From: "Lawrence Hannon" <hannone@us.ibm.com>
To: gcc-help@gcc.gnu.org
Subject: problem building gcc 3.0.4 under AIX 5.1
Date: Mon, 14 Oct 2002 19:25:00 -0000 [thread overview]
Message-ID: <OFB9390185.5833E7C5-ON86256C53.000B9165@boulder.ibm.com> (raw)
[-- Attachment #1: Type: text/plain, Size: 355 bytes --]
Downloaded, ran "<srcdir>/configure" with no options from <objdir>, then
did "make bootstrap"
Make runs fine until stage2 build, then tries to run the cc command with
bogus arguments (see bottom few lines of attached output from the make)
Any suggestions would be appreciated
Thanks,
Lawrence Hannon
lar@post.com
(See attached file: gcc problem.txt)
[-- Attachment #2: gcc problem.txt --]
[-- Type: text/plain, Size: 7112 bytes --]
Target "all" is up to date.
echo timestamp > stmp-multilib
rm -f cxxmain.c
ln -s ../../gcc-3.0.4/gcc/../libiberty/cplus-dem.c cxxmain.c
cc -c -DMAIN -DIN_GCC -g -DHAVE_CONFIG_H -I. -I. -I../../gcc-3.0.4/gcc -I../../gcc-3.0.4/gcc/. -I../../gcc-3.0.4/gcc/config -I../../gcc-3.0.4/gcc/../include -DVERSION=\"3.0.4\" cxxmain.c
cc -o c++filt -DIN_GCC -g -DHAVE_CONFIG_H cxxmain.o underscore.o obstack.o alloca.o ./intl/libintl.a -lld ../libiberty/libiberty.a
Target "all" is up to date.
echo timestamp > stage1_build
echo stage1_build > stage_last
make stage1
if [ -d stage1 ] ; then true ; else mkdir stage1 ; fi
make -f libgcc.mk libgcc-stage-start stage=stage1
for dir in libgcc libgcc/pthread libgcc/power libgcc/powerpc libgcc/ppc64 libgcc/pthread/power libgcc/pthread/powerpc libgcc/pthread/ppc64; do if [ -d stage1/$dir ]; then true; else mkdir stage1/$dir; fi; done
for dir in libgcc libgcc/pthread libgcc/power libgcc/powerpc libgcc/ppc64 libgcc/pthread/power libgcc/pthread/powerpc libgcc/pthread/ppc64; do mv $dir/*.o stage1/$dir; done
for dir in intl cp f java objc ; do if [ -d stage1/$dir ] ; then true ; else mkdir stage1/$dir ; fi ; done
mv *.o insn-flags.h insn-config.h insn-codes.h insn-output.c insn-recog.c insn-emit.c insn-extract.c insn-peep.c insn-attr.h insn-attrtab.c insn-opinit.c tree-check.h s-flags s-config s-codes s-mlib s-under s-genrtl s-output s-recog s-emit s-extract s-peep s-check s-attr s-attrtab s-opinit s-crt0 genemit genoutput genrecog genextract genflags gencodes genconfig genpeep genattrtab genattr genopinit gengenrtl gencheck genrtl.c genrtl.h xgcc cpp cc1 cpp0 gcc-cross cc1obj enquire protoize unprotoize specs collect2 collect2 underscore.c tradcpp0 gcov *.[0-9][0-9].* *.[si] libcpp.a libbackend.a libgcc.mk g++ g++-cross cc1plus g77 g77-cross f771 jc1 gcj jvgenmain gcjh jv-scan jcf-dump stage1
mv: 0653-401 Cannot rename s-crt0 to stage1/s-crt0:
A file or directory in the path name does not exist.
mv: 0653-401 Cannot rename gcc-cross to stage1/gcc-cross:
A file or directory in the path name does not exist.
mv: 0653-401 Cannot rename cc1obj to stage1/cc1obj:
A file or directory in the path name does not exist.
mv: 0653-401 Cannot rename enquire to stage1/enquire:
A file or directory in the path name does not exist.
mv: 0653-401 Cannot rename protoize to stage1/protoize:
A file or directory in the path name does not exist.
mv: 0653-401 Cannot rename unprotoize to stage1/unprotoize:
A file or directory in the path name does not exist.
mv: 0653-401 Cannot rename collect2 to stage1/collect2:
A file or directory in the path name does not exist.
mv: 0653-401 Cannot rename gcov to stage1/gcov:
A file or directory in the path name does not exist.
mv: 0653-401 Cannot rename *.[0-9][0-9].* to stage1/*.[0-9][0-9].*:
A file or directory in the path name does not exist.
mv: 0653-401 Cannot rename *.[si] to stage1/*.[si]:
A file or directory in the path name does not exist.
mv: 0653-401 Cannot rename g++-cross to stage1/g++-cross:
A file or directory in the path name does not exist.
mv: 0653-401 Cannot rename cc1plus to stage1/cc1plus:
A file or directory in the path name does not exist.
mv: 0653-401 Cannot rename g77 to stage1/g77:
A file or directory in the path name does not exist.
mv: 0653-401 Cannot rename g77-cross to stage1/g77-cross:
A file or directory in the path name does not exist.
mv: 0653-401 Cannot rename f771 to stage1/f771:
A file or directory in the path name does not exist.
mv: 0653-401 Cannot rename jc1 to stage1/jc1:
A file or directory in the path name does not exist.
mv: 0653-401 Cannot rename jvgenmain to stage1/jvgenmain:
A file or directory in the path name does not exist.
mv: 0653-401 Cannot rename gcjh to stage1/gcjh:
A file or directory in the path name does not exist.
mv: 0653-401 Cannot rename jv-scan to stage1/jv-scan:
A file or directory in the path name does not exist.
mv: 0653-401 Cannot rename jcf-dump to stage1/jcf-dump:
A file or directory in the path name does not exist.
make: 1254-004 The error code from the last command is 1.
make: 1254-005 Ignored error code 1 from last command.
mv intl/*.o stage1/intl
if [ -f as ] ; then ln -s ../as stage1 ; else true ; fi
if [ -f ld ] ; then ln -s ../ld stage1 ; else true ; fi
if [ -f collect-ld ] ; then ln -s ../collect-ld stage1 ; else true ; fi
rm -f stage1/libgcc.a
cp libgcc.a stage1
if [ -f ranlib ] || ( [ "powerpc-ibm-aix5.1.0.0" = "powerpc-ibm-aix5.1.0.0" ] && [ -f /usr/bin/ranlib -o -f /bin/ranlib ] ) ; then ranlib stage1/libgcc.a; else true; fi
for f in .. ; do if [ x${f} != x.. ]; then cp stage1/${f} . ; else true; fi; done
mv cp/*.o stage1/cp
mv: 0653-401 Cannot rename cp/*.o to stage1/cp/*.o:
A file or directory in the path name does not exist.
make: 1254-004 The error code from the last command is 1.
make: 1254-005 Ignored error code 1 from last command.
if [ -f lang-f77 ]; then mv -f f/*.o f/fini f/stamp-str f/str-*.h f/str-*.j lang-f77 g77spec.o g77version.o stage1/f; fi
mv java/*.o stage1/java
mv: 0653-401 Cannot rename java/*.o to stage1/java/*.o:
A file or directory in the path name does not exist.
make: 1254-004 The error code from the last command is 1.
make: 1254-005 Ignored error code 1 from last command.
mv objc/*.o stage1/objc
mv: 0653-401 Cannot rename objc/*.o to stage1/objc/*.o:
A file or directory in the path name does not exist.
make: 1254-004 The error code from the last command is 1.
make: 1254-005 Ignored error code 1 from last command.
mv cc1obj stage1
mv: 0653-401 Cannot rename cc1obj to stage1/cc1obj:
A file or directory in the path name does not exist.
make: 1254-004 The error code from the last command is 1.
make: 1254-005 Ignored error code 1 from last command.
Target "stage1" is up to date.
echo timestamp > stage1_copy
echo stage2_build > stage_last
make CC="stage1/xgcc -Bstage1/ -B/usr/local/powerpc-ibm-aix5.1.0.0/bin/" STAGE_PREFIX=stage1/ CFLAGS="-g -O2" LDFLAGS="" WARN_CFLAGS="\$(GCC_WARN_CFLAGS)" STRICT_WARN="-Wtraditional -pedantic -Wno-long-long" libdir=/usr/local/lib LANGUAGES="c gcov c++ f77 java objc" MAKEOVERRIDES= OUTPUT_OPTION="-o \$@"
cc -c -DIN_GCC -g -O2 -W -Wall -Wwrite-strings -Wstrict-prototypes -Wmissing-prototypes -Wtraditional -pedantic -Wno-long-long -DHAVE_CONFIG_H -DGENERATOR_FILE -I. -I. -I../../gcc-3.0.4/gcc -I../../gcc-3.0.4/gcc/. -I../../gcc-3.0.4/gcc/config -I../../gcc-3.0.4/gcc/../include ../../gcc-3.0.4/gcc/gengenrtl.c
cc: 1501-208 command option W is missing a subargument
make: 1254-004 The error code from the last command is 40.
Stop.
make: 1254-004 The error code from the last command is 2.
Stop.
make: 1254-004 The error code from the last command is 2.
Stop.
[lhannon@sln81] /bench1/tmp/lhannon/gnu >
Script command is complete on Mon Oct 14 22:11:07 EDT 2002
next reply other threads:[~2002-10-15 2:25 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-10-14 19:25 Lawrence Hannon [this message]
2002-10-24 14:56 ` David Edelsohn
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=OFB9390185.5833E7C5-ON86256C53.000B9165@boulder.ibm.com \
--to=hannone@us.ibm.com \
--cc=gcc-help@gcc.gnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).