* [patch] config.gcc untabification
@ 2003-03-06 21:17 Nathanael Nerode
2003-03-06 21:54 ` Daniel Jacobowitz
2003-03-07 10:09 ` Alexandre Oliva
0 siblings, 2 replies; 16+ messages in thread
From: Nathanael Nerode @ 2003-03-06 21:17 UTC (permalink / raw)
To: gcc-patches
This does something I've wanted to do for a long time: it removes all those
damn leading tabs from config.gcc, replacing them with two-space indents.
I know this generates spurious merge problems, but it's so much less
irritating.
For straightforwardness of evaluation, this doesn't do any other indentation
cleanup (although there is some I'd like to do.)
* config.gcc: Reindent.
Index: config.gcc
===================================================================
RCS file: /cvs/gcc/gcc/gcc/config.gcc,v
retrieving revision 1.288
diff -u -r1.288 config.gcc
--- config.gcc 28 Feb 2003 18:17:33 -0000 1.288
+++ config.gcc 6 Mar 2003 21:14:16 -0000
@@ -250,71 +250,71 @@
cpu_type=`echo $machine | sed 's/-.*$//'`
case $machine in
alpha*-*-*)
- cpu_type=alpha
- need_64bit_hwint=yes
- ;;
+ cpu_type=alpha
+ need_64bit_hwint=yes
+ ;;
strongarm*-*-*)
- cpu_type=arm
- ;;
+ cpu_type=arm
+ ;;
arm*-*-*)
- cpu_type=arm
- ;;
+ cpu_type=arm
+ ;;
ep9312*-*-*)
- cpu_type=arm
- ;;
+ cpu_type=arm
+ ;;
xscale-*-*)
- cpu_type=arm
- ;;
+ cpu_type=arm
+ ;;
i[34567]86-*-*)
- cpu_type=i386
- extra_headers="mmintrin.h xmmintrin.h"
- ;;
+ cpu_type=i386
+ extra_headers="mmintrin.h xmmintrin.h"
+ ;;
x86_64-*-*)
- cpu_type=i386
- extra_headers="mmintrin.h xmmintrin.h"
- need_64bit_hwint=yes
- ;;
+ cpu_type=i386
+ extra_headers="mmintrin.h xmmintrin.h"
+ need_64bit_hwint=yes
+ ;;
ia64-*-*)
- extra_headers=ia64intrin.h
- need_64bit_hwint=yes
- ;;
+ extra_headers=ia64intrin.h
+ need_64bit_hwint=yes
+ ;;
hppa*-*-* | parisc*-*-*)
- cpu_type=pa
- ;;
+ cpu_type=pa
+ ;;
m680[012]0-*-*)
- cpu_type=m68k
- extra_headers=math-68881.h
- ;;
+ cpu_type=m68k
+ extra_headers=math-68881.h
+ ;;
m68k-*-*)
- extra_headers=math-68881.h
- ;;
+ extra_headers=math-68881.h
+ ;;
mips*-*-*)
- cpu_type=mips
- need_64bit_hwint=yes
- ;;
+ cpu_type=mips
+ need_64bit_hwint=yes
+ ;;
powerpc*-*-*)
- cpu_type=rs6000
- extra_headers="ppc-asm.h altivec.h spe.h"
- need_64bit_hwint=yes
- ;;
+ cpu_type=rs6000
+ extra_headers="ppc-asm.h altivec.h spe.h"
+ need_64bit_hwint=yes
+ ;;
rs6000*-*-*)
- need_64bit_hwint=yes
- ;;
+ need_64bit_hwint=yes
+ ;;
sparc64*-*-*)
- cpu_type=sparc
- need_64bit_hwint=yes
- ;;
+ cpu_type=sparc
+ need_64bit_hwint=yes
+ ;;
sparc*-*-*)
- cpu_type=sparc
- ;;
+ cpu_type=sparc
+ ;;
s390*-*-*)
- need_64bit_hwint=yes
- ;;
+ need_64bit_hwint=yes
+ ;;
# Note the 'l'; we need to be able to match e.g. "shle" or "shl".
sh[123456789l]*-*-*)
- cpu_type=sh
- need_64bit_hwint=yes
- ;;
+ cpu_type=sh
+ need_64bit_hwint=yes
+ ;;
tic4x-*-*)
cpu_type=c4x
;;
@@ -323,936 +323,936 @@
tm_file=${cpu_type}/${cpu_type}.h
if test -f ${srcdir}/config/${cpu_type}/${cpu_type}-protos.h
then
- tm_p_file=${cpu_type}/${cpu_type}-protos.h
+ tm_p_file=${cpu_type}/${cpu_type}-protos.h
fi
extra_modes=
if test -f ${srcdir}/config/${cpu_type}/${cpu_type}-modes.def
then
- extra_modes=${cpu_type}/${cpu_type}-modes.def
+ extra_modes=${cpu_type}/${cpu_type}-modes.def
fi
case $machine in
x86_64-*-*)
- tm_file="i386/biarch64.h ${tm_file}"
- ;;
+ tm_file="i386/biarch64.h ${tm_file}"
+ ;;
esac
# On a.out targets, we need to use collect2.
case $machine in
*-*-*aout*)
- use_collect2=yes
- ;;
+ use_collect2=yes
+ ;;
esac
# Common parts for widely ported systems.
case $machine in
*-*-linux*)
- xm_defines=POSIX
- case $machine in
- *-*-linux*ecoff* | *-*-linux*libc1* | *-*-linux*oldld* | *-*-linux*aout*)
- ;;
- *)
- extra_parts="crtbegin.o crtbeginS.o crtbeginT.o crtend.o crtendS.o"
- gas=yes gnu_ld=yes
- case x${enable_threads} in
- x | xyes | xposix) thread_file='posix'
- ;;
- esac
- ;;
- esac
- ;;
+ xm_defines=POSIX
+ case $machine in
+ *-*-linux*ecoff* | *-*-linux*libc1* | *-*-linux*oldld* | *-*-linux*aout*)
+ ;;
+ *)
+ extra_parts="crtbegin.o crtbeginS.o crtbeginT.o crtend.o crtendS.o"
+ gas=yes gnu_ld=yes
+ case x${enable_threads} in
+ x | xyes | xposix) thread_file='posix'
+ ;;
+ esac
+ ;;
+ esac
+ ;;
*-*-gnu*)
- # On the Hurd, the setup is just about the same on
- # each different CPU. The specific machines that we
- # support are matched above and just set $cpu_type.
- xm_defines=POSIX
- tm_file="${cpu_type}/gnu.h"
- extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtbeginT.o"
- # GNU always uses ELF.
- elf=yes
- # GNU tools are the only tools.
- gnu_ld=yes
- gas=yes
- # These details are the same as for Linux.
- # But here we need a little extra magic.
- tmake_file="t-slibgcc-elf-ver t-linux t-gnu"
- case $machine in
- alpha*)
- tm_file="${cpu_type}/${cpu_type}.h alpha/elf.h alpha/linux.h alpha/linux-elf.h gnu.h ${tm_file}"
- ;;
- i[34567]86-*-*)
- tm_file="${cpu_type}/${cpu_type}.h i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h linux.h i386/linux.h gnu.h ${tm_file}"
- ;;
- esac
- ;;
+ # On the Hurd, the setup is just about the same on
+ # each different CPU. The specific machines that we
+ # support are matched above and just set $cpu_type.
+ xm_defines=POSIX
+ tm_file="${cpu_type}/gnu.h"
+ extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtbeginT.o"
+ # GNU always uses ELF.
+ elf=yes
+ # GNU tools are the only tools.
+ gnu_ld=yes
+ gas=yes
+ # These details are the same as for Linux.
+ # But here we need a little extra magic.
+ tmake_file="t-slibgcc-elf-ver t-linux t-gnu"
+ case $machine in
+ alpha*)
+ tm_file="${cpu_type}/${cpu_type}.h alpha/elf.h alpha/linux.h alpha/linux-elf.h gnu.h ${tm_file}"
+ ;;
+ i[34567]86-*-*)
+ tm_file="${cpu_type}/${cpu_type}.h i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h linux.h i386/linux.h gnu.h ${tm_file}"
+ ;;
+ esac
+ ;;
*-*-openbsd*)
- tm_file=${cpu_type}/openbsd.h
- tmake_file="t-libc-ok t-openbsd t-libgcc-pic"
- xm_defines=POSIX
- if test x$enable_threads = xyes; then
- thread_file='posix'
- tmake_file="${tmake_file} t-openbsd-thread"
- fi
- ;;
+ tm_file=${cpu_type}/openbsd.h
+ tmake_file="t-libc-ok t-openbsd t-libgcc-pic"
+ xm_defines=POSIX
+ if test x$enable_threads = xyes; then
+ thread_file='posix'
+ tmake_file="${tmake_file} t-openbsd-thread"
+ fi
+ ;;
*-*-netbsd*)
- tmake_file="t-slibgcc-elf-ver t-libc-ok t-netbsd"
- xm_defines=POSIX
- gas=yes
- gnu_ld=yes
-
- # NetBSD 2.0 and later get POSIX threads enabled by default.
- # Allow them to be explicitly enabled on any other version.
- case x${enable_threads} in
- x)
- case $machine in
- *-*-netbsd[2-9]* | *-*-netbsdelf[2-9]*)
- thread_file='posix'
- tm_defines="${tm_defines} NETBSD_ENABLE_PTHREADS"
- ;;
- esac
- ;;
- xyes | xposix)
- thread_file='posix'
- tm_defines="${tm_defines} NETBSD_ENABLE_PTHREADS"
- ;;
- esac
-
- # NetBSD 1.7 and later are set up to use GCC's crtstuff for
- # ELF configurations. We will clear extra_parts in the
- # a.out configurations.
- case $machine in
- *-*-netbsd*1.[7-9]* | *-*-netbsd[2-9]* | *-*-netbsdelf[2-9]*)
- extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtbeginT.o"
- ;;
- esac
- ;;
+ tmake_file="t-slibgcc-elf-ver t-libc-ok t-netbsd"
+ xm_defines=POSIX
+ gas=yes
+ gnu_ld=yes
+
+ # NetBSD 2.0 and later get POSIX threads enabled by default.
+ # Allow them to be explicitly enabled on any other version.
+ case x${enable_threads} in
+ x)
+ case $machine in
+ *-*-netbsd[2-9]* | *-*-netbsdelf[2-9]*)
+ thread_file='posix'
+ tm_defines="${tm_defines} NETBSD_ENABLE_PTHREADS"
+ ;;
+ esac
+ ;;
+ xyes | xposix)
+ thread_file='posix'
+ tm_defines="${tm_defines} NETBSD_ENABLE_PTHREADS"
+ ;;
+ esac
+
+ # NetBSD 1.7 and later are set up to use GCC's crtstuff for
+ # ELF configurations. We will clear extra_parts in the
+ # a.out configurations.
+ case $machine in
+ *-*-netbsd*1.[7-9]* | *-*-netbsd[2-9]* | *-*-netbsdelf[2-9]*)
+ extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtbeginT.o"
+ ;;
+ esac
+ ;;
*-*-freebsd[12] | *-*-freebsd[12].* | *-*-freebsd*aout*)
- # This is the place-holder for the generic a.out configuration
- # of FreeBSD. No actual configuration resides here since
- # there was only ever a bare-bones ix86 configuration for
- # a.out and it exists solely in the machine-specific section.
- # This place-holder must exist to avoid dropping into
- # the generic ELF configuration of FreeBSD (i.e. it must be
- # ordered before that section).
- ;;
+ # This is the place-holder for the generic a.out configuration
+ # of FreeBSD. No actual configuration resides here since
+ # there was only ever a bare-bones ix86 configuration for
+ # a.out and it exists solely in the machine-specific section.
+ # This place-holder must exist to avoid dropping into
+ # the generic ELF configuration of FreeBSD (i.e. it must be
+ # ordered before that section).
+ ;;
*-*-freebsd*)
- # This is the generic ELF configuration of FreeBSD. Later
- # machine-specific sections may refine and add to this
- # configuration.
- #
- # Due to tm_file entry ordering issues that vary between cpu
- # architectures, we only define fbsd_tm_file to allow the
- # machine-specific section to dictate the final order of all
- # entries of tm_file with the minor exception that components
- # of the tm_file set here will always be of the form:
- #
- # freebsd<version_number>.h [freebsd-<conf_option>.h ...] freebsd-spec.h freebsd.h
- #
- # The machine-specific section should not tamper with this
- # ordering but may order all other entries of tm_file as it
- # pleases around the provided core setting.
- gas=yes
- gnu_ld=yes
- extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o"
- case $machine in
- *-*-freebsd3 | *-*-freebsd[3].*) fbsd_tm_file="freebsd3.h";;
- *-*-freebsd4 | *-*-freebsd[4].*) fbsd_tm_file="freebsd4.h";;
- *-*-freebsd5 | *-*-freebsd[5].*) fbsd_tm_file="freebsd5.h";;
- *-*-freebsd6 | *-*-freebsd[6].*) fbsd_tm_file="freebsd6.h";;
- *) echo 'Please update *-*-freebsd* in gcc/config.gcc'; exit 1;;
- esac
- tmake_file="t-slibgcc-elf-ver t-freebsd"
- xmake_file=none
- xm_defines=POSIX
- case x${enable_threads} in
- xno) fbsd_tm_file="${fbsd_tm_file} freebsd-nthr.h";;
- x | xyes | xpthreads | xposix)
- thread_file='posix'
- tmake_file="${tmake_file} t-freebsd-thread"
- # Before 5.0, FreeBSD can't bind shared libraries to -lc
- # when "optionally" threaded via weak pthread_* checks.
- case $machine in
- *-*-freebsd[34] | *-*-freebsd[34].*)
- tmake_file="${tmake_file} t-slibgcc-nolc-override";;
- esac
- ;;
- *) echo 'Unknown thread configuration for FreeBSD'; exit 1;;
- esac
- fbsd_tm_file="${fbsd_tm_file} freebsd-spec.h freebsd.h"
- ;;
+ # This is the generic ELF configuration of FreeBSD. Later
+ # machine-specific sections may refine and add to this
+ # configuration.
+ #
+ # Due to tm_file entry ordering issues that vary between cpu
+ # architectures, we only define fbsd_tm_file to allow the
+ # machine-specific section to dictate the final order of all
+ # entries of tm_file with the minor exception that components
+ # of the tm_file set here will always be of the form:
+ #
+ # freebsd<version_number>.h [freebsd-<conf_option>.h ...] freebsd-spec.h freebsd.h
+ #
+ # The machine-specific section should not tamper with this
+ # ordering but may order all other entries of tm_file as it
+ # pleases around the provided core setting.
+ gas=yes
+ gnu_ld=yes
+ extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o"
+ case $machine in
+ *-*-freebsd3 | *-*-freebsd[3].*) fbsd_tm_file="freebsd3.h";;
+ *-*-freebsd4 | *-*-freebsd[4].*) fbsd_tm_file="freebsd4.h";;
+ *-*-freebsd5 | *-*-freebsd[5].*) fbsd_tm_file="freebsd5.h";;
+ *-*-freebsd6 | *-*-freebsd[6].*) fbsd_tm_file="freebsd6.h";;
+ *) echo 'Please update *-*-freebsd* in gcc/config.gcc'; exit 1;;
+ esac
+ tmake_file="t-slibgcc-elf-ver t-freebsd"
+ xmake_file=none
+ xm_defines=POSIX
+ case x${enable_threads} in
+ xno) fbsd_tm_file="${fbsd_tm_file} freebsd-nthr.h";;
+ x | xyes | xpthreads | xposix)
+ thread_file='posix'
+ tmake_file="${tmake_file} t-freebsd-thread"
+ # Before 5.0, FreeBSD can't bind shared libraries to -lc
+ # when "optionally" threaded via weak pthread_* checks.
+ case $machine in
+ *-*-freebsd[34] | *-*-freebsd[34].*)
+ tmake_file="${tmake_file} t-slibgcc-nolc-override";;
+ esac
+ ;;
+ *) echo 'Unknown thread configuration for FreeBSD'; exit 1;;
+ esac
+ fbsd_tm_file="${fbsd_tm_file} freebsd-spec.h freebsd.h"
+ ;;
*-*-darwin*)
- tm_file="${tm_file} darwin.h"
- tm_p_file="${tm_p_file} darwin-protos.h"
- tmake_file="t-darwin"
- target_gtfiles="\$(srcdir)/config/darwin.c"
- c_target_objs="darwin-c.o"
- cxx_target_objs="darwin-c.o"
- extra_parts="crt2.o"
- # Darwin linker does collect2 functionality
- use_collect2=no
- extra_objs="darwin.o"
- ;;
+ tm_file="${tm_file} darwin.h"
+ tm_p_file="${tm_p_file} darwin-protos.h"
+ tmake_file="t-darwin"
+ target_gtfiles="\$(srcdir)/config/darwin.c"
+ c_target_objs="darwin-c.o"
+ cxx_target_objs="darwin-c.o"
+ extra_parts="crt2.o"
+ # Darwin linker does collect2 functionality
+ use_collect2=no
+ extra_objs="darwin.o"
+ ;;
*-*-vxworks*)
- tmake_file=t-vxworks
- tm_file="${tm_file} elfos.h svr4.h vxworks.h"
- thread_file='vxworks'
- use_collect2=yes
- xm_defines=POSIX
- ;;
+ tmake_file=t-vxworks
+ tm_file="${tm_file} elfos.h svr4.h vxworks.h"
+ thread_file='vxworks'
+ use_collect2=yes
+ xm_defines=POSIX
+ ;;
esac
case $machine in
# Support site-specific machine types.
*local*)
- rest=`echo $machine | sed -e "s/$cpu_type-//"`
- tm_file=${cpu_type}/$rest.h
- if test -f $srcdir/config/${cpu_type}/xm-$rest.h
- then xm_file=${cpu_type}/xm-$rest.h
- fi
- if test -f $srcdir/config/${cpu_type}/x-$rest
- then xmake_file=${cpu_type}/x-$rest
- fi
- if test -f $srcdir/config/${cpu_type}/t-$rest
- then tmake_file=${cpu_type}/t-$rest
- fi
- ;;
+ rest=`echo $machine | sed -e "s/$cpu_type-//"`
+ tm_file=${cpu_type}/$rest.h
+ if test -f $srcdir/config/${cpu_type}/xm-$rest.h
+ then xm_file=${cpu_type}/xm-$rest.h
+ fi
+ if test -f $srcdir/config/${cpu_type}/x-$rest
+ then xmake_file=${cpu_type}/x-$rest
+ fi
+ if test -f $srcdir/config/${cpu_type}/t-$rest
+ then tmake_file=${cpu_type}/t-$rest
+ fi
+ ;;
alpha*-*-unicosmk*)
- use_collect2=yes
- tm_file="${tm_file} alpha/unicosmk.h"
+ use_collect2=yes
+ tm_file="${tm_file} alpha/unicosmk.h"
- # Don't include t-ieee for now because we don't support that yet
- # tmake_file="alpha/t-ieee"
- tmake_file="alpha/t-unicosmk"
- ;;
+ # Don't include t-ieee for now because we don't support that yet
+ # tmake_file="alpha/t-ieee"
+ tmake_file="alpha/t-unicosmk"
+ ;;
alpha-*-interix)
- tm_file="${tm_file} alpha/alpha32.h interix.h alpha/alpha-interix.h"
+ tm_file="${tm_file} alpha/alpha32.h interix.h alpha/alpha-interix.h"
- # GAS + IEEE_CONFORMANT+IEEE (no inexact);
- #target_cpu_default="MASK_GAS|MASK_IEEE_CONFORMANT|MASK_IEEE"
+ # GAS + IEEE_CONFORMANT+IEEE (no inexact);
+ #target_cpu_default="MASK_GAS|MASK_IEEE_CONFORMANT|MASK_IEEE"
- # GAS + IEEE_CONFORMANT
- target_cpu_default="MASK_GAS|MASK_IEEE_CONFORMANT"
+ # GAS + IEEE_CONFORMANT
+ target_cpu_default="MASK_GAS|MASK_IEEE_CONFORMANT"
- xm_defines=POSIX
- tmake_file="alpha/t-alpha t-interix alpha/t-interix alpha/t-ieee"
- if test x$enable_threads = xyes ; then
- thread_file='posix'
- fi
- if test x$stabs = xyes ; then
- tm_file="${tm_file} dbxcoff.h"
- fi
- #prefix='$$INTERIX_ROOT'/usr/contrib
- #local_prefix='$$INTERIX_ROOT'/usr/contrib
- ;;
+ xm_defines=POSIX
+ tmake_file="alpha/t-alpha t-interix alpha/t-interix alpha/t-ieee"
+ if test x$enable_threads = xyes ; then
+ thread_file='posix'
+ fi
+ if test x$stabs = xyes ; then
+ tm_file="${tm_file} dbxcoff.h"
+ fi
+ #prefix='$$INTERIX_ROOT'/usr/contrib
+ #local_prefix='$$INTERIX_ROOT'/usr/contrib
+ ;;
alpha*-*-linux*ecoff*)
- echo "Configuration $machine no longer supported" 1>&2
- exit 1
- ;;
+ echo "Configuration $machine no longer supported" 1>&2
+ exit 1
+ ;;
alpha*-*-linux*libc1*)
- tm_file="${tm_file} alpha/elf.h alpha/linux.h alpha/linux-elf.h"
- target_cpu_default="MASK_GAS"
- tmake_file="t-slibgcc-elf-ver t-linux t-linux-gnulibc1 alpha/t-alpha alpha/t-crtfm alpha/t-ieee"
- extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtbeginT.o"
- gas=yes gnu_ld=yes
- if test x$enable_threads = xyes; then
- thread_file='posix'
- fi
- ;;
+ tm_file="${tm_file} alpha/elf.h alpha/linux.h alpha/linux-elf.h"
+ target_cpu_default="MASK_GAS"
+ tmake_file="t-slibgcc-elf-ver t-linux t-linux-gnulibc1 alpha/t-alpha alpha/t-crtfm alpha/t-ieee"
+ extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtbeginT.o"
+ gas=yes gnu_ld=yes
+ if test x$enable_threads = xyes; then
+ thread_file='posix'
+ fi
+ ;;
alpha*-*-linux*)
- tm_file="${tm_file} alpha/elf.h alpha/linux.h alpha/linux-elf.h"
- target_cpu_default="MASK_GAS"
- tmake_file="t-slibgcc-elf-ver t-linux alpha/t-crtfm alpha/t-alpha alpha/t-ieee"
- ;;
+ tm_file="${tm_file} alpha/elf.h alpha/linux.h alpha/linux-elf.h"
+ target_cpu_default="MASK_GAS"
+ tmake_file="t-slibgcc-elf-ver t-linux alpha/t-crtfm alpha/t-alpha alpha/t-ieee"
+ ;;
alpha*-*-gnu*)
- target_cpu_default="MASK_GAS"
- tmake_file="${tmake_file} alpha/t-crtfm alpha/t-alpha alpha/t-ieee"
- ;;
+ target_cpu_default="MASK_GAS"
+ tmake_file="${tmake_file} alpha/t-crtfm alpha/t-alpha alpha/t-ieee"
+ ;;
alpha*-*-freebsd*)
- tm_file="${tm_file} ${fbsd_tm_file} alpha/elf.h alpha/freebsd.h"
- target_cpu_default="MASK_GAS"
- tmake_file="${tmake_file} alpha/t-crtfm alpha/t-alpha alpha/t-ieee"
- extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtbeginT.o"
- ;;
+ tm_file="${tm_file} ${fbsd_tm_file} alpha/elf.h alpha/freebsd.h"
+ target_cpu_default="MASK_GAS"
+ tmake_file="${tmake_file} alpha/t-crtfm alpha/t-alpha alpha/t-ieee"
+ extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtbeginT.o"
+ ;;
alpha*-*-netbsd*)
- tm_file="${tm_file} netbsd.h alpha/elf.h netbsd-elf.h alpha/netbsd.h"
- target_cpu_default="MASK_GAS"
- tmake_file="${tmake_file} alpha/t-alpha alpha/t-ieee"
- ;;
+ tm_file="${tm_file} netbsd.h alpha/elf.h netbsd-elf.h alpha/netbsd.h"
+ target_cpu_default="MASK_GAS"
+ tmake_file="${tmake_file} alpha/t-alpha alpha/t-ieee"
+ ;;
alpha*-*-openbsd*)
- tm_file="${cpu_type}/${cpu_type}.h ${tm_file}"
- # default x-alpha is only appropriate for dec-osf.
- target_cpu_default="MASK_GAS"
- tmake_file="alpha/t-alpha alpha/t-ieee"
- ;;
+ tm_file="${cpu_type}/${cpu_type}.h ${tm_file}"
+ # default x-alpha is only appropriate for dec-osf.
+ target_cpu_default="MASK_GAS"
+ tmake_file="alpha/t-alpha alpha/t-ieee"
+ ;;
alpha*-dec-osf[45]*)
- xm_defines=POSIX
- if test x$stabs = xyes
- then
- tm_file="${tm_file} dbx.h"
- fi
- if test x$gas != xyes
- then
- extra_passes="mips-tfile mips-tdump"
- fi
- use_collect2=yes
- tmake_file="alpha/t-alpha alpha/t-ieee alpha/t-crtfm alpha/t-osf4"
- tm_file="${tm_file} alpha/osf.h"
- extra_headers=va_list.h
- case $machine in
- *-*-osf4*)
- # Some versions of OSF4 (specifically X4.0-9 296.7) have
- # a broken tar, so we use cpio instead.
- install_headers_dir=install-headers-cpio
- # Set target_cpu_default except on 4.0a.
- case $machine in
- *-*-osf4.0a) ;;
- *) target_cpu_default=MASK_SUPPORT_ARCH
- esac
- ;;
- *-*-osf5*)
- tm_file="${tm_file} alpha/osf5.h"
- target_cpu_default=MASK_SUPPORT_ARCH
- ;;
- esac
- ;;
+ xm_defines=POSIX
+ if test x$stabs = xyes
+ then
+ tm_file="${tm_file} dbx.h"
+ fi
+ if test x$gas != xyes
+ then
+ extra_passes="mips-tfile mips-tdump"
+ fi
+ use_collect2=yes
+ tmake_file="alpha/t-alpha alpha/t-ieee alpha/t-crtfm alpha/t-osf4"
+ tm_file="${tm_file} alpha/osf.h"
+ extra_headers=va_list.h
+ case $machine in
+ *-*-osf4*)
+ # Some versions of OSF4 (specifically X4.0-9 296.7) have
+ # a broken tar, so we use cpio instead.
+ install_headers_dir=install-headers-cpio
+ # Set target_cpu_default except on 4.0a.
+ case $machine in
+ *-*-osf4.0a) ;;
+ *) target_cpu_default=MASK_SUPPORT_ARCH
+ esac
+ ;;
+ *-*-osf5*)
+ tm_file="${tm_file} alpha/osf5.h"
+ target_cpu_default=MASK_SUPPORT_ARCH
+ ;;
+ esac
+ ;;
alpha64-dec-*vms*)
- xm_defines=POSIX
- tm_file="${tm_file} alpha/vms.h alpha/vms64.h"
- xm_file="alpha/xm-vms.h"
- tmake_file="alpha/t-alpha alpha/t-vms alpha/t-vms64 alpha/t-ieee"
- xmake_file=alpha/x-vms
- exeext=.exe
- # This removes the cpu type and manufacturer components and
- # replaces "." with "_" in the operating system version.
- case $host in *-*-*vms*)
- target_alias=`echo $host \
- | sed 's/.*-.*-\(.*\)$/\1/' | sed 's/\./_/g'`
- ;;
- esac
- install_headers_dir=install-headers-cp
- prefix=/gnu
- local_prefix=/gnu
- ;;
+ xm_defines=POSIX
+ tm_file="${tm_file} alpha/vms.h alpha/vms64.h"
+ xm_file="alpha/xm-vms.h"
+ tmake_file="alpha/t-alpha alpha/t-vms alpha/t-vms64 alpha/t-ieee"
+ xmake_file=alpha/x-vms
+ exeext=.exe
+ # This removes the cpu type and manufacturer components and
+ # replaces "." with "_" in the operating system version.
+ case $host in *-*-*vms*)
+ target_alias=`echo $host \
+ | sed 's/.*-.*-\(.*\)$/\1/' | sed 's/\./_/g'`
+ ;;
+ esac
+ install_headers_dir=install-headers-cp
+ prefix=/gnu
+ local_prefix=/gnu
+ ;;
alpha*-dec-*vms*)
- xm_defines=POSIX
- tm_file="${tm_file} alpha/vms.h"
- xm_file=alpha/xm-vms.h
- tmake_file="alpha/t-alpha alpha/t-vms alpha/t-ieee"
- xmake_file=alpha/x-vms
- exeext=.exe
- # This removes the cpu type and manufacturer components and
- # replaces "." with "_" in the operating system version.
- case $host in *-*-*vms*)
- target_alias=`echo $host \
- | sed 's/.*-.*-\(.*\)$/\1/' | sed 's/\./_/g'`
- ;;
- esac
- install_headers_dir=install-headers-cp
- prefix=/gnu
- local_prefix=/gnu
- ;;
+ xm_defines=POSIX
+ tm_file="${tm_file} alpha/vms.h"
+ xm_file=alpha/xm-vms.h
+ tmake_file="alpha/t-alpha alpha/t-vms alpha/t-ieee"
+ xmake_file=alpha/x-vms
+ exeext=.exe
+ # This removes the cpu type and manufacturer components and
+ # replaces "." with "_" in the operating system version.
+ case $host in *-*-*vms*)
+ target_alias=`echo $host \
+ | sed 's/.*-.*-\(.*\)$/\1/' | sed 's/\./_/g'`
+ ;;
+ esac
+ install_headers_dir=install-headers-cp
+ prefix=/gnu
+ local_prefix=/gnu
+ ;;
arc-*-elf*)
- tm_file="dbxelf.h elfos.h svr4.h ${tm_file}"
- extra_parts="crtinit.o crtfini.o"
- ;;
+ tm_file="dbxelf.h elfos.h svr4.h ${tm_file}"
+ extra_parts="crtinit.o crtfini.o"
+ ;;
arm-*-coff* | armel-*-coff*)
- tm_file="arm/semi.h arm/aout.h arm/arm.h arm/coff.h"
- tmake_file=arm/t-arm-coff
- ;;
+ tm_file="arm/semi.h arm/aout.h arm/arm.h arm/coff.h"
+ tmake_file=arm/t-arm-coff
+ ;;
arm-semi-aout | armel-semi-aout)
- tm_file="arm/semi.h arm/aout.h arm/arm.h"
- tmake_file=arm/t-semi
- ;;
+ tm_file="arm/semi.h arm/aout.h arm/arm.h"
+ tmake_file=arm/t-semi
+ ;;
arm-semi-aof | armel-semi-aof)
- tm_file="arm/semiaof.h arm/aof.h arm/arm.h"
- tmake_file=arm/t-semi
- ;;
+ tm_file="arm/semiaof.h arm/aof.h arm/arm.h"
+ tmake_file=arm/t-semi
+ ;;
arm*-*-freebsd*|strongarm*-*-freebsd*)
- tm_file="dbxelf.h elfos.h ${fbsd_tm_file} arm/elf.h arm/aout.h arm/freebsd.h arm/arm.h"
- tmake_file="${tmake_file} arm/t-strongarm-elf"
- ;;
+ tm_file="dbxelf.h elfos.h ${fbsd_tm_file} arm/elf.h arm/aout.h arm/freebsd.h arm/arm.h"
+ tmake_file="${tmake_file} arm/t-strongarm-elf"
+ ;;
arm*-*-netbsdelf*)
- tm_file="dbxelf.h elfos.h netbsd.h netbsd-elf.h arm/elf.h arm/aout.h arm/arm.h arm/netbsd-elf.h"
- tmake_file="${tmake_file} arm/t-netbsd"
- ;;
+ tm_file="dbxelf.h elfos.h netbsd.h netbsd-elf.h arm/elf.h arm/aout.h arm/arm.h arm/netbsd-elf.h"
+ tmake_file="${tmake_file} arm/t-netbsd"
+ ;;
arm*-*-netbsd*)
- tm_file="arm/aout.h arm/arm.h netbsd.h netbsd-aout.h arm/netbsd.h"
- tmake_file="t-netbsd arm/t-netbsd"
- extra_parts=""
- use_collect2=yes
- ;;
-arm*-*-linux*) # ARM GNU/Linux with ELF
- tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h arm/linux-gas.h arm/linux-elf.h"
- tmake_file="t-slibgcc-elf-ver t-linux arm/t-linux"
- extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
- gnu_ld=yes
- case x${enable_threads} in
- x | xyes | xpthreads | xposix)
- thread_file='posix'
- ;;
- esac
- ;;
-arm*-*-uclinux*) # ARM ucLinux
- tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h arm/linux-gas.h arm/linux-elf.h arm/uclinux-elf.h"
- tmake_file=arm/t-arm-elf
- ;;
+ tm_file="arm/aout.h arm/arm.h netbsd.h netbsd-aout.h arm/netbsd.h"
+ tmake_file="t-netbsd arm/t-netbsd"
+ extra_parts=""
+ use_collect2=yes
+ ;;
+arm*-*-linux*) # ARM GNU/Linux with ELF
+ tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h arm/linux-gas.h arm/linux-elf.h"
+ tmake_file="t-slibgcc-elf-ver t-linux arm/t-linux"
+ extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
+ gnu_ld=yes
+ case x${enable_threads} in
+ x | xyes | xpthreads | xposix)
+ thread_file='posix'
+ ;;
+ esac
+ ;;
+arm*-*-uclinux*) # ARM ucLinux
+ tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h arm/linux-gas.h arm/linux-elf.h arm/uclinux-elf.h"
+ tmake_file=arm/t-arm-elf
+ ;;
arm*-*-aout)
- tm_file="arm/aout.h arm/arm.h"
- tmake_file=arm/t-arm-aout
- ;;
+ tm_file="arm/aout.h arm/arm.h"
+ tmake_file=arm/t-arm-aout
+ ;;
arm*-*-ecos-elf)
- tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h arm/ecos-elf.h"
- tmake_file=arm/t-arm-elf
- ;;
+ tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h arm/ecos-elf.h"
+ tmake_file=arm/t-arm-elf
+ ;;
arm*-*-rtems*)
- xm_defines=POSIX
- tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h arm/rtems-elf.h rtems.h"
- tmake_file="arm/t-arm-elf t-rtems"
- if test x$enable_threads = xyes; then
- thread_file='rtems'
- fi
- ;;
+ xm_defines=POSIX
+ tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h arm/rtems-elf.h rtems.h"
+ tmake_file="arm/t-arm-elf t-rtems"
+ if test x$enable_threads = xyes; then
+ thread_file='rtems'
+ fi
+ ;;
arm*-*-elf | ep9312-*-elf)
- tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h"
- tmake_file=arm/t-arm-elf
- ;;
+ tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h"
+ tmake_file=arm/t-arm-elf
+ ;;
arm*-*-conix*)
- tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/conix-elf.h arm/aout.h arm/arm.h"
- tmake_file=arm/t-arm-elf
- ;;
+ tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/conix-elf.h arm/aout.h arm/arm.h"
+ tmake_file=arm/t-arm-elf
+ ;;
arm*-*-oabi)
- tm_file="arm/unknown-elf-oabi.h dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h"
- tmake_file=arm/t-arm-elf
- ;;
+ tm_file="arm/unknown-elf-oabi.h dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h"
+ tmake_file=arm/t-arm-elf
+ ;;
arm-*-pe*)
- tm_file="arm/semi.h arm/aout.h arm/arm.h arm/coff.h arm/pe.h"
- tmake_file=arm/t-pe
- extra_objs="pe.o"
- ;;
+ tm_file="arm/semi.h arm/aout.h arm/arm.h arm/coff.h arm/pe.h"
+ tmake_file=arm/t-pe
+ extra_objs="pe.o"
+ ;;
avr-*-*)
- ;;
+ ;;
c4x-*-rtems* | tic4x-*-rtems*)
- xm_defines=POSIX
- tmake_file="c4x/t-c4x t-rtems"
- tm_file="c4x/c4x.h c4x/rtems.h rtems.h"
- if test x$enable_threads = xyes; then
- thread_file='rtems'
- fi
- c_target_objs="c4x-c.o"
- cxx_target_objs="c4x-c.o"
- ;;
+ xm_defines=POSIX
+ tmake_file="c4x/t-c4x t-rtems"
+ tm_file="c4x/c4x.h c4x/rtems.h rtems.h"
+ if test x$enable_threads = xyes; then
+ thread_file='rtems'
+ fi
+ c_target_objs="c4x-c.o"
+ cxx_target_objs="c4x-c.o"
+ ;;
c4x-* | tic4x-*)
- tmake_file=c4x/t-c4x
- c_target_objs="c4x-c.o"
- cxx_target_objs="c4x-c.o"
- ;;
+ tmake_file=c4x/t-c4x
+ c_target_objs="c4x-c.o"
+ cxx_target_objs="c4x-c.o"
+ ;;
cris-*-aout)
- tm_file="dbxelf.h ${tm_file} cris/aout.h"
- gas=yes
- tmake_file="cris/t-cris cris/t-aout"
- ;;
+ tm_file="dbxelf.h ${tm_file} cris/aout.h"
+ gas=yes
+ tmake_file="cris/t-cris cris/t-aout"
+ ;;
cris-*-elf | cris-*-none)
- tm_file="dbxelf.h elfos.h ${tm_file}"
- tmake_file="cris/t-cris cris/t-elfmulti"
- gas=yes
- ;;
+ tm_file="dbxelf.h elfos.h ${tm_file}"
+ tmake_file="cris/t-cris cris/t-elfmulti"
+ gas=yes
+ ;;
cris-*-linux*)
- tm_file="dbxelf.h elfos.h svr4.h ${tm_file} linux.h cris/linux.h"
- tmake_file="cris/t-cris t-slibgcc-elf-ver cris/t-linux"
- ;;
+ tm_file="dbxelf.h elfos.h svr4.h ${tm_file} linux.h cris/linux.h"
+ tmake_file="cris/t-cris t-slibgcc-elf-ver cris/t-linux"
+ ;;
d30v-*)
- tm_file="dbxelf.h elfos.h svr4.h ${tm_file}"
- ;;
+ tm_file="dbxelf.h elfos.h svr4.h ${tm_file}"
+ ;;
dsp16xx-*)
- ;;
+ ;;
fr30-*-elf)
- tm_file="dbxelf.h elfos.h svr4.h ${tm_file}"
- tmake_file=fr30/t-fr30
- extra_parts="crti.o crtn.o crtbegin.o crtend.o"
- ;;
+ tm_file="dbxelf.h elfos.h svr4.h ${tm_file}"
+ tmake_file=fr30/t-fr30
+ extra_parts="crti.o crtn.o crtbegin.o crtend.o"
+ ;;
frv-*-elf)
- tm_file="dbxelf.h elfos.h svr4.h ${tm_file} frv/frv-abi.h"
- tmake_file=frv/t-frv
- ;;
+ tm_file="dbxelf.h elfos.h svr4.h ${tm_file} frv/frv-abi.h"
+ tmake_file=frv/t-frv
+ ;;
h8300-*-rtems*)
- xm_defines=POSIX
- tmake_file="h8300/t-h8300 t-rtems"
- tm_file="h8300/h8300.h h8300/rtems.h rtems.h"
- if test x$enable_threads = xyes; then
- thread_file='rtems'
- fi
- ;;
+ xm_defines=POSIX
+ tmake_file="h8300/t-h8300 t-rtems"
+ tm_file="h8300/h8300.h h8300/rtems.h rtems.h"
+ if test x$enable_threads = xyes; then
+ thread_file='rtems'
+ fi
+ ;;
h8300-*-elf*)
- tmake_file="h8300/t-h8300 h8300/t-elf"
- tm_file="h8300/h8300.h h8300/elf.h"
- ;;
+ tmake_file="h8300/t-h8300 h8300/t-elf"
+ tm_file="h8300/h8300.h h8300/elf.h"
+ ;;
h8300-*-*)
- ;;
+ ;;
hppa*64*-*-linux* | parisc*64*-*-linux*)
- target_cpu_default="(MASK_PA_11 | MASK_PA_20)"
- tm_file="pa/pa64-start.h ${tm_file} dbxelf.h elfos.h svr4.h linux.h \
- pa/pa-linux.h pa/pa64-regs.h pa/pa-64.h pa/pa64-linux.h"
- tmake_file=pa/t-linux64
- gas=yes gnu_ld=yes
- need_64bit_hwint=yes
- ;;
+ target_cpu_default="(MASK_PA_11 | MASK_PA_20)"
+ tm_file="pa/pa64-start.h ${tm_file} dbxelf.h elfos.h svr4.h linux.h \
+ pa/pa-linux.h pa/pa64-regs.h pa/pa-64.h pa/pa64-linux.h"
+ tmake_file=pa/t-linux64
+ gas=yes gnu_ld=yes
+ need_64bit_hwint=yes
+ ;;
hppa*-*-linux* | parisc*-*-linux*)
- target_cpu_default="MASK_PA_11 | MASK_NO_SPACE_REGS"
- tm_file="${tm_file} dbxelf.h elfos.h svr4.h linux.h pa/pa-linux.h \
- pa/pa32-regs.h pa/pa32-linux.h"
- tmake_file="t-slibgcc-elf-ver t-linux pa/t-linux"
- ;;
+ target_cpu_default="MASK_PA_11 | MASK_NO_SPACE_REGS"
+ tm_file="${tm_file} dbxelf.h elfos.h svr4.h linux.h pa/pa-linux.h \
+ pa/pa32-regs.h pa/pa32-linux.h"
+ tmake_file="t-slibgcc-elf-ver t-linux pa/t-linux"
+ ;;
hppa*-*-openbsd*)
- target_cpu_default="MASK_PA_11"
- tmake_file=pa/t-bsd
- ;;
+ target_cpu_default="MASK_PA_11"
+ tmake_file=pa/t-bsd
+ ;;
hppa1.1-*-pro*)
- target_cpu_default="(MASK_JUMP_IN_DELAY | MASK_PORTABLE_RUNTIME | MASK_GAS | MASK_NO_SPACE_REGS | MASK_SOFT_FLOAT)"
- tm_file="${tm_file} pa/pa32-regs.h dbxelf.h elfos.h pa/elf.h pa/pa-pro-end.h libgloss.h"
- tmake_file="pa/t-bsd pa/t-pro"
- xmake_file="pa/x-ada"
- ;;
+ target_cpu_default="(MASK_JUMP_IN_DELAY | MASK_PORTABLE_RUNTIME | MASK_GAS | MASK_NO_SPACE_REGS | MASK_SOFT_FLOAT)"
+ tm_file="${tm_file} pa/pa32-regs.h dbxelf.h elfos.h pa/elf.h pa/pa-pro-end.h libgloss.h"
+ tmake_file="pa/t-bsd pa/t-pro"
+ xmake_file="pa/x-ada"
+ ;;
hppa1.1-*-osf*)
- target_cpu_default="MASK_PA_11"
- tm_file="${tm_file} pa/pa32-regs.h pa/som.h pa/pa-osf.h"
- tmake_file="pa/t-bsd pa/t-pa"
- xmake_file="pa/x-ada"
- use_collect2=yes
- ;;
+ target_cpu_default="MASK_PA_11"
+ tm_file="${tm_file} pa/pa32-regs.h pa/som.h pa/pa-osf.h"
+ tmake_file="pa/t-bsd pa/t-pa"
+ xmake_file="pa/x-ada"
+ use_collect2=yes
+ ;;
hppa1.1-*-rtems*)
- xm_defines=POSIX
- target_cpu_default="(MASK_JUMP_IN_DELAY | MASK_PORTABLE_RUNTIME | MASK_GAS | MASK_NO_SPACE_REGS | MASK_SOFT_FLOAT)"
- tm_file="${tm_file} pa/pa32-regs.h dbxelf.h elfos.h pa/elf.h pa/pa-pro-end.h libgloss.h pa/rtems.h rtems.h"
- tmake_file="pa/t-bsd pa/t-pro t-rtems"
- xmake_file="pa/x-ada"
- if test x$enable_threads = xyes; then
- thread_file='rtems'
- fi
- ;;
+ xm_defines=POSIX
+ target_cpu_default="(MASK_JUMP_IN_DELAY | MASK_PORTABLE_RUNTIME | MASK_GAS | MASK_NO_SPACE_REGS | MASK_SOFT_FLOAT)"
+ tm_file="${tm_file} pa/pa32-regs.h dbxelf.h elfos.h pa/elf.h pa/pa-pro-end.h libgloss.h pa/rtems.h rtems.h"
+ tmake_file="pa/t-bsd pa/t-pro t-rtems"
+ xmake_file="pa/x-ada"
+ if test x$enable_threads = xyes; then
+ thread_file='rtems'
+ fi
+ ;;
hppa1.0-*-osf*)
- tm_file="${tm_file} pa/pa32-regs.h pa/som.h pa/pa-osf.h"
- tmake_file="pa/t-bsd pa/t-pa"
- xmake_file="pa/x-ada"
- use_collect2=yes
- ;;
+ tm_file="${tm_file} pa/pa32-regs.h pa/som.h pa/pa-osf.h"
+ tmake_file="pa/t-bsd pa/t-pa"
+ xmake_file="pa/x-ada"
+ use_collect2=yes
+ ;;
hppa1.1-*-bsd*)
- tm_file="${tm_file} pa/pa32-regs.h pa/som.h"
- target_cpu_default="MASK_PA_11"
- tmake_file="pa/t-bsd pa/t-pa"
- xmake_file="pa/x-ada"
- use_collect2=yes
- ;;
+ tm_file="${tm_file} pa/pa32-regs.h pa/som.h"
+ target_cpu_default="MASK_PA_11"
+ tmake_file="pa/t-bsd pa/t-pa"
+ xmake_file="pa/x-ada"
+ use_collect2=yes
+ ;;
hppa1.0-*-bsd*)
- tm_file="${tm_file} pa/pa32-regs.h pa/som.h"
- tmake_file="pa/t-bsd pa/t-pa"
- xmake_file="pa/x-ada"
- use_collect2=yes
- ;;
+ tm_file="${tm_file} pa/pa32-regs.h pa/som.h"
+ tmake_file="pa/t-bsd pa/t-pa"
+ xmake_file="pa/x-ada"
+ use_collect2=yes
+ ;;
hppa1.0-*-hpux7*)
- tm_file="pa/pa-oldas.h ${tm_file} pa/pa32-regs.h pa/som.h pa/pa-hpux7.h"
- xm_defines=POSIX
- tmake_file=pa/t-pa-hpux
- install_headers_dir=install-headers-cpio
- use_collect2=yes
- ;;
+ tm_file="pa/pa-oldas.h ${tm_file} pa/pa32-regs.h pa/som.h pa/pa-hpux7.h"
+ xm_defines=POSIX
+ tmake_file=pa/t-pa-hpux
+ install_headers_dir=install-headers-cpio
+ use_collect2=yes
+ ;;
hppa1.0-*-hpux8.0[0-2]*)
- tm_file="${tm_file} pa/pa32-regs.h pa/som.h pa/pa-hpux.h"
- xm_defines=POSIX
- tmake_file=pa/t-pa-hpux
- if test x$gas != xyes
- then
- tm_file="pa/pa-oldas.h ${tm_file}"
- fi
- install_headers_dir=install-headers-cpio
- use_collect2=yes
- ;;
+ tm_file="${tm_file} pa/pa32-regs.h pa/som.h pa/pa-hpux.h"
+ xm_defines=POSIX
+ tmake_file=pa/t-pa-hpux
+ if test x$gas != xyes
+ then
+ tm_file="pa/pa-oldas.h ${tm_file}"
+ fi
+ install_headers_dir=install-headers-cpio
+ use_collect2=yes
+ ;;
hppa1.1-*-hpux8.0[0-2]*)
- target_cpu_default="MASK_PA_11"
- tm_file="${tm_file} pa/pa32-regs.h pa/som.h pa/pa-hpux.h"
- xm_defines=POSIX
- tmake_file=pa/t-pa-hpux
- if test x$gas != xyes
- then
- tm_file="pa/pa-oldas.h ${tm_file}"
- fi
- install_headers_dir=install-headers-cpio
- use_collect2=yes
- ;;
+ target_cpu_default="MASK_PA_11"
+ tm_file="${tm_file} pa/pa32-regs.h pa/som.h pa/pa-hpux.h"
+ xm_defines=POSIX
+ tmake_file=pa/t-pa-hpux
+ if test x$gas != xyes
+ then
+ tm_file="pa/pa-oldas.h ${tm_file}"
+ fi
+ install_headers_dir=install-headers-cpio
+ use_collect2=yes
+ ;;
hppa1.1-*-hpux8*)
- target_cpu_default="MASK_PA_11"
- tm_file="${tm_file} pa/pa32-regs.h pa/som.h pa/pa-hpux.h"
- xm_defines=POSIX
- tmake_file=pa/t-pa-hpux
- install_headers_dir=install-headers-cpio
- use_collect2=yes
- ;;
+ target_cpu_default="MASK_PA_11"
+ tm_file="${tm_file} pa/pa32-regs.h pa/som.h pa/pa-hpux.h"
+ xm_defines=POSIX
+ tmake_file=pa/t-pa-hpux
+ install_headers_dir=install-headers-cpio
+ use_collect2=yes
+ ;;
hppa1.0-*-hpux8*)
- tm_file="${tm_file} pa/pa32-regs.h pa/som.h pa/pa-hpux.h"
- xm_defines=POSIX
- tmake_file=pa/t-pa-hpux
- install_headers_dir=install-headers-cpio
- use_collect2=yes
- ;;
+ tm_file="${tm_file} pa/pa32-regs.h pa/som.h pa/pa-hpux.h"
+ xm_defines=POSIX
+ tmake_file=pa/t-pa-hpux
+ install_headers_dir=install-headers-cpio
+ use_collect2=yes
+ ;;
hppa1.1-*-hpux10* | hppa2*-*-hpux10*)
- target_cpu_default="MASK_PA_11"
- tm_file="${tm_file} pa/pa32-regs.h pa/long_double.h pa/som.h pa/pa-hpux.h pa/pa-hpux10.h"
- xm_defines=POSIX
- tmake_file="pa/t-pa pa/t-pa-hpux pa/t-hpux-shlib"
- xmake_file="pa/x-ada"
- if test x$enable_threads = x; then
- enable_threads=$have_pthread_h
- fi
- case x${enable_threads} in
- xyes | xdce)
- tmake_file="${tmake_file} pa/t-dce-thr"
- ;;
- esac
- install_headers_dir=install-headers-cpio
- use_collect2=yes
- ;;
+ target_cpu_default="MASK_PA_11"
+ tm_file="${tm_file} pa/pa32-regs.h pa/long_double.h pa/som.h pa/pa-hpux.h pa/pa-hpux10.h"
+ xm_defines=POSIX
+ tmake_file="pa/t-pa pa/t-pa-hpux pa/t-hpux-shlib"
+ xmake_file="pa/x-ada"
+ if test x$enable_threads = x; then
+ enable_threads=$have_pthread_h
+ fi
+ case x${enable_threads} in
+ xyes | xdce)
+ tmake_file="${tmake_file} pa/t-dce-thr"
+ ;;
+ esac
+ install_headers_dir=install-headers-cpio
+ use_collect2=yes
+ ;;
hppa1.0-*-hpux10*)
- tm_file="${tm_file} pa/pa32-regs.h pa/long_double.h pa/som.h pa/pa-hpux.h pa/pa-hpux10.h"
- xm_defines=POSIX
- tmake_file="pa/t-pa pa/t-pa-hpux pa/t-hpux-shlib"
- xmake_file="pa/x-ada"
- if test x$enable_threads = x; then
- enable_threads=$have_pthread_h
- fi
- case x${enable_threads} in
- xyes | xdce)
- tmake_file="${tmake_file} pa/t-dce-thr"
- ;;
- esac
- install_headers_dir=install-headers-cpio
- use_collect2=yes
- ;;
+ tm_file="${tm_file} pa/pa32-regs.h pa/long_double.h pa/som.h pa/pa-hpux.h pa/pa-hpux10.h"
+ xm_defines=POSIX
+ tmake_file="pa/t-pa pa/t-pa-hpux pa/t-hpux-shlib"
+ xmake_file="pa/x-ada"
+ if test x$enable_threads = x; then
+ enable_threads=$have_pthread_h
+ fi
+ case x${enable_threads} in
+ xyes | xdce)
+ tmake_file="${tmake_file} pa/t-dce-thr"
+ ;;
+ esac
+ install_headers_dir=install-headers-cpio
+ use_collect2=yes
+ ;;
hppa*64*-*-hpux11*)
- xm_defines=POSIX
- if test x$gas = xyes
- then
- tm_file="pa/pa64-start.h ${tm_file} dbxelf.h elfos.h \
- pa/pa64-regs.h pa/long_double.h pa/pa-hpux.h \
- pa/pa-hpux11.h pa/pa-64.h pa/pa64-hpux.h"
- else
- tm_file="pa/pa64-start.h ${tm_file} dbxelf.h pa/elf.h \
- pa/pa64-regs.h pa/long_double.h pa/pa-hpux.h \
- pa/pa-hpux11.h pa/pa-64.h pa/pa64-hpux.h"
- fi
- need_64bit_hwint=yes
- tmake_file="pa/t-pa64 pa/t-pa-hpux"
- xmake_file="pa/x-ada"
- target_cpu_default="(MASK_PA_11|MASK_PA_20|MASK_GAS)"
- extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtbeginT.o"
- if test x$gnu_ld = xyes
- then
- target_cpu_default="${target_cpu_default}|MASK_GNU_LD"
- fi
-# if [ x$enable_threads = x ]; then
-# enable_threads=$have_pthread_h
-# fi
-# if [ x$enable_threads = xyes ]; then
-# thread_file='dce'
-# tmake_file="${tmake_file} pa/t-dce-thr"
-# fi
- install_headers_dir=install-headers-cpio
- ;;
+ xm_defines=POSIX
+ if test x$gas = xyes
+ then
+ tm_file="pa/pa64-start.h ${tm_file} dbxelf.h elfos.h \
+ pa/pa64-regs.h pa/long_double.h pa/pa-hpux.h \
+ pa/pa-hpux11.h pa/pa-64.h pa/pa64-hpux.h"
+ else
+ tm_file="pa/pa64-start.h ${tm_file} dbxelf.h pa/elf.h \
+ pa/pa64-regs.h pa/long_double.h pa/pa-hpux.h \
+ pa/pa-hpux11.h pa/pa-64.h pa/pa64-hpux.h"
+ fi
+ need_64bit_hwint=yes
+ tmake_file="pa/t-pa64 pa/t-pa-hpux"
+ xmake_file="pa/x-ada"
+ target_cpu_default="(MASK_PA_11|MASK_PA_20|MASK_GAS)"
+ extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtbeginT.o"
+ if test x$gnu_ld = xyes
+ then
+ target_cpu_default="${target_cpu_default}|MASK_GNU_LD"
+ fi
+# if [ x$enable_threads = x ]; then
+# enable_threads=$have_pthread_h
+# fi
+# if [ x$enable_threads = xyes ]; then
+# thread_file='dce'
+# tmake_file="${tmake_file} pa/t-dce-thr"
+# fi
+ install_headers_dir=install-headers-cpio
+ ;;
hppa1.1-*-hpux11* | hppa2*-*-hpux11*)
- target_cpu_default="MASK_PA_11"
- tm_file="${tm_file} pa/pa32-regs.h pa/long_double.h pa/som.h pa/pa-hpux.h pa/pa-hpux11.h"
- xm_defines=POSIX
- tmake_file="pa/t-pa pa/t-pa-hpux pa/t-hpux-shlib"
- xmake_file="pa/x-ada"
-# if test x$enable_threads = x; then
-# enable_threads=$have_pthread_h
-# fi
-# if test x$enable_threads = xyes; then
-# thread_file='dce'
-# tmake_file="${tmake_file} pa/t-dce-thr"
-# fi
- install_headers_dir=install-headers-cpio
- use_collect2=yes
- ;;
+ target_cpu_default="MASK_PA_11"
+ tm_file="${tm_file} pa/pa32-regs.h pa/long_double.h pa/som.h pa/pa-hpux.h pa/pa-hpux11.h"
+ xm_defines=POSIX
+ tmake_file="pa/t-pa pa/t-pa-hpux pa/t-hpux-shlib"
+ xmake_file="pa/x-ada"
+# if test x$enable_threads = x; then
+# enable_threads=$have_pthread_h
+# fi
+# if test x$enable_threads = xyes; then
+# thread_file='dce'
+# tmake_file="${tmake_file} pa/t-dce-thr"
+# fi
+ install_headers_dir=install-headers-cpio
+ use_collect2=yes
+ ;;
hppa1.0-*-hpux11*)
- tm_file="${tm_file} pa/pa32-regs.h pa/long_double.h pa/som.h pa/pa-hpux.h pa/pa-hpux11.h"
- xm_defines=POSIX
- tmake_file="pa/t-pa pa/t-pa-hpux pa/t-hpux-shlib"
- xmake_file="pa/x-ada"
-# if test x$enable_threads = x; then
-# enable_threads=$have_pthread_h
-# fi
-# if test x$enable_threads = xyes; then
-# thread_file='dce'
-# tmake_file="${tmake_file} pa/t-dce-thr"
-# fi
- install_headers_dir=install-headers-cpio
- use_collect2=yes
- ;;
+ tm_file="${tm_file} pa/pa32-regs.h pa/long_double.h pa/som.h pa/pa-hpux.h pa/pa-hpux11.h"
+ xm_defines=POSIX
+ tmake_file="pa/t-pa pa/t-pa-hpux pa/t-hpux-shlib"
+ xmake_file="pa/x-ada"
+# if test x$enable_threads = x; then
+# enable_threads=$have_pthread_h
+# fi
+# if test x$enable_threads = xyes; then
+# thread_file='dce'
+# tmake_file="${tmake_file} pa/t-dce-thr"
+# fi
+ install_headers_dir=install-headers-cpio
+ use_collect2=yes
+ ;;
hppa1.1-*-hpux* | hppa2*-*-hpux*)
- target_cpu_default="MASK_PA_11"
- tm_file="${tm_file} pa/pa32-regs.h pa/som.h pa/pa-hpux.h pa/pa-hpux9.h"
- xm_defines=POSIX
- tmake_file=pa/t-pa-hpux
- install_headers_dir=install-headers-cpio
- use_collect2=yes
- ;;
+ target_cpu_default="MASK_PA_11"
+ tm_file="${tm_file} pa/pa32-regs.h pa/som.h pa/pa-hpux.h pa/pa-hpux9.h"
+ xm_defines=POSIX
+ tmake_file=pa/t-pa-hpux
+ install_headers_dir=install-headers-cpio
+ use_collect2=yes
+ ;;
hppa1.0-*-hpux*)
- tm_file="${tm_file} pa/pa32-regs.h pa/som.h pa/pa-hpux.h pa/pa-hpux9.h"
- xm_defines=POSIX
- tmake_file=pa/t-pa-hpux
- install_headers_dir=install-headers-cpio
- use_collect2=yes
- ;;
+ tm_file="${tm_file} pa/pa32-regs.h pa/som.h pa/pa-hpux.h pa/pa-hpux9.h"
+ xm_defines=POSIX
+ tmake_file=pa/t-pa-hpux
+ install_headers_dir=install-headers-cpio
+ use_collect2=yes
+ ;;
hppa1.1-*-hiux* | hppa2*-*-hiux*)
- target_cpu_default="MASK_PA_11"
- tm_file="${tm_file} pa/pa32-regs.h pa/som.h pa/pa-hpux.h pa/pa-hiux.h"
- xm_defines=POSIX
- tmake_file=pa/t-pa-hpux
- install_headers_dir=install-headers-cpio
- use_collect2=yes
- ;;
+ target_cpu_default="MASK_PA_11"
+ tm_file="${tm_file} pa/pa32-regs.h pa/som.h pa/pa-hpux.h pa/pa-hiux.h"
+ xm_defines=POSIX
+ tmake_file=pa/t-pa-hpux
+ install_headers_dir=install-headers-cpio
+ use_collect2=yes
+ ;;
hppa1.0-*-hiux*)
- tm_file="${tm_file} pa/pa32-regs.h pa/som.h pa/pa-hpux.h pa/pa-hiux.h"
- xm_defines=POSIX
- tmake_file=pa/t-pa-hpux
- install_headers_dir=install-headers-cpio
- use_collect2=yes
- ;;
+ tm_file="${tm_file} pa/pa32-regs.h pa/som.h pa/pa-hpux.h pa/pa-hiux.h"
+ xm_defines=POSIX
+ tmake_file=pa/t-pa-hpux
+ install_headers_dir=install-headers-cpio
+ use_collect2=yes
+ ;;
hppa*-*-lites*)
- tm_file="${tm_file} pa/pa32-regs.h dbxelf.h elfos.h pa/elf.h"
- target_cpu_default="MASK_PA_11"
- tmake_file="pa/t-bsd pa/t-pa"
- xmake_file="pa/x-ada"
- use_collect2=yes
- ;;
+ tm_file="${tm_file} pa/pa32-regs.h dbxelf.h elfos.h pa/elf.h"
+ target_cpu_default="MASK_PA_11"
+ tmake_file="pa/t-bsd pa/t-pa"
+ xmake_file="pa/x-ada"
+ use_collect2=yes
+ ;;
hppa*-*-mpeix*)
- tm_file="${tm_file} pa/pa32-regs.h pa/long_double.h pa/som.h pa/pa-mpeix.h"
- tmake_file=pa/t-mpeix
- echo "You must use gas. Assuming it is already installed."
- gas=yes
- install_headers_dir=install-headers-tar
- use_collect2=yes
- ;;
-i370-*-opened*) # IBM 360/370/390 Architecture
- xm_defines='POSIX FATAL_EXIT_CODE=12'
- tm_file=i370/oe.h
- tmake_file="i370/t-oe i370/t-i370"
- c_target_objs="i370-c.o"
- cxx_target_objs="i370-c.o"
- ;;
+ tm_file="${tm_file} pa/pa32-regs.h pa/long_double.h pa/som.h pa/pa-mpeix.h"
+ tmake_file=pa/t-mpeix
+ echo "You must use gas. Assuming it is already installed."
+ gas=yes
+ install_headers_dir=install-headers-tar
+ use_collect2=yes
+ ;;
+i370-*-opened*) # IBM 360/370/390 Architecture
+ xm_defines='POSIX FATAL_EXIT_CODE=12'
+ tm_file=i370/oe.h
+ tmake_file="i370/t-oe i370/t-i370"
+ c_target_objs="i370-c.o"
+ cxx_target_objs="i370-c.o"
+ ;;
i370-*-mvs*)
- xm_defines='POSIX FATAL_EXIT_CODE=12'
- tm_file=i370/mvs.h
- tmake_file="i370/t-i370"
- c_target_objs="i370-c.o"
- cxx_target_objs="i370-c.o"
- ;;
+ xm_defines='POSIX FATAL_EXIT_CODE=12'
+ tm_file=i370/mvs.h
+ tmake_file="i370/t-i370"
+ c_target_objs="i370-c.o"
+ cxx_target_objs="i370-c.o"
+ ;;
i370-*-linux*)
- tm_file="dbxelf.h elfos.h svr4.h linux.h i370/linux.h ${tm_file}"
- tmake_file="t-slibgcc-elf-ver t-linux"
- # broken_install=yes
- elf=yes
- ;;
+ tm_file="dbxelf.h elfos.h svr4.h linux.h i370/linux.h ${tm_file}"
+ tmake_file="t-slibgcc-elf-ver t-linux"
+ # broken_install=yes
+ elf=yes
+ ;;
i[34567]86-*-darwin*)
- tm_file="${tm_file} i386/darwin.h"
- ;;
+ tm_file="${tm_file} i386/darwin.h"
+ ;;
i[34567]86-*-elf*)
- xm_defines=POSIX
- tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/i386elf.h"
- tmake_file="i386/t-i386elf t-svr4"
- ;;
-i[34567]86-ncr-sysv4*) # NCR 3000 - ix86 running system V.4
- xm_defines="POSIX SMALL_ARG_MAX"
- if test x$stabs = xyes -a x$gas = xyes
- then
- tm_file=i386/sysv4gdb.h
- else
- tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h i386/sysv4.h i386/sysv4-cpp.h"
- fi
- extra_parts="crtbegin.o crtend.o"
- tmake_file=i386/t-crtpic
- ;;
-i[34567]86-*-netware) # Intel 80386's running netware
- tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h i386/sysv4.h netware.h i386/netware.h"
- tmake_file=i386/t-netware
- ;;
+ xm_defines=POSIX
+ tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/i386elf.h"
+ tmake_file="i386/t-i386elf t-svr4"
+ ;;
+i[34567]86-ncr-sysv4*) # NCR 3000 - ix86 running system V.4
+ xm_defines="POSIX SMALL_ARG_MAX"
+ if test x$stabs = xyes -a x$gas = xyes
+ then
+ tm_file=i386/sysv4gdb.h
+ else
+ tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h i386/sysv4.h i386/sysv4-cpp.h"
+ fi
+ extra_parts="crtbegin.o crtend.o"
+ tmake_file=i386/t-crtpic
+ ;;
+i[34567]86-*-netware) # Intel 80386's running netware
+ tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h i386/sysv4.h netware.h i386/netware.h"
+ tmake_file=i386/t-netware
+ ;;
i[34567]86-sequent-ptx4* | i[34567]86-sequent-sysv4*)
- if test x$gas = xyes
- then
- tm_file="${tm_file} usegas.h"
- fi
- xm_defines="POSIX SMALL_ARG_MAX"
- tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h ptx4.h i386/ptx4-i.h"
- tmake_file=t-svr4
- extra_parts="crtbegin.o crtend.o"
- install_headers_dir=install-headers-cpio
- ;;
-i[34567]86-sequent-sysv*) # would otherwise be caught by i?86-*-sysv*
- echo "*** Configuration $machine not supported" 1>&2
- exit 1
- ;;
+ if test x$gas = xyes
+ then
+ tm_file="${tm_file} usegas.h"
+ fi
+ xm_defines="POSIX SMALL_ARG_MAX"
+ tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h ptx4.h i386/ptx4-i.h"
+ tmake_file=t-svr4
+ extra_parts="crtbegin.o crtend.o"
+ install_headers_dir=install-headers-cpio
+ ;;
+i[34567]86-sequent-sysv*) # would otherwise be caught by i?86-*-sysv*
+ echo "*** Configuration $machine not supported" 1>&2
+ exit 1
+ ;;
i[34567]86-*-aout*)
- tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/gstabs.h i386/i386-aout.h"
- ;;
+ tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/gstabs.h i386/i386-aout.h"
+ ;;
i[34567]86-*-beoself* | i[34567]86-*-beos*)
- xm_defines=POSIX
- tmake_file='i386/t-beos i386/t-crtpic'
- tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h i386/beos-elf.h"
- extra_parts='crtbegin.o crtend.o'
- ;;
+ xm_defines=POSIX
+ tmake_file='i386/t-beos i386/t-crtpic'
+ tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h i386/beos-elf.h"
+ extra_parts='crtbegin.o crtend.o'
+ ;;
i[34567]86-*-freebsd2 | i[34567]86-*-freebsd2.* | i[34567]86-*-freebsd*aout*)
- tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/gstabs.h i386/freebsd-aout.h"
- tmake_file=t-freebsd
- ;;
+ tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/gstabs.h i386/freebsd-aout.h"
+ tmake_file=t-freebsd
+ ;;
i[34567]86-*-freebsd*)
- tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h ${fbsd_tm_file} i386/freebsd.h"
- ;;
+ tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h ${fbsd_tm_file} i386/freebsd.h"
+ ;;
x86_64-*-freebsd*)
- tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h ${fbsd_tm_file} i386/x86-64.h i386/freebsd.h i386/freebsd64.h"
- ;;
+ tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h ${fbsd_tm_file} i386/x86-64.h i386/freebsd.h i386/freebsd64.h"
+ ;;
i[34567]86-*-netbsdelf*)
- tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h netbsd.h netbsd-elf.h i386/netbsd-elf.h"
- ;;
+ tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h netbsd.h netbsd-elf.h i386/netbsd-elf.h"
+ ;;
i[34567]86-*-netbsd*)
- tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/gstabs.h netbsd.h netbsd-aout.h i386/netbsd.h"
- tmake_file=t-netbsd
- extra_parts=""
- use_collect2=yes
- ;;
+ tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/gstabs.h netbsd.h netbsd-aout.h i386/netbsd.h"
+ tmake_file=t-netbsd
+ extra_parts=""
+ use_collect2=yes
+ ;;
x86_64-*-netbsd*)
- tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h netbsd.h netbsd-elf.h i386/x86-64.h i386/netbsd64.h"
- ;;
+ tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h netbsd.h netbsd-elf.h i386/x86-64.h i386/netbsd64.h"
+ ;;
i[34567]86-*-openbsd*)
- tm_file="${cpu_type}/${cpu_type}.h i386/unix.h i386/bsd.h i386/gas.h i386/gstabs.h openbsd-oldgas.h openbsd.h ${tm_file}"
- # needed to unconfuse gdb
- tmake_file="t-libc-ok t-openbsd i386/t-openbsd"
- # we need collect2 until our bug is fixed...
- use_collect2=yes
- ;;
+ tm_file="${cpu_type}/${cpu_type}.h i386/unix.h i386/bsd.h i386/gas.h i386/gstabs.h openbsd-oldgas.h openbsd.h ${tm_file}"
+ # needed to unconfuse gdb
+ tmake_file="t-libc-ok t-openbsd i386/t-openbsd"
+ # we need collect2 until our bug is fixed...
+ use_collect2=yes
+ ;;
i[34567]86-*-coff*)
- tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h dbxcoff.h i386/i386-coff.h"
- ;;
-i[34567]86-*-linux*oldld*) # would otherwise be caught by i?86-*-linux*
- echo "*** Configuration $machine not supported" 1>&2
- exit 1
- ;;
-i[34567]86-*-linux*aout*) # Intel 80386's running GNU/Linux
- # with a.out format
- tmake_file="t-linux-aout i386/t-crtstuff"
- tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/gstabs.h linux-aout.h i386/linux-aout.h"
- gnu_ld=yes
- ;;
-i[34567]86-*-linux*libc1) # Intel 80386's running GNU/Linux
- # with ELF format using the
- # GNU/Linux C library 5
- tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h linux.h i386/linux.h"
- tmake_file="t-slibgcc-elf-ver t-linux t-linux-gnulibc1 i386/t-crtstuff"
- extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
- gnu_ld=yes
- if test x$enable_threads = xyes; then
- thread_file='single'
- fi
- ;;
-i[34567]86-*-linux*) # Intel 80386's running GNU/Linux
- # with ELF format using glibc 2
- # aka GNU/Linux C library 6
- tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h linux.h i386/linux.h"
- tmake_file="t-slibgcc-elf-ver t-linux i386/t-crtstuff"
- ;;
+ tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h dbxcoff.h i386/i386-coff.h"
+ ;;
+i[34567]86-*-linux*oldld*) # would otherwise be caught by i?86-*-linux*
+ echo "*** Configuration $machine not supported" 1>&2
+ exit 1
+ ;;
+i[34567]86-*-linux*aout*) # Intel 80386's running GNU/Linux
+ # with a.out format
+ tmake_file="t-linux-aout i386/t-crtstuff"
+ tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/gstabs.h linux-aout.h i386/linux-aout.h"
+ gnu_ld=yes
+ ;;
+i[34567]86-*-linux*libc1) # Intel 80386's running GNU/Linux
+ # with ELF format using the
+ # GNU/Linux C library 5
+ tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h linux.h i386/linux.h"
+ tmake_file="t-slibgcc-elf-ver t-linux t-linux-gnulibc1 i386/t-crtstuff"
+ extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
+ gnu_ld=yes
+ if test x$enable_threads = xyes; then
+ thread_file='single'
+ fi
+ ;;
+i[34567]86-*-linux*) # Intel 80386's running GNU/Linux
+ # with ELF format using glibc 2
+ # aka GNU/Linux C library 6
+ tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h linux.h i386/linux.h"
+ tmake_file="t-slibgcc-elf-ver t-linux i386/t-crtstuff"
+ ;;
x86_64-*-linux*)
- tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h linux.h \
- i386/x86-64.h i386/linux64.h"
- tmake_file="t-slibgcc-elf-ver t-linux i386/t-linux64"
- ;;
+ tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h linux.h \
+ i386/x86-64.h i386/linux64.h"
+ tmake_file="t-slibgcc-elf-ver t-linux i386/t-linux64"
+ ;;
i[34567]86-*-gnu*)
- ;;
+ ;;
i[34567]86-go32-msdos | i[34567]86-*-go32*)
- echo "GO32/DJGPP V1.X is no longer supported. Use *-pc-msdosdjgpp for DJGPP V2.X instead."
- exit 1
- ;;
+ echo "GO32/DJGPP V1.X is no longer supported. Use *-pc-msdosdjgpp for DJGPP V2.X instead."
+ exit 1
+ ;;
i[34567]86-pc-msdosdjgpp*)
- xm_file=i386/xm-djgpp.h
- tm_file="dbxcoff.h ${tm_file} i386/djgpp.h"
- tmake_file=i386/t-djgpp
- gnu_ld=yes
- gas=yes
- exeext=.exe
- case $host in *pc-msdosdjgpp*)
- target_alias=djgpp
- ;;
- esac
- ;;
+ xm_file=i386/xm-djgpp.h
+ tm_file="dbxcoff.h ${tm_file} i386/djgpp.h"
+ tmake_file=i386/t-djgpp
+ gnu_ld=yes
+ gas=yes
+ exeext=.exe
+ case $host in *pc-msdosdjgpp*)
+ target_alias=djgpp
+ ;;
+ esac
+ ;;
i[34567]86-moss-msdos* | i[34567]86-*-moss*)
- tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h linux.h i386/linux.h i386/moss.h"
- tmake_file=t-libc-ok
- gnu_ld=yes
- gas=yes
- ;;
+ tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h linux.h i386/linux.h i386/moss.h"
+ tmake_file=t-libc-ok
+ gnu_ld=yes
+ gas=yes
+ ;;
i[34567]86-*-lynxos*)
- if test x$gas = xyes
- then
- tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/gstabs.h lynx.h i386/lynx.h"
- else
- tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/gstabs.h lynx-ng.h i386/lynx-ng.h"
- fi
- ;;
+ if test x$gas = xyes
+ then
+ tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/gstabs.h lynx.h i386/lynx.h"
+ else
+ tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/gstabs.h lynx-ng.h i386/lynx-ng.h"
+ fi
+ ;;
i[34567]86-*-mach*)
- tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/gstabs.h i386/mach.h"
-# tmake_file=t-libc-ok
- use_collect2=yes
- ;;
+ tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/gstabs.h i386/mach.h"
+# tmake_file=t-libc-ok
+ use_collect2=yes
+ ;;
i[34567]86-go32-rtems* | i[34567]86-*-rtemscoff*)
- # would otherwise be caught by i?86-*-rtems*
- echo "*** Configuration $machine not supported" 1>&2
- exit 1
- ;;
+ # would otherwise be caught by i?86-*-rtems*
+ echo "*** Configuration $machine not supported" 1>&2
+ exit 1
+ ;;
i[34567]86-*-rtems*)
- xm_defines=POSIX
- tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/i386elf.h i386/rtemself.h rtems.h"
- extra_parts="crtbegin.o crtend.o crti.o crtn.o"
- tmake_file="i386/t-rtems-i386 i386/t-crtstuff t-rtems"
- if test x$enable_threads = xyes; then
- thread_file='rtems'
- fi
- ;;
-i[34567]86-*-sco3.2v5*) # 80386 running SCO Open Server 5
- xm_defines=POSIX
- install_headers_dir=install-headers-cpio
- tm_file="${tm_file} i386/unix.h i386/att.h i386/sco5.h"
- if test x$gas = xyes
- then
- tm_file="usegas.h ${tm_file}"
- tmake_file=i386/t-sco5gas
- else
- tmake_file=i386/t-sco5
- fi
- extra_parts="crti.o crtbegin.o crtend.o crtbeginS.o crtendS.o"
- ;;
+ xm_defines=POSIX
+ tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/i386elf.h i386/rtemself.h rtems.h"
+ extra_parts="crtbegin.o crtend.o crti.o crtn.o"
+ tmake_file="i386/t-rtems-i386 i386/t-crtstuff t-rtems"
+ if test x$enable_threads = xyes; then
+ thread_file='rtems'
+ fi
+ ;;
+i[34567]86-*-sco3.2v5*) # 80386 running SCO Open Server 5
+ xm_defines=POSIX
+ install_headers_dir=install-headers-cpio
+ tm_file="${tm_file} i386/unix.h i386/att.h i386/sco5.h"
+ if test x$gas = xyes
+ then
+ tm_file="usegas.h ${tm_file}"
+ tmake_file=i386/t-sco5gas
+ else
+ tmake_file=i386/t-sco5
+ fi
+ extra_parts="crti.o crtbegin.o crtend.o crtbeginS.o crtendS.o"
+ ;;
i[34567]86-*-solaris2*)
- xm_defines="POSIX SMALL_ARG_MAX"
- tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h i386/sysv4.h sol2.h i386/sol2.h"
- tmake_file="i386/t-sol2 t-svr4"
- if test x$gnu_ld = xyes; then
- tmake_file="$tmake_file t-slibgcc-elf-ver"
- else
- tmake_file="$tmake_file t-slibgcc-sld"
- fi
- extra_parts="crt1.o crti.o crtn.o gcrt1.o gmon.o crtbegin.o crtend.o"
- if test x${enable_threads} = x; then
- enable_threads=$have_pthread_h
- if test x${enable_threads} = x; then
- enable_threads=$have_thread_h
- fi
- fi
- if test x${enable_threads} = xyes; then
- if test x${have_pthread_h} = xyes; then
- thread_file='posix'
- else
- thread_file='solaris'
- fi
- fi
- ;;
+ xm_defines="POSIX SMALL_ARG_MAX"
+ tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h i386/sysv4.h sol2.h i386/sol2.h"
+ tmake_file="i386/t-sol2 t-svr4"
+ if test x$gnu_ld = xyes; then
+ tmake_file="$tmake_file t-slibgcc-elf-ver"
+ else
+ tmake_file="$tmake_file t-slibgcc-sld"
+ fi
+ extra_parts="crt1.o crti.o crtn.o gcrt1.o gmon.o crtbegin.o crtend.o"
+ if test x${enable_threads} = x; then
+ enable_threads=$have_pthread_h
+ if test x${enable_threads} = x; then
+ enable_threads=$have_thread_h
+ fi
+ fi
+ if test x${enable_threads} = xyes; then
+ if test x${have_pthread_h} = xyes; then
+ thread_file='posix'
+ else
+ thread_file='solaris'
+ fi
+ fi
+ ;;
i[34567]86-*-sysv5*) # Intel x86 on System V Release 5
xm_defines=POSIX
tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h i386/sysv4.h i386/sysv5.h"
@@ -1263,1444 +1263,1444 @@
tmake_file="i386/t-crtpic t-svr4"
extra_parts="crtbegin.o crtend.o"
if test x$enable_threads = xyes; then
- thread_file='posix'
+ thread_file='posix'
fi
;;
-i[34567]86-*-sysv4*) # Intel 80386's running system V.4
- xm_defines="POSIX SMALL_ARG_MAX"
- tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h i386/sysv4.h i386/sysv4-cpp.h"
- if test x$stabs = xyes
- then
- tm_file="${tm_file} dbx.h"
- fi
- tmake_file="i386/t-crtpic t-svr4"
- extra_parts="crtbegin.o crtend.o"
- ;;
+i[34567]86-*-sysv4*) # Intel 80386's running system V.4
+ xm_defines="POSIX SMALL_ARG_MAX"
+ tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h i386/sysv4.h i386/sysv4-cpp.h"
+ if test x$stabs = xyes
+ then
+ tm_file="${tm_file} dbx.h"
+ fi
+ tmake_file="i386/t-crtpic t-svr4"
+ extra_parts="crtbegin.o crtend.o"
+ ;;
i[34567]86-*-udk*) # Intel x86 on SCO UW/OSR5 Dev Kit
- xm_defines=POSIX
- tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h i386/sysv4.h i386/sysv5.h i386/udk.h"
- tmake_file="i386/t-crtpic i386/t-udk t-svr4"
- extra_parts="crtbegin.o crtend.o"
- install_headers_dir=install-headers-cpio
- ;;
-i[34567]86-*-sysv*) # Intel 80386's running system V
- xm_defines=POSIX
- if test x$gas = xyes
- then
- if test x$stabs = xyes
- then
- tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/svr3gas.h i386/svr3dbx.h"
- tmake_file=i386/t-svr3dbx
- extra_parts="svr3.ifile svr3z.ifile"
- else
- tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/svr3gas.h"
- extra_parts="crtbegin.o crtend.o"
- tmake_file=i386/t-crtstuff
- fi
- else
- tm_file="${tm_file} svr3.h i386/unix.h i386/att.h i386/sysv3.h"
- extra_parts="crtbegin.o crtend.o"
- tmake_file=i386/t-crtstuff
- fi
- tmake_file="$tmake_file i386/t-crtpic"
- ;;
-i386-*-vsta) # Intel 80386's running VSTa kernel
- xm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/xm-vsta.h"
- tm_file="${tm_file} i386/vsta.h"
- ;;
+ xm_defines=POSIX
+ tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h i386/sysv4.h i386/sysv5.h i386/udk.h"
+ tmake_file="i386/t-crtpic i386/t-udk t-svr4"
+ extra_parts="crtbegin.o crtend.o"
+ install_headers_dir=install-headers-cpio
+ ;;
+i[34567]86-*-sysv*) # Intel 80386's running system V
+ xm_defines=POSIX
+ if test x$gas = xyes
+ then
+ if test x$stabs = xyes
+ then
+ tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/svr3gas.h i386/svr3dbx.h"
+ tmake_file=i386/t-svr3dbx
+ extra_parts="svr3.ifile svr3z.ifile"
+ else
+ tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/svr3gas.h"
+ extra_parts="crtbegin.o crtend.o"
+ tmake_file=i386/t-crtstuff
+ fi
+ else
+ tm_file="${tm_file} svr3.h i386/unix.h i386/att.h i386/sysv3.h"
+ extra_parts="crtbegin.o crtend.o"
+ tmake_file=i386/t-crtstuff
+ fi
+ tmake_file="$tmake_file i386/t-crtpic"
+ ;;
+i386-*-vsta) # Intel 80386's running VSTa kernel
+ xm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/xm-vsta.h"
+ tm_file="${tm_file} i386/vsta.h"
+ ;;
i[34567]86-*-win32)
- xm_defines=POSIX
- xm_file=i386/xm-cygwin.h
- tmake_file=i386/t-cygwin
- tm_file="${tm_file} i386/win32.h"
- extra_objs=winnt.o
- if test x$enable_threads = xyes; then
- thread_file='win32'
- fi
- exeext=.exe
- ;;
+ xm_defines=POSIX
+ xm_file=i386/xm-cygwin.h
+ tmake_file=i386/t-cygwin
+ tm_file="${tm_file} i386/win32.h"
+ extra_objs=winnt.o
+ if test x$enable_threads = xyes; then
+ thread_file='win32'
+ fi
+ exeext=.exe
+ ;;
i[34567]86-*-pe | i[34567]86-*-cygwin*)
- xm_defines=POSIX
- xm_file=i386/xm-cygwin.h
- tmake_file=i386/t-cygwin
- tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h dbxcoff.h i386/cygwin.h"
- extra_objs=winnt.o
- if test x$enable_threads = xyes; then
- thread_file='win32'
- fi
- exeext=.exe
- ;;
+ xm_defines=POSIX
+ xm_file=i386/xm-cygwin.h
+ tmake_file=i386/t-cygwin
+ tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h dbxcoff.h i386/cygwin.h"
+ extra_objs=winnt.o
+ if test x$enable_threads = xyes; then
+ thread_file='win32'
+ fi
+ exeext=.exe
+ ;;
i[34567]86-*-mingw32*)
- tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h dbxcoff.h i386/cygwin.h i386/mingw32.h"
- xm_defines=POSIX
- xm_file=i386/xm-mingw32.h
- tmake_file="i386/t-cygwin i386/t-mingw32"
- extra_objs=winnt.o
- if test x$enable_threads = xyes; then
- thread_file='win32'
- fi
- exeext=.exe
- case $machine in
- *mingw32crt*)
- tm_file="${tm_file} i386/crtdll.h"
- ;;
- *minwg32msv* | *mingw32*)
- ;;
- esac
- ;;
+ tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h dbxcoff.h i386/cygwin.h i386/mingw32.h"
+ xm_defines=POSIX
+ xm_file=i386/xm-mingw32.h
+ tmake_file="i386/t-cygwin i386/t-mingw32"
+ extra_objs=winnt.o
+ if test x$enable_threads = xyes; then
+ thread_file='win32'
+ fi
+ exeext=.exe
+ case $machine in
+ *mingw32crt*)
+ tm_file="${tm_file} i386/crtdll.h"
+ ;;
+ *minwg32msv* | *mingw32*)
+ ;;
+ esac
+ ;;
i[34567]86-*-uwin*)
- tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h dbxcoff.h i386/cygwin.h i386/uwin.h"
- tmake_file="i386/t-cygwin i386/t-uwin"
- extra_objs=winnt.o
- if test x$enable_threads = xyes; then
- thread_file='win32'
- fi
- exeext=.exe
- ;;
+ tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h dbxcoff.h i386/cygwin.h i386/uwin.h"
+ tmake_file="i386/t-cygwin i386/t-uwin"
+ extra_objs=winnt.o
+ if test x$enable_threads = xyes; then
+ thread_file='win32'
+ fi
+ exeext=.exe
+ ;;
i[34567]86-*-interix3*)
- tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/i386-interix.h i386/i386-interix3.h interix.h interix3.h"
- xm_defines=POSIX
- tmake_file="t-interix i386/t-interix"
- extra_objs=winnt.o
- xmake_file="x-interix"
- if test x$enable_threads = xyes ; then
- thread_file='posix'
- fi
- if test x$stabs = xyes ; then
- tm_file="${tm_file} dbxcoff.h"
- fi
- ;;
+ tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/i386-interix.h i386/i386-interix3.h interix.h interix3.h"
+ xm_defines=POSIX
+ tmake_file="t-interix i386/t-interix"
+ extra_objs=winnt.o
+ xmake_file="x-interix"
+ if test x$enable_threads = xyes ; then
+ thread_file='posix'
+ fi
+ if test x$stabs = xyes ; then
+ tm_file="${tm_file} dbxcoff.h"
+ fi
+ ;;
i[34567]86-*-interix*)
- tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/i386-interix.h interix.h"
- xm_defines=POSIX
- tmake_file="t-interix i386/t-interix"
- extra_objs=winnt.o
- if test x$enable_threads = xyes ; then
- thread_file='posix'
- fi
- if test x$stabs = xyes ; then
- tm_file="${tm_file} dbxcoff.h"
- fi
- ;;
+ tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/i386-interix.h interix.h"
+ xm_defines=POSIX
+ tmake_file="t-interix i386/t-interix"
+ extra_objs=winnt.o
+ if test x$enable_threads = xyes ; then
+ thread_file='posix'
+ fi
+ if test x$stabs = xyes ; then
+ tm_file="${tm_file} dbxcoff.h"
+ fi
+ ;;
i960-*-coff*)
- tm_file="${tm_file} dbxcoff.h i960/i960-coff.h libgloss.h"
- tmake_file=i960/t-960bare
- c_target_objs="i960-c.o"
- cxx_target_objs="i960-c.o"
- ;;
+ tm_file="${tm_file} dbxcoff.h i960/i960-coff.h libgloss.h"
+ tmake_file=i960/t-960bare
+ c_target_objs="i960-c.o"
+ cxx_target_objs="i960-c.o"
+ ;;
i960-*-rtems)
- xm_defines=POSIX
- tmake_file="i960/t-960bare t-rtems"
- tm_file="${tm_file} dbxcoff.h i960/i960-coff.h i960/rtems.h rtems.h"
- if test x$enable_threads = xyes; then
- thread_file='rtems'
- fi
- c_target_objs="i960-c.o"
- cxx_target_objs="i960-c.o"
- ;;
-i960-*-*) # Default i960 environment.
- use_collect2=yes
- tmake_file=i960/t-960bare
- c_target_objs="i960-c.o"
- cxx_target_objs="i960-c.o"
- ;;
+ xm_defines=POSIX
+ tmake_file="i960/t-960bare t-rtems"
+ tm_file="${tm_file} dbxcoff.h i960/i960-coff.h i960/rtems.h rtems.h"
+ if test x$enable_threads = xyes; then
+ thread_file='rtems'
+ fi
+ c_target_objs="i960-c.o"
+ cxx_target_objs="i960-c.o"
+ ;;
+i960-*-*) # Default i960 environment.
+ use_collect2=yes
+ tmake_file=i960/t-960bare
+ c_target_objs="i960-c.o"
+ cxx_target_objs="i960-c.o"
+ ;;
ia64*-*-elf*)
- tm_file="${tm_file} dbxelf.h elfos.h ia64/sysv4.h ia64/elf.h"
- tmake_file="ia64/t-ia64"
- target_cpu_default="0"
- if test x$gas = xyes
- then
- target_cpu_default="${target_cpu_default}|MASK_GNU_AS"
- fi
- if test x$gnu_ld = xyes
- then
- target_cpu_default="${target_cpu_default}|MASK_GNU_LD"
- fi
- extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtfastmath.o"
- ;;
+ tm_file="${tm_file} dbxelf.h elfos.h ia64/sysv4.h ia64/elf.h"
+ tmake_file="ia64/t-ia64"
+ target_cpu_default="0"
+ if test x$gas = xyes
+ then
+ target_cpu_default="${target_cpu_default}|MASK_GNU_AS"
+ fi
+ if test x$gnu_ld = xyes
+ then
+ target_cpu_default="${target_cpu_default}|MASK_GNU_LD"
+ fi
+ extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtfastmath.o"
+ ;;
ia64*-*-freebsd*)
- tm_file="${tm_file} dbxelf.h elfos.h ${fbsd_tm_file} ia64/sysv4.h ia64/freebsd.h"
- target_cpu_default="MASK_GNU_AS|MASK_GNU_LD"
- tmake_file="${tmake_file} ia64/t-ia64"
- extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtfastmath.o"
- ;;
+ tm_file="${tm_file} dbxelf.h elfos.h ${fbsd_tm_file} ia64/sysv4.h ia64/freebsd.h"
+ target_cpu_default="MASK_GNU_AS|MASK_GNU_LD"
+ tmake_file="${tmake_file} ia64/t-ia64"
+ extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtfastmath.o"
+ ;;
ia64*-*-linux*)
- tm_file="${tm_file} dbxelf.h elfos.h svr4.h linux.h ia64/sysv4.h ia64/linux.h"
- tmake_file="t-slibgcc-elf-ver t-linux ia64/t-ia64 ia64/t-glibc"
- target_cpu_default="MASK_GNU_AS|MASK_GNU_LD"
- extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtfastmath.o"
- if test x"$use_libunwind_exceptions" = xyes; then
- tmake_file="$tmake_file t-libunwind"
- fi
- ;;
+ tm_file="${tm_file} dbxelf.h elfos.h svr4.h linux.h ia64/sysv4.h ia64/linux.h"
+ tmake_file="t-slibgcc-elf-ver t-linux ia64/t-ia64 ia64/t-glibc"
+ target_cpu_default="MASK_GNU_AS|MASK_GNU_LD"
+ extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtfastmath.o"
+ if test x"$use_libunwind_exceptions" = xyes; then
+ tmake_file="$tmake_file t-libunwind"
+ fi
+ ;;
ia64*-*-hpux*)
- tm_file="${tm_file} dbxelf.h elfos.h svr4.h ia64/sysv4.h ia64/hpux.h ia64/hpux_longdouble.h"
- tmake_file="ia64/t-ia64 ia64/t-hpux"
- target_cpu_default="MASK_GNU_AS"
- if test x$enable_threads = xyes; then
- thread_file='posix'
- fi
- use_collect2=no
- c_target_objs="ia64-c.o"
- cxx_target_objs="ia64-c.o"
- ;;
+ tm_file="${tm_file} dbxelf.h elfos.h svr4.h ia64/sysv4.h ia64/hpux.h ia64/hpux_longdouble.h"
+ tmake_file="ia64/t-ia64 ia64/t-hpux"
+ target_cpu_default="MASK_GNU_AS"
+ if test x$enable_threads = xyes; then
+ thread_file='posix'
+ fi
+ use_collect2=no
+ c_target_objs="ia64-c.o"
+ cxx_target_objs="ia64-c.o"
+ ;;
ip2k-*-elf)
- ;;
+ ;;
m32r-*-elf*)
- tm_file="dbxelf.h elfos.h svr4.h ${tm_file}"
- extra_parts="crtinit.o crtfini.o"
- ;;
+ tm_file="dbxelf.h elfos.h svr4.h ${tm_file}"
+ extra_parts="crtinit.o crtfini.o"
+ ;;
# m68hc11 and m68hc12 share the same machine description.
m68hc11-*-*|m6811-*-*)
- tm_file="dbxelf.h elfos.h m68hc11/m68hc11.h"
- tm_p_file="m68hc11/m68hc11-protos.h"
- md_file="m68hc11/m68hc11.md"
- out_file="m68hc11/m68hc11.c"
- tmake_file="m68hc11/t-m68hc11-gas"
+ tm_file="dbxelf.h elfos.h m68hc11/m68hc11.h"
+ tm_p_file="m68hc11/m68hc11-protos.h"
+ md_file="m68hc11/m68hc11.md"
+ out_file="m68hc11/m68hc11.c"
+ tmake_file="m68hc11/t-m68hc11-gas"
;;
m68hc12-*-*|m6812-*-*)
- tm_file="m68hc11/m68hc12.h dbxelf.h elfos.h m68hc11/m68hc11.h"
- tm_p_file="m68hc11/m68hc11-protos.h"
- md_file="m68hc11/m68hc11.md"
- out_file="m68hc11/m68hc11.c"
- tmake_file="m68hc11/t-m68hc11-gas"
+ tm_file="m68hc11/m68hc12.h dbxelf.h elfos.h m68hc11/m68hc11.h"
+ tm_p_file="m68hc11/m68hc11-protos.h"
+ md_file="m68hc11/m68hc11.md"
+ out_file="m68hc11/m68hc11.c"
+ tmake_file="m68hc11/t-m68hc11-gas"
;;
-m68000-hp-bsd*) # HP 9000/200 running BSD
- tm_file=m68k/hp2bsd.h
- use_collect2=yes
- ;;
-m68000-hp-hpux*) # HP 9000 series 300
- xm_defines=POSIX
- if test x$gas = xyes
- then
- tm_file=m68k/hp310g.h
- else
- tm_file=m68k/hp310.h
- fi
- tmake_file=m68k/t-hp320
- install_headers_dir=install-headers-cpio
- use_collect2=yes
- ;;
+m68000-hp-bsd*) # HP 9000/200 running BSD
+ tm_file=m68k/hp2bsd.h
+ use_collect2=yes
+ ;;
+m68000-hp-hpux*) # HP 9000 series 300
+ xm_defines=POSIX
+ if test x$gas = xyes
+ then
+ tm_file=m68k/hp310g.h
+ else
+ tm_file=m68k/hp310.h
+ fi
+ tmake_file=m68k/t-hp320
+ install_headers_dir=install-headers-cpio
+ use_collect2=yes
+ ;;
m68000-sun-sunos3*)
- tm_file=m68k/sun2.h
- use_collect2=yes
- ;;
+ tm_file=m68k/sun2.h
+ use_collect2=yes
+ ;;
m68000-sun-sunos4*)
- tm_file=m68k/sun2o4.h
- use_collect2=yes
- ;;
+ tm_file=m68k/sun2o4.h
+ use_collect2=yes
+ ;;
m68000-att-sysv*)
- xm_defines=POSIX
- if test x$gas = xyes
- then
- tm_file=m68k/3b1g.h
- else
- tm_file=m68k/3b1.h
- fi
- use_collect2=yes
- ;;
+ xm_defines=POSIX
+ if test x$gas = xyes
+ then
+ tm_file=m68k/3b1g.h
+ else
+ tm_file=m68k/3b1.h
+ fi
+ use_collect2=yes
+ ;;
m68k-atari-sysv4*) # Atari variant of V.4.
- tm_file=m68k/atari.h
- xm_defines=POSIX
- tmake_file=t-svr4
- extra_parts="crtbegin.o crtend.o"
- ;;
+ tm_file=m68k/atari.h
+ xm_defines=POSIX
+ tmake_file=t-svr4
+ extra_parts="crtbegin.o crtend.o"
+ ;;
m68k-apollo-sysv* | m68k-bull-sysv*)
- # can otherwise be caught by m68k-*-sysv4*
- echo "*** Configuration $machine not supported" 1>&2
- exit 1
- ;;
+ # can otherwise be caught by m68k-*-sysv4*
+ echo "*** Configuration $machine not supported" 1>&2
+ exit 1
+ ;;
m68k-motorola-sysv*)
- tm_file=m68k/mot3300.h
- xm_defines=POSIX
- if test x$gas = xyes
- then
- if test x$gnu_ld = xyes
- then
- tmake_file=m68k/t-mot3300-gald
- else
- tmake_file=m68k/t-mot3300-gas
- use_collect2=yes
- fi
- else
- if test x$gnu_ld = xyes
- then
- tmake_file=m68k/t-mot3300-gld
- else
- tmake_file=m68k/t-mot3300
- use_collect2=yes
- fi
- fi
- gdb_needs_out_file_path=yes
- extra_parts="crt0.o mcrt0.o"
- ;;
-m68k-ncr-sysv*) # NCR Tower 32 SVR3
- tm_file=m68k/tower-as.h
- xm_defines=POSIX
- extra_parts="crtbegin.o crtend.o"
- ;;
+ tm_file=m68k/mot3300.h
+ xm_defines=POSIX
+ if test x$gas = xyes
+ then
+ if test x$gnu_ld = xyes
+ then
+ tmake_file=m68k/t-mot3300-gald
+ else
+ tmake_file=m68k/t-mot3300-gas
+ use_collect2=yes
+ fi
+ else
+ if test x$gnu_ld = xyes
+ then
+ tmake_file=m68k/t-mot3300-gld
+ else
+ tmake_file=m68k/t-mot3300
+ use_collect2=yes
+ fi
+ fi
+ gdb_needs_out_file_path=yes
+ extra_parts="crt0.o mcrt0.o"
+ ;;
+m68k-ncr-sysv*) # NCR Tower 32 SVR3
+ tm_file=m68k/tower-as.h
+ xm_defines=POSIX
+ extra_parts="crtbegin.o crtend.o"
+ ;;
m68k-plexus-sysv*)
- tm_file=m68k/plexus.h
- xm_defines=POSIX
- use_collect2=yes
- ;;
+ tm_file=m68k/plexus.h
+ xm_defines=POSIX
+ use_collect2=yes
+ ;;
m68k-tti-*)
- tm_file=m68k/pbb.h
- xm_defines=POSIX
- ;;
+ tm_file=m68k/pbb.h
+ xm_defines=POSIX
+ ;;
m68k-crds-unos*)
- xm_defines=POSIX
- tm_file=m68k/crds.h
- use_collect2=yes
- ;;
-m68k-cbm-sysv4*) # Commodore variant of V.4.
- tm_file=m68k/amix.h
- xm_defines=POSIX
- tmake_file=t-svr4
- extra_parts="crtbegin.o crtend.o"
- ;;
+ xm_defines=POSIX
+ tm_file=m68k/crds.h
+ use_collect2=yes
+ ;;
+m68k-cbm-sysv4*) # Commodore variant of V.4.
+ tm_file=m68k/amix.h
+ xm_defines=POSIX
+ tmake_file=t-svr4
+ extra_parts="crtbegin.o crtend.o"
+ ;;
m68k-ccur-rtu)
- tm_file=m68k/ccur-GAS.h
- use_collect2=yes
- ;;
-m68k-hp-bsd4.4*) # HP 9000/3xx running 4.4bsd
- tm_file=m68k/hp3bsd44.h
- use_collect2=yes
- ;;
-m68k-hp-bsd*) # HP 9000/3xx running Berkeley Unix
- tm_file=m68k/hp3bsd.h
- use_collect2=yes
- ;;
-m68k-hp-hpux7*) # HP 9000 series 300 running HPUX version 7.
- xm_defines=POSIX
- if test x$gas = xyes
- then
- xmake_file=m68k/x-hp320g
- tm_file=m68k/hp320g.h
- else
- xmake_file=m68k/x-hp320
- tm_file=m68k/hpux7.h
- fi
- install_headers_dir=install-headers-cpio
- use_collect2=yes
- ;;
-m68k-hp-hpux*) # HP 9000 series 300
- xm_defines=POSIX
- if test x$gas = xyes
- then
- xmake_file=m68k/x-hp320g
- tm_file=m68k/hp320g.h
- else
- xmake_file=m68k/x-hp320
- tm_file=m68k/hp320.h
- fi
- install_headers_dir=install-headers-cpio
- use_collect2=yes
- ;;
+ tm_file=m68k/ccur-GAS.h
+ use_collect2=yes
+ ;;
+m68k-hp-bsd4.4*) # HP 9000/3xx running 4.4bsd
+ tm_file=m68k/hp3bsd44.h
+ use_collect2=yes
+ ;;
+m68k-hp-bsd*) # HP 9000/3xx running Berkeley Unix
+ tm_file=m68k/hp3bsd.h
+ use_collect2=yes
+ ;;
+m68k-hp-hpux7*) # HP 9000 series 300 running HPUX version 7.
+ xm_defines=POSIX
+ if test x$gas = xyes
+ then
+ xmake_file=m68k/x-hp320g
+ tm_file=m68k/hp320g.h
+ else
+ xmake_file=m68k/x-hp320
+ tm_file=m68k/hpux7.h
+ fi
+ install_headers_dir=install-headers-cpio
+ use_collect2=yes
+ ;;
+m68k-hp-hpux*) # HP 9000 series 300
+ xm_defines=POSIX
+ if test x$gas = xyes
+ then
+ xmake_file=m68k/x-hp320g
+ tm_file=m68k/hp320g.h
+ else
+ xmake_file=m68k/x-hp320
+ tm_file=m68k/hp320.h
+ fi
+ install_headers_dir=install-headers-cpio
+ use_collect2=yes
+ ;;
m68k-sun-mach*)
- tm_file=m68k/sun3mach.h
- use_collect2=yes
- ;;
+ tm_file=m68k/sun3mach.h
+ use_collect2=yes
+ ;;
m68k-sun-sunos3*)
- if test x$with_fp = xno
- then
- tm_file=m68k/sun3n3.h
- else
- tm_file=m68k/sun3o3.h
- fi
- use_collect2=yes
- ;;
-m68k-sun-sunos*) # For SunOS 4 (the default).
- if test x$with_fp = xno
- then
- tm_file=m68k/sun3n.h
- else
- tm_file=m68k/sun3.h
- fi
- use_collect2=yes
- ;;
+ if test x$with_fp = xno
+ then
+ tm_file=m68k/sun3n3.h
+ else
+ tm_file=m68k/sun3o3.h
+ fi
+ use_collect2=yes
+ ;;
+m68k-sun-sunos*) # For SunOS 4 (the default).
+ if test x$with_fp = xno
+ then
+ tm_file=m68k/sun3n.h
+ else
+ tm_file=m68k/sun3.h
+ fi
+ use_collect2=yes
+ ;;
m68k-*-aout*)
- tmake_file=m68k/t-m68kbare
- tm_file="m68k/m68k-aout.h libgloss.h"
- ;;
+ tmake_file=m68k/t-m68kbare
+ tm_file="m68k/m68k-aout.h libgloss.h"
+ ;;
m68k-*-coff*)
- tmake_file=m68k/t-m68kbare
- tm_file="m68k/m68k-coff.h dbx.h"
- ;;
+ tmake_file=m68k/t-m68kbare
+ tm_file="m68k/m68k-coff.h dbx.h"
+ ;;
m68020-*-elf* | m68k-*-elf*)
- tm_file="m68k/m68k-none.h m68k/m68kelf.h dbxelf.h elfos.h m68k/m68kemb.h m68k/m68020-elf.h"
- xm_defines=POSIX
- tmake_file=m68k/t-m68kelf
- extra_parts="crtbegin.o crtend.o"
- ;;
+ tm_file="m68k/m68k-none.h m68k/m68kelf.h dbxelf.h elfos.h m68k/m68kemb.h m68k/m68020-elf.h"
+ xm_defines=POSIX
+ tmake_file=m68k/t-m68kelf
+ extra_parts="crtbegin.o crtend.o"
+ ;;
m68010-*-netbsdelf* | m68k*-*-netbsdelf*)
- tm_file="${tm_file} dbxelf.h elfos.h netbsd.h netbsd-elf.h m68k/netbsd-elf.h"
- case $machine in
- m68010*)
- target_cpu_default="0"
- ;;
- *)
- target_cpu_default="MASK_68020|MASK_68881|MASK_BITFIELD"
- ;;
- esac
- ;;
+ tm_file="${tm_file} dbxelf.h elfos.h netbsd.h netbsd-elf.h m68k/netbsd-elf.h"
+ case $machine in
+ m68010*)
+ target_cpu_default="0"
+ ;;
+ *)
+ target_cpu_default="MASK_68020|MASK_68881|MASK_BITFIELD"
+ ;;
+ esac
+ ;;
m68k*-*-netbsd*)
- tm_file=m68k/netbsd.h
- tmake_file=t-netbsd
- extra_parts=""
- use_collect2=yes
- ;;
+ tm_file=m68k/netbsd.h
+ tmake_file=t-netbsd
+ extra_parts=""
+ use_collect2=yes
+ ;;
m68k*-*-openbsd*)
- # needed to unconfuse gdb
- tmake_file="t-libc-ok t-openbsd m68k/t-openbsd"
- # we need collect2 until our bug is fixed...
- use_collect2=yes
- ;;
-m68k-*-sysv4*) # Motorola m68k's running system V.4
- tm_file=m68k/m68kv4.h
- xm_defines=POSIX
- tmake_file=t-svr4
- extra_parts="crtbegin.o crtend.o"
- ;;
-m68k-*-linux*aout*) # Motorola m68k's running GNU/Linux
- # with a.out format
- tm_file=m68k/linux-aout.h
- tmake_file="t-linux-aout"
- gnu_ld=yes
- ;;
-m68k-*-linux*libc1) # Motorola m68k's running GNU/Linux
- # with ELF format using the
- # GNU/Linux C library 5
- tm_file=m68k/linux.h
- tmake_file="t-slibgcc-elf-ver t-linux t-linux-gnulibc1"
- extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
- gnu_ld=yes
- ;;
-m68k-*-linux*) # Motorola m68k's running GNU/Linux
- # with ELF format using glibc 2
- # aka the GNU/Linux C library 6.
- tm_file=m68k/linux.h
- tmake_file="t-slibgcc-elf-ver t-linux"
- ;;
+ # needed to unconfuse gdb
+ tmake_file="t-libc-ok t-openbsd m68k/t-openbsd"
+ # we need collect2 until our bug is fixed...
+ use_collect2=yes
+ ;;
+m68k-*-sysv4*) # Motorola m68k's running system V.4
+ tm_file=m68k/m68kv4.h
+ xm_defines=POSIX
+ tmake_file=t-svr4
+ extra_parts="crtbegin.o crtend.o"
+ ;;
+m68k-*-linux*aout*) # Motorola m68k's running GNU/Linux
+ # with a.out format
+ tm_file=m68k/linux-aout.h
+ tmake_file="t-linux-aout"
+ gnu_ld=yes
+ ;;
+m68k-*-linux*libc1) # Motorola m68k's running GNU/Linux
+ # with ELF format using the
+ # GNU/Linux C library 5
+ tm_file=m68k/linux.h
+ tmake_file="t-slibgcc-elf-ver t-linux t-linux-gnulibc1"
+ extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
+ gnu_ld=yes
+ ;;
+m68k-*-linux*) # Motorola m68k's running GNU/Linux
+ # with ELF format using glibc 2
+ # aka the GNU/Linux C library 6.
+ tm_file=m68k/linux.h
+ tmake_file="t-slibgcc-elf-ver t-linux"
+ ;;
m68k-*-psos*)
- tmake_file=m68k/t-m68kbare
- tm_file=m68k/m68k-psos.h
- ;;
-m68k-*-rtemscoff*) # would otherwise be caught by m68k-*-rtems*
- echo "*** Configuration $machine not supported" 1>&2
- exit 1
- ;;
+ tmake_file=m68k/t-m68kbare
+ tm_file=m68k/m68k-psos.h
+ ;;
+m68k-*-rtemscoff*) # would otherwise be caught by m68k-*-rtems*
+ echo "*** Configuration $machine not supported" 1>&2
+ exit 1
+ ;;
m68k-*-rtems*)
- xm_defines=POSIX
- tmake_file="m68k/t-m68kbare t-rtems m68k/t-crtstuff"
- tm_file="m68k/m68k-none.h m68k/m68kelf.h dbxelf.h elfos.h m68k/m68kemb.h m68k/m68020-elf.h m68k/rtemself.h rtems.h"
- extra_parts="crtbegin.o crtend.o"
- if test x$enable_threads = xyes; then
- thread_file='rtems'
- fi
- ;;
+ xm_defines=POSIX
+ tmake_file="m68k/t-m68kbare t-rtems m68k/t-crtstuff"
+ tm_file="m68k/m68k-none.h m68k/m68kelf.h dbxelf.h elfos.h m68k/m68kemb.h m68k/m68020-elf.h m68k/rtemself.h rtems.h"
+ extra_parts="crtbegin.o crtend.o"
+ if test x$enable_threads = xyes; then
+ thread_file='rtems'
+ fi
+ ;;
m88k-*-aout*)
- xm_defines=POSIX
- tm_file=m88k/m88k-aout.h
- ;;
+ xm_defines=POSIX
+ tm_file=m88k/m88k-aout.h
+ ;;
m88k-*-openbsd*)
- tmake_file="${tmake_file} m88k/t-luna-gas"
- tm_file="m88k/aout-dbx.h aoutos.h m88k/m88k.h openbsd.h ${tm_file}"
- ;;
+ tmake_file="${tmake_file} m88k/t-luna-gas"
+ tm_file="m88k/aout-dbx.h aoutos.h m88k/m88k.h openbsd.h ${tm_file}"
+ ;;
m88k-*-sysv4*)
- xm_defines=POSIX
- tm_file="dbxelf.h elfos.h svr4.h m88k/sysv4.h"
- extra_parts="crtbegin.o crtend.o"
- tmake_file=m88k/t-sysv4
- ;;
+ xm_defines=POSIX
+ tm_file="dbxelf.h elfos.h svr4.h m88k/sysv4.h"
+ extra_parts="crtbegin.o crtend.o"
+ tmake_file=m88k/t-sysv4
+ ;;
mcore-*-elf)
- tm_file="dbxelf.h elfos.h svr4.h ${tm_file} mcore/mcore-elf.h"
- tmake_file=mcore/t-mcore
- ;;
+ tm_file="dbxelf.h elfos.h svr4.h ${tm_file} mcore/mcore-elf.h"
+ tmake_file=mcore/t-mcore
+ ;;
mcore-*-pe*)
- tm_file=mcore/mcore-pe.h
- tmake_file=mcore/t-mcore-pe
- ;;
-mips-sgi-irix6*o32) # SGI System V.4., IRIX 6, O32 ABI
- if test x$gas = xyes
- then
- tm_file="mips/iris5.h mips/iris5gas.h mips/iris6-o32-gas.h"
- if test x$stabs = xyes
- then
- tm_file="${tm_file} dbx.h"
- fi
- tmake_file=mips/t-iris5-gas
- else
- tm_file="mips/iris5.h mips/iris6-o32-as.h"
- tmake_file=mips/t-iris5-as
- fi
- tm_file="${tm_file} mips/iris6-o32.h"
- tmake_file="${tmake_file} mips/t-iris mips/t-iris5-6"
- xm_defines=POSIX
- xm_file=mips/xm-iris5.h
- # mips-tfile doesn't work yet
- # See comment in mips/iris5.h file.
- use_collect2=yes
-# if test x$enable_threads = xyes; then
-# thread_file='irix'
-# fi
- ;;
-mips-sgi-irix6*) # SGI System V.4., IRIX 6
- if test "x$gnu_ld" = xyes
- then
- tm_file="mips/iris6.h mips/iris6gld.h"
- else
- tm_file=mips/iris6.h
- fi
- tmake_file="mips/t-iris mips/t-iris5-6 mips/t-iris6"
- xm_defines=POSIX
-# if test x$enable_threads = xyes; then
-# thread_file='irix'
-# fi
- ;;
-mips-sgi-irix5cross64) # Irix5 host, Irix 6 target, cross64
- tm_file="mips/iris6.h mips/cross64.h"
- xm_defines=POSIX
- xm_file=mips/xm-iris5.h
- tmake_file="mips/t-iris mips/t-cross64"
- # See comment in mips/iris[56].h files.
- use_collect2=yes
-# if test x$enable_threads = xyes; then
-# thread_file='irix'
-# fi
- ;;
+ tm_file=mcore/mcore-pe.h
+ tmake_file=mcore/t-mcore-pe
+ ;;
+mips-sgi-irix6*o32) # SGI System V.4., IRIX 6, O32 ABI
+ if test x$gas = xyes
+ then
+ tm_file="mips/iris5.h mips/iris5gas.h mips/iris6-o32-gas.h"
+ if test x$stabs = xyes
+ then
+ tm_file="${tm_file} dbx.h"
+ fi
+ tmake_file=mips/t-iris5-gas
+ else
+ tm_file="mips/iris5.h mips/iris6-o32-as.h"
+ tmake_file=mips/t-iris5-as
+ fi
+ tm_file="${tm_file} mips/iris6-o32.h"
+ tmake_file="${tmake_file} mips/t-iris mips/t-iris5-6"
+ xm_defines=POSIX
+ xm_file=mips/xm-iris5.h
+ # mips-tfile doesn't work yet
+ # See comment in mips/iris5.h file.
+ use_collect2=yes
+# if test x$enable_threads = xyes; then
+# thread_file='irix'
+# fi
+ ;;
+mips-sgi-irix6*) # SGI System V.4., IRIX 6
+ if test "x$gnu_ld" = xyes
+ then
+ tm_file="mips/iris6.h mips/iris6gld.h"
+ else
+ tm_file=mips/iris6.h
+ fi
+ tmake_file="mips/t-iris mips/t-iris5-6 mips/t-iris6"
+ xm_defines=POSIX
+# if test x$enable_threads = xyes; then
+# thread_file='irix'
+# fi
+ ;;
+mips-sgi-irix5cross64) # Irix5 host, Irix 6 target, cross64
+ tm_file="mips/iris6.h mips/cross64.h"
+ xm_defines=POSIX
+ xm_file=mips/xm-iris5.h
+ tmake_file="mips/t-iris mips/t-cross64"
+ # See comment in mips/iris[56].h files.
+ use_collect2=yes
+# if test x$enable_threads = xyes; then
+# thread_file='irix'
+# fi
+ ;;
mips-sni-sysv4)
- if test x$gas = xyes
- then
- if test x$stabs = xyes
- then
- tm_file=mips/iris5gdb.h
- else
- tm_file="mips/sni-svr4.h mips/sni-gas.h"
- fi
- else
- tm_file=mips/sni-svr4.h
- fi
- xm_defines=POSIX
+ if test x$gas = xyes
+ then
+ if test x$stabs = xyes
+ then
+ tm_file=mips/iris5gdb.h
+ else
+ tm_file="mips/sni-svr4.h mips/sni-gas.h"
+ fi
+ else
+ tm_file=mips/sni-svr4.h
+ fi
+ xm_defines=POSIX
if test x$gnu_ld != xyes
then
use_collect2=yes
fi
;;
-mips-sgi-irix5*) # SGI System V.4., IRIX 5
- if test x$gas = xyes
- then
- tm_file="mips/iris5.h mips/iris5gas.h"
- if test x$stabs = xyes
- then
- tm_file="${tm_file} dbx.h"
- fi
- tmake_file=mips/t-iris5-gas
- else
- tm_file=mips/iris5.h
- tmake_file=mips/t-iris5-as
- fi
- tmake_file="${tmake_file} mips/t-iris mips/t-iris5-6"
- xm_defines=POSIX
- xm_file=mips/xm-iris5.h
- # mips-tfile doesn't work yet
- # See comment in mips/iris5.h file.
- use_collect2=yes
-# if test x$enable_threads = xyes; then
-# thread_file='irix'
-# fi
- ;;
-mips-sgi-*) # would otherwise be caught by mips-*-elf*
- echo "*** Configuration $machine not supported" 1>&2
- exit 1
- ;;
-mips*-*-netbsd*) # NetBSD/mips, either endian.
- target_cpu_default="MASK_GAS|MASK_ABICALLS"
- tm_file="elfos.h ${tm_file} mips/netbsd.h"
- tmake_file="${tmake_file}"
- ;;
+mips-sgi-irix5*) # SGI System V.4., IRIX 5
+ if test x$gas = xyes
+ then
+ tm_file="mips/iris5.h mips/iris5gas.h"
+ if test x$stabs = xyes
+ then
+ tm_file="${tm_file} dbx.h"
+ fi
+ tmake_file=mips/t-iris5-gas
+ else
+ tm_file=mips/iris5.h
+ tmake_file=mips/t-iris5-as
+ fi
+ tmake_file="${tmake_file} mips/t-iris mips/t-iris5-6"
+ xm_defines=POSIX
+ xm_file=mips/xm-iris5.h
+ # mips-tfile doesn't work yet
+ # See comment in mips/iris5.h file.
+ use_collect2=yes
+# if test x$enable_threads = xyes; then
+# thread_file='irix'
+# fi
+ ;;
+mips-sgi-*) # would otherwise be caught by mips-*-elf*
+ echo "*** Configuration $machine not supported" 1>&2
+ exit 1
+ ;;
+mips*-*-netbsd*) # NetBSD/mips, either endian.
+ target_cpu_default="MASK_GAS|MASK_ABICALLS"
+ tm_file="elfos.h ${tm_file} mips/netbsd.h"
+ tmake_file="${tmake_file}"
+ ;;
mips64*-*-linux*)
- tm_file="dbxelf.h elfos.h svr4.h linux.h ${tm_file} mips/linux.h mips/linux64.h"
- tmake_file="t-slibgcc-elf-ver t-linux mips/t-linux mips/t-linux64"
+ tm_file="dbxelf.h elfos.h svr4.h linux.h ${tm_file} mips/linux.h mips/linux64.h"
+ tmake_file="t-slibgcc-elf-ver t-linux mips/t-linux mips/t-linux64"
- # This default ABI is a partial lie: t-linux64 overrides the
- # DRIVER_SELF_SPEC that sets the default abi, in the spec file
- # that is installed. What GCC thinks of as the default must
- # remain as ABI_32 such that the SONAMEs of the libgcc shared
- # libraries remain compatible with those of mips-linux-gnu.
- tm_defines="MIPS_ISA_DEFAULT=1 MIPS_ABI_DEFAULT=ABI_32"
- target_cpu_default="MASK_ABICALLS|MASK_FLOAT64|MASK_64BIT"
- extra_parts="crtbegin.o crtbeginS.o crtbeginT.o crtend.o crtendS.o"
- gnu_ld=yes
- gas=yes
- if test x$enable_threads = xyes; then
- thread_file='posix'
- fi
- ;;
-mips*-*-linux*) # Linux MIPS, either endian.
+ # This default ABI is a partial lie: t-linux64 overrides the
+ # DRIVER_SELF_SPEC that sets the default abi, in the spec file
+ # that is installed. What GCC thinks of as the default must
+ # remain as ABI_32 such that the SONAMEs of the libgcc shared
+ # libraries remain compatible with those of mips-linux-gnu.
+ tm_defines="MIPS_ISA_DEFAULT=1 MIPS_ABI_DEFAULT=ABI_32"
+ target_cpu_default="MASK_ABICALLS|MASK_FLOAT64|MASK_64BIT"
+ extra_parts="crtbegin.o crtbeginS.o crtbeginT.o crtend.o crtendS.o"
+ gnu_ld=yes
+ gas=yes
+ if test x$enable_threads = xyes; then
+ thread_file='posix'
+ fi
+ ;;
+mips*-*-linux*) # Linux MIPS, either endian.
tm_file="dbxelf.h elfos.h svr4.h linux.h ${tm_file} mips/linux.h"
- case $machine in
+ case $machine in
mipsisa32*-*)
target_cpu_default="MASK_SOFT_FLOAT"
- tm_defines="MIPS_ISA_DEFAULT=32"
+ tm_defines="MIPS_ISA_DEFAULT=32"
;;
esac
- tmake_file="t-slibgcc-elf-ver t-linux"
- ;;
-mips*el-*-openbsd*) # mips little endian
- target_cpu_default="MASK_GAS|MASK_ABICALLS"
- ;;
-mips*-*-openbsd*) # mips big endian
- target_cpu_default="MASK_GAS|MASK_ABICALLS"
- tm_file="mips/openbsd-be.h ${tm_file}"
- ;;
+ tmake_file="t-slibgcc-elf-ver t-linux"
+ ;;
+mips*el-*-openbsd*) # mips little endian
+ target_cpu_default="MASK_GAS|MASK_ABICALLS"
+ ;;
+mips*-*-openbsd*) # mips big endian
+ target_cpu_default="MASK_GAS|MASK_ABICALLS"
+ tm_file="mips/openbsd-be.h ${tm_file}"
+ ;;
mips-*-ecoff* | mipsel-*-ecoff*)
- if test x$stabs = xyes; then
- tm_file="${tm_file} dbx.h"
- fi
- tmake_file=mips/t-ecoff
- ;;
+ if test x$stabs = xyes; then
+ tm_file="${tm_file} dbx.h"
+ fi
+ tmake_file=mips/t-ecoff
+ ;;
mipsisa32-*-elf* | mipsisa32el-*-elf*)
- tm_file="${tm_file} mips/elf.h"
- tmake_file=mips/t-isa3264
- tm_defines="MIPS_ISA_DEFAULT=32 MIPS_ABI_DEFAULT=ABI_EABI"
- ;;
+ tm_file="${tm_file} mips/elf.h"
+ tmake_file=mips/t-isa3264
+ tm_defines="MIPS_ISA_DEFAULT=32 MIPS_ABI_DEFAULT=ABI_EABI"
+ ;;
mipsisa32r2-*-elf* | mipsisa32r2el-*-elf*)
- tm_file="${tm_file} mips/elf.h"
- tmake_file=mips/t-isa3264
- tm_defines="MIPS_ISA_DEFAULT=33 MIPS_ABI_DEFAULT=ABI_EABI"
- ;;
+ tm_file="${tm_file} mips/elf.h"
+ tmake_file=mips/t-isa3264
+ tm_defines="MIPS_ISA_DEFAULT=33 MIPS_ABI_DEFAULT=ABI_EABI"
+ ;;
mipsisa64-*-elf* | mipsisa64el-*-elf*)
- tm_file="${tm_file} mips/elf.h"
- tmake_file=mips/t-isa3264
- target_cpu_default="MASK_64BIT|MASK_FLOAT64|MASK_GAS"
- tm_defines="MIPS_ISA_DEFAULT=64 MIPS_ABI_DEFAULT=ABI_MEABI"
- ;;
+ tm_file="${tm_file} mips/elf.h"
+ tmake_file=mips/t-isa3264
+ target_cpu_default="MASK_64BIT|MASK_FLOAT64|MASK_GAS"
+ tm_defines="MIPS_ISA_DEFAULT=64 MIPS_ABI_DEFAULT=ABI_MEABI"
+ ;;
mipsisa64sr71k-*-elf*)
tm_file="${tm_file} mips/elf.h"
tmake_file=mips/t-sr71k
- target_cpu_default="MASK_64BIT|MASK_FLOAT64|MASK_GAS"
- tm_defines="MIPS_ISA_DEFAULT=64 MIPS_CPU_STRING_DEFAULT=\\\"sr71000\\\" MIPS_ABI_DEFAULT=ABI_MEABI"
+ target_cpu_default="MASK_64BIT|MASK_FLOAT64|MASK_GAS"
+ tm_defines="MIPS_ISA_DEFAULT=64 MIPS_CPU_STRING_DEFAULT=\\\"sr71000\\\" MIPS_ABI_DEFAULT=ABI_MEABI"
;;
mipsisa64sb1-*-elf* | mipsisa64sb1el-*-elf*)
- tm_file="${tm_file} mips/elf.h"
- tmake_file=mips/t-elf
- target_cpu_default="MASK_64BIT|MASK_FLOAT64|MASK_GAS"
- tm_defines="MIPS_ISA_DEFAULT=64 MIPS_CPU_STRING_DEFAULT=\\\"sb1\\\" MIPS_ABI_DEFAULT=ABI_O64"
- ;;
+ tm_file="${tm_file} mips/elf.h"
+ tmake_file=mips/t-elf
+ target_cpu_default="MASK_64BIT|MASK_FLOAT64|MASK_GAS"
+ tm_defines="MIPS_ISA_DEFAULT=64 MIPS_CPU_STRING_DEFAULT=\\\"sb1\\\" MIPS_ABI_DEFAULT=ABI_O64"
+ ;;
mips-*-elf* | mipsel-*-elf*)
- tm_file="${tm_file} mips/elf.h"
- tmake_file=mips/t-elf
- ;;
+ tm_file="${tm_file} mips/elf.h"
+ tmake_file=mips/t-elf
+ ;;
mips64-*-elf* | mips64el-*-elf*)
- tm_file="${tm_file} mips/elf64.h"
- tmake_file=mips/t-elf
- target_cpu_default="MASK_64BIT|MASK_FLOAT64|MASK_GAS"
- tm_defines="MIPS_ISA_DEFAULT=3 MIPS_ABI_DEFAULT=ABI_O64"
- ;;
+ tm_file="${tm_file} mips/elf64.h"
+ tmake_file=mips/t-elf
+ target_cpu_default="MASK_64BIT|MASK_FLOAT64|MASK_GAS"
+ tm_defines="MIPS_ISA_DEFAULT=3 MIPS_ABI_DEFAULT=ABI_O64"
+ ;;
mips64vr-*-elf* | mips64vrel-*-elf*)
tm_file="mips/vr.h ${tm_file} mips/elf64.h"
tm_defines="MIPS_ABI_DEFAULT=ABI_O64 MIPS_MARCH_CONTROLS_SOFT_FLOAT=1"
tmake_file=mips/t-vr
;;
mips64orion-*-elf* | mips64orionel-*-elf*)
- tm_file="${tm_file} mips/elforion.h mips/elf64.h"
- tmake_file=mips/t-elf
- tmake_file=mips/t-elf
- target_cpu_default="MASK_64BIT|MASK_FLOAT64|MASK_GAS"
- tm_defines="MIPS_ISA_DEFAULT=3 MIPS_ABI_DEFAULT=ABI_O64"
- ;;
+ tm_file="${tm_file} mips/elforion.h mips/elf64.h"
+ tmake_file=mips/t-elf
+ tmake_file=mips/t-elf
+ target_cpu_default="MASK_64BIT|MASK_FLOAT64|MASK_GAS"
+ tm_defines="MIPS_ISA_DEFAULT=3 MIPS_ABI_DEFAULT=ABI_O64"
+ ;;
mips64orion-*-rtems*)
- xm_defines=POSIX
- tm_file="${tm_file} mips/elforion.h mips/elf64.h mips/rtems64.h rtems.h"
- tmake_file="mips/t-elf t-rtems"
- tmake_file=mips/t-elf
- target_cpu_default="MASK_64BIT|MASK_FLOAT64|MASK_GAS"
- tm_defines="MIPS_ISA_DEFAULT=3 MIPS_ABI_DEFAULT=ABI_O64"
- if test x$enable_threads = xyes; then
- thread_file='rtems'
- fi
- ;;
+ xm_defines=POSIX
+ tm_file="${tm_file} mips/elforion.h mips/elf64.h mips/rtems64.h rtems.h"
+ tmake_file="mips/t-elf t-rtems"
+ tmake_file=mips/t-elf
+ target_cpu_default="MASK_64BIT|MASK_FLOAT64|MASK_GAS"
+ tm_defines="MIPS_ISA_DEFAULT=3 MIPS_ABI_DEFAULT=ABI_O64"
+ if test x$enable_threads = xyes; then
+ thread_file='rtems'
+ fi
+ ;;
mips*-*-rtems*)
- xm_defines=POSIX
- tm_file="${tm_file} mips/elf.h mips/rtems.h rtems.h"
- tmake_file="mips/t-elf t-rtems"
- if test x$enable_threads = xyes; then
- thread_file='rtems'
- fi
- ;;
+ xm_defines=POSIX
+ tm_file="${tm_file} mips/elf.h mips/rtems.h rtems.h"
+ tmake_file="mips/t-elf t-rtems"
+ if test x$enable_threads = xyes; then
+ thread_file='rtems'
+ fi
+ ;;
mipstx39-*-elf* | mipstx39el-*-elf*)
- tm_file="${tm_file} mips/r3900.h mips/elf.h"
- tmake_file=mips/t-r3900
- ;;
+ tm_file="${tm_file} mips/r3900.h mips/elf.h"
+ tmake_file=mips/t-r3900
+ ;;
mmix-knuth-mmixware)
- need_64bit_hwint=yes
- ;;
+ need_64bit_hwint=yes
+ ;;
mn10200-*-*)
- tm_file="dbxelf.h elfos.h svr4.h ${tm_file}"
- if test x$stabs = xyes
- then
- tm_file="${tm_file} dbx.h"
- fi
- use_collect2=no
- ;;
+ tm_file="dbxelf.h elfos.h svr4.h ${tm_file}"
+ if test x$stabs = xyes
+ then
+ tm_file="${tm_file} dbx.h"
+ fi
+ use_collect2=no
+ ;;
mn10300-*-*)
- tm_file="dbxelf.h elfos.h svr4.h ${tm_file}"
- if test x$stabs = xyes
- then
- tm_file="${tm_file} dbx.h"
- fi
- use_collect2=no
- ;;
+ tm_file="dbxelf.h elfos.h svr4.h ${tm_file}"
+ if test x$stabs = xyes
+ then
+ tm_file="${tm_file} dbx.h"
+ fi
+ use_collect2=no
+ ;;
ns32k-*-netbsdelf*)
- echo "GCC does not yet support the ${machine} target"; exit 1
- ;;
+ echo "GCC does not yet support the ${machine} target"; exit 1
+ ;;
ns32k-*-netbsd*)
- tm_file="${tm_file} netbsd.h netbsd-aout.h ns32k/netbsd.h"
- # On NetBSD, the headers are already okay, except for math.h.
- tmake_file="t-netbsd ns32k/t-ns32k"
- extra_parts=""
- use_collect2=yes
- ;;
+ tm_file="${tm_file} netbsd.h netbsd-aout.h ns32k/netbsd.h"
+ # On NetBSD, the headers are already okay, except for math.h.
+ tmake_file="t-netbsd ns32k/t-ns32k"
+ extra_parts=""
+ use_collect2=yes
+ ;;
pdp11-*-bsd)
- tm_file="${tm_file} pdp11/2bsd.h"
+ tm_file="${tm_file} pdp11/2bsd.h"
;;
pdp11-*-*)
- ;;
+ ;;
avr-*-*)
- ;;
+ ;;
ns32k-*-openbsd*)
- # Nothing special
- ;;
+ # Nothing special
+ ;;
romp-*-openbsd*)
- # Nothing special
- ;;
+ # Nothing special
+ ;;
powerpc-*-openbsd*)
- tmake_file="${tmake_file} rs6000/t-fprules rs6000/t-openbsd"
- extra_headers=
- ;;
+ tmake_file="${tmake_file} rs6000/t-fprules rs6000/t-openbsd"
+ extra_headers=
+ ;;
powerpc64-*-linux*)
- tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/linux64.h"
- tmake_file="rs6000/t-fprules t-slibgcc-elf-ver t-linux rs6000/t-linux64"
- ;;
+ tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/linux64.h"
+ tmake_file="rs6000/t-fprules t-slibgcc-elf-ver t-linux rs6000/t-linux64"
+ ;;
powerpc64-*-gnu*)
- tm_file="${cpu_type}/${cpu_type}.h elfos.h svr4.h freebsd-spec.h gnu.h rs6000/sysv4.h rs6000/linux64.h rs6000/gnu.h"
- tmake_file="rs6000/t-fprules t-slibgcc-elf-ver t-gnu rs6000/t-linux64"
- ;;
+ tm_file="${cpu_type}/${cpu_type}.h elfos.h svr4.h freebsd-spec.h gnu.h rs6000/sysv4.h rs6000/linux64.h rs6000/gnu.h"
+ tmake_file="rs6000/t-fprules t-slibgcc-elf-ver t-gnu rs6000/t-linux64"
+ ;;
powerpc-*-beos*)
- tm_file="${tm_file} rs6000/aix.h rs6000/beos.h rs6000/xcoff.h"
- xm_defines=POSIX
- tmake_file="rs6000/t-fprules rs6000/t-beos"
- extra_headers=
- ;;
+ tm_file="${tm_file} rs6000/aix.h rs6000/beos.h rs6000/xcoff.h"
+ xm_defines=POSIX
+ tmake_file="rs6000/t-fprules rs6000/t-beos"
+ extra_headers=
+ ;;
powerpc-*-darwin*)
- tm_file="${tm_file} rs6000/darwin.h"
- tmake_file="rs6000/t-fprules t-darwin rs6000/t-darwin"
- extra_headers=altivec.h
- # override ppc default
- need_64bit_hwint=
- # powerpc-darwin host support.
- host_hook_obj=host-darwin.o
- xmake_file=rs6000/x-darwin
- ;;
+ tm_file="${tm_file} rs6000/darwin.h"
+ tmake_file="rs6000/t-fprules t-darwin rs6000/t-darwin"
+ extra_headers=altivec.h
+ # override ppc default
+ need_64bit_hwint=
+ # powerpc-darwin host support.
+ host_hook_obj=host-darwin.o
+ xmake_file=rs6000/x-darwin
+ ;;
powerpc*-*-freebsd*)
- tm_file="${tm_file} dbxelf.h elfos.h ${fbsd_tm_file} rs6000/sysv4.h rs6000/freebsd.h"
- tmake_file="rs6000/t-fprules rs6000/t-ppcos ${tmake_file} rs6000/t-ppccomm"
- ;;
+ tm_file="${tm_file} dbxelf.h elfos.h ${fbsd_tm_file} rs6000/sysv4.h rs6000/freebsd.h"
+ tmake_file="rs6000/t-fprules rs6000/t-ppcos ${tmake_file} rs6000/t-ppccomm"
+ ;;
powerpc-*-sysv*)
- tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h"
- xm_defines=POSIX
- tmake_file="rs6000/t-fprules rs6000/t-ppcos rs6000/t-ppccomm"
- ;;
+ tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h"
+ xm_defines=POSIX
+ tmake_file="rs6000/t-fprules rs6000/t-ppcos rs6000/t-ppccomm"
+ ;;
powerpc-*-netbsd*)
- tm_file="${tm_file} dbxelf.h elfos.h netbsd.h netbsd-elf.h freebsd-spec.h rs6000/sysv4.h rs6000/netbsd.h"
- tmake_file="${tmake_file} rs6000/t-netbsd"
- ;;
+ tm_file="${tm_file} dbxelf.h elfos.h netbsd.h netbsd-elf.h freebsd-spec.h rs6000/sysv4.h rs6000/netbsd.h"
+ tmake_file="${tmake_file} rs6000/t-netbsd"
+ ;;
powerpc-*-chorusos*)
- xm_defines=POSIX
- tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h chorus.h"
- tmake_file="rs6000/t-fprules rs6000/t-ppcos rs6000/t-ppccomm"
- case x${enable_threads} in
- xyes | xpthreads | xposix)
- thread_file='posix'
- ;;
- esac
- ;;
+ xm_defines=POSIX
+ tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h chorus.h"
+ tmake_file="rs6000/t-fprules rs6000/t-ppcos rs6000/t-ppccomm"
+ case x${enable_threads} in
+ xyes | xpthreads | xposix)
+ thread_file='posix'
+ ;;
+ esac
+ ;;
powerpc-*-eabiaix*)
- xm_defines=POSIX
- tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h rs6000/eabiaix.h"
- tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
- ;;
+ xm_defines=POSIX
+ tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h rs6000/eabiaix.h"
+ tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
+ ;;
powerpc-*-eabispe*)
- xm_defines=POSIX
- tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h rs6000/eabispe.h"
- tmake_file="rs6000/t-fprules rs6000/t-ppcendian rs6000/t-ppccomm"
- ;;
+ xm_defines=POSIX
+ tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h rs6000/eabispe.h"
+ tmake_file="rs6000/t-fprules rs6000/t-ppcendian rs6000/t-ppccomm"
+ ;;
powerpc-*-eabisimaltivec*)
- xm_defines=POSIX
- tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h rs6000/eabisim.h rs6000/eabialtivec.h"
- tmake_file="rs6000/t-fprules rs6000/t-ppcendian rs6000/t-ppccomm"
- ;;
+ xm_defines=POSIX
+ tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h rs6000/eabisim.h rs6000/eabialtivec.h"
+ tmake_file="rs6000/t-fprules rs6000/t-ppcendian rs6000/t-ppccomm"
+ ;;
powerpc-*-eabisim*)
- xm_defines=POSIX
- tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h rs6000/eabisim.h"
- tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
- ;;
+ xm_defines=POSIX
+ tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h rs6000/eabisim.h"
+ tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
+ ;;
powerpc-*-elf*)
- xm_defines=POSIX
- tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h"
- tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
- ;;
+ xm_defines=POSIX
+ tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h"
+ tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
+ ;;
powerpc-*-eabialtivec*)
- xm_defines=POSIX
- tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h rs6000/eabialtivec.h"
- tmake_file="rs6000/t-fprules rs6000/t-ppcendian rs6000/t-ppccomm"
- ;;
+ xm_defines=POSIX
+ tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h rs6000/eabialtivec.h"
+ tmake_file="rs6000/t-fprules rs6000/t-ppcendian rs6000/t-ppccomm"
+ ;;
powerpc-*-eabi*)
- xm_defines=POSIX
- tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h"
- tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
- ;;
+ xm_defines=POSIX
+ tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h"
+ tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
+ ;;
powerpc-*-rtems*)
- xm_defines=POSIX
- tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h rs6000/rtems.h rtems.h"
- tmake_file="rs6000/t-fprules rs6000/t-rtems t-rtems rs6000/t-ppccomm"
- if test x$enable_threads = xyes; then
- thread_file='rtems'
- fi
- ;;
+ xm_defines=POSIX
+ tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h rs6000/rtems.h rtems.h"
+ tmake_file="rs6000/t-fprules rs6000/t-rtems t-rtems rs6000/t-ppccomm"
+ if test x$enable_threads = xyes; then
+ thread_file='rtems'
+ fi
+ ;;
powerpc-*-linux*libc1)
- tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/linux.h"
- tmake_file="rs6000/t-fprules rs6000/t-ppcos t-slibgcc-elf-ver t-linux t-linux-gnulibc1 rs6000/t-ppccomm"
- if test x$enable_threads = xyes; then
- thread_file='posix'
- fi
- ;;
+ tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/linux.h"
+ tmake_file="rs6000/t-fprules rs6000/t-ppcos t-slibgcc-elf-ver t-linux t-linux-gnulibc1 rs6000/t-ppccomm"
+ if test x$enable_threads = xyes; then
+ thread_file='posix'
+ fi
+ ;;
powerpc-*-linux-gnualtivec*)
- tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/linux.h rs6000/linuxaltivec.h"
- tmake_file="rs6000/t-fprules rs6000/t-ppcos t-slibgcc-elf-ver t-linux rs6000/t-ppccomm"
- ;;
+ tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/linux.h rs6000/linuxaltivec.h"
+ tmake_file="rs6000/t-fprules rs6000/t-ppcos t-slibgcc-elf-ver t-linux rs6000/t-ppccomm"
+ ;;
powerpc-*-linux*)
- tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/linux.h"
- tmake_file="rs6000/t-fprules rs6000/t-ppcos t-slibgcc-elf-ver t-linux rs6000/t-ppccomm"
- ;;
+ tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/linux.h"
+ tmake_file="rs6000/t-fprules rs6000/t-ppcos t-slibgcc-elf-ver t-linux rs6000/t-ppccomm"
+ ;;
powerpc-*-gnu-gnualtivec*)
- tm_file="${cpu_type}/${cpu_type}.h elfos.h svr4.h freebsd-spec.h gnu.h rs6000/sysv4.h rs6000/linux.h rs6000/linuxaltivec.h rs6000/gnu.h"
- tmake_file="rs6000/t-fprules rs6000/t-ppcos t-slibgcc-elf-ver t-gnu rs6000/t-ppccomm"
- if test x$enable_threads = xyes; then
- thread_file='posix'
- fi
- ;;
+ tm_file="${cpu_type}/${cpu_type}.h elfos.h svr4.h freebsd-spec.h gnu.h rs6000/sysv4.h rs6000/linux.h rs6000/linuxaltivec.h rs6000/gnu.h"
+ tmake_file="rs6000/t-fprules rs6000/t-ppcos t-slibgcc-elf-ver t-gnu rs6000/t-ppccomm"
+ if test x$enable_threads = xyes; then
+ thread_file='posix'
+ fi
+ ;;
powerpc-*-gnu*)
- tm_file="${cpu_type}/${cpu_type}.h elfos.h svr4.h freebsd-spec.h gnu.h rs6000/sysv4.h rs6000/linux.h rs6000/gnu.h"
- tmake_file="rs6000/t-fprules rs6000/t-ppcos t-slibgcc-elf-ver t-gnu rs6000/t-ppccomm"
- if test x$enable_threads = xyes; then
- thread_file='posix'
- fi
- ;;
+ tm_file="${cpu_type}/${cpu_type}.h elfos.h svr4.h freebsd-spec.h gnu.h rs6000/sysv4.h rs6000/linux.h rs6000/gnu.h"
+ tmake_file="rs6000/t-fprules rs6000/t-ppcos t-slibgcc-elf-ver t-gnu rs6000/t-ppccomm"
+ if test x$enable_threads = xyes; then
+ thread_file='posix'
+ fi
+ ;;
powerpc-wrs-vxworks*)
- # We want vxworks.h after rs6000/sysv4.h, which unfortunately
- # means we have to redo the tm_file list from scratch.
- tm_file="rs6000/rs6000.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h"
- tm_file="${tm_file} vxworks.h rs6000/vxworks.h"
- tmake_file="${tmake_file} rs6000/t-fprules rs6000/t-ppccomm rs6000/t-vxworks"
- extra_headers=ppc-asm.h
- ;;
+ # We want vxworks.h after rs6000/sysv4.h, which unfortunately
+ # means we have to redo the tm_file list from scratch.
+ tm_file="rs6000/rs6000.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h"
+ tm_file="${tm_file} vxworks.h rs6000/vxworks.h"
+ tmake_file="${tmake_file} rs6000/t-fprules rs6000/t-ppccomm rs6000/t-vxworks"
+ extra_headers=ppc-asm.h
+ ;;
powerpc-wrs-windiss*)
xm_defines=POSIX
- tm_file="${tm_file} elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/windiss.h"
+ tm_file="${tm_file} elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/windiss.h"
tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
thread_file=""
;;
powerpcle-*-sysv*)
- tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/sysv4le.h"
- xm_defines=POSIX
- tmake_file="rs6000/t-fprules rs6000/t-ppcos rs6000/t-ppccomm"
- ;;
+ tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/sysv4le.h"
+ xm_defines=POSIX
+ tmake_file="rs6000/t-fprules rs6000/t-ppcos rs6000/t-ppccomm"
+ ;;
powerpcle-*-elf*)
- xm_defines=POSIX
- tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/sysv4le.h"
- tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
- ;;
+ xm_defines=POSIX
+ tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/sysv4le.h"
+ tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
+ ;;
powerpcle-*-eabisim*)
- xm_defines=POSIX
- tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/sysv4le.h rs6000/eabi.h rs6000/eabisim.h"
- tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
- ;;
+ xm_defines=POSIX
+ tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/sysv4le.h rs6000/eabi.h rs6000/eabisim.h"
+ tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
+ ;;
powerpcle-*-eabi*)
- xm_defines=POSIX
- tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/sysv4le.h rs6000/eabi.h"
- tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
- ;;
+ xm_defines=POSIX
+ tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/sysv4le.h rs6000/eabi.h"
+ tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
+ ;;
rs6000-ibm-aix3.[01]*)
- xm_defines=POSIX
- tm_file="${tm_file} rs6000/aix.h rs6000/aix31.h rs6000/xcoff.h"
- use_collect2=yes
- ;;
+ xm_defines=POSIX
+ tm_file="${tm_file} rs6000/aix.h rs6000/aix31.h rs6000/xcoff.h"
+ use_collect2=yes
+ ;;
rs6000-ibm-aix3.2.[456789]* | powerpc-ibm-aix3.2.[456789]*)
- xm_defines=POSIX
- tm_file="${tm_file} rs6000/aix.h rs6000/aix3newas.h rs6000/xcoff.h"
- tmake_file="rs6000/t-fprules rs6000/t-newas"
- use_collect2=yes
- extra_headers=
- ;;
+ xm_defines=POSIX
+ tm_file="${tm_file} rs6000/aix.h rs6000/aix3newas.h rs6000/xcoff.h"
+ tmake_file="rs6000/t-fprules rs6000/t-newas"
+ use_collect2=yes
+ extra_headers=
+ ;;
rs6000-ibm-aix4.[12]* | powerpc-ibm-aix4.[12]*)
- xm_defines=POSIX
- tm_file="${tm_file} rs6000/aix.h rs6000/aix41.h rs6000/xcoff.h"
- tmake_file="rs6000/t-fprules rs6000/t-newas"
- use_collect2=yes
- extra_headers=
- ;;
+ xm_defines=POSIX
+ tm_file="${tm_file} rs6000/aix.h rs6000/aix41.h rs6000/xcoff.h"
+ tmake_file="rs6000/t-fprules rs6000/t-newas"
+ use_collect2=yes
+ extra_headers=
+ ;;
rs6000-ibm-aix4.[3456789]* | powerpc-ibm-aix4.[3456789]*)
- xm_defines=POSIX
- tm_file="${tm_file} rs6000/aix.h rs6000/aix43.h rs6000/xcoff.h"
- tmake_file=rs6000/t-aix43
- use_collect2=yes
- thread_file='aix'
- extra_headers=
- ;;
+ xm_defines=POSIX
+ tm_file="${tm_file} rs6000/aix.h rs6000/aix43.h rs6000/xcoff.h"
+ tmake_file=rs6000/t-aix43
+ use_collect2=yes
+ thread_file='aix'
+ extra_headers=
+ ;;
rs6000-ibm-aix5.1.* | powerpc-ibm-aix5.1.*)
- xm_defines=POSIX
- tm_file="${tm_file} rs6000/aix.h rs6000/aix51.h rs6000/xcoff.h"
- tmake_file=rs6000/t-aix43
- use_collect2=yes
- thread_file='aix'
- extra_headers=
- ;;
+ xm_defines=POSIX
+ tm_file="${tm_file} rs6000/aix.h rs6000/aix51.h rs6000/xcoff.h"
+ tmake_file=rs6000/t-aix43
+ use_collect2=yes
+ thread_file='aix'
+ extra_headers=
+ ;;
rs6000-ibm-aix[56789].* | powerpc-ibm-aix[56789].*)
- xm_defines=POSIX
- tm_file="${tm_file} rs6000/aix.h rs6000/aix52.h rs6000/xcoff.h"
- tmake_file=rs6000/t-aix52
- use_collect2=yes
- thread_file='aix'
- extra_headers=
- ;;
+ xm_defines=POSIX
+ tm_file="${tm_file} rs6000/aix.h rs6000/aix52.h rs6000/xcoff.h"
+ tmake_file=rs6000/t-aix52
+ use_collect2=yes
+ thread_file='aix'
+ extra_headers=
+ ;;
rs6000-ibm-aix*)
- xm_defines=POSIX
- tm_file="${tm_file} rs6000/aix.h rs6000/xcoff.h"
- use_collect2=yes
- ;;
+ xm_defines=POSIX
+ tm_file="${tm_file} rs6000/aix.h rs6000/xcoff.h"
+ use_collect2=yes
+ ;;
rs6000-bull-bosx)
- xm_defines=POSIX
- tm_file="${tm_file} rs6000/aix.h rs6000/xcoff.h"
- use_collect2=yes
- ;;
+ xm_defines=POSIX
+ tm_file="${tm_file} rs6000/aix.h rs6000/xcoff.h"
+ use_collect2=yes
+ ;;
rs6000-*-mach*)
- tm_file="${tm_file} rs6000/mach.h"
- xm_defines=POSIX
- use_collect2=yes
- ;;
+ tm_file="${tm_file} rs6000/mach.h"
+ xm_defines=POSIX
+ use_collect2=yes
+ ;;
rs6000-*-lynxos*)
- tm_file="lynx.h rs6000/lynx.h"
- tmake_file=rs6000/t-fprules
- use_collect2=yes
- ;;
+ tm_file="lynx.h rs6000/lynx.h"
+ tmake_file=rs6000/t-fprules
+ use_collect2=yes
+ ;;
s390-*-linux*)
- tm_file="s390/s390.h dbxelf.h elfos.h svr4.h linux.h s390/linux.h"
- tmake_file="t-slibgcc-elf-ver t-linux s390/t-crtstuff"
- ;;
+ tm_file="s390/s390.h dbxelf.h elfos.h svr4.h linux.h s390/linux.h"
+ tmake_file="t-slibgcc-elf-ver t-linux s390/t-crtstuff"
+ ;;
s390x-*-linux*)
- tm_file="s390/s390x.h s390/s390.h dbxelf.h elfos.h svr4.h linux.h s390/linux.h"
- tm_p_file=s390/s390-protos.h
- md_file=s390/s390.md
- extra_modes=s390/s390-modes.def
- out_file=s390/s390.c
- tmake_file="t-slibgcc-elf-ver t-linux s390/t-crtstuff s390/t-linux64"
- ;;
+ tm_file="s390/s390x.h s390/s390.h dbxelf.h elfos.h svr4.h linux.h s390/linux.h"
+ tm_p_file=s390/s390-protos.h
+ md_file=s390/s390.md
+ extra_modes=s390/s390-modes.def
+ out_file=s390/s390.c
+ tmake_file="t-slibgcc-elf-ver t-linux s390/t-crtstuff s390/t-linux64"
+ ;;
sh-*-elf* | sh[2346l]*-*-elf*)
- tmake_file="sh/t-sh sh/t-elf"
- case $machine in
- shl* | sh64l*)
- tm_file="sh/little.h ${tm_file}"
- tmake_file="${tmake_file} sh/t-le"
- ;;
- esac
- tm_file="${tm_file} dbxelf.h elfos.h svr4.h sh/embed-elf.h"
- case $machine in
- sh64*)
- tmake_file="${tmake_file} sh/t-sh64"
- tm_file="${tm_file} sh/sh64.h"
- extra_headers="shmedia.h ushmedia.h sshmedia.h"
- ;;
- sh4_single*) target_cpu_default="SELECT_SH4_SINGLE" ;;
- sh4*) target_cpu_default="SELECT_SH4" ;;
- sh3e*) target_cpu_default="SELECT_SH3E" ;;
- sh3*) target_cpu_default="SELECT_SH3" ;;
- sh2e*) target_cpu_default="SELECT_SH2E" ;;
- sh2*) target_cpu_default="SELECT_SH2" ;;
- esac
- case $machine in
- sh[234]*) tmake_file="${tmake_file} sh/t-monolib" ;;
- esac
- ;;
+ tmake_file="sh/t-sh sh/t-elf"
+ case $machine in
+ shl* | sh64l*)
+ tm_file="sh/little.h ${tm_file}"
+ tmake_file="${tmake_file} sh/t-le"
+ ;;
+ esac
+ tm_file="${tm_file} dbxelf.h elfos.h svr4.h sh/embed-elf.h"
+ case $machine in
+ sh64*)
+ tmake_file="${tmake_file} sh/t-sh64"
+ tm_file="${tm_file} sh/sh64.h"
+ extra_headers="shmedia.h ushmedia.h sshmedia.h"
+ ;;
+ sh4_single*) target_cpu_default="SELECT_SH4_SINGLE" ;;
+ sh4*) target_cpu_default="SELECT_SH4" ;;
+ sh3e*) target_cpu_default="SELECT_SH3E" ;;
+ sh3*) target_cpu_default="SELECT_SH3" ;;
+ sh2e*) target_cpu_default="SELECT_SH2E" ;;
+ sh2*) target_cpu_default="SELECT_SH2" ;;
+ esac
+ case $machine in
+ sh[234]*) tmake_file="${tmake_file} sh/t-monolib" ;;
+ esac
+ ;;
sh-*-rtemself*)
- xm_defines=POSIX
- tmake_file="sh/t-sh sh/t-elf t-rtems"
- tm_file="${tm_file} dbxelf.h elfos.h svr4.h sh/embed-elf.h sh/rtemself.h rtems.h"
- if test x$enable_threads = xyes; then
- thread_file='rtems'
- fi
- ;;
+ xm_defines=POSIX
+ tmake_file="sh/t-sh sh/t-elf t-rtems"
+ tm_file="${tm_file} dbxelf.h elfos.h svr4.h sh/embed-elf.h sh/rtemself.h rtems.h"
+ if test x$enable_threads = xyes; then
+ thread_file='rtems'
+ fi
+ ;;
sh-*-rtems*)
- xm_defines=POSIX
- tmake_file="sh/t-sh t-rtems"
- tm_file="${tm_file} sh/coff.h sh/rtems.h rtems.h"
- if test x$enable_threads = xyes; then
- thread_file='rtems'
- fi
- ;;
+ xm_defines=POSIX
+ tmake_file="sh/t-sh t-rtems"
+ tm_file="${tm_file} sh/coff.h sh/rtems.h rtems.h"
+ if test x$enable_threads = xyes; then
+ thread_file='rtems'
+ fi
+ ;;
sh-*-linux* | sh[2346lbe]*-*-linux*)
- tmake_file="sh/t-sh sh/t-elf t-slibgcc-elf-ver t-linux sh/t-linux"
- case $machine in
- sh*be-*-* | sh*eb-*-*) ;;
- *)
- tm_file="sh/little.h ${tm_file}"
- tmake_file="${tmake_file} sh/t-le"
- ;;
- esac
- tm_file="${tm_file} dbxelf.h elfos.h svr4.h sh/elf.h sh/linux.h"
- case $machine in
- sh64*)
- tmake_file="${tmake_file} sh/t-sh64"
- tm_file="${tm_file} sh/sh64.h"
- extra_headers="shmedia.h ushmedia.h sshmedia.h"
- ;;
- sh4_single*) target_cpu_default="SELECT_SH4_SINGLE" ;;
- sh4*) target_cpu_default="SELECT_SH4" ;;
- sh3e[lb]e*) target_cpu_default="SELECT_SH3E" ;;
- sh3e[lb]*) target_cpu_default="SELECT_SH3" ;;
- sh3e*) target_cpu_default="SELECT_SH3E" ;;
- sh3*) target_cpu_default="SELECT_SH3" ;;
- sh2e[lb]e*) target_cpu_default="SELECT_SH2E" ;;
- sh2e[lb]*) target_cpu_default="SELECT_SH2" ;;
- sh2e*) target_cpu_default="SELECT_SH2E" ;;
- sh2*) target_cpu_default="SELECT_SH2" ;;
- esac
- case $machine in
- sh[234]*) tmake_file="${tmake_file} sh/t-monolib" ;;
- esac
- ;;
+ tmake_file="sh/t-sh sh/t-elf t-slibgcc-elf-ver t-linux sh/t-linux"
+ case $machine in
+ sh*be-*-* | sh*eb-*-*) ;;
+ *)
+ tm_file="sh/little.h ${tm_file}"
+ tmake_file="${tmake_file} sh/t-le"
+ ;;
+ esac
+ tm_file="${tm_file} dbxelf.h elfos.h svr4.h sh/elf.h sh/linux.h"
+ case $machine in
+ sh64*)
+ tmake_file="${tmake_file} sh/t-sh64"
+ tm_file="${tm_file} sh/sh64.h"
+ extra_headers="shmedia.h ushmedia.h sshmedia.h"
+ ;;
+ sh4_single*) target_cpu_default="SELECT_SH4_SINGLE" ;;
+ sh4*) target_cpu_default="SELECT_SH4" ;;
+ sh3e[lb]e*) target_cpu_default="SELECT_SH3E" ;;
+ sh3e[lb]*) target_cpu_default="SELECT_SH3" ;;
+ sh3e*) target_cpu_default="SELECT_SH3E" ;;
+ sh3*) target_cpu_default="SELECT_SH3" ;;
+ sh2e[lb]e*) target_cpu_default="SELECT_SH2E" ;;
+ sh2e[lb]*) target_cpu_default="SELECT_SH2" ;;
+ sh2e*) target_cpu_default="SELECT_SH2E" ;;
+ sh2*) target_cpu_default="SELECT_SH2" ;;
+ esac
+ case $machine in
+ sh[234]*) tmake_file="${tmake_file} sh/t-monolib" ;;
+ esac
+ ;;
sh-*-netbsdelf* | shl*-*-netbsdelf* | sh5-*-netbsd* | sh5l*-*-netbsd* | \
sh64-*-netbsd* | sh64l*-*-netbsd*)
- tm_file="${tm_file} dbxelf.h elfos.h sh/elf.h netbsd.h netbsd-elf.h sh/netbsd-elf.h"
- tmake_file="${tmake_file} sh/t-sh sh/t-elf"
- case $machine in
- sh*l*-*)
- tm_file="sh/little.h ${tm_file}"
- tmake_file="${tmake_file} sh/t-le"
- ;;
- *)
- tmake_file="${tmake_file} sh/t-be"
- ;;
- esac
- case $machine in
- sh5*-*)
- # SHmedia, 32-bit ABI
- target_cpu_default="SH5_BIT|SH4_BIT|SH3_BIT|SH_E_BIT"
- tmake_file="${tmake_file} sh/t-sh64 sh/t-netbsd-sh5"
- ;;
- sh64*-*)
- # SHmedia, 64-bit ABI
- target_cpu_default="SH5_BIT|SH4_BIT"
- tmake_file="${tmake_file} sh/t-sh64 sh/t-netbsd-sh5 sh/t-netbsd-sh5-64"
- ;;
- *)
- # SH3, software floating point
- target_cpu_default="SH1_BIT|SH2_BIT|SH3_BIT"
- tmake_file="${tmake_file} sh/t-netbsd"
- ;;
- esac
- ;;
+ tm_file="${tm_file} dbxelf.h elfos.h sh/elf.h netbsd.h netbsd-elf.h sh/netbsd-elf.h"
+ tmake_file="${tmake_file} sh/t-sh sh/t-elf"
+ case $machine in
+ sh*l*-*)
+ tm_file="sh/little.h ${tm_file}"
+ tmake_file="${tmake_file} sh/t-le"
+ ;;
+ *)
+ tmake_file="${tmake_file} sh/t-be"
+ ;;
+ esac
+ case $machine in
+ sh5*-*)
+ # SHmedia, 32-bit ABI
+ target_cpu_default="SH5_BIT|SH4_BIT|SH3_BIT|SH_E_BIT"
+ tmake_file="${tmake_file} sh/t-sh64 sh/t-netbsd-sh5"
+ ;;
+ sh64*-*)
+ # SHmedia, 64-bit ABI
+ target_cpu_default="SH5_BIT|SH4_BIT"
+ tmake_file="${tmake_file} sh/t-sh64 sh/t-netbsd-sh5 sh/t-netbsd-sh5-64"
+ ;;
+ *)
+ # SH3, software floating point
+ target_cpu_default="SH1_BIT|SH2_BIT|SH3_BIT"
+ tmake_file="${tmake_file} sh/t-netbsd"
+ ;;
+ esac
+ ;;
sh-*-*)
- tm_file="${tm_file} sh/coff.h"
- ;;
+ tm_file="${tm_file} sh/coff.h"
+ ;;
sparc-tti-*)
- tm_file="${tm_file} sparc/pbd.h"
- xm_defines=POSIX
- ;;
+ tm_file="${tm_file} sparc/pbd.h"
+ xm_defines=POSIX
+ ;;
sparc-*-aout*)
- tmake_file=sparc/t-sparcbare
- tm_file="sparc/sparc.h aoutos.h sparc/aout.h libgloss.h"
- ;;
+ tmake_file=sparc/t-sparcbare
+ tm_file="sparc/sparc.h aoutos.h sparc/aout.h libgloss.h"
+ ;;
sparc-*-netbsdelf*)
- tm_file="${tm_file} elfos.h svr4.h sparc/sysv4.h netbsd.h netbsd-elf.h sparc/netbsd-elf.h"
- ;;
+ tm_file="${tm_file} elfos.h svr4.h sparc/sysv4.h netbsd.h netbsd-elf.h sparc/netbsd-elf.h"
+ ;;
sparc-*-netbsd*)
- tm_file="${tm_file} sparc/aout.h netbsd.h netbsd-aout.h sparc/netbsd.h"
- tmake_file=t-netbsd
- extra_parts=""
- use_collect2=yes
- ;;
+ tm_file="${tm_file} sparc/aout.h netbsd.h netbsd-aout.h sparc/netbsd.h"
+ tmake_file=t-netbsd
+ extra_parts=""
+ use_collect2=yes
+ ;;
sparc-*-openbsd*)
- tm_file="sparc/sparc.h ${tm_file}"
- # needed to unconfuse gdb
- tmake_file="t-libc-ok t-openbsd sparc/t-openbsd"
- # we need collect2 until our bug is fixed...
- use_collect2=yes
- ;;
+ tm_file="sparc/sparc.h ${tm_file}"
+ # needed to unconfuse gdb
+ tmake_file="t-libc-ok t-openbsd sparc/t-openbsd"
+ # we need collect2 until our bug is fixed...
+ use_collect2=yes
+ ;;
sparc64-*-openbsd*)
- tm_file="sparc/openbsd1-64.h sparc/sparc.h elfos.h svr4.h sparc/sysv4.h sparc/sol2.h sparc/sp64-elf.h openbsd.h sparc/openbsd64.h"
- gas=yes gnu_ld=yes
- with_cpu=ultrasparc
- ;;
+ tm_file="sparc/openbsd1-64.h sparc/sparc.h elfos.h svr4.h sparc/sysv4.h sparc/sol2.h sparc/sp64-elf.h openbsd.h sparc/openbsd64.h"
+ gas=yes gnu_ld=yes
+ with_cpu=ultrasparc
+ ;;
sparc-*-bsd*)
- tm_file="${tm_file} sparc/bsd.h"
- ;;
+ tm_file="${tm_file} sparc/bsd.h"
+ ;;
sparc-*-chorusos*)
- tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sol2.h sparc/sol2.h sparc/elf.h chorus.h"
- tmake_file="sparc/t-chorus-elf sparc/t-crtfm"
- extra_parts="crti.o crtn.o crtbegin.o crtend.o"
- case x${enable_threads} in
- xyes | xpthreads | xposix)
- thread_file='posix'
- ;;
- esac
- ;;
+ tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sol2.h sparc/sol2.h sparc/elf.h chorus.h"
+ tmake_file="sparc/t-chorus-elf sparc/t-crtfm"
+ extra_parts="crti.o crtn.o crtbegin.o crtend.o"
+ case x${enable_threads} in
+ xyes | xpthreads | xposix)
+ thread_file='posix'
+ ;;
+ esac
+ ;;
sparc-*-elf*)
- tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sol2.h sparc/sol2.h sparc/elf.h"
- tmake_file="sparc/t-elf sparc/t-crtfm"
- extra_parts="crti.o crtn.o crtbegin.o crtend.o"
- ;;
-sparc-*-linux*aout*) # SPARC's running GNU/Linux, a.out
- tm_file="aoutos.h sparc/sparc.h sparc/aout.h sparc/linux-aout.h"
- gnu_ld=yes
- ;;
-sparc-*-linux*libc1*) # SPARC's running GNU/Linux, libc5
- tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/linux.h"
- tmake_file="t-slibgcc-elf-ver t-linux t-linux-gnulibc1 sparc/t-crtfm"
- extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
- gnu_ld=yes
- ;;
-sparc-*-linux*) # SPARC's running GNU/Linux, libc6
- tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/linux.h"
- tmake_file="t-slibgcc-elf-ver t-linux sparc/t-crtfm"
- ;;
+ tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sol2.h sparc/sol2.h sparc/elf.h"
+ tmake_file="sparc/t-elf sparc/t-crtfm"
+ extra_parts="crti.o crtn.o crtbegin.o crtend.o"
+ ;;
+sparc-*-linux*aout*) # SPARC's running GNU/Linux, a.out
+ tm_file="aoutos.h sparc/sparc.h sparc/aout.h sparc/linux-aout.h"
+ gnu_ld=yes
+ ;;
+sparc-*-linux*libc1*) # SPARC's running GNU/Linux, libc5
+ tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/linux.h"
+ tmake_file="t-slibgcc-elf-ver t-linux t-linux-gnulibc1 sparc/t-crtfm"
+ extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
+ gnu_ld=yes
+ ;;
+sparc-*-linux*) # SPARC's running GNU/Linux, libc6
+ tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/linux.h"
+ tmake_file="t-slibgcc-elf-ver t-linux sparc/t-crtfm"
+ ;;
sparc-*-lynxos*)
- if test x$gas = xyes
- then
- tm_file="${tm_file} lynx.h sparc/aout.h sparc/lynx.h"
- else
- tm_file="${tm_file} lynx-ng.h sparc/aout.h sparc/lynx-ng.h"
- fi
- tmake_file=sparc/t-sunos41
- ;;
-sparc-*-rtemsaout*) # would otherwise be caught by sparc-*-rtems*
- echo "*** Configuration $machine not supported" 1>&2
- exit 1
- ;;
+ if test x$gas = xyes
+ then
+ tm_file="${tm_file} lynx.h sparc/aout.h sparc/lynx.h"
+ else
+ tm_file="${tm_file} lynx-ng.h sparc/aout.h sparc/lynx-ng.h"
+ fi
+ tmake_file=sparc/t-sunos41
+ ;;
+sparc-*-rtemsaout*) # would otherwise be caught by sparc-*-rtems*
+ echo "*** Configuration $machine not supported" 1>&2
+ exit 1
+ ;;
sparc-*-rtems*)
- xm_defines=POSIX
- tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sol2.h sparc/sol2.h sparc/elf.h sparc/rtemself.h rtems.h"
- tmake_file="sparc/t-elf sparc/t-crtfm t-rtems"
- extra_parts="crti.o crtn.o crtbegin.o crtend.o"
- if test x$enable_threads = xyes; then
- thread_file='rtems'
- fi
- ;;
+ xm_defines=POSIX
+ tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sol2.h sparc/sol2.h sparc/elf.h sparc/rtemself.h rtems.h"
+ tmake_file="sparc/t-elf sparc/t-crtfm t-rtems"
+ extra_parts="crti.o crtn.o crtbegin.o crtend.o"
+ if test x$enable_threads = xyes; then
+ thread_file='rtems'
+ fi
+ ;;
sparc64-*-solaris2* | sparcv9-*-solaris2*)
- tm_file="sparc/biarch64.h ${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sol2.h sparc/sol2.h sparc/sol2-64.h sparc/sol2-bi.h"
- if test x$gnu_ld = xyes; then
- tm_file="${tm_file} sparc/sol2-gld.h sparc/sol2-gld-bi.h"
- fi
- if test x$gas = xyes; then
- tm_file="${tm_file} sparc/sol2-gas-bi.h"
- fi
- xm_defines=POSIX
- tmake_file="sparc/t-sol2 sparc/t-sol2-64 sparc/t-crtfm"
- if test x$gnu_ld = xyes; then
- tmake_file="$tmake_file t-slibgcc-elf-ver"
- else
- tmake_file="$tmake_file t-slibgcc-sld"
- fi
- extra_parts="crt1.o crti.o crtn.o gcrt1.o crtbegin.o crtend.o"
- if test x${enable_threads} = x ; then
- enable_threads=$have_pthread_h
- if test x${enable_threads} = x ; then
- enable_threads=$have_thread_h
- fi
- fi
- if test x${enable_threads} = xyes ; then
- if test x${have_pthread_h} = xyes ; then
- thread_file='posix'
- else
- thread_file='solaris'
- fi
- fi
- need_64bit_hwint=yes
- ;;
+ tm_file="sparc/biarch64.h ${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sol2.h sparc/sol2.h sparc/sol2-64.h sparc/sol2-bi.h"
+ if test x$gnu_ld = xyes; then
+ tm_file="${tm_file} sparc/sol2-gld.h sparc/sol2-gld-bi.h"
+ fi
+ if test x$gas = xyes; then
+ tm_file="${tm_file} sparc/sol2-gas-bi.h"
+ fi
+ xm_defines=POSIX
+ tmake_file="sparc/t-sol2 sparc/t-sol2-64 sparc/t-crtfm"
+ if test x$gnu_ld = xyes; then
+ tmake_file="$tmake_file t-slibgcc-elf-ver"
+ else
+ tmake_file="$tmake_file t-slibgcc-sld"
+ fi
+ extra_parts="crt1.o crti.o crtn.o gcrt1.o crtbegin.o crtend.o"
+ if test x${enable_threads} = x ; then
+ enable_threads=$have_pthread_h
+ if test x${enable_threads} = x ; then
+ enable_threads=$have_thread_h
+ fi
+ fi
+ if test x${enable_threads} = xyes ; then
+ if test x${have_pthread_h} = xyes ; then
+ thread_file='posix'
+ else
+ thread_file='solaris'
+ fi
+ fi
+ need_64bit_hwint=yes
+ ;;
sparc-hal-solaris2*)
xm_defines=POSIX
tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sol2.h sparc/sol2.h sparc/hal.h"
tmake_file="sparc/t-halos sparc/t-sol2 sparc/t-crtfm"
- if test x$gnu_ld = xyes; then
- tm_file="${tm_file} sparc/sol2-gld.h"
- tmake_file="$tmake_file t-slibgcc-elf-ver"
- else
- tmake_file="$tmake_file t-slibgcc-sld"
- fi
+ if test x$gnu_ld = xyes; then
+ tm_file="${tm_file} sparc/sol2-gld.h"
+ tmake_file="$tmake_file t-slibgcc-elf-ver"
+ else
+ tmake_file="$tmake_file t-slibgcc-sld"
+ fi
extra_parts="crt1.o crti.o crtn.o gmon.o crtbegin.o crtend.o"
- thread_file='solaris'
+ thread_file='solaris'
;;
sparc-*-solaris2*)
- tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sol2.h sparc/sol2.h"
- if test x$gnu_ld = xyes; then
- tm_file="${tm_file} sparc/sol2-gld.h"
- fi
- tmake_file="sparc/t-sol2 sparc/t-crtfm"
- if test x$gnu_ld = xyes; then
- tmake_file="$tmake_file t-slibgcc-elf-ver"
- else
- tmake_file="$tmake_file t-slibgcc-sld"
- fi
- case $machine in
- *-*-solaris2.[0-6] | *-*-solaris2.[0-6].*)
- if test x$gnu_ld = xno; then
- tm_file="${tm_file} sparc/sol26-sld.h"
- fi
- ;;
- *-*-solaris2.[789])
- tm_file="sparc/biarch64.h ${tm_file} sparc/sol2-bi.h"
- if test x$gnu_ld = xyes; then
- tm_file="${tm_file} sparc/sol2-gld-bi.h"
- fi
- if test x$gas = xyes; then
- tm_file="${tm_file} sparc/sol2-gas-bi.h"
- fi
- tmake_file="$tmake_file sparc/t-sol2-64"
- need_64bit_hwint=yes
- ;;
- esac
- xm_defines=POSIX
- extra_parts="crt1.o crti.o crtn.o gcrt1.o gmon.o crtbegin.o crtend.o"
- if test x${enable_threads} = x; then
- enable_threads=$have_pthread_h
- if test x${enable_threads} = x; then
- enable_threads=$have_thread_h
- fi
- fi
- if test x${enable_threads} = xyes; then
- if test x${have_pthread_h} = xyes; then
- thread_file='posix'
- else
- thread_file='solaris'
- fi
- fi
- ;;
+ tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sol2.h sparc/sol2.h"
+ if test x$gnu_ld = xyes; then
+ tm_file="${tm_file} sparc/sol2-gld.h"
+ fi
+ tmake_file="sparc/t-sol2 sparc/t-crtfm"
+ if test x$gnu_ld = xyes; then
+ tmake_file="$tmake_file t-slibgcc-elf-ver"
+ else
+ tmake_file="$tmake_file t-slibgcc-sld"
+ fi
+ case $machine in
+ *-*-solaris2.[0-6] | *-*-solaris2.[0-6].*)
+ if test x$gnu_ld = xno; then
+ tm_file="${tm_file} sparc/sol26-sld.h"
+ fi
+ ;;
+ *-*-solaris2.[789])
+ tm_file="sparc/biarch64.h ${tm_file} sparc/sol2-bi.h"
+ if test x$gnu_ld = xyes; then
+ tm_file="${tm_file} sparc/sol2-gld-bi.h"
+ fi
+ if test x$gas = xyes; then
+ tm_file="${tm_file} sparc/sol2-gas-bi.h"
+ fi
+ tmake_file="$tmake_file sparc/t-sol2-64"
+ need_64bit_hwint=yes
+ ;;
+ esac
+ xm_defines=POSIX
+ extra_parts="crt1.o crti.o crtn.o gcrt1.o gmon.o crtbegin.o crtend.o"
+ if test x${enable_threads} = x; then
+ enable_threads=$have_pthread_h
+ if test x${enable_threads} = x; then
+ enable_threads=$have_thread_h
+ fi
+ fi
+ if test x${enable_threads} = xyes; then
+ if test x${have_pthread_h} = xyes; then
+ thread_file='posix'
+ else
+ thread_file='solaris'
+ fi
+ fi
+ ;;
sparc-*-sunos4.0*)
- tm_file="${tm_file} sparc/aout.h sparc/sunos4.h"
- use_collect2=yes
- ;;
+ tm_file="${tm_file} sparc/aout.h sparc/sunos4.h"
+ use_collect2=yes
+ ;;
sparc-*-sunos4*)
- tm_file="${tm_file} sparc/aout.h sparc/sunos4.h"
- tmake_file=sparc/t-sunos41
- use_collect2=yes
- if test x$gas = xyes; then
- tm_file="${tm_file} sparc/sun4gas.h"
- fi
- ;;
+ tm_file="${tm_file} sparc/aout.h sparc/sunos4.h"
+ tmake_file=sparc/t-sunos41
+ use_collect2=yes
+ if test x$gas = xyes; then
+ tm_file="${tm_file} sparc/sun4gas.h"
+ fi
+ ;;
sparc-*-sunos3*)
- tm_file="${tm_file} sparc/aout.h sparc/sun4o3.h"
- use_collect2=yes
- ;;
+ tm_file="${tm_file} sparc/aout.h sparc/sun4o3.h"
+ use_collect2=yes
+ ;;
sparc-*-sysv4*)
- tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h"
- xm_defines=POSIX
- tmake_file=t-svr4
- extra_parts="crtbegin.o crtend.o"
- ;;
+ tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h"
+ xm_defines=POSIX
+ tmake_file=t-svr4
+ extra_parts="crtbegin.o crtend.o"
+ ;;
sparclet-*-aout*)
- tm_file="${tm_file} aoutos.h sparc/aout.h sparc/splet.h libgloss.h"
- tmake_file=sparc/t-splet
- ;;
+ tm_file="${tm_file} aoutos.h sparc/aout.h sparc/splet.h libgloss.h"
+ tmake_file=sparc/t-splet
+ ;;
sparclite-*-coff*)
- tm_file="${tm_file} gofast.h sparc/lite.h svr3.h sparc/litecoff.h dbxcoff.h libgloss.h"
- tmake_file=sparc/t-sparclite
- ;;
+ tm_file="${tm_file} gofast.h sparc/lite.h svr3.h sparc/litecoff.h dbxcoff.h libgloss.h"
+ tmake_file=sparc/t-sparclite
+ ;;
sparclite-*-aout*)
- tm_file="${tm_file} gofast.h sparc/aout.h sparc/lite.h aoutos.h libgloss.h"
- tmake_file=sparc/t-sparclite
- ;;
+ tm_file="${tm_file} gofast.h sparc/aout.h sparc/lite.h aoutos.h libgloss.h"
+ tmake_file=sparc/t-sparclite
+ ;;
sparclite-*-elf*)
- tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sol2.h sparc/sol2.h sparc/elf.h gofast.h sparc/liteelf.h"
- tmake_file="sparc/t-sparclite sparc/t-crtfm"
+ tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sol2.h sparc/sol2.h sparc/elf.h gofast.h sparc/liteelf.h"
+ tmake_file="sparc/t-sparclite sparc/t-crtfm"
extra_parts="crtbegin.o crtend.o"
- ;;
+ ;;
sparc86x-*-aout*)
- tm_file="${tm_file} gofast.h sparc/aout.h sparc/sp86x-aout.h aoutos.h libgloss.h"
- tmake_file=sparc/t-sp86x
- ;;
+ tm_file="${tm_file} gofast.h sparc/aout.h sparc/sp86x-aout.h aoutos.h libgloss.h"
+ tmake_file=sparc/t-sp86x
+ ;;
sparc86x-*-elf*)
- tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sol2.h sparc/sol2.h sparc/elf.h gofast.h sparc/sp86x-elf.h"
- tmake_file="sparc/t-sp86x sparc/t-crtfm"
+ tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sol2.h sparc/sol2.h sparc/elf.h gofast.h sparc/sp86x-elf.h"
+ tmake_file="sparc/t-sp86x sparc/t-crtfm"
extra_parts="crtbegin.o crtend.o"
- ;;
+ ;;
sparc64-*-aout*)
- tm_file="sparc/sparc.h aoutos.h sparc/aout.h sparc/sp64-aout.h"
- ;;
+ tm_file="sparc/sparc.h aoutos.h sparc/aout.h sparc/sp64-aout.h"
+ ;;
sparc64-*-elf*)
- tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sol2.h sparc/sol2.h sparc/sp64-elf.h"
- tmake_file="${tmake_file} sparc/t-crtfm"
- extra_parts="crtbegin.o crtend.o"
- ;;
+ tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sol2.h sparc/sol2.h sparc/sp64-elf.h"
+ tmake_file="${tmake_file} sparc/t-crtfm"
+ extra_parts="crtbegin.o crtend.o"
+ ;;
sparc64-*-freebsd*|ultrasparc-*-freebsd*)
- tm_file="${tm_file} ${fbsd_tm_file} dbxelf.h elfos.h sparc/sysv4.h sparc/freebsd.h"
- tmake_file="${tmake_file} sparc/t-crtfm"
- xmake_file=none
- case "x$with_cpu" in
- xultrasparc) ;;
- x) with_cpu=ultrasparc ;;
- *) echo "$with_cpu not supported for freebsd target"; exit 1 ;;
- esac
- need_64bit_hwint=yes
- ;;
-sparc64-*-linux*) # 64-bit SPARC's running GNU/Linux
- tmake_file="t-slibgcc-elf-ver t-linux sparc/t-linux64 sparc/t-crtfm"
- tm_file="sparc/biarch64.h ${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/linux64.h"
- ;;
+ tm_file="${tm_file} ${fbsd_tm_file} dbxelf.h elfos.h sparc/sysv4.h sparc/freebsd.h"
+ tmake_file="${tmake_file} sparc/t-crtfm"
+ xmake_file=none
+ case "x$with_cpu" in
+ xultrasparc) ;;
+ x) with_cpu=ultrasparc ;;
+ *) echo "$with_cpu not supported for freebsd target"; exit 1 ;;
+ esac
+ need_64bit_hwint=yes
+ ;;
+sparc64-*-linux*) # 64-bit SPARC's running GNU/Linux
+ tmake_file="t-slibgcc-elf-ver t-linux sparc/t-linux64 sparc/t-crtfm"
+ tm_file="sparc/biarch64.h ${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/linux64.h"
+ ;;
sparc64-*-netbsd*)
- tmake_file="${tmake_file} sparc/t-netbsd64"
- tm_file="sparc/biarch64.h ${tm_file}"
- tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h netbsd.h netbsd-elf.h sparc/netbsd-elf.h"
- ;;
+ tmake_file="${tmake_file} sparc/t-netbsd64"
+ tm_file="sparc/biarch64.h ${tm_file}"
+ tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h netbsd.h netbsd-elf.h sparc/netbsd-elf.h"
+ ;;
strongarm-*-elf*)
- tm_file="arm/strongarm-elf.h dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h"
- tmake_file=arm/t-strongarm-elf
- out_file=arm/arm.c
- md_file=arm/arm.md
- extra_modes=arm/arm-modes.def
- ;;
+ tm_file="arm/strongarm-elf.h dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h"
+ tmake_file=arm/t-strongarm-elf
+ out_file=arm/arm.c
+ md_file=arm/arm.md
+ extra_modes=arm/arm-modes.def
+ ;;
strongarm-*-coff*)
- tm_file="arm/semi.h arm/aout.h arm/coff.h arm/strongarm-coff.h arm/arm.h"
- tmake_file=arm/t-strongarm-coff
- out_file=arm/arm.c
- md_file=arm/arm.md
- extra_modes=arm/arm-modes.def
- ;;
+ tm_file="arm/semi.h arm/aout.h arm/coff.h arm/strongarm-coff.h arm/arm.h"
+ tmake_file=arm/t-strongarm-coff
+ out_file=arm/arm.c
+ md_file=arm/arm.md
+ extra_modes=arm/arm-modes.def
+ ;;
strongarm-*-pe)
- tm_file="arm/semi.h arm/aout.h arm/coff.h arm/strongarm-coff.h arm/arm.h arm/pe.h arm/strongarm-pe.h"
- tmake_file=arm/t-strongarm-pe
- out_file=arm/arm.c
- md_file=arm/arm.md
- extra_modes=arm/arm-modes.def
- extra_objs=pe.o
- ;;
+ tm_file="arm/semi.h arm/aout.h arm/coff.h arm/strongarm-coff.h arm/arm.h arm/pe.h arm/strongarm-pe.h"
+ tmake_file=arm/t-strongarm-pe
+ out_file=arm/arm.c
+ md_file=arm/arm.md
+ extra_modes=arm/arm-modes.def
+ extra_objs=pe.o
+ ;;
thumb*-*-*)
- { echo "config.gcc: error:
+ { echo "config.gcc: error:
*** The Thumb targets have been deprecated. The equivalent
*** ARM based toolchain can now generate Thumb instructions
*** when the -mthumb switch is given to the compiler." 1>&2; exit 1; }
- ;;
+ ;;
v850-*-rtems*)
- xm_defines=POSIX
- tm_file="dbxelf.h elfos.h svr4.h ${tm_file} v850/v850.h v850/rtems.h rtems.h"
- tmake_file="v850/t-v850 t-rtems"
- if test x$stabs = xyes
- then
- tm_file="${tm_file} dbx.h"
- fi
- use_collect2=no
- c_target_objs="v850-c.o"
- cxx_target_objs="v850-c.o"
- ;;
+ xm_defines=POSIX
+ tm_file="dbxelf.h elfos.h svr4.h ${tm_file} v850/v850.h v850/rtems.h rtems.h"
+ tmake_file="v850/t-v850 t-rtems"
+ if test x$stabs = xyes
+ then
+ tm_file="${tm_file} dbx.h"
+ fi
+ use_collect2=no
+ c_target_objs="v850-c.o"
+ cxx_target_objs="v850-c.o"
+ ;;
v850e-*-*)
- target_cpu_default="TARGET_CPU_v850e"
- tm_file="dbxelf.h elfos.h svr4.h v850/v850.h"
- tm_p_file=v850/v850-protos.h
- tmake_file=v850/t-v850
- md_file=v850/v850.md
- out_file=v850/v850.c
- if test x$stabs = xyes
- then
- tm_file="${tm_file} dbx.h"
- fi
- use_collect2=no
- c_target_objs="v850-c.o"
- cxx_target_objs="v850-c.o"
- ;;
+ target_cpu_default="TARGET_CPU_v850e"
+ tm_file="dbxelf.h elfos.h svr4.h v850/v850.h"
+ tm_p_file=v850/v850-protos.h
+ tmake_file=v850/t-v850
+ md_file=v850/v850.md
+ out_file=v850/v850.c
+ if test x$stabs = xyes
+ then
+ tm_file="${tm_file} dbx.h"
+ fi
+ use_collect2=no
+ c_target_objs="v850-c.o"
+ cxx_target_objs="v850-c.o"
+ ;;
v850-*-*)
- target_cpu_default="TARGET_CPU_generic"
- tm_file="dbxelf.h elfos.h svr4.h ${tm_file}"
- tmake_file=v850/t-v850
- if test x$stabs = xyes
- then
- tm_file="${tm_file} dbx.h"
- fi
- use_collect2=no
- c_target_objs="v850-c.o"
- cxx_target_objs="v850-c.o"
- ;;
-vax-*-bsd*) # VAXen running BSD
- tm_file="${tm_file} vax/bsd.h"
- use_collect2=yes
- ;;
-vax-*-sysv*) # VAXen running system V
- tm_file="${tm_file} vax/vaxv.h"
- xm_defines=POSIX
- ;;
+ target_cpu_default="TARGET_CPU_generic"
+ tm_file="dbxelf.h elfos.h svr4.h ${tm_file}"
+ tmake_file=v850/t-v850
+ if test x$stabs = xyes
+ then
+ tm_file="${tm_file} dbx.h"
+ fi
+ use_collect2=no
+ c_target_objs="v850-c.o"
+ cxx_target_objs="v850-c.o"
+ ;;
+vax-*-bsd*) # VAXen running BSD
+ tm_file="${tm_file} vax/bsd.h"
+ use_collect2=yes
+ ;;
+vax-*-sysv*) # VAXen running system V
+ tm_file="${tm_file} vax/vaxv.h"
+ xm_defines=POSIX
+ ;;
vax-*-netbsdelf*)
- tm_file="${tm_file} elfos.h netbsd.h netbsd-elf.h vax/elf.h vax/netbsd-elf.h"
- float_format=vax
- ;;
+ tm_file="${tm_file} elfos.h netbsd.h netbsd-elf.h vax/elf.h vax/netbsd-elf.h"
+ float_format=vax
+ ;;
vax-*-netbsd*)
- tm_file="${tm_file} netbsd.h netbsd-aout.h vax/netbsd.h"
- tmake_file=t-netbsd
- extra_parts=""
- use_collect2=yes
- ;;
+ tm_file="${tm_file} netbsd.h netbsd-aout.h vax/netbsd.h"
+ tmake_file=t-netbsd
+ extra_parts=""
+ use_collect2=yes
+ ;;
vax-*-openbsd*)
- tm_file="vax/vax.h vax/openbsd1.h openbsd.h ${tm_file}"
- use_collect2=yes
- ;;
-vax-*-ultrix*) # VAXen running ultrix
- tm_file="${tm_file} vax/ultrix.h"
- ;;
-vax-*-vms*) # VAXen running VMS
- echo "Configuration $machine no longer supported" 1>&2
- exit 1
- ;;
-vax-*-*) # VAX default entry
- ;;
+ tm_file="vax/vax.h vax/openbsd1.h openbsd.h ${tm_file}"
+ use_collect2=yes
+ ;;
+vax-*-ultrix*) # VAXen running ultrix
+ tm_file="${tm_file} vax/ultrix.h"
+ ;;
+vax-*-vms*) # VAXen running VMS
+ echo "Configuration $machine no longer supported" 1>&2
+ exit 1
+ ;;
+vax-*-*) # VAX default entry
+ ;;
xscale-*-elf)
- tm_file="arm/xscale-elf.h dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h"
- tmake_file=arm/t-xscale-elf
- out_file=arm/arm.c
- md_file=arm/arm.md
- extra_modes=arm/arm-modes.def
- ;;
+ tm_file="arm/xscale-elf.h dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h"
+ tmake_file=arm/t-xscale-elf
+ out_file=arm/arm.c
+ md_file=arm/arm.md
+ extra_modes=arm/arm-modes.def
+ ;;
xscale-*-coff)
- tm_file="arm/semi.h arm/aout.h arm/coff.h arm/xscale-coff.h arm/arm.h"
- tmake_file=arm/t-xscale-coff
- out_file=arm/arm.c
- md_file=arm/arm.md
- extra_modes=arm/arm-modes.def
- ;;
+ tm_file="arm/semi.h arm/aout.h arm/coff.h arm/xscale-coff.h arm/arm.h"
+ tmake_file=arm/t-xscale-coff
+ out_file=arm/arm.c
+ md_file=arm/arm.md
+ extra_modes=arm/arm-modes.def
+ ;;
xstormy16-*-elf)
- # For historical reasons, the target files omit the 'x'.
- tm_file="dbxelf.h elfos.h svr4.h stormy16/stormy16.h"
- tm_p_file=stormy16/stormy16-protos.h
- md_file=stormy16/stormy16.md
- out_file=stormy16/stormy16.c
- tmake_file="stormy16/t-stormy16"
- extra_parts="crtbegin.o crtend.o"
- ;;
+ # For historical reasons, the target files omit the 'x'.
+ tm_file="dbxelf.h elfos.h svr4.h stormy16/stormy16.h"
+ tm_p_file=stormy16/stormy16-protos.h
+ md_file=stormy16/stormy16.md
+ out_file=stormy16/stormy16.c
+ tmake_file="stormy16/t-stormy16"
+ extra_parts="crtbegin.o crtend.o"
+ ;;
xtensa-*-elf*)
- tm_file="${tm_file} dbxelf.h elfos.h svr4.h xtensa/elf.h"
- tmake_file="xtensa/t-xtensa xtensa/t-elf"
- ;;
+ tm_file="${tm_file} dbxelf.h elfos.h svr4.h xtensa/elf.h"
+ tmake_file="xtensa/t-xtensa xtensa/t-elf"
+ ;;
xtensa-*-linux*)
- tm_file="${tm_file} dbxelf.h elfos.h svr4.h linux.h xtensa/linux.h"
- tmake_file="t-slibgcc-elf-ver t-linux xtensa/t-xtensa xtensa/t-linux"
- ;;
+ tm_file="${tm_file} dbxelf.h elfos.h svr4.h linux.h xtensa/linux.h"
+ tmake_file="t-slibgcc-elf-ver t-linux xtensa/t-xtensa xtensa/t-linux"
+ ;;
*)
- echo "*** Configuration $machine not supported" 1>&2
- exit 1
- ;;
+ echo "*** Configuration $machine not supported" 1>&2
+ exit 1
+ ;;
esac
case $machine in
*-*-sysv*)
- install_headers_dir=install-headers-cpio
- ;;
+ install_headers_dir=install-headers-cpio
+ ;;
esac
# Distinguish i[34567]86
@@ -2709,283 +2709,283 @@
target_cpu_default2=
case $machine in
i486-*-*)
- target_cpu_default2=TARGET_CPU_DEFAULT_i486
- ;;
+ target_cpu_default2=TARGET_CPU_DEFAULT_i486
+ ;;
i586-*-*)
- case $target_alias in
- k6_2-*)
- target_cpu_default2=TARGET_CPU_DEFAULT_k6_2
- ;;
- k6_3-*)
- target_cpu_default2=TARGET_CPU_DEFAULT_k6_3
- ;;
- k6-*)
- target_cpu_default2=TARGET_CPU_DEFAULT_k6
- ;;
- pentium_mmx-*|winchip_c6-*|winchip2-*|c3-*)
- target_cpu_default2=TARGET_CPU_DEFAULT_pentium_mmx
- ;;
- *)
- target_cpu_default2=TARGET_CPU_DEFAULT_pentium
- ;;
- esac
- ;;
+ case $target_alias in
+ k6_2-*)
+ target_cpu_default2=TARGET_CPU_DEFAULT_k6_2
+ ;;
+ k6_3-*)
+ target_cpu_default2=TARGET_CPU_DEFAULT_k6_3
+ ;;
+ k6-*)
+ target_cpu_default2=TARGET_CPU_DEFAULT_k6
+ ;;
+ pentium_mmx-*|winchip_c6-*|winchip2-*|c3-*)
+ target_cpu_default2=TARGET_CPU_DEFAULT_pentium_mmx
+ ;;
+ *)
+ target_cpu_default2=TARGET_CPU_DEFAULT_pentium
+ ;;
+ esac
+ ;;
i686-*-* | i786-*-*)
- case $target_alias in
- k8-*)
- target_cpu_default2=TARGET_CPU_DEFAULT_k8
- ;;
- athlon_xp-*|athlon_mp-*|athlon_4-*)
- target_cpu_default2=TARGET_CPU_DEFAULT_athlon_sse
- ;;
- athlon_tbird-*|athlon-*)
- target_cpu_default2=TARGET_CPU_DEFAULT_athlon
- ;;
- pentium2-*)
- target_cpu_default2=TARGET_CPU_DEFAULT_pentium2
- ;;
- pentium3-*)
- target_cpu_default2=TARGET_CPU_DEFAULT_pentium3
- ;;
- pentium4-*)
- target_cpu_default2=TARGET_CPU_DEFAULT_pentium4
- ;;
- *)
- target_cpu_default2=TARGET_CPU_DEFAULT_pentiumpro
- ;;
- esac
- ;;
+ case $target_alias in
+ k8-*)
+ target_cpu_default2=TARGET_CPU_DEFAULT_k8
+ ;;
+ athlon_xp-*|athlon_mp-*|athlon_4-*)
+ target_cpu_default2=TARGET_CPU_DEFAULT_athlon_sse
+ ;;
+ athlon_tbird-*|athlon-*)
+ target_cpu_default2=TARGET_CPU_DEFAULT_athlon
+ ;;
+ pentium2-*)
+ target_cpu_default2=TARGET_CPU_DEFAULT_pentium2
+ ;;
+ pentium3-*)
+ target_cpu_default2=TARGET_CPU_DEFAULT_pentium3
+ ;;
+ pentium4-*)
+ target_cpu_default2=TARGET_CPU_DEFAULT_pentium4
+ ;;
+ *)
+ target_cpu_default2=TARGET_CPU_DEFAULT_pentiumpro
+ ;;
+ esac
+ ;;
x86_64-*-*)
- # We should have hammer chip here, but it does not exist yet and
- # thus it is not supported. Athlon_SSE is probably equivalent feature
- # wise to hammer from our point of view except for 64bit mode.
- target_cpu_default2=TARGET_CPU_DEFAULT_k8
- ;;
+ # We should have hammer chip here, but it does not exist yet and
+ # thus it is not supported. Athlon_SSE is probably equivalent feature
+ # wise to hammer from our point of view except for 64bit mode.
+ target_cpu_default2=TARGET_CPU_DEFAULT_k8
+ ;;
alpha*-*-*)
- case $machine in
- alphaev6[78]*)
- target_cpu_default2="MASK_CPU_EV6|MASK_BWX|MASK_MAX|MASK_FIX|MASK_CIX"
- ;;
- alphaev6*)
- target_cpu_default2="MASK_CPU_EV6|MASK_BWX|MASK_MAX|MASK_FIX"
- ;;
- alphapca56*)
- target_cpu_default2="MASK_CPU_EV5|MASK_BWX|MASK_MAX"
- ;;
- alphaev56*)
- target_cpu_default2="MASK_CPU_EV5|MASK_BWX"
- ;;
- alphaev5*)
- target_cpu_default2="MASK_CPU_EV5"
- ;;
- esac
-
- if test x$gas = xyes
- then
- if test "$target_cpu_default2" = ""
- then
- target_cpu_default2="MASK_GAS"
- else
- target_cpu_default2="${target_cpu_default2}|MASK_GAS"
- fi
- fi
- ;;
+ case $machine in
+ alphaev6[78]*)
+ target_cpu_default2="MASK_CPU_EV6|MASK_BWX|MASK_MAX|MASK_FIX|MASK_CIX"
+ ;;
+ alphaev6*)
+ target_cpu_default2="MASK_CPU_EV6|MASK_BWX|MASK_MAX|MASK_FIX"
+ ;;
+ alphapca56*)
+ target_cpu_default2="MASK_CPU_EV5|MASK_BWX|MASK_MAX"
+ ;;
+ alphaev56*)
+ target_cpu_default2="MASK_CPU_EV5|MASK_BWX"
+ ;;
+ alphaev5*)
+ target_cpu_default2="MASK_CPU_EV5"
+ ;;
+ esac
+
+ if test x$gas = xyes
+ then
+ if test "$target_cpu_default2" = ""
+ then
+ target_cpu_default2="MASK_GAS"
+ else
+ target_cpu_default2="${target_cpu_default2}|MASK_GAS"
+ fi
+ fi
+ ;;
arm*-*-*)
- case "x$with_cpu" in
- x)
- # The most generic
- target_cpu_default2="TARGET_CPU_generic"
- ;;
-
- # Distinguish cores, and major variants
- # arm7m doesn't exist, but D & I don't affect code
- xarm[236789] | xarm250 | xarm[67][01]0 \
- | xarm7m | xarm7dm | xarm7dmi | xarm[79]tdmi \
- | xarm7100 | xarm7500 | xarm7500fe | xarm810 \
- | xxscale \
- | xep9312 \
- | xstrongarm | xstrongarm110 | xstrongarm1100)
- target_cpu_default2="TARGET_CPU_$with_cpu"
- ;;
-
- xyes | xno)
- echo "--with-cpu must be passed a value" 1>&2
- exit 1
- ;;
-
- *)
- if test x$pass2done = xyes
- then
- echo "Unknown cpu used with --with-cpu=$with_cpu" 1>&2
- exit 1
- fi
- ;;
- esac
- case $machine in
- 9ep9312-*-*)
- target_cpu_default2="TARGET_CPU_9ep9312"
- ;;
- esac
- ;;
+ case "x$with_cpu" in
+ x)
+ # The most generic
+ target_cpu_default2="TARGET_CPU_generic"
+ ;;
+
+ # Distinguish cores, and major variants
+ # arm7m doesn't exist, but D & I don't affect code
+ xarm[236789] | xarm250 | xarm[67][01]0 \
+ | xarm7m | xarm7dm | xarm7dmi | xarm[79]tdmi \
+ | xarm7100 | xarm7500 | xarm7500fe | xarm810 \
+ | xxscale \
+ | xep9312 \
+ | xstrongarm | xstrongarm110 | xstrongarm1100)
+ target_cpu_default2="TARGET_CPU_$with_cpu"
+ ;;
+
+ xyes | xno)
+ echo "--with-cpu must be passed a value" 1>&2
+ exit 1
+ ;;
+
+ *)
+ if test x$pass2done = xyes
+ then
+ echo "Unknown cpu used with --with-cpu=$with_cpu" 1>&2
+ exit 1
+ fi
+ ;;
+ esac
+ case $machine in
+ 9ep9312-*-*)
+ target_cpu_default2="TARGET_CPU_9ep9312"
+ ;;
+ esac
+ ;;
hppa*-*-* | parisc*-*-*)
- if test x$gas = xyes
- then
- target_cpu_default2="MASK_GAS|MASK_JUMP_IN_DELAY"
- fi
- case $machine in
- hppa1* | parisc1*)
- tm_defines="TARGET_SCHED_DEFAULT=\\\"7100LC\\\""
- ;;
- esac
- ;;
+ if test x$gas = xyes
+ then
+ target_cpu_default2="MASK_GAS|MASK_JUMP_IN_DELAY"
+ fi
+ case $machine in
+ hppa1* | parisc1*)
+ tm_defines="TARGET_SCHED_DEFAULT=\\\"7100LC\\\""
+ ;;
+ esac
+ ;;
mips*-*-*)
- case $machine in
- mips*-*-ecoff* | mips*-*-elf*)
- if test x$gas = xyes
- then
- if test x$gnu_ld = xyes
- then
- target_cpu_default2="MASK_GAS|MASK_SPLIT_ADDR"
- else
- target_cpu_default2="MASK_GAS"
- fi
- fi
- ;;
- mips*-*-*)
- if test x$gas = xyes
- then
- target_cpu_default2="MASK_GAS"
- fi
- ;;
- esac
- case $machine in
- mips*el-*-*)
- tm_defines="TARGET_ENDIAN_DEFAULT=0 $tm_defines"
- ;;
- esac
- case $tm_file in
- *mips/elf.h* | *mips/elf64.h*)
- tm_defines="OBJECT_FORMAT_ELF $tm_defines"
- ;;
- esac
- if test "x$enable_gofast" = xyes
- then
- tm_defines="INIT_SUBTARGET_OPTABS=INIT_GOFAST_OPTABS $tm_defines"
- tm_file="gofast.h $tm_file"
- tmake_file="mips/t-gofast $tmake_file"
- else
- tmake_file="mips/t-mips $tmake_file"
- fi
- ;;
+ case $machine in
+ mips*-*-ecoff* | mips*-*-elf*)
+ if test x$gas = xyes
+ then
+ if test x$gnu_ld = xyes
+ then
+ target_cpu_default2="MASK_GAS|MASK_SPLIT_ADDR"
+ else
+ target_cpu_default2="MASK_GAS"
+ fi
+ fi
+ ;;
+ mips*-*-*)
+ if test x$gas = xyes
+ then
+ target_cpu_default2="MASK_GAS"
+ fi
+ ;;
+ esac
+ case $machine in
+ mips*el-*-*)
+ tm_defines="TARGET_ENDIAN_DEFAULT=0 $tm_defines"
+ ;;
+ esac
+ case $tm_file in
+ *mips/elf.h* | *mips/elf64.h*)
+ tm_defines="OBJECT_FORMAT_ELF $tm_defines"
+ ;;
+ esac
+ if test "x$enable_gofast" = xyes
+ then
+ tm_defines="INIT_SUBTARGET_OPTABS=INIT_GOFAST_OPTABS $tm_defines"
+ tm_file="gofast.h $tm_file"
+ tmake_file="mips/t-gofast $tmake_file"
+ else
+ tmake_file="mips/t-mips $tmake_file"
+ fi
+ ;;
powerpc*-*-* | rs6000-*-*)
if test x$enable_altivec = xyes
then
tm_file="$tm_file rs6000/altivec-defs.h"
fi
- case "x$with_cpu" in
- x)
- ;;
-
- xcommon | xpowerpc | xpowerpc64 \
- | xpower | xpower2 | xpower3 | xpower4 \
- | xrios | xrios1 | xrios2 | xrsc | xrsc1 | xrs64a \
- | x601 | x602 | x603 | x603e | x604 | x604e | x620 | x630 \
- | x740 | x750 | x7400 | x7450 | x505)
- target_cpu_default2="\\\"$with_cpu\\\""
- ;;
-
- x401 | x403 | x405 | xec603e | x801 | x821 | x823 | x860)
- target_cpu_default2="\\\"$with_cpu\\\""
- ;;
-
- xyes | xno)
- echo "--with-cpu must be passed a value" 1>&2
- exit 1
- ;;
-
- *)
- if test x$pass2done = xyes
- then
- echo "Unknown cpu used with --with-cpu=$with_cpu" 1>&2
- exit 1
- fi
- ;;
- esac
- out_file=rs6000/rs6000.c
- c_target_objs="${c_target_objs} rs6000-c.o"
- cxx_target_objs="${cxx_target_objs} rs6000-c.o"
- tmake_file="rs6000/t-rs6000 ${tmake_file}"
- ;;
+ case "x$with_cpu" in
+ x)
+ ;;
+
+ xcommon | xpowerpc | xpowerpc64 \
+ | xpower | xpower2 | xpower3 | xpower4 \
+ | xrios | xrios1 | xrios2 | xrsc | xrsc1 | xrs64a \
+ | x601 | x602 | x603 | x603e | x604 | x604e | x620 | x630 \
+ | x740 | x750 | x7400 | x7450 | x505)
+ target_cpu_default2="\\\"$with_cpu\\\""
+ ;;
+
+ x401 | x403 | x405 | xec603e | x801 | x821 | x823 | x860)
+ target_cpu_default2="\\\"$with_cpu\\\""
+ ;;
+
+ xyes | xno)
+ echo "--with-cpu must be passed a value" 1>&2
+ exit 1
+ ;;
+
+ *)
+ if test x$pass2done = xyes
+ then
+ echo "Unknown cpu used with --with-cpu=$with_cpu" 1>&2
+ exit 1
+ fi
+ ;;
+ esac
+ out_file=rs6000/rs6000.c
+ c_target_objs="${c_target_objs} rs6000-c.o"
+ cxx_target_objs="${cxx_target_objs} rs6000-c.o"
+ tmake_file="rs6000/t-rs6000 ${tmake_file}"
+ ;;
sparc*-*-*)
- case ".$with_cpu" in
- .)
- target_cpu_default2=TARGET_CPU_"`echo $machine | sed 's/-.*$//'`"
- ;;
- .supersparc | .hypersparc | .ultrasparc | .v7 | .v8 | .v9)
- target_cpu_default2="TARGET_CPU_$with_cpu"
- ;;
- *)
- if test x$pass2done = xyes
- then
- echo "Unknown cpu used with --with-cpu=$with_cpu" 1>&2
- exit 1
- fi
- ;;
- esac
- ;;
+ case ".$with_cpu" in
+ .)
+ target_cpu_default2=TARGET_CPU_"`echo $machine | sed 's/-.*$//'`"
+ ;;
+ .supersparc | .hypersparc | .ultrasparc | .v7 | .v8 | .v9)
+ target_cpu_default2="TARGET_CPU_$with_cpu"
+ ;;
+ *)
+ if test x$pass2done = xyes
+ then
+ echo "Unknown cpu used with --with-cpu=$with_cpu" 1>&2
+ exit 1
+ fi
+ ;;
+ esac
+ ;;
v850*-*-*)
- case "x$with_cpu" in
- x)
- ;;
- xv850e)
- target_cpu_default2="TARGET_CPU_$with_cpu"
- ;;
- *)
- if test x$pass2done = xyes
- then
- echo "Unknown cpu used with --with-cpu=$with_cpu" 1>&2
- exit 1
- fi
- ;;
- esac
- ;;
+ case "x$with_cpu" in
+ x)
+ ;;
+ xv850e)
+ target_cpu_default2="TARGET_CPU_$with_cpu"
+ ;;
+ *)
+ if test x$pass2done = xyes
+ then
+ echo "Unknown cpu used with --with-cpu=$with_cpu" 1>&2
+ exit 1
+ fi
+ ;;
+ esac
+ ;;
esac
if test "$target_cpu_default2" != ""
then
- if test "$target_cpu_default" != ""
- then
- target_cpu_default="(${target_cpu_default}|${target_cpu_default2})"
- else
- target_cpu_default=$target_cpu_default2
- fi
+ if test "$target_cpu_default" != ""
+ then
+ target_cpu_default="(${target_cpu_default}|${target_cpu_default2})"
+ else
+ target_cpu_default=$target_cpu_default2
+ fi
fi
# Save data on machine being used to compile GCC in build_xm_file.
# Save data on host machine in vars host_xm_file and host_xmake_file.
if test x$pass1done = x
then
- if test x$xm_file != x
- then build_xm_file=$xm_file
- fi
- build_xm_defines=$xm_defines
- build_install_headers_dir=$install_headers_dir
- build_exeext=$exeext
- pass1done=yes
+ if test x$xm_file != x
+ then build_xm_file=$xm_file
+ fi
+ build_xm_defines=$xm_defines
+ build_install_headers_dir=$install_headers_dir
+ build_exeext=$exeext
+ pass1done=yes
else
- if test x$pass2done = x
- then
- if test x$xm_file != x
- then host_xm_file=$xm_file
- fi
- host_xm_defines=$xm_defines
- host_xmake_file="$xmake_file"
- host_truncate_target=$truncate_target
- host_extra_gcc_objs=$extra_gcc_objs
- host_extra_objs=$extra_host_objs
- host_exeext=$exeext
- out_host_hook_obj=$host_hook_obj
- pass2done=yes
- fi
+ if test x$pass2done = x
+ then
+ if test x$xm_file != x
+ then host_xm_file=$xm_file
+ fi
+ host_xm_defines=$xm_defines
+ host_xmake_file="$xmake_file"
+ host_truncate_target=$truncate_target
+ host_extra_gcc_objs=$extra_gcc_objs
+ host_extra_objs=$extra_host_objs
+ host_exeext=$exeext
+ out_host_hook_obj=$host_hook_obj
+ pass2done=yes
+ fi
fi
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [patch] config.gcc untabification
2003-03-06 21:17 [patch] config.gcc untabification Nathanael Nerode
@ 2003-03-06 21:54 ` Daniel Jacobowitz
2003-03-07 10:09 ` Alexandre Oliva
1 sibling, 0 replies; 16+ messages in thread
From: Daniel Jacobowitz @ 2003-03-06 21:54 UTC (permalink / raw)
To: gcc-patches
On Thu, Mar 06, 2003 at 04:17:13PM -0500, Nathanael Nerode wrote:
> This does something I've wanted to do for a long time: it removes all those
> damn leading tabs from config.gcc, replacing them with two-space indents.
>
> I know this generates spurious merge problems, but it's so much less
> irritating.
>
> For straightforwardness of evaluation, this doesn't do any other indentation
> cleanup (although there is some I'd like to do.)
>
> * config.gcc: Reindent.
Some of us prefer leading tabs. And it seems to be fairly consistent
about it. What does this buy you? Except causing me another dozen
merge conflicts?
--
Daniel Jacobowitz
MontaVista Software Debian GNU/Linux Developer
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [patch] config.gcc untabification
2003-03-06 21:17 [patch] config.gcc untabification Nathanael Nerode
2003-03-06 21:54 ` Daniel Jacobowitz
@ 2003-03-07 10:09 ` Alexandre Oliva
2003-03-08 20:57 ` Nathanael Nerode
1 sibling, 1 reply; 16+ messages in thread
From: Alexandre Oliva @ 2003-03-07 10:09 UTC (permalink / raw)
To: Nathanael Nerode; +Cc: gcc-patches
On Mar 6, 2003, Nathanael Nerode <neroden@twcny.rr.com> wrote:
> I know this generates spurious merge problems, but it's so much less
> irritating.
I don't think your intolerance to tabs is enough of a justification to
inconvenience anyone who would be trying to merge patches from
mainline to older branches, or maintaining other branches in sync with
mainline. Keep in mind that making code conform to whatever style you
happen to find best today is making the life of all of those who have
got used to the way the file is organized harder. I don't the
improvement, if any, is worth it.
Please don't send more gratuitous reorganizations like these. If you
have a plan and a very good reason for a change, propose it first,
before you spend any time implementing it.
I tried to hint before that they were not welcome, but it seems that
the hint failed, so I had to be more explicit this time. Sorry.
--
Alexandre Oliva Enjoy Guarana', see http://www.ic.unicamp.br/~oliva/
Red Hat GCC Developer aoliva@{redhat.com, gcc.gnu.org}
CS PhD student at IC-Unicamp oliva@{lsd.ic.unicamp.br, gnu.org}
Free Software Evangelist Professional serial bug killer
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [patch] config.gcc untabification
2003-03-07 10:09 ` Alexandre Oliva
@ 2003-03-08 20:57 ` Nathanael Nerode
2003-03-08 21:00 ` Neil Booth
` (2 more replies)
0 siblings, 3 replies; 16+ messages in thread
From: Nathanael Nerode @ 2003-03-08 20:57 UTC (permalink / raw)
To: Alexandre Oliva; +Cc: gcc-patches
Alexandre Oliva wrote:
> On Mar 6, 2003, Nathanael Nerode <neroden@twcny.rr.com> wrote:
>
>
>>I know this generates spurious merge problems, but it's so much less
>>irritating.
>
>
> I don't think your intolerance to tabs is enough of a justification to
> inconvenience anyone who would be trying to merge patches from
> mainline to older branches, or maintaining other branches in sync with
> mainline. Keep in mind that making code conform to whatever style you
> happen to find best today is making the life of all of those who have
I'm actually following the pattern established by the majority of the sh
code in gcc and src, not 'whatever style I happen to find best today'.
> got used to the way the file is organized harder. I don't the
> improvement, if any, is worth it.
Your call.
> Please don't send more gratuitous reorganizations like these. If you
> have a plan and a very good reason for a change, propose it first,
> before you spend any time implementing it.
>
> I tried to hint before that they were not welcome, but it seems that
> the hint failed, so I had to be more explicit this time. Sorry.
I'm not into hints. Thanks for being explicit.
Now to the future.
I would like to make the GCC configure and make files comprehensible on
a single reading (which they are *not* currently). This should also
allow for the removal of a lot of dead code (which cannot currently be
*identified*). This requires a lot of changes which may appear
gratuituous at first glance.
'config.gcc' is sufficiently semi-comprehensible that I see the argument
for leaving it alone. I will not touch it without cleaning up its
moronic indentation 'style', so I will just not touch it. (Which
unfortunately makes cleaning up configure.in significantly more
difficult, but oh well.)
I hope that this does not, however, indicate a prejudice against drastic
stylistic cleanups in configure.in and Makefile.in, both of which are
simply nightmares. I intended to move the bootstrap logic to the top
level as my current project. I was totally stymied in this attempt by
the extraordinarily confusing recursive interactions in gcc's build
scheme, which I am therefore attempting to sort out.
--Nathanael
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [patch] config.gcc untabification
2003-03-08 20:57 ` Nathanael Nerode
@ 2003-03-08 21:00 ` Neil Booth
2003-03-08 21:29 ` Phil Edwards
2003-03-08 22:58 ` Zack Weinberg
2003-03-12 20:17 ` Alexandre Oliva
2 siblings, 1 reply; 16+ messages in thread
From: Neil Booth @ 2003-03-08 21:00 UTC (permalink / raw)
To: Nathanael Nerode; +Cc: Alexandre Oliva, gcc-patches
Nathanael Nerode wrote:-
> I hope that this does not, however, indicate a prejudice against drastic
> stylistic cleanups in configure.in and Makefile.in, both of which are
> simply nightmares. I intended to move the bootstrap logic to the top
> level as my current project. I was totally stymied in this attempt by
> the extraordinarily confusing recursive interactions in gcc's build
> scheme, which I am therefore attempting to sort out.
Please, please do!
Neil.
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [patch] config.gcc untabification
2003-03-08 21:00 ` Neil Booth
@ 2003-03-08 21:29 ` Phil Edwards
0 siblings, 0 replies; 16+ messages in thread
From: Phil Edwards @ 2003-03-08 21:29 UTC (permalink / raw)
To: Neil Booth; +Cc: Nathanael Nerode, Alexandre Oliva, gcc-patches
On Sat, Mar 08, 2003 at 08:59:48PM +0000, Neil Booth wrote:
> Nathanael Nerode wrote:-
>
> > I hope that this does not, however, indicate a prejudice against drastic
> > stylistic cleanups in configure.in and Makefile.in, both of which are
> > simply nightmares. I intended to move the bootstrap logic to the top
> > level as my current project. I was totally stymied in this attempt by
> > the extraordinarily confusing recursive interactions in gcc's build
> > scheme, which I am therefore attempting to sort out.
>
> Please, please do!
Seconded!
Source'ing config.gcc multiple times never seemed like the best possible
practice to me, but I never worked up the gumption to attempt a rewrite.
Phil
--
If ye love wealth greater than liberty, the tranquility of servitude greater
than the animating contest for freedom, go home and leave us in peace. We seek
not your counsel, nor your arms. Crouch down and lick the hand that feeds you;
and may posterity forget that ye were our countrymen. - Samuel Adams
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [patch] config.gcc untabification
2003-03-08 20:57 ` Nathanael Nerode
2003-03-08 21:00 ` Neil Booth
@ 2003-03-08 22:58 ` Zack Weinberg
2003-03-09 0:34 ` Nathanael Nerode
2003-03-12 20:17 ` Alexandre Oliva
2 siblings, 1 reply; 16+ messages in thread
From: Zack Weinberg @ 2003-03-08 22:58 UTC (permalink / raw)
To: Nathanael Nerode; +Cc: Alexandre Oliva, gcc-patches
Nathanael Nerode <neroden@twcny.rr.com> writes:
> Alexandre Oliva wrote:
>> Please don't send more gratuitous reorganizations like these. If you
>> have a plan and a very good reason for a change, propose it first,
>> before you spend any time implementing it.
>> I tried to hint before that they were not welcome, but it seems that
>> the hint failed, so I had to be more explicit this time. Sorry.
> I'm not into hints. Thanks for being explicit.
>
> Now to the future.
>
> I would like to make the GCC configure and make files comprehensible
> on a single reading (which they are *not* currently). This should
> also allow for the removal of a lot of dead code (which cannot
> currently be *identified*). This requires a lot of changes which may
> appear gratuituous at first glance.
>
> 'config.gcc' is sufficiently semi-comprehensible that I see the
> argument for leaving it alone. I will not touch it without cleaning
> up its moronic indentation 'style', so I will just not touch it.
> (Which unfortunately makes cleaning up configure.in significantly more
> difficult, but oh well.)
It would be a shame if a bikeshed argument over indentation styles got
in the way of actual improvements to our configure script and
Makefiles. While I personally do not have a huge problem with the way
config.gcc is indented, if Nathanael wants to reindent config.gcc
before making substantive cleanups to it I think we should let him.
It *is* different from the way configure.in and other shell scripts
are indented, and the long lines *are* annoying to work with.
zw
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [patch] config.gcc untabification
2003-03-08 22:58 ` Zack Weinberg
@ 2003-03-09 0:34 ` Nathanael Nerode
0 siblings, 0 replies; 16+ messages in thread
From: Nathanael Nerode @ 2003-03-09 0:34 UTC (permalink / raw)
To: Zack Weinberg; +Cc: gcc-patches
Zack Weinberg wrote:
> Nathanael Nerode <neroden@twcny.rr.com> writes:
>
>
>>Alexandre Oliva wrote:
>>
>>>Please don't send more gratuitous reorganizations like these. If you
>>>have a plan and a very good reason for a change, propose it first,
>>>before you spend any time implementing it.
>>>I tried to hint before that they were not welcome, but it seems that
>>>the hint failed, so I had to be more explicit this time. Sorry.
>>
>>I'm not into hints. Thanks for being explicit.
>>
>>Now to the future.
>>
>>I would like to make the GCC configure and make files comprehensible
>>on a single reading (which they are *not* currently). This should
>>also allow for the removal of a lot of dead code (which cannot
>>currently be *identified*). This requires a lot of changes which may
>>appear gratuituous at first glance.
>>
>>'config.gcc' is sufficiently semi-comprehensible that I see the
>>argument for leaving it alone. I will not touch it without cleaning
>>up its moronic indentation 'style', so I will just not touch it.
>>(Which unfortunately makes cleaning up configure.in significantly more
>>difficult, but oh well.)
>
>
> It would be a shame if a bikeshed argument over indentation styles got
> in the way of actual improvements to our configure script and
> Makefiles. While I personally do not have a huge problem with the way
> config.gcc is indented, if Nathanael wants to reindent config.gcc
> before making substantive cleanups to it I think we should let him.
> It *is* different from the way configure.in and other shell scripts
> are indented, and the long lines *are* annoying to work with.
I can, however, easily put it off and see if there's a good way to do
stuff without touching it. I'm not offended or anything. :-)
--Nathanael
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [patch] config.gcc untabification
2003-03-08 20:57 ` Nathanael Nerode
2003-03-08 21:00 ` Neil Booth
2003-03-08 22:58 ` Zack Weinberg
@ 2003-03-12 20:17 ` Alexandre Oliva
2 siblings, 0 replies; 16+ messages in thread
From: Alexandre Oliva @ 2003-03-12 20:17 UTC (permalink / raw)
To: Nathanael Nerode; +Cc: gcc-patches
On Mar 8, 2003, Nathanael Nerode <neroden@twcny.rr.com> wrote:
> I'm actually following the pattern established by the majority of the
> sh code in gcc and src, not 'whatever style I happen to find best
> today'.
This was indeed unfair, if not just poorly-chosen vocabulary. I
apologize for that.
>> Please don't send more gratuitous reorganizations like these.
Where `like these', I meant, `that change an entire file, making it
very difficult to merge patches from one branch to another, without
any significant benefit in exchange'. Your smaller, localized
reorganizations and clean-ups of the configure code are definitely
welcome.
> I would like to make the GCC configure and make files comprehensible
> on a single reading (which they are *not* currently).
Agreed. I do see your changes as improvements. It's just this one
bit about reindenting an entire file that makes life exceedingly
difficult for those who maintain branches with changes in these files.
This is definitely not my case, and now I realize I may have been
fighting for ghosts. So I'll suggest that, if anyone's life is
actually going to be made harder by this one-shot indentation change
in config.gcc such that it complies with the style of the rest of the
tree, please speak in, say, the next week. If nobody does, Nathan,
please go ahead and check the patch in.
> I hope that this does not, however, indicate a prejudice against
> drastic stylistic cleanups in configure.in and Makefile.in, both of
> which are simply nightmares.
It's hard to draw a line. I'm open to changes whose improvements I
find easy to grasp. I don't have much of an issue with indentation,
and I know the nightmare it can be to merge changes into a branch
after major style changes, so I may have been too conservative in this
case. It's easier to stop something that may turn out to be bad
before it happens; you can always let it proceed afterwards, but going
back is often harder, if not even more damaging.
> I intended to move the bootstrap logic to the top level as my
> current project.
This is way cool. I'm looking forward to that. Thanks for putting up
with my being so conservative while introducing such major,
long-awaited features :-)
Cheers,
--
Alexandre Oliva Enjoy Guarana', see http://www.ic.unicamp.br/~oliva/
Red Hat GCC Developer aoliva@{redhat.com, gcc.gnu.org}
CS PhD student at IC-Unicamp oliva@{lsd.ic.unicamp.br, gnu.org}
Free Software Evangelist Professional serial bug killer
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [patch] config.gcc untabification
2003-03-06 23:32 Nathanael Nerode
@ 2003-03-07 0:06 ` Diego Novillo
0 siblings, 0 replies; 16+ messages in thread
From: Diego Novillo @ 2003-03-07 0:06 UTC (permalink / raw)
To: Nathanael Nerode; +Cc: drow, gcc-patches
On Thu, 2003-03-06 at 18:32, Nathanael Nerode wrote:
> Denial Jacobowitz said:
> >Then just fix them instead of thrashing the file.
>
> Yeah. OK. Replacing random indents with tabs, when I can't, at sight,
> tell a series of spaces from a tab. Great idea. Not.
>
You can always use ':set list' in vi. It shows you tabs and EOLs.
Diego.
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [patch] config.gcc untabification
@ 2003-03-06 23:32 Nathanael Nerode
2003-03-07 0:06 ` Diego Novillo
0 siblings, 1 reply; 16+ messages in thread
From: Nathanael Nerode @ 2003-03-06 23:32 UTC (permalink / raw)
To: drow; +Cc: gcc-patches
Denial Jacobowitz said:
>Then just fix them instead of thrashing the file.
Yeah. OK. Replacing random indents with tabs, when I can't, at sight,
tell a series of spaces from a tab. Great idea. Not.
--Nathanael
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [patch] config.gcc untabification
2003-03-06 23:10 Nathanael Nerode
@ 2003-03-06 23:13 ` Daniel Jacobowitz
0 siblings, 0 replies; 16+ messages in thread
From: Daniel Jacobowitz @ 2003-03-06 23:13 UTC (permalink / raw)
To: Nathanael Nerode; +Cc: gcc-patches
On Thu, Mar 06, 2003 at 06:09:51PM -0500, Nathanael Nerode wrote:
>
> >I still strongly oppose this sort of patch. You're reindenting a file
> >that isn't violating a well-defined indentation standard. You're
> >touching just about all of the file to do it. Skimming the file, most
> >of the 80-column-violations wouldn't be affected by this anyway, so I
> >don't find that convincing. And I didn't see any blatant deviations
> >from its tab-based indentation style either.
>
> You weren't looking hard enough. There are lots.
Then just fix them instead of thrashing the file.
--
Daniel Jacobowitz
MontaVista Software Debian GNU/Linux Developer
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [patch] config.gcc untabification
@ 2003-03-06 23:10 Nathanael Nerode
2003-03-06 23:13 ` Daniel Jacobowitz
0 siblings, 1 reply; 16+ messages in thread
From: Nathanael Nerode @ 2003-03-06 23:10 UTC (permalink / raw)
To: drow; +Cc: gcc-patches
>I still strongly oppose this sort of patch. You're reindenting a file
>that isn't violating a well-defined indentation standard. You're
>touching just about all of the file to do it. Skimming the file, most
>of the 80-column-violations wouldn't be affected by this anyway, so I
>don't find that convincing. And I didn't see any blatant deviations
>from its tab-based indentation style either.
You weren't looking hard enough. There are lots.
--Nathanael
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [patch] config.gcc untabification
2003-03-06 22:01 Nathanael Nerode
2003-03-06 22:06 ` Daniel Jacobowitz
@ 2003-03-06 22:38 ` DJ Delorie
1 sibling, 0 replies; 16+ messages in thread
From: DJ Delorie @ 2003-03-06 22:38 UTC (permalink / raw)
To: neroden; +Cc: gcc-patches, drow
> Readability. Avoiding going off the 80-column boundary a lot more
> often.
If you're indenting enough to go beyond 80 columns, you're doing
something else wrong ;-)
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [patch] config.gcc untabification
2003-03-06 22:01 Nathanael Nerode
@ 2003-03-06 22:06 ` Daniel Jacobowitz
2003-03-06 22:38 ` DJ Delorie
1 sibling, 0 replies; 16+ messages in thread
From: Daniel Jacobowitz @ 2003-03-06 22:06 UTC (permalink / raw)
To: Nathanael Nerode; +Cc: gcc-patches
On Thu, Mar 06, 2003 at 05:00:46PM -0500, Nathanael Nerode wrote:
> >> * config.gcc: Reindent.
> >
> >Some of us prefer leading tabs. And it seems to be fairly consistent
> >about it. What does this buy you? Except causing me another dozen
> >merge conflicts?
>
> Readability. Avoiding going off the 80-column boundary a lot more
> often.
>
> Without fiddling with tabstop settings in every viewer and editor I use.
>
> And it's only somewhat consistent. My followup patch makes
> the formatting entirely consistent. (Although it seems to be lost in
> the mail. --hiss--)
>
> Feel free to propose an alternative which standardizes everything with
> lots of tabs. I'll oppose it, but it would be better than the current
> state.
>
> There's a moderate amount of stuff which I think can be cleaned up or
> simplified in config.gcc. But I couldn't even stand to *look* at it as
> a whole before style cleanup.
I still strongly oppose this sort of patch. You're reindenting a file
that isn't violating a well-defined indentation standard. You're
touching just about all of the file to do it. Skimming the file, most
of the 80-column-violations wouldn't be affected by this anyway, so I
don't find that convincing. And I didn't see any blatant deviations
from its tab-based indentation style either.
--
Daniel Jacobowitz
MontaVista Software Debian GNU/Linux Developer
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [patch] config.gcc untabification
@ 2003-03-06 22:01 Nathanael Nerode
2003-03-06 22:06 ` Daniel Jacobowitz
2003-03-06 22:38 ` DJ Delorie
0 siblings, 2 replies; 16+ messages in thread
From: Nathanael Nerode @ 2003-03-06 22:01 UTC (permalink / raw)
To: gcc-patches, drow
>> * config.gcc: Reindent.
>
>Some of us prefer leading tabs. And it seems to be fairly consistent
>about it. What does this buy you? Except causing me another dozen
>merge conflicts?
Readability. Avoiding going off the 80-column boundary a lot more
often.
Without fiddling with tabstop settings in every viewer and editor I use.
And it's only somewhat consistent. My followup patch makes
the formatting entirely consistent. (Although it seems to be lost in
the mail. --hiss--)
Feel free to propose an alternative which standardizes everything with
lots of tabs. I'll oppose it, but it would be better than the current
state.
There's a moderate amount of stuff which I think can be cleaned up or
simplified in config.gcc. But I couldn't even stand to *look* at it as
a whole before style cleanup.
--Nathanael
^ permalink raw reply [flat|nested] 16+ messages in thread
end of thread, other threads:[~2003-03-12 20:08 UTC | newest]
Thread overview: 16+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2003-03-06 21:17 [patch] config.gcc untabification Nathanael Nerode
2003-03-06 21:54 ` Daniel Jacobowitz
2003-03-07 10:09 ` Alexandre Oliva
2003-03-08 20:57 ` Nathanael Nerode
2003-03-08 21:00 ` Neil Booth
2003-03-08 21:29 ` Phil Edwards
2003-03-08 22:58 ` Zack Weinberg
2003-03-09 0:34 ` Nathanael Nerode
2003-03-12 20:17 ` Alexandre Oliva
2003-03-06 22:01 Nathanael Nerode
2003-03-06 22:06 ` Daniel Jacobowitz
2003-03-06 22:38 ` DJ Delorie
2003-03-06 23:10 Nathanael Nerode
2003-03-06 23:13 ` Daniel Jacobowitz
2003-03-06 23:32 Nathanael Nerode
2003-03-07 0:06 ` Diego Novillo
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).