* [PATCH 1/1] sparc: support for -mmisalign in the SPARC M8
[not found] <SPARC_MISALIGN_PATCH>
@ 2017-08-02 15:28 ` qinzhao
2017-08-02 16:43 ` David Miller
0 siblings, 1 reply; 9+ messages in thread
From: qinzhao @ 2017-08-02 15:28 UTC (permalink / raw)
To: gcc-patches
This patch adds support to GCC for the misaligned load/store
instructions introduced in the Oracle SPARC Architecture 2017 and
implemented by the SPARC M8 processor.
A new command line option -mmisaligned is added, that activates the
usage of the new instructions.
The SPARC backend is modified to use the misaligned load/store
instructions when loading/storing data from/to addresses that are
known to be misaligned at compile time (such as in packed structs).
New tests are added to check that the proper instructions are used
when loading and storing from/to packed structs.
The GCC manual is expanded to cover the new command-line option.
gcc/ChangeLog:
* config/sparc/constraints.md: New constraint B for memory
references whose addresses are misaligned.
* config/sparc/m8.md: New insn reservation for misaligned
load/store.
* config/sparc/sparc-protos.h (memory_is_misaligned): New.
* config/sparc/sparc.c (dump_target_flag_bits): Dump
MASK_MISALIGN.
(sparc_option_override): Honour MASK_MISALIGN, use command-line
option explicitly specified target_flags to control
target_flags.
(RTX_OK_FOR_OFFSET_P): For TARGET_MISALIGN treat 10-bits as
legal IMM.
(sparc_legitimate_address_p): Prohibit LO_SUM+IMM for
TARGET_MISALIGN.
(memory_is_misaligned): New
* config/sparc/sparc.h (STRICT_ALIGNMENT): Set to
!(TARGET_MISALIGN)
* config/sparc/sparc.md (cpu_feature): Add new feature misalign
(enabled): Handle misalign.
(type): New insn type load_mis, store_mis, fpload_mis,
fpstore_mis.
("*movhi_insn"): Add new alternatives for misaligned memory
accesses to use M8 misaligned load/store insns,update
corresponding attributes.
("*movsi_insn"): Likewise.
("*movdi_insn_sp32"): Likewise.
("*movdi_insn_sp64"): Likewise.
("*movsf_insn"): Likewise.
("*movdf_insn_sp32"): Likewise.
("*movdf_insn_sp64"): Likewise.
("*mov<VM32:mode>_insn"): Likewise.
("*mov<VM64:mode>_insn_sp64"): Likewise.
("*mov<VM64:mode>_insn_sp32"): Likewise.
(define_split): DI "memory_operand" from "const_zero_operand"
disable splitting for TARGET_MISALIGN.
(define_split): DF "memory_operand" from "const_zero_operand"
Likewise.
(define_split): VM64 "memory_operand" from "const_zero_operand"
Likewise.
* config/sparc/sparc.opt (mmisalign): New option.
* doc/invoke.texi (Option Summary): Document -mmisalign and
-mno-misalign.
(SPARC Optons): Likewise.
gcc/testsuite/ChangeLog:
* gcc.target/sparc/misalign-1.c: New test for misaligned ld/st.
* gcc.target/sparc/misalign-2.c: Likewise.
* gcc.target/sparc/misalign-3.c: Likewise.
* gcc.target/sparc/misalign-4.c: Likewise.
* gcc.target/sparc/misalign-5.c: Likewise.
* gcc.target/sparc/misalign-run-1.c: Likewise.
* gcc.target/sparc/misalign-run-2.c: Likewise.
* gcc.target/sparc/misalign-run-3.c: Likewise.
* lib/target-supports.exp (check_effective_target_misalign_hw):
New procedure.
---
gcc/config/sparc/constraints.md | 12 ++-
gcc/config/sparc/m8.md | 16 +-
gcc/config/sparc/sparc-protos.h | 1 +
gcc/config/sparc/sparc.c | 60 +++++++-
gcc/config/sparc/sparc.h | 5 +-
gcc/config/sparc/sparc.md | 183 +++++++++++++++--------
gcc/config/sparc/sparc.opt | 4 +
gcc/doc/invoke.texi | 10 ++
gcc/testsuite/gcc.target/sparc/misalign-1.c | 45 ++++++
gcc/testsuite/gcc.target/sparc/misalign-2.c | 23 +++
gcc/testsuite/gcc.target/sparc/misalign-3.c | 42 +++++
gcc/testsuite/gcc.target/sparc/misalign-4.c | 23 +++
gcc/testsuite/gcc.target/sparc/misalign-5.c | 19 +++
gcc/testsuite/gcc.target/sparc/misalign-run-1.c | 34 ++++
gcc/testsuite/gcc.target/sparc/misalign-run-2.c | 23 +++
gcc/testsuite/gcc.target/sparc/misalign-run-3.c | 53 +++++++
gcc/testsuite/lib/target-supports.exp | 15 ++
17 files changed, 485 insertions(+), 83 deletions(-)
create mode 100644 gcc/testsuite/gcc.target/sparc/misalign-1.c
create mode 100644 gcc/testsuite/gcc.target/sparc/misalign-2.c
create mode 100644 gcc/testsuite/gcc.target/sparc/misalign-3.c
create mode 100644 gcc/testsuite/gcc.target/sparc/misalign-4.c
create mode 100644 gcc/testsuite/gcc.target/sparc/misalign-5.c
create mode 100644 gcc/testsuite/gcc.target/sparc/misalign-run-1.c
create mode 100644 gcc/testsuite/gcc.target/sparc/misalign-run-2.c
create mode 100644 gcc/testsuite/gcc.target/sparc/misalign-run-3.c
diff --git a/gcc/config/sparc/constraints.md b/gcc/config/sparc/constraints.md
index cff5a61..ba15233 100644
--- a/gcc/config/sparc/constraints.md
+++ b/gcc/config/sparc/constraints.md
@@ -18,7 +18,6 @@
;; <http://www.gnu.org/licenses/>.
;;; Unused letters:
-;;; B
;;; a jkl uv xyz
@@ -201,6 +200,17 @@
"A memory with only a base register"
(match_operand 0 "mem_noofs_operand"))
+;; We need a special memory constraint for the misaligned memory access
+;; This is only for TARGET_MISALIGN target
+;; However, due to a bug in the current special_memory_constraint handling
+;; in lra-constraints.c, we have to define this special_memory_constraint
+;; as a regular constraint as a workaround.
+(define_constraint "B"
+ "Memory reference whose address is misaligned"
+ (and (match_code "mem")
+ (match_test "TARGET_MISALIGN")
+ (match_test "memory_is_misaligned (op, mode)")))
+
(define_constraint "Y"
"The vector zero constant"
(and (match_code "const_vector")
diff --git a/gcc/config/sparc/m8.md b/gcc/config/sparc/m8.md
index f0fe1b2..9542f01 100644
--- a/gcc/config/sparc/m8.md
+++ b/gcc/config/sparc/m8.md
@@ -125,10 +125,10 @@
(eq_attr "subtype" "regular"))))
"m8_slot0, nothing*2")
-;; (define_insn_reservation "m8_load_misalign" 11
-;; (and (eq_attr "cpu" "m8")
-;; (eq_attr "type" "load_mis,fpload_mis"))
-;; "m8_slot0, nothing*10")
+(define_insn_reservation "m8_load_misalign" 11
+ (and (eq_attr "cpu" "m8")
+ (eq_attr "type" "load_mis,fpload_mis"))
+ "m8_slot0, nothing*10")
(define_insn_reservation "m8_prefetch" 1
(and (eq_attr "cpu" "m8")
@@ -147,10 +147,10 @@
(eq_attr "type" "store,fpstore"))
"m8_slot1")
-;; (define_insn_reservation "m8_store_misalign" 3
-;; (and (eq_attr "cpu" "m8")
-;; (eq_attr "type" "store_mis,fpstore_mis"))
-;; "m8_slot1, nothing*2")
+(define_insn_reservation "m8_store_misalign" 3
+ (and (eq_attr "cpu" "m8")
+ (eq_attr "type" "store_mis,fpstore_mis"))
+ "m8_slot1, nothing*2")
;; Control-transfer instructions execute in the Branch Unit in the
;; slot1.
diff --git a/gcc/config/sparc/sparc-protos.h b/gcc/config/sparc/sparc-protos.h
index d453c1a..9003586 100644
--- a/gcc/config/sparc/sparc-protos.h
+++ b/gcc/config/sparc/sparc-protos.h
@@ -100,6 +100,7 @@ extern int mem_min_alignment (rtx, int);
extern int pic_address_needs_scratch (rtx);
extern int register_ok_for_ldd (rtx);
extern int memory_ok_for_ldd (rtx);
+extern int memory_is_misaligned (rtx, machine_mode);
extern int v9_regcmp_p (enum rtx_code);
/* Function used for V8+ code generation. Returns 1 if the high
32 bits of REG are 0 before INSN. */
diff --git a/gcc/config/sparc/sparc.c b/gcc/config/sparc/sparc.c
index 59761aa..455ebf5 100644
--- a/gcc/config/sparc/sparc.c
+++ b/gcc/config/sparc/sparc.c
@@ -1342,6 +1342,8 @@ dump_target_flag_bits (const int flags)
fprintf (stderr, "V8 ");
if (flags & MASK_V9)
fprintf (stderr, "V9 ");
+ if (flags & MASK_MISALIGN)
+ fprintf (stderr, "MISALIGN ");
}
static void
@@ -1449,10 +1451,14 @@ sparc_option_override (void)
MASK_V9|MASK_POPC|MASK_VIS4|MASK_FMAF|MASK_CBCOND|MASK_SUBXC },
/* UltraSPARC M8 */
{ "m8", MASK_ISA,
- MASK_V9|MASK_POPC|MASK_VIS4|MASK_FMAF|MASK_CBCOND|MASK_SUBXC|MASK_VIS4B }
+ MASK_V9|MASK_POPC|MASK_VIS4|MASK_FMAF|MASK_CBCOND|MASK_SUBXC
+ |MASK_VIS4B|MASK_MISALIGN }
};
const struct cpu_table *cpu;
unsigned int i;
+ unsigned int target_flags_explicit_init;
+ unsigned int target_flags_explicit_enable;
+ unsigned int target_flags_explicit_disable;
if (sparc_debug_string != NULL)
{
@@ -1493,10 +1499,16 @@ sparc_option_override (void)
if (TARGET_FPU && !(target_flags_explicit & MASK_FSMULD))
target_flags |= MASK_FSMULD;
+ target_flags_explicit_init = target_flags & target_flags_explicit;
+ target_flags_explicit_enable = target_flags_explicit_init & target_flags_explicit;
+ target_flags_explicit_disable = ~target_flags_explicit_init & target_flags_explicit;
if (TARGET_DEBUG_OPTIONS)
{
dump_target_flags("Initial target_flags", target_flags);
dump_target_flags("target_flags_explicit", target_flags_explicit);
+ dump_target_flags("target_flags_explicit_init", target_flags_explicit_init);
+ dump_target_flags("target_flags_explicit_enable", target_flags_explicit_enable);
+ dump_target_flags("target_flags_explicit_disable", target_flags_explicit_disable);
}
#ifdef SUBTARGET_OVERRIDE_OPTIONS
@@ -1572,8 +1584,8 @@ sparc_option_override (void)
dump_target_flags ("cpu->enable", cpu->enable);
}
- target_flags &= ~cpu->disable;
- target_flags |= (cpu->enable
+ target_flags &= ~(cpu->disable & ~target_flags_explicit_enable);
+ target_flags |= (cpu->enable & ~target_flags_explicit_disable
#ifndef HAVE_AS_FMAF_HPC_VIS3
& ~(MASK_FMAF | MASK_VIS3)
#endif
@@ -1584,7 +1596,7 @@ sparc_option_override (void)
& ~(MASK_VIS4 | MASK_SUBXC)
#endif
#ifndef HAVE_AS_SPARC6
- & ~(MASK_VIS4B)
+ & ~(MASK_VIS4B | MASK_MISALIGN)
#endif
#ifndef HAVE_AS_LEON
& ~(MASK_LEON | MASK_LEON3)
@@ -4099,10 +4111,30 @@ legitimate_pic_operand_p (rtx x)
return true;
}
-#define RTX_OK_FOR_OFFSET_P(X, MODE) \
- (CONST_INT_P (X) \
- && INTVAL (X) >= -0x1000 \
- && INTVAL (X) <= (0x1000 - GET_MODE_SIZE (MODE)))
+/* for misaligned ld/st provided by M8, the IMM field is 10-bit wide
+ other than the 13-bit for regular ld/st.
+ The best solution for this problem is to distinguish each ld/st
+ whether it's aligned or misaligned. However, due to the current
+ design of the common routine TARGET_LEGITIMATE_ADDRESS_P, only
+ the ADDR of a ld/st is passed to the routine, the align info
+ carried by the corresponding MEM is NOT passed in. without changing
+ the prototype of TARGET_LEGITIMATE_ADDRESS_P, we cannot use this
+ best solution.
+ as a workaround, we have to conservatively treat ALL IMM field of
+ a ld/st insn on a MISALIGNED target is 10-bit wide.
+ the side-effect of this workaround is: there will be additional
+ REG<-IMM insn generated for regular ld/st when -mmisalign is ON.
+ However, such additional reload insns should be very easily to be
+ removed by a set of optimization whenever -O specified.
+*/
+#define RTX_OK_FOR_OFFSET_P(X, MODE) \
+ (CONST_INT_P (X) \
+ && ((!TARGET_MISALIGN \
+ && INTVAL (X) >= -0x1000 \
+ && INTVAL (X) <= (0x1000 - GET_MODE_SIZE (MODE)))\
+ || (TARGET_MISALIGN \
+ && INTVAL (X) >= -0x0400 \
+ && INTVAL (X) <= (0x0400 - GET_MODE_SIZE (MODE)))))
#define RTX_OK_FOR_OLO10_P(X, MODE) \
(CONST_INT_P (X) \
@@ -4179,10 +4211,12 @@ sparc_legitimate_address_p (machine_mode mode, rtx addr, bool strict)
&& (mode == DFmode || mode == DImode))
return 0;
}
+ /* We prohibit LO_SUM + IMM on TARGET_MISALIGN since it is not supported */
else if (USE_AS_OFFSETABLE_LO10
&& GET_CODE (rs1) == LO_SUM
&& TARGET_ARCH64
&& ! TARGET_CM_MEDMID
+ && ! TARGET_MISALIGN
&& RTX_OK_FOR_OLO10_P (rs2, mode))
{
rs2 = NULL;
@@ -8910,6 +8944,16 @@ memory_ok_for_ldd (rtx op)
return 1;
}
+
+/* Return 1 if OP, a MEM, has an address which is know to be
+ misaligned */
+
+int
+memory_is_misaligned (rtx op, machine_mode mode)
+{
+ return (MEM_ALIGN (op) < GET_MODE_BITSIZE (mode));
+}
+
\f
/* Implement TARGET_PRINT_OPERAND_PUNCT_VALID_P. */
diff --git a/gcc/config/sparc/sparc.h b/gcc/config/sparc/sparc.h
index 15a6217..5425d01 100644
--- a/gcc/config/sparc/sparc.h
+++ b/gcc/config/sparc/sparc.h
@@ -595,8 +595,9 @@ extern enum cmodel sparc_cmodel;
#define LOCAL_ALIGNMENT(TYPE, ALIGN) DATA_ALIGNMENT (TYPE, ALIGN)
/* Set this nonzero if move instructions will actually fail to work
- when given unaligned data. */
-#define STRICT_ALIGNMENT 1
+ when given unaligned data.
+ when TARGET_MISALIGN, this should be zero */
+#define STRICT_ALIGNMENT !(TARGET_MISALIGN)
/* Things that must be doubleword aligned cannot go in the text section,
because the linker fails to align the text section enough!
diff --git a/gcc/config/sparc/sparc.md b/gcc/config/sparc/sparc.md
index 925b49e..44cad42 100644
--- a/gcc/config/sparc/sparc.md
+++ b/gcc/config/sparc/sparc.md
@@ -258,7 +258,7 @@
(symbol_ref "TARGET_SPARCLET") (const_string "sparclet")]
(const_string "v7"))))
-(define_attr "cpu_feature" "none,fpu,fpunotv9,v9,vis,vis3,vis4,vis4b"
+(define_attr "cpu_feature" "none,fpu,fpunotv9,v9,vis,vis3,vis4,vis4b,misalign"
(const_string "none"))
(define_attr "lra" "disabled,enabled"
@@ -273,7 +273,8 @@
(eq_attr "cpu_feature" "vis") (symbol_ref "TARGET_VIS")
(eq_attr "cpu_feature" "vis3") (symbol_ref "TARGET_VIS3")
(eq_attr "cpu_feature" "vis4") (symbol_ref "TARGET_VIS4")
- (eq_attr "cpu_feature" "vis4b") (symbol_ref "TARGET_VIS4B")]
+ (eq_attr "cpu_feature" "vis4b") (symbol_ref "TARGET_VIS4B")
+ (eq_attr "cpu_feature" "misalign") (symbol_ref "TARGET_MISALIGN")]
(const_int 0)))
;; The SPARC instructions used by the backend are organized into a
@@ -302,8 +303,12 @@
;; load/prefetch: PREFETCH
;; fpload: LDF LDDF LDQF
;; sload: LD{SB,SH,SW}
+;; load_mis: LDM{SH,UH,SW,UW,X}[A]
+;; fpload_mis: LDMF{S,D}[A]
;; store: ST{B,H,W,X} STFSR
;; fpstore: STF STDF STQF
+;; store_mis: STM{H,W,X}[A]
+;; fpstore_mis: STMF{S,D}[A]
;; cbcond: CWB{NE,E,G,LE,GE,L,GU,LEU,CC,CS,POS,NEG,VC,VS}
;; CXB{NE,E,G,LE,GE,L,GU,LEU,CC,CS,POS,NEG,VC,VS}
;; uncond_branch: BA BPA JMPL
@@ -361,10 +366,12 @@
(define_attr "type"
"ialu,compare,shift,
load,sload,store,
+ load_mis,store_mis,
uncond_branch,branch,call,sibcall,call_no_delay_slot,return,
cbcond,uncond_cbcond,
imul,idiv,
fpload,fpstore,
+ fpload_mis,fpstore_mis,
fp,fpmove,
fpcmove,fpcrmove,
fpcmp,
@@ -1621,18 +1628,21 @@
})
(define_insn "*movhi_insn"
- [(set (match_operand:HI 0 "nonimmediate_operand" "=r,r,r,m")
- (match_operand:HI 1 "input_operand" "rI,K,m,rJ"))]
+ [(set (match_operand:HI 0 "nonimmediate_operand" "=r,r,r,r, B,m")
+ (match_operand:HI 1 "input_operand" "rI,K,B,m,rJ,rJ"))]
"(register_operand (operands[0], HImode)
|| register_or_zero_operand (operands[1], HImode))"
"@
mov\t%1, %0
sethi\t%%hi(%a1), %0
+ ldmuh\t%1, %0
lduh\t%1, %0
+ stmh\t%r1, %0
sth\t%r1, %0"
- [(set_attr "type" "*,*,load,store")
- (set_attr "subtype" "*,*,regular,*")
- (set_attr "us3load_type" "*,*,3cycle,*")])
+ [(set_attr "type" "*,*,load_mis,load,store_mis,store")
+ (set_attr "subtype" "*,*,*,regular,*,*")
+ (set_attr "cpu_feature" "*,*,misalign,*,misalign,*")
+ (set_attr "us3load_type" "*,*,*,3cycle,*,*")])
;; We always work with constants here.
(define_insn "*movhi_lo_sum"
@@ -1652,25 +1662,31 @@
})
(define_insn "*movsi_insn"
- [(set (match_operand:SI 0 "nonimmediate_operand" "=r,r,r, m, r,*f,*f,*f, m,d,d")
- (match_operand:SI 1 "input_operand" "rI,K,m,rJ,*f, r, f, m,*f,J,P"))]
+ [(set (match_operand:SI 0 "nonimmediate_operand" "=r,r,r,r, B, m, r,*f,*f,*f,*f, B, m,d,d")
+ (match_operand:SI 1 "input_operand" "rI,K,B,m,rJ,rJ,*f, r, f, B, m,*f,*f,J,P"))]
+
"register_operand (operands[0], SImode)
|| register_or_zero_or_all_ones_operand (operands[1], SImode)"
"@
mov\t%1, %0
sethi\t%%hi(%a1), %0
+ ldmsw\t%1, %0
ld\t%1, %0
+ stmw\t%r1, %0
st\t%r1, %0
movstouw\t%1, %0
movwtos\t%1, %0
fmovs\t%1, %0
+ ldmfs\t%1, %0
ld\t%1, %0
+ stmfs\t%1, %0
st\t%1, %0
fzeros\t%0
fones\t%0"
- [(set_attr "type" "*,*,load,store,vismv,vismv,fpmove,fpload,fpstore,visl,visl")
- (set_attr "subtype" "*,*,regular,*,movstouw,single,*,*,*,single,single")
- (set_attr "cpu_feature" "*,*,*,*,vis3,vis3,*,*,*,vis,vis")])
+ [(set_attr "type" "*,*,load_mis,load,store_mis,store,vismv,vismv,fpmove,fpload_mis,fpload,fpstore_mis,fpstore,visl,visl")
+ (set_attr "subtype" "*,*,*,regular,*,*,*,*,*,*,*,*,*,*,*")
+ (set_attr "cpu_feature" "*,*,misalign,*,misalign,*,vis3,vis3,*,misalign,*,misalign,*,vis,vis")])
+
(define_insn "*movsi_lo_sum"
[(set (match_operand:SI 0 "register_operand" "=r")
@@ -1810,13 +1826,15 @@
(define_insn "*movdi_insn_sp32"
[(set (match_operand:DI 0 "nonimmediate_operand"
- "=T,o,U,T,r,o,r,r,?*f,?T,?*f,?o,?*e,?*e, r,?*f,?*e,?T,*b,*b")
+ "=B,T,o,U,T,r,o,r,r,?*f,?T,?*f,?o,?*e,?*e, r,?*f,?*e,?T,*b,*b")
(match_operand:DI 1 "input_operand"
- " J,J,T,U,o,r,i,r, T,*f, o,*f, *e, *e,?*f, r, T,*e, J, P"))]
+ " J,J,J,T,U,o,r,i,r, T,*f, o,*f, *e, *e,?*f, r, T,*e, J, P"))]
+
"TARGET_ARCH32
&& (register_operand (operands[0], DImode)
|| register_or_zero_operand (operands[1], DImode))"
"@
+ stmx\t%r1, %0
stx\t%r1, %0
#
ldd\t%1, %0
@@ -1837,24 +1855,26 @@
std\t%1, %0
fzero\t%0
fone\t%0"
- [(set_attr "type" "store,*,load,store,load,store,*,*,fpload,fpstore,*,*,fpmove,*,*,*,fpload,fpstore,visl,
-visl")
- (set_attr "subtype" "*,*,regular,*,regular,*,*,*,*,*,*,*,*,*,*,*,*,*,double,double")
- (set_attr "length" "*,2,*,*,*,*,2,2,*,*,2,2,*,2,2,2,*,*,*,*")
- (set_attr "fptype" "*,*,*,*,*,*,*,*,*,*,*,*,double,*,*,*,*,*,double,double")
- (set_attr "cpu_feature" "v9,*,*,*,*,*,*,*,fpu,fpu,fpu,fpu,v9,fpunotv9,vis3,vis3,fpu,fpu,vis,vis")
- (set_attr "lra" "*,*,disabled,disabled,*,*,*,*,*,*,*,*,*,*,*,*,*,*,*,*")])
+ [(set_attr "type" "store_mis,store,*,load,store,load,store,*,*,fpload,fpstore,*,*,fpmove,*,*,*,fpload,fpstore,visl,visl")
+ (set_attr "subtype" "*,*,*,*,regular,*,*,*,regular,*,*,*,*,*,*,*,*,*,*,*,*")
+ (set_attr "length" "*,*,2,*,*,*,*,2,2,*,*,2,2,*,2,2,2,*,*,*,*")
+ (set_attr "fptype" "*,*,*,*,*,*,*,*,*,*,*,*,*,double,*,*,*,*,*,double,double")
+ (set_attr "cpu_feature" "misalign,*,*,*,*,*,*,*,*,fpu,fpu,fpu,fpu,v9,fpunotv9,vis3,vis3,fpu,fpu,vis,vis")
+ (set_attr "lra" "*,*,*,disabled,disabled,*,*,*,*,*,*,*,*,*,*,*,*,*,*,*,*")])
+
(define_insn "*movdi_insn_sp64"
- [(set (match_operand:DI 0 "nonimmediate_operand" "=r,r,r, m, r,*e,?*e,?*e,?W,b,b")
- (match_operand:DI 1 "input_operand" "rI,N,m,rJ,*e, r, *e, W,*e,J,P"))]
+ [(set (match_operand:DI 0 "nonimmediate_operand" "=r,r,r,r, B, m, r,*e,?*e,?*e,?W,b,b")
+ (match_operand:DI 1 "input_operand" "rI,N,B,m,rJ,rJ,*e, r, *e, W,*e,J,P"))]
"TARGET_ARCH64
&& (register_operand (operands[0], DImode)
|| register_or_zero_or_all_ones_operand (operands[1], DImode))"
"@
mov\t%1, %0
sethi\t%%hi(%a1), %0
+ ldmx\t%1, %0
ldx\t%1, %0
+ stmx\t%r1, %0
stx\t%r1, %0
movdtox\t%1, %0
movxtod\t%1, %0
@@ -1863,10 +1883,11 @@ visl")
std\t%1, %0
fzero\t%0
fone\t%0"
- [(set_attr "type" "*,*,load,store,vismv,vismv,fpmove,fpload,fpstore,visl,visl")
- (set_attr "subtype" "*,*,regular,*,movdtox,movxtod,*,*,*,double,double")
- (set_attr "fptype" "*,*,*,*,*,*,double,*,*,double,double")
- (set_attr "cpu_feature" "*,*,*,*,vis3,vis3,*,*,*,vis,vis")])
+ [(set_attr "type" "*,*,load_mis,load,store_mis,store,vismv,vismv,fpmove,fpload,fpstore,visl,visl")
+ (set_attr "subtype" "*,*,*,regular,*,*,movdtox,movxtod,*,*,*,*,*")
+ (set_attr "fptype" "*,*,*,*,*,*,*,*,double,*,*,double,double")
+ (set_attr "cpu_feature" "*,*,misalign,*,misalign,*,vis3,vis3,*,*,*,vis,vis")])
+
(define_expand "movdi_pic_label_ref"
[(set (match_dup 3) (high:DI
@@ -2170,6 +2191,7 @@ visl")
"reload_completed
&& (!TARGET_V9
|| (TARGET_ARCH32
+ && !TARGET_MISALIGN
&& !mem_min_alignment (operands[0], 8)))
&& offsettable_memref_p (operands[0])"
[(clobber (const_int 0))]
@@ -2350,8 +2372,9 @@ visl")
})
(define_insn "*movsf_insn"
- [(set (match_operand:SF 0 "nonimmediate_operand" "=d,d,f, *r,*r,*r,*r, f,f,*r,m, m")
- (match_operand:SF 1 "input_operand" "G,C,f,*rR, Q, S, f,*r,m, m,f,*rG"))]
+ [(set (match_operand:SF 0 "nonimmediate_operand" "=d,d,f, *r,*r,*r,*r, f,f,f,*r,*r,B,m, B, m")
+ (match_operand:SF 1 "input_operand" "G,C,f,*rR, Q, S, f,*r,B,m, B, m,f,f,*rG,*rG"))]
+
"(register_operand (operands[0], SFmode)
|| register_or_zero_or_all_ones_operand (operands[1], SFmode))"
{
@@ -2385,18 +2408,29 @@ visl")
case 7:
return "movwtos\t%1, %0";
case 8:
+ return "ldmfs\t%1, %0";
case 9:
return "ld\t%1, %0";
case 10:
+ return "ldmsw\t%1, %0";
case 11:
+ return "ld\t%1, %0";
+ case 12:
+ return "stmfs\t%r1, %0";
+ case 13:
return "st\t%r1, %0";
+ case 14:
+ return "stm\t%r1, %0";
+ case 15:
+ return "st\t%r1, %0";
default:
gcc_unreachable ();
}
}
- [(set_attr "type" "visl,visl,fpmove,*,*,*,vismv,vismv,fpload,load,fpstore,store")
- (set_attr "subtype" "single,single,*,*,*,*,movstouw,single,*,regular,*,*")
- (set_attr "cpu_feature" "vis,vis,fpu,*,*,*,vis3,vis3,fpu,*,fpu,*")])
+ [(set_attr "type" "visl,visl,fpmove,*,*,*,vismv,vismv,fpload_mis,fpload,load_mis,load,fpstore_mis,fpstore,store_mis,store")
+ (set_attr "subtype" "single,single,*,*,*,*,movstouw,single,*,*,*,regular,*,*,*,*")
+ (set_attr "cpu_feature" "vis,vis,fpu,*,*,*,vis3,vis3,misalign,fpu,misalign,*,misalign,fpu,misalign,*")])
+
;; The following 3 patterns build SFmode constants in integer registers.
@@ -2443,13 +2477,14 @@ visl")
(define_insn "*movdf_insn_sp32"
[(set (match_operand:DF 0 "nonimmediate_operand"
- "=T,o,b,b,e,e,*r, f, e,T,U,T, f,o, *r,*r, o")
+ "=B,T,o,b,b,e,e,*r, f, e,T,U,T, f,o, *r,*r, o")
(match_operand:DF 1 "input_operand"
- " G,G,G,C,e,e, f,*r,T#F,e,T,U,o#F,f,*rF, o,*r"))]
+ " G,G,G,G,C,e,e, f,*r,T#F,e,T,U,o#F,f,*rF, o,*r"))]
"TARGET_ARCH32
&& (register_operand (operands[0], DFmode)
|| register_or_zero_or_all_ones_operand (operands[1], DFmode))"
"@
+ stmx\t%r1, %0
stx\t%r1, %0
#
fzero\t%0
@@ -2467,16 +2502,17 @@ visl")
#
ldd\t%1, %0
std\t%1, %0"
- [(set_attr "type" "store,*,visl,visl,fpmove,*,*,*,fpload,fpstore,load,store,*,*,*,load,store")
- (set_attr "subtype" "*,*,double,double,*,*,*,*,*,*,regular,*,*,*,*,regular,*")
- (set_attr "length" "*,2,*,*,*,2,2,2,*,*,*,*,2,2,2,*,*")
- (set_attr "fptype" "*,*,double,double,double,*,*,*,*,*,*,*,*,*,*,*,*")
- (set_attr "cpu_feature" "v9,*,vis,vis,v9,fpunotv9,vis3,vis3,fpu,fpu,*,*,fpu,fpu,*,*,*")
- (set_attr "lra" "*,*,*,*,*,*,*,*,*,*,disabled,disabled,*,*,*,*,*")])
+ [(set_attr "type" "store_mis,store,*,visl,visl,fpmove,*,*,*,fpload,fpstore,load,store,*,*,*,load,store")
+ (set_attr "subtype" "*,*,*,double,double,*,*,*,*,*,*,regular,*,*,*,*,regular,*")
+ (set_attr "length" "*,*,2,*,*,*,2,2,2,*,*,*,*,2,2,2,*,*")
+ (set_attr "fptype" "*,*,*,double,double,double,*,*,*,*,*,*,*,*,*,*,*,*")
+ (set_attr "cpu_feature" "misalign,v9,*,vis,vis,v9,fpunotv9,vis3,vis3,fpu,fpu,*,*,fpu,fpu,*,*,*")
+ (set_attr "lra" "*,*,*,*,*,*,*,*,*,*,*,disabled,disabled,*,*,*,*,*")])
+
(define_insn "*movdf_insn_sp64"
- [(set (match_operand:DF 0 "nonimmediate_operand" "=b,b,e,*r, e, e,W, *r,*r, m,*r")
- (match_operand:DF 1 "input_operand" "G,C,e, e,*r,W#F,e,*rG, m,*rG, F"))]
+ [(set (match_operand:DF 0 "nonimmediate_operand" "=b,b,e,*r, e,e, e,B,W, *r,*r, m,*r")
+ (match_operand:DF 1 "input_operand" " G,C,e, e,*r,B,W#F,e,e,*rG, m,*rG, F"))]
"TARGET_ARCH64
&& (register_operand (operands[0], DFmode)
|| register_or_zero_or_all_ones_operand (operands[1], DFmode))"
@@ -2486,17 +2522,19 @@ visl")
fmovd\t%1, %0
movdtox\t%1, %0
movxtod\t%1, %0
+ ldmfd\t%1, %0
ldd\t%1, %0
+ stmfd\t%1, %0
std\t%1, %0
mov\t%r1, %0
ldx\t%1, %0
stx\t%r1, %0
#"
- [(set_attr "type" "visl,visl,fpmove,vismv,vismv,load,store,*,load,store,*")
- (set_attr "subtype" "double,double,*,movdtox,movxtod,regular,*,*,regular,*,*")
- (set_attr "length" "*,*,*,*,*,*,*,*,*,*,2")
- (set_attr "fptype" "double,double,double,double,double,*,*,*,*,*,*")
- (set_attr "cpu_feature" "vis,vis,fpu,vis3,vis3,fpu,fpu,*,*,*,*")])
+ [(set_attr "type" "visl,visl,fpmove,vismv,vismv,fpload_mis,fpload,fpstore_mis,fpstore,*,load,store,*")
+ (set_attr "subtype" "double,double,*,movdtox,movxtod,*,regular,*,*,*,regular,*,*")
+ (set_attr "length" "*,*,*,*,*,*,*,*,*,*,*,*,2")
+ (set_attr "fptype" "double,double,double,double,double,*,*,*,*,*,*,*,*")
+ (set_attr "cpu_feature" "vis,vis,fpu,vis3,vis3,misalign,fpu,misalign,fpu,*,*,*,*")])
;; This pattern builds DFmode constants in integer registers.
(define_split
@@ -2603,6 +2641,7 @@ visl")
"reload_completed
&& (!TARGET_V9
|| (TARGET_ARCH32
+ && !TARGET_MISALIGN
&& !mem_min_alignment (operands[0], 8)))
&& offsettable_memref_p (operands[0])"
[(clobber (const_int 0))]
@@ -8634,8 +8673,8 @@ visl")
})
(define_insn "*mov<VM32:mode>_insn"
- [(set (match_operand:VM32 0 "nonimmediate_operand" "=f,f,f,f,m,m,*r, m,*r,*r, f")
- (match_operand:VM32 1 "input_operand" "Y,Z,f,m,f,Y, m,*r,*r, f,*r"))]
+ [(set (match_operand:VM32 0 "nonimmediate_operand" "=f,f,f,f,f,B,m,B,m,*r,*r, B, m,*r,*r, f")
+ (match_operand:VM32 1 "input_operand" "Y,Z,f,B,m,f,f,Y,Y, B, m,*r,*r,*r, f,*r"))]
"TARGET_VIS
&& (register_operand (operands[0], <VM32:MODE>mode)
|| register_or_zero_or_all_ones_operand (operands[1], <VM32:MODE>mode))"
@@ -8643,21 +8682,27 @@ visl")
fzeros\t%0
fones\t%0
fsrc2s\t%1, %0
+ ldmfs\t%1, %0
ld\t%1, %0
+ stmfs\t%1, %0
st\t%1, %0
+ stmw\t%r1, %0
st\t%r1, %0
+ ldmsw\t%1, %0
ld\t%1, %0
+ stmw\t%1, %0
st\t%1, %0
mov\t%1, %0
movstouw\t%1, %0
movwtos\t%1, %0"
- [(set_attr "type" "visl,visl,vismv,fpload,fpstore,store,load,store,*,vismv,vismv")
- (set_attr "subtype" "single,single,single,*,*,*,regular,*,*,movstouw,single")
- (set_attr "cpu_feature" "vis,vis,vis,*,*,*,*,*,*,vis3,vis3")])
+ [(set_attr "type" "visl,visl,vismv,fpload_mis,fpload,fpstore_mis,fpstore,store_mis,store,load_mis,load,store_mis,store,*,vismv,vismv")
+ (set_attr "subtype" "single,single,single,*,*,*,*,*,*,*,regular,*,*,*,movstouw,single")
+ (set_attr "cpu_feature" "vis,vis,vis,misalign,*,misalign,*,misalign,*,misalign,*,misalign,*,*,vis3,vis3")])
+
(define_insn "*mov<VM64:mode>_insn_sp64"
- [(set (match_operand:VM64 0 "nonimmediate_operand" "=e,e,e,e,W,m,*r, m,*r, e,*r")
- (match_operand:VM64 1 "input_operand" "Y,Z,e,W,e,Y, m,*r, e,*r,*r"))]
+ [(set (match_operand:VM64 0 "nonimmediate_operand" "=e,e,e,e,e,B,W,B,m,*r,*r, B, m,*r, e,*r")
+ (match_operand:VM64 1 "input_operand" "Y,Z,e,B,W,e,e,Y,Y, B, m,*r,*r, e,*r,*r"))]
"TARGET_VIS
&& TARGET_ARCH64
&& (register_operand (operands[0], <VM64:MODE>mode)
@@ -8666,28 +8711,36 @@ visl")
fzero\t%0
fone\t%0
fsrc2\t%1, %0
+ ldmfd\t%1, %0
ldd\t%1, %0
+ stmfd\t%1, %0
std\t%1, %0
+ stmx\t%r1, %0
stx\t%r1, %0
+ ldmx\t%1, %0
ldx\t%1, %0
+ stmx\t%1, %0
stx\t%1, %0
movdtox\t%1, %0
movxtod\t%1, %0
mov\t%1, %0"
- [(set_attr "type" "visl,visl,vismv,fpload,fpstore,store,load,store,vismv,vismv,*")
- (set_attr "subtype" "double,double,double,*,*,*,regular,*,movdtox,movxtod,*")
- (set_attr "cpu_feature" "vis,vis,vis,*,*,*,*,*,vis3,vis3,*")])
+ [(set_attr "type" "visl,visl,vismv,fpload_mis,fpload,fpstore_mis,fpstore,store_mis,store,load_mis,load,store_mis,store,vismv,vismv,*")
+ (set_attr "subtype" "double,double,double,*,*,*,*,*,*,*,regular,*,*,movdtox,movxtod,*")
+ (set_attr "cpu_feature" "vis,vis,vis,misalign,*,misalign,*,misalign,*,misalign,*,misalign,*,vis3,vis3,*")])
+
+
(define_insn "*mov<VM64:mode>_insn_sp32"
[(set (match_operand:VM64 0 "nonimmediate_operand"
- "=T,o,e,e,e,*r, f,e,T,U,T,f,o,*r,*r, o")
+ "=B,T,o,e,e,e,*r, f,e,T,U,T,f,o,*r,*r, o")
(match_operand:VM64 1 "input_operand"
- " Y,Y,Y,Z,e, f,*r,T,e,T,U,o,f,*r, o,*r"))]
+ " Y,Y,Y,Y,Z,e, f,*r,T,e,T,U,o,f,*r, o,*r"))]
"TARGET_VIS
&& TARGET_ARCH32
&& (register_operand (operands[0], <VM64:MODE>mode)
|| register_or_zero_or_all_ones_operand (operands[1], <VM64:MODE>mode))"
"@
+ stmx\t%r1, %0
stx\t%r1, %0
#
fzero\t%0
@@ -8704,11 +8757,12 @@ visl")
#
ldd\t%1, %0
std\t%1, %0"
- [(set_attr "type" "store,*,visl,visl,vismv,*,*,fpload,fpstore,load,store,*,*,*,load,store")
- (set_attr "subtype" "*,*,double,double,double,*,*,*,*,regular,*,*,*,*,regular,*")
- (set_attr "length" "*,2,*,*,*,2,2,*,*,*,*,2,2,2,*,*")
- (set_attr "cpu_feature" "*,*,vis,vis,vis,vis3,vis3,*,*,*,*,*,*,*,*,*")
- (set_attr "lra" "*,*,*,*,*,*,*,*,*,disabled,disabled,*,*,*,*,*")])
+ [(set_attr "type" "store_mis,store,*,visl,visl,vismv,*,*,fpload,fpstore,load,store,*,*,*,load,store")
+ (set_attr "subtype" "*,*,*,double,double,double,*,*,*,*,regular,*,*,*,*,regular,*")
+ (set_attr "length" "*,*,2,*,*,*,2,2,*,*,*,*,2,2,2,*,*")
+ (set_attr "cpu_feature" "misalign,*,*,vis,vis,vis,vis3,vis3,*,*,*,*,*,*,*,*,*")
+ (set_attr "lra" "*,*,*,*,*,*,*,*,*,*,disabled,disabled,*,*,*,*,*")])
+
(define_split
[(set (match_operand:VM64 0 "register_operand" "")
@@ -8755,6 +8809,7 @@ visl")
"reload_completed
&& TARGET_VIS
&& TARGET_ARCH32
+ && !TARGET_MISALIGN
&& !mem_min_alignment (operands[0], 8)
&& offsettable_memref_p (operands[0])"
[(clobber (const_int 0))]
diff --git a/gcc/config/sparc/sparc.opt b/gcc/config/sparc/sparc.opt
index 22267f5..3b86576 100644
--- a/gcc/config/sparc/sparc.opt
+++ b/gcc/config/sparc/sparc.opt
@@ -85,6 +85,10 @@ mvis4b
Target Report Mask(VIS4B)
Use additional VIS instructions introduced in OSA2017.
+mmisalign
+Target Report Mask(MISALIGN)
+Use OSA2017 misaligned load and store instructions.
+
mcbcond
Target Report Mask(CBCOND)
Use UltraSPARC Compare-and-Branch extensions.
diff --git a/gcc/doc/invoke.texi b/gcc/doc/invoke.texi
index 5ae9dc4..525218c 100644
--- a/gcc/doc/invoke.texi
+++ b/gcc/doc/invoke.texi
@@ -1123,6 +1123,7 @@ See RS/6000 and PowerPC Options.
-mv8plus -mno-v8plus -mvis -mno-vis @gol
-mvis2 -mno-vis2 -mvis3 -mno-vis3 @gol
-mvis4 -mno-vis4 -mvis4b -mno-vis4b @gol
+-mmisalign -mno-misalign @gol
-mcbcond -mno-cbcond -mfmaf -mno-fmaf -mfsmuld -mno-fsmuld @gol
-mpopc -mno-popc -msubxc -mno-subxc @gol
-mfix-at697f -mfix-ut699 -mfix-ut700 -mfix-gr712rc @gol
@@ -24045,6 +24046,15 @@ cpu that supports such instructions, such as m8 and later. Setting
@option{-mvis4b} also sets @option{-mvis4}, @option{-mvis3},
@option{-mvis2} and @option{-mvis}.
+@item -mmisalign
+@itemx -mno-misalign
+@opindex mmisalign
+@opindex mno-misalign
+With @option{-mmisalign}, GCC generates code that takes advantage of
+the misaligned load and store instructions introduced in the Oracle
+SPARC Architecture 2017. The default is @option{-mmisalign} when
+targeting a cpu that supports such instructions, such as m8 and later.
+
@item -mcbcond
@itemx -mno-cbcond
@opindex mcbcond
diff --git a/gcc/testsuite/gcc.target/sparc/misalign-1.c b/gcc/testsuite/gcc.target/sparc/misalign-1.c
new file mode 100644
index 0000000..764905f
--- /dev/null
+++ b/gcc/testsuite/gcc.target/sparc/misalign-1.c
@@ -0,0 +1,45 @@
+/* { dg-do compile } */
+/* { dg-options "-mmisalign" } */
+
+typedef struct __attribute__((packed)) {
+ char old;
+ short ip;
+ int new;
+ long long ll;
+ float fp;
+ double dp;
+} NCO;
+
+NCO a;
+short eip;
+int enew;
+long long ell;
+float efp;
+double edp;
+
+int main(void) {
+
+ a.old = 'c';
+ a.ip = 10;
+ a.new = 20;
+ a.ll = 50;
+ a.fp = 30.0;
+ a.dp = 40.0;
+ eip = a.ip;
+ enew = a.new;
+ ell = a.ll;
+ efp = a.fp;
+ edp = a.dp;
+ return 0;
+}
+
+/* { dg-final { scan-assembler "stmh" } } */
+/* { dg-final { scan-assembler "stmw" } } */
+/* { dg-final { scan-assembler "stmx" } } */
+/* { dg-final { scan-assembler "stmfs" } } */
+/* { dg-final { scan-assembler "stmfd" } } */
+/* { dg-final { scan-assembler "ldmuh" } } */
+/* { dg-final { scan-assembler "ldmsw" } } */
+/* { dg-final { scan-assembler "ldmx" } } */
+/* { dg-final { scan-assembler "ldmfs" } } */
+/* { dg-final { scan-assembler "ldmfd" } } */
diff --git a/gcc/testsuite/gcc.target/sparc/misalign-2.c b/gcc/testsuite/gcc.target/sparc/misalign-2.c
new file mode 100644
index 0000000..d94959d
--- /dev/null
+++ b/gcc/testsuite/gcc.target/sparc/misalign-2.c
@@ -0,0 +1,23 @@
+/* this is to verify that the store of constant zero to misaligned memory address of type
+ * long long or double use stmx insns on m8 and -m32 */
+
+/* { dg-do compile } */
+/* { dg-options "-mcpu=m8 -m32" } */
+
+typedef struct __attribute__((packed)) {
+ char old;
+ long long ll;
+ double dp;
+} NCO;
+
+NCO a;
+
+int main(void) {
+
+ a.old = 'c';
+ a.ll = 0;
+ a.dp = 0.0;
+ return 0;
+}
+
+/* { dg-final { scan-assembler-times "stmx" 2 } } */
diff --git a/gcc/testsuite/gcc.target/sparc/misalign-3.c b/gcc/testsuite/gcc.target/sparc/misalign-3.c
new file mode 100644
index 0000000..eac2adb
--- /dev/null
+++ b/gcc/testsuite/gcc.target/sparc/misalign-3.c
@@ -0,0 +1,42 @@
+/* { dg-do compile } */
+/* { dg-options "-mmisalign" } */
+
+typedef int v1si __attribute__ ((vector_size (4),aligned(2)));
+typedef short v2hi __attribute__ ((vector_size (4),aligned(1)));
+
+typedef long long v1di __attribute__ ((vector_size (8),aligned(4)));
+typedef int v2si __attribute__ ((vector_size (8),aligned(2)));
+typedef short v4hi __attribute__ ((vector_size (8),aligned(1)));
+
+v1si a1 = {1};
+v1si b1 = {2};
+v1si c1;
+v2hi a2 = {1,2};
+v2hi b2 = {2,1};
+v2hi c2;
+
+v1di a3 = {1};
+v1di b3 = {2};
+v1di c3;
+v2si a4 = {1,2};
+v2si b4 = {2,1};
+v2si c4;
+v4hi a5 = {1,2,3,4};
+v4hi b5 = {4,3,2,1};
+v4hi c5;
+
+int main()
+{
+ c1 = a1 + b1;
+ c2 = a2 - b2;
+
+ c3 = a3 * b3;
+ c4 = a4 / b4;
+ c5 = a5 == b5;
+
+ return 0;
+}
+
+/* { dg-final { scan-assembler-times "ldm" 10} } */
+/* { dg-final { scan-assembler-times "stm" 5} } */
+
diff --git a/gcc/testsuite/gcc.target/sparc/misalign-4.c b/gcc/testsuite/gcc.target/sparc/misalign-4.c
new file mode 100644
index 0000000..23e9b3e
--- /dev/null
+++ b/gcc/testsuite/gcc.target/sparc/misalign-4.c
@@ -0,0 +1,23 @@
+/* { dg-do compile } */
+/* { dg-options "-mmisalign" } */
+
+/* this test case is added to test the fact that, misaligned ld/st insns does NOT
+ * support REG + IMM address mode, when the IMM is too big to be represented by a
+ * 10 bit signed interger */
+typedef struct __attribute__((packed)) {
+ char old;
+ char pad[1024];
+ long ll;
+} NCO;
+
+NCO a;
+extern long el;
+
+int main(void) {
+
+ a.ll = 0;
+ el = a.ll;
+ return 0;
+}
+
+/* { dg-final { scan-assembler "stmx" } } */
diff --git a/gcc/testsuite/gcc.target/sparc/misalign-5.c b/gcc/testsuite/gcc.target/sparc/misalign-5.c
new file mode 100644
index 0000000..2b9d069
--- /dev/null
+++ b/gcc/testsuite/gcc.target/sparc/misalign-5.c
@@ -0,0 +1,19 @@
+/* { dg-do compile } */
+/* { dg-options "-mmisalign -O1" } */
+
+/* this test case is added to test the fact that, misaligned ld/st insns does NOT
+ * support LOSUM + IMM address mode */
+typedef struct __attribute__((packed)) {
+ char old;
+ long long ll;
+} NCO;
+
+NCO a;
+
+int main(void) {
+
+ a.ll = 0;
+ return 0;
+}
+
+/* { dg-final { scan-assembler "stmx" } } */
diff --git a/gcc/testsuite/gcc.target/sparc/misalign-run-1.c b/gcc/testsuite/gcc.target/sparc/misalign-run-1.c
new file mode 100644
index 0000000..61f007e
--- /dev/null
+++ b/gcc/testsuite/gcc.target/sparc/misalign-run-1.c
@@ -0,0 +1,34 @@
+/* { dg-do run} */
+/* { dg-require-effective-target misalign_hw } */
+/* { dg-options "-mcpu=m8" } */
+
+extern void abort (void);
+
+typedef struct __attribute__((packed)) {
+ char old;
+ short ip;
+ int new;
+ long long ll;
+ float fp;
+ double dp;
+} NCO;
+
+NCO a;
+
+int main(void) {
+
+ a.old = 'c';
+ a.ip = 10;
+ a.new = 20;
+ a.ll = 50;
+ a.fp = 30.0;
+ a.dp = 40.0;
+ if ((a.ip != 10)
+ || (a.new != 20)
+ || (a.ll != 50)
+ || (a.fp != 30.0)
+ || (a.dp != 40.0))
+ abort();
+
+ return 0;
+}
diff --git a/gcc/testsuite/gcc.target/sparc/misalign-run-2.c b/gcc/testsuite/gcc.target/sparc/misalign-run-2.c
new file mode 100644
index 0000000..1679860
--- /dev/null
+++ b/gcc/testsuite/gcc.target/sparc/misalign-run-2.c
@@ -0,0 +1,23 @@
+/* { dg-do run} */
+/* { dg-require-effective-target misalign_hw } */
+/* { dg-options "-mcpu=m8 -m32" } */
+
+extern void abort (void);
+
+typedef struct __attribute__((packed)) {
+ char old;
+ long long ll;
+ double dp;
+} NCO;
+
+NCO a;
+
+int main(void) {
+
+ a.old = 'c';
+ a.ll = 0;
+ a.dp = 0.0;
+ if ((a.ll != 0) || (a.dp != 0.0))
+ abort ();
+ return 0;
+}
diff --git a/gcc/testsuite/gcc.target/sparc/misalign-run-3.c b/gcc/testsuite/gcc.target/sparc/misalign-run-3.c
new file mode 100644
index 0000000..18ba8d2
--- /dev/null
+++ b/gcc/testsuite/gcc.target/sparc/misalign-run-3.c
@@ -0,0 +1,53 @@
+/* { dg-do run} */
+/* { dg-require-effective-target misalign_hw } */
+/* { dg-options "-mmisalign" } */
+
+typedef int v1si __attribute__ ((vector_size (4),aligned(2)));
+typedef short v2hi __attribute__ ((vector_size (4),aligned(1)));
+
+typedef long long v1di __attribute__ ((vector_size (8),aligned(4)));
+typedef int v2si __attribute__ ((vector_size (8),aligned(2)));
+typedef short v4hi __attribute__ ((vector_size (8),aligned(1)));
+
+v1si a1 = {1};
+v1si b1 = {2};
+v1si c1;
+v2hi a2 = {1,2};
+v2hi b2 = {2,1};
+v2hi c2;
+
+v1di a3 = {1};
+v1di b3 = {2};
+v1di c3;
+v2si a4 = {1,2};
+v2si b4 = {2,1};
+v2si c4;
+v4hi a5 = {1,2,3,4};
+v4hi b5 = {4,3,2,1};
+v4hi c5;
+
+extern void abort (void);
+
+int main()
+{
+ c1 = a1 + b1;
+ c2 = a2 - b2;
+
+ c3 = a3 * b3;
+ c4 = a4 / b4;
+ c5 = a5 == b5;
+
+ if ((c1[0] != 3)
+ || (c2[0] != -1)
+ || (c2[1] != 1)
+ || (c3[0] != 2)
+ || (c4[0] != 0)
+ || (c4[1] != 2)
+ || (c5[0] != 0)
+ || (c5[1] != 0)
+ || (c5[2] != 0)
+ || (c5[3] != 0))
+ abort ();
+
+ return 0;
+}
diff --git a/gcc/testsuite/lib/target-supports.exp b/gcc/testsuite/lib/target-supports.exp
index 5a65627..d7fe3a0 100644
--- a/gcc/testsuite/lib/target-supports.exp
+++ b/gcc/testsuite/lib/target-supports.exp
@@ -8292,6 +8292,21 @@ proc check_effective_target_offload_nvptx { } {
} "-foffload=nvptx-none" ]
}
+# Return 1 if the target supports the following misaligned load instruction:
+# ldmx o1, o2
+proc check_effective_target_misalign_hw { } {
+ return [check_runtime misalign_hw {
+ int main (void)
+ {
+ register void *p __asm__ ("o1") = &main;
+ register long res __asm__ ("o2");
+ asm volatile (".word 0xd58a5400");
+ return 0;
+ }
+ } "-mmisalign"]
+}
+
+
# Return 1 if the compiler has been configured with hsa offloading.
proc check_effective_target_offload_hsa { } {
--
1.7.1
^ permalink raw reply [flat|nested] 9+ messages in thread