From: "Roger Sayle" <roger@nextmovesoftware.com>
To: "'GCC Patches'" <gcc-patches@gcc.gnu.org>
Subject: [PATCH] x86_64: Implement V1TI mode shifts/rotates by a constant
Date: Sun, 24 Oct 2021 17:34:20 +0100 [thread overview]
Message-ID: <010301d7c8f4$ff972570$fec57050$@nextmovesoftware.com> (raw)
[-- Attachment #1: Type: text/plain, Size: 3398 bytes --]
This patch provides RTL expanders to implement logical shifts and
rotates of 128-bit values (stored in vector integer registers) by
constant bit counts. Previously, GCC would transfer these values
to a pair of scalar registers (TImode) via memory to perform the
operation, then transfer the result back via memory. Instead these
operations are now expanded using (between 1 and 5) SSE2 vector
instructions.
Logical shifts by multiples of 8 can be implemented using x86_64's
pslldq/psrldq instruction:
ashl_8: pslldq $1, %xmm0
ret
lshr_32:
psrldq $4, %xmm0
ret
Logical shifts by greater than 64 can use pslldq/psrldq $8, followed
by a psllq/psrlq for the remaining bits:
ashl_111:
pslldq $8, %xmm0
psllq $47, %xmm0
ret
lshr_127:
psrldq $8, %xmm0
psrlq $63, %xmm0
ret
The remaining logical shifts make use of the following idiom:
ashl_1:
movdqa %xmm0, %xmm1
psllq $1, %xmm0
pslldq $8, %xmm1
psrlq $63, %xmm1
por %xmm1, %xmm0
ret
lshr_15:
movdqa %xmm0, %xmm1
psrlq $15, %xmm0
psrldq $8, %xmm1
psllq $49, %xmm1
por %xmm1, %xmm0
ret
Rotates by multiples of 32 can use x86_64's pshufd:
rotr_32:
pshufd $57, %xmm0, %xmm0
ret
rotr_64:
pshufd $78, %xmm0, %xmm0
ret
rotr_96:
pshufd $147, %xmm0, %xmm0
ret
Rotates by multiples of 8 (other than multiples of 32) can make
use of both pslldq and psrldq, followed by por:
rotr_8:
movdqa %xmm0, %xmm1
psrldq $1, %xmm0
pslldq $15, %xmm1
por %xmm1, %xmm0
ret
rotr_112:
movdqa %xmm0, %xmm1
psrldq $14, %xmm0
pslldq $2, %xmm1
por %xmm1, %xmm0
ret
And the remaining rotates use one or two pshufd, followed by a
psrld/pslld/por sequence:
rotr_1:
movdqa %xmm0, %xmm1
pshufd $57, %xmm0, %xmm0
psrld $1, %xmm1
pslld $31, %xmm0
por %xmm1, %xmm0
ret
rotr_63:
pshufd $78, %xmm0, %xmm1
pshufd $57, %xmm0, %xmm0
pslld $1, %xmm1
psrld $31, %xmm0
por %xmm1, %xmm0
ret
rotr_111:
pshufd $147, %xmm0, %xmm1
pslld $17, %xmm0
psrld $15, %xmm1
por %xmm1, %xmm0
ret
The new test case, sse2-v1ti-shift.c, is a run-time check to confirm that
the results of V1TImode shifts/rotates by constants, exactly match the
expected results of TImode operations, for various input test vectors.
This patch has been tested on x86_64-pc-linux-gnu with make bootstrap
and make -k check with no new failures. Ok for mainline?
2021-10-24 Roger Sayle <roger@nextmovesoftware.com>
gcc/ChangeLog
* config/i386/i386-expand.c (ix86_expand_v1ti_shift): New helper
function to expand V1TI mode logical shifts by integer constants.
(ix86_expand_v1ti_rotate): New helper function to expand V1TI
mode rotations by integer constants.
* config/i386/i386-protos.h (ix86_expand_v1ti_shift,
ix86_expand_v1ti_rotate): Prototype new functions here.
* config/i386/sse.md (ashlv1ti3, lshrv1ti3, rotlv1ti3, rotrv1ti3):
New TARGET_SSE2 expanders to implement V1TI shifts and rotations.
gcc/testsuite/ChangeLog
* gcc.target/i386/sse2-v1ti-shift.c: New test case.
Thanks in advance,
Roger
--
[-- Attachment #2: patchv.txt --]
[-- Type: text/plain, Size: 15370 bytes --]
diff --git a/gcc/config/i386/i386-expand.c b/gcc/config/i386/i386-expand.c
index 56dd99b..4c3800e 100644
--- a/gcc/config/i386/i386-expand.c
+++ b/gcc/config/i386/i386-expand.c
@@ -6157,6 +6157,169 @@ ix86_split_lshr (rtx *operands, rtx scratch, machine_mode mode)
}
}
+/* Expand V1TI mode shift (of rtx_code CODE) by constant. */
+void ix86_expand_v1ti_shift (enum rtx_code code, rtx operands[])
+{
+ HOST_WIDE_INT bits = INTVAL (operands[2]) & 127;
+ rtx op1 = force_reg (V1TImode, operands[1]);
+
+ if (bits == 0)
+ {
+ emit_move_insn (operands[0], op1);
+ return;
+ }
+
+ if ((bits & 7) == 0)
+ {
+ rtx tmp = gen_reg_rtx (V1TImode);
+ if (code == ASHIFT)
+ emit_insn (gen_sse2_ashlv1ti3 (tmp, op1, GEN_INT (bits)));
+ else
+ emit_insn (gen_sse2_lshrv1ti3 (tmp, op1, GEN_INT (bits)));
+ emit_move_insn (operands[0], tmp);
+ return;
+ }
+
+ rtx tmp1 = gen_reg_rtx (V1TImode);
+ if (code == ASHIFT)
+ emit_insn (gen_sse2_ashlv1ti3 (tmp1, op1, GEN_INT (64)));
+ else
+ emit_insn (gen_sse2_lshrv1ti3 (tmp1, op1, GEN_INT (64)));
+
+ /* tmp2 is operands[1] shifted by 64, in V2DImode. */
+ rtx tmp2 = gen_reg_rtx (V2DImode);
+ emit_move_insn (tmp2, gen_lowpart (V2DImode, tmp1));
+
+ /* tmp3 will be the V2DImode result. */
+ rtx tmp3 = gen_reg_rtx (V2DImode);
+
+ if (bits > 64)
+ {
+ if (code == ASHIFT)
+ emit_insn (gen_ashlv2di3 (tmp3, tmp2, GEN_INT (bits - 64)));
+ else
+ emit_insn (gen_lshrv2di3 (tmp3, tmp2, GEN_INT (bits - 64)));
+ }
+ else
+ {
+ /* tmp4 is operands[1], in V2DImode. */
+ rtx tmp4 = gen_reg_rtx (V2DImode);
+ emit_move_insn (tmp4, gen_lowpart (V2DImode, op1));
+
+ rtx tmp5 = gen_reg_rtx (V2DImode);
+ if (code == ASHIFT)
+ emit_insn (gen_ashlv2di3 (tmp5, tmp4, GEN_INT (bits)));
+ else
+ emit_insn (gen_lshrv2di3 (tmp5, tmp4, GEN_INT (bits)));
+
+ rtx tmp6 = gen_reg_rtx (V2DImode);
+ if (code == ASHIFT)
+ emit_insn (gen_lshrv2di3 (tmp6, tmp2, GEN_INT (64 - bits)));
+ else
+ emit_insn (gen_ashlv2di3 (tmp6, tmp2, GEN_INT (64 - bits)));
+
+ emit_insn (gen_iorv2di3 (tmp3, tmp5, tmp6));
+ }
+
+ /* Convert the result back to V1TImode and store in operands[0]. */
+ rtx tmp7 = gen_reg_rtx (V1TImode);
+ emit_move_insn (tmp7, gen_lowpart (V1TImode, tmp3));
+ emit_move_insn (operands[0], tmp7);
+}
+
+/* Expand V1TI mode rotate (of rtx_code CODE) by constant. */
+void ix86_expand_v1ti_rotate (enum rtx_code code, rtx operands[])
+{
+ HOST_WIDE_INT bits = INTVAL (operands[2]) & 127;
+ rtx op1 = force_reg (V1TImode, operands[1]);
+
+ if (bits == 0)
+ {
+ emit_move_insn (operands[0], op1);
+ return;
+ }
+
+ if (code == ROTATERT)
+ bits = 128 - bits;
+
+ if ((bits & 31) == 0)
+ {
+ rtx tmp1 = gen_reg_rtx (V4SImode);
+ rtx tmp2 = gen_reg_rtx (V4SImode);
+ rtx tmp3 = gen_reg_rtx (V1TImode);
+
+ emit_move_insn (tmp1, gen_lowpart (V4SImode, op1));
+ if (bits == 32)
+ emit_insn (gen_sse2_pshufd (tmp2, tmp1, GEN_INT (0x93)));
+ else if (bits == 64)
+ emit_insn (gen_sse2_pshufd (tmp2, tmp1, GEN_INT (0x4e)));
+ else
+ emit_insn (gen_sse2_pshufd (tmp2, tmp1, GEN_INT (0x39)));
+ emit_move_insn (tmp3, gen_lowpart (V1TImode, tmp2));
+ emit_move_insn (operands[0], tmp3);
+ return;
+ }
+
+ if ((bits & 7) == 0)
+ {
+ rtx tmp1 = gen_reg_rtx (V1TImode);
+ rtx tmp2 = gen_reg_rtx (V1TImode);
+ rtx tmp3 = gen_reg_rtx (V1TImode);
+
+ emit_insn (gen_sse2_ashlv1ti3 (tmp1, op1, GEN_INT (bits)));
+ emit_insn (gen_sse2_lshrv1ti3 (tmp2, op1, GEN_INT (128 - bits)));
+ emit_insn (gen_iorv1ti3 (tmp3, tmp1, tmp2));
+ emit_move_insn (operands[0], tmp3);
+ return;
+ }
+
+ rtx op1_v4si = gen_reg_rtx (V4SImode);
+ emit_move_insn (op1_v4si, gen_lowpart (V4SImode, op1));
+
+ rtx lobits;
+ rtx hibits;
+
+ switch (bits >> 5)
+ {
+ case 0:
+ lobits = op1_v4si;
+ hibits = gen_reg_rtx (V4SImode);
+ emit_insn (gen_sse2_pshufd (hibits, op1_v4si, GEN_INT (0x93)));
+ break;
+
+ case 1:
+ lobits = gen_reg_rtx (V4SImode);
+ hibits = gen_reg_rtx (V4SImode);
+ emit_insn (gen_sse2_pshufd (lobits, op1_v4si, GEN_INT (0x93)));
+ emit_insn (gen_sse2_pshufd (hibits, op1_v4si, GEN_INT (0x4e)));
+ break;
+
+ case 2:
+ lobits = gen_reg_rtx (V4SImode);
+ hibits = gen_reg_rtx (V4SImode);
+ emit_insn (gen_sse2_pshufd (lobits, op1_v4si, GEN_INT (0x4e)));
+ emit_insn (gen_sse2_pshufd (hibits, op1_v4si, GEN_INT (0x39)));
+ break;
+
+ default:
+ lobits = gen_reg_rtx (V4SImode);
+ emit_insn (gen_sse2_pshufd (lobits, op1_v4si, GEN_INT (0x39)));
+ hibits = op1_v4si;
+ break;
+ }
+
+ rtx tmp1 = gen_reg_rtx (V4SImode);
+ rtx tmp2 = gen_reg_rtx (V4SImode);
+ rtx tmp3 = gen_reg_rtx (V4SImode);
+ rtx tmp4 = gen_reg_rtx (V1TImode);
+
+ emit_insn (gen_ashlv4si3 (tmp1, lobits, GEN_INT (bits & 31)));
+ emit_insn (gen_lshrv4si3 (tmp2, hibits, GEN_INT (32 - (bits & 31))));
+ emit_insn (gen_iorv4si3 (tmp3, tmp1, tmp2));
+ emit_move_insn (tmp4, gen_lowpart (V1TImode, tmp3));
+ emit_move_insn (operands[0], tmp4);
+}
+
/* Return mode for the memcpy/memset loop counter. Prefer SImode over
DImode for constant loop counts. */
diff --git a/gcc/config/i386/i386-protos.h b/gcc/config/i386/i386-protos.h
index 708834a..9918a28 100644
--- a/gcc/config/i386/i386-protos.h
+++ b/gcc/config/i386/i386-protos.h
@@ -159,6 +159,8 @@ extern void ix86_split_long_move (rtx[]);
extern void ix86_split_ashl (rtx *, rtx, machine_mode);
extern void ix86_split_ashr (rtx *, rtx, machine_mode);
extern void ix86_split_lshr (rtx *, rtx, machine_mode);
+extern void ix86_expand_v1ti_shift (enum rtx_code, rtx[]);
+extern void ix86_expand_v1ti_rotate (enum rtx_code, rtx[]);
extern rtx ix86_find_base_term (rtx);
extern bool ix86_check_movabs (rtx, int);
extern bool ix86_check_no_addr_space (rtx);
diff --git a/gcc/config/i386/sse.md b/gcc/config/i386/sse.md
index f37c5c0..3ff4579 100644
--- a/gcc/config/i386/sse.md
+++ b/gcc/config/i386/sse.md
@@ -15023,6 +15023,50 @@
operands[4] = gen_lowpart (<MODE>mode, operands[3]);
})
+(define_expand "ashlv1ti3"
+ [(set (match_operand:V1TI 0 "register_operand")
+ (ashift:V1TI
+ (match_operand:V1TI 1 "register_operand")
+ (match_operand:SI 2 "const_int_operand")))]
+ "TARGET_SSE2"
+{
+ ix86_expand_v1ti_shift (ASHIFT, operands);
+ DONE;
+})
+
+(define_expand "lshrv1ti3"
+ [(set (match_operand:V1TI 0 "register_operand")
+ (lshiftrt:V1TI
+ (match_operand:V1TI 1 "register_operand")
+ (match_operand:SI 2 "const_int_operand")))]
+ "TARGET_SSE2"
+{
+ ix86_expand_v1ti_shift (LSHIFTRT, operands);
+ DONE;
+})
+
+(define_expand "rotlv1ti3"
+ [(set (match_operand:V1TI 0 "register_operand")
+ (rotate:V1TI
+ (match_operand:V1TI 1 "register_operand")
+ (match_operand:SI 2 "const_int_operand")))]
+ "TARGET_SSE2"
+{
+ ix86_expand_v1ti_rotate (ROTATE, operands);
+ DONE;
+})
+
+(define_expand "rotrv1ti3"
+ [(set (match_operand:V1TI 0 "register_operand")
+ (rotatert:V1TI
+ (match_operand:V1TI 1 "register_operand")
+ (match_operand:SI 2 "const_int_operand")))]
+ "TARGET_SSE2"
+{
+ ix86_expand_v1ti_rotate (ROTATERT, operands);
+ DONE;
+})
+
(define_insn "avx512bw_<insn><mode>3"
[(set (match_operand:VIMAX_AVX512VL 0 "register_operand" "=v")
(any_lshift:VIMAX_AVX512VL
diff --git a/gcc/testsuite/gcc.target/i386/sse2-v1ti-shift.c b/gcc/testsuite/gcc.target/i386/sse2-v1ti-shift.c
new file mode 100644
index 0000000..dbae418
--- /dev/null
+++ b/gcc/testsuite/gcc.target/i386/sse2-v1ti-shift.c
@@ -0,0 +1,212 @@
+/* { dg-do run { target int128 } } */
+/* { dg-options "-O2 -msse2" } */
+/* { dg-require-effective-target sse2 } */
+
+typedef unsigned __int128 v1ti __attribute__ ((__vector_size__ (16)));
+typedef unsigned __int128 ti;
+
+ti ashl(ti x, unsigned int i) { return x << i; }
+ti lshr(ti x, unsigned int i) { return x >> i; }
+ti rotr(ti x, unsigned int i) { return (x >> i) | (x << (128-i)); }
+
+v1ti ashl_1(v1ti x) { return x << 1; }
+v1ti ashl_2(v1ti x) { return x << 2; }
+v1ti ashl_7(v1ti x) { return x << 7; }
+v1ti ashl_8(v1ti x) { return x << 8; }
+v1ti ashl_9(v1ti x) { return x << 9; }
+v1ti ashl_15(v1ti x) { return x << 15; }
+v1ti ashl_16(v1ti x) { return x << 16; }
+v1ti ashl_17(v1ti x) { return x << 17; }
+v1ti ashl_31(v1ti x) { return x << 31; }
+v1ti ashl_32(v1ti x) { return x << 32; }
+v1ti ashl_33(v1ti x) { return x << 33; }
+v1ti ashl_63(v1ti x) { return x << 63; }
+v1ti ashl_64(v1ti x) { return x << 64; }
+v1ti ashl_65(v1ti x) { return x << 65; }
+v1ti ashl_72(v1ti x) { return x << 72; }
+v1ti ashl_95(v1ti x) { return x << 95; }
+v1ti ashl_96(v1ti x) { return x << 96; }
+v1ti ashl_97(v1ti x) { return x << 97; }
+v1ti ashl_111(v1ti x) { return x << 111; }
+v1ti ashl_112(v1ti x) { return x << 112; }
+v1ti ashl_113(v1ti x) { return x << 113; }
+v1ti ashl_119(v1ti x) { return x << 119; }
+v1ti ashl_120(v1ti x) { return x << 120; }
+v1ti ashl_121(v1ti x) { return x << 121; }
+v1ti ashl_126(v1ti x) { return x << 126; }
+v1ti ashl_127(v1ti x) { return x << 127; }
+
+v1ti lshr_1(v1ti x) { return x >> 1; }
+v1ti lshr_2(v1ti x) { return x >> 2; }
+v1ti lshr_7(v1ti x) { return x >> 7; }
+v1ti lshr_8(v1ti x) { return x >> 8; }
+v1ti lshr_9(v1ti x) { return x >> 9; }
+v1ti lshr_15(v1ti x) { return x >> 15; }
+v1ti lshr_16(v1ti x) { return x >> 16; }
+v1ti lshr_17(v1ti x) { return x >> 17; }
+v1ti lshr_31(v1ti x) { return x >> 31; }
+v1ti lshr_32(v1ti x) { return x >> 32; }
+v1ti lshr_33(v1ti x) { return x >> 33; }
+v1ti lshr_63(v1ti x) { return x >> 63; }
+v1ti lshr_64(v1ti x) { return x >> 64; }
+v1ti lshr_65(v1ti x) { return x >> 65; }
+v1ti lshr_72(v1ti x) { return x >> 72; }
+v1ti lshr_95(v1ti x) { return x >> 95; }
+v1ti lshr_96(v1ti x) { return x >> 96; }
+v1ti lshr_97(v1ti x) { return x >> 97; }
+v1ti lshr_111(v1ti x) { return x >> 111; }
+v1ti lshr_112(v1ti x) { return x >> 112; }
+v1ti lshr_113(v1ti x) { return x >> 113; }
+v1ti lshr_119(v1ti x) { return x >> 119; }
+v1ti lshr_120(v1ti x) { return x >> 120; }
+v1ti lshr_121(v1ti x) { return x >> 121; }
+v1ti lshr_126(v1ti x) { return x >> 126; }
+v1ti lshr_127(v1ti x) { return x >> 127; }
+
+v1ti rotr_1(v1ti x) { return (x >> 1) | (x << 127); }
+v1ti rotr_2(v1ti x) { return (x >> 2) | (x << 126); }
+v1ti rotr_7(v1ti x) { return (x >> 7) | (x << 121); }
+v1ti rotr_8(v1ti x) { return (x >> 8) | (x << 120); }
+v1ti rotr_9(v1ti x) { return (x >> 9) | (x << 119); }
+v1ti rotr_15(v1ti x) { return (x >> 15) | (x << 113); }
+v1ti rotr_16(v1ti x) { return (x >> 16) | (x << 112); }
+v1ti rotr_17(v1ti x) { return (x >> 17) | (x << 111); }
+v1ti rotr_31(v1ti x) { return (x >> 31) | (x << 97); }
+v1ti rotr_32(v1ti x) { return (x >> 32) | (x << 96); }
+v1ti rotr_33(v1ti x) { return (x >> 33) | (x << 95); }
+v1ti rotr_63(v1ti x) { return (x >> 63) | (x << 65); }
+v1ti rotr_64(v1ti x) { return (x >> 64) | (x << 64); }
+v1ti rotr_65(v1ti x) { return (x >> 65) | (x << 63); }
+v1ti rotr_72(v1ti x) { return (x >> 72) | (x << 56); }
+v1ti rotr_95(v1ti x) { return (x >> 95) | (x << 33); }
+v1ti rotr_96(v1ti x) { return (x >> 96) | (x << 32); }
+v1ti rotr_97(v1ti x) { return (x >> 97) | (x << 31); }
+v1ti rotr_111(v1ti x) { return (x >> 111) | (x << 17); }
+v1ti rotr_112(v1ti x) { return (x >> 112) | (x << 16); }
+v1ti rotr_113(v1ti x) { return (x >> 113) | (x << 15); }
+v1ti rotr_119(v1ti x) { return (x >> 119) | (x << 9); }
+v1ti rotr_120(v1ti x) { return (x >> 120) | (x << 8); }
+v1ti rotr_121(v1ti x) { return (x >> 121) | (x << 7); }
+v1ti rotr_126(v1ti x) { return (x >> 126) | (x << 2); }
+v1ti rotr_127(v1ti x) { return (x >> 127) | (x << 1); }
+
+
+typedef v1ti (*fun)(v1ti);
+
+struct {
+ unsigned int i;
+ fun ashl;
+ fun lshr;
+ fun rotr;
+} table[26] = {
+ { 1, ashl_1, lshr_1, rotr_1 },
+ { 2, ashl_2, lshr_2, rotr_2 },
+ { 7, ashl_7, lshr_7, rotr_7 },
+ { 8, ashl_8, lshr_8, rotr_8 },
+ { 9, ashl_9, lshr_9, rotr_9 },
+ { 15, ashl_15, lshr_15, rotr_15 },
+ { 16, ashl_16, lshr_16, rotr_16 },
+ { 17, ashl_17, lshr_17, rotr_17 },
+ { 31, ashl_31, lshr_31, rotr_31 },
+ { 32, ashl_32, lshr_32, rotr_32 },
+ { 33, ashl_33, lshr_33, rotr_33 },
+ { 63, ashl_63, lshr_63, rotr_63 },
+ { 64, ashl_64, lshr_64, rotr_64 },
+ { 65, ashl_65, lshr_65, rotr_65 },
+ { 72, ashl_72, lshr_72, rotr_72 },
+ { 95, ashl_95, lshr_95, rotr_95 },
+ { 96, ashl_96, lshr_96, rotr_96 },
+ { 97, ashl_97, lshr_97, rotr_97 },
+ { 111, ashl_111, lshr_111, rotr_111 },
+ { 112, ashl_112, lshr_112, rotr_112 },
+ { 113, ashl_113, lshr_113, rotr_113 },
+ { 119, ashl_119, lshr_119, rotr_119 },
+ { 120, ashl_120, lshr_120, rotr_120 },
+ { 121, ashl_121, lshr_121, rotr_121 },
+ { 126, ashl_126, lshr_126, rotr_126 },
+ { 127, ashl_127, lshr_127, rotr_127 }
+};
+
+void test(ti x)
+{
+ unsigned int i;
+ v1ti t = (v1ti)x;
+
+ for (i=0; i<(sizeof(table)/sizeof(table[0])); i++) {
+ if ((ti)(*table[i].ashl)(t) != ashl(x,table[i].i))
+ __builtin_abort();
+ if ((ti)(*table[i].lshr)(t) != lshr(x,table[i].i))
+ __builtin_abort();
+ if ((ti)(*table[i].rotr)(t) != rotr(x,table[i].i))
+ __builtin_abort();
+ }
+}
+
+int main()
+{
+ ti x;
+
+ x = ((ti)0x0011223344556677ull)<<64 | 0x8899aabbccddeeffull;
+ test(x);
+ x = ((ti)0xffeeddccbbaa9988ull)<<64 | 0x7766554433221100ull;
+ test(x);
+ x = ((ti)0x0123456789abcdefull)<<64 | 0x0123456789abcdefull;
+ test(x);
+ x = ((ti)0xfedcba9876543210ull)<<64 | 0xfedcba9876543210ull;
+ test(x);
+ x = ((ti)0x0123456789abcdefull)<<64 | 0xfedcba9876543210ull;
+ test(x);
+ x = ((ti)0xfedcba9876543210ull)<<64 | 0x0123456789abcdefull;
+ test(x);
+ x = 0;
+ test(x);
+ x = 0xffffffffffffffffull;
+ test(x);
+ x = ((ti)0xffffffffffffffffull)<<64;
+ test(x);
+ x = ((ti)0xffffffffffffffffull)<<64 | 0xffffffffffffffffull;
+ test(x);
+ x = ((ti)0x5a5a5a5a5a5a5a5aull)<<64 | 0x5a5a5a5a5a5a5a5aull;
+ test(x);
+ x = ((ti)0xa5a5a5a5a5a5a5a5ull)<<64 | 0xa5a5a5a5a5a5a5a5ull;
+ test(x);
+ x = 0xffull;
+ test(x);
+ x = 0xff00ull;
+ test(x);
+ x = 0xff0000ull;
+ test(x);
+ x = 0xff000000ull;
+ test(x);
+ x = 0xff00000000ull;
+ test(x);
+ x = 0xff0000000000ull;
+ test(x);
+ x = 0xff000000000000ull;
+ test(x);
+ x = 0xff00000000000000ull;
+ test(x);
+ x = ((ti)0xffull)<<64;
+ test(x);
+ x = ((ti)0xff00ull)<<64;
+ test(x);
+ x = ((ti)0xff0000ull)<<64;
+ test(x);
+ x = ((ti)0xff000000ull)<<64;
+ test(x);
+ x = ((ti)0xff00000000ull)<<64;
+ test(x);
+ x = ((ti)0xff0000000000ull)<<64;
+ test(x);
+ x = ((ti)0xff000000000000ull)<<64;
+ test(x);
+ x = ((ti)0xff00000000000000ull)<<64;
+ test(x);
+ x = 0xdeadbeefcafebabeull;
+ test(x);
+ x = ((ti)0xdeadbeefcafebabeull)<<64;
+ test(x);
+
+ return 0;
+}
+
next reply other threads:[~2021-10-24 16:34 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-10-24 16:34 Roger Sayle [this message]
2021-10-25 8:02 ` Uros Bizjak
2021-10-25 14:16 ` Roger Sayle
2021-10-25 18:57 ` Uros Bizjak
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='010301d7c8f4$ff972570$fec57050$@nextmovesoftware.com' \
--to=roger@nextmovesoftware.com \
--cc=gcc-patches@gcc.gnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).