcc-9.2.0/configure --prefix=/mnt/clfs/cross-tools --build=x86_64-cross-linux-gnu --host=x86_64-cross-linux-gnu --target=arm-linux-musleabihf --with-sysroot=/mnt/clfs/cross-tools/arm-linux-musleabihf --disable-nls --disable-shared --without-headers --with-newlib --disable-decimal-float --disable-libgomp --disable-libmudflap --disable-libssp --disable-libatomic --disable-libquadmath --disable-threads --enable-languages=c --enable-multilib --with-mpfr-include=/mnt/clfs/sources/gcc-build/../gcc-9.2.0/mpfr/src --with-mpfr-lib=/mnt/clfs/sources/gcc-build/mpfr/src/.libs --with-multilib-list=rmprofile > Sorry, I should have said that these multilib configs have only been tested with bare metal tools (arm-none-eabi). The error you are seeing is because the Linux configurations assume that the Arm instruction set exists and on M-profile devices this is not true. Standard linux configurations also assume the presence of an MMU and no M-profile devices support this. R. > ## --------- ## > ## Platform. ## > ## --------- ## > > hostname = hib > uname -m = x86_64 > uname -r = 5.3.0-19-generic > uname -s = Linux > uname -v = #20-Ubuntu SMP Fri Oct 18 09:04:39 UTC 2019 > > /usr/bin/uname -p = x86_64 > /bin/uname -X = unknown > > /bin/arch = x86_64 > /usr/bin/arch -k = unknown > /usr/convex/getsysinfo = unknown > /usr/bin/hostinfo = unknown > /bin/machine = unknown > /usr/bin/oslevel = unknown > /bin/universe = unknown > > PATH: /mnt/clfs/cross-tools/bin > PATH: /bin > PATH: /usr/bin > > > ## ----------- ## > ## Core tests. ## > ## ----------- ## > > configure:2348: checking build system type > configure:2362: result: x86_64-cross-linux-gnu > configure:2409: checking host system type > configure:2422: result: x86_64-cross-linux-gnu > configure:2442: checking target system type > configure:2455: result: arm-unknown-linux-musleabihf > configure:2509: checking for a BSD-compatible install > configure:2577: result: /bin/install -c > configure:2588: checking whether ln works > configure:2610: result: yes > configure:2614: checking whether ln -s works > configure:2618: result: yes > configure:2625: checking for a sed that does not truncate output > configure:2689: result: /bin/sed > configure:2698: checking for gawk > configure:2714: found /bin/gawk > configure:2725: result: gawk > configure:3257: checking for libitm support > configure:3267: result: yes > configure:3276: checking for libsanitizer support > configure:3286: result: yes > configure:3295: checking for libvtv support > configure:3305: result: yes > configure:3315: checking for libhsail-rt support > configure:3321: result: no > configure:3406: checking for libphobos support > configure:3416: result: yes > configure:4036: checking for x86_64-cross-linux-gnu-gcc > configure:4066: result: no > configure:4076: checking for gcc > configure:4092: found /bin/gcc > configure:4103: result: gcc > configure:4332: checking for C compiler version > configure:4341: gcc --version >&5 > gcc (Ubuntu 9.2.1-9ubuntu2) 9.2.1 20191008 > Copyright (C) 2019 Free Software Foundation, Inc. > This is free software; see the source for copying conditions. There is NO > warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. > > configure:4352: $? = 0 > configure:4341: gcc -v >&5 > Using built-in specs. > COLLECT_GCC=gcc > COLLECT_LTO_WRAPPER=/usr/lib/gcc/x86_64-linux-gnu/9/lto-wrapper > OFFLOAD_TARGET_NAMES=nvptx-none:hsa > OFFLOAD_TARGET_DEFAULT=1 > Target: x86_64-linux-gnu > Configured with: ../src/configure -v --with-pkgversion='Ubuntu 9.2.1-9ubuntu2' --with-bugurl=file:///usr/share/doc/gcc-9/README.Bugs --enable-languages=c,ada,c++,go,brig,d,fortran,objc,obj-c++,gm2 --prefix=/usr --with-gcc-major-version-only --program-suffix=-9 --program-prefix=x86_64-linux-gnu- --enable-shared --enable-linker-build-id --libexecdir=/usr/lib --without-included-gettext --enable-threads=posix --libdir=/usr/lib --enable-nls --enable-bootstrap --enable-clocale=gnu --enable-libstdcxx-debug --enable-libstdcxx-time=yes --with-default-libstdcxx-abi=new --enable-gnu-unique-object --disable-vtable-verify --enable-plugin --enable-default-pie --with-system-zlib --with-target-system-zlib=auto --enable-multiarch --disable-werror --with-arch-32=i686 --with-abi=m64 --with-multilib-list=m32,m64,mx32 --enable-multilib --with-tune=generic --enable-offload-targets=nvptx-none,hsa --without-cuda-driver --enable-checking=release --build=x86_64-linux-gnu --host=x86_64-linux-gnu --target=x86_64-linux-gnu > Thread model: posix > gcc version 9.2.1 20191008 (Ubuntu 9.2.1-9ubuntu2) > configure:4352: $? = 0 > configure:4341: gcc -V >&5 > gcc: error: unrecognized command line option '-V' > gcc: fatal error: no input files > compilation terminated. > configure:4352: $? = 1 > configure:4341: gcc -qversion >&5 > gcc: error: unrecognized command line option '-qversion'; did you mean '--version'? > gcc: fatal error: no input files > compilation terminated. > configure:4352: $? = 1 > configure:4372: checking whether the C compiler works > configure:4394: gcc conftest.c >&5 > configure:4398: $? = 0 > configure:4446: result: yes > configure:4449: checking for C compiler default output file name > configure:4451: result: a.out > configure:4457: checking for suffix of executables > configure:4464: gcc -o conftest conftest.c >&5 > configure:4468: $? = 0 > configure:4490: result: > configure:4512: checking whether we are cross compiling > configure:4520: gcc -o conftest conftest.c >&5 > configure:4524: $? = 0 > configure:4531: ./conftest > configure:4535: $? = 0 > configure:4523: result: no > configure:4528: checking for suffix of object files > configure:4550: gcc -c conftest.c >&5 > configure:4554: $? = 0 > configure:4575: result: o > configure:4579: checking whether we are using the GNU C compiler > configure:4598: gcc -c conftest.c >&5 > configure:4598: $? = 0 > configure:4607: result: yes > configure:4616: checking whether gcc accepts -g > configure:4636: gcc -c -g conftest.c >&5 > configure:4636: $? = 0 > configure:4677: result: yes > configure:4694: checking for gcc option to accept ISO C89 > configure:4757: gcc -c -g -O2 conftest.c >&5 > configure:4757: $? = 0 > configure:4770: result: none needed > configure:4804: checking for x86_64-cross-linux-gnu-g++ > configure:4834: result: no > configure:4804: checking for x86_64-cross-linux-gnu-c++ > configure:4834: result: no > configure:4804: checking for x86_64-cross-linux-gnu-gpp > configure:4834: result: no > configure:4804: checking for x86_64-cross-linux-gnu-aCC > configure:4834: result: no > configure:4804: checking for x86_64-cross-linux-gnu-CC > configure:4834: result: no > configure:4804: checking for x86_64-cross-linux-gnu-cxx > configure:4834: result: no > configure:4804: checking for x86_64-cross-linux-gnu-cc++ > configure:4834: result: no > configure:4804: checking for x86_64-cross-linux-gnu-cl.exe > configure:4834: result: no > configure:4804: checking for x86_64-cross-linux-gnu-FCC > configure:4834: result: no > configure:4804: checking for x86_64-cross-linux-gnu-KCC > configure:4834: result: no > configure:4804: checking for x86_64-cross-linux-gnu-RCC > configure:4834: result: no > configure:4804: checking for x86_64-cross-linux-gnu-xlC_r > configure:4834: result: no > configure:4804: checking for x86_64-cross-linux-gnu-xlC > configure:4834: result: no > configure:4848: checking for g++ > configure:4864: found /bin/g++ > configure:4875: result: g++ > configure:4902: checking for C++ compiler version > configure:4911: g++ --version >&5 > g++ (Ubuntu 9.2.1-9ubuntu2) 9.2.1 20191008 > Copyright (C) 2019 Free Software Foundation, Inc. > This is free software; see the source for copying conditions. There is NO > warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. > > configure:4922: $? = 0 > configure:4911: g++ -v >&5 > Using built-in specs. > COLLECT_GCC=g++ > COLLECT_LTO_WRAPPER=/usr/lib/gcc/x86_64-linux-gnu/9/lto-wrapper > OFFLOAD_TARGET_NAMES=nvptx-none:hsa > OFFLOAD_TARGET_DEFAULT=1 > Target: x86_64-linux-gnu > Configured with: ../src/configure -v --with-pkgversion='Ubuntu 9.2.1-9ubuntu2' --with-bugurl=file:///usr/share/doc/gcc-9/README.Bugs --enable-languages=c,ada,c++,go,brig,d,fortran,objc,obj-c++,gm2 --prefix=/usr --with-gcc-major-version-only --program-suffix=-9 --program-prefix=x86_64-linux-gnu- --enable-shared --enable-linker-build-id --libexecdir=/usr/lib --without-included-gettext --enable-threads=posix --libdir=/usr/lib --enable-nls --enable-bootstrap --enable-clocale=gnu --enable-libstdcxx-debug --enable-libstdcxx-time=yes --with-default-libstdcxx-abi=new --enable-gnu-unique-object --disable-vtable-verify --enable-plugin --enable-default-pie --with-system-zlib --with-target-system-zlib=auto --enable-multiarch --disable-werror --with-arch-32=i686 --with-abi=m64 --with-multilib-list=m32,m64,mx32 --enable-multilib --with-tune=generic --enable-offload-targets=nvptx-none,hsa --without-cuda-driver --enable-checking=release --build=x86_64-linux-gnu --host=x86_64-linux-gnu --target=x86_64-linux-gnu > Thread model: posix > gcc version 9.2.1 20191008 (Ubuntu 9.2.1-9ubuntu2) > configure:4922: $? = 0 > configure:4911: g++ -V >&5 > g++: error: unrecognized command line option '-V' > g++: fatal error: no input files > compilation terminated. > configure:4922: $? = 1 > configure:4911: g++ -qversion >&5 > g++: error: unrecognized command line option '-qversion'; did you mean '--version'? > g++: fatal error: no input files > compilation terminated. > configure:4922: $? = 1 > configure:4926: checking whether we are using the GNU C++ compiler > configure:4945: g++ -c conftest.cpp >&5 > configure:4945: $? = 0 > configure:4954: result: yes > configure:4963: checking whether g++ accepts -g > configure:4983: g++ -c -g conftest.cpp >&5 > configure:4983: $? = 0 > configure:5024: result: yes > configure:5073: checking whether g++ accepts -static-libstdc++ -static-libgcc > configure:5090: g++ -o conftest -g -O2 -static-libstdc++ -static-libgcc conftest.cpp >&5 > configure:5090: $? = 0 > configure:5091: result: yes > configure:5115: checking for x86_64-cross-linux-gnu-gnatbind > configure:5145: result: no > configure:5155: checking for gnatbind > configure:5185: result: no > configure:5207: checking for x86_64-cross-linux-gnu-gnatmake > configure:5237: result: no > configure:5247: checking for gnatmake > configure:5277: result: no > configure:5296: checking whether compiler driver understands Ada > configure:5319: result: no > configure:5328: checking how to compare bootstrapped objects > configure:5353: result: cmp --ignore-initial=16 $$f1 $$f2 > configure:5413: checking for objdir > configure:5428: result: .libs > configure:5976: checking for isl 0.15 or later > configure:5989: gcc -o conftest -g -O2 -I$$r/$(HOST_SUBDIR)/gmp -I$$s/gmp -I/mnt/clfs/sources/gcc-build/../gcc-9.2.0/mpfr/src -I$$s/mpc/src -lisl -L$$r/$(HOST_SUBDIR)/gmp/.libs -L/mnt/clfs/sources/gcc-build/mpfr/src/.libs -L$$r/$(HOST_SUBDIR)/mpc/src/.libs -lmpc -lmpfr -lgmp conftest.c -lisl -lgmp >&5 > conftest.c:10:10: fatal error: isl/schedule.h: No such file or directory > 10 | #include <isl/schedule.h> > | ^~~~~~~~~~~~~~~~ > compilation terminated. > configure:5989: $? = 1 > configure: failed program was: > | /* confdefs.h */ > | #define PACKAGE_NAME "" > | #define PACKAGE_TARNAME "" > | #define PACKAGE_VERSION "" > | #define PACKAGE_STRING "" > | #define PACKAGE_BUGREPORT "" > | #define PACKAGE_URL "" > | #define LT_OBJDIR ".libs/" > | /* end confdefs.h. */ > | #include <isl/schedule.h> > | int > | main () > | { > | isl_options_set_schedule_serialize_sccs (NULL, 0); > | ; > | return 0; > | } > configure:5996: result: no > configure:6000: result: required isl version is 0.15 or later > configure:7093: checking for default BUILD_CONFIG > configure:7125: result: > configure:7130: checking for --enable-vtable-verify > configure:7143: result: no > configure:7744: checking for bison > configure:7760: found /bin/bison > configure:7771: result: bison -y > configure:7791: checking for bison > configure:7807: found /bin/bison > configure:7818: result: bison > configure:7838: checking for gm4 > configure:7868: result: no > configure:7838: checking for gnum4 > configure:7868: result: no > configure:7838: checking for m4 > configure:7854: found /bin/m4 > configure:7865: result: m4 > configure:7885: checking for flex > configure:7901: found /bin/flex > configure:7912: result: flex > configure:7933: checking for flex > configure:7949: found /bin/flex > configure:7960: result: flex > configure:7980: checking for makeinfo > configure:7996: found /bin/makeinfo > configure:8007: result: makeinfo > configure:8041: checking for expect > configure:8057: found /bin/expect > configure:8068: result: expect > configure:8090: checking for runtest > configure:8120: result: no > configure:8196: checking for x86_64-cross-linux-gnu-ar > configure:8226: result: no > configure:8235: checking for ar > configure:8251: found /bin/ar > configure:8262: result: ar > configure:8337: checking for x86_64-cross-linux-gnu-as > configure:8367: result: no > configure:8376: checking for as > configure:8392: found /bin/as > configure:8403: result: as > configure:8478: checking for x86_64-cross-linux-gnu-dlltool > configure:8508: result: no > configure:8517: checking for dlltool > configure:8547: result: no > configure:8619: checking for x86_64-cross-linux-gnu-ld > configure:8649: result: no > configure:8658: checking for ld > configure:8674: found /bin/ld > configure:8685: result: ld > configure:8760: checking for x86_64-cross-linux-gnu-lipo > configure:8790: result: no > configure:8799: checking for lipo > configure:8829: result: no > configure:8901: checking for x86_64-cross-linux-gnu-nm > configure:8931: result: no > configure:8940: checking for nm > configure:8956: found /bin/nm > configure:8967: result: nm > configure:9042: checking for x86_64-cross-linux-gnu-ranlib > configure:9072: result: no > configure:9081: checking for ranlib > configure:9097: found /bin/ranlib > configure:9108: result: ranlib > configure:9178: checking for x86_64-cross-linux-gnu-strip > configure:9208: result: no > configure:9217: checking for strip > configure:9233: found /bin/strip > configure:9244: result: strip > configure:9314: checking for x86_64-cross-linux-gnu-windres > configure:9344: result: no > configure:9353: checking for windres > configure:9383: result: no > configure:9455: checking for x86_64-cross-linux-gnu-windmc > configure:9485: result: no > configure:9494: checking for windmc > configure:9524: result: no > configure:9596: checking for x86_64-cross-linux-gnu-objcopy > configure:9626: result: no > configure:9635: checking for objcopy > configure:9651: found /bin/objcopy > configure:9662: result: objcopy > configure:9737: checking for x86_64-cross-linux-gnu-objdump > configure:9767: result: no > configure:9776: checking for objdump > configure:9792: found /bin/objdump > configure:9803: result: objdump > configure:9878: checking for x86_64-cross-linux-gnu-otool > configure:9908: result: no > configure:9917: checking for otool > configure:9947: result: no > configure:10019: checking for x86_64-cross-linux-gnu-readelf > configure:10049: result: no > configure:10058: checking for readelf > configure:10074: found /bin/readelf > configure:10085: result: readelf > configure:10199: checking for arm-linux-musleabihf-cc > configure:10229: result: no > configure:10199: checking for arm-linux-musleabihf-gcc > configure:10229: result: no > configure:10360: checking for arm-linux-musleabihf-c++ > configure:10390: result: no > configure:10360: checking for arm-linux-musleabihf-g++ > configure:10390: result: no > configure:10360: checking for arm-linux-musleabihf-cxx > configure:10390: result: no > configure:10360: checking for arm-linux-musleabihf-gxx > configure:10390: result: no > configure:10521: checking for arm-linux-musleabihf-gcc > configure:10551: result: no > configure:10677: checking for arm-linux-musleabihf-gfortran > configure:10707: result: no > configure:10838: checking for arm-linux-musleabihf-gccgo > configure:10868: result: no > configure:10999: checking for arm-linux-musleabihf-gdc > configure:11029: result: no > configure:11129: checking for ar > configure:11147: found /mnt/clfs/cross-tools/arm-linux-musleabihf/bin/ar > configure:11159: result: /mnt/clfs/cross-tools/arm-linux-musleabihf/bin/ar > configure:11359: checking for as > configure:11377: found /mnt/clfs/cross-tools/arm-linux-musleabihf/bin/as > configure:11389: result: /mnt/clfs/cross-tools/arm-linux-musleabihf/bin/as > configure:11589: checking for dlltool > configure:11622: result: no > configure:11700: checking for arm-linux-musleabihf-dlltool > configure:11730: result: no > configure:11819: checking for ld > configure:11837: found /mnt/clfs/cross-tools/arm-linux-musleabihf/bin/ld > configure:11849: result: /mnt/clfs/cross-tools/arm-linux-musleabihf/bin/ld > configure:12049: checking for lipo > configure:12082: result: no > configure:12160: checking for arm-linux-musleabihf-lipo > configure:12190: result: no > configure:12279: checking for nm > configure:12297: found /mnt/clfs/cross-tools/arm-linux-musleabihf/bin/nm > configure:12309: result: /mnt/clfs/cross-tools/arm-linux-musleabihf/bin/nm > configure:12509: checking for objcopy > configure:12527: found /mnt/clfs/cross-tools/arm-linux-musleabihf/bin/objcopy > configure:12539: result: /mnt/clfs/cross-tools/arm-linux-musleabihf/bin/objcopy > configure:12739: checking for objdump > configure:12757: found /mnt/clfs/cross-tools/arm-linux-musleabihf/bin/objdump > configure:12769: result: /mnt/clfs/cross-tools/arm-linux-musleabihf/bin/objdump > configure:12969: checking for otool > configure:13002: result: no > configure:13080: checking for arm-linux-musleabihf-otool > configure:13110: result: no > configure:13199: checking for ranlib > configure:13217: found /mnt/clfs/cross-tools/arm-linux-musleabihf/bin/ranlib > configure:13229: result: /mnt/clfs/cross-tools/arm-linux-musleabihf/bin/ranlib > configure:13429: checking for readelf > configure:13447: found /mnt/clfs/cross-tools/arm-linux-musleabihf/bin/readelf > configure:13459: result: /mnt/clfs/cross-tools/arm-linux-musleabihf/bin/readelf > configure:13659: checking for strip > configure:13677: found /mnt/clfs/cross-tools/arm-linux-musleabihf/bin/strip > configure:13689: result: /mnt/clfs/cross-tools/arm-linux-musleabihf/bin/strip > configure:13889: checking for windres > configure:13922: result: no > configure:14000: checking for arm-linux-musleabihf-windres > configure:14030: result: no > configure:14119: checking for windmc > configure:14152: result: no > configure:14230: checking for arm-linux-musleabihf-windmc > configure:14260: result: no > configure:14327: checking where to find the target ar > configure:14355: result: pre-installed in /mnt/clfs/cross-tools/arm-linux-musleabihf/bin > configure:14369: checking where to find the target as > configure:14397: result: pre-installed in /mnt/clfs/cross-tools/arm-linux-musleabihf/bin > configure:14411: checking where to find the target cc > configure:14434: result: just compiled > configure:14453: checking where to find the target c++ > configure:14493: result: pre-installed > configure:14498: checking where to find the target c++ for libstdc++ > configure:14538: result: pre-installed > configure:14543: checking where to find the target dlltool > configure:14580: result: pre-installed > configure:14585: checking where to find the target gcc > configure:14608: result: just compiled > configure:14627: checking where to find the target gfortran > configure:14667: result: pre-installed > configure:14672: checking where to find the target gccgo > configure:14712: result: pre-installed > configure:14717: checking where to find the target gdc > configure:14757: result: pre-installed > configure:14762: checking where to find the target ld > configure:14790: result: pre-installed in /mnt/clfs/cross-tools/arm-linux-musleabihf/bin > configure:14804: checking where to find the target lipo > configure:14830: result: pre-installed > configure:14835: checking where to find the target nm > configure:14863: result: pre-installed in /mnt/clfs/cross-tools/arm-linux-musleabihf/bin > configure:14877: checking where to find the target objcopy > configure:14905: result: pre-installed in /mnt/clfs/cross-tools/arm-linux-musleabihf/bin > configure:14919: checking where to find the target objdump > configure:14947: result: pre-installed in /mnt/clfs/cross-tools/arm-linux-musleabihf/bin > configure:14961: checking where to find the target otool > configure:14987: result: pre-installed > configure:14992: checking where to find the target ranlib > configure:15020: result: pre-installed in /mnt/clfs/cross-tools/arm-linux-musleabihf/bin > configure:15034: checking where to find the target readelf > configure:15062: result: pre-installed in /mnt/clfs/cross-tools/arm-linux-musleabihf/bin > configure:15076: checking where to find the target strip > configure:15104: result: pre-installed in /mnt/clfs/cross-tools/arm-linux-musleabihf/bin > configure:15118: checking where to find the target windres > configure:15155: result: pre-installed > configure:15160: checking where to find the target windmc > configure:15197: result: pre-installed > configure:15230: checking whether to enable maintainer-specific portions of Makefiles > configure:15239: result: no > configure:15474: creating ./config.status > > ## ---------------------- ## > ## Running config.status. ## > ## ---------------------- ## > > This file was extended by config.status, which was > generated by GNU Autoconf 2.69. Invocation command line was > > CONFIG_FILES = > CONFIG_HEADERS = > CONFIG_LINKS = > CONFIG_COMMANDS = > $ ./config.status > > on hib > > config.status:1016: creating Makefile > > ## ---------------- ## > ## Cache variables. ## > ## ---------------- ## > > ac_cv_build=x86_64-cross-linux-gnu > ac_cv_c_compiler_gnu=yes > ac_cv_cxx_compiler_gnu=yes > ac_cv_env_AR_FOR_TARGET_set= > ac_cv_env_AR_FOR_TARGET_value= > ac_cv_env_AR_set= > ac_cv_env_AR_value= > ac_cv_env_AS_FOR_TARGET_set= > ac_cv_env_AS_FOR_TARGET_value= > ac_cv_env_AS_set= > ac_cv_env_AS_value= > ac_cv_env_CCC_set= > ac_cv_env_CCC_value= > ac_cv_env_CC_FOR_TARGET_set= > ac_cv_env_CC_FOR_TARGET_value= > ac_cv_env_CC_set= > ac_cv_env_CC_value= > ac_cv_env_CFLAGS_set= > ac_cv_env_CFLAGS_value= > ac_cv_env_CPPFLAGS_set= > ac_cv_env_CPPFLAGS_value= > ac_cv_env_CXXFLAGS_set= > ac_cv_env_CXXFLAGS_value= > ac_cv_env_CXX_FOR_TARGET_set= > ac_cv_env_CXX_FOR_TARGET_value= > ac_cv_env_CXX_set= > ac_cv_env_CXX_value= > ac_cv_env_DLLTOOL_FOR_TARGET_set= > ac_cv_env_DLLTOOL_FOR_TARGET_value= > ac_cv_env_DLLTOOL_set= > ac_cv_env_DLLTOOL_value= > ac_cv_env_GCC_FOR_TARGET_set= > ac_cv_env_GCC_FOR_TARGET_value= > ac_cv_env_GDC_FOR_TARGET_set= > ac_cv_env_GDC_FOR_TARGET_value= > ac_cv_env_GFORTRAN_FOR_TARGET_set= > ac_cv_env_GFORTRAN_FOR_TARGET_value= > ac_cv_env_GOC_FOR_TARGET_set= > ac_cv_env_GOC_FOR_TARGET_value= > ac_cv_env_LDFLAGS_set= > ac_cv_env_LDFLAGS_value= > ac_cv_env_LD_FOR_TARGET_set= > ac_cv_env_LD_FOR_TARGET_value= > ac_cv_env_LD_set= > ac_cv_env_LD_value= > ac_cv_env_LIBS_set= > ac_cv_env_LIBS_value= > ac_cv_env_LIPO_FOR_TARGET_set= > ac_cv_env_LIPO_FOR_TARGET_value= > ac_cv_env_LIPO_set= > ac_cv_env_LIPO_value= > ac_cv_env_NM_FOR_TARGET_set= > ac_cv_env_NM_FOR_TARGET_value= > ac_cv_env_NM_set= > ac_cv_env_NM_value= > ac_cv_env_OBJCOPY_FOR_TARGET_set= > ac_cv_env_OBJCOPY_FOR_TARGET_value= > ac_cv_env_OBJCOPY_set= > ac_cv_env_OBJCOPY_value= > ac_cv_env_OBJDUMP_FOR_TARGET_set= > ac_cv_env_OBJDUMP_FOR_TARGET_value= > ac_cv_env_OBJDUMP_set= > ac_cv_env_OBJDUMP_value= > ac_cv_env_OTOOL_FOR_TARGET_set= > ac_cv_env_OTOOL_FOR_TARGET_value= > ac_cv_env_OTOOL_set= > ac_cv_env_OTOOL_value= > ac_cv_env_RANLIB_FOR_TARGET_set= > ac_cv_env_RANLIB_FOR_TARGET_value= > ac_cv_env_RANLIB_set= > ac_cv_env_RANLIB_value= > ac_cv_env_READELF_FOR_TARGET_set= > ac_cv_env_READELF_FOR_TARGET_value= > ac_cv_env_READELF_set= > ac_cv_env_READELF_value= > ac_cv_env_STRIP_FOR_TARGET_set= > ac_cv_env_STRIP_FOR_TARGET_value= > ac_cv_env_STRIP_set= > ac_cv_env_STRIP_value= > ac_cv_env_WINDMC_FOR_TARGET_set= > ac_cv_env_WINDMC_FOR_TARGET_value= > ac_cv_env_WINDMC_set= > ac_cv_env_WINDMC_value= > ac_cv_env_WINDRES_FOR_TARGET_set= > ac_cv_env_WINDRES_FOR_TARGET_value= > ac_cv_env_WINDRES_set= > ac_cv_env_WINDRES_value= > ac_cv_env_build_alias_set=set > ac_cv_env_build_alias_value=x86_64-cross-linux-gnu > ac_cv_env_build_configargs_set= > ac_cv_env_build_configargs_value= > ac_cv_env_host_alias_set=set > ac_cv_env_host_alias_value=x86_64-cross-linux-gnu > ac_cv_env_host_configargs_set= > ac_cv_env_host_configargs_value= > ac_cv_env_target_alias_set=set > ac_cv_env_target_alias_value=arm-linux-musleabihf > ac_cv_env_target_configargs_set= > ac_cv_env_target_configargs_value= > ac_cv_host=x86_64-cross-linux-gnu > ac_cv_objext=o > ac_cv_path_AR_FOR_TARGET=/mnt/clfs/cross-tools/arm-linux-musleabihf/bin/ar > ac_cv_path_AS_FOR_TARGET=/mnt/clfs/cross-tools/arm-linux-musleabihf/bin/as > ac_cv_path_LD_FOR_TARGET=/mnt/clfs/cross-tools/arm-linux-musleabihf/bin/ld > ac_cv_path_NM_FOR_TARGET=/mnt/clfs/cross-tools/arm-linux-musleabihf/bin/nm > ac_cv_path_OBJCOPY_FOR_TARGET=/mnt/clfs/cross-tools/arm-linux-musleabihf/bin/objcopy > ac_cv_path_OBJDUMP_FOR_TARGET=/mnt/clfs/cross-tools/arm-linux-musleabihf/bin/objdump > ac_cv_path_RANLIB_FOR_TARGET=/mnt/clfs/cross-tools/arm-linux-musleabihf/bin/ranlib > ac_cv_path_READELF_FOR_TARGET=/mnt/clfs/cross-tools/arm-linux-musleabihf/bin/readelf > ac_cv_path_SED=/bin/sed > ac_cv_path_STRIP_FOR_TARGET=/mnt/clfs/cross-tools/arm-linux-musleabihf/bin/strip > ac_cv_path_install='/bin/install -c' > ac_cv_prog_AR=ar > ac_cv_prog_AS=as > ac_cv_prog_AWK=gawk > ac_cv_prog_BISON=bison > ac_cv_prog_EXPECT=expect > ac_cv_prog_FLEX=flex > ac_cv_prog_LD=ld > ac_cv_prog_LEX=flex > ac_cv_prog_M4=m4 > ac_cv_prog_MAKEINFO=makeinfo > ac_cv_prog_NM=nm > ac_cv_prog_OBJCOPY=objcopy > ac_cv_prog_OBJDUMP=objdump > ac_cv_prog_RANLIB=ranlib > ac_cv_prog_READELF=readelf > ac_cv_prog_STRIP=strip > ac_cv_prog_YACC='bison -y' > ac_cv_prog_ac_ct_CC=gcc > ac_cv_prog_ac_ct_CXX=g++ > ac_cv_prog_cc_c89= > ac_cv_prog_cc_g=yes > ac_cv_prog_cxx_g=yes > ac_cv_target=arm-unknown-linux-musleabihf > acx_cv_cc_gcc_supports_ada=no > acx_cv_prog_LN=ln > gcc_cv_isl=no > gcc_cv_prog_cmp_skip='cmp --ignore-initial=16 $$f1 $$f2' > gcc_cv_tool_dirs=/mnt/clfs/cross-tools/libexec/gcc/arm-linux-musleabihf/9.2.0:/mnt/clfs/cross-tools/libexec/gcc/arm-linux-musleabihf:/usr/lib/gcc/arm-linux-musleabihf/9.2.0:/usr/lib/gcc/arm-linux-musleabihf:/mnt/clfs/cross-tools/arm-linux-musleabihf/bin/arm-linux-musleabihf/9.2.0:/mnt/clfs/cross-tools/arm-linux-musleabihf/bin: > gcc_cv_tool_prefix=/mnt/clfs/cross-tools > lt_cv_objdir=.libs > > ## ----------------- ## > ## Output variables. ## > ## ----------------- ## > > AR='ar' > AR_FOR_BUILD='$(AR)' > AR_FOR_TARGET='/mnt/clfs/cross-tools/arm-linux-musleabihf/bin/ar' > AS='as' > AS_FOR_BUILD='$(AS)' > AS_FOR_TARGET='/mnt/clfs/cross-tools/arm-linux-musleabihf/bin/as' > AWK='gawk' > BISON='bison' > BUILD_CONFIG='' > CC='gcc' > CC_FOR_BUILD='$(CC)' > CC_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/xgcc -B$$r/$(HOST_SUBDIR)/gcc/' > CFLAGS='-g -O2' > CFLAGS_FOR_BUILD='-g -O2' > CFLAGS_FOR_TARGET='-g -O2' > COMPILER_AS_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/as' > COMPILER_LD_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/collect-ld' > COMPILER_NM_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/nm' > CONFIGURE_GDB_TK='' > CPPFLAGS='' > CXX='g++' > CXXFLAGS='-g -O2' > CXXFLAGS_FOR_BUILD='-g -O2' > CXXFLAGS_FOR_TARGET='-g -O2' > CXX_FOR_BUILD='$(CXX)' > CXX_FOR_TARGET='arm-linux-musleabihf-c++' > DEBUG_PREFIX_CFLAGS_FOR_TARGET='' > DEFS='-DPACKAGE_NAME=\"\" -DPACKAGE_TARNAME=\"\" -DPACKAGE_VERSION=\"\" -DPACKAGE_STRING=\"\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE_URL=\"\" -DLT_OBJDIR=\".libs/\"' > DLLTOOL='dlltool' > DLLTOOL_FOR_BUILD='$(DLLTOOL)' > DLLTOOL_FOR_TARGET='arm-linux-musleabihf-dlltool' > ECHO_C='' > ECHO_N='-n' > ECHO_T='' > EXEEXT='' > EXPECT='expect' > FLAGS_FOR_TARGET=' -B$(build_tooldir)/bin/ -B$(build_tooldir)/lib/ -isystem $(build_tooldir)/include -isystem $(build_tooldir)/sys-include' > FLEX='flex' > GCC_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/xgcc -B$$r/$(HOST_SUBDIR)/gcc/' > GCC_SHLIB_SUBDIR='' > GDB_TK='' > GDC_FOR_BUILD='$(GDC)' > GDC_FOR_TARGET='arm-linux-musleabihf-gdc' > GFORTRAN_FOR_BUILD='$(GFORTRAN)' > GFORTRAN_FOR_TARGET='arm-linux-musleabihf-gfortran' > GNATBIND='no' > GNATMAKE='no' > GOC_FOR_BUILD='$(GOC)' > GOC_FOR_TARGET='arm-linux-musleabihf-gccgo' > INSTALL_DATA='${INSTALL} -m 644' > INSTALL_GDB_TK='' > INSTALL_PROGRAM='${INSTALL}' > INSTALL_SCRIPT='${INSTALL}' > LD='ld' > LDFLAGS='' > LDFLAGS_FOR_BUILD='' > LDFLAGS_FOR_TARGET='' > LD_FOR_BUILD='$(LD)' > LD_FOR_TARGET='/mnt/clfs/cross-tools/arm-linux-musleabihf/bin/ld' > LEX='flex' > LIBOBJS='' > LIBS='' > LIPO='lipo' > LIPO_FOR_TARGET='arm-linux-musleabihf-lipo' > LN='ln' > LN_S='ln -s' > LTLIBOBJS='' > M4='m4' > MAINT='#' > MAINTAINER_MODE_FALSE='' > MAINTAINER_MODE_TRUE='#' > MAKEINFO='makeinfo' > NM='nm' > NM_FOR_BUILD='$(NM)' > NM_FOR_TARGET='/mnt/clfs/cross-tools/arm-linux-musleabihf/bin/nm' > OBJCOPY='objcopy' > OBJCOPY_FOR_TARGET='/mnt/clfs/cross-tools/arm-linux-musleabihf/bin/objcopy' > OBJDUMP='objdump' > OBJDUMP_FOR_TARGET='/mnt/clfs/cross-tools/arm-linux-musleabihf/bin/objdump' > OBJEXT='o' > OTOOL='otool' > OTOOL_FOR_TARGET='arm-linux-musleabihf-otool' > PACKAGE_BUGREPORT='' > PACKAGE_NAME='' > PACKAGE_STRING='' > PACKAGE_TARNAME='' > PACKAGE_URL='' > PACKAGE_VERSION='' > PATH_SEPARATOR=':' > RANLIB='ranlib' > RANLIB_FOR_BUILD='$(RANLIB)' > RANLIB_FOR_TARGET='/mnt/clfs/cross-tools/arm-linux-musleabihf/bin/ranlib' > RAW_CXX_FOR_TARGET='arm-linux-musleabihf-c++' > READELF='readelf' > READELF_FOR_TARGET='/mnt/clfs/cross-tools/arm-linux-musleabihf/bin/readelf' > RPATH_ENVVAR='LD_LIBRARY_PATH' > RUNTEST='runtest' > SED='/bin/sed' > SHELL='/bin/bash' > STRIP='strip' > STRIP_FOR_TARGET='/mnt/clfs/cross-tools/arm-linux-musleabihf/bin/strip' > SYSROOT_CFLAGS_FOR_TARGET='' > TOPLEVEL_CONFIGURE_ARGUMENTS='../gcc-9.2.0/configure --prefix=/mnt/clfs/cross-tools --build=x86_64-cross-linux-gnu --host=x86_64-cross-linux-gnu --target=arm-linux-musleabihf --with-sysroot=/mnt/clfs/cross-tools/arm-linux-musleabihf --disable-nls --disable-shared --without-headers --with-newlib --disable-decimal-float --disable-libgomp --disable-libmudflap --disable-libssp --disable-libatomic --disable-libquadmath --disable-threads --enable-languages=c --enable-multilib --with-mpfr-include=/mnt/clfs/sources/gcc-build/../gcc-9.2.0/mpfr/src --with-mpfr-lib=/mnt/clfs/sources/gcc-build/mpfr/src/.libs --with-multilib-list=rmprofile' > WINDMC='windmc' > WINDMC_FOR_BUILD='$(WINDMC)' > WINDMC_FOR_TARGET='arm-linux-musleabihf-windmc' > WINDRES='windres' > WINDRES_FOR_BUILD='$(WINDRES)' > WINDRES_FOR_TARGET='arm-linux-musleabihf-windres' > YACC='bison -y' > ac_ct_CC='gcc' > ac_ct_CXX='g++' > bindir='${exec_prefix}/bin' > build='x86_64-cross-linux-gnu' > build_alias='x86_64-cross-linux-gnu' > build_configargs=' --cache-file=./config.cache '\''--prefix=/mnt/clfs/cross-tools'\'' '\''--with-sysroot=/mnt/clfs/cross-tools/arm-linux-musleabihf'\'' '\''--disable-nls'\'' '\''--disable-shared'\'' '\''--without-headers'\'' '\''--with-newlib'\'' '\''--disable-decimal-float'\'' '\''--disable-libgomp'\'' '\''--disable-libmudflap'\'' '\''--disable-libssp'\'' '\''--disable-libatomic'\'' '\''--disable-libquadmath'\'' '\''--disable-threads'\'' '\''--enable-multilib'\'' '\''--with-mpfr-include=/mnt/clfs/sources/gcc-build/../gcc-9.2.0/mpfr/src'\'' '\''--with-mpfr-lib=/mnt/clfs/sources/gcc-build/mpfr/src/.libs'\'' '\''--with-multilib-list=rmprofile'\'' '\''--enable-languages=c,lto'\'' --program-transform-name='\''s&^&arm-linux-musleabihf-&'\'' --disable-option-checking' > build_configdirs=' libiberty libcpp fixincludes' > build_cpu='x86_64' > build_libsubdir='build-x86_64-cross-linux-gnu' > build_noncanonical='x86_64-cross-linux-gnu' > build_os='linux-gnu' > build_subdir='build-x86_64-cross-linux-gnu' > build_tooldir='${exec_prefix}/arm-linux-musleabihf' > build_vendor='cross' > compare_exclusions='gcc/cc*-checksum$(objext) | gcc/ada/*tools/*' > configdirs=' intl libiberty zlib libbacktrace libcpp libdecnumber gmp mpfr mpc fixincludes gcc libcc1 lto-plugin' > datadir='${datarootdir}' > datarootdir='${prefix}/share' > do_compare='cmp --ignore-initial=16 $$f1 $$f2' > docdir='${datarootdir}/doc/${PACKAGE}' > dvidir='${docdir}' > exec_prefix='${prefix}' > extra_host_libiberty_configure_flags='--enable-shared' > extra_host_zlib_configure_flags='' > extra_isl_gmp_configure_flags='--with-gmp-builddir=$$r/$(HOST_SUBDIR)/gmp' > extra_liboffloadmic_configure_flags='' > extra_linker_plugin_configure_flags='' > extra_linker_plugin_flags='' > extra_mpc_gmp_configure_flags='--with-gmp-include=$$r/$(HOST_SUBDIR)/gmp --with-gmp-lib=$$r/$(HOST_SUBDIR)/gmp/.libs' > extra_mpc_mpfr_configure_flags='' > extra_mpfr_configure_flags='--with-gmp-include=$$r/$(HOST_SUBDIR)/gmp --with-gmp-lib=$$r/$(HOST_SUBDIR)/gmp/.libs' > get_gcc_base_ver='cat' > gmpinc='-I$$r/$(HOST_SUBDIR)/gmp -I$$s/gmp -I/mnt/clfs/sources/gcc-build/../gcc-9.2.0/mpfr/src -I$$s/mpc/src ' > gmplibs='-L$$r/$(HOST_SUBDIR)/gmp/.libs -L/mnt/clfs/sources/gcc-build/mpfr/src/.libs -L$$r/$(HOST_SUBDIR)/mpc/src/.libs -lmpc -lmpfr -lgmp' > host='x86_64-cross-linux-gnu' > host_alias='x86_64-cross-linux-gnu' > host_configargs=' --cache-file=./config.cache '\''--prefix=/mnt/clfs/cross-tools'\'' '\''--with-sysroot=/mnt/clfs/cross-tools/arm-linux-musleabihf'\'' '\''--disable-nls'\'' '\''--disable-shared'\'' '\''--without-headers'\'' '\''--with-newlib'\'' '\''--disable-decimal-float'\'' '\''--disable-libgomp'\'' '\''--disable-libmudflap'\'' '\''--disable-libssp'\'' '\''--disable-libatomic'\'' '\''--disable-libquadmath'\'' '\''--disable-threads'\'' '\''--enable-multilib'\'' '\''--with-mpfr-include=/mnt/clfs/sources/gcc-build/../gcc-9.2.0/mpfr/src'\'' '\''--with-mpfr-lib=/mnt/clfs/sources/gcc-build/mpfr/src/.libs'\'' '\''--with-multilib-list=rmprofile'\'' '\''--enable-languages=c,lto'\'' --program-transform-name='\''s&^&arm-linux-musleabihf-&'\'' --disable-option-checking' > host_cpu='x86_64' > host_noncanonical='x86_64-cross-linux-gnu' > host_os='linux-gnu' > host_shared='no' > host_subdir='.' > host_vendor='cross' > htmldir='${docdir}' > includedir='${prefix}/include' > infodir='${datarootdir}/info' > islinc='' > isllibs='' > libdir='${exec_prefix}/lib' > libexecdir='${exec_prefix}/libexec' > localedir='${datarootdir}/locale' > localstatedir='${prefix}/var' > mandir='${datarootdir}/man' > oldincludedir='/usr/include' > pdfdir='${docdir}' > poststage1_ldflags='-static-libstdc++ -static-libgcc' > poststage1_libs='' > prefix='/mnt/clfs/cross-tools' > program_transform_name='s&^&arm-linux-musleabihf-&' > psdir='${docdir}' > sbindir='${exec_prefix}/sbin' > sharedstatedir='${prefix}/com' > stage1_cflags='-g' > stage1_checking='--enable-checking=yes,types' > stage1_languages='c,lto' > stage1_ldflags='-static-libstdc++ -static-libgcc' > stage1_libs='' > stage2_werror_flag='' > sysconfdir='${prefix}/etc' > target='arm-unknown-linux-musleabihf' > target_alias='arm-linux-musleabihf' > target_configargs='--cache-file=./config.cache --with-cross-host=x86_64-cross-linux-gnu '\''--prefix=/mnt/clfs/cross-tools'\'' '\''--with-sysroot=/mnt/clfs/cross-tools/arm-linux-musleabihf'\'' '\''--disable-nls'\'' '\''--disable-shared'\'' '\''--without-headers'\'' '\''--with-newlib'\'' '\''--disable-decimal-float'\'' '\''--disable-libgomp'\'' '\''--disable-libmudflap'\'' '\''--disable-libssp'\'' '\''--disable-libatomic'\'' '\''--disable-libquadmath'\'' '\''--disable-threads'\'' '\''--enable-multilib'\'' '\''--with-multilib-list=rmprofile'\'' '\''--enable-languages=c,lto'\'' --program-transform-name='\''s&^&arm-linux-musleabihf-&'\'' --disable-option-checking' > target_configdirs=' libgcc' > target_cpu='arm' > target_noncanonical='arm-linux-musleabihf' > target_os='linux-musleabihf' > target_subdir='arm-linux-musleabihf' > target_vendor='unknown' > tooldir='${exec_prefix}/arm-linux-musleabihf' > > ## ------------------- ## > ## File substitutions. ## > ## ------------------- ## > > alphaieee_frag='/dev/null' > host_makefile_frag='/dev/null' > ospace_frag='/dev/null' > serialization_dependencies='serdep.tmp' > target_makefile_frag='../gcc-9.2.0/config/mt-gnu' > > ## ----------- ## > ## confdefs.h. ## > ## ----------- ## > > /* confdefs.h */ > #define PACKAGE_NAME "" > #define PACKAGE_TARNAME "" > #define PACKAGE_VERSION "" > #define PACKAGE_STRING "" > #define PACKAGE_BUGREPORT "" > #define PACKAGE_URL "" > #define LT_OBJDIR ".libs/" > > configure: exit 0 > > What could be the problem? > --------------------------------------------------------------- > On Mon, Nov 11, 2019 at 01:42:43PM +0000, Richard Earnshaw (lists) wrote: >> On 11/11/2019 13:33, sayed israr wrote: >>> ---------- Forwarded message --------- >>> From: Israr Sayed <sd.israr@gmail.com> >>> Date: Mon, Nov 11, 2019 at 5:38 PM >>> Subject: Re: Is it possible to build Single GCC Executable for armv5, >>> armv6, armv7-{cortex-xx-{A,R,M}},armv8 etc.? >>> To: Jonathan Wakely <jwakely.gcc@gmail.com> >>> >>> >>> I am building GCC from sources.Where i can configure it with 2 ways: >>> (1) --with-arch --with-cpu --with-fpu --with-float options . >>> (2) --with-multilib-list= . >>> In --with-multilib-list, we can configure for various combinations of >>> armv*-*-*. >>> For example, I want to build gcc for with arch = armv7, armv7-m, armv7e-m, >>> with float = hard, softfp, soft. >>> with fpu = fpv, fpv4, fpv4-d16 etc.. >>> whereas if in configure i mention --with-arch --with-fpu --with-float.That >>> will build GCC for those options only. >>> I have a prebuilt arm GCC binary for STM32F controllers, which is built for >>> whole range of armv7-M, armv7e-m along with FPUs. >>> there configure options show --with-multilib-list=rmprofile. >>> rmprofile is the multilib option for configure.Which is exactly what >>> gcc/config/arm/t-rmprofile file is about. >>> I hope i can explain my question better. >> >> You can configure the compiler with --with-multlib-list=xxx >> >> where xxx is any of "aprofile", "rmprofile" and "aprofile,rmprofile" >> >> If you do this, DO NOT specify any of --with-fpu, --with-cpu, --with-tune or >> --with-arch. >> >> Be warned, the full set of multilibs is LARGE. It requires a fast machine >> and/or a lot of time to build them all. >> >> You can, of course, edit any of the files - the GPL gives you that right, >> but if you do so, you're most likely on your own. The multilib >> configurations are complex and rely heavily on GNU Makefile trickery to >> express all the required combinations. >> >> R. >> >>> ------------------------------------------------------ >>> >>> On Mon, Nov 11, 2019 at 11:40:39AM +0000, Jonathan Wakely wrote: >>>> On Sun, 10 Nov 2019 at 11:36, Israr Sayed <sd.israr@gmail.com> wrote: >>>>> >>>>> Digging into the sources of GCC I noticed in files gcc/config/arm/t-*, >>> There are multiple arm target options. >>>>> >>>>> Reading [GCC internal Manual], These are called Target Makefile >>> Fragments, which will be included in main Makefile, like MULTILIB_OPTIONS, >>> MULTILIB_DIRNAMES, MULTILIB_MATCHES, MULTILIB_REQUIRED, MULTILIB_REUSE, >>> MULTILIB_EXTRA_OPTS, MULTILIB_OSDIRNAMES, MULTIARCH_DIRNAME. >>>>> >>>>> What I am not able to understand that how to bring it in at the time of >>> configure.Which option to choose? >>>>> >>>>> More over is it possible to edit those t-* files as per the requirement >>> and how? >>>>> Please Help. >>>> >>>> I don't understand your question. Your email's subject talks about a >>>> single GCC executable for multiple ARM variants, which is supported >>>> automatically. When you configure GCC for an ARM target you can select >>>> the specific processor type using the -march and/or -mcpu options. See >>>> the documentation of command-line options in the GCC manual. >>>> >>>> You don't need to do anything special to use the target makefile >>>> fragments, they're used automatically, as needed. >> ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: Fwd: Is it possible to build Single GCC Executable for armv5, armv6, armv7-{cortex-xx-{A,R,M}},armv8 etc.? 2019-11-12 10:01 ` Richard Earnshaw (lists) @ 2019-11-16 23:07 ` Israr Sayed 2019-11-18 15:53 ` Richard Earnshaw (lists) 0 siblings, 1 reply; 9+ messages in thread From: Israr Sayed @ 2019-11-16 23:07 UTC (permalink / raw) To: Richard Earnshaw (lists); +Cc: gcc-help On Tue, Nov 12, 2019 at 10:00:08AM +0000, Richard Earnshaw (lists) wrote: > On 11/11/2019 17:49, Israr Sayed wrote: > > As per your instructions i tried to build the GCC.I got the following errors: > > /mnt/clfs/sources/gcc-build/./gcc/xgcc -B/mnt/clfs/sources/gcc-build/./gcc/ -B/mnt/clfs/cross-tools/arm-linux-musleabihf/bin/ -B/mnt/clfs/cross-tools/arm-linux-musleabihf/lib/ -isystem /mnt/clfs/cross-tools/arm-linux-musleabihf/include -isystem /mnt/clfs/cross-tools/arm-linux-musleabihf/sys-include -g -O2 -mthumb -march=armv6s-m -mfloat-abi=soft -O2 -g -O2 -DIN_GCC -DCROSS_DIRECTORY_STRUCTURE -W -Wall -Wno-narrowing -Wwrite-strings -Wcast-qual -Wstrict-prototypes -Wmissing-prototypes -Wold-style-definition -isystem ./include -fPIC -fno-inline -g -DIN_LIBGCC2 -fbuilding-libgcc -fno-stack-protector -Dinhibit_libc -fPIC -fno-inline -I. -I. -I../../../../.././gcc -I../../../../../../gcc-9.2.0/libgcc -I../../../../../../gcc-9.2.0/libgcc/. -I../../../../../../gcc-9.2.0/libgcc/../gcc -I../../../../../../gcc-9.2.0/libgcc/../include -DHAVE_CC_TLS -o _dvmd_lnx_s.o -MT _dvmd_lnx_s.o -MD -MP -MF _dvmd_lnx_s.dep -DSHARED -DL_dvmd_lnx -xassembler-with-cpp -c ../../../../../../gcc-9.2.0/libgcc/config/arm/lib1funcs.S > > ../../../../../../gcc-9.2.0/libgcc/config/arm/lib1funcs.S: Assembler messages: > > ../../../../../../gcc-9.2.0/libgcc/config/arm/lib1funcs.S:1482: Error: bad instruction `arm_func_start aeabi_idiv0' > > ../../../../../../gcc-9.2.0/libgcc/config/arm/lib1funcs.S:1483: Error: bad instruction `arm_func_start aeabi_ldiv0' > > ../../../../../../gcc-9.2.0/libgcc/config/arm/lib1funcs.S:1484: Error: selected processor does not support `stmfd sp!,{r1,lr}' in Thumb mode > > ../../../../../../gcc-9.2.0/libgcc/config/arm/lib1funcs.S:1495: Error: lo register required -- `ldmia sp!,{r1,pc}' > > ../../../../../../gcc-9.2.0/libgcc/config/arm/lib1funcs.S:1485: Error: invalid operands (.text and *UND* sections) for `-' > > ../../../../../../gcc-9.2.0/libgcc/config/arm/lib1funcs.S:1479: Error: can't resolve `.text' {.text section} - `__aeabi_ldiv0' {*UND* section} > > /tmp/cc0Si52Z.s: Error: .size expression for __aeabi_ldiv0 does not evaluate to a constant > > /tmp/cc0Si52Z.s: Error: .size expression for __aeabi_idiv0 does not evaluate to a constant > > make[3]: *** [Makefile:488: _dvmd_lnx_s.o] Error 1 > > make[3]: Leaving directory '/mnt/clfs/sources/gcc-build/arm-linux-musleabihf/thumb/v6-m/nofp/libgcc' > > make[2]: *** [Makefile:1210: multi-do] Error 1 > > make[2]: Leaving directory '/mnt/clfs/sources/gcc-build/arm-linux-musleabihf/libgcc' > > make[1]: *** [Makefile:127: all-multi] Error 2 > > make[1]: Leaving directory '/mnt/clfs/sources/gcc-build/arm-linux-musleabihf/libgcc' > > make: *** [Makefile:12499: all-target-libgcc] Error 2 > > ---------------------------------------------------------- > > Config.log: > > This file contains any messages produced by compilers while > > running configure, to aid debugging if configure makes a mistake. > > > > It was created by configure, which was > > generated by GNU Autoconf 2.69. Invocation command line was > > > > $ ../gcc-9.2.0/configure --prefix=/mnt/clfs/cross-tools --build=x86_64-cross-linux-gnu --host=x86_64-cross-linux-gnu --target=arm-linux-musleabihf --with-sysroot=/mnt/clfs/cross-tools/arm-linux-musleabihf --disable-nls --disable-shared --without-headers --with-newlib --disable-decimal-float --disable-libgomp --disable-libmudflap --disable-libssp --disable-libatomic --disable-libquadmath --disable-threads --enable-languages=c --enable-multilib --with-mpfr-include=/mnt/clfs/sources/gcc-build/../gcc-9.2.0/mpfr/src --with-mpfr-lib=/mnt/clfs/sources/gcc-build/mpfr/src/.libs --with-multilib-list=rmprofile > > > > Sorry, I should have said that these multilib configs have only been tested > with bare metal tools (arm-none-eabi). The error you are seeing is because > the Linux configurations assume that the Arm instruction set exists and on > M-profile devices this is not true. > > Standard linux configurations also assume the presence of an MMU and no > M-profile devices support this. > > R. > So, both the 2 conditions i.e. ARM Instructions Set and presence of MMU, M and R Profile devices Lack. Onyly ARMv7-A Profile Devices have both the capabilities. So, My Question is ,Is it then possible to build the GCC with Multilib for A Profile devices, Using --with-multilib-list=aprofile ? > > ## --------- ## > > ## Platform. ## > > ## --------- ## > > > > hostname = hib > > uname -m = x86_64 > > uname -r = 5.3.0-19-generic > > uname -s = Linux > > uname -v = #20-Ubuntu SMP Fri Oct 18 09:04:39 UTC 2019 > > > > /usr/bin/uname -p = x86_64 > > /bin/uname -X = unknown > > > > /bin/arch = x86_64 > > /usr/bin/arch -k = unknown > > /usr/convex/getsysinfo = unknown > > /usr/bin/hostinfo = unknown > > /bin/machine = unknown > > /usr/bin/oslevel = unknown > > /bin/universe = unknown > > > > PATH: /mnt/clfs/cross-tools/bin > > PATH: /bin > > PATH: /usr/bin > > > > > > ## ----------- ## > > ## Core tests. ## > > ## ----------- ## > > > > configure:2348: checking build system type > > configure:2362: result: x86_64-cross-linux-gnu > > configure:2409: checking host system type > > configure:2422: result: x86_64-cross-linux-gnu > > configure:2442: checking target system type > > configure:2455: result: arm-unknown-linux-musleabihf > > configure:2509: checking for a BSD-compatible install > > configure:2577: result: /bin/install -c > > configure:2588: checking whether ln works > > configure:2610: result: yes > > configure:2614: checking whether ln -s works > > configure:2618: result: yes > > configure:2625: checking for a sed that does not truncate output > > configure:2689: result: /bin/sed > > configure:2698: checking for gawk > > configure:2714: found /bin/gawk > > configure:2725: result: gawk > > configure:3257: checking for libitm support > > configure:3267: result: yes > > configure:3276: checking for libsanitizer support > > configure:3286: result: yes > > configure:3295: checking for libvtv support > > configure:3305: result: yes > > configure:3315: checking for libhsail-rt support > > configure:3321: result: no > > configure:3406: checking for libphobos support > > configure:3416: result: yes > > configure:4036: checking for x86_64-cross-linux-gnu-gcc > > configure:4066: result: no > > configure:4076: checking for gcc > > configure:4092: found /bin/gcc > > configure:4103: result: gcc > > configure:4332: checking for C compiler version > > configure:4341: gcc --version >&5 > > gcc (Ubuntu 9.2.1-9ubuntu2) 9.2.1 20191008 > > Copyright (C) 2019 Free Software Foundation, Inc. > > This is free software; see the source for copying conditions. There is NO > > warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. > > > > configure:4352: $? = 0 > > configure:4341: gcc -v >&5 > > Using built-in specs. > > COLLECT_GCC=gcc > > COLLECT_LTO_WRAPPER=/usr/lib/gcc/x86_64-linux-gnu/9/lto-wrapper > > OFFLOAD_TARGET_NAMES=nvptx-none:hsa > > OFFLOAD_TARGET_DEFAULT=1 > > Target: x86_64-linux-gnu > > Configured with: ../src/configure -v --with-pkgversion='Ubuntu 9.2.1-9ubuntu2' --with-bugurl=file:///usr/share/doc/gcc-9/README.Bugs --enable-languages=c,ada,c++,go,brig,d,fortran,objc,obj-c++,gm2 --prefix=/usr --with-gcc-major-version-only --program-suffix=-9 --program-prefix=x86_64-linux-gnu- --enable-shared --enable-linker-build-id --libexecdir=/usr/lib --without-included-gettext --enable-threads=posix --libdir=/usr/lib --enable-nls --enable-bootstrap --enable-clocale=gnu --enable-libstdcxx-debug --enable-libstdcxx-time=yes --with-default-libstdcxx-abi=new --enable-gnu-unique-object --disable-vtable-verify --enable-plugin --enable-default-pie --with-system-zlib --with-target-system-zlib=auto --enable-multiarch --disable-werror --with-arch-32=i686 --with-abi=m64 --with-multilib-list=m32,m64,mx32 --enable-multilib --with-tune=generic --enable-offload-targets=nvptx-none,hsa --without-cuda-driver --enable-checking=release --build=x86_64-linux-gnu --host=x86_64-linux-gnu --target=x86_64-linux-gnu > > Thread model: posix > > gcc version 9.2.1 20191008 (Ubuntu 9.2.1-9ubuntu2) > > configure:4352: $? = 0 > > configure:4341: gcc -V >&5 > > gcc: error: unrecognized command line option '-V' > > gcc: fatal error: no input files > > compilation terminated. > > configure:4352: $? = 1 > > configure:4341: gcc -qversion >&5 > > gcc: error: unrecognized command line option '-qversion'; did you mean '--version'? > > gcc: fatal error: no input files > > compilation terminated. > > configure:4352: $? = 1 > > configure:4372: checking whether the C compiler works > > configure:4394: gcc conftest.c >&5 > > configure:4398: $? = 0 > > configure:4446: result: yes > > configure:4449: checking for C compiler default output file name > > configure:4451: result: a.out > > configure:4457: checking for suffix of executables > > configure:4464: gcc -o conftest conftest.c >&5 > > configure:4468: $? = 0 > > configure:4490: result: > > configure:4512: checking whether we are cross compiling > > configure:4520: gcc -o conftest conftest.c >&5 > > configure:4524: $? = 0 > > configure:4531: ./conftest > > configure:4535: $? = 0 > > configure:4523: result: no > > configure:4528: checking for suffix of object files > > configure:4550: gcc -c conftest.c >&5 > > configure:4554: $? = 0 > > configure:4575: result: o > > configure:4579: checking whether we are using the GNU C compiler > > configure:4598: gcc -c conftest.c >&5 > > configure:4598: $? = 0 > > configure:4607: result: yes > > configure:4616: checking whether gcc accepts -g > > configure:4636: gcc -c -g conftest.c >&5 > > configure:4636: $? = 0 > > configure:4677: result: yes > > configure:4694: checking for gcc option to accept ISO C89 > > configure:4757: gcc -c -g -O2 conftest.c >&5 > > configure:4757: $? = 0 > > configure:4770: result: none needed > > configure:4804: checking for x86_64-cross-linux-gnu-g++ > > configure:4834: result: no > > configure:4804: checking for x86_64-cross-linux-gnu-c++ > > configure:4834: result: no > > configure:4804: checking for x86_64-cross-linux-gnu-gpp > > configure:4834: result: no > > configure:4804: checking for x86_64-cross-linux-gnu-aCC > > configure:4834: result: no > > configure:4804: checking for x86_64-cross-linux-gnu-CC > > configure:4834: result: no > > configure:4804: checking for x86_64-cross-linux-gnu-cxx > > configure:4834: result: no > > configure:4804: checking for x86_64-cross-linux-gnu-cc++ > > configure:4834: result: no > > configure:4804: checking for x86_64-cross-linux-gnu-cl.exe > > configure:4834: result: no > > configure:4804: checking for x86_64-cross-linux-gnu-FCC > > configure:4834: result: no > > configure:4804: checking for x86_64-cross-linux-gnu-KCC > > configure:4834: result: no > > configure:4804: checking for x86_64-cross-linux-gnu-RCC > > configure:4834: result: no > > configure:4804: checking for x86_64-cross-linux-gnu-xlC_r > > configure:4834: result: no > > configure:4804: checking for x86_64-cross-linux-gnu-xlC > > configure:4834: result: no > > configure:4848: checking for g++ > > configure:4864: found /bin/g++ > > configure:4875: result: g++ > > configure:4902: checking for C++ compiler version > > configure:4911: g++ --version >&5 > > g++ (Ubuntu 9.2.1-9ubuntu2) 9.2.1 20191008 > > Copyright (C) 2019 Free Software Foundation, Inc. > > This is free software; see the source for copying conditions. There is NO > > warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. > > > > configure:4922: $? = 0 > > configure:4911: g++ -v >&5 > > Using built-in specs. > > COLLECT_GCC=g++ > > COLLECT_LTO_WRAPPER=/usr/lib/gcc/x86_64-linux-gnu/9/lto-wrapper > > OFFLOAD_TARGET_NAMES=nvptx-none:hsa > > OFFLOAD_TARGET_DEFAULT=1 > > Target: x86_64-linux-gnu > > Configured with: ../src/configure -v --with-pkgversion='Ubuntu 9.2.1-9ubuntu2' --with-bugurl=file:///usr/share/doc/gcc-9/README.Bugs --enable-languages=c,ada,c++,go,brig,d,fortran,objc,obj-c++,gm2 --prefix=/usr --with-gcc-major-version-only --program-suffix=-9 --program-prefix=x86_64-linux-gnu- --enable-shared --enable-linker-build-id --libexecdir=/usr/lib --without-included-gettext --enable-threads=posix --libdir=/usr/lib --enable-nls --enable-bootstrap --enable-clocale=gnu --enable-libstdcxx-debug --enable-libstdcxx-time=yes --with-default-libstdcxx-abi=new --enable-gnu-unique-object --disable-vtable-verify --enable-plugin --enable-default-pie --with-system-zlib --with-target-system-zlib=auto --enable-multiarch --disable-werror --with-arch-32=i686 --with-abi=m64 --with-multilib-list=m32,m64,mx32 --enable-multilib --with-tune=generic --enable-offload-targets=nvptx-none,hsa --without-cuda-driver --enable-checking=release --build=x86_64-linux-gnu --host=x86_64-linux-gnu --target=x86_64-linux-gnu > > Thread model: posix > > gcc version 9.2.1 20191008 (Ubuntu 9.2.1-9ubuntu2) > > configure:4922: $? = 0 > > configure:4911: g++ -V >&5 > > g++: error: unrecognized command line option '-V' > > g++: fatal error: no input files > > compilation terminated. > > configure:4922: $? = 1 > > configure:4911: g++ -qversion >&5 > > g++: error: unrecognized command line option '-qversion'; did you mean '--version'? > > g++: fatal error: no input files > > compilation terminated. > > configure:4922: $? = 1 > > configure:4926: checking whether we are using the GNU C++ compiler > > configure:4945: g++ -c conftest.cpp >&5 > > configure:4945: $? = 0 > > configure:4954: result: yes > > configure:4963: checking whether g++ accepts -g > > configure:4983: g++ -c -g conftest.cpp >&5 > > configure:4983: $? = 0 > > configure:5024: result: yes > > configure:5073: checking whether g++ accepts -static-libstdc++ -static-libgcc > > configure:5090: g++ -o conftest -g -O2 -static-libstdc++ -static-libgcc conftest.cpp >&5 > > configure:5090: $? = 0 > > configure:5091: result: yes > > configure:5115: checking for x86_64-cross-linux-gnu-gnatbind > > configure:5145: result: no > > configure:5155: checking for gnatbind > > configure:5185: result: no > > configure:5207: checking for x86_64-cross-linux-gnu-gnatmake > > configure:5237: result: no > > configure:5247: checking for gnatmake > > configure:5277: result: no > > configure:5296: checking whether compiler driver understands Ada > > configure:5319: result: no > > configure:5328: checking how to compare bootstrapped objects > > configure:5353: result: cmp --ignore-initial=16 $$f1 $$f2 > > configure:5413: checking for objdir > > configure:5428: result: .libs > > configure:5976: checking for isl 0.15 or later > > configure:5989: gcc -o conftest -g -O2 -I$$r/$(HOST_SUBDIR)/gmp -I$$s/gmp -I/mnt/clfs/sources/gcc-build/../gcc-9.2.0/mpfr/src -I$$s/mpc/src -lisl -L$$r/$(HOST_SUBDIR)/gmp/.libs -L/mnt/clfs/sources/gcc-build/mpfr/src/.libs -L$$r/$(HOST_SUBDIR)/mpc/src/.libs -lmpc -lmpfr -lgmp conftest.c -lisl -lgmp >&5 > > conftest.c:10:10: fatal error: isl/schedule.h: No such file or directory > > 10 | #include <isl/schedule.h> > > | ^~~~~~~~~~~~~~~~ > > compilation terminated. > > configure:5989: $? = 1 > > configure: failed program was: > > | /* confdefs.h */ > > | #define PACKAGE_NAME "" > > | #define PACKAGE_TARNAME "" > > | #define PACKAGE_VERSION "" > > | #define PACKAGE_STRING "" > > | #define PACKAGE_BUGREPORT "" > > | #define PACKAGE_URL "" > > | #define LT_OBJDIR ".libs/" > > | /* end confdefs.h. */ > > | #include <isl/schedule.h> > > | int > > | main () > > | { > > | isl_options_set_schedule_serialize_sccs (NULL, 0); > > | ; > > | return 0; > > | } > > configure:5996: result: no > > configure:6000: result: required isl version is 0.15 or later > > configure:7093: checking for default BUILD_CONFIG > > configure:7125: result: > > configure:7130: checking for --enable-vtable-verify > > configure:7143: result: no > > configure:7744: checking for bison > > configure:7760: found /bin/bison > > configure:7771: result: bison -y > > configure:7791: checking for bison > > configure:7807: found /bin/bison > > configure:7818: result: bison > > configure:7838: checking for gm4 > > configure:7868: result: no > > configure:7838: checking for gnum4 > > configure:7868: result: no > > configure:7838: checking for m4 > > configure:7854: found /bin/m4 > > configure:7865: result: m4 > > configure:7885: checking for flex > > configure:7901: found /bin/flex > > configure:7912: result: flex > > configure:7933: checking for flex > > configure:7949: found /bin/flex > > configure:7960: result: flex > > configure:7980: checking for makeinfo > > configure:7996: found /bin/makeinfo > > configure:8007: result: makeinfo > > configure:8041: checking for expect > > configure:8057: found /bin/expect > > configure:8068: result: expect > > configure:8090: checking for runtest > > configure:8120: result: no > > configure:8196: checking for x86_64-cross-linux-gnu-ar > > configure:8226: result: no > > configure:8235: checking for ar > > configure:8251: found /bin/ar > > configure:8262: result: ar > > configure:8337: checking for x86_64-cross-linux-gnu-as > > configure:8367: result: no > > configure:8376: checking for as > > configure:8392: found /bin/as > > configure:8403: result: as > > configure:8478: checking for x86_64-cross-linux-gnu-dlltool > > configure:8508: result: no > > configure:8517: checking for dlltool > > configure:8547: result: no > > configure:8619: checking for x86_64-cross-linux-gnu-ld > > configure:8649: result: no > > configure:8658: checking for ld > > configure:8674: found /bin/ld > > configure:8685: result: ld > > configure:8760: checking for x86_64-cross-linux-gnu-lipo > > configure:8790: result: no > > configure:8799: checking for lipo > > configure:8829: result: no > > configure:8901: checking for x86_64-cross-linux-gnu-nm > > configure:8931: result: no > > configure:8940: checking for nm > > configure:8956: found /bin/nm > > configure:8967: result: nm > > configure:9042: checking for x86_64-cross-linux-gnu-ranlib > > configure:9072: result: no > > configure:9081: checking for ranlib > > configure:9097: found /bin/ranlib > > configure:9108: result: ranlib > > configure:9178: checking for x86_64-cross-linux-gnu-strip > > configure:9208: result: no > > configure:9217: checking for strip > > configure:9233: found /bin/strip > > configure:9244: result: strip > > configure:9314: checking for x86_64-cross-linux-gnu-windres > > configure:9344: result: no > > configure:9353: checking for windres > > configure:9383: result: no > > configure:9455: checking for x86_64-cross-linux-gnu-windmc > > configure:9485: result: no > > configure:9494: checking for windmc > > configure:9524: result: no > > configure:9596: checking for x86_64-cross-linux-gnu-objcopy > > configure:9626: result: no > > configure:9635: checking for objcopy > > configure:9651: found /bin/objcopy > > configure:9662: result: objcopy > > configure:9737: checking for x86_64-cross-linux-gnu-objdump > > configure:9767: result: no > > configure:9776: checking for objdump > > configure:9792: found /bin/objdump > > configure:9803: result: objdump > > configure:9878: checking for x86_64-cross-linux-gnu-otool > > configure:9908: result: no > > configure:9917: checking for otool > > configure:9947: result: no > > configure:10019: checking for x86_64-cross-linux-gnu-readelf > > configure:10049: result: no > > configure:10058: checking for readelf > > configure:10074: found /bin/readelf > > configure:10085: result: readelf > > configure:10199: checking for arm-linux-musleabihf-cc > > configure:10229: result: no > > configure:10199: checking for arm-linux-musleabihf-gcc > > configure:10229: result: no > > configure:10360: checking for arm-linux-musleabihf-c++ > > configure:10390: result: no > > configure:10360: checking for arm-linux-musleabihf-g++ > > configure:10390: result: no > > configure:10360: checking for arm-linux-musleabihf-cxx > > configure:10390: result: no > > configure:10360: checking for arm-linux-musleabihf-gxx > > configure:10390: result: no > > configure:10521: checking for arm-linux-musleabihf-gcc > > configure:10551: result: no > > configure:10677: checking for arm-linux-musleabihf-gfortran > > configure:10707: result: no > > configure:10838: checking for arm-linux-musleabihf-gccgo > > configure:10868: result: no > > configure:10999: checking for arm-linux-musleabihf-gdc > > configure:11029: result: no > > configure:11129: checking for ar > > configure:11147: found /mnt/clfs/cross-tools/arm-linux-musleabihf/bin/ar > > configure:11159: result: /mnt/clfs/cross-tools/arm-linux-musleabihf/bin/ar > > configure:11359: checking for as > > configure:11377: found /mnt/clfs/cross-tools/arm-linux-musleabihf/bin/as > > configure:11389: result: /mnt/clfs/cross-tools/arm-linux-musleabihf/bin/as > > configure:11589: checking for dlltool > > configure:11622: result: no > > configure:11700: checking for arm-linux-musleabihf-dlltool > > configure:11730: result: no > > configure:11819: checking for ld > > configure:11837: found /mnt/clfs/cross-tools/arm-linux-musleabihf/bin/ld > > configure:11849: result: /mnt/clfs/cross-tools/arm-linux-musleabihf/bin/ld > > configure:12049: checking for lipo > > configure:12082: result: no > > configure:12160: checking for arm-linux-musleabihf-lipo > > configure:12190: result: no > > configure:12279: checking for nm > > configure:12297: found /mnt/clfs/cross-tools/arm-linux-musleabihf/bin/nm > > configure:12309: result: /mnt/clfs/cross-tools/arm-linux-musleabihf/bin/nm > > configure:12509: checking for objcopy > > configure:12527: found /mnt/clfs/cross-tools/arm-linux-musleabihf/bin/objcopy > > configure:12539: result: /mnt/clfs/cross-tools/arm-linux-musleabihf/bin/objcopy > > configure:12739: checking for objdump > > configure:12757: found /mnt/clfs/cross-tools/arm-linux-musleabihf/bin/objdump > > configure:12769: result: /mnt/clfs/cross-tools/arm-linux-musleabihf/bin/objdump > > configure:12969: checking for otool > > configure:13002: result: no > > configure:13080: checking for arm-linux-musleabihf-otool > > configure:13110: result: no > > configure:13199: checking for ranlib > > configure:13217: found /mnt/clfs/cross-tools/arm-linux-musleabihf/bin/ranlib > > configure:13229: result: /mnt/clfs/cross-tools/arm-linux-musleabihf/bin/ranlib > > configure:13429: checking for readelf > > configure:13447: found /mnt/clfs/cross-tools/arm-linux-musleabihf/bin/readelf > > configure:13459: result: /mnt/clfs/cross-tools/arm-linux-musleabihf/bin/readelf > > configure:13659: checking for strip > > configure:13677: found /mnt/clfs/cross-tools/arm-linux-musleabihf/bin/strip > > configure:13689: result: /mnt/clfs/cross-tools/arm-linux-musleabihf/bin/strip > > configure:13889: checking for windres > > configure:13922: result: no > > configure:14000: checking for arm-linux-musleabihf-windres > > configure:14030: result: no > > configure:14119: checking for windmc > > configure:14152: result: no > > configure:14230: checking for arm-linux-musleabihf-windmc > > configure:14260: result: no > > configure:14327: checking where to find the target ar > > configure:14355: result: pre-installed in /mnt/clfs/cross-tools/arm-linux-musleabihf/bin > > configure:14369: checking where to find the target as > > configure:14397: result: pre-installed in /mnt/clfs/cross-tools/arm-linux-musleabihf/bin > > configure:14411: checking where to find the target cc > > configure:14434: result: just compiled > > configure:14453: checking where to find the target c++ > > configure:14493: result: pre-installed > > configure:14498: checking where to find the target c++ for libstdc++ > > configure:14538: result: pre-installed > > configure:14543: checking where to find the target dlltool > > configure:14580: result: pre-installed > > configure:14585: checking where to find the target gcc > > configure:14608: result: just compiled > > configure:14627: checking where to find the target gfortran > > configure:14667: result: pre-installed > > configure:14672: checking where to find the target gccgo > > configure:14712: result: pre-installed > > configure:14717: checking where to find the target gdc > > configure:14757: result: pre-installed > > configure:14762: checking where to find the target ld > > configure:14790: result: pre-installed in /mnt/clfs/cross-tools/arm-linux-musleabihf/bin > > configure:14804: checking where to find the target lipo > > configure:14830: result: pre-installed > > configure:14835: checking where to find the target nm > > configure:14863: result: pre-installed in /mnt/clfs/cross-tools/arm-linux-musleabihf/bin > > configure:14877: checking where to find the target objcopy > > configure:14905: result: pre-installed in /mnt/clfs/cross-tools/arm-linux-musleabihf/bin > > configure:14919: checking where to find the target objdump > > configure:14947: result: pre-installed in /mnt/clfs/cross-tools/arm-linux-musleabihf/bin > > configure:14961: checking where to find the target otool > > configure:14987: result: pre-installed > > configure:14992: checking where to find the target ranlib > > configure:15020: result: pre-installed in /mnt/clfs/cross-tools/arm-linux-musleabihf/bin > > configure:15034: checking where to find the target readelf > > configure:15062: result: pre-installed in /mnt/clfs/cross-tools/arm-linux-musleabihf/bin > > configure:15076: checking where to find the target strip > > configure:15104: result: pre-installed in /mnt/clfs/cross-tools/arm-linux-musleabihf/bin > > configure:15118: checking where to find the target windres > > configure:15155: result: pre-installed > > configure:15160: checking where to find the target windmc > > configure:15197: result: pre-installed > > configure:15230: checking whether to enable maintainer-specific portions of Makefiles > > configure:15239: result: no > > configure:15474: creating ./config.status > > > > ## ---------------------- ## > > ## Running config.status. ## > > ## ---------------------- ## > > > > This file was extended by config.status, which was > > generated by GNU Autoconf 2.69. Invocation command line was > > > > CONFIG_FILES = > > CONFIG_HEADERS = > > CONFIG_LINKS = > > CONFIG_COMMANDS = > > $ ./config.status > > > > on hib > > > > config.status:1016: creating Makefile > > > > ## ---------------- ## > > ## Cache variables. ## > > ## ---------------- ## > > > > ac_cv_build=x86_64-cross-linux-gnu > > ac_cv_c_compiler_gnu=yes > > ac_cv_cxx_compiler_gnu=yes > > ac_cv_env_AR_FOR_TARGET_set= > > ac_cv_env_AR_FOR_TARGET_value= > > ac_cv_env_AR_set= > > ac_cv_env_AR_value= > > ac_cv_env_AS_FOR_TARGET_set= > > ac_cv_env_AS_FOR_TARGET_value= > > ac_cv_env_AS_set= > > ac_cv_env_AS_value= > > ac_cv_env_CCC_set= > > ac_cv_env_CCC_value= > > ac_cv_env_CC_FOR_TARGET_set= > > ac_cv_env_CC_FOR_TARGET_value= > > ac_cv_env_CC_set= > > ac_cv_env_CC_value= > > ac_cv_env_CFLAGS_set= > > ac_cv_env_CFLAGS_value= > > ac_cv_env_CPPFLAGS_set= > > ac_cv_env_CPPFLAGS_value= > > ac_cv_env_CXXFLAGS_set= > > ac_cv_env_CXXFLAGS_value= > > ac_cv_env_CXX_FOR_TARGET_set= > > ac_cv_env_CXX_FOR_TARGET_value= > > ac_cv_env_CXX_set= > > ac_cv_env_CXX_value= > > ac_cv_env_DLLTOOL_FOR_TARGET_set= > > ac_cv_env_DLLTOOL_FOR_TARGET_value= > > ac_cv_env_DLLTOOL_set= > > ac_cv_env_DLLTOOL_value= > > ac_cv_env_GCC_FOR_TARGET_set= > > ac_cv_env_GCC_FOR_TARGET_value= > > ac_cv_env_GDC_FOR_TARGET_set= > > ac_cv_env_GDC_FOR_TARGET_value= > > ac_cv_env_GFORTRAN_FOR_TARGET_set= > > ac_cv_env_GFORTRAN_FOR_TARGET_value= > > ac_cv_env_GOC_FOR_TARGET_set= > > ac_cv_env_GOC_FOR_TARGET_value= > > ac_cv_env_LDFLAGS_set= > > ac_cv_env_LDFLAGS_value= > > ac_cv_env_LD_FOR_TARGET_set= > > ac_cv_env_LD_FOR_TARGET_value= > > ac_cv_env_LD_set= > > ac_cv_env_LD_value= > > ac_cv_env_LIBS_set= > > ac_cv_env_LIBS_value= > > ac_cv_env_LIPO_FOR_TARGET_set= > > ac_cv_env_LIPO_FOR_TARGET_value= > > ac_cv_env_LIPO_set= > > ac_cv_env_LIPO_value= > > ac_cv_env_NM_FOR_TARGET_set= > > ac_cv_env_NM_FOR_TARGET_value= > > ac_cv_env_NM_set= > > ac_cv_env_NM_value= > > ac_cv_env_OBJCOPY_FOR_TARGET_set= > > ac_cv_env_OBJCOPY_FOR_TARGET_value= > > ac_cv_env_OBJCOPY_set= > > ac_cv_env_OBJCOPY_value= > > ac_cv_env_OBJDUMP_FOR_TARGET_set= > > ac_cv_env_OBJDUMP_FOR_TARGET_value= > > ac_cv_env_OBJDUMP_set= > > ac_cv_env_OBJDUMP_value= > > ac_cv_env_OTOOL_FOR_TARGET_set= > > ac_cv_env_OTOOL_FOR_TARGET_value= > > ac_cv_env_OTOOL_set= > > ac_cv_env_OTOOL_value= > > ac_cv_env_RANLIB_FOR_TARGET_set= > > ac_cv_env_RANLIB_FOR_TARGET_value= > > ac_cv_env_RANLIB_set= > > ac_cv_env_RANLIB_value= > > ac_cv_env_READELF_FOR_TARGET_set= > > ac_cv_env_READELF_FOR_TARGET_value= > > ac_cv_env_READELF_set= > > ac_cv_env_READELF_value= > > ac_cv_env_STRIP_FOR_TARGET_set= > > ac_cv_env_STRIP_FOR_TARGET_value= > > ac_cv_env_STRIP_set= > > ac_cv_env_STRIP_value= > > ac_cv_env_WINDMC_FOR_TARGET_set= > > ac_cv_env_WINDMC_FOR_TARGET_value= > > ac_cv_env_WINDMC_set= > > ac_cv_env_WINDMC_value= > > ac_cv_env_WINDRES_FOR_TARGET_set= > > ac_cv_env_WINDRES_FOR_TARGET_value= > > ac_cv_env_WINDRES_set= > > ac_cv_env_WINDRES_value= > > ac_cv_env_build_alias_set=set > > ac_cv_env_build_alias_value=x86_64-cross-linux-gnu > > ac_cv_env_build_configargs_set= > > ac_cv_env_build_configargs_value= > > ac_cv_env_host_alias_set=set > > ac_cv_env_host_alias_value=x86_64-cross-linux-gnu > > ac_cv_env_host_configargs_set= > > ac_cv_env_host_configargs_value= > > ac_cv_env_target_alias_set=set > > ac_cv_env_target_alias_value=arm-linux-musleabihf > > ac_cv_env_target_configargs_set= > > ac_cv_env_target_configargs_value= > > ac_cv_host=x86_64-cross-linux-gnu > > ac_cv_objext=o > > ac_cv_path_AR_FOR_TARGET=/mnt/clfs/cross-tools/arm-linux-musleabihf/bin/ar > > ac_cv_path_AS_FOR_TARGET=/mnt/clfs/cross-tools/arm-linux-musleabihf/bin/as > > ac_cv_path_LD_FOR_TARGET=/mnt/clfs/cross-tools/arm-linux-musleabihf/bin/ld > > ac_cv_path_NM_FOR_TARGET=/mnt/clfs/cross-tools/arm-linux-musleabihf/bin/nm > > ac_cv_path_OBJCOPY_FOR_TARGET=/mnt/clfs/cross-tools/arm-linux-musleabihf/bin/objcopy > > ac_cv_path_OBJDUMP_FOR_TARGET=/mnt/clfs/cross-tools/arm-linux-musleabihf/bin/objdump > > ac_cv_path_RANLIB_FOR_TARGET=/mnt/clfs/cross-tools/arm-linux-musleabihf/bin/ranlib > > ac_cv_path_READELF_FOR_TARGET=/mnt/clfs/cross-tools/arm-linux-musleabihf/bin/readelf > > ac_cv_path_SED=/bin/sed > > ac_cv_path_STRIP_FOR_TARGET=/mnt/clfs/cross-tools/arm-linux-musleabihf/bin/strip > > ac_cv_path_install='/bin/install -c' > > ac_cv_prog_AR=ar > > ac_cv_prog_AS=as > > ac_cv_prog_AWK=gawk > > ac_cv_prog_BISON=bison > > ac_cv_prog_EXPECT=expect > > ac_cv_prog_FLEX=flex > > ac_cv_prog_LD=ld > > ac_cv_prog_LEX=flex > > ac_cv_prog_M4=m4 > > ac_cv_prog_MAKEINFO=makeinfo > > ac_cv_prog_NM=nm > > ac_cv_prog_OBJCOPY=objcopy > > ac_cv_prog_OBJDUMP=objdump > > ac_cv_prog_RANLIB=ranlib > > ac_cv_prog_READELF=readelf > > ac_cv_prog_STRIP=strip > > ac_cv_prog_YACC='bison -y' > > ac_cv_prog_ac_ct_CC=gcc > > ac_cv_prog_ac_ct_CXX=g++ > > ac_cv_prog_cc_c89= > > ac_cv_prog_cc_g=yes > > ac_cv_prog_cxx_g=yes > > ac_cv_target=arm-unknown-linux-musleabihf > > acx_cv_cc_gcc_supports_ada=no > > acx_cv_prog_LN=ln > > gcc_cv_isl=no > > gcc_cv_prog_cmp_skip='cmp --ignore-initial=16 $$f1 $$f2' > > gcc_cv_tool_dirs=/mnt/clfs/cross-tools/libexec/gcc/arm-linux-musleabihf/9.2.0:/mnt/clfs/cross-tools/libexec/gcc/arm-linux-musleabihf:/usr/lib/gcc/arm-linux-musleabihf/9.2.0:/usr/lib/gcc/arm-linux-musleabihf:/mnt/clfs/cross-tools/arm-linux-musleabihf/bin/arm-linux-musleabihf/9.2.0:/mnt/clfs/cross-tools/arm-linux-musleabihf/bin: > > gcc_cv_tool_prefix=/mnt/clfs/cross-tools > > lt_cv_objdir=.libs > > > > ## ----------------- ## > > ## Output variables. ## > > ## ----------------- ## > > > > AR='ar' > > AR_FOR_BUILD='$(AR)' > > AR_FOR_TARGET='/mnt/clfs/cross-tools/arm-linux-musleabihf/bin/ar' > > AS='as' > > AS_FOR_BUILD='$(AS)' > > AS_FOR_TARGET='/mnt/clfs/cross-tools/arm-linux-musleabihf/bin/as' > > AWK='gawk' > > BISON='bison' > > BUILD_CONFIG='' > > CC='gcc' > > CC_FOR_BUILD='$(CC)' > > CC_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/xgcc -B$$r/$(HOST_SUBDIR)/gcc/' > > CFLAGS='-g -O2' > > CFLAGS_FOR_BUILD='-g -O2' > > CFLAGS_FOR_TARGET='-g -O2' > > COMPILER_AS_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/as' > > COMPILER_LD_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/collect-ld' > > COMPILER_NM_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/nm' > > CONFIGURE_GDB_TK='' > > CPPFLAGS='' > > CXX='g++' > > CXXFLAGS='-g -O2' > > CXXFLAGS_FOR_BUILD='-g -O2' > > CXXFLAGS_FOR_TARGET='-g -O2' > > CXX_FOR_BUILD='$(CXX)' > > CXX_FOR_TARGET='arm-linux-musleabihf-c++' > > DEBUG_PREFIX_CFLAGS_FOR_TARGET='' > > DEFS='-DPACKAGE_NAME=\"\" -DPACKAGE_TARNAME=\"\" -DPACKAGE_VERSION=\"\" -DPACKAGE_STRING=\"\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE_URL=\"\" -DLT_OBJDIR=\".libs/\"' > > DLLTOOL='dlltool' > > DLLTOOL_FOR_BUILD='$(DLLTOOL)' > > DLLTOOL_FOR_TARGET='arm-linux-musleabihf-dlltool' > > ECHO_C='' > > ECHO_N='-n' > > ECHO_T='' > > EXEEXT='' > > EXPECT='expect' > > FLAGS_FOR_TARGET=' -B$(build_tooldir)/bin/ -B$(build_tooldir)/lib/ -isystem $(build_tooldir)/include -isystem $(build_tooldir)/sys-include' > > FLEX='flex' > > GCC_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/xgcc -B$$r/$(HOST_SUBDIR)/gcc/' > > GCC_SHLIB_SUBDIR='' > > GDB_TK='' > > GDC_FOR_BUILD='$(GDC)' > > GDC_FOR_TARGET='arm-linux-musleabihf-gdc' > > GFORTRAN_FOR_BUILD='$(GFORTRAN)' > > GFORTRAN_FOR_TARGET='arm-linux-musleabihf-gfortran' > > GNATBIND='no' > > GNATMAKE='no' > > GOC_FOR_BUILD='$(GOC)' > > GOC_FOR_TARGET='arm-linux-musleabihf-gccgo' > > INSTALL_DATA='${INSTALL} -m 644' > > INSTALL_GDB_TK='' > > INSTALL_PROGRAM='${INSTALL}' > > INSTALL_SCRIPT='${INSTALL}' > > LD='ld' > > LDFLAGS='' > > LDFLAGS_FOR_BUILD='' > > LDFLAGS_FOR_TARGET='' > > LD_FOR_BUILD='$(LD)' > > LD_FOR_TARGET='/mnt/clfs/cross-tools/arm-linux-musleabihf/bin/ld' > > LEX='flex' > > LIBOBJS='' > > LIBS='' > > LIPO='lipo' > > LIPO_FOR_TARGET='arm-linux-musleabihf-lipo' > > LN='ln' > > LN_S='ln -s' > > LTLIBOBJS='' > > M4='m4' > > MAINT='#' > > MAINTAINER_MODE_FALSE='' > > MAINTAINER_MODE_TRUE='#' > > MAKEINFO='makeinfo' > > NM='nm' > > NM_FOR_BUILD='$(NM)' > > NM_FOR_TARGET='/mnt/clfs/cross-tools/arm-linux-musleabihf/bin/nm' > > OBJCOPY='objcopy' > > OBJCOPY_FOR_TARGET='/mnt/clfs/cross-tools/arm-linux-musleabihf/bin/objcopy' > > OBJDUMP='objdump' > > OBJDUMP_FOR_TARGET='/mnt/clfs/cross-tools/arm-linux-musleabihf/bin/objdump' > > OBJEXT='o' > > OTOOL='otool' > > OTOOL_FOR_TARGET='arm-linux-musleabihf-otool' > > PACKAGE_BUGREPORT='' > > PACKAGE_NAME='' > > PACKAGE_STRING='' > > PACKAGE_TARNAME='' > > PACKAGE_URL='' > > PACKAGE_VERSION='' > > PATH_SEPARATOR=':' > > RANLIB='ranlib' > > RANLIB_FOR_BUILD='$(RANLIB)' > > RANLIB_FOR_TARGET='/mnt/clfs/cross-tools/arm-linux-musleabihf/bin/ranlib' > > RAW_CXX_FOR_TARGET='arm-linux-musleabihf-c++' > > READELF='readelf' > > READELF_FOR_TARGET='/mnt/clfs/cross-tools/arm-linux-musleabihf/bin/readelf' > > RPATH_ENVVAR='LD_LIBRARY_PATH' > > RUNTEST='runtest' > > SED='/bin/sed' > > SHELL='/bin/bash' > > STRIP='strip' > > STRIP_FOR_TARGET='/mnt/clfs/cross-tools/arm-linux-musleabihf/bin/strip' > > SYSROOT_CFLAGS_FOR_TARGET='' > > TOPLEVEL_CONFIGURE_ARGUMENTS='../gcc-9.2.0/configure --prefix=/mnt/clfs/cross-tools --build=x86_64-cross-linux-gnu --host=x86_64-cross-linux-gnu --target=arm-linux-musleabihf --with-sysroot=/mnt/clfs/cross-tools/arm-linux-musleabihf --disable-nls --disable-shared --without-headers --with-newlib --disable-decimal-float --disable-libgomp --disable-libmudflap --disable-libssp --disable-libatomic --disable-libquadmath --disable-threads --enable-languages=c --enable-multilib --with-mpfr-include=/mnt/clfs/sources/gcc-build/../gcc-9.2.0/mpfr/src --with-mpfr-lib=/mnt/clfs/sources/gcc-build/mpfr/src/.libs --with-multilib-list=rmprofile' > > WINDMC='windmc' > > WINDMC_FOR_BUILD='$(WINDMC)' > > WINDMC_FOR_TARGET='arm-linux-musleabihf-windmc' > > WINDRES='windres' > > WINDRES_FOR_BUILD='$(WINDRES)' > > WINDRES_FOR_TARGET='arm-linux-musleabihf-windres' > > YACC='bison -y' > > ac_ct_CC='gcc' > > ac_ct_CXX='g++' > > bindir='${exec_prefix}/bin' > > build='x86_64-cross-linux-gnu' > > build_alias='x86_64-cross-linux-gnu' > > build_configargs=' --cache-file=./config.cache '\''--prefix=/mnt/clfs/cross-tools'\'' '\''--with-sysroot=/mnt/clfs/cross-tools/arm-linux-musleabihf'\'' '\''--disable-nls'\'' '\''--disable-shared'\'' '\''--without-headers'\'' '\''--with-newlib'\'' '\''--disable-decimal-float'\'' '\''--disable-libgomp'\'' '\''--disable-libmudflap'\'' '\''--disable-libssp'\'' '\''--disable-libatomic'\'' '\''--disable-libquadmath'\'' '\''--disable-threads'\'' '\''--enable-multilib'\'' '\''--with-mpfr-include=/mnt/clfs/sources/gcc-build/../gcc-9.2.0/mpfr/src'\'' '\''--with-mpfr-lib=/mnt/clfs/sources/gcc-build/mpfr/src/.libs'\'' '\''--with-multilib-list=rmprofile'\'' '\''--enable-languages=c,lto'\'' --program-transform-name='\''s&^&arm-linux-musleabihf-&'\'' --disable-option-checking' > > build_configdirs=' libiberty libcpp fixincludes' > > build_cpu='x86_64' > > build_libsubdir='build-x86_64-cross-linux-gnu' > > build_noncanonical='x86_64-cross-linux-gnu' > > build_os='linux-gnu' > > build_subdir='build-x86_64-cross-linux-gnu' > > build_tooldir='${exec_prefix}/arm-linux-musleabihf' > > build_vendor='cross' > > compare_exclusions='gcc/cc*-checksum$(objext) | gcc/ada/*tools/*' > > configdirs=' intl libiberty zlib libbacktrace libcpp libdecnumber gmp mpfr mpc fixincludes gcc libcc1 lto-plugin' > > datadir='${datarootdir}' > > datarootdir='${prefix}/share' > > do_compare='cmp --ignore-initial=16 $$f1 $$f2' > > docdir='${datarootdir}/doc/${PACKAGE}' > > dvidir='${docdir}' > > exec_prefix='${prefix}' > > extra_host_libiberty_configure_flags='--enable-shared' > > extra_host_zlib_configure_flags='' > > extra_isl_gmp_configure_flags='--with-gmp-builddir=$$r/$(HOST_SUBDIR)/gmp' > > extra_liboffloadmic_configure_flags='' > > extra_linker_plugin_configure_flags='' > > extra_linker_plugin_flags='' > > extra_mpc_gmp_configure_flags='--with-gmp-include=$$r/$(HOST_SUBDIR)/gmp --with-gmp-lib=$$r/$(HOST_SUBDIR)/gmp/.libs' > > extra_mpc_mpfr_configure_flags='' > > extra_mpfr_configure_flags='--with-gmp-include=$$r/$(HOST_SUBDIR)/gmp --with-gmp-lib=$$r/$(HOST_SUBDIR)/gmp/.libs' > > get_gcc_base_ver='cat' > > gmpinc='-I$$r/$(HOST_SUBDIR)/gmp -I$$s/gmp -I/mnt/clfs/sources/gcc-build/../gcc-9.2.0/mpfr/src -I$$s/mpc/src ' > > gmplibs='-L$$r/$(HOST_SUBDIR)/gmp/.libs -L/mnt/clfs/sources/gcc-build/mpfr/src/.libs -L$$r/$(HOST_SUBDIR)/mpc/src/.libs -lmpc -lmpfr -lgmp' > > host='x86_64-cross-linux-gnu' > > host_alias='x86_64-cross-linux-gnu' > > host_configargs=' --cache-file=./config.cache '\''--prefix=/mnt/clfs/cross-tools'\'' '\''--with-sysroot=/mnt/clfs/cross-tools/arm-linux-musleabihf'\'' '\''--disable-nls'\'' '\''--disable-shared'\'' '\''--without-headers'\'' '\''--with-newlib'\'' '\''--disable-decimal-float'\'' '\''--disable-libgomp'\'' '\''--disable-libmudflap'\'' '\''--disable-libssp'\'' '\''--disable-libatomic'\'' '\''--disable-libquadmath'\'' '\''--disable-threads'\'' '\''--enable-multilib'\'' '\''--with-mpfr-include=/mnt/clfs/sources/gcc-build/../gcc-9.2.0/mpfr/src'\'' '\''--with-mpfr-lib=/mnt/clfs/sources/gcc-build/mpfr/src/.libs'\'' '\''--with-multilib-list=rmprofile'\'' '\''--enable-languages=c,lto'\'' --program-transform-name='\''s&^&arm-linux-musleabihf-&'\'' --disable-option-checking' > > host_cpu='x86_64' > > host_noncanonical='x86_64-cross-linux-gnu' > > host_os='linux-gnu' > > host_shared='no' > > host_subdir='.' > > host_vendor='cross' > > htmldir='${docdir}' > > includedir='${prefix}/include' > > infodir='${datarootdir}/info' > > islinc='' > > isllibs='' > > libdir='${exec_prefix}/lib' > > libexecdir='${exec_prefix}/libexec' > > localedir='${datarootdir}/locale' > > localstatedir='${prefix}/var' > > mandir='${datarootdir}/man' > > oldincludedir='/usr/include' > > pdfdir='${docdir}' > > poststage1_ldflags='-static-libstdc++ -static-libgcc' > > poststage1_libs='' > > prefix='/mnt/clfs/cross-tools' > > program_transform_name='s&^&arm-linux-musleabihf-&' > > psdir='${docdir}' > > sbindir='${exec_prefix}/sbin' > > sharedstatedir='${prefix}/com' > > stage1_cflags='-g' > > stage1_checking='--enable-checking=yes,types' > > stage1_languages='c,lto' > > stage1_ldflags='-static-libstdc++ -static-libgcc' > > stage1_libs='' > > stage2_werror_flag='' > > sysconfdir='${prefix}/etc' > > target='arm-unknown-linux-musleabihf' > > target_alias='arm-linux-musleabihf' > > target_configargs='--cache-file=./config.cache --with-cross-host=x86_64-cross-linux-gnu '\''--prefix=/mnt/clfs/cross-tools'\'' '\''--with-sysroot=/mnt/clfs/cross-tools/arm-linux-musleabihf'\'' '\''--disable-nls'\'' '\''--disable-shared'\'' '\''--without-headers'\'' '\''--with-newlib'\'' '\''--disable-decimal-float'\'' '\''--disable-libgomp'\'' '\''--disable-libmudflap'\'' '\''--disable-libssp'\'' '\''--disable-libatomic'\'' '\''--disable-libquadmath'\'' '\''--disable-threads'\'' '\''--enable-multilib'\'' '\''--with-multilib-list=rmprofile'\'' '\''--enable-languages=c,lto'\'' --program-transform-name='\''s&^&arm-linux-musleabihf-&'\'' --disable-option-checking' > > target_configdirs=' libgcc' > > target_cpu='arm' > > target_noncanonical='arm-linux-musleabihf' > > target_os='linux-musleabihf' > > target_subdir='arm-linux-musleabihf' > > target_vendor='unknown' > > tooldir='${exec_prefix}/arm-linux-musleabihf' > > > > ## ------------------- ## > > ## File substitutions. ## > > ## ------------------- ## > > > > alphaieee_frag='/dev/null' > > host_makefile_frag='/dev/null' > > ospace_frag='/dev/null' > > serialization_dependencies='serdep.tmp' > > target_makefile_frag='../gcc-9.2.0/config/mt-gnu' > > > > ## ----------- ## > > ## confdefs.h. ## > > ## ----------- ## > > > > /* confdefs.h */ > > #define PACKAGE_NAME "" > > #define PACKAGE_TARNAME "" > > #define PACKAGE_VERSION "" > > #define PACKAGE_STRING "" > > #define PACKAGE_BUGREPORT "" > > #define PACKAGE_URL "" > > #define LT_OBJDIR ".libs/" > > > > configure: exit 0 > > > > What could be the problem? > > --------------------------------------------------------------- > > On Mon, Nov 11, 2019 at 01:42:43PM +0000, Richard Earnshaw (lists) wrote: > > > On 11/11/2019 13:33, sayed israr wrote: > > > > ---------- Forwarded message --------- > > > > From: Israr Sayed <sd.israr@gmail.com> > > > > Date: Mon, Nov 11, 2019 at 5:38 PM > > > > Subject: Re: Is it possible to build Single GCC Executable for armv5, > > > > armv6, armv7-{cortex-xx-{A,R,M}},armv8 etc.? > > > > To: Jonathan Wakely <jwakely.gcc@gmail.com> > > > > > > > > > > > > I am building GCC from sources.Where i can configure it with 2 ways: > > > > (1) --with-arch --with-cpu --with-fpu --with-float options . > > > > (2) --with-multilib-list= . > > > > In --with-multilib-list, we can configure for various combinations of > > > > armv*-*-*. > > > > For example, I want to build gcc for with arch = armv7, armv7-m, armv7e-m, > > > > with float = hard, softfp, soft. > > > > with fpu = fpv, fpv4, fpv4-d16 etc.. > > > > whereas if in configure i mention --with-arch --with-fpu --with-float.That > > > > will build GCC for those options only. > > > > I have a prebuilt arm GCC binary for STM32F controllers, which is built for > > > > whole range of armv7-M, armv7e-m along with FPUs. > > > > there configure options show --with-multilib-list=rmprofile. > > > > rmprofile is the multilib option for configure.Which is exactly what > > > > gcc/config/arm/t-rmprofile file is about. > > > > I hope i can explain my question better. > > > > > > You can configure the compiler with --with-multlib-list=xxx > > > > > > where xxx is any of "aprofile", "rmprofile" and "aprofile,rmprofile" > > > > > > If you do this, DO NOT specify any of --with-fpu, --with-cpu, --with-tune or > > > --with-arch. > > > > > > Be warned, the full set of multilibs is LARGE. It requires a fast machine > > > and/or a lot of time to build them all. > > > > > > You can, of course, edit any of the files - the GPL gives you that right, > > > but if you do so, you're most likely on your own. The multilib > > > configurations are complex and rely heavily on GNU Makefile trickery to > > > express all the required combinations. > > > > > > R. > > > > > > > ------------------------------------------------------ > > > > > > > > On Mon, Nov 11, 2019 at 11:40:39AM +0000, Jonathan Wakely wrote: > > > > > On Sun, 10 Nov 2019 at 11:36, Israr Sayed <sd.israr@gmail.com> wrote: > > > > > > > > > > > > Digging into the sources of GCC I noticed in files gcc/config/arm/t-*, > > > > There are multiple arm target options. > > > > > > > > > > > > Reading [GCC internal Manual], These are called Target Makefile > > > > Fragments, which will be included in main Makefile, like MULTILIB_OPTIONS, > > > > MULTILIB_DIRNAMES, MULTILIB_MATCHES, MULTILIB_REQUIRED, MULTILIB_REUSE, > > > > MULTILIB_EXTRA_OPTS, MULTILIB_OSDIRNAMES, MULTIARCH_DIRNAME. > > > > > > > > > > > > What I am not able to understand that how to bring it in at the time of > > > > configure.Which option to choose? > > > > > > > > > > > > More over is it possible to edit those t-* files as per the requirement > > > > and how? > > > > > > Please Help. > > > > > > > > > > I don't understand your question. Your email's subject talks about a > > > > > single GCC executable for multiple ARM variants, which is supported > > > > > automatically. When you configure GCC for an ARM target you can select > > > > > the specific processor type using the -march and/or -mcpu options. See > > > > > the documentation of command-line options in the GCC manual. > > > > > > > > > > You don't need to do anything special to use the target makefile > > > > > fragments, they're used automatically, as needed. > > > > ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: Fwd: Is it possible to build Single GCC Executable for armv5, armv6, armv7-{cortex-xx-{A,R,M}},armv8 etc.? 2019-11-16 23:07 ` Israr Sayed @ 2019-11-18 15:53 ` Richard Earnshaw (lists) 2019-11-18 16:33 ` Israr Sayed 0 siblings, 1 reply; 9+ messages in thread From: Richard Earnshaw (lists) @ 2019-11-18 15:53 UTC (permalink / raw) To: Israr Sayed; +Cc: gcc-help On 16/11/2019 23:07, Israr Sayed wrote: > On Tue, Nov 12, 2019 at 10:00:08AM +0000, Richard Earnshaw (lists) wrote: >> On 11/11/2019 17:49, Israr Sayed wrote: >>> As per your instructions i tried to build the GCC.I got the following errors: >>> /mnt/clfs/sources/gcc-build/./gcc/xgcc -B/mnt/clfs/sources/gcc-build/./gcc/ -B/mnt/clfs/cross-tools/arm-linux-musleabihf/bin/ -B/mnt/clfs/cross-tools/arm-linux-musleabihf/lib/ -isystem /mnt/clfs/cross-tools/arm-linux-musleabihf/include -isystem /mnt/clfs/cross-tools/arm-linux-musleabihf/sys-include -g -O2 -mthumb -march=armv6s-m -mfloat-abi=soft -O2 -g -O2 -DIN_GCC -DCROSS_DIRECTORY_STRUCTURE -W -Wall -Wno-narrowing -Wwrite-strings -Wcast-qual -Wstrict-prototypes -Wmissing-prototypes -Wold-style-definition -isystem ./include -fPIC -fno-inline -g -DIN_LIBGCC2 -fbuilding-libgcc -fno-stack-protector -Dinhibit_libc -fPIC -fno-inline -I. -I. -I../../../../.././gcc -I../../../../../../gcc-9.2.0/libgcc -I../../../../../../gcc-9.2.0/libgcc/. -I../../../../../../gcc-9.2.0/libgcc/../gcc -I../../../../../../gcc-9.2.0/libgcc/../include -DHAVE_CC_TLS -o _dvmd_lnx_s.o -MT _dvmd_lnx_s.o -MD -MP -MF _dvmd_lnx_s.dep -DSHARED -DL_dvmd_lnx -xassembler-with-cpp -c ../../../../../../gcc-9.2.0/libgcc/config/arm/lib1funcs.S >>> ../../../../../../gcc-9.2.0/libgcc/config/arm/lib1funcs.S: Assembler messages: >>> ../../../../../../gcc-9.2.0/libgcc/config/arm/lib1funcs.S:1482: Error: bad instruction `arm_func_start aeabi_idiv0' >>> ../../../../../../gcc-9.2.0/libgcc/config/arm/lib1funcs.S:1483: Error: bad instruction `arm_func_start aeabi_ldiv0' >>> ../../../../../../gcc-9.2.0/libgcc/config/arm/lib1funcs.S:1484: Error: selected processor does not support `stmfd sp!,{r1,lr}' in Thumb mode >>> ../../../../../../gcc-9.2.0/libgcc/config/arm/lib1funcs.S:1495: Error: lo register required -- `ldmia sp!,{r1,pc}' >>> ../../../../../../gcc-9.2.0/libgcc/config/arm/lib1funcs.S:1485: Error: invalid operands (.text and *UND* sections) for `-' >>> ../../../../../../gcc-9.2.0/libgcc/config/arm/lib1funcs.S:1479: Error: can't resolve `.text' {.text section} - `__aeabi_ldiv0' {*UND* section} >>> /tmp/cc0Si52Z.s: Error: .size expression for __aeabi_ldiv0 does not evaluate to a constant >>> /tmp/cc0Si52Z.s: Error: .size expression for __aeabi_idiv0 does not evaluate to a constant >>> make[3]: *** [Makefile:488: _dvmd_lnx_s.o] Error 1 >>> make[3]: Leaving directory '/mnt/clfs/sources/gcc-build/arm-linux-musleabihf/thumb/v6-m/nofp/libgcc' >>> make[2]: *** [Makefile:1210: multi-do] Error 1 >>> make[2]: Leaving directory '/mnt/clfs/sources/gcc-build/arm-linux-musleabihf/libgcc' >>> make[1]: *** [Makefile:127: all-multi] Error 2 >>> make[1]: Leaving directory '/mnt/clfs/sources/gcc-build/arm-linux-musleabihf/libgcc' >>> make: *** [Makefile:12499: all-target-libgcc] Error 2 >>> ---------------------------------------------------------- >>> Config.log: >>> This file contains any messages produced by compilers while >>> running configure, to aid debugging if configure makes a mistake. >>> >>> It was created by configure, which was >>> generated by GNU Autoconf 2.69. Invocation command line was >>> >>> $ ../gcc-9.2.0/configure --prefix=/mnt/clfs/cross-tools --build=x86_64-cross-linux-gnu --host=x86_64-cross-linux-gnu --target=arm-linux-musleabihf --with-sysroot=/mnt/clfs/cross-tools/arm-linux-musleabihf --disable-nls --disable-shared --without-headers --with-newlib --disable-decimal-float --disable-libgomp --disable-libmudflap --disable-libssp --disable-libatomic --disable-libquadmath --disable-threads --enable-languages=c --enable-multilib --with-mpfr-include=/mnt/clfs/sources/gcc-build/../gcc-9.2.0/mpfr/src --with-mpfr-lib=/mnt/clfs/sources/gcc-build/mpfr/src/.libs --with-multilib-list=rmprofile >>> >> >> Sorry, I should have said that these multilib configs have only been tested >> with bare metal tools (arm-none-eabi). The error you are seeing is because >> the Linux configurations assume that the Arm instruction set exists and on >> M-profile devices this is not true. >> >> Standard linux configurations also assume the presence of an MMU and no >> M-profile devices support this. >> >> R. >> > > So, both the 2 conditions i.e. ARM Instructions Set and presence of MMU, M and R Profile devices Lack. > Onyly ARMv7-A Profile Devices have both the capabilities. > So, My Question is ,Is it then possible to build the GCC with Multilib for A Profile devices, > Using --with-multilib-list=aprofile ? > That should certainly work for bare-metal configurations (eg arm-none-eabi); that's the intended use case. It may work for arm-linux-gnueabi configurations as well, but I haven't tried that. R. > >>> ## --------- ## >>> ## Platform. ## >>> ## --------- ## >>> >>> hostname = hib >>> uname -m = x86_64 >>> uname -r = 5.3.0-19-generic >>> uname -s = Linux >>> uname -v = #20-Ubuntu SMP Fri Oct 18 09:04:39 UTC 2019 >>> >>> /usr/bin/uname -p = x86_64 >>> /bin/uname -X = unknown >>> >>> /bin/arch = x86_64 >>> /usr/bin/arch -k = unknown >>> /usr/convex/getsysinfo = unknown >>> /usr/bin/hostinfo = unknown >>> /bin/machine = unknown >>> /usr/bin/oslevel = unknown >>> /bin/universe = unknown >>> >>> PATH: /mnt/clfs/cross-tools/bin >>> PATH: /bin >>> PATH: /usr/bin >>> >>> >>> ## ----------- ## >>> ## Core tests. ## >>> ## ----------- ## >>> >>> configure:2348: checking build system type >>> configure:2362: result: x86_64-cross-linux-gnu >>> configure:2409: checking host system type >>> configure:2422: result: x86_64-cross-linux-gnu >>> configure:2442: checking target system type >>> configure:2455: result: arm-unknown-linux-musleabihf >>> configure:2509: checking for a BSD-compatible install >>> configure:2577: result: /bin/install -c >>> configure:2588: checking whether ln works >>> configure:2610: result: yes >>> configure:2614: checking whether ln -s works >>> configure:2618: result: yes >>> configure:2625: checking for a sed that does not truncate output >>> configure:2689: result: /bin/sed >>> configure:2698: checking for gawk >>> configure:2714: found /bin/gawk >>> configure:2725: result: gawk >>> configure:3257: checking for libitm support >>> configure:3267: result: yes >>> configure:3276: checking for libsanitizer support >>> configure:3286: result: yes >>> configure:3295: checking for libvtv support >>> configure:3305: result: yes >>> configure:3315: checking for libhsail-rt support >>> configure:3321: result: no >>> configure:3406: checking for libphobos support >>> configure:3416: result: yes >>> configure:4036: checking for x86_64-cross-linux-gnu-gcc >>> configure:4066: result: no >>> configure:4076: checking for gcc >>> configure:4092: found /bin/gcc >>> configure:4103: result: gcc >>> configure:4332: checking for C compiler version >>> configure:4341: gcc --version >&5 >>> gcc (Ubuntu 9.2.1-9ubuntu2) 9.2.1 20191008 >>> Copyright (C) 2019 Free Software Foundation, Inc. >>> This is free software; see the source for copying conditions. There is NO >>> warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. >>> >>> configure:4352: $? = 0 >>> configure:4341: gcc -v >&5 >>> Using built-in specs. >>> COLLECT_GCC=gcc >>> COLLECT_LTO_WRAPPER=/usr/lib/gcc/x86_64-linux-gnu/9/lto-wrapper >>> OFFLOAD_TARGET_NAMES=nvptx-none:hsa >>> OFFLOAD_TARGET_DEFAULT=1 >>> Target: x86_64-linux-gnu >>> Configured with: ../src/configure -v --with-pkgversion='Ubuntu 9.2.1-9ubuntu2' --with-bugurl=file:///usr/share/doc/gcc-9/README.Bugs --enable-languages=c,ada,c++,go,brig,d,fortran,objc,obj-c++,gm2 --prefix=/usr --with-gcc-major-version-only --program-suffix=-9 --program-prefix=x86_64-linux-gnu- --enable-shared --enable-linker-build-id --libexecdir=/usr/lib --without-included-gettext --enable-threads=posix --libdir=/usr/lib --enable-nls --enable-bootstrap --enable-clocale=gnu --enable-libstdcxx-debug --enable-libstdcxx-time=yes --with-default-libstdcxx-abi=new --enable-gnu-unique-object --disable-vtable-verify --enable-plugin --enable-default-pie --with-system-zlib --with-target-system-zlib=auto --enable-multiarch --disable-werror --with-arch-32=i686 --with-abi=m64 --with-multilib-list=m32,m64,mx32 --enable-multilib --with-tune=generic --enable-offload-targets=nvptx-none,hsa --without-cuda-driver --enable-checking=release --build=x86_64-linux-gnu --host=x86_64-linux-gnu --target=x86_64-linux-gnu >>> Thread model: posix >>> gcc version 9.2.1 20191008 (Ubuntu 9.2.1-9ubuntu2) >>> configure:4352: $? = 0 >>> configure:4341: gcc -V >&5 >>> gcc: error: unrecognized command line option '-V' >>> gcc: fatal error: no input files >>> compilation terminated. >>> configure:4352: $? = 1 >>> configure:4341: gcc -qversion >&5 >>> gcc: error: unrecognized command line option '-qversion'; did you mean '--version'? >>> gcc: fatal error: no input files >>> compilation terminated. >>> configure:4352: $? = 1 >>> configure:4372: checking whether the C compiler works >>> configure:4394: gcc conftest.c >&5 >>> configure:4398: $? = 0 >>> configure:4446: result: yes >>> configure:4449: checking for C compiler default output file name >>> configure:4451: result: a.out >>> configure:4457: checking for suffix of executables >>> configure:4464: gcc -o conftest conftest.c >&5 >>> configure:4468: $? = 0 >>> configure:4490: result: >>> configure:4512: checking whether we are cross compiling >>> configure:4520: gcc -o conftest conftest.c >&5 >>> configure:4524: $? = 0 >>> configure:4531: ./conftest >>> configure:4535: $? = 0 >>> configure:4523: result: no >>> configure:4528: checking for suffix of object files >>> configure:4550: gcc -c conftest.c >&5 >>> configure:4554: $? = 0 >>> configure:4575: result: o >>> configure:4579: checking whether we are using the GNU C compiler >>> configure:4598: gcc -c conftest.c >&5 >>> configure:4598: $? = 0 >>> configure:4607: result: yes >>> configure:4616: checking whether gcc accepts -g >>> configure:4636: gcc -c -g conftest.c >&5 >>> configure:4636: $? = 0 >>> configure:4677: result: yes >>> configure:4694: checking for gcc option to accept ISO C89 >>> configure:4757: gcc -c -g -O2 conftest.c >&5 >>> configure:4757: $? = 0 >>> configure:4770: result: none needed >>> configure:4804: checking for x86_64-cross-linux-gnu-g++ >>> configure:4834: result: no >>> configure:4804: checking for x86_64-cross-linux-gnu-c++ >>> configure:4834: result: no >>> configure:4804: checking for x86_64-cross-linux-gnu-gpp >>> configure:4834: result: no >>> configure:4804: checking for x86_64-cross-linux-gnu-aCC >>> configure:4834: result: no >>> configure:4804: checking for x86_64-cross-linux-gnu-CC >>> configure:4834: result: no >>> configure:4804: checking for x86_64-cross-linux-gnu-cxx >>> configure:4834: result: no >>> configure:4804: checking for x86_64-cross-linux-gnu-cc++ >>> configure:4834: result: no >>> configure:4804: checking for x86_64-cross-linux-gnu-cl.exe >>> configure:4834: result: no >>> configure:4804: checking for x86_64-cross-linux-gnu-FCC >>> configure:4834: result: no >>> configure:4804: checking for x86_64-cross-linux-gnu-KCC >>> configure:4834: result: no >>> configure:4804: checking for x86_64-cross-linux-gnu-RCC >>> configure:4834: result: no >>> configure:4804: checking for x86_64-cross-linux-gnu-xlC_r >>> configure:4834: result: no >>> configure:4804: checking for x86_64-cross-linux-gnu-xlC >>> configure:4834: result: no >>> configure:4848: checking for g++ >>> configure:4864: found /bin/g++ >>> configure:4875: result: g++ >>> configure:4902: checking for C++ compiler version >>> configure:4911: g++ --version >&5 >>> g++ (Ubuntu 9.2.1-9ubuntu2) 9.2.1 20191008 >>> Copyright (C) 2019 Free Software Foundation, Inc. >>> This is free software; see the source for copying conditions. There is NO >>> warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. >>> >>> configure:4922: $? = 0 >>> configure:4911: g++ -v >&5 >>> Using built-in specs. >>> COLLECT_GCC=g++ >>> COLLECT_LTO_WRAPPER=/usr/lib/gcc/x86_64-linux-gnu/9/lto-wrapper >>> OFFLOAD_TARGET_NAMES=nvptx-none:hsa >>> OFFLOAD_TARGET_DEFAULT=1 >>> Target: x86_64-linux-gnu >>> Configured with: ../src/configure -v --with-pkgversion='Ubuntu 9.2.1-9ubuntu2' --with-bugurl=file:///usr/share/doc/gcc-9/README.Bugs --enable-languages=c,ada,c++,go,brig,d,fortran,objc,obj-c++,gm2 --prefix=/usr --with-gcc-major-version-only --program-suffix=-9 --program-prefix=x86_64-linux-gnu- --enable-shared --enable-linker-build-id --libexecdir=/usr/lib --without-included-gettext --enable-threads=posix --libdir=/usr/lib --enable-nls --enable-bootstrap --enable-clocale=gnu --enable-libstdcxx-debug --enable-libstdcxx-time=yes --with-default-libstdcxx-abi=new --enable-gnu-unique-object --disable-vtable-verify --enable-plugin --enable-default-pie --with-system-zlib --with-target-system-zlib=auto --enable-multiarch --disable-werror --with-arch-32=i686 --with-abi=m64 --with-multilib-list=m32,m64,mx32 --enable-multilib --with-tune=generic --enable-offload-targets=nvptx-none,hsa --without-cuda-driver --enable-checking=release --build=x86_64-linux-gnu --host=x86_64-linux-gnu --target=x86_64-linux-gnu >>> Thread model: posix >>> gcc version 9.2.1 20191008 (Ubuntu 9.2.1-9ubuntu2) >>> configure:4922: $? = 0 >>> configure:4911: g++ -V >&5 >>> g++: error: unrecognized command line option '-V' >>> g++: fatal error: no input files >>> compilation terminated. >>> configure:4922: $? = 1 >>> configure:4911: g++ -qversion >&5 >>> g++: error: unrecognized command line option '-qversion'; did you mean '--version'? >>> g++: fatal error: no input files >>> compilation terminated. >>> configure:4922: $? = 1 >>> configure:4926: checking whether we are using the GNU C++ compiler >>> configure:4945: g++ -c conftest.cpp >&5 >>> configure:4945: $? = 0 >>> configure:4954: result: yes >>> configure:4963: checking whether g++ accepts -g >>> configure:4983: g++ -c -g conftest.cpp >&5 >>> configure:4983: $? = 0 >>> configure:5024: result: yes >>> configure:5073: checking whether g++ accepts -static-libstdc++ -static-libgcc >>> configure:5090: g++ -o conftest -g -O2 -static-libstdc++ -static-libgcc conftest.cpp >&5 >>> configure:5090: $? = 0 >>> configure:5091: result: yes >>> configure:5115: checking for x86_64-cross-linux-gnu-gnatbind >>> configure:5145: result: no >>> configure:5155: checking for gnatbind >>> configure:5185: result: no >>> configure:5207: checking for x86_64-cross-linux-gnu-gnatmake >>> configure:5237: result: no >>> configure:5247: checking for gnatmake >>> configure:5277: result: no >>> configure:5296: checking whether compiler driver understands Ada >>> configure:5319: result: no >>> configure:5328: checking how to compare bootstrapped objects >>> configure:5353: result: cmp --ignore-initial=16 $$f1 $$f2 >>> configure:5413: checking for objdir >>> configure:5428: result: .libs >>> configure:5976: checking for isl 0.15 or later >>> configure:5989: gcc -o conftest -g -O2 -I$$r/$(HOST_SUBDIR)/gmp -I$$s/gmp -I/mnt/clfs/sources/gcc-build/../gcc-9.2.0/mpfr/src -I$$s/mpc/src -lisl -L$$r/$(HOST_SUBDIR)/gmp/.libs -L/mnt/clfs/sources/gcc-build/mpfr/src/.libs -L$$r/$(HOST_SUBDIR)/mpc/src/.libs -lmpc -lmpfr -lgmp conftest.c -lisl -lgmp >&5 >>> conftest.c:10:10: fatal error: isl/schedule.h: No such file or directory >>> 10 | #include <isl/schedule.h> >>> | ^~~~~~~~~~~~~~~~ >>> compilation terminated. >>> configure:5989: $? = 1 >>> configure: failed program was: >>> | /* confdefs.h */ >>> | #define PACKAGE_NAME "" >>> | #define PACKAGE_TARNAME "" >>> | #define PACKAGE_VERSION "" >>> | #define PACKAGE_STRING "" >>> | #define PACKAGE_BUGREPORT "" >>> | #define PACKAGE_URL "" >>> | #define LT_OBJDIR ".libs/" >>> | /* end confdefs.h. */ >>> | #include <isl/schedule.h> >>> | int >>> | main () >>> | { >>> | isl_options_set_schedule_serialize_sccs (NULL, 0); >>> | ; >>> | return 0; >>> | } >>> configure:5996: result: no >>> configure:6000: result: required isl version is 0.15 or later >>> configure:7093: checking for default BUILD_CONFIG >>> configure:7125: result: >>> configure:7130: checking for --enable-vtable-verify >>> configure:7143: result: no >>> configure:7744: checking for bison >>> configure:7760: found /bin/bison >>> configure:7771: result: bison -y >>> configure:7791: checking for bison >>> configure:7807: found /bin/bison >>> configure:7818: result: bison >>> configure:7838: checking for gm4 >>> configure:7868: result: no >>> configure:7838: checking for gnum4 >>> configure:7868: result: no >>> configure:7838: checking for m4 >>> configure:7854: found /bin/m4 >>> configure:7865: result: m4 >>> configure:7885: checking for flex >>> configure:7901: found /bin/flex >>> configure:7912: result: flex >>> configure:7933: checking for flex >>> configure:7949: found /bin/flex >>> configure:7960: result: flex >>> configure:7980: checking for makeinfo >>> configure:7996: found /bin/makeinfo >>> configure:8007: result: makeinfo >>> configure:8041: checking for expect >>> configure:8057: found /bin/expect >>> configure:8068: result: expect >>> configure:8090: checking for runtest >>> configure:8120: result: no >>> configure:8196: checking for x86_64-cross-linux-gnu-ar >>> configure:8226: result: no >>> configure:8235: checking for ar >>> configure:8251: found /bin/ar >>> configure:8262: result: ar >>> configure:8337: checking for x86_64-cross-linux-gnu-as >>> configure:8367: result: no >>> configure:8376: checking for as >>> configure:8392: found /bin/as >>> configure:8403: result: as >>> configure:8478: checking for x86_64-cross-linux-gnu-dlltool >>> configure:8508: result: no >>> configure:8517: checking for dlltool >>> configure:8547: result: no >>> configure:8619: checking for x86_64-cross-linux-gnu-ld >>> configure:8649: result: no >>> configure:8658: checking for ld >>> configure:8674: found /bin/ld >>> configure:8685: result: ld >>> configure:8760: checking for x86_64-cross-linux-gnu-lipo >>> configure:8790: result: no >>> configure:8799: checking for lipo >>> configure:8829: result: no >>> configure:8901: checking for x86_64-cross-linux-gnu-nm >>> configure:8931: result: no >>> configure:8940: checking for nm >>> configure:8956: found /bin/nm >>> configure:8967: result: nm >>> configure:9042: checking for x86_64-cross-linux-gnu-ranlib >>> configure:9072: result: no >>> configure:9081: checking for ranlib >>> configure:9097: found /bin/ranlib >>> configure:9108: result: ranlib >>> configure:9178: checking for x86_64-cross-linux-gnu-strip >>> configure:9208: result: no >>> configure:9217: checking for strip >>> configure:9233: found /bin/strip >>> configure:9244: result: strip >>> configure:9314: checking for x86_64-cross-linux-gnu-windres >>> configure:9344: result: no >>> configure:9353: checking for windres >>> configure:9383: result: no >>> configure:9455: checking for x86_64-cross-linux-gnu-windmc >>> configure:9485: result: no >>> configure:9494: checking for windmc >>> configure:9524: result: no >>> configure:9596: checking for x86_64-cross-linux-gnu-objcopy >>> configure:9626: result: no >>> configure:9635: checking for objcopy >>> configure:9651: found /bin/objcopy >>> configure:9662: result: objcopy >>> configure:9737: checking for x86_64-cross-linux-gnu-objdump >>> configure:9767: result: no >>> configure:9776: checking for objdump >>> configure:9792: found /bin/objdump >>> configure:9803: result: objdump >>> configure:9878: checking for x86_64-cross-linux-gnu-otool >>> configure:9908: result: no >>> configure:9917: checking for otool >>> configure:9947: result: no >>> configure:10019: checking for x86_64-cross-linux-gnu-readelf >>> configure:10049: result: no >>> configure:10058: checking for readelf >>> configure:10074: found /bin/readelf >>> configure:10085: result: readelf >>> configure:10199: checking for arm-linux-musleabihf-cc >>> configure:10229: result: no >>> configure:10199: checking for arm-linux-musleabihf-gcc >>> configure:10229: result: no >>> configure:10360: checking for arm-linux-musleabihf-c++ >>> configure:10390: result: no >>> configure:10360: checking for arm-linux-musleabihf-g++ >>> configure:10390: result: no >>> configure:10360: checking for arm-linux-musleabihf-cxx >>> configure:10390: result: no >>> configure:10360: checking for arm-linux-musleabihf-gxx >>> configure:10390: result: no >>> configure:10521: checking for arm-linux-musleabihf-gcc >>> configure:10551: result: no >>> configure:10677: checking for arm-linux-musleabihf-gfortran >>> configure:10707: result: no >>> configure:10838: checking for arm-linux-musleabihf-gccgo >>> configure:10868: result: no >>> configure:10999: checking for arm-linux-musleabihf-gdc >>> configure:11029: result: no >>> configure:11129: checking for ar >>> configure:11147: found /mnt/clfs/cross-tools/arm-linux-musleabihf/bin/ar >>> configure:11159: result: /mnt/clfs/cross-tools/arm-linux-musleabihf/bin/ar >>> configure:11359: checking for as >>> configure:11377: found /mnt/clfs/cross-tools/arm-linux-musleabihf/bin/as >>> configure:11389: result: /mnt/clfs/cross-tools/arm-linux-musleabihf/bin/as >>> configure:11589: checking for dlltool >>> configure:11622: result: no >>> configure:11700: checking for arm-linux-musleabihf-dlltool >>> configure:11730: result: no >>> configure:11819: checking for ld >>> configure:11837: found /mnt/clfs/cross-tools/arm-linux-musleabihf/bin/ld >>> configure:11849: result: /mnt/clfs/cross-tools/arm-linux-musleabihf/bin/ld >>> configure:12049: checking for lipo >>> configure:12082: result: no >>> configure:12160: checking for arm-linux-musleabihf-lipo >>> configure:12190: result: no >>> configure:12279: checking for nm >>> configure:12297: found /mnt/clfs/cross-tools/arm-linux-musleabihf/bin/nm >>> configure:12309: result: /mnt/clfs/cross-tools/arm-linux-musleabihf/bin/nm >>> configure:12509: checking for objcopy >>> configure:12527: found /mnt/clfs/cross-tools/arm-linux-musleabihf/bin/objcopy >>> configure:12539: result: /mnt/clfs/cross-tools/arm-linux-musleabihf/bin/objcopy >>> configure:12739: checking for objdump >>> configure:12757: found /mnt/clfs/cross-tools/arm-linux-musleabihf/bin/objdump >>> configure:12769: result: /mnt/clfs/cross-tools/arm-linux-musleabihf/bin/objdump >>> configure:12969: checking for otool >>> configure:13002: result: no >>> configure:13080: checking for arm-linux-musleabihf-otool >>> configure:13110: result: no >>> configure:13199: checking for ranlib >>> configure:13217: found /mnt/clfs/cross-tools/arm-linux-musleabihf/bin/ranlib >>> configure:13229: result: /mnt/clfs/cross-tools/arm-linux-musleabihf/bin/ranlib >>> configure:13429: checking for readelf >>> configure:13447: found /mnt/clfs/cross-tools/arm-linux-musleabihf/bin/readelf >>> configure:13459: result: /mnt/clfs/cross-tools/arm-linux-musleabihf/bin/readelf >>> configure:13659: checking for strip >>> configure:13677: found /mnt/clfs/cross-tools/arm-linux-musleabihf/bin/strip >>> configure:13689: result: /mnt/clfs/cross-tools/arm-linux-musleabihf/bin/strip >>> configure:13889: checking for windres >>> configure:13922: result: no >>> configure:14000: checking for arm-linux-musleabihf-windres >>> configure:14030: result: no >>> configure:14119: checking for windmc >>> configure:14152: result: no >>> configure:14230: checking for arm-linux-musleabihf-windmc >>> configure:14260: result: no >>> configure:14327: checking where to find the target ar >>> configure:14355: result: pre-installed in /mnt/clfs/cross-tools/arm-linux-musleabihf/bin >>> configure:14369: checking where to find the target as >>> configure:14397: result: pre-installed in /mnt/clfs/cross-tools/arm-linux-musleabihf/bin >>> configure:14411: checking where to find the target cc >>> configure:14434: result: just compiled >>> configure:14453: checking where to find the target c++ >>> configure:14493: result: pre-installed >>> configure:14498: checking where to find the target c++ for libstdc++ >>> configure:14538: result: pre-installed >>> configure:14543: checking where to find the target dlltool >>> configure:14580: result: pre-installed >>> configure:14585: checking where to find the target gcc >>> configure:14608: result: just compiled >>> configure:14627: checking where to find the target gfortran >>> configure:14667: result: pre-installed >>> configure:14672: checking where to find the target gccgo >>> configure:14712: result: pre-installed >>> configure:14717: checking where to find the target gdc >>> configure:14757: result: pre-installed >>> configure:14762: checking where to find the target ld >>> configure:14790: result: pre-installed in /mnt/clfs/cross-tools/arm-linux-musleabihf/bin >>> configure:14804: checking where to find the target lipo >>> configure:14830: result: pre-installed >>> configure:14835: checking where to find the target nm >>> configure:14863: result: pre-installed in /mnt/clfs/cross-tools/arm-linux-musleabihf/bin >>> configure:14877: checking where to find the target objcopy >>> configure:14905: result: pre-installed in /mnt/clfs/cross-tools/arm-linux-musleabihf/bin >>> configure:14919: checking where to find the target objdump >>> configure:14947: result: pre-installed in /mnt/clfs/cross-tools/arm-linux-musleabihf/bin >>> configure:14961: checking where to find the target otool >>> configure:14987: result: pre-installed >>> configure:14992: checking where to find the target ranlib >>> configure:15020: result: pre-installed in /mnt/clfs/cross-tools/arm-linux-musleabihf/bin >>> configure:15034: checking where to find the target readelf >>> configure:15062: result: pre-installed in /mnt/clfs/cross-tools/arm-linux-musleabihf/bin >>> configure:15076: checking where to find the target strip >>> configure:15104: result: pre-installed in /mnt/clfs/cross-tools/arm-linux-musleabihf/bin >>> configure:15118: checking where to find the target windres >>> configure:15155: result: pre-installed >>> configure:15160: checking where to find the target windmc >>> configure:15197: result: pre-installed >>> configure:15230: checking whether to enable maintainer-specific portions of Makefiles >>> configure:15239: result: no >>> configure:15474: creating ./config.status >>> >>> ## ---------------------- ## >>> ## Running config.status. ## >>> ## ---------------------- ## >>> >>> This file was extended by config.status, which was >>> generated by GNU Autoconf 2.69. Invocation command line was >>> >>> CONFIG_FILES = >>> CONFIG_HEADERS = >>> CONFIG_LINKS = >>> CONFIG_COMMANDS = >>> $ ./config.status >>> >>> on hib >>> >>> config.status:1016: creating Makefile >>> >>> ## ---------------- ## >>> ## Cache variables. ## >>> ## ---------------- ## >>> >>> ac_cv_build=x86_64-cross-linux-gnu >>> ac_cv_c_compiler_gnu=yes >>> ac_cv_cxx_compiler_gnu=yes >>> ac_cv_env_AR_FOR_TARGET_set= >>> ac_cv_env_AR_FOR_TARGET_value= >>> ac_cv_env_AR_set= >>> ac_cv_env_AR_value= >>> ac_cv_env_AS_FOR_TARGET_set= >>> ac_cv_env_AS_FOR_TARGET_value= >>> ac_cv_env_AS_set= >>> ac_cv_env_AS_value= >>> ac_cv_env_CCC_set= >>> ac_cv_env_CCC_value= >>> ac_cv_env_CC_FOR_TARGET_set= >>> ac_cv_env_CC_FOR_TARGET_value= >>> ac_cv_env_CC_set= >>> ac_cv_env_CC_value= >>> ac_cv_env_CFLAGS_set= >>> ac_cv_env_CFLAGS_value= >>> ac_cv_env_CPPFLAGS_set= >>> ac_cv_env_CPPFLAGS_value= >>> ac_cv_env_CXXFLAGS_set= >>> ac_cv_env_CXXFLAGS_value= >>> ac_cv_env_CXX_FOR_TARGET_set= >>> ac_cv_env_CXX_FOR_TARGET_value= >>> ac_cv_env_CXX_set= >>> ac_cv_env_CXX_value= >>> ac_cv_env_DLLTOOL_FOR_TARGET_set= >>> ac_cv_env_DLLTOOL_FOR_TARGET_value= >>> ac_cv_env_DLLTOOL_set= >>> ac_cv_env_DLLTOOL_value= >>> ac_cv_env_GCC_FOR_TARGET_set= >>> ac_cv_env_GCC_FOR_TARGET_value= >>> ac_cv_env_GDC_FOR_TARGET_set= >>> ac_cv_env_GDC_FOR_TARGET_value= >>> ac_cv_env_GFORTRAN_FOR_TARGET_set= >>> ac_cv_env_GFORTRAN_FOR_TARGET_value= >>> ac_cv_env_GOC_FOR_TARGET_set= >>> ac_cv_env_GOC_FOR_TARGET_value= >>> ac_cv_env_LDFLAGS_set= >>> ac_cv_env_LDFLAGS_value= >>> ac_cv_env_LD_FOR_TARGET_set= >>> ac_cv_env_LD_FOR_TARGET_value= >>> ac_cv_env_LD_set= >>> ac_cv_env_LD_value= >>> ac_cv_env_LIBS_set= >>> ac_cv_env_LIBS_value= >>> ac_cv_env_LIPO_FOR_TARGET_set= >>> ac_cv_env_LIPO_FOR_TARGET_value= >>> ac_cv_env_LIPO_set= >>> ac_cv_env_LIPO_value= >>> ac_cv_env_NM_FOR_TARGET_set= >>> ac_cv_env_NM_FOR_TARGET_value= >>> ac_cv_env_NM_set= >>> ac_cv_env_NM_value= >>> ac_cv_env_OBJCOPY_FOR_TARGET_set= >>> ac_cv_env_OBJCOPY_FOR_TARGET_value= >>> ac_cv_env_OBJCOPY_set= >>> ac_cv_env_OBJCOPY_value= >>> ac_cv_env_OBJDUMP_FOR_TARGET_set= >>> ac_cv_env_OBJDUMP_FOR_TARGET_value= >>> ac_cv_env_OBJDUMP_set= >>> ac_cv_env_OBJDUMP_value= >>> ac_cv_env_OTOOL_FOR_TARGET_set= >>> ac_cv_env_OTOOL_FOR_TARGET_value= >>> ac_cv_env_OTOOL_set= >>> ac_cv_env_OTOOL_value= >>> ac_cv_env_RANLIB_FOR_TARGET_set= >>> ac_cv_env_RANLIB_FOR_TARGET_value= >>> ac_cv_env_RANLIB_set= >>> ac_cv_env_RANLIB_value= >>> ac_cv_env_READELF_FOR_TARGET_set= >>> ac_cv_env_READELF_FOR_TARGET_value= >>> ac_cv_env_READELF_set= >>> ac_cv_env_READELF_value= >>> ac_cv_env_STRIP_FOR_TARGET_set= >>> ac_cv_env_STRIP_FOR_TARGET_value= >>> ac_cv_env_STRIP_set= >>> ac_cv_env_STRIP_value= >>> ac_cv_env_WINDMC_FOR_TARGET_set= >>> ac_cv_env_WINDMC_FOR_TARGET_value= >>> ac_cv_env_WINDMC_set= >>> ac_cv_env_WINDMC_value= >>> ac_cv_env_WINDRES_FOR_TARGET_set= >>> ac_cv_env_WINDRES_FOR_TARGET_value= >>> ac_cv_env_WINDRES_set= >>> ac_cv_env_WINDRES_value= >>> ac_cv_env_build_alias_set=set >>> ac_cv_env_build_alias_value=x86_64-cross-linux-gnu >>> ac_cv_env_build_configargs_set= >>> ac_cv_env_build_configargs_value= >>> ac_cv_env_host_alias_set=set >>> ac_cv_env_host_alias_value=x86_64-cross-linux-gnu >>> ac_cv_env_host_configargs_set= >>> ac_cv_env_host_configargs_value= >>> ac_cv_env_target_alias_set=set >>> ac_cv_env_target_alias_value=arm-linux-musleabihf >>> ac_cv_env_target_configargs_set= >>> ac_cv_env_target_configargs_value= >>> ac_cv_host=x86_64-cross-linux-gnu >>> ac_cv_objext=o >>> ac_cv_path_AR_FOR_TARGET=/mnt/clfs/cross-tools/arm-linux-musleabihf/bin/ar >>> ac_cv_path_AS_FOR_TARGET=/mnt/clfs/cross-tools/arm-linux-musleabihf/bin/as >>> ac_cv_path_LD_FOR_TARGET=/mnt/clfs/cross-tools/arm-linux-musleabihf/bin/ld >>> ac_cv_path_NM_FOR_TARGET=/mnt/clfs/cross-tools/arm-linux-musleabihf/bin/nm >>> ac_cv_path_OBJCOPY_FOR_TARGET=/mnt/clfs/cross-tools/arm-linux-musleabihf/bin/objcopy >>> ac_cv_path_OBJDUMP_FOR_TARGET=/mnt/clfs/cross-tools/arm-linux-musleabihf/bin/objdump >>> ac_cv_path_RANLIB_FOR_TARGET=/mnt/clfs/cross-tools/arm-linux-musleabihf/bin/ranlib >>> ac_cv_path_READELF_FOR_TARGET=/mnt/clfs/cross-tools/arm-linux-musleabihf/bin/readelf >>> ac_cv_path_SED=/bin/sed >>> ac_cv_path_STRIP_FOR_TARGET=/mnt/clfs/cross-tools/arm-linux-musleabihf/bin/strip >>> ac_cv_path_install='/bin/install -c' >>> ac_cv_prog_AR=ar >>> ac_cv_prog_AS=as >>> ac_cv_prog_AWK=gawk >>> ac_cv_prog_BISON=bison >>> ac_cv_prog_EXPECT=expect >>> ac_cv_prog_FLEX=flex >>> ac_cv_prog_LD=ld >>> ac_cv_prog_LEX=flex >>> ac_cv_prog_M4=m4 >>> ac_cv_prog_MAKEINFO=makeinfo >>> ac_cv_prog_NM=nm >>> ac_cv_prog_OBJCOPY=objcopy >>> ac_cv_prog_OBJDUMP=objdump >>> ac_cv_prog_RANLIB=ranlib >>> ac_cv_prog_READELF=readelf >>> ac_cv_prog_STRIP=strip >>> ac_cv_prog_YACC='bison -y' >>> ac_cv_prog_ac_ct_CC=gcc >>> ac_cv_prog_ac_ct_CXX=g++ >>> ac_cv_prog_cc_c89= >>> ac_cv_prog_cc_g=yes >>> ac_cv_prog_cxx_g=yes >>> ac_cv_target=arm-unknown-linux-musleabihf >>> acx_cv_cc_gcc_supports_ada=no >>> acx_cv_prog_LN=ln >>> gcc_cv_isl=no >>> gcc_cv_prog_cmp_skip='cmp --ignore-initial=16 $$f1 $$f2' >>> gcc_cv_tool_dirs=/mnt/clfs/cross-tools/libexec/gcc/arm-linux-musleabihf/9.2.0:/mnt/clfs/cross-tools/libexec/gcc/arm-linux-musleabihf:/usr/lib/gcc/arm-linux-musleabihf/9.2.0:/usr/lib/gcc/arm-linux-musleabihf:/mnt/clfs/cross-tools/arm-linux-musleabihf/bin/arm-linux-musleabihf/9.2.0:/mnt/clfs/cross-tools/arm-linux-musleabihf/bin: >>> gcc_cv_tool_prefix=/mnt/clfs/cross-tools >>> lt_cv_objdir=.libs >>> >>> ## ----------------- ## >>> ## Output variables. ## >>> ## ----------------- ## >>> >>> AR='ar' >>> AR_FOR_BUILD='$(AR)' >>> AR_FOR_TARGET='/mnt/clfs/cross-tools/arm-linux-musleabihf/bin/ar' >>> AS='as' >>> AS_FOR_BUILD='$(AS)' >>> AS_FOR_TARGET='/mnt/clfs/cross-tools/arm-linux-musleabihf/bin/as' >>> AWK='gawk' >>> BISON='bison' >>> BUILD_CONFIG='' >>> CC='gcc' >>> CC_FOR_BUILD='$(CC)' >>> CC_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/xgcc -B$$r/$(HOST_SUBDIR)/gcc/' >>> CFLAGS='-g -O2' >>> CFLAGS_FOR_BUILD='-g -O2' >>> CFLAGS_FOR_TARGET='-g -O2' >>> COMPILER_AS_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/as' >>> COMPILER_LD_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/collect-ld' >>> COMPILER_NM_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/nm' >>> CONFIGURE_GDB_TK='' >>> CPPFLAGS='' >>> CXX='g++' >>> CXXFLAGS='-g -O2' >>> CXXFLAGS_FOR_BUILD='-g -O2' >>> CXXFLAGS_FOR_TARGET='-g -O2' >>> CXX_FOR_BUILD='$(CXX)' >>> CXX_FOR_TARGET='arm-linux-musleabihf-c++' >>> DEBUG_PREFIX_CFLAGS_FOR_TARGET='' >>> DEFS='-DPACKAGE_NAME=\"\" -DPACKAGE_TARNAME=\"\" -DPACKAGE_VERSION=\"\" -DPACKAGE_STRING=\"\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE_URL=\"\" -DLT_OBJDIR=\".libs/\"' >>> DLLTOOL='dlltool' >>> DLLTOOL_FOR_BUILD='$(DLLTOOL)' >>> DLLTOOL_FOR_TARGET='arm-linux-musleabihf-dlltool' >>> ECHO_C='' >>> ECHO_N='-n' >>> ECHO_T='' >>> EXEEXT='' >>> EXPECT='expect' >>> FLAGS_FOR_TARGET=' -B$(build_tooldir)/bin/ -B$(build_tooldir)/lib/ -isystem $(build_tooldir)/include -isystem $(build_tooldir)/sys-include' >>> FLEX='flex' >>> GCC_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/xgcc -B$$r/$(HOST_SUBDIR)/gcc/' >>> GCC_SHLIB_SUBDIR='' >>> GDB_TK='' >>> GDC_FOR_BUILD='$(GDC)' >>> GDC_FOR_TARGET='arm-linux-musleabihf-gdc' >>> GFORTRAN_FOR_BUILD='$(GFORTRAN)' >>> GFORTRAN_FOR_TARGET='arm-linux-musleabihf-gfortran' >>> GNATBIND='no' >>> GNATMAKE='no' >>> GOC_FOR_BUILD='$(GOC)' >>> GOC_FOR_TARGET='arm-linux-musleabihf-gccgo' >>> INSTALL_DATA='${INSTALL} -m 644' >>> INSTALL_GDB_TK='' >>> INSTALL_PROGRAM='${INSTALL}' >>> INSTALL_SCRIPT='${INSTALL}' >>> LD='ld' >>> LDFLAGS='' >>> LDFLAGS_FOR_BUILD='' >>> LDFLAGS_FOR_TARGET='' >>> LD_FOR_BUILD='$(LD)' >>> LD_FOR_TARGET='/mnt/clfs/cross-tools/arm-linux-musleabihf/bin/ld' >>> LEX='flex' >>> LIBOBJS='' >>> LIBS='' >>> LIPO='lipo' >>> LIPO_FOR_TARGET='arm-linux-musleabihf-lipo' >>> LN='ln' >>> LN_S='ln -s' >>> LTLIBOBJS='' >>> M4='m4' >>> MAINT='#' >>> MAINTAINER_MODE_FALSE='' >>> MAINTAINER_MODE_TRUE='#' >>> MAKEINFO='makeinfo' >>> NM='nm' >>> NM_FOR_BUILD='$(NM)' >>> NM_FOR_TARGET='/mnt/clfs/cross-tools/arm-linux-musleabihf/bin/nm' >>> OBJCOPY='objcopy' >>> OBJCOPY_FOR_TARGET='/mnt/clfs/cross-tools/arm-linux-musleabihf/bin/objcopy' >>> OBJDUMP='objdump' >>> OBJDUMP_FOR_TARGET='/mnt/clfs/cross-tools/arm-linux-musleabihf/bin/objdump' >>> OBJEXT='o' >>> OTOOL='otool' >>> OTOOL_FOR_TARGET='arm-linux-musleabihf-otool' >>> PACKAGE_BUGREPORT='' >>> PACKAGE_NAME='' >>> PACKAGE_STRING='' >>> PACKAGE_TARNAME='' >>> PACKAGE_URL='' >>> PACKAGE_VERSION='' >>> PATH_SEPARATOR=':' >>> RANLIB='ranlib' >>> RANLIB_FOR_BUILD='$(RANLIB)' >>> RANLIB_FOR_TARGET='/mnt/clfs/cross-tools/arm-linux-musleabihf/bin/ranlib' >>> RAW_CXX_FOR_TARGET='arm-linux-musleabihf-c++' >>> READELF='readelf' >>> READELF_FOR_TARGET='/mnt/clfs/cross-tools/arm-linux-musleabihf/bin/readelf' >>> RPATH_ENVVAR='LD_LIBRARY_PATH' >>> RUNTEST='runtest' >>> SED='/bin/sed' >>> SHELL='/bin/bash' >>> STRIP='strip' >>> STRIP_FOR_TARGET='/mnt/clfs/cross-tools/arm-linux-musleabihf/bin/strip' >>> SYSROOT_CFLAGS_FOR_TARGET='' >>> TOPLEVEL_CONFIGURE_ARGUMENTS='../gcc-9.2.0/configure --prefix=/mnt/clfs/cross-tools --build=x86_64-cross-linux-gnu --host=x86_64-cross-linux-gnu --target=arm-linux-musleabihf --with-sysroot=/mnt/clfs/cross-tools/arm-linux-musleabihf --disable-nls --disable-shared --without-headers --with-newlib --disable-decimal-float --disable-libgomp --disable-libmudflap --disable-libssp --disable-libatomic --disable-libquadmath --disable-threads --enable-languages=c --enable-multilib --with-mpfr-include=/mnt/clfs/sources/gcc-build/../gcc-9.2.0/mpfr/src --with-mpfr-lib=/mnt/clfs/sources/gcc-build/mpfr/src/.libs --with-multilib-list=rmprofile' >>> WINDMC='windmc' >>> WINDMC_FOR_BUILD='$(WINDMC)' >>> WINDMC_FOR_TARGET='arm-linux-musleabihf-windmc' >>> WINDRES='windres' >>> WINDRES_FOR_BUILD='$(WINDRES)' >>> WINDRES_FOR_TARGET='arm-linux-musleabihf-windres' >>> YACC='bison -y' >>> ac_ct_CC='gcc' >>> ac_ct_CXX='g++' >>> bindir='${exec_prefix}/bin' >>> build='x86_64-cross-linux-gnu' >>> build_alias='x86_64-cross-linux-gnu' >>> build_configargs=' --cache-file=./config.cache '\''--prefix=/mnt/clfs/cross-tools'\'' '\''--with-sysroot=/mnt/clfs/cross-tools/arm-linux-musleabihf'\'' '\''--disable-nls'\'' '\''--disable-shared'\'' '\''--without-headers'\'' '\''--with-newlib'\'' '\''--disable-decimal-float'\'' '\''--disable-libgomp'\'' '\''--disable-libmudflap'\'' '\''--disable-libssp'\'' '\''--disable-libatomic'\'' '\''--disable-libquadmath'\'' '\''--disable-threads'\'' '\''--enable-multilib'\'' '\''--with-mpfr-include=/mnt/clfs/sources/gcc-build/../gcc-9.2.0/mpfr/src'\'' '\''--with-mpfr-lib=/mnt/clfs/sources/gcc-build/mpfr/src/.libs'\'' '\''--with-multilib-list=rmprofile'\'' '\''--enable-languages=c,lto'\'' --program-transform-name='\''s&^&arm-linux-musleabihf-&'\'' --disable-option-checking' >>> build_configdirs=' libiberty libcpp fixincludes' >>> build_cpu='x86_64' >>> build_libsubdir='build-x86_64-cross-linux-gnu' >>> build_noncanonical='x86_64-cross-linux-gnu' >>> build_os='linux-gnu' >>> build_subdir='build-x86_64-cross-linux-gnu' >>> build_tooldir='${exec_prefix}/arm-linux-musleabihf' >>> build_vendor='cross' >>> compare_exclusions='gcc/cc*-checksum$(objext) | gcc/ada/*tools/*' >>> configdirs=' intl libiberty zlib libbacktrace libcpp libdecnumber gmp mpfr mpc fixincludes gcc libcc1 lto-plugin' >>> datadir='${datarootdir}' >>> datarootdir='${prefix}/share' >>> do_compare='cmp --ignore-initial=16 $$f1 $$f2' >>> docdir='${datarootdir}/doc/${PACKAGE}' >>> dvidir='${docdir}' >>> exec_prefix='${prefix}' >>> extra_host_libiberty_configure_flags='--enable-shared' >>> extra_host_zlib_configure_flags='' >>> extra_isl_gmp_configure_flags='--with-gmp-builddir=$$r/$(HOST_SUBDIR)/gmp' >>> extra_liboffloadmic_configure_flags='' >>> extra_linker_plugin_configure_flags='' >>> extra_linker_plugin_flags='' >>> extra_mpc_gmp_configure_flags='--with-gmp-include=$$r/$(HOST_SUBDIR)/gmp --with-gmp-lib=$$r/$(HOST_SUBDIR)/gmp/.libs' >>> extra_mpc_mpfr_configure_flags='' >>> extra_mpfr_configure_flags='--with-gmp-include=$$r/$(HOST_SUBDIR)/gmp --with-gmp-lib=$$r/$(HOST_SUBDIR)/gmp/.libs' >>> get_gcc_base_ver='cat' >>> gmpinc='-I$$r/$(HOST_SUBDIR)/gmp -I$$s/gmp -I/mnt/clfs/sources/gcc-build/../gcc-9.2.0/mpfr/src -I$$s/mpc/src ' >>> gmplibs='-L$$r/$(HOST_SUBDIR)/gmp/.libs -L/mnt/clfs/sources/gcc-build/mpfr/src/.libs -L$$r/$(HOST_SUBDIR)/mpc/src/.libs -lmpc -lmpfr -lgmp' >>> host='x86_64-cross-linux-gnu' >>> host_alias='x86_64-cross-linux-gnu' >>> host_configargs=' --cache-file=./config.cache '\''--prefix=/mnt/clfs/cross-tools'\'' '\''--with-sysroot=/mnt/clfs/cross-tools/arm-linux-musleabihf'\'' '\''--disable-nls'\'' '\''--disable-shared'\'' '\''--without-headers'\'' '\''--with-newlib'\'' '\''--disable-decimal-float'\'' '\''--disable-libgomp'\'' '\''--disable-libmudflap'\'' '\''--disable-libssp'\'' '\''--disable-libatomic'\'' '\''--disable-libquadmath'\'' '\''--disable-threads'\'' '\''--enable-multilib'\'' '\''--with-mpfr-include=/mnt/clfs/sources/gcc-build/../gcc-9.2.0/mpfr/src'\'' '\''--with-mpfr-lib=/mnt/clfs/sources/gcc-build/mpfr/src/.libs'\'' '\''--with-multilib-list=rmprofile'\'' '\''--enable-languages=c,lto'\'' --program-transform-name='\''s&^&arm-linux-musleabihf-&'\'' --disable-option-checking' >>> host_cpu='x86_64' >>> host_noncanonical='x86_64-cross-linux-gnu' >>> host_os='linux-gnu' >>> host_shared='no' >>> host_subdir='.' >>> host_vendor='cross' >>> htmldir='${docdir}' >>> includedir='${prefix}/include' >>> infodir='${datarootdir}/info' >>> islinc='' >>> isllibs='' >>> libdir='${exec_prefix}/lib' >>> libexecdir='${exec_prefix}/libexec' >>> localedir='${datarootdir}/locale' >>> localstatedir='${prefix}/var' >>> mandir='${datarootdir}/man' >>> oldincludedir='/usr/include' >>> pdfdir='${docdir}' >>> poststage1_ldflags='-static-libstdc++ -static-libgcc' >>> poststage1_libs='' >>> prefix='/mnt/clfs/cross-tools' >>> program_transform_name='s&^&arm-linux-musleabihf-&' >>> psdir='${docdir}' >>> sbindir='${exec_prefix}/sbin' >>> sharedstatedir='${prefix}/com' >>> stage1_cflags='-g' >>> stage1_checking='--enable-checking=yes,types' >>> stage1_languages='c,lto' >>> stage1_ldflags='-static-libstdc++ -static-libgcc' >>> stage1_libs='' >>> stage2_werror_flag='' >>> sysconfdir='${prefix}/etc' >>> target='arm-unknown-linux-musleabihf' >>> target_alias='arm-linux-musleabihf' >>> target_configargs='--cache-file=./config.cache --with-cross-host=x86_64-cross-linux-gnu '\''--prefix=/mnt/clfs/cross-tools'\'' '\''--with-sysroot=/mnt/clfs/cross-tools/arm-linux-musleabihf'\'' '\''--disable-nls'\'' '\''--disable-shared'\'' '\''--without-headers'\'' '\''--with-newlib'\'' '\''--disable-decimal-float'\'' '\''--disable-libgomp'\'' '\''--disable-libmudflap'\'' '\''--disable-libssp'\'' '\''--disable-libatomic'\'' '\''--disable-libquadmath'\'' '\''--disable-threads'\'' '\''--enable-multilib'\'' '\''--with-multilib-list=rmprofile'\'' '\''--enable-languages=c,lto'\'' --program-transform-name='\''s&^&arm-linux-musleabihf-&'\'' --disable-option-checking' >>> target_configdirs=' libgcc' >>> target_cpu='arm' >>> target_noncanonical='arm-linux-musleabihf' >>> target_os='linux-musleabihf' >>> target_subdir='arm-linux-musleabihf' >>> target_vendor='unknown' >>> tooldir='${exec_prefix}/arm-linux-musleabihf' >>> >>> ## ------------------- ## >>> ## File substitutions. ## >>> ## ------------------- ## >>> >>> alphaieee_frag='/dev/null' >>> host_makefile_frag='/dev/null' >>> ospace_frag='/dev/null' >>> serialization_dependencies='serdep.tmp' >>> target_makefile_frag='../gcc-9.2.0/config/mt-gnu' >>> >>> ## ----------- ## >>> ## confdefs.h. ## >>> ## ----------- ## >>> >>> /* confdefs.h */ >>> #define PACKAGE_NAME "" >>> #define PACKAGE_TARNAME "" >>> #define PACKAGE_VERSION "" >>> #define PACKAGE_STRING "" >>> #define PACKAGE_BUGREPORT "" >>> #define PACKAGE_URL "" >>> #define LT_OBJDIR ".libs/" >>> >>> configure: exit 0 >>> >>> What could be the problem? >>> --------------------------------------------------------------- >>> On Mon, Nov 11, 2019 at 01:42:43PM +0000, Richard Earnshaw (lists) wrote: >>>> On 11/11/2019 13:33, sayed israr wrote: >>>>> ---------- Forwarded message --------- >>>>> From: Israr Sayed <sd.israr@gmail.com> >>>>> Date: Mon, Nov 11, 2019 at 5:38 PM >>>>> Subject: Re: Is it possible to build Single GCC Executable for armv5, >>>>> armv6, armv7-{cortex-xx-{A,R,M}},armv8 etc.? >>>>> To: Jonathan Wakely <jwakely.gcc@gmail.com> >>>>> >>>>> >>>>> I am building GCC from sources.Where i can configure it with 2 ways: >>>>> (1) --with-arch --with-cpu --with-fpu --with-float options . >>>>> (2) --with-multilib-list= . >>>>> In --with-multilib-list, we can configure for various combinations of >>>>> armv*-*-*. >>>>> For example, I want to build gcc for with arch = armv7, armv7-m, armv7e-m, >>>>> with float = hard, softfp, soft. >>>>> with fpu = fpv, fpv4, fpv4-d16 etc.. >>>>> whereas if in configure i mention --with-arch --with-fpu --with-float.That >>>>> will build GCC for those options only. >>>>> I have a prebuilt arm GCC binary for STM32F controllers, which is built for >>>>> whole range of armv7-M, armv7e-m along with FPUs. >>>>> there configure options show --with-multilib-list=rmprofile. >>>>> rmprofile is the multilib option for configure.Which is exactly what >>>>> gcc/config/arm/t-rmprofile file is about. >>>>> I hope i can explain my question better. >>>> >>>> You can configure the compiler with --with-multlib-list=xxx >>>> >>>> where xxx is any of "aprofile", "rmprofile" and "aprofile,rmprofile" >>>> >>>> If you do this, DO NOT specify any of --with-fpu, --with-cpu, --with-tune or >>>> --with-arch. >>>> >>>> Be warned, the full set of multilibs is LARGE. It requires a fast machine >>>> and/or a lot of time to build them all. >>>> >>>> You can, of course, edit any of the files - the GPL gives you that right, >>>> but if you do so, you're most likely on your own. The multilib >>>> configurations are complex and rely heavily on GNU Makefile trickery to >>>> express all the required combinations. >>>> >>>> R. >>>> >>>>> ------------------------------------------------------ >>>>> >>>>> On Mon, Nov 11, 2019 at 11:40:39AM +0000, Jonathan Wakely wrote: >>>>>> On Sun, 10 Nov 2019 at 11:36, Israr Sayed <sd.israr@gmail.com> wrote: >>>>>>> >>>>>>> Digging into the sources of GCC I noticed in files gcc/config/arm/t-*, >>>>> There are multiple arm target options. >>>>>>> >>>>>>> Reading [GCC internal Manual], These are called Target Makefile >>>>> Fragments, which will be included in main Makefile, like MULTILIB_OPTIONS, >>>>> MULTILIB_DIRNAMES, MULTILIB_MATCHES, MULTILIB_REQUIRED, MULTILIB_REUSE, >>>>> MULTILIB_EXTRA_OPTS, MULTILIB_OSDIRNAMES, MULTIARCH_DIRNAME. >>>>>>> >>>>>>> What I am not able to understand that how to bring it in at the time of >>>>> configure.Which option to choose? >>>>>>> >>>>>>> More over is it possible to edit those t-* files as per the requirement >>>>> and how? >>>>>>> Please Help. >>>>>> >>>>>> I don't understand your question. Your email's subject talks about a >>>>>> single GCC executable for multiple ARM variants, which is supported >>>>>> automatically. When you configure GCC for an ARM target you can select >>>>>> the specific processor type using the -march and/or -mcpu options. See >>>>>> the documentation of command-line options in the GCC manual. >>>>>> >>>>>> You don't need to do anything special to use the target makefile >>>>>> fragments, they're used automatically, as needed. >>>> >> ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: Fwd: Is it possible to build Single GCC Executable for armv5, armv6, armv7-{cortex-xx-{A,R,M}},armv8 etc.? 2019-11-18 15:53 ` Richard Earnshaw (lists) @ 2019-11-18 16:33 ` Israr Sayed 0 siblings, 0 replies; 9+ messages in thread From: Israr Sayed @ 2019-11-18 16:33 UTC (permalink / raw) To: Richard Earnshaw (lists); +Cc: gcc-help On Mon, Nov 18, 2019 at 03:53:00PM +0000, Richard Earnshaw (lists) wrote: > On 16/11/2019 23:07, Israr Sayed wrote: > > On Tue, Nov 12, 2019 at 10:00:08AM +0000, Richard Earnshaw (lists) wrote: > > > On 11/11/2019 17:49, Israr Sayed wrote: > > > > As per your instructions i tried to build the GCC.I got the following errors: > > > > /mnt/clfs/sources/gcc-build/./gcc/xgcc -B/mnt/clfs/sources/gcc-build/./gcc/ -B/mnt/clfs/cross-tools/arm-linux-musleabihf/bin/ -B/mnt/clfs/cross-tools/arm-linux-musleabihf/lib/ -isystem /mnt/clfs/cross-tools/arm-linux-musleabihf/include -isystem /mnt/clfs/cross-tools/arm-linux-musleabihf/sys-include -g -O2 -mthumb -march=armv6s-m -mfloat-abi=soft -O2 -g -O2 -DIN_GCC -DCROSS_DIRECTORY_STRUCTURE -W -Wall -Wno-narrowing -Wwrite-strings -Wcast-qual -Wstrict-prototypes -Wmissing-prototypes -Wold-style-definition -isystem ./include -fPIC -fno-inline -g -DIN_LIBGCC2 -fbuilding-libgcc -fno-stack-protector -Dinhibit_libc -fPIC -fno-inline -I. -I. -I../../../../.././gcc -I../../../../../../gcc-9.2.0/libgcc -I../../../../../../gcc-9.2.0/libgcc/. -I../../../../../../gcc-9.2.0/libgcc/../gcc -I../../../../../../gcc-9.2.0/libgcc/../include -DHAVE_CC_TLS -o _dvmd_lnx_s.o -MT _dvmd_lnx_s.o -MD -MP -MF _dvmd_lnx_s.dep -DSHARED -DL_dvmd_lnx -xassembler-with-cpp -c ../../../../../../gcc-9.2.0/libgcc/config/arm/lib1funcs.S > > > > ../../../../../../gcc-9.2.0/libgcc/config/arm/lib1funcs.S: Assembler messages: > > > > ../../../../../../gcc-9.2.0/libgcc/config/arm/lib1funcs.S:1482: Error: bad instruction `arm_func_start aeabi_idiv0' > > > > ../../../../../../gcc-9.2.0/libgcc/config/arm/lib1funcs.S:1483: Error: bad instruction `arm_func_start aeabi_ldiv0' > > > > ../../../../../../gcc-9.2.0/libgcc/config/arm/lib1funcs.S:1484: Error: selected processor does not support `stmfd sp!,{r1,lr}' in Thumb mode > > > > ../../../../../../gcc-9.2.0/libgcc/config/arm/lib1funcs.S:1495: Error: lo register required -- `ldmia sp!,{r1,pc}' > > > > ../../../../../../gcc-9.2.0/libgcc/config/arm/lib1funcs.S:1485: Error: invalid operands (.text and *UND* sections) for `-' > > > > ../../../../../../gcc-9.2.0/libgcc/config/arm/lib1funcs.S:1479: Error: can't resolve `.text' {.text section} - `__aeabi_ldiv0' {*UND* section} > > > > /tmp/cc0Si52Z.s: Error: .size expression for __aeabi_ldiv0 does not evaluate to a constant > > > > /tmp/cc0Si52Z.s: Error: .size expression for __aeabi_idiv0 does not evaluate to a constant > > > > make[3]: *** [Makefile:488: _dvmd_lnx_s.o] Error 1 > > > > make[3]: Leaving directory '/mnt/clfs/sources/gcc-build/arm-linux-musleabihf/thumb/v6-m/nofp/libgcc' > > > > make[2]: *** [Makefile:1210: multi-do] Error 1 > > > > make[2]: Leaving directory '/mnt/clfs/sources/gcc-build/arm-linux-musleabihf/libgcc' > > > > make[1]: *** [Makefile:127: all-multi] Error 2 > > > > make[1]: Leaving directory '/mnt/clfs/sources/gcc-build/arm-linux-musleabihf/libgcc' > > > > make: *** [Makefile:12499: all-target-libgcc] Error 2 > > > > ---------------------------------------------------------- > > > > Config.log: > > > > This file contains any messages produced by compilers while > > > > running configure, to aid debugging if configure makes a mistake. > > > > > > > > It was created by configure, which was > > > > generated by GNU Autoconf 2.69. Invocation command line was > > > > > > > > $ ../gcc-9.2.0/configure --prefix=/mnt/clfs/cross-tools --build=x86_64-cross-linux-gnu --host=x86_64-cross-linux-gnu --target=arm-linux-musleabihf --with-sysroot=/mnt/clfs/cross-tools/arm-linux-musleabihf --disable-nls --disable-shared --without-headers --with-newlib --disable-decimal-float --disable-libgomp --disable-libmudflap --disable-libssp --disable-libatomic --disable-libquadmath --disable-threads --enable-languages=c --enable-multilib --with-mpfr-include=/mnt/clfs/sources/gcc-build/../gcc-9.2.0/mpfr/src --with-mpfr-lib=/mnt/clfs/sources/gcc-build/mpfr/src/.libs --with-multilib-list=rmprofile > > > > > > > > > > Sorry, I should have said that these multilib configs have only been tested > > > with bare metal tools (arm-none-eabi). The error you are seeing is because > > > the Linux configurations assume that the Arm instruction set exists and on > > > M-profile devices this is not true. > > > > > > Standard linux configurations also assume the presence of an MMU and no > > > M-profile devices support this. > > > > > > R. > > > > > > > So, both the 2 conditions i.e. ARM Instructions Set and presence of MMU, M and R Profile devices Lack. > > Onyly ARMv7-A Profile Devices have both the capabilities. > > So, My Question is ,Is it then possible to build the GCC with Multilib for A Profile devices, > > Using --with-multilib-list=aprofile ? > > > > That should certainly work for bare-metal configurations (eg arm-none-eabi); > that's the intended use case. It may work for arm-linux-gnueabi > configurations as well, but I haven't tried that. > > R. I will definitely try to build GCC --with-multilib-list=aprofile and come back to you soon. Thanks > > > > > ## --------- ## > > > > ## Platform. ## > > > > ## --------- ## > > > > > > > > hostname = hib > > > > uname -m = x86_64 > > > > uname -r = 5.3.0-19-generic > > > > uname -s = Linux > > > > uname -v = #20-Ubuntu SMP Fri Oct 18 09:04:39 UTC 2019 > > > > > > > > /usr/bin/uname -p = x86_64 > > > > /bin/uname -X = unknown > > > > > > > > /bin/arch = x86_64 > > > > /usr/bin/arch -k = unknown > > > > /usr/convex/getsysinfo = unknown > > > > /usr/bin/hostinfo = unknown > > > > /bin/machine = unknown > > > > /usr/bin/oslevel = unknown > > > > /bin/universe = unknown > > > > > > > > PATH: /mnt/clfs/cross-tools/bin > > > > PATH: /bin > > > > PATH: /usr/bin > > > > > > > > > > > > ## ----------- ## > > > > ## Core tests. ## > > > > ## ----------- ## > > > > > > > > configure:2348: checking build system type > > > > configure:2362: result: x86_64-cross-linux-gnu > > > > configure:2409: checking host system type > > > > configure:2422: result: x86_64-cross-linux-gnu > > > > configure:2442: checking target system type > > > > configure:2455: result: arm-unknown-linux-musleabihf > > > > configure:2509: checking for a BSD-compatible install > > > > configure:2577: result: /bin/install -c > > > > configure:2588: checking whether ln works > > > > configure:2610: result: yes > > > > configure:2614: checking whether ln -s works > > > > configure:2618: result: yes > > > > configure:2625: checking for a sed that does not truncate output > > > > configure:2689: result: /bin/sed > > > > configure:2698: checking for gawk > > > > configure:2714: found /bin/gawk > > > > configure:2725: result: gawk > > > > configure:3257: checking for libitm support > > > > configure:3267: result: yes > > > > configure:3276: checking for libsanitizer support > > > > configure:3286: result: yes > > > > configure:3295: checking for libvtv support > > > > configure:3305: result: yes > > > > configure:3315: checking for libhsail-rt support > > > > configure:3321: result: no > > > > configure:3406: checking for libphobos support > > > > configure:3416: result: yes > > > > configure:4036: checking for x86_64-cross-linux-gnu-gcc > > > > configure:4066: result: no > > > > configure:4076: checking for gcc > > > > configure:4092: found /bin/gcc > > > > configure:4103: result: gcc > > > > configure:4332: checking for C compiler version > > > > configure:4341: gcc --version >&5 > > > > gcc (Ubuntu 9.2.1-9ubuntu2) 9.2.1 20191008 > > > > Copyright (C) 2019 Free Software Foundation, Inc. > > > > This is free software; see the source for copying conditions. There is NO > > > > warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. > > > > > > > > configure:4352: $? = 0 > > > > configure:4341: gcc -v >&5 > > > > Using built-in specs. > > > > COLLECT_GCC=gcc > > > > COLLECT_LTO_WRAPPER=/usr/lib/gcc/x86_64-linux-gnu/9/lto-wrapper > > > > OFFLOAD_TARGET_NAMES=nvptx-none:hsa > > > > OFFLOAD_TARGET_DEFAULT=1 > > > > Target: x86_64-linux-gnu > > > > Configured with: ../src/configure -v --with-pkgversion='Ubuntu 9.2.1-9ubuntu2' --with-bugurl=file:///usr/share/doc/gcc-9/README.Bugs --enable-languages=c,ada,c++,go,brig,d,fortran,objc,obj-c++,gm2 --prefix=/usr --with-gcc-major-version-only --program-suffix=-9 --program-prefix=x86_64-linux-gnu- --enable-shared --enable-linker-build-id --libexecdir=/usr/lib --without-included-gettext --enable-threads=posix --libdir=/usr/lib --enable-nls --enable-bootstrap --enable-clocale=gnu --enable-libstdcxx-debug --enable-libstdcxx-time=yes --with-default-libstdcxx-abi=new --enable-gnu-unique-object --disable-vtable-verify --enable-plugin --enable-default-pie --with-system-zlib --with-target-system-zlib=auto --enable-multiarch --disable-werror --with-arch-32=i686 --with-abi=m64 --with-multilib-list=m32,m64,mx32 --enable-multilib --with-tune=generic --enable-offload-targets=nvptx-none,hsa --without-cuda-driver --enable-checking=release --build=x86_64-linux-gnu --host=x86_64-linux-gnu --target=x86_64-linux-gnu > > > > Thread model: posix > > > > gcc version 9.2.1 20191008 (Ubuntu 9.2.1-9ubuntu2) > > > > configure:4352: $? = 0 > > > > configure:4341: gcc -V >&5 > > > > gcc: error: unrecognized command line option '-V' > > > > gcc: fatal error: no input files > > > > compilation terminated. > > > > configure:4352: $? = 1 > > > > configure:4341: gcc -qversion >&5 > > > > gcc: error: unrecognized command line option '-qversion'; did you mean '--version'? > > > > gcc: fatal error: no input files > > > > compilation terminated. > > > > configure:4352: $? = 1 > > > > configure:4372: checking whether the C compiler works > > > > configure:4394: gcc conftest.c >&5 > > > > configure:4398: $? = 0 > > > > configure:4446: result: yes > > > > configure:4449: checking for C compiler default output file name > > > > configure:4451: result: a.out > > > > configure:4457: checking for suffix of executables > > > > configure:4464: gcc -o conftest conftest.c >&5 > > > > configure:4468: $? = 0 > > > > configure:4490: result: > > > > configure:4512: checking whether we are cross compiling > > > > configure:4520: gcc -o conftest conftest.c >&5 > > > > configure:4524: $? = 0 > > > > configure:4531: ./conftest > > > > configure:4535: $? = 0 > > > > configure:4523: result: no > > > > configure:4528: checking for suffix of object files > > > > configure:4550: gcc -c conftest.c >&5 > > > > configure:4554: $? = 0 > > > > configure:4575: result: o > > > > configure:4579: checking whether we are using the GNU C compiler > > > > configure:4598: gcc -c conftest.c >&5 > > > > configure:4598: $? = 0 > > > > configure:4607: result: yes > > > > configure:4616: checking whether gcc accepts -g > > > > configure:4636: gcc -c -g conftest.c >&5 > > > > configure:4636: $? = 0 > > > > configure:4677: result: yes > > > > configure:4694: checking for gcc option to accept ISO C89 > > > > configure:4757: gcc -c -g -O2 conftest.c >&5 > > > > configure:4757: $? = 0 > > > > configure:4770: result: none needed > > > > configure:4804: checking for x86_64-cross-linux-gnu-g++ > > > > configure:4834: result: no > > > > configure:4804: checking for x86_64-cross-linux-gnu-c++ > > > > configure:4834: result: no > > > > configure:4804: checking for x86_64-cross-linux-gnu-gpp > > > > configure:4834: result: no > > > > configure:4804: checking for x86_64-cross-linux-gnu-aCC > > > > configure:4834: result: no > > > > configure:4804: checking for x86_64-cross-linux-gnu-CC > > > > configure:4834: result: no > > > > configure:4804: checking for x86_64-cross-linux-gnu-cxx > > > > configure:4834: result: no > > > > configure:4804: checking for x86_64-cross-linux-gnu-cc++ > > > > configure:4834: result: no > > > > configure:4804: checking for x86_64-cross-linux-gnu-cl.exe > > > > configure:4834: result: no > > > > configure:4804: checking for x86_64-cross-linux-gnu-FCC > > > > configure:4834: result: no > > > > configure:4804: checking for x86_64-cross-linux-gnu-KCC > > > > configure:4834: result: no > > > > configure:4804: checking for x86_64-cross-linux-gnu-RCC > > > > configure:4834: result: no > > > > configure:4804: checking for x86_64-cross-linux-gnu-xlC_r > > > > configure:4834: result: no > > > > configure:4804: checking for x86_64-cross-linux-gnu-xlC > > > > configure:4834: result: no > > > > configure:4848: checking for g++ > > > > configure:4864: found /bin/g++ > > > > configure:4875: result: g++ > > > > configure:4902: checking for C++ compiler version > > > > configure:4911: g++ --version >&5 > > > > g++ (Ubuntu 9.2.1-9ubuntu2) 9.2.1 20191008 > > > > Copyright (C) 2019 Free Software Foundation, Inc. > > > > This is free software; see the source for copying conditions. There is NO > > > > warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. > > > > > > > > configure:4922: $? = 0 > > > > configure:4911: g++ -v >&5 > > > > Using built-in specs. > > > > COLLECT_GCC=g++ > > > > COLLECT_LTO_WRAPPER=/usr/lib/gcc/x86_64-linux-gnu/9/lto-wrapper > > > > OFFLOAD_TARGET_NAMES=nvptx-none:hsa > > > > OFFLOAD_TARGET_DEFAULT=1 > > > > Target: x86_64-linux-gnu > > > > Configured with: ../src/configure -v --with-pkgversion='Ubuntu 9.2.1-9ubuntu2' --with-bugurl=file:///usr/share/doc/gcc-9/README.Bugs --enable-languages=c,ada,c++,go,brig,d,fortran,objc,obj-c++,gm2 --prefix=/usr --with-gcc-major-version-only --program-suffix=-9 --program-prefix=x86_64-linux-gnu- --enable-shared --enable-linker-build-id --libexecdir=/usr/lib --without-included-gettext --enable-threads=posix --libdir=/usr/lib --enable-nls --enable-bootstrap --enable-clocale=gnu --enable-libstdcxx-debug --enable-libstdcxx-time=yes --with-default-libstdcxx-abi=new --enable-gnu-unique-object --disable-vtable-verify --enable-plugin --enable-default-pie --with-system-zlib --with-target-system-zlib=auto --enable-multiarch --disable-werror --with-arch-32=i686 --with-abi=m64 --with-multilib-list=m32,m64,mx32 --enable-multilib --with-tune=generic --enable-offload-targets=nvptx-none,hsa --without-cuda-driver --enable-checking=release --build=x86_64-linux-gnu --host=x86_64-linux-gnu --target=x86_64-linux-gnu > > > > Thread model: posix > > > > gcc version 9.2.1 20191008 (Ubuntu 9.2.1-9ubuntu2) > > > > configure:4922: $? = 0 > > > > configure:4911: g++ -V >&5 > > > > g++: error: unrecognized command line option '-V' > > > > g++: fatal error: no input files > > > > compilation terminated. > > > > configure:4922: $? = 1 > > > > configure:4911: g++ -qversion >&5 > > > > g++: error: unrecognized command line option '-qversion'; did you mean '--version'? > > > > g++: fatal error: no input files > > > > compilation terminated. > > > > configure:4922: $? = 1 > > > > configure:4926: checking whether we are using the GNU C++ compiler > > > > configure:4945: g++ -c conftest.cpp >&5 > > > > configure:4945: $? = 0 > > > > configure:4954: result: yes > > > > configure:4963: checking whether g++ accepts -g > > > > configure:4983: g++ -c -g conftest.cpp >&5 > > > > configure:4983: $? = 0 > > > > configure:5024: result: yes > > > > configure:5073: checking whether g++ accepts -static-libstdc++ -static-libgcc > > > > configure:5090: g++ -o conftest -g -O2 -static-libstdc++ -static-libgcc conftest.cpp >&5 > > > > configure:5090: $? = 0 > > > > configure:5091: result: yes > > > > configure:5115: checking for x86_64-cross-linux-gnu-gnatbind > > > > configure:5145: result: no > > > > configure:5155: checking for gnatbind > > > > configure:5185: result: no > > > > configure:5207: checking for x86_64-cross-linux-gnu-gnatmake > > > > configure:5237: result: no > > > > configure:5247: checking for gnatmake > > > > configure:5277: result: no > > > > configure:5296: checking whether compiler driver understands Ada > > > > configure:5319: result: no > > > > configure:5328: checking how to compare bootstrapped objects > > > > configure:5353: result: cmp --ignore-initial=16 $$f1 $$f2 > > > > configure:5413: checking for objdir > > > > configure:5428: result: .libs > > > > configure:5976: checking for isl 0.15 or later > > > > configure:5989: gcc -o conftest -g -O2 -I$$r/$(HOST_SUBDIR)/gmp -I$$s/gmp -I/mnt/clfs/sources/gcc-build/../gcc-9.2.0/mpfr/src -I$$s/mpc/src -lisl -L$$r/$(HOST_SUBDIR)/gmp/.libs -L/mnt/clfs/sources/gcc-build/mpfr/src/.libs -L$$r/$(HOST_SUBDIR)/mpc/src/.libs -lmpc -lmpfr -lgmp conftest.c -lisl -lgmp >&5 > > > > conftest.c:10:10: fatal error: isl/schedule.h: No such file or directory > > > > 10 | #include <isl/schedule.h> > > > > | ^~~~~~~~~~~~~~~~ > > > > compilation terminated. > > > > configure:5989: $? = 1 > > > > configure: failed program was: > > > > | /* confdefs.h */ > > > > | #define PACKAGE_NAME "" > > > > | #define PACKAGE_TARNAME "" > > > > | #define PACKAGE_VERSION "" > > > > | #define PACKAGE_STRING "" > > > > | #define PACKAGE_BUGREPORT "" > > > > | #define PACKAGE_URL "" > > > > | #define LT_OBJDIR ".libs/" > > > > | /* end confdefs.h. */ > > > > | #include <isl/schedule.h> > > > > | int > > > > | main () > > > > | { > > > > | isl_options_set_schedule_serialize_sccs (NULL, 0); > > > > | ; > > > > | return 0; > > > > | } > > > > configure:5996: result: no > > > > configure:6000: result: required isl version is 0.15 or later > > > > configure:7093: checking for default BUILD_CONFIG > > > > configure:7125: result: > > > > configure:7130: checking for --enable-vtable-verify > > > > configure:7143: result: no > > > > configure:7744: checking for bison > > > > configure:7760: found /bin/bison > > > > configure:7771: result: bison -y > > > > configure:7791: checking for bison > > > > configure:7807: found /bin/bison > > > > configure:7818: result: bison > > > > configure:7838: checking for gm4 > > > > configure:7868: result: no > > > > configure:7838: checking for gnum4 > > > > configure:7868: result: no > > > > configure:7838: checking for m4 > > > > configure:7854: found /bin/m4 > > > > configure:7865: result: m4 > > > > configure:7885: checking for flex > > > > configure:7901: found /bin/flex > > > > configure:7912: result: flex > > > > configure:7933: checking for flex > > > > configure:7949: found /bin/flex > > > > configure:7960: result: flex > > > > configure:7980: checking for makeinfo > > > > configure:7996: found /bin/makeinfo > > > > configure:8007: result: makeinfo > > > > configure:8041: checking for expect > > > > configure:8057: found /bin/expect > > > > configure:8068: result: expect > > > > configure:8090: checking for runtest > > > > configure:8120: result: no > > > > configure:8196: checking for x86_64-cross-linux-gnu-ar > > > > configure:8226: result: no > > > > configure:8235: checking for ar > > > > configure:8251: found /bin/ar > > > > configure:8262: result: ar > > > > configure:8337: checking for x86_64-cross-linux-gnu-as > > > > configure:8367: result: no > > > > configure:8376: checking for as > > > > configure:8392: found /bin/as > > > > configure:8403: result: as > > > > configure:8478: checking for x86_64-cross-linux-gnu-dlltool > > > > configure:8508: result: no > > > > configure:8517: checking for dlltool > > > > configure:8547: result: no > > > > configure:8619: checking for x86_64-cross-linux-gnu-ld > > > > configure:8649: result: no > > > > configure:8658: checking for ld > > > > configure:8674: found /bin/ld > > > > configure:8685: result: ld > > > > configure:8760: checking for x86_64-cross-linux-gnu-lipo > > > > configure:8790: result: no > > > > configure:8799: checking for lipo > > > > configure:8829: result: no > > > > configure:8901: checking for x86_64-cross-linux-gnu-nm > > > > configure:8931: result: no > > > > configure:8940: checking for nm > > > > configure:8956: found /bin/nm > > > > configure:8967: result: nm > > > > configure:9042: checking for x86_64-cross-linux-gnu-ranlib > > > > configure:9072: result: no > > > > configure:9081: checking for ranlib > > > > configure:9097: found /bin/ranlib > > > > configure:9108: result: ranlib > > > > configure:9178: checking for x86_64-cross-linux-gnu-strip > > > > configure:9208: result: no > > > > configure:9217: checking for strip > > > > configure:9233: found /bin/strip > > > > configure:9244: result: strip > > > > configure:9314: checking for x86_64-cross-linux-gnu-windres > > > > configure:9344: result: no > > > > configure:9353: checking for windres > > > > configure:9383: result: no > > > > configure:9455: checking for x86_64-cross-linux-gnu-windmc > > > > configure:9485: result: no > > > > configure:9494: checking for windmc > > > > configure:9524: result: no > > > > configure:9596: checking for x86_64-cross-linux-gnu-objcopy > > > > configure:9626: result: no > > > > configure:9635: checking for objcopy > > > > configure:9651: found /bin/objcopy > > > > configure:9662: result: objcopy > > > > configure:9737: checking for x86_64-cross-linux-gnu-objdump > > > > configure:9767: result: no > > > > configure:9776: checking for objdump > > > > configure:9792: found /bin/objdump > > > > configure:9803: result: objdump > > > > configure:9878: checking for x86_64-cross-linux-gnu-otool > > > > configure:9908: result: no > > > > configure:9917: checking for otool > > > > configure:9947: result: no > > > > configure:10019: checking for x86_64-cross-linux-gnu-readelf > > > > configure:10049: result: no > > > > configure:10058: checking for readelf > > > > configure:10074: found /bin/readelf > > > > configure:10085: result: readelf > > > > configure:10199: checking for arm-linux-musleabihf-cc > > > > configure:10229: result: no > > > > configure:10199: checking for arm-linux-musleabihf-gcc > > > > configure:10229: result: no > > > > configure:10360: checking for arm-linux-musleabihf-c++ > > > > configure:10390: result: no > > > > configure:10360: checking for arm-linux-musleabihf-g++ > > > > configure:10390: result: no > > > > configure:10360: checking for arm-linux-musleabihf-cxx > > > > configure:10390: result: no > > > > configure:10360: checking for arm-linux-musleabihf-gxx > > > > configure:10390: result: no > > > > configure:10521: checking for arm-linux-musleabihf-gcc > > > > configure:10551: result: no > > > > configure:10677: checking for arm-linux-musleabihf-gfortran > > > > configure:10707: result: no > > > > configure:10838: checking for arm-linux-musleabihf-gccgo > > > > configure:10868: result: no > > > > configure:10999: checking for arm-linux-musleabihf-gdc > > > > configure:11029: result: no > > > > configure:11129: checking for ar > > > > configure:11147: found /mnt/clfs/cross-tools/arm-linux-musleabihf/bin/ar > > > > configure:11159: result: /mnt/clfs/cross-tools/arm-linux-musleabihf/bin/ar > > > > configure:11359: checking for as > > > > configure:11377: found /mnt/clfs/cross-tools/arm-linux-musleabihf/bin/as > > > > configure:11389: result: /mnt/clfs/cross-tools/arm-linux-musleabihf/bin/as > > > > configure:11589: checking for dlltool > > > > configure:11622: result: no > > > > configure:11700: checking for arm-linux-musleabihf-dlltool > > > > configure:11730: result: no > > > > configure:11819: checking for ld > > > > configure:11837: found /mnt/clfs/cross-tools/arm-linux-musleabihf/bin/ld > > > > configure:11849: result: /mnt/clfs/cross-tools/arm-linux-musleabihf/bin/ld > > > > configure:12049: checking for lipo > > > > configure:12082: result: no > > > > configure:12160: checking for arm-linux-musleabihf-lipo > > > > configure:12190: result: no > > > > configure:12279: checking for nm > > > > configure:12297: found /mnt/clfs/cross-tools/arm-linux-musleabihf/bin/nm > > > > configure:12309: result: /mnt/clfs/cross-tools/arm-linux-musleabihf/bin/nm > > > > configure:12509: checking for objcopy > > > > configure:12527: found /mnt/clfs/cross-tools/arm-linux-musleabihf/bin/objcopy > > > > configure:12539: result: /mnt/clfs/cross-tools/arm-linux-musleabihf/bin/objcopy > > > > configure:12739: checking for objdump > > > > configure:12757: found /mnt/clfs/cross-tools/arm-linux-musleabihf/bin/objdump > > > > configure:12769: result: /mnt/clfs/cross-tools/arm-linux-musleabihf/bin/objdump > > > > configure:12969: checking for otool > > > > configure:13002: result: no > > > > configure:13080: checking for arm-linux-musleabihf-otool > > > > configure:13110: result: no > > > > configure:13199: checking for ranlib > > > > configure:13217: found /mnt/clfs/cross-tools/arm-linux-musleabihf/bin/ranlib > > > > configure:13229: result: /mnt/clfs/cross-tools/arm-linux-musleabihf/bin/ranlib > > > > configure:13429: checking for readelf > > > > configure:13447: found /mnt/clfs/cross-tools/arm-linux-musleabihf/bin/readelf > > > > configure:13459: result: /mnt/clfs/cross-tools/arm-linux-musleabihf/bin/readelf > > > > configure:13659: checking for strip > > > > configure:13677: found /mnt/clfs/cross-tools/arm-linux-musleabihf/bin/strip > > > > configure:13689: result: /mnt/clfs/cross-tools/arm-linux-musleabihf/bin/strip > > > > configure:13889: checking for windres > > > > configure:13922: result: no > > > > configure:14000: checking for arm-linux-musleabihf-windres > > > > configure:14030: result: no > > > > configure:14119: checking for windmc > > > > configure:14152: result: no > > > > configure:14230: checking for arm-linux-musleabihf-windmc > > > > configure:14260: result: no > > > > configure:14327: checking where to find the target ar > > > > configure:14355: result: pre-installed in /mnt/clfs/cross-tools/arm-linux-musleabihf/bin > > > > configure:14369: checking where to find the target as > > > > configure:14397: result: pre-installed in /mnt/clfs/cross-tools/arm-linux-musleabihf/bin > > > > configure:14411: checking where to find the target cc > > > > configure:14434: result: just compiled > > > > configure:14453: checking where to find the target c++ > > > > configure:14493: result: pre-installed > > > > configure:14498: checking where to find the target c++ for libstdc++ > > > > configure:14538: result: pre-installed > > > > configure:14543: checking where to find the target dlltool > > > > configure:14580: result: pre-installed > > > > configure:14585: checking where to find the target gcc > > > > configure:14608: result: just compiled > > > > configure:14627: checking where to find the target gfortran > > > > configure:14667: result: pre-installed > > > > configure:14672: checking where to find the target gccgo > > > > configure:14712: result: pre-installed > > > > configure:14717: checking where to find the target gdc > > > > configure:14757: result: pre-installed > > > > configure:14762: checking where to find the target ld > > > > configure:14790: result: pre-installed in /mnt/clfs/cross-tools/arm-linux-musleabihf/bin > > > > configure:14804: checking where to find the target lipo > > > > configure:14830: result: pre-installed > > > > configure:14835: checking where to find the target nm > > > > configure:14863: result: pre-installed in /mnt/clfs/cross-tools/arm-linux-musleabihf/bin > > > > configure:14877: checking where to find the target objcopy > > > > configure:14905: result: pre-installed in /mnt/clfs/cross-tools/arm-linux-musleabihf/bin > > > > configure:14919: checking where to find the target objdump > > > > configure:14947: result: pre-installed in /mnt/clfs/cross-tools/arm-linux-musleabihf/bin > > > > configure:14961: checking where to find the target otool > > > > configure:14987: result: pre-installed > > > > configure:14992: checking where to find the target ranlib > > > > configure:15020: result: pre-installed in /mnt/clfs/cross-tools/arm-linux-musleabihf/bin > > > > configure:15034: checking where to find the target readelf > > > > configure:15062: result: pre-installed in /mnt/clfs/cross-tools/arm-linux-musleabihf/bin > > > > configure:15076: checking where to find the target strip > > > > configure:15104: result: pre-installed in /mnt/clfs/cross-tools/arm-linux-musleabihf/bin > > > > configure:15118: checking where to find the target windres > > > > configure:15155: result: pre-installed > > > > configure:15160: checking where to find the target windmc > > > > configure:15197: result: pre-installed > > > > configure:15230: checking whether to enable maintainer-specific portions of Makefiles > > > > configure:15239: result: no > > > > configure:15474: creating ./config.status > > > > > > > > ## ---------------------- ## > > > > ## Running config.status. ## > > > > ## ---------------------- ## > > > > > > > > This file was extended by config.status, which was > > > > generated by GNU Autoconf 2.69. Invocation command line was > > > > > > > > CONFIG_FILES = > > > > CONFIG_HEADERS = > > > > CONFIG_LINKS = > > > > CONFIG_COMMANDS = > > > > $ ./config.status > > > > > > > > on hib > > > > > > > > config.status:1016: creating Makefile > > > > > > > > ## ---------------- ## > > > > ## Cache variables. ## > > > > ## ---------------- ## > > > > > > > > ac_cv_build=x86_64-cross-linux-gnu > > > > ac_cv_c_compiler_gnu=yes > > > > ac_cv_cxx_compiler_gnu=yes > > > > ac_cv_env_AR_FOR_TARGET_set= > > > > ac_cv_env_AR_FOR_TARGET_value= > > > > ac_cv_env_AR_set= > > > > ac_cv_env_AR_value= > > > > ac_cv_env_AS_FOR_TARGET_set= > > > > ac_cv_env_AS_FOR_TARGET_value= > > > > ac_cv_env_AS_set= > > > > ac_cv_env_AS_value= > > > > ac_cv_env_CCC_set= > > > > ac_cv_env_CCC_value= > > > > ac_cv_env_CC_FOR_TARGET_set= > > > > ac_cv_env_CC_FOR_TARGET_value= > > > > ac_cv_env_CC_set= > > > > ac_cv_env_CC_value= > > > > ac_cv_env_CFLAGS_set= > > > > ac_cv_env_CFLAGS_value= > > > > ac_cv_env_CPPFLAGS_set= > > > > ac_cv_env_CPPFLAGS_value= > > > > ac_cv_env_CXXFLAGS_set= > > > > ac_cv_env_CXXFLAGS_value= > > > > ac_cv_env_CXX_FOR_TARGET_set= > > > > ac_cv_env_CXX_FOR_TARGET_value= > > > > ac_cv_env_CXX_set= > > > > ac_cv_env_CXX_value= > > > > ac_cv_env_DLLTOOL_FOR_TARGET_set= > > > > ac_cv_env_DLLTOOL_FOR_TARGET_value= > > > > ac_cv_env_DLLTOOL_set= > > > > ac_cv_env_DLLTOOL_value= > > > > ac_cv_env_GCC_FOR_TARGET_set= > > > > ac_cv_env_GCC_FOR_TARGET_value= > > > > ac_cv_env_GDC_FOR_TARGET_set= > > > > ac_cv_env_GDC_FOR_TARGET_value= > > > > ac_cv_env_GFORTRAN_FOR_TARGET_set= > > > > ac_cv_env_GFORTRAN_FOR_TARGET_value= > > > > ac_cv_env_GOC_FOR_TARGET_set= > > > > ac_cv_env_GOC_FOR_TARGET_value= > > > > ac_cv_env_LDFLAGS_set= > > > > ac_cv_env_LDFLAGS_value= > > > > ac_cv_env_LD_FOR_TARGET_set= > > > > ac_cv_env_LD_FOR_TARGET_value= > > > > ac_cv_env_LD_set= > > > > ac_cv_env_LD_value= > > > > ac_cv_env_LIBS_set= > > > > ac_cv_env_LIBS_value= > > > > ac_cv_env_LIPO_FOR_TARGET_set= > > > > ac_cv_env_LIPO_FOR_TARGET_value= > > > > ac_cv_env_LIPO_set= > > > > ac_cv_env_LIPO_value= > > > > ac_cv_env_NM_FOR_TARGET_set= > > > > ac_cv_env_NM_FOR_TARGET_value= > > > > ac_cv_env_NM_set= > > > > ac_cv_env_NM_value= > > > > ac_cv_env_OBJCOPY_FOR_TARGET_set= > > > > ac_cv_env_OBJCOPY_FOR_TARGET_value= > > > > ac_cv_env_OBJCOPY_set= > > > > ac_cv_env_OBJCOPY_value= > > > > ac_cv_env_OBJDUMP_FOR_TARGET_set= > > > > ac_cv_env_OBJDUMP_FOR_TARGET_value= > > > > ac_cv_env_OBJDUMP_set= > > > > ac_cv_env_OBJDUMP_value= > > > > ac_cv_env_OTOOL_FOR_TARGET_set= > > > > ac_cv_env_OTOOL_FOR_TARGET_value= > > > > ac_cv_env_OTOOL_set= > > > > ac_cv_env_OTOOL_value= > > > > ac_cv_env_RANLIB_FOR_TARGET_set= > > > > ac_cv_env_RANLIB_FOR_TARGET_value= > > > > ac_cv_env_RANLIB_set= > > > > ac_cv_env_RANLIB_value= > > > > ac_cv_env_READELF_FOR_TARGET_set= > > > > ac_cv_env_READELF_FOR_TARGET_value= > > > > ac_cv_env_READELF_set= > > > > ac_cv_env_READELF_value= > > > > ac_cv_env_STRIP_FOR_TARGET_set= > > > > ac_cv_env_STRIP_FOR_TARGET_value= > > > > ac_cv_env_STRIP_set= > > > > ac_cv_env_STRIP_value= > > > > ac_cv_env_WINDMC_FOR_TARGET_set= > > > > ac_cv_env_WINDMC_FOR_TARGET_value= > > > > ac_cv_env_WINDMC_set= > > > > ac_cv_env_WINDMC_value= > > > > ac_cv_env_WINDRES_FOR_TARGET_set= > > > > ac_cv_env_WINDRES_FOR_TARGET_value= > > > > ac_cv_env_WINDRES_set= > > > > ac_cv_env_WINDRES_value= > > > > ac_cv_env_build_alias_set=set > > > > ac_cv_env_build_alias_value=x86_64-cross-linux-gnu > > > > ac_cv_env_build_configargs_set= > > > > ac_cv_env_build_configargs_value= > > > > ac_cv_env_host_alias_set=set > > > > ac_cv_env_host_alias_value=x86_64-cross-linux-gnu > > > > ac_cv_env_host_configargs_set= > > > > ac_cv_env_host_configargs_value= > > > > ac_cv_env_target_alias_set=set > > > > ac_cv_env_target_alias_value=arm-linux-musleabihf > > > > ac_cv_env_target_configargs_set= > > > > ac_cv_env_target_configargs_value= > > > > ac_cv_host=x86_64-cross-linux-gnu > > > > ac_cv_objext=o > > > > ac_cv_path_AR_FOR_TARGET=/mnt/clfs/cross-tools/arm-linux-musleabihf/bin/ar > > > > ac_cv_path_AS_FOR_TARGET=/mnt/clfs/cross-tools/arm-linux-musleabihf/bin/as > > > > ac_cv_path_LD_FOR_TARGET=/mnt/clfs/cross-tools/arm-linux-musleabihf/bin/ld > > > > ac_cv_path_NM_FOR_TARGET=/mnt/clfs/cross-tools/arm-linux-musleabihf/bin/nm > > > > ac_cv_path_OBJCOPY_FOR_TARGET=/mnt/clfs/cross-tools/arm-linux-musleabihf/bin/objcopy > > > > ac_cv_path_OBJDUMP_FOR_TARGET=/mnt/clfs/cross-tools/arm-linux-musleabihf/bin/objdump > > > > ac_cv_path_RANLIB_FOR_TARGET=/mnt/clfs/cross-tools/arm-linux-musleabihf/bin/ranlib > > > > ac_cv_path_READELF_FOR_TARGET=/mnt/clfs/cross-tools/arm-linux-musleabihf/bin/readelf > > > > ac_cv_path_SED=/bin/sed > > > > ac_cv_path_STRIP_FOR_TARGET=/mnt/clfs/cross-tools/arm-linux-musleabihf/bin/strip > > > > ac_cv_path_install='/bin/install -c' > > > > ac_cv_prog_AR=ar > > > > ac_cv_prog_AS=as > > > > ac_cv_prog_AWK=gawk > > > > ac_cv_prog_BISON=bison > > > > ac_cv_prog_EXPECT=expect > > > > ac_cv_prog_FLEX=flex > > > > ac_cv_prog_LD=ld > > > > ac_cv_prog_LEX=flex > > > > ac_cv_prog_M4=m4 > > > > ac_cv_prog_MAKEINFO=makeinfo > > > > ac_cv_prog_NM=nm > > > > ac_cv_prog_OBJCOPY=objcopy > > > > ac_cv_prog_OBJDUMP=objdump > > > > ac_cv_prog_RANLIB=ranlib > > > > ac_cv_prog_READELF=readelf > > > > ac_cv_prog_STRIP=strip > > > > ac_cv_prog_YACC='bison -y' > > > > ac_cv_prog_ac_ct_CC=gcc > > > > ac_cv_prog_ac_ct_CXX=g++ > > > > ac_cv_prog_cc_c89= > > > > ac_cv_prog_cc_g=yes > > > > ac_cv_prog_cxx_g=yes > > > > ac_cv_target=arm-unknown-linux-musleabihf > > > > acx_cv_cc_gcc_supports_ada=no > > > > acx_cv_prog_LN=ln > > > > gcc_cv_isl=no > > > > gcc_cv_prog_cmp_skip='cmp --ignore-initial=16 $$f1 $$f2' > > > > gcc_cv_tool_dirs=/mnt/clfs/cross-tools/libexec/gcc/arm-linux-musleabihf/9.2.0:/mnt/clfs/cross-tools/libexec/gcc/arm-linux-musleabihf:/usr/lib/gcc/arm-linux-musleabihf/9.2.0:/usr/lib/gcc/arm-linux-musleabihf:/mnt/clfs/cross-tools/arm-linux-musleabihf/bin/arm-linux-musleabihf/9.2.0:/mnt/clfs/cross-tools/arm-linux-musleabihf/bin: > > > > gcc_cv_tool_prefix=/mnt/clfs/cross-tools > > > > lt_cv_objdir=.libs > > > > > > > > ## ----------------- ## > > > > ## Output variables. ## > > > > ## ----------------- ## > > > > > > > > AR='ar' > > > > AR_FOR_BUILD='$(AR)' > > > > AR_FOR_TARGET='/mnt/clfs/cross-tools/arm-linux-musleabihf/bin/ar' > > > > AS='as' > > > > AS_FOR_BUILD='$(AS)' > > > > AS_FOR_TARGET='/mnt/clfs/cross-tools/arm-linux-musleabihf/bin/as' > > > > AWK='gawk' > > > > BISON='bison' > > > > BUILD_CONFIG='' > > > > CC='gcc' > > > > CC_FOR_BUILD='$(CC)' > > > > CC_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/xgcc -B$$r/$(HOST_SUBDIR)/gcc/' > > > > CFLAGS='-g -O2' > > > > CFLAGS_FOR_BUILD='-g -O2' > > > > CFLAGS_FOR_TARGET='-g -O2' > > > > COMPILER_AS_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/as' > > > > COMPILER_LD_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/collect-ld' > > > > COMPILER_NM_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/nm' > > > > CONFIGURE_GDB_TK='' > > > > CPPFLAGS='' > > > > CXX='g++' > > > > CXXFLAGS='-g -O2' > > > > CXXFLAGS_FOR_BUILD='-g -O2' > > > > CXXFLAGS_FOR_TARGET='-g -O2' > > > > CXX_FOR_BUILD='$(CXX)' > > > > CXX_FOR_TARGET='arm-linux-musleabihf-c++' > > > > DEBUG_PREFIX_CFLAGS_FOR_TARGET='' > > > > DEFS='-DPACKAGE_NAME=\"\" -DPACKAGE_TARNAME=\"\" -DPACKAGE_VERSION=\"\" -DPACKAGE_STRING=\"\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE_URL=\"\" -DLT_OBJDIR=\".libs/\"' > > > > DLLTOOL='dlltool' > > > > DLLTOOL_FOR_BUILD='$(DLLTOOL)' > > > > DLLTOOL_FOR_TARGET='arm-linux-musleabihf-dlltool' > > > > ECHO_C='' > > > > ECHO_N='-n' > > > > ECHO_T='' > > > > EXEEXT='' > > > > EXPECT='expect' > > > > FLAGS_FOR_TARGET=' -B$(build_tooldir)/bin/ -B$(build_tooldir)/lib/ -isystem $(build_tooldir)/include -isystem $(build_tooldir)/sys-include' > > > > FLEX='flex' > > > > GCC_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/xgcc -B$$r/$(HOST_SUBDIR)/gcc/' > > > > GCC_SHLIB_SUBDIR='' > > > > GDB_TK='' > > > > GDC_FOR_BUILD='$(GDC)' > > > > GDC_FOR_TARGET='arm-linux-musleabihf-gdc' > > > > GFORTRAN_FOR_BUILD='$(GFORTRAN)' > > > > GFORTRAN_FOR_TARGET='arm-linux-musleabihf-gfortran' > > > > GNATBIND='no' > > > > GNATMAKE='no' > > > > GOC_FOR_BUILD='$(GOC)' > > > > GOC_FOR_TARGET='arm-linux-musleabihf-gccgo' > > > > INSTALL_DATA='${INSTALL} -m 644' > > > > INSTALL_GDB_TK='' > > > > INSTALL_PROGRAM='${INSTALL}' > > > > INSTALL_SCRIPT='${INSTALL}' > > > > LD='ld' > > > > LDFLAGS='' > > > > LDFLAGS_FOR_BUILD='' > > > > LDFLAGS_FOR_TARGET='' > > > > LD_FOR_BUILD='$(LD)' > > > > LD_FOR_TARGET='/mnt/clfs/cross-tools/arm-linux-musleabihf/bin/ld' > > > > LEX='flex' > > > > LIBOBJS='' > > > > LIBS='' > > > > LIPO='lipo' > > > > LIPO_FOR_TARGET='arm-linux-musleabihf-lipo' > > > > LN='ln' > > > > LN_S='ln -s' > > > > LTLIBOBJS='' > > > > M4='m4' > > > > MAINT='#' > > > > MAINTAINER_MODE_FALSE='' > > > > MAINTAINER_MODE_TRUE='#' > > > > MAKEINFO='makeinfo' > > > > NM='nm' > > > > NM_FOR_BUILD='$(NM)' > > > > NM_FOR_TARGET='/mnt/clfs/cross-tools/arm-linux-musleabihf/bin/nm' > > > > OBJCOPY='objcopy' > > > > OBJCOPY_FOR_TARGET='/mnt/clfs/cross-tools/arm-linux-musleabihf/bin/objcopy' > > > > OBJDUMP='objdump' > > > > OBJDUMP_FOR_TARGET='/mnt/clfs/cross-tools/arm-linux-musleabihf/bin/objdump' > > > > OBJEXT='o' > > > > OTOOL='otool' > > > > OTOOL_FOR_TARGET='arm-linux-musleabihf-otool' > > > > PACKAGE_BUGREPORT='' > > > > PACKAGE_NAME='' > > > > PACKAGE_STRING='' > > > > PACKAGE_TARNAME='' > > > > PACKAGE_URL='' > > > > PACKAGE_VERSION='' > > > > PATH_SEPARATOR=':' > > > > RANLIB='ranlib' > > > > RANLIB_FOR_BUILD='$(RANLIB)' > > > > RANLIB_FOR_TARGET='/mnt/clfs/cross-tools/arm-linux-musleabihf/bin/ranlib' > > > > RAW_CXX_FOR_TARGET='arm-linux-musleabihf-c++' > > > > READELF='readelf' > > > > READELF_FOR_TARGET='/mnt/clfs/cross-tools/arm-linux-musleabihf/bin/readelf' > > > > RPATH_ENVVAR='LD_LIBRARY_PATH' > > > > RUNTEST='runtest' > > > > SED='/bin/sed' > > > > SHELL='/bin/bash' > > > > STRIP='strip' > > > > STRIP_FOR_TARGET='/mnt/clfs/cross-tools/arm-linux-musleabihf/bin/strip' > > > > SYSROOT_CFLAGS_FOR_TARGET='' > > > > TOPLEVEL_CONFIGURE_ARGUMENTS='../gcc-9.2.0/configure --prefix=/mnt/clfs/cross-tools --build=x86_64-cross-linux-gnu --host=x86_64-cross-linux-gnu --target=arm-linux-musleabihf --with-sysroot=/mnt/clfs/cross-tools/arm-linux-musleabihf --disable-nls --disable-shared --without-headers --with-newlib --disable-decimal-float --disable-libgomp --disable-libmudflap --disable-libssp --disable-libatomic --disable-libquadmath --disable-threads --enable-languages=c --enable-multilib --with-mpfr-include=/mnt/clfs/sources/gcc-build/../gcc-9.2.0/mpfr/src --with-mpfr-lib=/mnt/clfs/sources/gcc-build/mpfr/src/.libs --with-multilib-list=rmprofile' > > > > WINDMC='windmc' > > > > WINDMC_FOR_BUILD='$(WINDMC)' > > > > WINDMC_FOR_TARGET='arm-linux-musleabihf-windmc' > > > > WINDRES='windres' > > > > WINDRES_FOR_BUILD='$(WINDRES)' > > > > WINDRES_FOR_TARGET='arm-linux-musleabihf-windres' > > > > YACC='bison -y' > > > > ac_ct_CC='gcc' > > > > ac_ct_CXX='g++' > > > > bindir='${exec_prefix}/bin' > > > > build='x86_64-cross-linux-gnu' > > > > build_alias='x86_64-cross-linux-gnu' > > > > build_configargs=' --cache-file=./config.cache '\''--prefix=/mnt/clfs/cross-tools'\'' '\''--with-sysroot=/mnt/clfs/cross-tools/arm-linux-musleabihf'\'' '\''--disable-nls'\'' '\''--disable-shared'\'' '\''--without-headers'\'' '\''--with-newlib'\'' '\''--disable-decimal-float'\'' '\''--disable-libgomp'\'' '\''--disable-libmudflap'\'' '\''--disable-libssp'\'' '\''--disable-libatomic'\'' '\''--disable-libquadmath'\'' '\''--disable-threads'\'' '\''--enable-multilib'\'' '\''--with-mpfr-include=/mnt/clfs/sources/gcc-build/../gcc-9.2.0/mpfr/src'\'' '\''--with-mpfr-lib=/mnt/clfs/sources/gcc-build/mpfr/src/.libs'\'' '\''--with-multilib-list=rmprofile'\'' '\''--enable-languages=c,lto'\'' --program-transform-name='\''s&^&arm-linux-musleabihf-&'\'' --disable-option-checking' > > > > build_configdirs=' libiberty libcpp fixincludes' > > > > build_cpu='x86_64' > > > > build_libsubdir='build-x86_64-cross-linux-gnu' > > > > build_noncanonical='x86_64-cross-linux-gnu' > > > > build_os='linux-gnu' > > > > build_subdir='build-x86_64-cross-linux-gnu' > > > > build_tooldir='${exec_prefix}/arm-linux-musleabihf' > > > > build_vendor='cross' > > > > compare_exclusions='gcc/cc*-checksum$(objext) | gcc/ada/*tools/*' > > > > configdirs=' intl libiberty zlib libbacktrace libcpp libdecnumber gmp mpfr mpc fixincludes gcc libcc1 lto-plugin' > > > > datadir='${datarootdir}' > > > > datarootdir='${prefix}/share' > > > > do_compare='cmp --ignore-initial=16 $$f1 $$f2' > > > > docdir='${datarootdir}/doc/${PACKAGE}' > > > > dvidir='${docdir}' > > > > exec_prefix='${prefix}' > > > > extra_host_libiberty_configure_flags='--enable-shared' > > > > extra_host_zlib_configure_flags='' > > > > extra_isl_gmp_configure_flags='--with-gmp-builddir=$$r/$(HOST_SUBDIR)/gmp' > > > > extra_liboffloadmic_configure_flags='' > > > > extra_linker_plugin_configure_flags='' > > > > extra_linker_plugin_flags='' > > > > extra_mpc_gmp_configure_flags='--with-gmp-include=$$r/$(HOST_SUBDIR)/gmp --with-gmp-lib=$$r/$(HOST_SUBDIR)/gmp/.libs' > > > > extra_mpc_mpfr_configure_flags='' > > > > extra_mpfr_configure_flags='--with-gmp-include=$$r/$(HOST_SUBDIR)/gmp --with-gmp-lib=$$r/$(HOST_SUBDIR)/gmp/.libs' > > > > get_gcc_base_ver='cat' > > > > gmpinc='-I$$r/$(HOST_SUBDIR)/gmp -I$$s/gmp -I/mnt/clfs/sources/gcc-build/../gcc-9.2.0/mpfr/src -I$$s/mpc/src ' > > > > gmplibs='-L$$r/$(HOST_SUBDIR)/gmp/.libs -L/mnt/clfs/sources/gcc-build/mpfr/src/.libs -L$$r/$(HOST_SUBDIR)/mpc/src/.libs -lmpc -lmpfr -lgmp' > > > > host='x86_64-cross-linux-gnu' > > > > host_alias='x86_64-cross-linux-gnu' > > > > host_configargs=' --cache-file=./config.cache '\''--prefix=/mnt/clfs/cross-tools'\'' '\''--with-sysroot=/mnt/clfs/cross-tools/arm-linux-musleabihf'\'' '\''--disable-nls'\'' '\''--disable-shared'\'' '\''--without-headers'\'' '\''--with-newlib'\'' '\''--disable-decimal-float'\'' '\''--disable-libgomp'\'' '\''--disable-libmudflap'\'' '\''--disable-libssp'\'' '\''--disable-libatomic'\'' '\''--disable-libquadmath'\'' '\''--disable-threads'\'' '\''--enable-multilib'\'' '\''--with-mpfr-include=/mnt/clfs/sources/gcc-build/../gcc-9.2.0/mpfr/src'\'' '\''--with-mpfr-lib=/mnt/clfs/sources/gcc-build/mpfr/src/.libs'\'' '\''--with-multilib-list=rmprofile'\'' '\''--enable-languages=c,lto'\'' --program-transform-name='\''s&^&arm-linux-musleabihf-&'\'' --disable-option-checking' > > > > host_cpu='x86_64' > > > > host_noncanonical='x86_64-cross-linux-gnu' > > > > host_os='linux-gnu' > > > > host_shared='no' > > > > host_subdir='.' > > > > host_vendor='cross' > > > > htmldir='${docdir}' > > > > includedir='${prefix}/include' > > > > infodir='${datarootdir}/info' > > > > islinc='' > > > > isllibs='' > > > > libdir='${exec_prefix}/lib' > > > > libexecdir='${exec_prefix}/libexec' > > > > localedir='${datarootdir}/locale' > > > > localstatedir='${prefix}/var' > > > > mandir='${datarootdir}/man' > > > > oldincludedir='/usr/include' > > > > pdfdir='${docdir}' > > > > poststage1_ldflags='-static-libstdc++ -static-libgcc' > > > > poststage1_libs='' > > > > prefix='/mnt/clfs/cross-tools' > > > > program_transform_name='s&^&arm-linux-musleabihf-&' > > > > psdir='${docdir}' > > > > sbindir='${exec_prefix}/sbin' > > > > sharedstatedir='${prefix}/com' > > > > stage1_cflags='-g' > > > > stage1_checking='--enable-checking=yes,types' > > > > stage1_languages='c,lto' > > > > stage1_ldflags='-static-libstdc++ -static-libgcc' > > > > stage1_libs='' > > > > stage2_werror_flag='' > > > > sysconfdir='${prefix}/etc' > > > > target='arm-unknown-linux-musleabihf' > > > > target_alias='arm-linux-musleabihf' > > > > target_configargs='--cache-file=./config.cache --with-cross-host=x86_64-cross-linux-gnu '\''--prefix=/mnt/clfs/cross-tools'\'' '\''--with-sysroot=/mnt/clfs/cross-tools/arm-linux-musleabihf'\'' '\''--disable-nls'\'' '\''--disable-shared'\'' '\''--without-headers'\'' '\''--with-newlib'\'' '\''--disable-decimal-float'\'' '\''--disable-libgomp'\'' '\''--disable-libmudflap'\'' '\''--disable-libssp'\'' '\''--disable-libatomic'\'' '\''--disable-libquadmath'\'' '\''--disable-threads'\'' '\''--enable-multilib'\'' '\''--with-multilib-list=rmprofile'\'' '\''--enable-languages=c,lto'\'' --program-transform-name='\''s&^&arm-linux-musleabihf-&'\'' --disable-option-checking' > > > > target_configdirs=' libgcc' > > > > target_cpu='arm' > > > > target_noncanonical='arm-linux-musleabihf' > > > > target_os='linux-musleabihf' > > > > target_subdir='arm-linux-musleabihf' > > > > target_vendor='unknown' > > > > tooldir='${exec_prefix}/arm-linux-musleabihf' > > > > > > > > ## ------------------- ## > > > > ## File substitutions. ## > > > > ## ------------------- ## > > > > > > > > alphaieee_frag='/dev/null' > > > > host_makefile_frag='/dev/null' > > > > ospace_frag='/dev/null' > > > > serialization_dependencies='serdep.tmp' > > > > target_makefile_frag='../gcc-9.2.0/config/mt-gnu' > > > > > > > > ## ----------- ## > > > > ## confdefs.h. ## > > > > ## ----------- ## > > > > > > > > /* confdefs.h */ > > > > #define PACKAGE_NAME "" > > > > #define PACKAGE_TARNAME "" > > > > #define PACKAGE_VERSION "" > > > > #define PACKAGE_STRING "" > > > > #define PACKAGE_BUGREPORT "" > > > > #define PACKAGE_URL "" > > > > #define LT_OBJDIR ".libs/" > > > > > > > > configure: exit 0 > > > > > > > > What could be the problem? > > > > --------------------------------------------------------------- > > > > On Mon, Nov 11, 2019 at 01:42:43PM +0000, Richard Earnshaw (lists) wrote: > > > > > On 11/11/2019 13:33, sayed israr wrote: > > > > > > ---------- Forwarded message --------- > > > > > > From: Israr Sayed <sd.israr@gmail.com> > > > > > > Date: Mon, Nov 11, 2019 at 5:38 PM > > > > > > Subject: Re: Is it possible to build Single GCC Executable for armv5, > > > > > > armv6, armv7-{cortex-xx-{A,R,M}},armv8 etc.? > > > > > > To: Jonathan Wakely <jwakely.gcc@gmail.com> > > > > > > > > > > > > > > > > > > I am building GCC from sources.Where i can configure it with 2 ways: > > > > > > (1) --with-arch --with-cpu --with-fpu --with-float options . > > > > > > (2) --with-multilib-list= . > > > > > > In --with-multilib-list, we can configure for various combinations of > > > > > > armv*-*-*. > > > > > > For example, I want to build gcc for with arch = armv7, armv7-m, armv7e-m, > > > > > > with float = hard, softfp, soft. > > > > > > with fpu = fpv, fpv4, fpv4-d16 etc.. > > > > > > whereas if in configure i mention --with-arch --with-fpu --with-float.That > > > > > > will build GCC for those options only. > > > > > > I have a prebuilt arm GCC binary for STM32F controllers, which is built for > > > > > > whole range of armv7-M, armv7e-m along with FPUs. > > > > > > there configure options show --with-multilib-list=rmprofile. > > > > > > rmprofile is the multilib option for configure.Which is exactly what > > > > > > gcc/config/arm/t-rmprofile file is about. > > > > > > I hope i can explain my question better. > > > > > > > > > > You can configure the compiler with --with-multlib-list=xxx > > > > > > > > > > where xxx is any of "aprofile", "rmprofile" and "aprofile,rmprofile" > > > > > > > > > > If you do this, DO NOT specify any of --with-fpu, --with-cpu, --with-tune or > > > > > --with-arch. > > > > > > > > > > Be warned, the full set of multilibs is LARGE. It requires a fast machine > > > > > and/or a lot of time to build them all. > > > > > > > > > > You can, of course, edit any of the files - the GPL gives you that right, > > > > > but if you do so, you're most likely on your own. The multilib > > > > > configurations are complex and rely heavily on GNU Makefile trickery to > > > > > express all the required combinations. > > > > > > > > > > R. > > > > > > > > > > > ------------------------------------------------------ > > > > > > > > > > > > On Mon, Nov 11, 2019 at 11:40:39AM +0000, Jonathan Wakely wrote: > > > > > > > On Sun, 10 Nov 2019 at 11:36, Israr Sayed <sd.israr@gmail.com> wrote: > > > > > > > > > > > > > > > > Digging into the sources of GCC I noticed in files gcc/config/arm/t-*, > > > > > > There are multiple arm target options. > > > > > > > > > > > > > > > > Reading [GCC internal Manual], These are called Target Makefile > > > > > > Fragments, which will be included in main Makefile, like MULTILIB_OPTIONS, > > > > > > MULTILIB_DIRNAMES, MULTILIB_MATCHES, MULTILIB_REQUIRED, MULTILIB_REUSE, > > > > > > MULTILIB_EXTRA_OPTS, MULTILIB_OSDIRNAMES, MULTIARCH_DIRNAME. > > > > > > > > > > > > > > > > What I am not able to understand that how to bring it in at the time of > > > > > > configure.Which option to choose? > > > > > > > > > > > > > > > > More over is it possible to edit those t-* files as per the requirement > > > > > > and how? > > > > > > > > Please Help. > > > > > > > > > > > > > > I don't understand your question. Your email's subject talks about a > > > > > > > single GCC executable for multiple ARM variants, which is supported > > > > > > > automatically. When you configure GCC for an ARM target you can select > > > > > > > the specific processor type using the -march and/or -mcpu options. See > > > > > > > the documentation of command-line options in the GCC manual. > > > > > > > > > > > > > > You don't need to do anything special to use the target makefile > > > > > > > fragments, they're used automatically, as needed. > > > > > > > > > ^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2019-11-18 16:33 UTC | newest] Thread overview: 9+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2019-11-10 11:36 Is it possible to build Single GCC Executable for armv5, armv6, armv7-{cortex-xx-{A,R,M}},armv8 etc.? Israr Sayed 2019-11-11 11:40 ` Jonathan Wakely [not found] ` <20191111120813.GA9619@hib> 2019-11-11 13:33 ` Fwd: " sayed israr 2019-11-11 13:42 ` Richard Earnshaw (lists) 2019-11-11 17:50 ` Israr Sayed 2019-11-12 10:01 ` Richard Earnshaw (lists) 2019-11-16 23:07 ` Israr Sayed 2019-11-18 15:53 ` Richard Earnshaw (lists) 2019-11-18 16:33 ` Israr Sayed
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).