* [PATCH] LoongArch: Expand left rotate to right rotate with negated amount
@ 2023-12-18 13:43 Xi Ruoyao
2023-12-23 7:00 ` chenglulu
0 siblings, 1 reply; 5+ messages in thread
From: Xi Ruoyao @ 2023-12-18 13:43 UTC (permalink / raw)
To: gcc-patches; +Cc: chenglulu, i, xuchenghua, c, Xi Ruoyao
gcc/ChangeLog:
* config/loongarch/loongarch.md (rotl<mode>3):
New define_expand.
* config/loongarch/simd.md (vrotl<mode>3): Likewise.
(rotl<mode>3): Likewise.
gcc/testsuite/ChangeLog:
* gcc.target/loongarch/rotl-with-rotr.c: New test.
* gcc.target/loongarch/rotl-with-vrotr.c: New test.
* gcc.target/loongarch/rotl-with-xvrotr.c: New test.
---
Bootstrapped and regtested on loongarch64-linux-gnu. Ok for trunk?
gcc/config/loongarch/loongarch.md | 12 ++++++++
gcc/config/loongarch/simd.md | 29 +++++++++++++++++++
.../gcc.target/loongarch/rotl-with-rotr.c | 9 ++++++
.../gcc.target/loongarch/rotl-with-vrotr.c | 24 +++++++++++++++
.../gcc.target/loongarch/rotl-with-xvrotr.c | 7 +++++
5 files changed, 81 insertions(+)
create mode 100644 gcc/testsuite/gcc.target/loongarch/rotl-with-rotr.c
create mode 100644 gcc/testsuite/gcc.target/loongarch/rotl-with-vrotr.c
create mode 100644 gcc/testsuite/gcc.target/loongarch/rotl-with-xvrotr.c
diff --git a/gcc/config/loongarch/loongarch.md b/gcc/config/loongarch/loongarch.md
index 30025bf1908..939432b83e0 100644
--- a/gcc/config/loongarch/loongarch.md
+++ b/gcc/config/loongarch/loongarch.md
@@ -2903,6 +2903,18 @@ (define_insn "rotrsi3_extend"
[(set_attr "type" "shift,shift")
(set_attr "mode" "SI")])
+;; Expand left rotate to right rotate.
+(define_expand "rotl<mode>3"
+ [(set (match_dup 3)
+ (neg:SI (match_operand:SI 2 "register_operand")))
+ (set (match_operand:GPR 0 "register_operand")
+ (rotatert:GPR (match_operand:GPR 1 "register_operand")
+ (match_dup 3)))]
+ ""
+ {
+ operands[3] = gen_reg_rtx (SImode);
+ });
+
;; The following templates were added to generate "bstrpick.d + alsl.d"
;; instruction pairs.
;; It is required that the values of const_immalsl_operand and
diff --git a/gcc/config/loongarch/simd.md b/gcc/config/loongarch/simd.md
index 13202f79bee..a42e20eb8fc 100644
--- a/gcc/config/loongarch/simd.md
+++ b/gcc/config/loongarch/simd.md
@@ -268,6 +268,35 @@ (define_insn "vrotr<mode>3"
[(set_attr "type" "simd_int_arith")
(set_attr "mode" "<MODE>")])
+;; Expand left rotate to right rotate.
+(define_expand "vrotl<mode>3"
+ [(set (match_dup 3)
+ (neg:IVEC (match_operand:IVEC 2 "register_operand")))
+ (set (match_operand:IVEC 0 "register_operand")
+ (rotatert:IVEC (match_operand:IVEC 1 "register_operand")
+ (match_dup 3)))]
+ ""
+ {
+ operands[3] = gen_reg_rtx (<MODE>mode);
+ });
+
+;; Expand left rotate with a scalar amount to right rotate: negate the
+;; scalar before broadcasting it because scalar negation is cheaper than
+;; vector negation.
+(define_expand "rotl<mode>3"
+ [(set (match_dup 3)
+ (neg:SI (match_operand:SI 2 "register_operand")))
+ (set (match_dup 4)
+ (vec_duplicate:IVEC (match_dup 3)))
+ (set (match_operand:IVEC 0 "register_operand")
+ (rotatert:IVEC (match_operand:IVEC 1 "register_operand")
+ (match_dup 4)))]
+ ""
+ {
+ operands[3] = gen_reg_rtx (SImode);
+ operands[4] = gen_reg_rtx (<MODE>mode);
+ });
+
;; <x>vrotri.{b/h/w/d}
(define_insn "rotr<mode>3"
diff --git a/gcc/testsuite/gcc.target/loongarch/rotl-with-rotr.c b/gcc/testsuite/gcc.target/loongarch/rotl-with-rotr.c
new file mode 100644
index 00000000000..84cc53cecaf
--- /dev/null
+++ b/gcc/testsuite/gcc.target/loongarch/rotl-with-rotr.c
@@ -0,0 +1,9 @@
+/* { dg-do compile } */
+/* { dg-options "-O2" } */
+/* { dg-final { scan-assembler "rotr\\.w" } } */
+
+unsigned
+t (unsigned a, unsigned b)
+{
+ return a << b | a >> (32 - b);
+}
diff --git a/gcc/testsuite/gcc.target/loongarch/rotl-with-vrotr.c b/gcc/testsuite/gcc.target/loongarch/rotl-with-vrotr.c
new file mode 100644
index 00000000000..3ebf7e3c083
--- /dev/null
+++ b/gcc/testsuite/gcc.target/loongarch/rotl-with-vrotr.c
@@ -0,0 +1,24 @@
+/* { dg-do compile } */
+/* { dg-options "-O2 -mlsx -fno-vect-cost-model" } */
+/* { dg-final { scan-assembler-times "vrotr\\.w" 2 } } */
+/* { dg-final { scan-assembler-times "vneg\\.w" 1 } } */
+
+#ifndef VLEN
+#define VLEN 16
+#endif
+
+typedef unsigned int V __attribute__((vector_size(VLEN)));
+V a, b, c;
+
+void
+test (int x)
+{
+ b = a << x | a >> (32 - x);
+}
+
+void
+test2 (void)
+{
+ for (int i = 0; i < VLEN / sizeof (int); i++)
+ c[i] = a[i] << b[i] | a[i] >> (32 - b[i]);
+}
diff --git a/gcc/testsuite/gcc.target/loongarch/rotl-with-xvrotr.c b/gcc/testsuite/gcc.target/loongarch/rotl-with-xvrotr.c
new file mode 100644
index 00000000000..833e041b2e2
--- /dev/null
+++ b/gcc/testsuite/gcc.target/loongarch/rotl-with-xvrotr.c
@@ -0,0 +1,7 @@
+/* { dg-do compile } */
+/* { dg-options "-O2 -mlasx -fno-vect-cost-model" } */
+/* { dg-final { scan-assembler-times "xvrotr\\.w" 2 } } */
+/* { dg-final { scan-assembler-times "xvneg\\.w" 1 } } */
+
+#define VLEN 32
+#include "rotl-with-vrotr.c"
--
2.43.0
^ permalink raw reply [flat|nested] 5+ messages in thread* Re: [PATCH] LoongArch: Expand left rotate to right rotate with negated amount
2023-12-18 13:43 [PATCH] LoongArch: Expand left rotate to right rotate with negated amount Xi Ruoyao
@ 2023-12-23 7:00 ` chenglulu
2023-12-23 16:56 ` Xi Ruoyao
0 siblings, 1 reply; 5+ messages in thread
From: chenglulu @ 2023-12-23 7:00 UTC (permalink / raw)
To: Xi Ruoyao, gcc-patches; +Cc: i, xuchenghua, c
[-- Attachment #1: Type: text/plain, Size: 5573 bytes --]
Hi,
This patch will cause the following tests to fail: +FAIL:
gcc.dg/vect/pr97081-2.c (internal compiler error: in extract_insn, at
recog.cc:2812) +FAIL: gcc.dg/vect/pr97081-2.c (test for excess errors)
+FAIL: gcc.dg/vect/pr97081-2.c -flto -ffat-lto-objects (internal
compiler error: in extract_insn, at recog.cc:2812) +FAIL:
gcc.dg/vect/pr97081-2.c -flto -ffat-lto-objects (test for excess errors)
在 2023/12/18 下午9:43, Xi Ruoyao 写道:
> gcc/ChangeLog:
>
> * config/loongarch/loongarch.md (rotl<mode>3):
> New define_expand.
> * config/loongarch/simd.md (vrotl<mode>3): Likewise.
> (rotl<mode>3): Likewise.
>
> gcc/testsuite/ChangeLog:
>
> * gcc.target/loongarch/rotl-with-rotr.c: New test.
> * gcc.target/loongarch/rotl-with-vrotr.c: New test.
> * gcc.target/loongarch/rotl-with-xvrotr.c: New test.
> ---
>
> Bootstrapped and regtested on loongarch64-linux-gnu. Ok for trunk?
>
> gcc/config/loongarch/loongarch.md | 12 ++++++++
> gcc/config/loongarch/simd.md | 29 +++++++++++++++++++
> .../gcc.target/loongarch/rotl-with-rotr.c | 9 ++++++
> .../gcc.target/loongarch/rotl-with-vrotr.c | 24 +++++++++++++++
> .../gcc.target/loongarch/rotl-with-xvrotr.c | 7 +++++
> 5 files changed, 81 insertions(+)
> create mode 100644 gcc/testsuite/gcc.target/loongarch/rotl-with-rotr.c
> create mode 100644 gcc/testsuite/gcc.target/loongarch/rotl-with-vrotr.c
> create mode 100644 gcc/testsuite/gcc.target/loongarch/rotl-with-xvrotr.c
>
> diff --git a/gcc/config/loongarch/loongarch.md b/gcc/config/loongarch/loongarch.md
> index 30025bf1908..939432b83e0 100644
> --- a/gcc/config/loongarch/loongarch.md
> +++ b/gcc/config/loongarch/loongarch.md
> @@ -2903,6 +2903,18 @@ (define_insn "rotrsi3_extend"
> [(set_attr "type" "shift,shift")
> (set_attr "mode" "SI")])
>
> +;; Expand left rotate to right rotate.
> +(define_expand "rotl<mode>3"
> + [(set (match_dup 3)
> + (neg:SI (match_operand:SI 2 "register_operand")))
> + (set (match_operand:GPR 0 "register_operand")
> + (rotatert:GPR (match_operand:GPR 1 "register_operand")
> + (match_dup 3)))]
> + ""
> + {
> + operands[3] = gen_reg_rtx (SImode);
> + });
> +
> ;; The following templates were added to generate "bstrpick.d + alsl.d"
> ;; instruction pairs.
> ;; It is required that the values of const_immalsl_operand and
> diff --git a/gcc/config/loongarch/simd.md b/gcc/config/loongarch/simd.md
> index 13202f79bee..a42e20eb8fc 100644
> --- a/gcc/config/loongarch/simd.md
> +++ b/gcc/config/loongarch/simd.md
> @@ -268,6 +268,35 @@ (define_insn "vrotr<mode>3"
> [(set_attr "type" "simd_int_arith")
> (set_attr "mode" "<MODE>")])
>
> +;; Expand left rotate to right rotate.
> +(define_expand "vrotl<mode>3"
> + [(set (match_dup 3)
> + (neg:IVEC (match_operand:IVEC 2 "register_operand")))
> + (set (match_operand:IVEC 0 "register_operand")
> + (rotatert:IVEC (match_operand:IVEC 1 "register_operand")
> + (match_dup 3)))]
> + ""
> + {
> + operands[3] = gen_reg_rtx (<MODE>mode);
> + });
> +
> +;; Expand left rotate with a scalar amount to right rotate: negate the
> +;; scalar before broadcasting it because scalar negation is cheaper than
> +;; vector negation.
> +(define_expand "rotl<mode>3"
> + [(set (match_dup 3)
> + (neg:SI (match_operand:SI 2 "register_operand")))
> + (set (match_dup 4)
> + (vec_duplicate:IVEC (match_dup 3)))
> + (set (match_operand:IVEC 0 "register_operand")
> + (rotatert:IVEC (match_operand:IVEC 1 "register_operand")
> + (match_dup 4)))]
> + ""
> + {
> + operands[3] = gen_reg_rtx (SImode);
> + operands[4] = gen_reg_rtx (<MODE>mode);
> + });
> +
> ;; <x>vrotri.{b/h/w/d}
>
> (define_insn "rotr<mode>3"
> diff --git a/gcc/testsuite/gcc.target/loongarch/rotl-with-rotr.c b/gcc/testsuite/gcc.target/loongarch/rotl-with-rotr.c
> new file mode 100644
> index 00000000000..84cc53cecaf
> --- /dev/null
> +++ b/gcc/testsuite/gcc.target/loongarch/rotl-with-rotr.c
> @@ -0,0 +1,9 @@
> +/* { dg-do compile } */
> +/* { dg-options "-O2" } */
> +/* { dg-final { scan-assembler "rotr\\.w" } } */
> +
> +unsigned
> +t (unsigned a, unsigned b)
> +{
> + return a << b | a >> (32 - b);
> +}
> diff --git a/gcc/testsuite/gcc.target/loongarch/rotl-with-vrotr.c b/gcc/testsuite/gcc.target/loongarch/rotl-with-vrotr.c
> new file mode 100644
> index 00000000000..3ebf7e3c083
> --- /dev/null
> +++ b/gcc/testsuite/gcc.target/loongarch/rotl-with-vrotr.c
> @@ -0,0 +1,24 @@
> +/* { dg-do compile } */
> +/* { dg-options "-O2 -mlsx -fno-vect-cost-model" } */
> +/* { dg-final { scan-assembler-times "vrotr\\.w" 2 } } */
> +/* { dg-final { scan-assembler-times "vneg\\.w" 1 } } */
> +
> +#ifndef VLEN
> +#define VLEN 16
> +#endif
> +
> +typedef unsigned int V __attribute__((vector_size(VLEN)));
> +V a, b, c;
> +
> +void
> +test (int x)
> +{
> + b = a << x | a >> (32 - x);
> +}
> +
> +void
> +test2 (void)
> +{
> + for (int i = 0; i < VLEN / sizeof (int); i++)
> + c[i] = a[i] << b[i] | a[i] >> (32 - b[i]);
> +}
> diff --git a/gcc/testsuite/gcc.target/loongarch/rotl-with-xvrotr.c b/gcc/testsuite/gcc.target/loongarch/rotl-with-xvrotr.c
> new file mode 100644
> index 00000000000..833e041b2e2
> --- /dev/null
> +++ b/gcc/testsuite/gcc.target/loongarch/rotl-with-xvrotr.c
> @@ -0,0 +1,7 @@
> +/* { dg-do compile } */
> +/* { dg-options "-O2 -mlasx -fno-vect-cost-model" } */
> +/* { dg-final { scan-assembler-times "xvrotr\\.w" 2 } } */
> +/* { dg-final { scan-assembler-times "xvneg\\.w" 1 } } */
> +
> +#define VLEN 32
> +#include "rotl-with-vrotr.c"
^ permalink raw reply [flat|nested] 5+ messages in thread* Re: [PATCH] LoongArch: Expand left rotate to right rotate with negated amount
2023-12-23 7:00 ` chenglulu
@ 2023-12-23 16:56 ` Xi Ruoyao
2023-12-23 17:04 ` Xi Ruoyao
0 siblings, 1 reply; 5+ messages in thread
From: Xi Ruoyao @ 2023-12-23 16:56 UTC (permalink / raw)
To: chenglulu, gcc-patches; +Cc: i, xuchenghua, c
On Sat, 2023-12-23 at 15:00 +0800, chenglulu wrote:
> Hi,
>
> This patch will cause the following tests to fail:
>
> +FAIL: gcc.dg/vect/pr97081-2.c (internal compiler error: in extract_insn, at recog.cc:2812)
> +FAIL: gcc.dg/vect/pr97081-2.c (test for excess errors)
> +FAIL: gcc.dg/vect/pr97081-2.c -flto -ffat-lto-objects (internal compiler error: in extract_insn, at recog.cc:2812)
> +FAIL: gcc.dg/vect/pr97081-2.c -flto -ffat-lto-objects (test for excess errors)
I can reproduce it now but it did not happen when I submitted the patch.
The difference may be caused by a different binutils version or some
other changes in GCC. I'll figure it out...
--
Xi Ruoyao <xry111@xry111.site>
School of Aerospace Science and Technology, Xidian University
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH] LoongArch: Expand left rotate to right rotate with negated amount
2023-12-23 16:56 ` Xi Ruoyao
@ 2023-12-23 17:04 ` Xi Ruoyao
2023-12-24 12:40 ` Xi Ruoyao
0 siblings, 1 reply; 5+ messages in thread
From: Xi Ruoyao @ 2023-12-23 17:04 UTC (permalink / raw)
To: chenglulu, gcc-patches; +Cc: i, xuchenghua, c
On Sun, 2023-12-24 at 00:56 +0800, Xi Ruoyao wrote:
> On Sat, 2023-12-23 at 15:00 +0800, chenglulu wrote:
> > Hi,
> >
> > This patch will cause the following tests to fail:
> >
> > +FAIL: gcc.dg/vect/pr97081-2.c (internal compiler error: in extract_insn, at recog.cc:2812)
> > +FAIL: gcc.dg/vect/pr97081-2.c (test for excess errors)
> > +FAIL: gcc.dg/vect/pr97081-2.c -flto -ffat-lto-objects (internal compiler error: in extract_insn, at recog.cc:2812)
> > +FAIL: gcc.dg/vect/pr97081-2.c -flto -ffat-lto-objects (test for excess errors)
>
> I can reproduce it now but it did not happen when I submitted the patch.
> The difference may be caused by a different binutils version or some
> other changes in GCC. I'll figure it out...
Phew, it was simple. I uploaded an earlier draft version of this patch
onto the dev box :(.
--
Xi Ruoyao <xry111@xry111.site>
School of Aerospace Science and Technology, Xidian University
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH] LoongArch: Expand left rotate to right rotate with negated amount
2023-12-23 17:04 ` Xi Ruoyao
@ 2023-12-24 12:40 ` Xi Ruoyao
0 siblings, 0 replies; 5+ messages in thread
From: Xi Ruoyao @ 2023-12-24 12:40 UTC (permalink / raw)
To: chenglulu, gcc-patches; +Cc: i, xuchenghua, c
On Sun, 2023-12-24 at 01:04 +0800, Xi Ruoyao wrote:
> On Sun, 2023-12-24 at 00:56 +0800, Xi Ruoyao wrote:
> > On Sat, 2023-12-23 at 15:00 +0800, chenglulu wrote:
> > > Hi,
> > >
> > > This patch will cause the following tests to fail:
> > >
> > > +FAIL: gcc.dg/vect/pr97081-2.c (internal compiler error: in extract_insn, at recog.cc:2812)
> > > +FAIL: gcc.dg/vect/pr97081-2.c (test for excess errors)
> > > +FAIL: gcc.dg/vect/pr97081-2.c -flto -ffat-lto-objects (internal compiler error: in extract_insn, at recog.cc:2812)
> > > +FAIL: gcc.dg/vect/pr97081-2.c -flto -ffat-lto-objects (test for excess errors)
> >
> > I can reproduce it now but it did not happen when I submitted the patch.
> > The difference may be caused by a different binutils version or some
> > other changes in GCC. I'll figure it out...
>
> Phew, it was simple. I uploaded an earlier draft version of this patch
> onto the dev box :(.
Fixed the issue in v2.
--
Xi Ruoyao <xry111@xry111.site>
School of Aerospace Science and Technology, Xidian University
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2023-12-24 12:40 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2023-12-18 13:43 [PATCH] LoongArch: Expand left rotate to right rotate with negated amount Xi Ruoyao
2023-12-23 7:00 ` chenglulu
2023-12-23 16:56 ` Xi Ruoyao
2023-12-23 17:04 ` Xi Ruoyao
2023-12-24 12:40 ` Xi Ruoyao
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).