* egcs-19990830 HP-UX Problem
@ 1999-09-03 15:35 Skip Sopscak
1999-09-04 8:21 ` Jeffrey A Law
` (4 more replies)
0 siblings, 5 replies; 15+ messages in thread
From: Skip Sopscak @ 1999-09-03 15:35 UTC (permalink / raw)
To: help-gcc
Since recent gcc releases don't work reliably under HP-UX 11, per
Mr. Law's advice I acquired what appears to be the latest
development snapshot (I take it these retain the egcs name for
the time being?).
Configured thusly
../egcs-19990830/configure --prefix=/opt/gnu/egcs-snap \
--enable-shared --with-gnu-as --with-as=/opt/gnu/bin/as \
--enable-threads
a fair distance into a "make bootstrap", I get the following:
[...]
_fixunstfdi
_floatditf
__gcc_bcmp
_varargs
__dummy
_eprintf
_bb
/var/tmp/ccmMYzae.s: Assembler messages:
/var/tmp/ccmMYzae.s:2066: Error: Unknown pseudo-op: `.dword'
/var/tmp/ccmMYzae.s:2271: Error: Unknown pseudo-op: `.dword'
make[1]: *** [libgcc2.a] Error 1
make[1]: Leaving directory
`/projects/opt_build/egcs-19990830-build/gcc'
make: *** [bootstrap] Error 2
*** Error exit code 2
I'd be most grateful for any ideas anyone might have...
Thanks!
--
Skip Sopscak, Omaha, NE
alt email: dsopscak@home.com
http://mote.dhs.org/~dsopscak
Sent via PINE: Power Internet News & Email
^ permalink raw reply [flat|nested] 15+ messages in thread* Re: egcs-19990830 HP-UX Problem
1999-09-03 15:35 egcs-19990830 HP-UX Problem Skip Sopscak
@ 1999-09-04 8:21 ` Jeffrey A Law
1999-09-30 23:56 ` Jeffrey A Law
1999-10-01 0:00 ` Jeffrey A Law
1999-09-06 20:22 ` Tim Prince
` (3 subsequent siblings)
4 siblings, 2 replies; 15+ messages in thread
From: Jeffrey A Law @ 1999-09-04 8:21 UTC (permalink / raw)
To: Skip Sopscak; +Cc: help-gcc
In message < Pine.LNX.4.10.9909031718500.7103-100000@george.mmi >you write:
> Since recent gcc releases don't work reliably under HP-UX 11, per
> Mr. Law's advice I acquired what appears to be the latest
> development snapshot (I take it these retain the egcs name for
> the time being?).
[ ... ]
Nuts. Thanks. I had wondered some versions of the assembler were
going to balk about using .dword. I guess that answers the question.
Strictly speaking it's only needed for the PA64 work, but I thought it
might be useful to have available for other purposes. Sigh.
I'll fix it momentarily.
jeff
^ permalink raw reply [flat|nested] 15+ messages in thread* Re: egcs-19990830 HP-UX Problem
1999-09-04 8:21 ` Jeffrey A Law
@ 1999-09-30 23:56 ` Jeffrey A Law
1999-10-01 0:00 ` Jeffrey A Law
1 sibling, 0 replies; 15+ messages in thread
From: Jeffrey A Law @ 1999-09-30 23:56 UTC (permalink / raw)
To: Skip Sopscak; +Cc: help-gcc
In message < Pine.LNX.4.10.9909031718500.7103-100000@george.mmi >you write:
> Since recent gcc releases don't work reliably under HP-UX 11, per
> Mr. Law's advice I acquired what appears to be the latest
> development snapshot (I take it these retain the egcs name for
> the time being?).
[ ... ]
Nuts. Thanks. I had wondered some versions of the assembler were
going to balk about using .dword. I guess that answers the question.
Strictly speaking it's only needed for the PA64 work, but I thought it
might be useful to have available for other purposes. Sigh.
I'll fix it momentarily.
jeff
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: egcs-19990830 HP-UX Problem
1999-09-04 8:21 ` Jeffrey A Law
1999-09-30 23:56 ` Jeffrey A Law
@ 1999-10-01 0:00 ` Jeffrey A Law
1 sibling, 0 replies; 15+ messages in thread
From: Jeffrey A Law @ 1999-10-01 0:00 UTC (permalink / raw)
To: Skip Sopscak; +Cc: help-gcc
In message < Pine.LNX.4.10.9909031718500.7103-100000@george.mmi >you write:
> Since recent gcc releases don't work reliably under HP-UX 11, per
> Mr. Law's advice I acquired what appears to be the latest
> development snapshot (I take it these retain the egcs name for
> the time being?).
[ ... ]
Nuts. Thanks. I had wondered some versions of the assembler were
going to balk about using .dword. I guess that answers the question.
Strictly speaking it's only needed for the PA64 work, but I thought it
might be useful to have available for other purposes. Sigh.
I'll fix it momentarily.
jeff
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: egcs-19990830 HP-UX Problem
1999-09-03 15:35 egcs-19990830 HP-UX Problem Skip Sopscak
1999-09-04 8:21 ` Jeffrey A Law
@ 1999-09-06 20:22 ` Tim Prince
1999-09-07 0:20 ` Jeffrey A Law
` (2 more replies)
1999-09-06 23:41 ` Jeffrey A Law
` (2 subsequent siblings)
4 siblings, 3 replies; 15+ messages in thread
From: Tim Prince @ 1999-09-06 20:22 UTC (permalink / raw)
To: help-gcc
>/var/tmp/ccmMYzae.s:2066: Error: Unknown pseudo-op: `.dword'
>
The hppa port no longer works with binutils-2.9.1. The installation
instructions were out of date last I looked. I have built successfully with
recent binutils snapshots from ftp://egcs.cygnus.com/pub/binutils .
Tim
tprince@computer.org
Tim Prince
tprince@computer.org
^ permalink raw reply [flat|nested] 15+ messages in thread* Re: egcs-19990830 HP-UX Problem
1999-09-06 20:22 ` Tim Prince
@ 1999-09-07 0:20 ` Jeffrey A Law
1999-09-30 23:56 ` Jeffrey A Law
1999-10-01 0:00 ` Jeffrey A Law
1999-09-30 23:56 ` Tim Prince
1999-10-01 0:00 ` Tim Prince
2 siblings, 2 replies; 15+ messages in thread
From: Jeffrey A Law @ 1999-09-07 0:20 UTC (permalink / raw)
To: Tim Prince; +Cc: help-gcc
In message < 19990906232154.17170.00005426@ng-fe1.aol.com >you write:
> >/var/tmp/ccmMYzae.s:2066: Error: Unknown pseudo-op: `.dword'
> >
>
> The hppa port no longer works with binutils-2.9.1.
Precisely why? Other than the .dword buglet that slipped through, what
causes problems. Please be specific, testcases are always preferred.
gcc should work just fine with binutils-2.9.1. If it does not, I would
consider that a bug.
> The installation instructions were out of date last I looked.
?!? They look correct to me.
jeff
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: egcs-19990830 HP-UX Problem
1999-09-07 0:20 ` Jeffrey A Law
@ 1999-09-30 23:56 ` Jeffrey A Law
1999-10-01 0:00 ` Jeffrey A Law
1 sibling, 0 replies; 15+ messages in thread
From: Jeffrey A Law @ 1999-09-30 23:56 UTC (permalink / raw)
To: Tim Prince; +Cc: help-gcc
In message < 19990906232154.17170.00005426@ng-fe1.aol.com >you write:
> >/var/tmp/ccmMYzae.s:2066: Error: Unknown pseudo-op: `.dword'
> >
>
> The hppa port no longer works with binutils-2.9.1.
Precisely why? Other than the .dword buglet that slipped through, what
causes problems. Please be specific, testcases are always preferred.
gcc should work just fine with binutils-2.9.1. If it does not, I would
consider that a bug.
> The installation instructions were out of date last I looked.
?!? They look correct to me.
jeff
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: egcs-19990830 HP-UX Problem
1999-09-07 0:20 ` Jeffrey A Law
1999-09-30 23:56 ` Jeffrey A Law
@ 1999-10-01 0:00 ` Jeffrey A Law
1 sibling, 0 replies; 15+ messages in thread
From: Jeffrey A Law @ 1999-10-01 0:00 UTC (permalink / raw)
To: Tim Prince; +Cc: help-gcc
In message < 19990906232154.17170.00005426@ng-fe1.aol.com >you write:
> >/var/tmp/ccmMYzae.s:2066: Error: Unknown pseudo-op: `.dword'
> >
>
> The hppa port no longer works with binutils-2.9.1.
Precisely why? Other than the .dword buglet that slipped through, what
causes problems. Please be specific, testcases are always preferred.
gcc should work just fine with binutils-2.9.1. If it does not, I would
consider that a bug.
> The installation instructions were out of date last I looked.
?!? They look correct to me.
jeff
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: egcs-19990830 HP-UX Problem
1999-09-06 20:22 ` Tim Prince
1999-09-07 0:20 ` Jeffrey A Law
@ 1999-09-30 23:56 ` Tim Prince
1999-10-01 0:00 ` Tim Prince
2 siblings, 0 replies; 15+ messages in thread
From: Tim Prince @ 1999-09-30 23:56 UTC (permalink / raw)
To: help-gcc
>/var/tmp/ccmMYzae.s:2066: Error: Unknown pseudo-op: `.dword'
>
The hppa port no longer works with binutils-2.9.1. The installation
instructions were out of date last I looked. I have built successfully with
recent binutils snapshots from ftp://egcs.cygnus.com/pub/binutils .
Tim
tprince@computer.org
Tim Prince
tprince@computer.org
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: egcs-19990830 HP-UX Problem
1999-09-06 20:22 ` Tim Prince
1999-09-07 0:20 ` Jeffrey A Law
1999-09-30 23:56 ` Tim Prince
@ 1999-10-01 0:00 ` Tim Prince
2 siblings, 0 replies; 15+ messages in thread
From: Tim Prince @ 1999-10-01 0:00 UTC (permalink / raw)
To: help-gcc
>/var/tmp/ccmMYzae.s:2066: Error: Unknown pseudo-op: `.dword'
>
The hppa port no longer works with binutils-2.9.1. The installation
instructions were out of date last I looked. I have built successfully with
recent binutils snapshots from ftp://egcs.cygnus.com/pub/binutils .
Tim
tprince@computer.org
Tim Prince
tprince@computer.org
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: egcs-19990830 HP-UX Problem
1999-09-03 15:35 egcs-19990830 HP-UX Problem Skip Sopscak
1999-09-04 8:21 ` Jeffrey A Law
1999-09-06 20:22 ` Tim Prince
@ 1999-09-06 23:41 ` Jeffrey A Law
1999-09-30 23:56 ` Jeffrey A Law
1999-10-01 0:00 ` Jeffrey A Law
1999-09-30 23:56 ` Skip Sopscak
1999-10-01 0:00 ` Skip Sopscak
4 siblings, 2 replies; 15+ messages in thread
From: Jeffrey A Law @ 1999-09-06 23:41 UTC (permalink / raw)
To: Skip Sopscak; +Cc: help-gcc
In message < Pine.LNX.4.10.9909031718500.7103-100000@george.mmi >you write:
> Since recent gcc releases don't work reliably under HP-UX 11, per
> Mr. Law's advice I acquired what appears to be the latest
> development snapshot (I take it these retain the egcs name for
> the time being?).
>
> Configured thusly
>
> ../egcs-19990830/configure --prefix=/opt/gnu/egcs-snap \
> --enable-shared --with-gnu-as --with-as=/opt/gnu/bin/as \
> --enable-threads
>
> a fair distance into a "make bootstrap", I get the following:
>
> [...]
> _fixunstfdi
> _floatditf
> __gcc_bcmp
> _varargs
> __dummy
> _eprintf
> _bb
> /var/tmp/ccmMYzae.s: Assembler messages:
> /var/tmp/ccmMYzae.s:2066: Error: Unknown pseudo-op: `.dword'
> /var/tmp/ccmMYzae.s:2271: Error: Unknown pseudo-op: `.dword'
> make[1]: *** [libgcc2.a] Error 1
> make[1]: Leaving directory
> `/projects/opt_build/egcs-19990830-build/gcc'
> make: *** [bootstrap] Error 2
> *** Error exit code 2
Thanks. I've just checked in a fix for this problem.
jeff
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: egcs-19990830 HP-UX Problem
1999-09-06 23:41 ` Jeffrey A Law
@ 1999-09-30 23:56 ` Jeffrey A Law
1999-10-01 0:00 ` Jeffrey A Law
1 sibling, 0 replies; 15+ messages in thread
From: Jeffrey A Law @ 1999-09-30 23:56 UTC (permalink / raw)
To: Skip Sopscak; +Cc: help-gcc
In message < Pine.LNX.4.10.9909031718500.7103-100000@george.mmi >you write:
> Since recent gcc releases don't work reliably under HP-UX 11, per
> Mr. Law's advice I acquired what appears to be the latest
> development snapshot (I take it these retain the egcs name for
> the time being?).
>
> Configured thusly
>
> ../egcs-19990830/configure --prefix=/opt/gnu/egcs-snap \
> --enable-shared --with-gnu-as --with-as=/opt/gnu/bin/as \
> --enable-threads
>
> a fair distance into a "make bootstrap", I get the following:
>
> [...]
> _fixunstfdi
> _floatditf
> __gcc_bcmp
> _varargs
> __dummy
> _eprintf
> _bb
> /var/tmp/ccmMYzae.s: Assembler messages:
> /var/tmp/ccmMYzae.s:2066: Error: Unknown pseudo-op: `.dword'
> /var/tmp/ccmMYzae.s:2271: Error: Unknown pseudo-op: `.dword'
> make[1]: *** [libgcc2.a] Error 1
> make[1]: Leaving directory
> `/projects/opt_build/egcs-19990830-build/gcc'
> make: *** [bootstrap] Error 2
> *** Error exit code 2
Thanks. I've just checked in a fix for this problem.
jeff
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: egcs-19990830 HP-UX Problem
1999-09-06 23:41 ` Jeffrey A Law
1999-09-30 23:56 ` Jeffrey A Law
@ 1999-10-01 0:00 ` Jeffrey A Law
1 sibling, 0 replies; 15+ messages in thread
From: Jeffrey A Law @ 1999-10-01 0:00 UTC (permalink / raw)
To: Skip Sopscak; +Cc: help-gcc
In message < Pine.LNX.4.10.9909031718500.7103-100000@george.mmi >you write:
> Since recent gcc releases don't work reliably under HP-UX 11, per
> Mr. Law's advice I acquired what appears to be the latest
> development snapshot (I take it these retain the egcs name for
> the time being?).
>
> Configured thusly
>
> ../egcs-19990830/configure --prefix=/opt/gnu/egcs-snap \
> --enable-shared --with-gnu-as --with-as=/opt/gnu/bin/as \
> --enable-threads
>
> a fair distance into a "make bootstrap", I get the following:
>
> [...]
> _fixunstfdi
> _floatditf
> __gcc_bcmp
> _varargs
> __dummy
> _eprintf
> _bb
> /var/tmp/ccmMYzae.s: Assembler messages:
> /var/tmp/ccmMYzae.s:2066: Error: Unknown pseudo-op: `.dword'
> /var/tmp/ccmMYzae.s:2271: Error: Unknown pseudo-op: `.dword'
> make[1]: *** [libgcc2.a] Error 1
> make[1]: Leaving directory
> `/projects/opt_build/egcs-19990830-build/gcc'
> make: *** [bootstrap] Error 2
> *** Error exit code 2
Thanks. I've just checked in a fix for this problem.
jeff
^ permalink raw reply [flat|nested] 15+ messages in thread
* egcs-19990830 HP-UX Problem
1999-09-03 15:35 egcs-19990830 HP-UX Problem Skip Sopscak
` (2 preceding siblings ...)
1999-09-06 23:41 ` Jeffrey A Law
@ 1999-09-30 23:56 ` Skip Sopscak
1999-10-01 0:00 ` Skip Sopscak
4 siblings, 0 replies; 15+ messages in thread
From: Skip Sopscak @ 1999-09-30 23:56 UTC (permalink / raw)
To: help-gcc
Since recent gcc releases don't work reliably under HP-UX 11, per
Mr. Law's advice I acquired what appears to be the latest
development snapshot (I take it these retain the egcs name for
the time being?).
Configured thusly
../egcs-19990830/configure --prefix=/opt/gnu/egcs-snap \
--enable-shared --with-gnu-as --with-as=/opt/gnu/bin/as \
--enable-threads
a fair distance into a "make bootstrap", I get the following:
[...]
_fixunstfdi
_floatditf
__gcc_bcmp
_varargs
__dummy
_eprintf
_bb
/var/tmp/ccmMYzae.s: Assembler messages:
/var/tmp/ccmMYzae.s:2066: Error: Unknown pseudo-op: `.dword'
/var/tmp/ccmMYzae.s:2271: Error: Unknown pseudo-op: `.dword'
make[1]: *** [libgcc2.a] Error 1
make[1]: Leaving directory
`/projects/opt_build/egcs-19990830-build/gcc'
make: *** [bootstrap] Error 2
*** Error exit code 2
I'd be most grateful for any ideas anyone might have...
Thanks!
--
Skip Sopscak, Omaha, NE
alt email: dsopscak@home.com
http://mote.dhs.org/~dsopscak
Sent via PINE: Power Internet News & Email
^ permalink raw reply [flat|nested] 15+ messages in thread* egcs-19990830 HP-UX Problem
1999-09-03 15:35 egcs-19990830 HP-UX Problem Skip Sopscak
` (3 preceding siblings ...)
1999-09-30 23:56 ` Skip Sopscak
@ 1999-10-01 0:00 ` Skip Sopscak
4 siblings, 0 replies; 15+ messages in thread
From: Skip Sopscak @ 1999-10-01 0:00 UTC (permalink / raw)
To: help-gcc
Since recent gcc releases don't work reliably under HP-UX 11, per
Mr. Law's advice I acquired what appears to be the latest
development snapshot (I take it these retain the egcs name for
the time being?).
Configured thusly
../egcs-19990830/configure --prefix=/opt/gnu/egcs-snap \
--enable-shared --with-gnu-as --with-as=/opt/gnu/bin/as \
--enable-threads
a fair distance into a "make bootstrap", I get the following:
[...]
_fixunstfdi
_floatditf
__gcc_bcmp
_varargs
__dummy
_eprintf
_bb
/var/tmp/ccmMYzae.s: Assembler messages:
/var/tmp/ccmMYzae.s:2066: Error: Unknown pseudo-op: `.dword'
/var/tmp/ccmMYzae.s:2271: Error: Unknown pseudo-op: `.dword'
make[1]: *** [libgcc2.a] Error 1
make[1]: Leaving directory
`/projects/opt_build/egcs-19990830-build/gcc'
make: *** [bootstrap] Error 2
*** Error exit code 2
I'd be most grateful for any ideas anyone might have...
Thanks!
--
Skip Sopscak, Omaha, NE
alt email: dsopscak@home.com
http://mote.dhs.org/~dsopscak
Sent via PINE: Power Internet News & Email
^ permalink raw reply [flat|nested] 15+ messages in thread
end of thread, other threads:[~1999-10-01 0:00 UTC | newest]
Thread overview: 15+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
1999-09-03 15:35 egcs-19990830 HP-UX Problem Skip Sopscak
1999-09-04 8:21 ` Jeffrey A Law
1999-09-30 23:56 ` Jeffrey A Law
1999-10-01 0:00 ` Jeffrey A Law
1999-09-06 20:22 ` Tim Prince
1999-09-07 0:20 ` Jeffrey A Law
1999-09-30 23:56 ` Jeffrey A Law
1999-10-01 0:00 ` Jeffrey A Law
1999-09-30 23:56 ` Tim Prince
1999-10-01 0:00 ` Tim Prince
1999-09-06 23:41 ` Jeffrey A Law
1999-09-30 23:56 ` Jeffrey A Law
1999-10-01 0:00 ` Jeffrey A Law
1999-09-30 23:56 ` Skip Sopscak
1999-10-01 0:00 ` Skip Sopscak
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).