public inbox for gcc-patches@gcc.gnu.org
 help / color / mirror / Atom feed
* [PATCH] darwin, d: Support outfile substitution for liphobos
@ 2021-11-19  8:32 Iain Buclaw
  2021-11-19  9:21 ` Iain Sandoe
  0 siblings, 1 reply; 6+ messages in thread
From: Iain Buclaw @ 2021-11-19  8:32 UTC (permalink / raw)
  To: gcc-patches; +Cc: iains.gcc, Iain Buclaw

Hi,

This patch fixes a stage2 bootstrap failure in the D front-end on
darwin due to libgphobos being dynamically linked despite
-static-libphobos being on the command line.

In the gdc driver, this takes the previous fix for the Darwin D
bootstrap, and extends it to the -static-libphobos option as well.
Rather than pushing the -static-libphobos option back onto the command
line, the setting of SKIPOPT is instead conditionally removed.  The same
change has been repeated for -static-libstdc++ so there is now no need
to call generate_option to re-add it.

In the gcc driver, -static-libphobos has been added as a common option,
validated, and a new outfile substition added to config/darwin.h to
correctly replace -lgphobos with libgphobos.a.

Bootstrapped and regression tested on x86_64-linux-gnu and
x86_64-apple-darwin20.

OK for mainline?  This would also be fine for gcc-11 release branch too,
as well as earlier releases with D support.

Regards,
Iain.

---
gcc/ChangeLog:

	* common.opt (static-libphobos): Add option.
	* config/darwin.h (LINK_SPEC): Substitute -lgphobos with libgphobos.a
	when linking statically.
	* gcc.c (driver_handle_option): Set -static-libphobos as always valid.

gcc/d/ChangeLog:

	* d-spec.cc (lang_specific_driver): Set SKIPOPT on -static-libstdc++
	and -static-libphobos only when target supports LD_STATIC_DYNAMIC.
	Remove generate_option to re-add -static-libstdc++.
---
 gcc/common.opt      |  4 ++++
 gcc/config/darwin.h |  1 +
 gcc/d/d-spec.cc     | 18 +++++++++++-------
 gcc/gcc.c           |  6 ++++--
 4 files changed, 20 insertions(+), 9 deletions(-)

diff --git a/gcc/common.opt b/gcc/common.opt
index db6010e4e20..73c12d933f3 100644
--- a/gcc/common.opt
+++ b/gcc/common.opt
@@ -3527,6 +3527,10 @@ static-libgfortran
 Driver
 ; Documented for Fortran, but always accepted by driver.
 
+static-libphobos
+Driver
+; Documented for D, but always accepted by driver.
+
 static-libstdc++
 Driver
 
diff --git a/gcc/config/darwin.h b/gcc/config/darwin.h
index 7ed01efa694..c4ddd623e8b 100644
--- a/gcc/config/darwin.h
+++ b/gcc/config/darwin.h
@@ -443,6 +443,7 @@ extern GTY(()) int darwin_ms_struct;
                      %:replace-outfile(-lobjc libobjc-gnu.a%s); \
                     :%:replace-outfile(-lobjc -lobjc-gnu )}}\
    %{static|static-libgcc|static-libgfortran:%:replace-outfile(-lgfortran libgfortran.a%s)}\
+   %{static|static-libgcc|static-libphobos:%:replace-outfile(-lgphobos libgphobos.a%s)}\
    %{static|static-libgcc|static-libstdc++|static-libgfortran:%:replace-outfile(-lgomp libgomp.a%s)}\
    %{static|static-libgcc|static-libstdc++:%:replace-outfile(-lstdc++ libstdc++.a%s)}\
    %{force_cpusubtype_ALL:-arch %(darwin_arch)} \
diff --git a/gcc/d/d-spec.cc b/gcc/d/d-spec.cc
index b12d28f1047..73ecac3bbf1 100644
--- a/gcc/d/d-spec.cc
+++ b/gcc/d/d-spec.cc
@@ -253,13 +253,23 @@ lang_specific_driver (cl_decoded_option **in_decoded_options,
 
 	case OPT_static_libstdc__:
 	  saw_static_libcxx = true;
+#ifndef HAVE_LD_STATIC_DYNAMIC
+	  /* Remove -static-libstdc++ from the command only if target supports
+	     LD_STATIC_DYNAMIC.  When not supported, it is left in so that a
+	     back-end target can use outfile substitution.  */
 	  args[i] |= SKIPOPT;
+#endif
 	  break;
 
 	case OPT_static_libphobos:
 	  if (phobos_library != PHOBOS_NOLINK)
 	    phobos_library = PHOBOS_STATIC;
+#ifndef HAVE_LD_STATIC_DYNAMIC
+	  /* Remove -static-libphobos from the command only if target supports
+	     LD_STATIC_DYNAMIC.  When not supported, it is left in so that a
+	     back-end target can use outfile substitution.  */
 	  args[i] |= SKIPOPT;
+#endif
 	  break;
 
 	case OPT_shared_libphobos:
@@ -460,7 +470,7 @@ lang_specific_driver (cl_decoded_option **in_decoded_options,
 #endif
     }
 
-  if (saw_libcxx || need_stdcxx)
+  if (saw_libcxx || saw_static_libcxx || need_stdcxx)
     {
 #ifdef HAVE_LD_STATIC_DYNAMIC
       if (saw_static_libcxx && !static_link)
@@ -468,12 +478,6 @@ lang_specific_driver (cl_decoded_option **in_decoded_options,
 	  generate_option (OPT_Wl_, LD_STATIC_OPTION, 1, CL_DRIVER,
 			   &new_decoded_options[j++]);
 	}
-#else
-      /* Push the -static-libstdc++ option back onto the command so that
-	 a target without LD_STATIC_DYNAMIC can use outfile substitution.  */
-      if (saw_static_libcxx && !static_link)
-	generate_option (OPT_static_libstdc__, NULL, 1, CL_DRIVER,
-			 &new_decoded_options[j++]);
 #endif
       if (saw_libcxx)
 	new_decoded_options[j++] = *saw_libcxx;
diff --git a/gcc/gcc.c b/gcc/gcc.c
index 506c2acc282..fea6d049183 100644
--- a/gcc/gcc.c
+++ b/gcc/gcc.c
@@ -4576,10 +4576,12 @@ driver_handle_option (struct gcc_options *opts,
     case OPT_static_libgcc:
     case OPT_shared_libgcc:
     case OPT_static_libgfortran:
+    case OPT_static_libphobos:
     case OPT_static_libstdc__:
       /* These are always valid, since gcc.c itself understands the
-	 first two, gfortranspec.c understands -static-libgfortran and
-	 g++spec.c understands -static-libstdc++ */
+	 first two, gfortranspec.c understands -static-libgfortran,
+	 d-spec.cc understands -static-libphobos, and g++spec.c
+	 understands -static-libstdc++ */
       validated = true;
       break;
 
-- 
2.30.2


^ permalink raw reply	[flat|nested] 6+ messages in thread

end of thread, other threads:[~2021-12-01 14:12 UTC | newest]

Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-11-19  8:32 [PATCH] darwin, d: Support outfile substitution for liphobos Iain Buclaw
2021-11-19  9:21 ` Iain Sandoe
2021-11-19  9:57   ` Iain Buclaw
2021-11-26 12:51   ` Iain Buclaw
2021-11-30 17:03     ` [PING, PATCH] " Iain Buclaw
2021-12-01 14:12       ` Richard Biener

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).