* Some error when installing the gcc9.4.0,when "make".
@ 2022-06-05 7:06 涂家礼
[not found] ` <dded06c330c45362fa72cc19f31991c187022986.camel@xry111.site>
2022-06-16 13:17 ` Segher Boessenkool
0 siblings, 2 replies; 4+ messages in thread
From: 涂家礼 @ 2022-06-05 7:06 UTC (permalink / raw)
To: gcc-help
Hello. I want to know how to solve a problem when install gcc without root and offline. I am installing GCC9.4.0, but there are some errors when executing make command, as follows:
make[4]: Entering directory `/public/home/jltu/gcc-9.4.0/gcc-9.4.0/lto-plugin'
/bin/sh ./libtool --tag=CC --tag=disable-static --mode=compile gcc -DHAVE_CONFIG_H -I. -I../../lto-plugin -I../../ lto-plugin/../include -DHAVE_CONFIG_H -Wall -g -c -o lto-plugin.lo ../../lto-plugin/lto-plugin.c
libtool: compile: gcc -DHAVE_CONFIG_H -I. -I../../lto-plugin -I../../lto-plugin/../include -DHAVE_CONFIG_H -Wall -g -c ../../lto-plugin/lto-plugin.c -fPIC -DPIC -o .libs/lto-plugin.o
make[4]: Warning: File `../libiberty/pic/libiberty.a' has modification time 8.1 s in the future
/bin/sh ./libtool --tag=CC --tag=disable-static --mode=link gcc -Wall -g -Wc,-static-libgcc -module -bindir /public /home/jltu/gcc_build/libexec/gcc/x86_64-pc-linux-gnu/9.4.0 -Xcompiler '-static-libstdc++' -Xcompiler '-static-libg cc' -o liblto_plugin.la -rpath /public/home/jltu/gcc_build/libexec/gcc/x86_64-pc-linux-gnu/9.4.0 lto-plugin.lo -Wc,. ./libiberty/pic/libiberty.a
libtool: link: gcc -shared -fPIC -DPIC .libs/lto-plugin.o -static-libgcc -static-libstdc++ -static-libgcc ../lib iberty/pic/libiberty.a -Wl,-soname -Wl,liblto_plugin.so.0 -o .libs/liblto_plugin.so.0.0.0
/usr/bin/ld: /usr/local/lib/gcc/x86_64-pc-linux-gnu/9.4.0/crtbeginS.o: unrecognized relocation (0x2a) in section `.te xt'
/usr/bin/ld: final link failed: Bad value
collect2: error: ld returned 1 exit status
make[4]: *** [liblto_plugin.la] Error 1
make[4]: Leaving directory `/public/home/jltu/gcc-9.4.0/gcc-9.4.0/lto-plugin'
make[3]: *** [all] Error 2
make[3]: Leaving directory `/public/home/jltu/gcc-9.4.0/gcc-9.4.0/lto-plugin'
make[2]: *** [all-stage1-lto-plugin] Error 2
make[2]: Leaving directory `/public/home/jltu/gcc-9.4.0/gcc-9.4.0'
make[1]: *** [stage1-bubble] Error 2
make[1]: Leaving directory `/public/home/jltu/gcc-9.4.0/gcc-9.4.0'
make: *** [all] Error 2
Regards
Jiali Tu
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: Re: Some error when installing the gcc9.4.0,when "make".
[not found] ` <dded06c330c45362fa72cc19f31991c187022986.camel@xry111.site>
@ 2022-06-16 8:25 ` 涂家礼
0 siblings, 0 replies; 4+ messages in thread
From: 涂家礼 @ 2022-06-16 8:25 UTC (permalink / raw)
To: Xi Ruoyao; +Cc: gcc-help
Thank you , the problem does!
"Xi Ruoyao" <xry111@xry111.site>写道:
> On Sun, 2022-06-05 at 15:06 +0800, 涂家礼 wrote:
>
> /* snip */
>
> > /usr/bin/ld: /usr/local/lib/gcc/x86_64-pc-linux-gnu/9.4.0/crtbeginS.o: unrecognized relocation (0x2a) in section `.text'
> > /usr/bin/ld: final link failed: Bad value
> > collect2: error: ld returned 1 exit status
> > make[4]: *** [liblto_plugin.la] Error 1
> > make[4]: Leaving directory `/public/home/jltu/gcc-9.4.0/gcc-9.4.0/lto-plugin'
> > make[3]: *** [all] Error 2
> > make[3]: Leaving directory `/public/home/jltu/gcc-9.4.0/gcc-9.4.0/lto-plugin'
> > make[2]: *** [all-stage1-lto-plugin] Error 2
> > make[2]: Leaving directory `/public/home/jltu/gcc-9.4.0/gcc-9.4.0'
> > make[1]: *** [stage1-bubble] Error 2
> > make[1]: Leaving directory `/public/home/jltu/gcc-9.4.0/gcc-9.4.0'
> > make: *** [all] Error 2
>
> According to a stackoverflow.com answer [1] it seems happening because
> your binutils is too old.
>
> [1]: https://stackoverflow.com/questions/52737698
>
> --
> Xi Ruoyao <xry111@xry111.site>
> School of Aerospace Science and Technology, Xidian University
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: Some error when installing the gcc9.4.0,when "make".
2022-06-05 7:06 Some error when installing the gcc9.4.0,when "make" 涂家礼
[not found] ` <dded06c330c45362fa72cc19f31991c187022986.camel@xry111.site>
@ 2022-06-16 13:17 ` Segher Boessenkool
2022-06-20 7:35 ` 涂家礼
1 sibling, 1 reply; 4+ messages in thread
From: Segher Boessenkool @ 2022-06-16 13:17 UTC (permalink / raw)
To: 涂家礼; +Cc: gcc-help
Hi!
On Sun, Jun 05, 2022 at 03:06:39PM +0800, 涂家礼 wrote:
> make[4]: Warning: File `../libiberty/pic/libiberty.a' has modification time 8.1 s in the future
This could be a serious problem. But, it seems unrelated to your
problem. OTOH, "make" very much does not like things that time travel.
> /usr/bin/ld: /usr/local/lib/gcc/x86_64-pc-linux-gnu/9.4.0/crtbeginS.o: unrecognized relocation (0x2a) in section `.text'
Your /usr/bin/ld does not know about the relocation
R_X86_64_REX_GOTPCRELX (which is numeric 42) apparently. Use a newer
linker? You likely used a newer linker and assembler etc. to compile
stuff, to get this far, so figure out why not now?
Segher
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: Re: Some error when installing the gcc9.4.0,when "make".
2022-06-16 13:17 ` Segher Boessenkool
@ 2022-06-20 7:35 ` 涂家礼
0 siblings, 0 replies; 4+ messages in thread
From: 涂家礼 @ 2022-06-20 7:35 UTC (permalink / raw)
To: Segher Boessenkool; +Cc: gcc-help
Thank you, I don't have root access to this computer to correct the system time, and after I backed out to an older gcc and updated a bunch of dependencies, I found that gcc 9.4.0 appears to be working correctly for an offline non-root install.
"Segher Boessenkool" <segher@kernel.crashing.org>写道:
> Hi!
>
> On Sun, Jun 05, 2022 at 03:06:39PM +0800, 涂家礼 wrote:
> > make[4]: Warning: File `../libiberty/pic/libiberty.a' has modification time 8.1 s in the future
>
> This could be a serious problem. But, it seems unrelated to your
> problem. OTOH, "make" very much does not like things that time travel.
>
> > /usr/bin/ld: /usr/local/lib/gcc/x86_64-pc-linux-gnu/9.4.0/crtbeginS.o: unrecognized relocation (0x2a) in section `.text'
>
> Your /usr/bin/ld does not know about the relocation
> R_X86_64_REX_GOTPCRELX (which is numeric 42) apparently. Use a newer
> linker? You likely used a newer linker and assembler etc. to compile
> stuff, to get this far, so figure out why not now?
>
>
> Segher
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2022-06-20 7:35 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-06-05 7:06 Some error when installing the gcc9.4.0,when "make" 涂家礼
[not found] ` <dded06c330c45362fa72cc19f31991c187022986.camel@xry111.site>
2022-06-16 8:25 ` 涂家礼
2022-06-16 13:17 ` Segher Boessenkool
2022-06-20 7:35 ` 涂家礼
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).