* [PATCH] Update libtool to latest git tip (was: Re: Update libtool?)
[not found] ` <48A09ABD.8050903@pogma.com>
@ 2008-08-21 6:03 ` Peter O'Gorman
2008-08-21 14:55 ` [PATCH] Update libtool to latest git tip Paolo Bonzini
0 siblings, 1 reply; 21+ messages in thread
From: Peter O'Gorman @ 2008-08-21 6:03 UTC (permalink / raw)
To: gcc-patches; +Cc: gcc
[-- Attachment #1: Type: text/plain, Size: 4691 bytes --]
On Mon, Aug 11, 2008 at 03:02:05PM -0500, Peter O'Gorman wrote:
> Yes, I tried it also -
> http://pogma.com/misc/gcc-libtool-git20080810.patch (Slight change to
> ltgcc.m4, otherwise git libtool + generated files).
>
> I plan on testing more widely next weekend and proposing a patch the
> following week, regardless of whether libtool-2.2.6 is released. (Unless
> Ralph would prefer to do it?)
>
Hi,
Does not look much like there will be a libtool 2.2.6 release this month.
This patch updates gcc's libtool to latest upstream (generated files not
attached).
Tested by building gcc on i386-linux and i386-darwin9, unfortunately I
did not have time to test build on more systems.
Ok?
Changelog
2008-MM-DD Peter O'Gorman <pogma@thewrittenword.com>
* libtool.m4: Update from libtool tip.
* lt~obsolete.m4: Update from libtool tip.
* ltmain.sh: Update from libtool tip.
* ltsugar.m4: Update from libtool tip.
* ltversion.m4: Update from libtool tip.
* ltoptions.m4: Update from libtool tip.
* ltgcc.m4: Update to reflect changes in libtool tip.
libgomp/Changelog
2008-MM-DD Peter O'Gorman <pogma@thewrittenword.com>
* configure: Regenerate
* Makefile.in: Regenerate
* testsuite/Makefile.in: Regenerate
zlib/ChangeLog.gcj
2008-MM-DD Peter O'Gorman <pogma@thewrittenword.com>
* configure: Regenerate
* Makefile.in: Regenerate
gcc/ChangeLog
2008-MM-DD Peter O'Gorman <pogma@thewrittenword.com>
* configure: Regenerate
* aclocal.m4: Regenerate
* config.in: Regenerate
libstdc++v3/ChangeLog
2008-MM-DD Peter O'Gorman <pogma@thewrittenword.com>
* configure: Regenerate
* Makefile.in: Regenerate
* src/Makefile.in: Regenerate
* doc/Makefile.in: Regenerate
* po/Makefile.in: Regenerate
* libmath/Makefile.in: Regenerate
* include/Makefile.in: Regenerate
* libsupc++/Makefile.in: Regenerate
* testsuite/Makefile.in: Regenerate
* aclocal.m4: Regenerate
libobjc/ChangeLog
2008-MM-DD Peter O'Gorman <pogma@thewrittenword.com>
* configure: Regenerate
* config.h.in: Regenerate
libgfortran/ChangeLog
2008-MM-DD Peter O'Gorman <pogma@thewrittenword.com>
* configure: Regenerate
* Makefile.in: Regenerate
libmudflap/ChangeLog
2008-MM-DD Peter O'Gorman <pogma@thewrittenword.com>
* configure: Regenerate
* Makefile.in: Regenerate
* testsuite/Makefile.in: Regenerate
boehm-gx/ChangeLog
2008-MM-DD Peter O'Gorman <pogma@thewrittenword.com>
* Makefile.in: Regenerate
* include/Makefile.in: Regenerate
* configure: Regenerate
* aclocal.m4: Regenerate
libffi/ChangeLog
2008-MM-DD Peter O'Gorman <pogma@thewrittenword.com>
* configure: Regenerate
* Makefile.in: Regenerate
* include/Makefile.in: Regenerate
* testsuite/Makefile.in: Regenerate
* aclocal.m4: Regenerate
libssp/ChangeLog
2008-MM-DD Peter O'Gorman <pogma@thewrittenword.com>
* configure: Regenerate
* Makefile.in: Regenerate
* aclocal.m4: Regenerate
libjava/ChangeLog
2008-MM-DD Peter O'Gorman <pogma@thewrittenword.com>
* Makefile.in: Regenerate
* include/Makefile.in: Regenerate
* testsuite/Makefile.in: Regenerate
* configure: Regenerate
* gcj/Makefile.in: Regenerate
* aclocal.m4: Regenerate
libjava/classpath/ChangeLog
2008-MM-DD Peter O'Gorman <pogma@thewrittenword.com>
* configure: Regenerate
* Makefile.in: Regenerate
* native/jni/midi-dssi/Makefile.in: Regenerate
* native/jni/gstreamer-peer/Makefile.in: Regenerate
* native/jni/classpath/Makefile.in: Regenerate
* native/jni/Makefile.in: Regenerate
* native/jni/gconf-peer/Makefile.in: Regenerate
* native/jni/java-io/Makefile.in: Regenerate
* native/jni/native-lib/Makefile.in: Regenerate
* native/jni/java-util/Makefile.in: Regenerate
* native/jni/midi-alsa/Makefile.in: Regenerate
* native/jni/java-lang/Makefile.in: Regenerate
* native/jni/java-nio/Makefile.in: Regenerate
* native/jni/java-net/Makefile.in: Regenerate
* native/jni/xmlj/Makefile.in: Regenerate
* native/jni/qt-peer/Makefile.in: Regenerate
* native/jni/gtk-peer/Makefile.in: Regenerate
* native/Makefile.in: Regenerate
* native/jawt/Makefile.in: Regenerate
* native/fdlibm/Makefile.in: Regenerate
* native/plugin/Makefile.in: Regenerate
* resource/Makefile.in: Regenerate
* scripts/Makefile.in: Regenerate
* tools/Makefile.in: Regenerate
* doc/Makefile.in: Regenerate
* doc/api/Makefile.in: Regenerate
* lib/Makefile.in: Regenerate
* external/Makefile.in: Regenerate
* external/jsr166/Makefile.in: Regenerate
* external/sax/Makefile.in: Regenerate
* external/w3c_dom/Makefile.in: Regenerate
* external/relaxngDatatype/Makefile.in: Regenerate
* include/Makefile.in: Regenerate
* aclocal.m4: Regenerate
* examples/Makefile.in: Regenerate
Peter
--
Peter O'Gorman
pogma@thewrittenword.com
[-- Attachment #2: update_libtool.diff --]
[-- Type: text/plain, Size: 219773 bytes --]
Index: ltgcc.m4
===================================================================
--- ltgcc.m4 (revision 139370)
+++ ltgcc.m4 (working copy)
@@ -30,6 +30,7 @@
_LT_LINKER_BOILERPLATE
# Allow CC to be a program name with arguments.
+GCC=yes
compiler=$CC
_LT_TAGVAR(compiler, $1)=$CC
_LT_CC_BASENAME([$compiler])
@@ -49,7 +50,6 @@
_LT_COMPILER_C_O($1)
_LT_COMPILER_FILE_LOCKS($1)
_LT_LINKER_SHLIBS($1)
- _LT_SYS_DYNAMIC_LINKER($1)
_LT_LINKER_HARDCODE_LIBPATH($1)
_LT_CONFIG($1)
Index: libtool.m4
===================================================================
--- libtool.m4 (revision 139370)
+++ libtool.m4 (working copy)
@@ -1,45 +1,43 @@
# libtool.m4 - Configure libtool for the host system. -*-Autoconf-*-
#
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
-# 2006, 2007 Free Software Foundation, Inc.
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
+# 2006, 2007, 2008 Free Software Foundation, Inc.
+# Written by Gordon Matzigkeit, 1996
#
-# This file is part of GNU Libtool:
-# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
-#
# This file is free software; the Free Software Foundation gives
# unlimited permission to copy and/or distribute it, with or without
# modifications, as long as this notice is preserved.
m4_define([_LT_COPYING], [dnl
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
-# 2006, 2007 Free Software Foundation, Inc.
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
+# 2006, 2007, 2008 Free Software Foundation, Inc.
+# Written by Gordon Matzigkeit, 1996
#
-# This file is part of GNU Libtool:
-# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
+# This file is part of GNU Libtool.
#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
#
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
+# As a special exception to the GNU General Public License,
+# if you distribute this file as part of a program or library that
+# is built using GNU Libtool, you may include this file under the
+# same distribution terms that you use for the rest of that program.
#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
# You should have received a copy of the GNU General Public License
-# along with this program; if not, a copy can be downloaded from
-# http://www.gnu.org/copyleft/gpl.html, or by writing to the Free
-# Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
-# MA 02110-1301, USA.
-#
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
+# along with GNU Libtool; see the file COPYING. If not, a copy
+# can be downloaded from http://www.gnu.org/licenses/gpl.html, or
+# obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
])
-# serial 53 LT_INIT
+# serial 56 LT_INIT
# LT_PREREQ(VERSION)
@@ -53,12 +51,25 @@
[$2])])
+# _LT_CHECK_BUILDDIR
+# ------------------
+# Complain if the absolute build directory name contains unusual characters
+m4_defun([_LT_CHECK_BUILDDIR],
+[case `pwd` in
+ *\ * | *\ *)
+ AC_MSG_WARN([Libtool does not cope well with whitespace in `pwd`]) ;;
+esac
+])
+
+
# LT_INIT([OPTIONS])
# ------------------
AC_DEFUN([LT_INIT],
[AC_PREREQ([2.58])dnl We use AC_INCLUDES_DEFAULT
AC_BEFORE([$0], [LT_LANG])dnl
AC_BEFORE([$0], [LT_OUTPUT])dnl
+AC_BEFORE([$0], [LTDL_INIT])dnl
+m4_require([_LT_CHECK_BUILDDIR])dnl
dnl Autoconf doesn't catch unexpanded LT_ macros by default:
m4_pattern_forbid([^_?LT_[A-Z_]+$])dnl
@@ -68,9 +79,12 @@
AC_REQUIRE([LTOPTIONS_VERSION])dnl
AC_REQUIRE([LTSUGAR_VERSION])dnl
AC_REQUIRE([LTVERSION_VERSION])dnl
+AC_REQUIRE([LTOBSOLETE_VERSION])dnl
m4_require([_LT_PROG_LTMAIN])dnl
-m4_require([_LT_SET_OPTIONS], [_LT_SET_OPTIONS([$1])])dnl
+dnl Parse OPTIONS
+_LT_SET_OPTIONS([$0], [$1])
+
# This can be used to rebuild libtool when needed
LIBTOOL_DEPS="$ltmain"
@@ -82,7 +96,7 @@
# Only expand once:
m4_define([LT_INIT])
-])# _LT_INIT
+])# LT_INIT
# Old names:
AU_ALIAS([AC_PROG_LIBTOOL], [LT_INIT])
@@ -141,9 +155,7 @@
_LT_DECL([], [LN_S], [1], [Whether we need soft or hard links])dnl
dnl
AC_REQUIRE([LT_CMD_MAX_LEN])dnl
-AC_REQUIRE([AC_OBJEXT])dnl
_LT_DECL([objext], [ac_objext], [0], [Object file suffix (normally "o")])dnl
-AC_REQUIRE([AC_EXEEXT])dnl
_LT_DECL([], [exeext], [0], [Executable file suffix (normally "")])dnl
dnl
m4_require([_LT_FILEUTILS_DEFAULTS])dnl
@@ -368,12 +380,12 @@
# lt_decl_varnames_tagged([SEPARATOR], [VARNAME1...])
# ---------------------------------------------------
m4_define([lt_decl_varnames_tagged],
-[_$0(m4_quote(m4_default([$1], [[, ]])),
- m4_quote(m4_if([$2], [],
- m4_quote(lt_decl_tag_varnames),
- m4_quote(m4_shift($@)))),
- m4_split(m4_normalize(m4_quote(_LT_TAGS))))])
-m4_define([_lt_decl_varnames_tagged], [lt_combine([$1], [$2], [_], $3)])
+[m4_assert([$# <= 2])dnl
+_$0(m4_quote(m4_default([$1], [[, ]])),
+ m4_ifval([$2], [[$2]], [m4_dquote(lt_decl_tag_varnames)]),
+ m4_split(m4_normalize(m4_quote(_LT_TAGS)), [ ]))])
+m4_define([_lt_decl_varnames_tagged],
+[m4_ifval([$3], [lt_combine([$1], [$2], [_], $3)])])
# lt_decl_all_varnames([SEPARATOR], [VARNAME1...])
@@ -589,7 +601,7 @@
m4_ifset([AC_PACKAGE_VERSION], [ AC_PACKAGE_VERSION])
configured by $[0], generated by m4_PACKAGE_STRING.
-Copyright (C) 2007 Free Software Foundation, Inc.
+Copyright (C) 2008 Free Software Foundation, Inc.
This config.lt script is free software; the Free Software Foundation
gives unlimited permision to copy, distribute and modify it."
@@ -606,10 +618,10 @@
lt_cl_silent=: ;;
-*) AC_MSG_ERROR([unrecognized option: $[1]
-Try `$[0] --help' for more information.]) ;;
+Try \`$[0] --help' for more information.]) ;;
*) AC_MSG_ERROR([unrecognized argument: $[1]
-Try `$[0] --help for more information.]) ;;
+Try \`$[0] --help' for more information.]) ;;
esac
shift
done
@@ -671,7 +683,7 @@
#! $SHELL
# `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
-# Generated automatically by $as_me (GNU $PACKAGE$TIMESTAMP) $VERSION
+# Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION
# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
# NOTE: Changes made to this file will be lost: look at ltmain.sh.
#
@@ -871,10 +883,134 @@
echo "$lt_simple_link_test_code" >conftest.$ac_ext
eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
_lt_linker_boilerplate=`cat conftest.err`
-$RM conftest*
+$RM -r conftest*
])# _LT_LINKER_BOILERPLATE
+# _LT_REQUIRED_DARWIN_CHECKS
+# -------------------------
+m4_defun_once([_LT_REQUIRED_DARWIN_CHECKS],[
+ case $host_os in
+ rhapsody* | darwin*)
+ AC_CHECK_TOOL([DSYMUTIL], [dsymutil], [:])
+ AC_CHECK_TOOL([NMEDIT], [nmedit], [:])
+ AC_CHECK_TOOL([LIPO], [lipo], [:])
+ AC_CHECK_TOOL([OTOOL], [otool], [:])
+ AC_CHECK_TOOL([OTOOL64], [otool64], [:])
+ _LT_DECL([], [DSYMUTIL], [1],
+ [Tool to manipulate archived DWARF debug symbol files on Mac OS X])
+ _LT_DECL([], [NMEDIT], [1],
+ [Tool to change global to local symbols on Mac OS X])
+ _LT_DECL([], [LIPO], [1],
+ [Tool to manipulate fat objects and archives on Mac OS X])
+ _LT_DECL([], [OTOOL], [1],
+ [ldd/readelf like tool for Mach-O binaries on Mac OS X])
+ _LT_DECL([], [OTOOL64], [1],
+ [ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4])
+ AC_CACHE_CHECK([for -single_module linker flag],[lt_cv_apple_cc_single_mod],
+ [lt_cv_apple_cc_single_mod=no
+ if test -z "${LT_MULTI_MODULE}"; then
+ # By default we will add the -single_module flag. You can override
+ # by either setting the environment variable LT_MULTI_MODULE
+ # non-empty at configure time, or by adding -multi_module to the
+ # link flags.
+ rm -rf libconftest.dylib*
+ echo "int foo(void){return 1;}" > conftest.c
+ echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
+-dynamiclib -Wl,-single_module conftest.c" >&AS_MESSAGE_LOG_FD
+ $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
+ -dynamiclib -Wl,-single_module conftest.c 2>conftest.err
+ _lt_result=$?
+ if test -f libconftest.dylib && test ! -s conftest.err && test $_lt_result = 0; then
+ lt_cv_apple_cc_single_mod=yes
+ else
+ cat conftest.err >&AS_MESSAGE_LOG_FD
+ fi
+ rm -rf libconftest.dylib*
+ rm -f conftest.*
+ fi])
+ AC_CACHE_CHECK([for -exported_symbols_list linker flag],
+ [lt_cv_ld_exported_symbols_list],
+ [lt_cv_ld_exported_symbols_list=no
+ save_LDFLAGS=$LDFLAGS
+ echo "_main" > conftest.sym
+ LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym"
+ AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])],
+ [lt_cv_ld_exported_symbols_list=yes],
+ [lt_cv_ld_exported_symbols_list=no])
+ LDFLAGS="$save_LDFLAGS"
+ ])
+ case $host_os in
+ rhapsody* | darwin1.[[012]])
+ _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;;
+ darwin1.*)
+ _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
+ darwin*) # darwin 5.x on
+ # if running on 10.5 or later, the deployment target defaults
+ # to the OS version, if on x86, and 10.4, the deployment
+ # target defaults to 10.4. Don't you love it?
+ case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in
+ 10.0,*86*-darwin8*|10.0,*-darwin[[91]]*)
+ _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
+ 10.[[012]]*)
+ _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
+ 10.*)
+ _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
+ esac
+ ;;
+ esac
+ if test "$lt_cv_apple_cc_single_mod" = "yes"; then
+ _lt_dar_single_mod='$single_module'
+ fi
+ if test "$lt_cv_ld_exported_symbols_list" = "yes"; then
+ _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym'
+ else
+ _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}'
+ fi
+ if test "$DSYMUTIL" != ":"; then
+ _lt_dsymutil='~$DSYMUTIL $lib || :'
+ else
+ _lt_dsymutil=
+ fi
+ ;;
+ esac
+])
+
+
+# _LT_DARWIN_LINKER_FEATURES
+# --------------------------
+# Checks for linker and compiler features on darwin
+m4_defun([_LT_DARWIN_LINKER_FEATURES],
+[
+ m4_require([_LT_REQUIRED_DARWIN_CHECKS])
+ _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+ _LT_TAGVAR(hardcode_direct, $1)=no
+ _LT_TAGVAR(hardcode_automatic, $1)=yes
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
+ _LT_TAGVAR(whole_archive_flag_spec, $1)=''
+ _LT_TAGVAR(link_all_deplibs, $1)=yes
+ _LT_TAGVAR(allow_undefined_flag, $1)="$_lt_dar_allow_undefined"
+ case $cc_basename in
+ ifort*) _lt_dar_can_shared=yes ;;
+ *) _lt_dar_can_shared=$GCC ;;
+ esac
+ if test "$_lt_dar_can_shared" = "yes"; then
+ output_verbose_link_cmd=echo
+ _LT_TAGVAR(archive_cmds, $1)="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
+ _LT_TAGVAR(module_cmds, $1)="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
+ _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
+ _LT_TAGVAR(module_expsym_cmds, $1)="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
+ m4_if([$1], [CXX],
+[ if test "$lt_cv_apple_cc_single_mod" != "yes"; then
+ _LT_TAGVAR(archive_cmds, $1)="\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dsymutil}"
+ _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dar_export_syms}${_lt_dsymutil}"
+ fi
+],[])
+ else
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ fi
+])
+
# _LT_SYS_MODULE_PATH_AIX
# -----------------------
# Links a minimal program and checks the executable
@@ -1075,8 +1211,7 @@
# _LT_ENABLE_LOCK
# ---------------
m4_defun([_LT_ENABLE_LOCK],
-[AC_REQUIRE([AC_OBJEXT])dnl
-AC_ARG_ENABLE([libtool-lock],
+[AC_ARG_ENABLE([libtool-lock],
[AS_HELP_STRING([--disable-libtool-lock],
[avoid locking (might break parallel builds)])])
test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
@@ -1202,7 +1337,11 @@
*64-bit*)
case $lt_cv_prog_gnu_ld in
yes*) LD="${LD-ld} -m elf64_sparc" ;;
- *) LD="${LD-ld} -64" ;;
+ *)
+ if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then
+ LD="${LD-ld} -64"
+ fi
+ ;;
esac
;;
esac
@@ -1234,7 +1373,7 @@
[Commands used to install an old-style archive])
# Determine commands to create old-style static archives.
-old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs'
+old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs'
old_postinstall_cmds='chmod 644 $oldlib'
old_postuninstall_cmds=
@@ -1261,8 +1400,7 @@
# ----------------------------------------------------------------
# Check whether the given compiler option works
AC_DEFUN([_LT_COMPILER_OPTION],
-[AC_REQUIRE([AC_OBJEXT])dnl
-m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
m4_require([_LT_DECL_SED])dnl
AC_CACHE_CHECK([$1], [$2],
[$2=no
@@ -1335,7 +1473,7 @@
$2=yes
fi
fi
- $RM conftest*
+ $RM -r conftest*
LDFLAGS="$save_LDFLAGS"
])
@@ -1378,7 +1516,7 @@
lt_cv_sys_max_cmd_len=-1;
;;
- cygwin* | mingw*)
+ cygwin* | mingw* | cegcc*)
# On Win9x/ME, this test blows up -- it succeeds, but takes
# about 5 minutes as the teststring grows exponentially.
# Worse, since 9x/ME are not pre-emptively multitasking,
@@ -1439,8 +1577,8 @@
fi
;;
*)
- lt_cv_sys_max_cmd_len=`getconf ARG_MAX 2> /dev/null`
- if test -n $lt_cv_sys_max_cmd_len; then
+ lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null`
+ if test -n "$lt_cv_sys_max_cmd_len"; then
lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
else
@@ -1546,10 +1684,6 @@
# endif
#endif
-#ifdef __cplusplus
-extern "C" void exit (int);
-#endif
-
void fnord() { int i=42;}
int main ()
{
@@ -1565,7 +1699,7 @@
else
puts (dlerror ());
- exit (status);
+ return status;
}]
_LT_EOF
if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then
@@ -1604,7 +1738,7 @@
lt_cv_dlopen_self=yes
;;
- mingw* | pw32*)
+ mingw* | pw32* | cegcc*)
lt_cv_dlopen="LoadLibrary"
lt_cv_dlopen_libs=
;;
@@ -1628,7 +1762,7 @@
AC_CHECK_FUNC([shl_load],
[lt_cv_dlopen="shl_load"],
[AC_CHECK_LIB([dld], [shl_load],
- [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-dld"],
+ [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"],
[AC_CHECK_FUNC([dlopen],
[lt_cv_dlopen="dlopen"],
[AC_CHECK_LIB([dl], [dlopen],
@@ -1636,7 +1770,7 @@
[AC_CHECK_LIB([svld], [dlopen],
[lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"],
[AC_CHECK_LIB([dld], [dld_link],
- [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld"])
+ [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"])
])
])
])
@@ -1714,8 +1848,7 @@
# Check to see if options -c and -o are simultaneously supported by compiler.
# This macro does not hard code the compiler like AC_PROG_CC_C_O.
m4_defun([_LT_COMPILER_C_O],
-[AC_REQUIRE([AC_OBJEXT])dnl
-m4_require([_LT_DECL_SED])dnl
+[m4_require([_LT_DECL_SED])dnl
m4_require([_LT_FILEUTILS_DEFAULTS])dnl
m4_require([_LT_TAG_COMPILER])dnl
AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext],
@@ -1902,16 +2035,12 @@
[AC_REQUIRE([AC_CANONICAL_HOST])dnl
m4_require([_LT_DECL_EGREP])dnl
m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_DECL_OBJDUMP])dnl
m4_require([_LT_DECL_SED])dnl
AC_MSG_CHECKING([dynamic linker characteristics])
-m4_case([$1],
- [C], [withGCC=$GCC],
- [CXX], [withGCC=$GXX],
- [F77], [withGCC=$G77],
- [FC], [withGCC=$ac_cv_fc_compiler_gnu],
- [GCJ], [withGCC=$GCC],
- [], [withGCC=$GCC
-if test "$withGCC" = yes; then
+m4_if([$1],
+ [], [
+if test "$GCC" = yes; then
case $host_os in
darwin*) lt_awk_arg="/^libraries:/,/LR/" ;;
*) lt_awk_arg="/^libraries:/" ;;
@@ -1961,8 +2090,7 @@
sys_lib_search_path_spec=`$ECHO $lt_search_path_spec`
else
sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
-fi],
-[withGCC=$GCC])
+fi])
library_names_spec=
libname_spec='lib$name'
soname_spec=
@@ -2038,13 +2166,18 @@
;;
amigaos*)
- if test "$host_cpu" = m68k; then
+ case $host_cpu in
+ powerpc)
+ # Since July 2007 AmigaOS4 officially supports .so libraries.
+ # When compiling the executable, add -use-dynld -Lsobjs: to the compileline.
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ ;;
+ m68k)
library_names_spec='$libname.ixlibrary $libname.a'
# Create ${libname}_ixlibrary.a entries in /sys/libs.
finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$ECHO "X$lib" | $Xsed -e '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
- else
- dynamic_linker=no
- fi
+ ;;
+ esac
;;
beos*)
@@ -2067,14 +2200,14 @@
# libtool to hard-code these into programs
;;
-cygwin* | mingw* | pw32*)
+cygwin* | mingw* | pw32* | cegcc*)
version_type=windows
shrext_cmds=".dll"
need_version=no
need_lib_prefix=no
- case $withGCC,$host_os in
- yes,cygwin* | yes,mingw* | yes,pw32*)
+ case $GCC,$host_os in
+ yes,cygwin* | yes,mingw* | yes,pw32* | yes,cegcc*)
library_names_spec='$libname.dll.a'
# DLL is installed to $(libdir)/../bin by postinstall_cmds
postinstall_cmds='base_file=`basename \${file}`~
@@ -2097,7 +2230,7 @@
soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
;;
- mingw*)
+ mingw* | cegcc*)
# MinGW DLLs use traditional 'lib' prefix
soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
sys_lib_search_path_spec=`$CC -print-search-dirs | $GREP "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
@@ -2140,7 +2273,7 @@
shlibpath_var=DYLD_LIBRARY_PATH
shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
m4_if([$1], [],[
- sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"])
+ sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"])
sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
;;
@@ -2321,13 +2454,13 @@
finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=no
- # Some binutils ld are patched to set DT_RUNPATH
+ # Some binutils ld are patched to set DT_RUNPATH
save_LDFLAGS=$LDFLAGS
save_libdir=$libdir
eval "libdir=/foo; wl=\"$_LT_TAGVAR(lt_prog_compiler_wl, $1)\"; \
LDFLAGS=\"\$LDFLAGS $_LT_TAGVAR(hardcode_libdir_flag_spec, $1)\""
AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])],
- [AS_IF([ ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir"],
+ [AS_IF([ ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null],
[shlibpath_overrides_runpath=yes])])
LDFLAGS=$save_LDFLAGS
libdir=$save_libdir
@@ -2339,7 +2472,7 @@
# Append ld.so.conf contents to the search path
if test -f /etc/ld.so.conf; then
- lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
+ lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
fi
@@ -2523,7 +2656,7 @@
version_type=linux
need_lib_prefix=no
need_version=no
- library_name_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=no
hardcode_into_libs=yes
@@ -2548,6 +2681,13 @@
variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
fi
+if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then
+ sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec"
+fi
+if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then
+ sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec"
+fi
+
_LT_DECL([], [variables_saved_for_relink], [1],
[Variables whose values should be saved in libtool wrapper scripts and
restored at link time])
@@ -2817,6 +2957,7 @@
# -- PORTME fill in with the dynamic library characteristics
m4_defun([_LT_CHECK_MAGIC_METHOD],
[m4_require([_LT_DECL_EGREP])
+m4_require([_LT_DECL_OBJDUMP])
AC_CACHE_CHECK([how to recognize dependent libraries],
lt_cv_deplibs_check_method,
[lt_cv_file_magic_cmd='$MAGIC_CMD'
@@ -2867,6 +3008,12 @@
fi
;;
+cegcc)
+ # use the weaker test based on 'objdump'. See mingw*.
+ lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?'
+ lt_cv_file_magic_cmd='$OBJDUMP -f'
+ ;;
+
darwin* | rhapsody*)
lt_cv_deplibs_check_method=pass_all
;;
@@ -3019,7 +3166,6 @@
# find the pathname to a BSD- or MS-compatible name lister
AC_DEFUN([LT_PATH_NM],
[AC_REQUIRE([AC_PROG_CC])dnl
-AC_REQUIRE([AC_OBJEXT])dnl
AC_CACHE_CHECK([for BSD- or MS-compatible name lister (nm)], lt_cv_path_NM,
[if test -n "$NM"; then
# Let the user override the test.
@@ -3155,7 +3301,6 @@
m4_defun([_LT_CMD_GLOBAL_SYMBOLS],
[AC_REQUIRE([AC_CANONICAL_HOST])dnl
AC_REQUIRE([AC_PROG_CC])dnl
-AC_REQUIRE([AC_OBJEXT])dnl
AC_REQUIRE([LT_PATH_NM])dnl
AC_REQUIRE([LT_PATH_LD])dnl
m4_require([_LT_DECL_SED])dnl
@@ -3180,7 +3325,7 @@
aix*)
symcode='[[BCDT]]'
;;
-cygwin* | mingw* | pw32*)
+cygwin* | mingw* | pw32* | cegcc*)
symcode='[[ABCDGISTW]]'
;;
hpux*)
@@ -3224,6 +3369,7 @@
# Transform an extracted symbol line into symbol name and symbol address
lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (void *) \&\2},/p'"
+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \(lib[[^ ]]*\)$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"lib\2\", (void *) \&\2},/p'"
# Handle CRLF in mingw tool chain
opt_cr=
@@ -3351,7 +3497,7 @@
echo "$progname: failed program was:" >&AS_MESSAGE_LOG_FD
cat conftest.$ac_ext >&5
fi
- rm -f conftest* conftst*
+ rm -rf conftest* conftst*
# Do not use the global_symbol_pipe unless it works.
if test "$pipe_works" = yes; then
@@ -3377,6 +3523,9 @@
_LT_DECL([global_symbol_to_c_name_address],
[lt_cv_sys_global_symbol_to_c_name_address], [1],
[Transform the output of nm in a C name address pair])
+_LT_DECL([global_symbol_to_c_name_address_lib_prefix],
+ [lt_cv_sys_global_symbol_to_c_name_address_lib_prefix], [1],
+ [Transform the output of nm in a C name address pair when lib prefix is needed])
]) # _LT_CMD_GLOBAL_SYMBOLS
@@ -3403,18 +3552,26 @@
_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
fi
;;
+
amigaos*)
- if test "$host_cpu" = m68k; then
- # FIXME: we need at least 68020 code to build shared libraries, but
- # adding the `-m68020' flag to GCC prevents building anything better,
- # like `-m68040'.
- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
- fi
+ case $host_cpu in
+ powerpc)
+ # see comment about AmigaOS4 .so support
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+ ;;
+ m68k)
+ # FIXME: we need at least 68020 code to build shared libraries, but
+ # adding the `-m68020' flag to GCC prevents building anything better,
+ # like `-m68040'.
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
+ ;;
+ esac
;;
+
beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
# PIC is the default for these OSes.
;;
- mingw* | cygwin* | os2* | pw32*)
+ mingw* | cygwin* | os2* | pw32* | cegcc*)
# This hack is so that the source file can tell whether it is being
# built for inclusion in a dll (and should export symbols for example).
# Although the cygwin gcc ignores -fPIC, still need this for old-style
@@ -3441,10 +3598,11 @@
fi
;;
hpux*)
- # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
- # not for PA HP-UX.
+ # PIC is the default for 64-bit PA HP-UX, but not for 32-bit
+ # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag
+ # sets the default TLS model and affects inlining.
case $host_cpu in
- hppa*64*|ia64*)
+ hppa*64*)
;;
*)
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
@@ -3479,16 +3637,6 @@
;;
esac
;;
- darwin*)
- # PIC is the default on this platform
- # Common symbols not allowed in MH_DYLIB files
- case $cc_basename in
- xlc*)
- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-qnocommon'
- _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- ;;
- esac
- ;;
dgux*)
case $cc_basename in
ec++*)
@@ -3552,13 +3700,20 @@
_LT_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
;;
- icpc* | ecpc* )
- # Intel C++
+ ecpc* )
+ # old Intel C++ for x86_64 which still supported -KPIC.
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
_LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
;;
- pgCC*)
+ icpc* )
+ # Intel C++, used to be incompatible with GCC.
+ # ICC 10 doesn't accept -KPIC any more.
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
+ ;;
+ pgCC* | pgcpp*)
# Portland Group C++ compiler
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
@@ -3571,6 +3726,12 @@
_LT_TAGVAR(lt_prog_compiler_pic, $1)=
_LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
;;
+ xlc* | xlC*)
+ # IBM XL 8.0 on PPC
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink'
+ ;;
*)
case `$CC -V 2>&1 | sed 5q` in
*Sun\ C*)
@@ -3699,19 +3860,25 @@
;;
amigaos*)
- if test "$host_cpu" = m68k; then
- # FIXME: we need at least 68020 code to build shared libraries, but
- # adding the `-m68020' flag to GCC prevents building anything better,
- # like `-m68040'.
- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
- fi
+ case $host_cpu in
+ powerpc)
+ # see comment about AmigaOS4 .so support
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+ ;;
+ m68k)
+ # FIXME: we need at least 68020 code to build shared libraries, but
+ # adding the `-m68020' flag to GCC prevents building anything better,
+ # like `-m68040'.
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
+ ;;
+ esac
;;
beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
# PIC is the default for these OSes.
;;
- mingw* | cygwin* | pw32* | os2*)
+ mingw* | cygwin* | pw32* | os2* | cegcc*)
# This hack is so that the source file can tell whether it is being
# built for inclusion in a dll (and should export symbols for example).
# Although the cygwin gcc ignores -fPIC, still need this for old-style
@@ -3727,10 +3894,11 @@
;;
hpux*)
- # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
- # not for PA HP-UX.
+ # PIC is the default for 64-bit PA HP-UX, but not for 32-bit
+ # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag
+ # sets the default TLS model and affects inlining.
case $host_cpu in
- hppa*64*|ia64*)
+ hppa*64*)
# +Z the default
;;
*)
@@ -3779,18 +3947,8 @@
_LT_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
fi
;;
- darwin*)
- # PIC is the default on this platform
- # Common symbols not allowed in MH_DYLIB files
- case $cc_basename in
- xlc*)
- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-qnocommon'
- _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- ;;
- esac
- ;;
- mingw* | cygwin* | pw32* | os2*)
+ mingw* | cygwin* | pw32* | os2* | cegcc*)
# This hack is so that the source file can tell whether it is being
# built for inclusion in a dll (and should export symbols for example).
m4_if([$1], [GCJ], [],
@@ -3821,11 +3979,19 @@
linux* | k*bsd*-gnu)
case $cc_basename in
- icc* | ecc*)
+ # old Intel for x86_64 which still supported -KPIC.
+ ecc*)
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
_LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
;;
+ # icc used to be incompatible with GCC.
+ # ICC 10 doesn't accept -KPIC any more.
+ icc* | ifort*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
+ ;;
pgcc* | pgf77* | pgf90* | pgf95*)
# Portland Group compilers (*not* the Pentium gcc compiler,
# which looks to be a dead project)
@@ -3838,6 +4004,12 @@
# All Alpha code is PIC.
_LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
;;
+ xl*)
+ # IBM XL C 8.0/Fortran 10.1 on PPC
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink'
+ ;;
*)
case `$CC -V 2>&1 | sed 5q` in
*Sun\ C*)
@@ -3948,7 +4120,7 @@
#
if test -n "$_LT_TAGVAR(lt_prog_compiler_pic, $1)"; then
_LT_COMPILER_OPTION([if $compiler PIC flag $_LT_TAGVAR(lt_prog_compiler_pic, $1) works],
- [_LT_TAGVAR(lt_prog_compiler_pic_works, $1)],
+ [_LT_TAGVAR(lt_cv_prog_compiler_pic_works, $1)],
[$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t@m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])], [],
[case $_LT_TAGVAR(lt_prog_compiler_pic, $1) in
"" | " "*) ;;
@@ -3965,7 +4137,7 @@
#
wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1) eval lt_tmp_static_flag=\"$_LT_TAGVAR(lt_prog_compiler_static, $1)\"
_LT_LINKER_OPTION([if $compiler static flag $lt_tmp_static_flag works],
- _LT_TAGVAR(lt_prog_compiler_static_works, $1),
+ _LT_TAGVAR(lt_cv_prog_compiler_static_works, $1),
$lt_tmp_static_flag,
[],
[_LT_TAGVAR(lt_prog_compiler_static, $1)=])
@@ -4001,13 +4173,14 @@
pw32*)
_LT_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds"
;;
- cygwin* | mingw*)
+ cygwin* | mingw* | cegcc*)
_LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;/^.*[[ ]]__nm__/s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols'
;;
*)
_LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
;;
esac
+ _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*']
], [
runpath_var=
_LT_TAGVAR(allow_undefined_flag, $1)=
@@ -4041,16 +4214,18 @@
# it will be wrapped by ` (' and `)$', so one must not match beginning or
# end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
# as well as any symbol that contains `d'.
- _LT_TAGVAR(exclude_expsyms, $1)="_GLOBAL_OFFSET_TABLE_"
+ _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*']
# Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
# platforms (ab)use it in PIC code, but their linkers get confused if
# the symbol is explicitly referenced. Since portable code cannot
# rely on this symbol name, it's probably fine to never include it in
# preloaded symbol tables.
+ # Exclude shared library initialization/finalization symbols.
+dnl Note also adjust exclude_expsyms for C++ above.
extract_expsyms_cmds=
case $host_os in
- cygwin* | mingw* | pw32*)
+ cygwin* | mingw* | pw32* | cegcc*)
# FIXME: the MSVC++ port hasn't been tested in a loooong time
# When not using gcc, we currently assume that we are using
# Microsoft Visual C++.
@@ -4112,19 +4287,18 @@
;;
amigaos*)
- if test "$host_cpu" = m68k; then
- _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
- _LT_TAGVAR(hardcode_minus_L, $1)=yes
- fi
-
- # Samuel A. Falvo II <kc5tja@dolphin.openprojects.net> reports
- # that the semantics of dynamic libraries on AmigaOS, at least up
- # to version 4, is to share data among multiple programs linked
- # with the same dynamic library. Since this doesn't match the
- # behavior of shared libraries on other platforms, we can't use
- # them.
- _LT_TAGVAR(ld_shlibs, $1)=no
+ case $host_cpu in
+ powerpc)
+ # see comment about AmigaOS4 .so support
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)=''
+ ;;
+ m68k)
+ _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes
+ ;;
+ esac
;;
beos*)
@@ -4138,7 +4312,7 @@
fi
;;
- cygwin* | mingw* | pw32*)
+ cygwin* | mingw* | pw32* | cegcc*)
# _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
# as there is no search path for DLLs.
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
@@ -4189,6 +4363,7 @@
&& test "$tmp_diet" = no
then
tmp_addflag=
+ tmp_sharedflag='-shared'
case $cc_basename,$host_cpu in
pgcc*) # Portland Group C compiler
_LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
@@ -4203,6 +4378,9 @@
tmp_addflag=' -i_dynamic -nofor_main' ;;
ifc* | ifort*) # Intel Fortran compiler
tmp_addflag=' -nofor_main' ;;
+ xl[[cC]]*) # IBM XL C 8.0 on PPC (deal with xlf below)
+ tmp_sharedflag='-qmkshrobj'
+ tmp_addflag= ;;
esac
case `$CC -V 2>&1 | sed 5q` in
*Sun\ C*) # Sun C 5.9
@@ -4211,8 +4389,6 @@
tmp_sharedflag='-G' ;;
*Sun\ F*) # Sun Fortran 8.3
tmp_sharedflag='-G' ;;
- *)
- tmp_sharedflag='-shared' ;;
esac
_LT_TAGVAR(archive_cmds, $1)='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
@@ -4222,6 +4398,22 @@
echo "local: *; };" >> $output_objdir/$libname.ver~
$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
fi
+
+ case $cc_basename in
+ xlf*)
+ # IBM XL Fortran 10.1 on PPC cannot create shared libs itself
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='--whole-archive$convenience --no-whole-archive'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
+ _LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='-rpath $libdir'
+ _LT_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $compiler_flags -soname $soname -o $lib'
+ if test "x$supports_anon_versioning" = xyes; then
+ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
+ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+ echo "local: *; };" >> $output_objdir/$libname.ver~
+ $LD -shared $libobjs $deplibs $compiler_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
+ fi
+ ;;
+ esac
else
_LT_TAGVAR(ld_shlibs, $1)=no
fi
@@ -4453,20 +4645,25 @@
;;
amigaos*)
- if test "$host_cpu" = m68k; then
- _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
- _LT_TAGVAR(hardcode_minus_L, $1)=yes
- fi
- # see comment about different semantics on the GNU ld section
- _LT_TAGVAR(ld_shlibs, $1)=no
+ case $host_cpu in
+ powerpc)
+ # see comment about AmigaOS4 .so support
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)=''
+ ;;
+ m68k)
+ _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes
+ ;;
+ esac
;;
bsdi[[45]]*)
_LT_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic
;;
- cygwin* | mingw* | pw32*)
+ cygwin* | mingw* | pw32* | cegcc*)
# When not using gcc, we currently assume that we are using
# Microsoft Visual C++.
# hardcode_libdir_flag_spec is actually meaningless, as there is
@@ -4488,69 +4685,7 @@
;;
darwin* | rhapsody*)
- case $host_os in
- rhapsody* | darwin1.[[012]])
- _LT_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}suppress'
- ;;
- *) # Darwin 1.3 on
- case ${MACOSX_DEPLOYMENT_TARGET-10.0} in
- 10.[[012]])
- _LT_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
- ;;
- 10.*)
- _LT_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}dynamic_lookup'
- ;;
- esac
- ;;
- esac
- _LT_TAGVAR(archive_cmds_need_lc, $1)=no
- _LT_TAGVAR(hardcode_direct, $1)=no
- _LT_TAGVAR(hardcode_automatic, $1)=yes
- _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
- _LT_TAGVAR(whole_archive_flag_spec, $1)=''
- _LT_TAGVAR(link_all_deplibs, $1)=yes
- if test "$GCC" = yes ; then
- AC_CACHE_VAL([lt_cv_apple_cc_single_mod],
- [lt_cv_apple_cc_single_mod=no
- if test -z "${LT_MULTI_MODULE}"; then
- # By default we will add the -single_module flag. You can override
- # by either setting the environment variable LT_MULTI_MODULE
- # non-empty at configure time, or by adding -multi-module to the
- # link flags.
- echo "int foo(void){return 1;}" > conftest.c
- $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
- -dynamiclib ${wl}-single_module conftest.c
- if test -f libconftest.dylib; then
- lt_cv_apple_cc_single_mod=yes
- rm libconftest.dylib
- fi
- rm conftest.$ac_ext
- fi])
- output_verbose_link_cmd=echo
- if test "X$lt_cv_apple_cc_single_mod" = Xyes ; then
- _LT_TAGVAR(archive_cmds, $1)='$CC -dynamiclib $single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
- _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $single_module -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
- else
- _LT_TAGVAR(archive_cmds, $1)='$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
- _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
- fi
- _LT_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
- _LT_TAGVAR(module_expsym_cmds, $1)='sed -e "s,^,_," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
- else
- case $cc_basename in
- xlc*)
- output_verbose_link_cmd=echo
- _LT_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`$ECHO $rpath/$soname` $verstring'
- _LT_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
- # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
- _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
- _LT_TAGVAR(module_expsym_cmds, $1)='sed "s,^,_," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
- ;;
- *)
- _LT_TAGVAR(ld_shlibs, $1)=no
- ;;
- esac
- fi
+ _LT_DARWIN_LINKER_FEATURES($1)
;;
dgux*)
@@ -4632,7 +4767,7 @@
_LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
;;
ia64*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
;;
*)
_LT_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
@@ -4719,25 +4854,29 @@
;;
openbsd*)
- _LT_TAGVAR(hardcode_direct, $1)=yes
- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
- _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
- if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
- else
- case $host_os in
- openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*)
- _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
- ;;
- *)
+ if test -f /usr/libexec/ld.so; then
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+ if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
- ;;
- esac
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+ else
+ case $host_os in
+ openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*)
+ _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+ ;;
+ *)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+ ;;
+ esac
+ fi
+ else
+ _LT_TAGVAR(ld_shlibs, $1)=no
fi
;;
@@ -5471,7 +5610,7 @@
esac
;;
- cygwin* | mingw* | pw32*)
+ cygwin* | mingw* | pw32* | cegcc*)
# _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
# as there is no search path for DLLs.
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
@@ -5495,71 +5634,7 @@
fi
;;
darwin* | rhapsody*)
- case $host_os in
- rhapsody* | darwin1.[[012]])
- _LT_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}suppress'
- ;;
- *) # Darwin 1.3 on
- case ${MACOSX_DEPLOYMENT_TARGET-10.0} in
- 10.[[012]])
- _LT_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
- ;;
- 10.*)
- _LT_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}dynamic_lookup'
- ;;
- esac
- ;;
- esac
- _LT_TAGVAR(archive_cmds_need_lc, $1)=no
- _LT_TAGVAR(hardcode_direct, $1)=no
- _LT_TAGVAR(hardcode_automatic, $1)=yes
- _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
- _LT_TAGVAR(whole_archive_flag_spec, $1)=''
- _LT_TAGVAR(link_all_deplibs, $1)=yes
-
- if test "$GXX" = yes ; then
- AC_CACHE_VAL([lt_cv_apple_cc_single_mod],
- [lt_cv_apple_cc_single_mod=no
- if test -z "${LT_MULTI_MODULE}"; then
- # By default we will add the -single_module flag. You can override
- # by either setting the environment variable LT_MULTI_MODULE
- # non-empty at configure time, or by adding -multi-module to the
- # link flags.
- echo "int foo(void){return 1;}" > conftest.c
- $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
- -dynamiclib ${wl}-single_module conftest.c
- if test -f libconftest.dylib; then
- lt_cv_apple_cc_single_mod=yes
- rm libconftest.dylib
- fi
- rm conftest.$ac_ext
- fi])
- output_verbose_link_cmd=echo
- if test "X$lt_cv_apple_cc_single_mod" = Xyes ; then
- _LT_TAGVAR(archive_cmds, $1)='$CC -dynamiclib $single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
- _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
- else
- _LT_TAGVAR(archive_cmds, $1)='$CC -r -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
- _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -r -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
- fi
- _LT_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
- _LT_TAGVAR(module_expsym_cmds, $1)='sed "s,^,_," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
- else
- case $cc_basename in
- xlc*)
- output_verbose_link_cmd=echo
- _LT_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`$ECHO "$rpath/$soname"` $verstring'
- _LT_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
- # Don't fix this by using the ld -exported_symbols_list flag,
- # it doesn't exist in older darwin lds
- _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
- _LT_TAGVAR(module_expsym_cmds, $1)='sed "s,^,_," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
- ;;
- *)
- _LT_TAGVAR(ld_shlibs, $1)=no
- ;;
- esac
- fi
+ _LT_DARWIN_LINKER_FEATURES($1)
;;
dgux*)
@@ -5807,10 +5882,10 @@
_LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
_LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
;;
- pgCC*)
+ pgCC* | pgcpp*)
# Portland Group C++ compiler
case `$CC -V` in
- *pgCC\ [[1-5]]*)
+ *pgCC\ [[1-5]]* | *pgcpp\ [[1-5]]*)
_LT_TAGVAR(prelink_cmds, $1)='tpldir=Template.dir~
rm -rf $tpldir~
$CC --prelink_objects --instantiation_dir $tpldir $objs $libobjs $compile_deplibs~
@@ -5858,6 +5933,18 @@
# dependencies.
output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`$ECHO "X$templist" | $Xsed -e "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
;;
+ xl*)
+ # IBM XL 8.0 on PPC, with GNU ld
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ if test "x$supports_anon_versioning" = xyes; then
+ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
+ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+ echo "local: *; };" >> $output_objdir/$libname.ver~
+ $CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
+ fi
+ ;;
*)
case `$CC -V 2>&1 | sed 5q` in
*Sun\ C*)
@@ -5930,17 +6017,21 @@
;;
openbsd*)
- _LT_TAGVAR(hardcode_direct, $1)=yes
- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
- _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib'
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
- _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+ if test -f /usr/libexec/ld.so; then
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+ if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+ _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+ fi
+ output_verbose_link_cmd=echo
+ else
+ _LT_TAGVAR(ld_shlibs, $1)=no
fi
- output_verbose_link_cmd=echo
;;
osf3* | osf4* | osf5*)
@@ -6302,12 +6393,7 @@
# the conftest object file.
pre_test_object_deps_done=no
- # The `*' in the case matches for architectures that use `case' in
- # $output_verbose_cmd can trigger glob expansion during the loop
- # eval without this substitution.
- output_verbose_link_cmd=`$ECHO "X$output_verbose_link_cmd" | $Xsed -e "$no_glob_subst"`
-
- for p in `eval $output_verbose_link_cmd`; do
+ for p in `eval "$output_verbose_link_cmd"`; do
case $p in
-L* | -R* | -l*)
@@ -6442,6 +6528,12 @@
case " $_LT_TAGVAR(postdeps, $1) " in
*" -lc "*) _LT_TAGVAR(archive_cmds_need_lc, $1)=no ;;
esac
+ _LT_TAGVAR(compiler_lib_search_dirs, $1)=
+if test -n "${_LT_TAGVAR(compiler_lib_search_path, $1)}"; then
+ _LT_TAGVAR(compiler_lib_search_dirs, $1)=`echo " ${_LT_TAGVAR(compiler_lib_search_path, $1)}" | ${SED} -e 's! -L! !g' -e 's!^ !!'`
+fi
+_LT_TAGDECL([], [compiler_lib_search_dirs], [1],
+ [The directories searched by this compiler when creating a shared library])
_LT_TAGDECL([], [predep_objects], [1],
[Dependencies to place before and after the objects being linked to
create a shared library])
@@ -6536,11 +6628,12 @@
# Allow CC to be a program name with arguments.
lt_save_CC="$CC"
+ lt_save_GCC=$GCC
CC=${F77-"f77"}
compiler=$CC
_LT_TAGVAR(compiler, $1)=$CC
_LT_CC_BASENAME([$compiler])
-
+ GCC=$G77
if test -n "$compiler"; then
AC_MSG_CHECKING([if libtool supports shared libraries])
AC_MSG_RESULT([$can_build_shared])
@@ -6588,6 +6681,7 @@
_LT_CONFIG($1)
fi # test -n "$compiler"
+ GCC=$lt_save_GCC
CC="$lt_save_CC"
fi # test "$_lt_disable_F77" != yes
@@ -6677,8 +6771,11 @@
# Allow CC to be a program name with arguments.
lt_save_CC="$CC"
+ lt_save_GCC=$GCC
CC=${FC-"f95"}
compiler=$CC
+ GCC=$ac_cv_fc_compiler_gnu
+
_LT_TAGVAR(compiler, $1)=$CC
_LT_CC_BASENAME([$compiler])
@@ -6730,6 +6827,7 @@
_LT_CONFIG($1)
fi # test -n "$compiler"
+ GCC=$lt_save_GCC
CC="$lt_save_CC"
fi # test "$_lt_disable_FC" != yes
@@ -6768,9 +6866,12 @@
# Allow CC to be a program name with arguments.
lt_save_CC="$CC"
+lt_save_GCC=$GCC
+GCC=yes
CC=${GCJ-"gcj"}
compiler=$CC
_LT_TAGVAR(compiler, $1)=$CC
+_LT_TAGVAR(LD, $1)="$LD"
_LT_CC_BASENAME([$compiler])
# GCJ did not exist at the time GCC didn't implicitly link libc in.
@@ -6788,13 +6889,14 @@
_LT_COMPILER_C_O($1)
_LT_COMPILER_FILE_LOCKS($1)
_LT_LINKER_SHLIBS($1)
- _LT_SYS_DYNAMIC_LINKER($1)
_LT_LINKER_HARDCODE_LIBPATH($1)
_LT_CONFIG($1)
fi
AC_LANG_RESTORE
+
+GCC=$lt_save_GCC
CC="$lt_save_CC"
])# _LT_LANG_GCJ_CONFIG
@@ -6830,6 +6932,8 @@
# Allow CC to be a program name with arguments.
lt_save_CC="$CC"
+lt_save_GCC=$GCC
+GCC=
CC=${RC-"windres"}
compiler=$CC
_LT_TAGVAR(compiler, $1)=$CC
@@ -6841,6 +6945,7 @@
_LT_CONFIG($1)
fi
+GCC=$lt_save_GCC
AC_LANG_RESTORE
CC="$lt_save_CC"
])# _LT_LANG_RC_CONFIG
@@ -6890,6 +6995,18 @@
])
+# _LT_DECL_OBJDUMP
+# --------------
+# If we don't have a new enough Autoconf to choose the best objdump
+# available, choose the one first in the user's PATH.
+m4_defun([_LT_DECL_OBJDUMP],
+[AC_CHECK_TOOL(OBJDUMP, objdump, false)
+test -z "$OBJDUMP" && OBJDUMP=objdump
+_LT_DECL([], [OBJDUMP], [1], [An object symbol dumper])
+AC_SUBST([OBJDUMP])
+])
+
+
# _LT_DECL_SED
# ------------
# Check for a fully-functional sed program, that truncates
@@ -6983,7 +7100,9 @@
xsi_shell=no
( _lt_dummy="a/b/c"
test "${_lt_dummy##*/},${_lt_dummy%/*},"${_lt_dummy%"$_lt_dummy"}, \
- = c,a/b,, ) >/dev/null 2>&1 \
+ = c,a/b,, \
+ && eval 'test $(( 1 + 1 )) -eq 2 \
+ && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \
&& xsi_shell=yes
AC_MSG_RESULT([$xsi_shell])
_LT_CONFIG_LIBTOOL_INIT([xsi_shell='$xsi_shell'])
@@ -7027,6 +7146,7 @@
[case $xsi_shell in
yes)
cat << \_LT_EOF >> "$cfgfile"
+
# func_dirname file append nondir_replacement
# Compute the dirname of FILE. If nonempty, add APPEND to the result,
# otherwise set result to NONDIR_REPLACEMENT.
@@ -7044,6 +7164,27 @@
func_basename_result="${1##*/}"
}
+# func_dirname_and_basename file append nondir_replacement
+# perform func_basename and func_dirname in a single function
+# call:
+# dirname: Compute the dirname of FILE. If nonempty,
+# add APPEND to the result, otherwise set result
+# to NONDIR_REPLACEMENT.
+# value returned in "$func_dirname_result"
+# basename: Compute filename of FILE.
+# value retuned in "$func_basename_result"
+# Implementation must be kept synchronized with func_dirname
+# and func_basename. For efficiency, we do not delegate to
+# those functions but instead duplicate the functionality here.
+func_dirname_and_basename ()
+{
+ case ${1} in
+ */*) func_dirname_result="${1%/*}${2}" ;;
+ * ) func_dirname_result="${3}" ;;
+ esac
+ func_basename_result="${1##*/}"
+}
+
# func_stripname prefix suffix name
# strip PREFIX and SUFFIX off of NAME.
# PREFIX and SUFFIX must not contain globbing or regex special
@@ -7073,10 +7214,31 @@
*) func_lo2o_result=${1} ;;
esac
}
+
+# func_xform libobj-or-source
+func_xform ()
+{
+ func_xform_result=${1%.*}.lo
+}
+
+# func_arith arithmetic-term...
+func_arith ()
+{
+ func_arith_result=$(( $[*] ))
+}
+
+# func_len string
+# STRING may not start with a hyphen.
+func_len ()
+{
+ func_len_result=${#1}
+}
+
_LT_EOF
;;
*) # Bourne compatible functions.
cat << \_LT_EOF >> "$cfgfile"
+
# func_dirname file append nondir_replacement
# Compute the dirname of FILE. If nonempty, add APPEND to the result,
# otherwise set result to NONDIR_REPLACEMENT.
@@ -7097,6 +7259,10 @@
func_basename_result=`$ECHO "X${1}" | $Xsed -e "$basename"`
}
+dnl func_dirname_and_basename
+dnl A portable version of this function is already defined in general.m4sh
+dnl so there is no need for it here.
+
# func_stripname prefix suffix name
# strip PREFIX and SUFFIX off of NAME.
# PREFIX and SUFFIX must not contain globbing or regex special
@@ -7129,6 +7295,26 @@
{
func_lo2o_result=`$ECHO "X${1}" | $Xsed -e "$lo2o"`
}
+
+# func_xform libobj-or-source
+func_xform ()
+{
+ func_xform_result=`$ECHO "X${1}" | $Xsed -e 's/\.[[^.]]*$/.lo/'`
+}
+
+# func_arith arithmetic-term...
+func_arith ()
+{
+ func_arith_result=`expr "$[@]"`
+}
+
+# func_len string
+# STRING may not start with a hyphen.
+func_len ()
+{
+ func_len_result=`expr "$[1]" : ".*" 2>/dev/null || echo $max_cmd_len`
+}
+
_LT_EOF
esac
@@ -7153,6 +7339,7 @@
{
eval "$[1]=\$$[1]\$[2]"
}
+
_LT_EOF
;;
esac
Index: lt~obsolete.m4
===================================================================
--- lt~obsolete.m4 (revision 139370)
+++ lt~obsolete.m4 (working copy)
@@ -1,13 +1,13 @@
# lt~obsolete.m4 -- aclocal satisfying obsolete definitions. -*-Autoconf-*-
#
-# Copyright (C) 2004, 2005 Free Software Foundation, Inc.
-# Written by Scott James Remnant.
+# Copyright (C) 2004, 2005, 2007 Free Software Foundation, Inc.
+# Written by Scott James Remnant, 2004.
#
# This file is free software; the Free Software Foundation gives
# unlimited permission to copy and/or distribute it, with or without
# modifications, as long as this notice is preserved.
-# serial 2
+# serial 4 lt~obsolete.m4
# These exist entirely to fool aclocal when bootstrapping libtool.
#
@@ -32,6 +32,9 @@
# we give up compatibility with versions before 1.7, at which point
# we need to keep only those names which we still refer to.
+# This is to help aclocal find these macros, as it can't see m4_define.
+AC_DEFUN([LTOBSOLETE_VERSION], [m4_if([1])])
+
m4_ifndef([AC_LIBTOOL_LINKER_OPTION], [AC_DEFUN([AC_LIBTOOL_LINKER_OPTION])])
m4_ifndef([AC_PROG_EGREP], [AC_DEFUN([AC_PROG_EGREP])])
m4_ifndef([_LT_AC_PROG_ECHO_BACKSLASH], [AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH])])
Index: ltmain.sh
===================================================================
--- ltmain.sh (revision 139370)
+++ ltmain.sh (working copy)
@@ -1,30 +1,32 @@
-# Generated from ltmain.m4sh; do not edit by hand
+# Generated from ltmain.m4sh.
-# ltmain.sh (GNU libtool 1.2435 2007/03/18 18:44:42) 2.1a
+# ltmain.sh (GNU libtool 1.3002 2008-08-12) 2.2.5a
# Written by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006, 2007 Free Software Foundation, Inc.
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006, 2007 2008 Free Software Foundation, Inc.
# This is free software; see the source for copying conditions. There is NO
# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-# This program is free software; you can redistribute it and/or modify
+# GNU Libtool is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
-# This program is distributed in the hope that it will be useful, but
+# As a special exception to the GNU General Public License,
+# if you distribute this file as part of a program or library that
+# is built using GNU Libtool, you may include this file under the
+# same distribution terms that you use for the rest of that program.
+#
+# GNU Libtool is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
-#
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
+# along with GNU Libtool; see the file COPYING. If not, a copy
+# can be downloaded from http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
# Usage: $progname [OPTION]... [MODE-ARG]...
#
@@ -63,7 +65,7 @@
# compiler: $LTCC
# compiler flags: $LTCFLAGS
# linker: $LD (gnu? $with_gnu_ld)
-# $progname: (GNU libtool 1.2435 2007/03/18 18:44:42) 2.1a
+# $progname: (GNU libtool 1.3002 2008-08-12) 2.2.5a
# automake: $automake_version
# autoconf: $autoconf_version
#
@@ -71,9 +73,9 @@
PROGRAM=ltmain.sh
PACKAGE=libtool
-VERSION=2.1a
-TIMESTAMP=" 1.2435 2007/03/18 18:44:42"
-package_revision=1.2435
+VERSION=2.2.5a
+TIMESTAMP=" 1.3002 2008-08-12"
+package_revision=1.3002
# Be Bourne compatible
if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
@@ -93,12 +95,16 @@
# Only set LANG and LC_ALL to C if already set.
# These must not be set unconditionally because not all systems understand
# e.g. LANG=C (notably SCO).
-for lt_var in LANG LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
+lt_user_locale=
+lt_safe_locale=
+for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
do
eval "if test \"\${$lt_var+set}\" = set; then
save_$lt_var=\$$lt_var
$lt_var=C
export $lt_var
+ lt_user_locale=\"$lt_var=\\\$save_\$lt_var; \$lt_user_locale\"
+ lt_safe_locale=\"$lt_var=C; \$lt_safe_locale\"
fi"
done
@@ -110,15 +116,15 @@
: ${CP="cp -f"}
: ${ECHO="echo"}
-: ${EGREP="/bin/grep -E"}
-: ${FGREP="/bin/grep -F"}
-: ${GREP="/bin/grep"}
+: ${EGREP="egrep"}
+: ${FGREP="fgrep"}
+: ${GREP="grep"}
: ${LN_S="ln -s"}
: ${MAKE="make"}
: ${MKDIR="mkdir"}
: ${MV="mv -f"}
: ${RM="rm -f"}
-: ${SED="/bin/sed"}
+: ${SED="sed"}
: ${SHELL="${CONFIG_SHELL-/bin/sh}"}
: ${Xsed="$SED -e 1s/^X//"}
@@ -138,6 +144,32 @@
dirname="s,/[^/]*$,,"
basename="s,^.*/,,"
+# func_dirname_and_basename file append nondir_replacement
+# perform func_basename and func_dirname in a single function
+# call:
+# dirname: Compute the dirname of FILE. If nonempty,
+# add APPEND to the result, otherwise set result
+# to NONDIR_REPLACEMENT.
+# value returned in "$func_dirname_result"
+# basename: Compute filename of FILE.
+# value retuned in "$func_basename_result"
+# Implementation must be kept synchronized with func_dirname
+# and func_basename. For efficiency, we do not delegate to
+# those functions but instead duplicate the functionality here.
+func_dirname_and_basename ()
+{
+ # Extract subdirectory from the argument.
+ func_dirname_result=`$ECHO "X${1}" | $Xsed -e "$dirname"`
+ if test "X$func_dirname_result" = "X${1}"; then
+ func_dirname_result="${3}"
+ else
+ func_dirname_result="$func_dirname_result${2}"
+ fi
+ func_basename_result=`$ECHO "X${1}" | $Xsed -e "$basename"`
+}
+
+# Generated shell functions inserted here.
+
# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh
# is ksh but when the shell is invoked as "sh" and the current value of
# the _XPG environment variable is not equal to 1 (one), the special
@@ -148,13 +180,17 @@
# The name of this program:
# In the unlikely event $progname began with a '-', it would play havoc with
# func_echo (imagine progname=-n), so we prepend ./ in that case:
-progname=`$ECHO "X$progpath" | $Xsed -e "$basename" -e 's,^-,./-,'`
+func_dirname_and_basename "$progpath"
+progname=$func_basename_result
+case $progname in
+ -*) progname=./$progname ;;
+esac
# Make sure we have an absolute path for reexecution:
case $progpath in
[\\/]*|[A-Za-z]:\\*) ;;
*[\\/]*)
- progdir=`$ECHO "X$progpath" | $Xsed -e "$dirname"`
+ progdir=$func_dirname_result
progdir=`cd "$progdir" && pwd`
progpath="$progdir/$progname"
;;
@@ -200,13 +236,14 @@
opt_help=false
opt_quiet=false
opt_verbose=false
+opt_warning=:
# func_echo arg...
# Echo program name prefixed message, along with the current mode
# name if it has been set yet.
func_echo ()
{
- $ECHO "$progname${mode+: }$mode: "${1+"$@"}
+ $ECHO "$progname${mode+: }$mode: $*"
}
# func_verbose arg...
@@ -232,7 +269,10 @@
# Echo program name prefixed warning message to standard error.
func_warning ()
{
- $ECHO "$progname${mode+: }$mode: warning: "${1+"$@"} 1>&2
+ $opt_warning && $ECHO "$progname${mode+: }$mode: warning: "${1+"$@"} 1>&2
+
+ # bash bug again:
+ :
}
# func_fatal_error arg...
@@ -423,9 +463,35 @@
}
+# func_show_eval_locale cmd [fail_exp]
+# Unless opt_silent is true, then output CMD. Then, if opt_dryrun is
+# not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP
+# is given, then evaluate it. Use the saved locale for evaluation.
+func_show_eval_locale ()
+{
+ my_cmd="$1"
+ my_fail_exp="${2-:}"
+ ${opt_silent-false} || {
+ func_quote_for_expand "$my_cmd"
+ eval "func_echo $func_quote_for_expand_result"
+ }
+ if ${opt_dry_run-false}; then :; else
+ eval "$lt_user_locale
+ $my_cmd"
+ my_status=$?
+ eval "$lt_safe_locale"
+ if test "$my_status" -eq 0; then :; else
+ eval "(exit $my_status); $my_fail_exp"
+ fi
+ fi
+}
+
+
+
+
# func_version
# Echo version message to standard output and exit.
func_version ()
@@ -515,8 +581,8 @@
fi
magic="%%%MAGIC variable%%%"
+magic_exe="%%%MAGIC EXE variable%%%"
-
# Global variables.
# $mode is unset
nonopt=
@@ -626,191 +692,6 @@
esac
}
-
-func_mode_help ()
-{
- # We need to display help for each of the modes.
- case $mode in
- "")
- # Generic help is extracted from the usage comments
- # at the start of this file.
- func_help
- ;;
-
- clean)
- $ECHO \
-"Usage: $progname [OPTION]... --mode=clean RM [RM-OPTION]... FILE...
-
-Remove files from the build directory.
-
-RM is the name of the program to use to delete files associated with each FILE
-(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed
-to RM.
-
-If FILE is a libtool library, object or program, all the files associated
-with it are deleted. Otherwise, only FILE itself is deleted using RM."
- ;;
-
- compile)
- $ECHO \
-"Usage: $progname [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE
-
-Compile a source file into a libtool library object.
-
-This mode accepts the following additional options:
-
- -o OUTPUT-FILE set the output file name to OUTPUT-FILE
- -no-suppress do not suppress compiler output for multiple passes
- -prefer-pic try to building PIC objects only
- -prefer-non-pic try to building non-PIC objects only
- -shared do not build a \`.o' file suitable for static linking
- -static only build a \`.o' file suitable for static linking
-
-COMPILE-COMMAND is a command to be used in creating a \`standard' object file
-from the given SOURCEFILE.
-
-The output file name is determined by removing the directory component from
-SOURCEFILE, then substituting the C source code suffix \`.c' with the
-library object suffix, \`.lo'."
- ;;
-
- execute)
- $ECHO \
-"Usage: $progname [OPTION]... --mode=execute COMMAND [ARGS]...
-
-Automatically set library path, then run a program.
-
-This mode accepts the following additional options:
-
- -dlopen FILE add the directory containing FILE to the library path
-
-This mode sets the library path environment variable according to \`-dlopen'
-flags.
-
-If any of the ARGS are libtool executable wrappers, then they are translated
-into their corresponding uninstalled binary, and any of their required library
-directories are added to the library path.
-
-Then, COMMAND is executed, with ARGS as arguments."
- ;;
-
- finish)
- $ECHO \
-"Usage: $progname [OPTION]... --mode=finish [LIBDIR]...
-
-Complete the installation of libtool libraries.
-
-Each LIBDIR is a directory that contains libtool libraries.
-
-The commands that this mode executes may require superuser privileges. Use
-the \`--dry-run' option if you just want to see what would be executed."
- ;;
-
- install)
- $ECHO \
-"Usage: $progname [OPTION]... --mode=install INSTALL-COMMAND...
-
-Install executables or libraries.
-
-INSTALL-COMMAND is the installation command. The first component should be
-either the \`install' or \`cp' program.
-
-The following components of INSTALL-COMMAND are treated specially:
-
- -inst-prefix PREFIX-DIR Use PREFIX-DIR as a staging area for installation
-
-The rest of the components are interpreted as arguments to that command (only
-BSD-compatible install options are recognized)."
- ;;
-
- link)
- $ECHO \
-"Usage: $progname [OPTION]... --mode=link LINK-COMMAND...
-
-Link object files or libraries together to form another library, or to
-create an executable program.
-
-LINK-COMMAND is a command using the C compiler that you would use to create
-a program from several object files.
-
-The following components of LINK-COMMAND are treated specially:
-
- -all-static do not do any dynamic linking at all
- -avoid-version do not add a version suffix if possible
- -dlopen FILE \`-dlpreopen' FILE if it cannot be dlopened at runtime
- -dlpreopen FILE link in FILE and add its symbols to lt_preloaded_symbols
- -export-dynamic allow symbols from OUTPUT-FILE to be resolved with dlsym(3)
- -export-symbols SYMFILE
- try to export only the symbols listed in SYMFILE
- -export-symbols-regex REGEX
- try to export only the symbols matching REGEX
- -LLIBDIR search LIBDIR for required installed libraries
- -lNAME OUTPUT-FILE requires the installed library libNAME
- -module build a library that can dlopened
- -no-fast-install disable the fast-install mode
- -no-install link a not-installable executable
- -no-undefined declare that a library does not refer to external symbols
- -o OUTPUT-FILE create OUTPUT-FILE from the specified objects
- -objectlist FILE Use a list of object files found in FILE to specify objects
- -precious-files-regex REGEX
- don't remove output files matching REGEX
- -release RELEASE specify package release information
- -rpath LIBDIR the created library will eventually be installed in LIBDIR
- -R[ ]LIBDIR add LIBDIR to the runtime path of programs and libraries
- -shared only do dynamic linking of libtool libraries
- -shrext SUFFIX override the standard shared library file extension
- -static do not do any dynamic linking of uninstalled libtool libraries
- -static-libtool-libs
- do not do any dynamic linking of libtool libraries
- -version-info CURRENT[:REVISION[:AGE]]
- specify library version info [each variable defaults to 0]
- -weak LIBNAME declare that the target provides the LIBNAME interface
-
-All other options (arguments beginning with \`-') are ignored.
-
-Every other argument is treated as a filename. Files ending in \`.la' are
-treated as uninstalled libtool libraries, other files are standard or library
-object files.
-
-If the OUTPUT-FILE ends in \`.la', then a libtool library is created,
-only library objects (\`.lo' files) may be specified, and \`-rpath' is
-required, except when creating a convenience library.
-
-If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created
-using \`ar' and \`ranlib', or on Windows using \`lib'.
-
-If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file
-is created, otherwise an executable program is created."
- ;;
-
- uninstall)
- $ECHO \
-"Usage: $progname [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE...
-
-Remove libraries from an installation directory.
-
-RM is the name of the program to use to delete files associated with each FILE
-(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed
-to RM.
-
-If FILE is a libtool library, all the files associated with it are deleted.
-Otherwise, only FILE itself is deleted using RM."
- ;;
-
- *)
- func_fatal_help "invalid operation mode \`$mode'"
- ;;
- esac
-
- $ECHO
- $ECHO "Try \`$progname --help' for more information about other modes."
-
- exit $?
-}
-
-# Generated shell functions inserted here.
-
-
# Parse options once, thoroughly. This comes as soon as possible in
# the script to make things like `libtool --version' happen quickly.
{
@@ -846,11 +727,11 @@
shift
case $opt in
- --config) func_config ;;
+ --config) func_config ;;
--debug) preserve_args="$preserve_args $opt"
- func_echo "enabling shell trace mode"
- opt_debug='set -x'
+ func_echo "enabling shell trace mode"
+ opt_debug='set -x'
$opt_debug
;;
@@ -864,7 +745,7 @@
--finish) mode="finish" ;;
--mode) test "$#" -eq 0 && func_missing_arg "$opt" && break
- case $1 in
+ case $1 in
# Valid mode arguments:
clean) ;;
compile) ;;
@@ -882,19 +763,19 @@
;;
esac
- mode="$1"
+ mode="$1"
shift
;;
--preserve-dup-deps)
- opt_duplicate_deps=: ;;
+ opt_duplicate_deps=: ;;
--quiet|--silent) preserve_args="$preserve_args $opt"
- opt_silent=:
+ opt_silent=:
;;
--verbose| -v) preserve_args="$preserve_args $opt"
- opt_silent=false
+ opt_silent=false
;;
--tag) test "$#" -eq 0 && func_missing_arg "$opt" && break
@@ -917,16 +798,14 @@
-*) func_fatal_help "unrecognized option \`$opt'" ;;
*) nonopt="$opt"
- break
+ break
;;
esac
done
- # Now that we've collected a possible --mode arg, show help if necessary
- $opt_help && func_mode_help
case $host in
- *cygwin* | *mingw* | *pw32*)
+ *cygwin* | *mingw* | *pw32* | *cegcc*)
# don't eliminate duplications in $postdeps and $predeps
opt_duplicate_compiler_generated_deps=:
;;
@@ -980,7 +859,7 @@
## Main. ##
## ----------- ##
-{
+$opt_help || {
# Sanity checks first:
func_check_version_match
@@ -1014,8 +893,9 @@
# determined imposters.
func_lalib_p ()
{
- $SED -e 4q "$1" 2>/dev/null \
- | $GREP "^# Generated by .*$PACKAGE" > /dev/null 2>&1
+ test -f "$1" &&
+ $SED -e 4q "$1" 2>/dev/null \
+ | $GREP "^# Generated by .*$PACKAGE" > /dev/null 2>&1
}
# func_lalib_unsafe_p file
@@ -1028,7 +908,7 @@
func_lalib_unsafe_p ()
{
lalib_p=no
- if test -r "$1" && exec 5<&1 <"$1"; then
+ if test -f "$1" && test -r "$1" && exec 5<&0 <"$1"; then
for lalib_p_l in 1 2 3 4
do
read lalib_p_line
@@ -1036,18 +916,55 @@
\#\ Generated\ by\ *$PACKAGE* ) lalib_p=yes; break;;
esac
done
- exec 1<&5 5<&-
+ exec 0<&5 5<&-
fi
test "$lalib_p" = yes
}
+# func_ltwrapper_script_p file
+# True iff FILE is a libtool wrapper script
+# This function is only a basic sanity check; it will hardly flush out
+# determined imposters.
+func_ltwrapper_script_p ()
+{
+ func_lalib_p "$1"
+}
+
+# func_ltwrapper_executable_p file
+# True iff FILE is a libtool wrapper executable
+# This function is only a basic sanity check; it will hardly flush out
+# determined imposters.
+func_ltwrapper_executable_p ()
+{
+ func_ltwrapper_exec_suffix=
+ case $1 in
+ *.exe) ;;
+ *) func_ltwrapper_exec_suffix=.exe ;;
+ esac
+ $GREP "$magic_exe" "$1$func_ltwrapper_exec_suffix" >/dev/null 2>&1
+}
+
+# func_ltwrapper_scriptname file
+# Assumes file is an ltwrapper_executable
+# uses $file to determine the appropriate filename for a
+# temporary ltwrapper_script.
+func_ltwrapper_scriptname ()
+{
+ func_ltwrapper_scriptname_result=""
+ if func_ltwrapper_executable_p "$1"; then
+ func_dirname_and_basename "$1" "" "."
+ func_stripname '' '.exe' "$func_basename_result"
+ func_ltwrapper_scriptname_result="$func_dirname_result/$objdir/${func_stripname_result}_ltshwrapper"
+ fi
+}
+
# func_ltwrapper_p file
-# True iff FILE is a libtool wrapper script.
+# True iff FILE is a libtool wrapper script or wrapper executable
# This function is only a basic sanity check; it will hardly flush out
# determined imposters.
func_ltwrapper_p ()
{
- func_lalib_p "$1"
+ func_ltwrapper_script_p "$1" || func_ltwrapper_executable_p "$1"
}
@@ -1084,55 +1001,6 @@
}
-# func_win32_libid arg
-# return the library type of file 'arg'
-#
-# Need a lot of goo to handle *both* DLLs and import libs
-# Has to be a shell function in order to 'eat' the argument
-# that is supplied when $file_magic_command is called.
-func_win32_libid ()
-{
- $opt_debug
- win32_libid_type="unknown"
- win32_fileres=`file -L $1 2>/dev/null`
- case $win32_fileres in
- *ar\ archive\ import\ library*) # definitely import
- win32_libid_type="x86 archive import"
- ;;
- *ar\ archive*) # could be an import, or static
- if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null |
- $EGREP 'file format pe-i386(.*architecture: i386)?' >/dev/null ; then
- win32_nmres=`eval $NM -f posix -A $1 |
- $SED -n -e '
- 1,100{
- / I /{
- s,.*,import,
- p
- q
- }
- }'`
- case $win32_nmres in
- import*) win32_libid_type="x86 archive import";;
- *) win32_libid_type="x86 archive static";;
- esac
- fi
- ;;
- *DLL*)
- win32_libid_type="x86 DLL"
- ;;
- *executable*) # but shell scripts are "executable" too...
- case $win32_fileres in
- *MS\ Windows\ PE\ Intel*)
- win32_libid_type="x86 DLL"
- ;;
- esac
- ;;
- esac
- $ECHO "$win32_libid_type"
-}
-
-
-
# func_infer_tag arg
# Infer tagged configuration to use if any are available and
# if one wasn't chosen via the "--tag" command line option.
@@ -1192,359 +1060,6 @@
-# func_generate_dlsyms outputname originator pic_p
-# Extract symbols from dlprefiles and create ${outputname}S.o with
-# a dlpreopen symbol table.
-func_generate_dlsyms ()
-{
- $opt_debug
- my_outputname="$1"
- my_originator="$2"
- my_pic_p="${3-no}"
- my_prefix=`$ECHO "$my_originator" | sed 's%[^a-zA-Z0-9]%_%g'`
- my_dlsyms=
-
- if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
- if test -n "$NM" && test -n "$global_symbol_pipe"; then
- my_dlsyms="${my_outputname}S.c"
- else
- func_error "not configured to extract global symbols from dlpreopened files"
- fi
- fi
-
- if test -n "$my_dlsyms"; then
- case $my_dlsyms in
- "") ;;
- *.c)
- # Discover the nlist of each of the dlfiles.
- nlist="$output_objdir/${my_outputname}.nm"
-
- func_show_eval "$RM $nlist ${nlist}S ${nlist}T"
-
- # Parse the name list into a source file.
- func_echo "creating $output_objdir/$my_dlsyms"
-
- $opt_dry_run || $ECHO > "$output_objdir/$my_dlsyms" "\
-/* $my_dlsyms - symbol resolution table for \`$my_outputname' dlsym emulation. */
-/* Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION */
-
-#ifdef __cplusplus
-extern \"C\" {
-#endif
-
-/* External symbol declarations for the compiler. */\
-"
-
- if test "$dlself" = yes; then
- func_echo "generating symbol list for \`$output'"
-
- $opt_dry_run || echo ': @PROGRAM@ ' > "$nlist"
-
- # Add our own program objects to the symbol list.
- progfiles=`$ECHO "X$objs$old_deplibs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
- for progfile in $progfiles; do
- func_echo "extracting global C symbols from \`$progfile'"
- $opt_dry_run || eval "$NM $progfile | $global_symbol_pipe >> '$nlist'"
- done
-
- if test -n "$exclude_expsyms"; then
- $opt_dry_run || {
- eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T'
- eval '$MV "$nlist"T "$nlist"'
- }
- fi
-
- if test -n "$export_symbols_regex"; then
- $opt_dry_run || {
- eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T'
- eval '$MV "$nlist"T "$nlist"'
- }
- fi
-
- # Prepare the list of exported symbols
- if test -z "$export_symbols"; then
- export_symbols="$output_objdir/$outputname.exp"
- $opt_dry_run || {
- $RM $export_symbols
- eval "${SED} -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"'
- case $host in
- *cygwin* | *mingw* )
- eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
- eval 'cat "$export_symbols" >> "$output_objdir/$outputname.def"'
- ;;
- esac
- }
- else
- $opt_dry_run || {
- eval "${SED} -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"'
- eval '$GREP -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T'
- eval '$MV "$nlist"T "$nlist"'
- case $host in
- *cygwin | *mingw* )
- eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
- eval 'cat "$nlist" >> "$output_objdir/$outputname.def"'
- ;;
- esac
- }
- fi
- fi
-
- for dlprefile in $dlprefiles; do
- func_echo "extracting global C symbols from \`$dlprefile'"
- func_basename "$dlprefile"
- name="$func_basename_result"
- $opt_dry_run || {
- eval '$ECHO ": $name " >> "$nlist"'
- eval "$NM $dlprefile 2>/dev/null | $global_symbol_pipe >> '$nlist'"
- }
- done
-
- $opt_dry_run || {
- # Make sure we have at least an empty file.
- test -f "$nlist" || : > "$nlist"
-
- if test -n "$exclude_expsyms"; then
- $EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T
- $MV "$nlist"T "$nlist"
- fi
-
- # Try sorting and uniquifying the output.
- if $GREP -v "^: " < "$nlist" |
- if sort -k 3 </dev/null >/dev/null 2>&1; then
- sort -k 3
- else
- sort +2
- fi |
- uniq > "$nlist"S; then
- :
- else
- $GREP -v "^: " < "$nlist" > "$nlist"S
- fi
-
- if test -f "$nlist"S; then
- eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$my_dlsyms"'
- else
- $ECHO '/* NONE */' >> "$output_objdir/$my_dlsyms"
- fi
-
- $ECHO >> "$output_objdir/$my_dlsyms" "\
-
-/* The mapping between symbol names and symbols. */
-typedef struct {
- const char *name;
- void *address;
-} lt_dlsymlist;
-"
- case $host in
- *cygwin* | *mingw* )
- $ECHO >> "$output_objdir/$my_dlsyms" "\
-/* DATA imports from DLLs on WIN32 con't be const, because
- runtime relocations are performed -- see ld's documentation
- on pseudo-relocs. */"
- lt_dlsym_const= ;;
- *osf5*)
- echo >> "$output_objdir/$my_dlsyms" "\
-/* This system does not cope well with relocations in const data */"
- lt_dlsym_const= ;;
- *)
- lt_dlsym_const=const ;;
- esac
-
- $ECHO >> "$output_objdir/$my_dlsyms" "\
-extern $lt_dlsym_const lt_dlsymlist
-lt_${my_prefix}_LTX_preloaded_symbols[];
-$lt_dlsym_const lt_dlsymlist
-lt_${my_prefix}_LTX_preloaded_symbols[] =
-{\
- { \"$my_originator\", (void *) 0 },"
-
- eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$my_dlsyms"
-
- $ECHO >> "$output_objdir/$my_dlsyms" "\
- {0, (void *) 0}
-};
-
-/* This works around a problem in FreeBSD linker */
-#ifdef FREEBSD_WORKAROUND
-static const void *lt_preloaded_setup() {
- return lt_${my_prefix}_LTX_preloaded_symbols;
-}
-#endif
-
-#ifdef __cplusplus
-}
-#endif\
-"
- } # !$opt_dry_run
-
- pic_flag_for_symtable=
- case "$compile_command " in
- *" -static "*) ;;
- *)
- case $host in
- # compiling the symbol table file with pic_flag works around
- # a FreeBSD bug that causes programs to crash when -lm is
- # linked before any other PIC object. But we must not use
- # pic_flag when linking with -static. The problem exists in
- # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1.
- *-*-freebsd2*|*-*-freebsd3.0*|*-*-freebsdelf3.0*)
- pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND" ;;
- *-*-hpux*)
- pic_flag_for_symtable=" $pic_flag" ;;
- *)
- if test "X$my_pic_p" != Xno; then
- pic_flag_for_symtable=" $pic_flag"
- fi
- ;;
- esac
- ;;
- esac
- symtab_cflags=
- for arg in $LTCFLAGS; do
- case $arg in
- -pie | -fpie | -fPIE) ;;
- *) symtab_cflags="$symtab_cflags $arg" ;;
- esac
- done
-
- # Now compile the dynamic symbol file.
- func_show_eval '(cd $output_objdir && $LTCC$symtab_cflags -c$no_builtin_flag$pic_flag_for_symtable "$my_dlsyms")' 'exit $?'
-
- # Clean up the generated files.
- func_show_eval '$RM "$output_objdir/$my_dlsyms" "$nlist" "${nlist}S" "${nlist}T"'
-
- # Transform the symbol file into the correct name.
- symfileobj="$output_objdir/${my_outputname}S.$objext"
- case $host in
- *cygwin* | *mingw* )
- if test -f "$output_objdir/$my_outputname.def"; then
- compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
- finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
- else
- compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"`
- finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"`
- fi
- ;;
- *)
- compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"`
- finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"`
- ;;
- esac
- ;;
- *)
- func_fatal_error "unknown suffix for \`$my_dlsyms'"
- ;;
- esac
- else
- # We keep going just in case the user didn't refer to
- # lt_preloaded_symbols. The linker will fail if global_symbol_pipe
- # really was required.
-
- # Nullify the symbol file.
- compile_command=`$ECHO "X$compile_command" | $Xsed -e "s% @SYMFILE@%%"`
- finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"`
- fi
-}
-
-# func_extract_an_archive dir oldlib
-func_extract_an_archive ()
-{
- $opt_debug
- f_ex_an_ar_dir="$1"; shift
- f_ex_an_ar_oldlib="$1"
- func_show_eval "(cd \$f_ex_an_ar_dir && $AR x \$f_ex_an_ar_oldlib)" 'exit $?'
- if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then
- :
- else
- func_fatal_error "object name conflicts in archive: $f_ex_an_ar_dir/$f_ex_an_ar_oldlib"
- fi
-}
-
-
-# func_extract_archives gentop oldlib ...
-func_extract_archives ()
-{
- $opt_debug
- my_gentop="$1"; shift
- my_oldlibs=${1+"$@"}
- my_oldobjs=""
- my_xlib=""
- my_xabs=""
- my_xdir=""
-
- for my_xlib in $my_oldlibs; do
- # Extract the objects.
- case $my_xlib in
- [\\/]* | [A-Za-z]:[\\/]*) my_xabs="$my_xlib" ;;
- *) my_xabs=`pwd`"/$my_xlib" ;;
- esac
- func_basename "$my_xlib"
- my_xlib="$func_basename_result"
- my_xlib_u=$my_xlib
- while :; do
- case " $extracted_archives " in
- *" $my_xlib_u "*)
- extracted_serial=`expr $extracted_serial + 1`
- my_xlib_u=lt$extracted_serial-$my_xlib ;;
- *) break ;;
- esac
- done
- extracted_archives="$extracted_archives $my_xlib_u"
- my_xdir="$my_gentop/$my_xlib_u"
-
- func_mkdir_p "$my_xdir"
-
- case $host in
- *-darwin*)
- func_echo "Extracting $my_xabs"
- # Do not bother doing anything if just a dry run
- $opt_dry_run || {
- darwin_orig_dir=`pwd`
- cd $my_xdir || exit $?
- darwin_archive=$my_xabs
- darwin_curdir=`pwd`
- darwin_base_archive=`basename $darwin_archive`
- darwin_arches=`lipo -info "$darwin_archive" 2>/dev/null | $GREP Architectures 2>/dev/null || true`
- if test -n "$darwin_arches"; then
- darwin_arches=`$ECHO "$darwin_arches" | $SED -e 's/.*are://'`
- darwin_arch=
- func_echo "$darwin_base_archive has multiple architectures $darwin_arches"
- for darwin_arch in $darwin_arches ; do
- func_mkdir_p "unfat-$$/${darwin_base_archive}-${darwin_arch}"
- lipo -thin $darwin_arch -output "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" "${darwin_archive}"
- cd "unfat-$$/${darwin_base_archive}-${darwin_arch}"
- func_extract_an_archive "`pwd`" "${darwin_base_archive}"
- cd "$darwin_curdir"
- $RM "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}"
- done # $darwin_arches
- ## Okay now we've a bunch of thin objects, gotta fatten them up :)
- darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print| xargs basename | sort -u | $NL2SP`
- darwin_file=
- darwin_files=
- for darwin_file in $darwin_filelist; do
- darwin_files=`find unfat-$$ -name $darwin_file -print | $NL2SP`
- lipo -create -output "$darwin_file" $darwin_files
- done # $darwin_filelist
- $RM -rf unfat-$$
- cd "$darwin_orig_dir"
- else
- cd $darwin_orig_dir
- func_extract_an_archive "$my_xdir" "$my_xabs"
- fi # $darwin_arches
- } # !$opt_dry_run
- ;;
- *)
- func_extract_an_archive "$my_xdir" "$my_xabs"
- ;;
- esac
- my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP`
- done
-
- func_extract_archives_result="$my_oldobjs"
-}
-
-
-
# func_write_libtool_object output_name pic_name nonpic_name
# Create a libtool object file (analogous to a ".la" file),
# but don't create it if we're doing a dry run.
@@ -1578,7 +1093,7 @@
non_pic_object=$write_oldobj
EOF
- mv -f "${write_libobj}T" "${write_libobj}"
+ $MV "${write_libobj}T" "${write_libobj}"
}
}
@@ -1694,26 +1209,16 @@
# Recognize several different file suffixes.
# If the user specifies -o file.o, it is replaced with file.lo
- xform='[cCFSifmso]'
case $libobj in
- *.ada) xform=ada ;;
- *.adb) xform=adb ;;
- *.ads) xform=ads ;;
- *.asm) xform=asm ;;
- *.c++) xform=c++ ;;
- *.cc) xform=cc ;;
- *.ii) xform=ii ;;
- *.class) xform=class ;;
- *.cpp) xform=cpp ;;
- *.cxx) xform=cxx ;;
- *.[fF][09]?) xform='[fF][09].' ;;
- *.for) xform=for ;;
- *.java) xform=java ;;
- *.obj) xform=obj ;;
+ *.[cCFSifmso] | \
+ *.ada | *.adb | *.ads | *.asm | \
+ *.c++ | *.cc | *.ii | *.class | *.cpp | *.cxx | \
+ *.[fF][09]? | *.for | *.java | *.obj | *.sx)
+ func_xform "$libobj"
+ libobj=$func_xform_result
+ ;;
esac
- libobj=`$ECHO "X$libobj" | $Xsed -e "s/\.$xform$/.lo/"`
-
case $libobj in
*.lo) func_lo2o "$libobj"; obj=$func_lo2o_result ;;
*)
@@ -1752,11 +1257,10 @@
func_quote_for_eval "$libobj"
test "X$libobj" != "X$func_quote_for_eval_result" \
- && $ECHO "X$libobj" | $GREP '[]~#^*{};<>?"'"'"' &()|`$[]' \
+ && $ECHO "X$libobj" | $GREP '[]~#^*{};<>?"'"'"' &()|`$[]' \
&& func_warning "libobj name \`$libobj' may not contain shell special characters."
- func_basename "$obj"
+ func_dirname_and_basename "$obj" "/" ""
objname="$func_basename_result"
- func_dirname "$obj" "/" ""
xdir="$func_dirname_result"
lobj=${xdir}$objdir/$objname
@@ -1770,12 +1274,9 @@
removelist="$lobj $libobj ${libobj}T"
fi
- $opt_dry_run || $RM $removelist
- trap "$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE" 1 2 15
-
# On Cygwin there's no "real" PIC flag so we must build both object types
case $host_os in
- cygwin* | mingw* | pw32* | os2*)
+ cygwin* | mingw* | pw32* | os2* | cegcc*)
pic_mode=default
;;
esac
@@ -1789,8 +1290,6 @@
if test "$compiler_c_o" = no; then
output_obj=`$ECHO "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\.[^.]*$%%'`.${objext}
lockfile="$output_obj.lock"
- removelist="$removelist $output_obj $lockfile"
- trap "$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE" 1 2 15
else
output_obj=
need_locks=no
@@ -1820,17 +1319,20 @@
$opt_dry_run || $RM $removelist
exit $EXIT_FAILURE
fi
+ removelist="$removelist $output_obj"
$ECHO "$srcfile" > "$lockfile"
fi
+ $opt_dry_run || $RM $removelist
+ removelist="$removelist $lockfile"
+ trap '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' 1 2 15
+
if test -n "$fix_srcfile_path"; then
eval srcfile=\"$fix_srcfile_path\"
fi
func_quote_for_eval "$srcfile"
qsrcfile=$func_quote_for_eval_result
- $opt_dry_run || $RM "$libobj" "${libobj}T"
-
# Only build a PIC object if we are building libtool libraries.
if test "$build_libtool_libs" = yes; then
# Without this assignment, base_compile gets emptied.
@@ -1850,9 +1352,7 @@
command="$command -o $lobj"
fi
- $opt_dry_run || $RM "$lobj" "$output_obj"
-
- func_show_eval "$command" \
+ func_show_eval_locale "$command" \
'test -n "$output_obj" && $RM $removelist; exit $EXIT_FAILURE'
if test "$need_locks" = warn &&
@@ -1901,8 +1401,7 @@
# Suppress compiler output if we already did a PIC compilation.
command="$command$suppress_output"
- $opt_dry_run || $RM "$obj" "$output_obj"
- func_show_eval "$command" \
+ func_show_eval_locale "$command" \
'$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE'
if test "$need_locks" = warn &&
@@ -1937,6 +1436,7 @@
# Unlock the critical section if it was locked
if test "$need_locks" != no; then
+ removelist=$lockfile
$RM "$lockfile"
fi
}
@@ -1944,9 +1444,195 @@
exit $EXIT_SUCCESS
}
+$opt_help || {
test "$mode" = compile && func_mode_compile ${1+"$@"}
+}
+func_mode_help ()
+{
+ # We need to display help for each of the modes.
+ case $mode in
+ "")
+ # Generic help is extracted from the usage comments
+ # at the start of this file.
+ func_help
+ ;;
+ clean)
+ $ECHO \
+"Usage: $progname [OPTION]... --mode=clean RM [RM-OPTION]... FILE...
+
+Remove files from the build directory.
+
+RM is the name of the program to use to delete files associated with each FILE
+(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed
+to RM.
+
+If FILE is a libtool library, object or program, all the files associated
+with it are deleted. Otherwise, only FILE itself is deleted using RM."
+ ;;
+
+ compile)
+ $ECHO \
+"Usage: $progname [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE
+
+Compile a source file into a libtool library object.
+
+This mode accepts the following additional options:
+
+ -o OUTPUT-FILE set the output file name to OUTPUT-FILE
+ -no-suppress do not suppress compiler output for multiple passes
+ -prefer-pic try to building PIC objects only
+ -prefer-non-pic try to building non-PIC objects only
+ -shared do not build a \`.o' file suitable for static linking
+ -static only build a \`.o' file suitable for static linking
+
+COMPILE-COMMAND is a command to be used in creating a \`standard' object file
+from the given SOURCEFILE.
+
+The output file name is determined by removing the directory component from
+SOURCEFILE, then substituting the C source code suffix \`.c' with the
+library object suffix, \`.lo'."
+ ;;
+
+ execute)
+ $ECHO \
+"Usage: $progname [OPTION]... --mode=execute COMMAND [ARGS]...
+
+Automatically set library path, then run a program.
+
+This mode accepts the following additional options:
+
+ -dlopen FILE add the directory containing FILE to the library path
+
+This mode sets the library path environment variable according to \`-dlopen'
+flags.
+
+If any of the ARGS are libtool executable wrappers, then they are translated
+into their corresponding uninstalled binary, and any of their required library
+directories are added to the library path.
+
+Then, COMMAND is executed, with ARGS as arguments."
+ ;;
+
+ finish)
+ $ECHO \
+"Usage: $progname [OPTION]... --mode=finish [LIBDIR]...
+
+Complete the installation of libtool libraries.
+
+Each LIBDIR is a directory that contains libtool libraries.
+
+The commands that this mode executes may require superuser privileges. Use
+the \`--dry-run' option if you just want to see what would be executed."
+ ;;
+
+ install)
+ $ECHO \
+"Usage: $progname [OPTION]... --mode=install INSTALL-COMMAND...
+
+Install executables or libraries.
+
+INSTALL-COMMAND is the installation command. The first component should be
+either the \`install' or \`cp' program.
+
+The following components of INSTALL-COMMAND are treated specially:
+
+ -inst-prefix PREFIX-DIR Use PREFIX-DIR as a staging area for installation
+
+The rest of the components are interpreted as arguments to that command (only
+BSD-compatible install options are recognized)."
+ ;;
+
+ link)
+ $ECHO \
+"Usage: $progname [OPTION]... --mode=link LINK-COMMAND...
+
+Link object files or libraries together to form another library, or to
+create an executable program.
+
+LINK-COMMAND is a command using the C compiler that you would use to create
+a program from several object files.
+
+The following components of LINK-COMMAND are treated specially:
+
+ -all-static do not do any dynamic linking at all
+ -avoid-version do not add a version suffix if possible
+ -dlopen FILE \`-dlpreopen' FILE if it cannot be dlopened at runtime
+ -dlpreopen FILE link in FILE and add its symbols to lt_preloaded_symbols
+ -export-dynamic allow symbols from OUTPUT-FILE to be resolved with dlsym(3)
+ -export-symbols SYMFILE
+ try to export only the symbols listed in SYMFILE
+ -export-symbols-regex REGEX
+ try to export only the symbols matching REGEX
+ -LLIBDIR search LIBDIR for required installed libraries
+ -lNAME OUTPUT-FILE requires the installed library libNAME
+ -module build a library that can dlopened
+ -no-fast-install disable the fast-install mode
+ -no-install link a not-installable executable
+ -no-undefined declare that a library does not refer to external symbols
+ -o OUTPUT-FILE create OUTPUT-FILE from the specified objects
+ -objectlist FILE Use a list of object files found in FILE to specify objects
+ -precious-files-regex REGEX
+ don't remove output files matching REGEX
+ -release RELEASE specify package release information
+ -rpath LIBDIR the created library will eventually be installed in LIBDIR
+ -R[ ]LIBDIR add LIBDIR to the runtime path of programs and libraries
+ -shared only do dynamic linking of libtool libraries
+ -shrext SUFFIX override the standard shared library file extension
+ -static do not do any dynamic linking of uninstalled libtool libraries
+ -static-libtool-libs
+ do not do any dynamic linking of libtool libraries
+ -version-info CURRENT[:REVISION[:AGE]]
+ specify library version info [each variable defaults to 0]
+ -weak LIBNAME declare that the target provides the LIBNAME interface
+
+All other options (arguments beginning with \`-') are ignored.
+
+Every other argument is treated as a filename. Files ending in \`.la' are
+treated as uninstalled libtool libraries, other files are standard or library
+object files.
+
+If the OUTPUT-FILE ends in \`.la', then a libtool library is created,
+only library objects (\`.lo' files) may be specified, and \`-rpath' is
+required, except when creating a convenience library.
+
+If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created
+using \`ar' and \`ranlib', or on Windows using \`lib'.
+
+If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file
+is created, otherwise an executable program is created."
+ ;;
+
+ uninstall)
+ $ECHO \
+"Usage: $progname [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE...
+
+Remove libraries from an installation directory.
+
+RM is the name of the program to use to delete files associated with each FILE
+(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed
+to RM.
+
+If FILE is a libtool library, all the files associated with it are deleted.
+Otherwise, only FILE itself is deleted using RM."
+ ;;
+
+ *)
+ func_fatal_help "invalid operation mode \`$mode'"
+ ;;
+ esac
+
+ $ECHO
+ $ECHO "Try \`$progname --help' for more information about other modes."
+
+ exit $?
+}
+
+ # Now that we've collected a possible --mode arg, show help if necessary
+ $opt_help && func_mode_help
+
+
# func_mode_execute arg...
func_mode_execute ()
{
@@ -2029,11 +1715,15 @@
-*) ;;
*)
# Do a test to see if this is really a libtool program.
- if func_ltwrapper_p "$file"; then
+ if func_ltwrapper_script_p "$file"; then
func_source "$file"
-
# Transform arg to wrapped name.
file="$progdir/$program"
+ elif func_ltwrapper_executable_p "$file"; then
+ func_ltwrapper_scriptname "$file"
+ func_source "$func_ltwrapper_scriptname_result"
+ # Transform arg to wrapped name.
+ file="$progdir/$program"
fi
;;
esac
@@ -2049,7 +1739,7 @@
fi
# Restore saved environment variables
- for lt_var in LANG LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
+ for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
do
eval "if test \"\${save_$lt_var+set}\" = set; then
$lt_var=\$save_$lt_var; export $lt_var
@@ -2197,7 +1887,7 @@
case $arg in
-d) isdir=yes ;;
-f)
- case " $install_prog " in
+ case " $install_prog " in
*[\\\ /]cp\ *) ;;
*) prev=$arg ;;
esac
@@ -2251,9 +1941,8 @@
destdir="$dest"
destname=
else
- func_dirname "$dest" "" "."
+ func_dirname_and_basename "$dest" "" "."
destdir="$func_dirname_result"
- func_basename "$dest"
destname="$func_basename_result"
# Not a directory, so check to see that there is only one file specified.
@@ -2358,7 +2047,7 @@
'exit $?'
tstripme="$stripme"
case $host_os in
- cygwin* | mingw* | pw32*)
+ cygwin* | mingw* | pw32* | cegcc*)
case $realname in
*.dll.a)
tstripme=""
@@ -2464,15 +2153,20 @@
# Do a test to see if this is really a libtool program.
case $host in
- *cygwin*|*mingw*)
- func_stripname '' '.exe' "$file"
- wrapper=$func_stripname_result
+ *cygwin* | *mingw*)
+ if func_ltwrapper_executable_p "$file"; then
+ func_ltwrapper_scriptname "$file"
+ wrapper=$func_ltwrapper_scriptname_result
+ else
+ func_stripname '' '.exe' "$file"
+ wrapper=$func_stripname_result
+ fi
;;
*)
wrapper=$file
;;
esac
- if func_ltwrapper_p "$wrapper"; then
+ if func_ltwrapper_script_p "$wrapper"; then
notinst_deplibs=
relink_command=
@@ -2589,12 +2283,1757 @@
test "$mode" = install && func_mode_install ${1+"$@"}
+# func_generate_dlsyms outputname originator pic_p
+# Extract symbols from dlprefiles and create ${outputname}S.o with
+# a dlpreopen symbol table.
+func_generate_dlsyms ()
+{
+ $opt_debug
+ my_outputname="$1"
+ my_originator="$2"
+ my_pic_p="${3-no}"
+ my_prefix=`$ECHO "$my_originator" | sed 's%[^a-zA-Z0-9]%_%g'`
+ my_dlsyms=
+
+ if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
+ if test -n "$NM" && test -n "$global_symbol_pipe"; then
+ my_dlsyms="${my_outputname}S.c"
+ else
+ func_error "not configured to extract global symbols from dlpreopened files"
+ fi
+ fi
+
+ if test -n "$my_dlsyms"; then
+ case $my_dlsyms in
+ "") ;;
+ *.c)
+ # Discover the nlist of each of the dlfiles.
+ nlist="$output_objdir/${my_outputname}.nm"
+
+ func_show_eval "$RM $nlist ${nlist}S ${nlist}T"
+
+ # Parse the name list into a source file.
+ func_verbose "creating $output_objdir/$my_dlsyms"
+
+ $opt_dry_run || $ECHO > "$output_objdir/$my_dlsyms" "\
+/* $my_dlsyms - symbol resolution table for \`$my_outputname' dlsym emulation. */
+/* Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION */
+
+#ifdef __cplusplus
+extern \"C\" {
+#endif
+
+/* External symbol declarations for the compiler. */\
+"
+
+ if test "$dlself" = yes; then
+ func_verbose "generating symbol list for \`$output'"
+
+ $opt_dry_run || echo ': @PROGRAM@ ' > "$nlist"
+
+ # Add our own program objects to the symbol list.
+ progfiles=`$ECHO "X$objs$old_deplibs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
+ for progfile in $progfiles; do
+ func_verbose "extracting global C symbols from \`$progfile'"
+ $opt_dry_run || eval "$NM $progfile | $global_symbol_pipe >> '$nlist'"
+ done
+
+ if test -n "$exclude_expsyms"; then
+ $opt_dry_run || {
+ eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T'
+ eval '$MV "$nlist"T "$nlist"'
+ }
+ fi
+
+ if test -n "$export_symbols_regex"; then
+ $opt_dry_run || {
+ eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T'
+ eval '$MV "$nlist"T "$nlist"'
+ }
+ fi
+
+ # Prepare the list of exported symbols
+ if test -z "$export_symbols"; then
+ export_symbols="$output_objdir/$outputname.exp"
+ $opt_dry_run || {
+ $RM $export_symbols
+ eval "${SED} -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"'
+ case $host in
+ *cygwin* | *mingw* | *cegcc* )
+ eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
+ eval 'cat "$export_symbols" >> "$output_objdir/$outputname.def"'
+ ;;
+ esac
+ }
+ else
+ $opt_dry_run || {
+ eval "${SED} -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"'
+ eval '$GREP -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T'
+ eval '$MV "$nlist"T "$nlist"'
+ case $host in
+ *cygwin | *mingw* | *cegcc* )
+ eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
+ eval 'cat "$nlist" >> "$output_objdir/$outputname.def"'
+ ;;
+ esac
+ }
+ fi
+ fi
+
+ for dlprefile in $dlprefiles; do
+ func_verbose "extracting global C symbols from \`$dlprefile'"
+ func_basename "$dlprefile"
+ name="$func_basename_result"
+ $opt_dry_run || {
+ eval '$ECHO ": $name " >> "$nlist"'
+ eval "$NM $dlprefile 2>/dev/null | $global_symbol_pipe >> '$nlist'"
+ }
+ done
+
+ $opt_dry_run || {
+ # Make sure we have at least an empty file.
+ test -f "$nlist" || : > "$nlist"
+
+ if test -n "$exclude_expsyms"; then
+ $EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T
+ $MV "$nlist"T "$nlist"
+ fi
+
+ # Try sorting and uniquifying the output.
+ if $GREP -v "^: " < "$nlist" |
+ if sort -k 3 </dev/null >/dev/null 2>&1; then
+ sort -k 3
+ else
+ sort +2
+ fi |
+ uniq > "$nlist"S; then
+ :
+ else
+ $GREP -v "^: " < "$nlist" > "$nlist"S
+ fi
+
+ if test -f "$nlist"S; then
+ eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$my_dlsyms"'
+ else
+ $ECHO '/* NONE */' >> "$output_objdir/$my_dlsyms"
+ fi
+
+ $ECHO >> "$output_objdir/$my_dlsyms" "\
+
+/* The mapping between symbol names and symbols. */
+typedef struct {
+ const char *name;
+ void *address;
+} lt_dlsymlist;
+"
+ case $host in
+ *cygwin* | *mingw* | *cegcc* )
+ $ECHO >> "$output_objdir/$my_dlsyms" "\
+/* DATA imports from DLLs on WIN32 con't be const, because
+ runtime relocations are performed -- see ld's documentation
+ on pseudo-relocs. */"
+ lt_dlsym_const= ;;
+ *osf5*)
+ echo >> "$output_objdir/$my_dlsyms" "\
+/* This system does not cope well with relocations in const data */"
+ lt_dlsym_const= ;;
+ *)
+ lt_dlsym_const=const ;;
+ esac
+
+ $ECHO >> "$output_objdir/$my_dlsyms" "\
+extern $lt_dlsym_const lt_dlsymlist
+lt_${my_prefix}_LTX_preloaded_symbols[];
+$lt_dlsym_const lt_dlsymlist
+lt_${my_prefix}_LTX_preloaded_symbols[] =
+{\
+ { \"$my_originator\", (void *) 0 },"
+
+ case $need_lib_prefix in
+ no)
+ eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$my_dlsyms"
+ ;;
+ *)
+ eval "$global_symbol_to_c_name_address_lib_prefix" < "$nlist" >> "$output_objdir/$my_dlsyms"
+ ;;
+ esac
+ $ECHO >> "$output_objdir/$my_dlsyms" "\
+ {0, (void *) 0}
+};
+
+/* This works around a problem in FreeBSD linker */
+#ifdef FREEBSD_WORKAROUND
+static const void *lt_preloaded_setup() {
+ return lt_${my_prefix}_LTX_preloaded_symbols;
+}
+#endif
+
+#ifdef __cplusplus
+}
+#endif\
+"
+ } # !$opt_dry_run
+
+ pic_flag_for_symtable=
+ case "$compile_command " in
+ *" -static "*) ;;
+ *)
+ case $host in
+ # compiling the symbol table file with pic_flag works around
+ # a FreeBSD bug that causes programs to crash when -lm is
+ # linked before any other PIC object. But we must not use
+ # pic_flag when linking with -static. The problem exists in
+ # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1.
+ *-*-freebsd2*|*-*-freebsd3.0*|*-*-freebsdelf3.0*)
+ pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND" ;;
+ *-*-hpux*)
+ pic_flag_for_symtable=" $pic_flag" ;;
+ *)
+ if test "X$my_pic_p" != Xno; then
+ pic_flag_for_symtable=" $pic_flag"
+ fi
+ ;;
+ esac
+ ;;
+ esac
+ symtab_cflags=
+ for arg in $LTCFLAGS; do
+ case $arg in
+ -pie | -fpie | -fPIE) ;;
+ *) symtab_cflags="$symtab_cflags $arg" ;;
+ esac
+ done
+
+ # Now compile the dynamic symbol file.
+ func_show_eval '(cd $output_objdir && $LTCC$symtab_cflags -c$no_builtin_flag$pic_flag_for_symtable "$my_dlsyms")' 'exit $?'
+
+ # Clean up the generated files.
+ func_show_eval '$RM "$output_objdir/$my_dlsyms" "$nlist" "${nlist}S" "${nlist}T"'
+
+ # Transform the symbol file into the correct name.
+ symfileobj="$output_objdir/${my_outputname}S.$objext"
+ case $host in
+ *cygwin* | *mingw* | *cegcc* )
+ if test -f "$output_objdir/$my_outputname.def"; then
+ compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
+ finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
+ else
+ compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"`
+ finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"`
+ fi
+ ;;
+ *)
+ compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"`
+ finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"`
+ ;;
+ esac
+ ;;
+ *)
+ func_fatal_error "unknown suffix for \`$my_dlsyms'"
+ ;;
+ esac
+ else
+ # We keep going just in case the user didn't refer to
+ # lt_preloaded_symbols. The linker will fail if global_symbol_pipe
+ # really was required.
+
+ # Nullify the symbol file.
+ compile_command=`$ECHO "X$compile_command" | $Xsed -e "s% @SYMFILE@%%"`
+ finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"`
+ fi
+}
+
+# func_win32_libid arg
+# return the library type of file 'arg'
+#
+# Need a lot of goo to handle *both* DLLs and import libs
+# Has to be a shell function in order to 'eat' the argument
+# that is supplied when $file_magic_command is called.
+func_win32_libid ()
+{
+ $opt_debug
+ win32_libid_type="unknown"
+ win32_fileres=`file -L $1 2>/dev/null`
+ case $win32_fileres in
+ *ar\ archive\ import\ library*) # definitely import
+ win32_libid_type="x86 archive import"
+ ;;
+ *ar\ archive*) # could be an import, or static
+ if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null |
+ $EGREP 'file format pe-i386(.*architecture: i386)?' >/dev/null ; then
+ win32_nmres=`eval $NM -f posix -A $1 |
+ $SED -n -e '
+ 1,100{
+ / I /{
+ s,.*,import,
+ p
+ q
+ }
+ }'`
+ case $win32_nmres in
+ import*) win32_libid_type="x86 archive import";;
+ *) win32_libid_type="x86 archive static";;
+ esac
+ fi
+ ;;
+ *DLL*)
+ win32_libid_type="x86 DLL"
+ ;;
+ *executable*) # but shell scripts are "executable" too...
+ case $win32_fileres in
+ *MS\ Windows\ PE\ Intel*)
+ win32_libid_type="x86 DLL"
+ ;;
+ esac
+ ;;
+ esac
+ $ECHO "$win32_libid_type"
+}
+
+
+
+# func_extract_an_archive dir oldlib
+func_extract_an_archive ()
+{
+ $opt_debug
+ f_ex_an_ar_dir="$1"; shift
+ f_ex_an_ar_oldlib="$1"
+ func_show_eval "(cd \$f_ex_an_ar_dir && $AR x \"\$f_ex_an_ar_oldlib\")" 'exit $?'
+ if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then
+ :
+ else
+ func_fatal_error "object name conflicts in archive: $f_ex_an_ar_dir/$f_ex_an_ar_oldlib"
+ fi
+}
+
+
+# func_extract_archives gentop oldlib ...
+func_extract_archives ()
+{
+ $opt_debug
+ my_gentop="$1"; shift
+ my_oldlibs=${1+"$@"}
+ my_oldobjs=""
+ my_xlib=""
+ my_xabs=""
+ my_xdir=""
+
+ for my_xlib in $my_oldlibs; do
+ # Extract the objects.
+ case $my_xlib in
+ [\\/]* | [A-Za-z]:[\\/]*) my_xabs="$my_xlib" ;;
+ *) my_xabs=`pwd`"/$my_xlib" ;;
+ esac
+ func_basename "$my_xlib"
+ my_xlib="$func_basename_result"
+ my_xlib_u=$my_xlib
+ while :; do
+ case " $extracted_archives " in
+ *" $my_xlib_u "*)
+ func_arith $extracted_serial + 1
+ extracted_serial=$func_arith_result
+ my_xlib_u=lt$extracted_serial-$my_xlib ;;
+ *) break ;;
+ esac
+ done
+ extracted_archives="$extracted_archives $my_xlib_u"
+ my_xdir="$my_gentop/$my_xlib_u"
+
+ func_mkdir_p "$my_xdir"
+
+ case $host in
+ *-darwin*)
+ func_verbose "Extracting $my_xabs"
+ # Do not bother doing anything if just a dry run
+ $opt_dry_run || {
+ darwin_orig_dir=`pwd`
+ cd $my_xdir || exit $?
+ darwin_archive=$my_xabs
+ darwin_curdir=`pwd`
+ darwin_base_archive=`basename "$darwin_archive"`
+ darwin_arches=`$LIPO -info "$darwin_archive" 2>/dev/null | $GREP Architectures 2>/dev/null || true`
+ if test -n "$darwin_arches"; then
+ darwin_arches=`$ECHO "$darwin_arches" | $SED -e 's/.*are://'`
+ darwin_arch=
+ func_verbose "$darwin_base_archive has multiple architectures $darwin_arches"
+ for darwin_arch in $darwin_arches ; do
+ func_mkdir_p "unfat-$$/${darwin_base_archive}-${darwin_arch}"
+ $LIPO -thin $darwin_arch -output "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" "${darwin_archive}"
+ cd "unfat-$$/${darwin_base_archive}-${darwin_arch}"
+ func_extract_an_archive "`pwd`" "${darwin_base_archive}"
+ cd "$darwin_curdir"
+ $RM "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}"
+ done # $darwin_arches
+ ## Okay now we've a bunch of thin objects, gotta fatten them up :)
+ darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print | $SED -e "$basename" | sort -u`
+ darwin_file=
+ darwin_files=
+ for darwin_file in $darwin_filelist; do
+ darwin_files=`find unfat-$$ -name $darwin_file -print | $NL2SP`
+ $LIPO -create -output "$darwin_file" $darwin_files
+ done # $darwin_filelist
+ $RM -rf unfat-$$
+ cd "$darwin_orig_dir"
+ else
+ cd $darwin_orig_dir
+ func_extract_an_archive "$my_xdir" "$my_xabs"
+ fi # $darwin_arches
+ } # !$opt_dry_run
+ ;;
+ *)
+ func_extract_an_archive "$my_xdir" "$my_xabs"
+ ;;
+ esac
+ my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP`
+ done
+
+ func_extract_archives_result="$my_oldobjs"
+}
+
+
+
+# func_emit_wrapper_part1 [arg=no]
+#
+# Emit the first part of a libtool wrapper script on stdout.
+# For more information, see the description associated with
+# func_emit_wrapper(), below.
+func_emit_wrapper_part1 ()
+{
+ func_emit_wrapper_part1_arg1=no
+ if test -n "$1" ; then
+ func_emit_wrapper_part1_arg1=$1
+ fi
+
+ $ECHO "\
+#! $SHELL
+
+# $output - temporary wrapper script for $objdir/$outputname
+# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
+#
+# The $output program cannot be directly executed until all the libtool
+# libraries that it depends on are installed.
+#
+# This wrapper script should never be moved out of the build directory.
+# If it is, it will not operate correctly.
+
+# Sed substitution that helps us do robust quoting. It backslashifies
+# metacharacters that are still active within double-quoted strings.
+Xsed='${SED} -e 1s/^X//'
+sed_quote_subst='$sed_quote_subst'
+
+# Be Bourne compatible
+if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then
+ emulate sh
+ NULLCMD=:
+ # Zsh 3.x and 4.x performs word splitting on \${1+\"\$@\"}, which
+ # is contrary to our usage. Disable this feature.
+ alias -g '\${1+\"\$@\"}'='\"\$@\"'
+ setopt NO_GLOB_SUBST
+else
+ case \`(set -o) 2>/dev/null\` in *posix*) set -o posix;; esac
+fi
+BIN_SH=xpg4; export BIN_SH # for Tru64
+DUALCASE=1; export DUALCASE # for MKS sh
+
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+relink_command=\"$relink_command\"
+
+# This environment variable determines our operation mode.
+if test \"\$libtool_install_magic\" = \"$magic\"; then
+ # install mode needs the following variables:
+ generated_by_libtool_version='$macro_version'
+ notinst_deplibs='$notinst_deplibs'
+else
+ # When we are sourced in execute mode, \$file and \$ECHO are already set.
+ if test \"\$libtool_execute_magic\" != \"$magic\"; then
+ ECHO=\"$qecho\"
+ file=\"\$0\"
+ # Make sure echo works.
+ if test \"X\$1\" = X--no-reexec; then
+ # Discard the --no-reexec flag, and continue.
+ shift
+ elif test \"X\`{ \$ECHO '\t'; } 2>/dev/null\`\" = 'X\t'; then
+ # Yippee, \$ECHO works!
+ :
+ else
+ # Restart under the correct shell, and then maybe \$ECHO will work.
+ exec $SHELL \"\$0\" --no-reexec \${1+\"\$@\"}
+ fi
+ fi\
+"
+ $ECHO "\
+
+ # Find the directory that this script lives in.
+ thisdir=\`\$ECHO \"X\$file\" | \$Xsed -e 's%/[^/]*$%%'\`
+ test \"x\$thisdir\" = \"x\$file\" && thisdir=.
+
+ # Follow symbolic links until we get to the real thisdir.
+ file=\`ls -ld \"\$file\" | ${SED} -n 's/.*-> //p'\`
+ while test -n \"\$file\"; do
+ destdir=\`\$ECHO \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\`
+
+ # If there was a directory component, then change thisdir.
+ if test \"x\$destdir\" != \"x\$file\"; then
+ case \"\$destdir\" in
+ [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;;
+ *) thisdir=\"\$thisdir/\$destdir\" ;;
+ esac
+ fi
+
+ file=\`\$ECHO \"X\$file\" | \$Xsed -e 's%^.*/%%'\`
+ file=\`ls -ld \"\$thisdir/\$file\" | ${SED} -n 's/.*-> //p'\`
+ done
+"
+}
+# end: func_emit_wrapper_part1
+
+# func_emit_wrapper_part2 [arg=no]
+#
+# Emit the second part of a libtool wrapper script on stdout.
+# For more information, see the description associated with
+# func_emit_wrapper(), below.
+func_emit_wrapper_part2 ()
+{
+ func_emit_wrapper_part2_arg1=no
+ if test -n "$1" ; then
+ func_emit_wrapper_part2_arg1=$1
+ fi
+
+ $ECHO "\
+
+ # Usually 'no', except on cygwin/mingw when embedded into
+ # the cwrapper.
+ WRAPPER_SCRIPT_BELONGS_IN_OBJDIR=$func_emit_wrapper_part2_arg1
+ if test \"\$WRAPPER_SCRIPT_BELONGS_IN_OBJDIR\" = \"yes\"; then
+ # special case for '.'
+ if test \"\$thisdir\" = \".\"; then
+ thisdir=\`pwd\`
+ fi
+ # remove .libs from thisdir
+ case \"\$thisdir\" in
+ *[\\\\/]$objdir ) thisdir=\`\$ECHO \"X\$thisdir\" | \$Xsed -e 's%[\\\\/][^\\\\/]*$%%'\` ;;
+ $objdir ) thisdir=. ;;
+ esac
+ fi
+
+ # Try to get the absolute directory name.
+ absdir=\`cd \"\$thisdir\" && pwd\`
+ test -n \"\$absdir\" && thisdir=\"\$absdir\"
+"
+
+ if test "$fast_install" = yes; then
+ $ECHO "\
+ program=lt-'$outputname'$exeext
+ progdir=\"\$thisdir/$objdir\"
+
+ if test ! -f \"\$progdir/\$program\" ||
+ { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\
+ test \"X\$file\" != \"X\$progdir/\$program\"; }; then
+
+ file=\"\$\$-\$program\"
+
+ if test ! -d \"\$progdir\"; then
+ $MKDIR \"\$progdir\"
+ else
+ $RM \"\$progdir/\$file\"
+ fi"
+
+ $ECHO "\
+
+ # relink executable if necessary
+ if test -n \"\$relink_command\"; then
+ if relink_command_output=\`eval \$relink_command 2>&1\`; then :
+ else
+ $ECHO \"\$relink_command_output\" >&2
+ $RM \"\$progdir/\$file\"
+ exit 1
+ fi
+ fi
+
+ $MV \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null ||
+ { $RM \"\$progdir/\$program\";
+ $MV \"\$progdir/\$file\" \"\$progdir/\$program\"; }
+ $RM \"\$progdir/\$file\"
+ fi"
+ else
+ $ECHO "\
+ program='$outputname'
+ progdir=\"\$thisdir/$objdir\"
+"
+ fi
+
+ $ECHO "\
+
+ if test -f \"\$progdir/\$program\"; then"
+
+ # Export our shlibpath_var if we have one.
+ if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
+ $ECHO "\
+ # Add our own library path to $shlibpath_var
+ $shlibpath_var=\"$temp_rpath\$$shlibpath_var\"
+
+ # Some systems cannot cope with colon-terminated $shlibpath_var
+ # The second colon is a workaround for a bug in BeOS R4 sed
+ $shlibpath_var=\`\$ECHO \"X\$$shlibpath_var\" | \$Xsed -e 's/::*\$//'\`
+
+ export $shlibpath_var
+"
+ fi
+
+ # fixup the dll searchpath if we need to.
+ if test -n "$dllsearchpath"; then
+ $ECHO "\
+ # Add the dll search path components to the executable PATH
+ PATH=$dllsearchpath:\$PATH
+"
+ fi
+
+ $ECHO "\
+ if test \"\$libtool_execute_magic\" != \"$magic\"; then
+ # Run the actual program with our arguments.
+"
+ case $host in
+ # Backslashes separate directories on plain windows
+ *-*-mingw | *-*-os2* | *-cegcc*)
+ $ECHO "\
+ exec \"\$progdir\\\\\$program\" \${1+\"\$@\"}
+"
+ ;;
+
+ *)
+ $ECHO "\
+ exec \"\$progdir/\$program\" \${1+\"\$@\"}
+"
+ ;;
+ esac
+ $ECHO "\
+ \$ECHO \"\$0: cannot exec \$program \$*\" 1>&2
+ exit 1
+ fi
+ else
+ # The program doesn't exist.
+ \$ECHO \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2
+ \$ECHO \"This script is just a wrapper for \$program.\" 1>&2
+ $ECHO \"See the $PACKAGE documentation for more information.\" 1>&2
+ exit 1
+ fi
+fi\
+"
+}
+# end: func_emit_wrapper_part2
+
+
+# func_emit_wrapper [arg=no]
+#
+# Emit a libtool wrapper script on stdout.
+# Don't directly open a file because we may want to
+# incorporate the script contents within a cygwin/mingw
+# wrapper executable. Must ONLY be called from within
+# func_mode_link because it depends on a number of variables
+# set therein.
+#
+# ARG is the value that the WRAPPER_SCRIPT_BELONGS_IN_OBJDIR
+# variable will take. If 'yes', then the emitted script
+# will assume that the directory in which it is stored is
+# the $objdir directory. This is a cygwin/mingw-specific
+# behavior.
+func_emit_wrapper ()
+{
+ func_emit_wrapper_arg1=no
+ if test -n "$1" ; then
+ func_emit_wrapper_arg1=$1
+ fi
+
+ # split this up so that func_emit_cwrapperexe_src
+ # can call each part independently.
+ func_emit_wrapper_part1 "${func_emit_wrapper_arg1}"
+ func_emit_wrapper_part2 "${func_emit_wrapper_arg1}"
+}
+
+
+# func_to_host_path arg
+#
+# Convert paths to host format when used with build tools.
+# Intended for use with "native" mingw (where libtool itself
+# is running under the msys shell), or in the following cross-
+# build environments:
+# $build $host
+# mingw (msys) mingw [e.g. native]
+# cygwin mingw
+# *nix + wine mingw
+# where wine is equipped with the `winepath' executable.
+# In the native mingw case, the (msys) shell automatically
+# converts paths for any non-msys applications it launches,
+# but that facility isn't available from inside the cwrapper.
+# Similar accommodations are necessary for $host mingw and
+# $build cygwin. Calling this function does no harm for other
+# $host/$build combinations not listed above.
+#
+# ARG is the path (on $build) that should be converted to
+# the proper representation for $host. The result is stored
+# in $func_to_host_path_result.
+func_to_host_path ()
+{
+ func_to_host_path_result="$1"
+ if test -n "$1" ; then
+ case $host in
+ *mingw* )
+ lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g'
+ case $build in
+ *mingw* ) # actually, msys
+ # awkward: cmd appends spaces to result
+ lt_sed_strip_trailing_spaces="s/[ ]*\$//"
+ func_to_host_path_tmp1=`( cmd //c echo "$1" |\
+ $SED -e "$lt_sed_strip_trailing_spaces" ) 2>/dev/null || echo ""`
+ func_to_host_path_result=`echo "$func_to_host_path_tmp1" |\
+ $SED -e "$lt_sed_naive_backslashify"`
+ ;;
+ *cygwin* )
+ func_to_host_path_tmp1=`cygpath -w "$1"`
+ func_to_host_path_result=`echo "$func_to_host_path_tmp1" |\
+ $SED -e "$lt_sed_naive_backslashify"`
+ ;;
+ * )
+ # Unfortunately, winepath does not exit with a non-zero
+ # error code, so we are forced to check the contents of
+ # stdout. On the other hand, if the command is not
+ # found, the shell will set an exit code of 127 and print
+ # *an error message* to stdout. So we must check for both
+ # error code of zero AND non-empty stdout, which explains
+ # the odd construction:
+ func_to_host_path_tmp1=`winepath -w "$1" 2>/dev/null`
+ if test "$?" -eq 0 && test -n "${func_to_host_path_tmp1}"; then
+ func_to_host_path_result=`echo "$func_to_host_path_tmp1" |\
+ $SED -e "$lt_sed_naive_backslashify"`
+ else
+ # Allow warning below.
+ func_to_host_path_result=""
+ fi
+ ;;
+ esac
+ if test -z "$func_to_host_path_result" ; then
+ func_error "Could not determine host path corresponding to"
+ func_error " '$1'"
+ func_error "Continuing, but uninstalled executables may not work."
+ # Fallback:
+ func_to_host_path_result="$1"
+ fi
+ ;;
+ esac
+ fi
+}
+# end: func_to_host_path
+
+# func_to_host_pathlist arg
+#
+# Convert pathlists to host format when used with build tools.
+# See func_to_host_path(), above. This function supports the
+# following $build/$host combinations (but does no harm for
+# combinations not listed here):
+# $build $host
+# mingw (msys) mingw [e.g. native]
+# cygwin mingw
+# *nix + wine mingw
+#
+# Path separators are also converted from $build format to
+# $host format. If ARG begins or ends with a path separator
+# character, it is preserved (but converted to $host format)
+# on output.
+#
+# ARG is a pathlist (on $build) that should be converted to
+# the proper representation on $host. The result is stored
+# in $func_to_host_pathlist_result.
+func_to_host_pathlist ()
+{
+ func_to_host_pathlist_result="$1"
+ if test -n "$1" ; then
+ case $host in
+ *mingw* )
+ lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g'
+ # Remove leading and trailing path separator characters from
+ # ARG. msys behavior is inconsistent here, cygpath turns them
+ # into '.;' and ';.', and winepath ignores them completely.
+ func_to_host_pathlist_tmp2="$1"
+ # Once set for this call, this variable should not be
+ # reassigned. It is used in tha fallback case.
+ func_to_host_pathlist_tmp1=`echo "$func_to_host_pathlist_tmp2" |\
+ $SED -e 's|^:*||' -e 's|:*$||'`
+ case $build in
+ *mingw* ) # Actually, msys.
+ # Awkward: cmd appends spaces to result.
+ lt_sed_strip_trailing_spaces="s/[ ]*\$//"
+ func_to_host_pathlist_tmp2=`( cmd //c echo "$func_to_host_pathlist_tmp1" |\
+ $SED -e "$lt_sed_strip_trailing_spaces" ) 2>/dev/null || echo ""`
+ func_to_host_pathlist_result=`echo "$func_to_host_pathlist_tmp2" |\
+ $SED -e "$lt_sed_naive_backslashify"`
+ ;;
+ *cygwin* )
+ func_to_host_pathlist_tmp2=`cygpath -w -p "$func_to_host_pathlist_tmp1"`
+ func_to_host_pathlist_result=`echo "$func_to_host_pathlist_tmp2" |\
+ $SED -e "$lt_sed_naive_backslashify"`
+ ;;
+ * )
+ # unfortunately, winepath doesn't convert pathlists
+ func_to_host_pathlist_result=""
+ func_to_host_pathlist_oldIFS=$IFS
+ IFS=:
+ for func_to_host_pathlist_f in $func_to_host_pathlist_tmp1 ; do
+ IFS=$func_to_host_pathlist_oldIFS
+ if test -n "$func_to_host_pathlist_f" ; then
+ func_to_host_path "$func_to_host_pathlist_f"
+ if test -n "$func_to_host_path_result" ; then
+ if test -z "$func_to_host_pathlist_result" ; then
+ func_to_host_pathlist_result="$func_to_host_path_result"
+ else
+ func_to_host_pathlist_result="$func_to_host_pathlist_result;$func_to_host_path_result"
+ fi
+ fi
+ fi
+ IFS=:
+ done
+ IFS=$func_to_host_pathlist_oldIFS
+ ;;
+ esac
+ if test -z "$func_to_host_pathlist_result" ; then
+ func_error "Could not determine the host path(s) corresponding to"
+ func_error " '$1'"
+ func_error "Continuing, but uninstalled executables may not work."
+ # Fallback. This may break if $1 contains DOS-style drive
+ # specifications. The fix is not to complicate the expression
+ # below, but for the user to provide a working wine installation
+ # with winepath so that path translation in the cross-to-mingw
+ # case works properly.
+ lt_replace_pathsep_nix_to_dos="s|:|;|g"
+ func_to_host_pathlist_result=`echo "$func_to_host_pathlist_tmp1" |\
+ $SED -e "$lt_replace_pathsep_nix_to_dos"`
+ fi
+ # Now, add the leading and trailing path separators back
+ case "$1" in
+ :* ) func_to_host_pathlist_result=";$func_to_host_pathlist_result"
+ ;;
+ esac
+ case "$1" in
+ *: ) func_to_host_pathlist_result="$func_to_host_pathlist_result;"
+ ;;
+ esac
+ ;;
+ esac
+ fi
+}
+# end: func_to_host_pathlist
+
+# func_emit_cwrapperexe_src
+# emit the source code for a wrapper executable on stdout
+# Must ONLY be called from within func_mode_link because
+# it depends on a number of variable set therein.
+func_emit_cwrapperexe_src ()
+{
+ cat <<EOF
+
+/* $cwrappersource - temporary wrapper executable for $objdir/$outputname
+ Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
+
+ The $output program cannot be directly executed until all the libtool
+ libraries that it depends on are installed.
+
+ This wrapper executable should never be moved out of the build directory.
+ If it is, it will not operate correctly.
+
+ Currently, it simply execs the wrapper *script* "$SHELL $output",
+ but could eventually absorb all of the scripts functionality and
+ exec $objdir/$outputname directly.
+*/
+EOF
+ cat <<"EOF"
+#include <stdio.h>
+#include <stdlib.h>
+#ifdef _MSC_VER
+# include <direct.h>
+# include <process.h>
+# include <io.h>
+# define setmode _setmode
+#else
+# include <unistd.h>
+# include <stdint.h>
+# ifdef __CYGWIN__
+# include <io.h>
+# define HAVE_SETENV
+# ifdef __STRICT_ANSI__
+char *realpath (const char *, char *);
+int putenv (char *);
+int setenv (const char *, const char *, int);
+# endif
+# endif
+#endif
+#include <malloc.h>
+#include <stdarg.h>
+#include <assert.h>
+#include <string.h>
+#include <ctype.h>
+#include <errno.h>
+#include <fcntl.h>
+#include <sys/stat.h>
+
+#if defined(PATH_MAX)
+# define LT_PATHMAX PATH_MAX
+#elif defined(MAXPATHLEN)
+# define LT_PATHMAX MAXPATHLEN
+#else
+# define LT_PATHMAX 1024
+#endif
+
+#ifndef S_IXOTH
+# define S_IXOTH 0
+#endif
+#ifndef S_IXGRP
+# define S_IXGRP 0
+#endif
+
+#ifdef _MSC_VER
+# define S_IXUSR _S_IEXEC
+# define stat _stat
+# ifndef _INTPTR_T_DEFINED
+# define intptr_t int
+# endif
+#endif
+
+#ifndef DIR_SEPARATOR
+# define DIR_SEPARATOR '/'
+# define PATH_SEPARATOR ':'
+#endif
+
+#if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \
+ defined (__OS2__)
+# define HAVE_DOS_BASED_FILE_SYSTEM
+# define FOPEN_WB "wb"
+# ifndef DIR_SEPARATOR_2
+# define DIR_SEPARATOR_2 '\\'
+# endif
+# ifndef PATH_SEPARATOR_2
+# define PATH_SEPARATOR_2 ';'
+# endif
+#endif
+
+#ifndef DIR_SEPARATOR_2
+# define IS_DIR_SEPARATOR(ch) ((ch) == DIR_SEPARATOR)
+#else /* DIR_SEPARATOR_2 */
+# define IS_DIR_SEPARATOR(ch) \
+ (((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2))
+#endif /* DIR_SEPARATOR_2 */
+
+#ifndef PATH_SEPARATOR_2
+# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR)
+#else /* PATH_SEPARATOR_2 */
+# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2)
+#endif /* PATH_SEPARATOR_2 */
+
+#ifdef __CYGWIN__
+# define FOPEN_WB "wb"
+#endif
+
+#ifndef FOPEN_WB
+# define FOPEN_WB "w"
+#endif
+#ifndef _O_BINARY
+# define _O_BINARY 0
+#endif
+
+#define XMALLOC(type, num) ((type *) xmalloc ((num) * sizeof(type)))
+#define XFREE(stale) do { \
+ if (stale) { free ((void *) stale); stale = 0; } \
+} while (0)
+
+#undef LTWRAPPER_DEBUGPRINTF
+#if defined DEBUGWRAPPER
+# define LTWRAPPER_DEBUGPRINTF(args) ltwrapper_debugprintf args
+static void
+ltwrapper_debugprintf (const char *fmt, ...)
+{
+ va_list args;
+ va_start (args, fmt);
+ (void) vfprintf (stderr, fmt, args);
+ va_end (args);
+}
+#else
+# define LTWRAPPER_DEBUGPRINTF(args)
+#endif
+
+const char *program_name = NULL;
+
+void *xmalloc (size_t num);
+char *xstrdup (const char *string);
+const char *base_name (const char *name);
+char *find_executable (const char *wrapper);
+char *chase_symlinks (const char *pathspec);
+int make_executable (const char *path);
+int check_executable (const char *path);
+char *strendzap (char *str, const char *pat);
+void lt_fatal (const char *message, ...);
+void lt_setenv (const char *name, const char *value);
+char *lt_extend_str (const char *orig_value, const char *add, int to_end);
+void lt_opt_process_env_set (const char *arg);
+void lt_opt_process_env_prepend (const char *arg);
+void lt_opt_process_env_append (const char *arg);
+int lt_split_name_value (const char *arg, char** name, char** value);
+void lt_update_exe_path (const char *name, const char *value);
+void lt_update_lib_path (const char *name, const char *value);
+
+static const char *script_text_part1 =
+EOF
+
+ func_emit_wrapper_part1 yes |
+ $SED -e 's/\([\\"]\)/\\\1/g' \
+ -e 's/^/ "/' -e 's/$/\\n"/'
+ echo ";"
+ cat <<EOF
+
+static const char *script_text_part2 =
+EOF
+ func_emit_wrapper_part2 yes |
+ $SED -e 's/\([\\"]\)/\\\1/g' \
+ -e 's/^/ "/' -e 's/$/\\n"/'
+ echo ";"
+
+ cat <<EOF
+const char * MAGIC_EXE = "$magic_exe";
+const char * LIB_PATH_VARNAME = "$shlibpath_var";
+EOF
+
+ if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
+ func_to_host_pathlist "$temp_rpath"
+ cat <<EOF
+const char * LIB_PATH_VALUE = "$func_to_host_pathlist_result";
+EOF
+ else
+ cat <<"EOF"
+const char * LIB_PATH_VALUE = "";
+EOF
+ fi
+
+ if test -n "$dllsearchpath"; then
+ func_to_host_pathlist "$dllsearchpath:"
+ cat <<EOF
+const char * EXE_PATH_VARNAME = "PATH";
+const char * EXE_PATH_VALUE = "$func_to_host_pathlist_result";
+EOF
+ else
+ cat <<"EOF"
+const char * EXE_PATH_VARNAME = "";
+const char * EXE_PATH_VALUE = "";
+EOF
+ fi
+
+ if test "$fast_install" = yes; then
+ cat <<EOF
+const char * TARGET_PROGRAM_NAME = "lt-$outputname"; /* hopefully, no .exe */
+EOF
+ else
+ cat <<EOF
+const char * TARGET_PROGRAM_NAME = "$outputname"; /* hopefully, no .exe */
+EOF
+ fi
+
+
+ cat <<"EOF"
+
+#define LTWRAPPER_OPTION_PREFIX "--lt-"
+#define LTWRAPPER_OPTION_PREFIX_LENGTH 5
+
+static const size_t opt_prefix_len = LTWRAPPER_OPTION_PREFIX_LENGTH;
+static const char *ltwrapper_option_prefix = LTWRAPPER_OPTION_PREFIX;
+
+static const char *dumpscript_opt = LTWRAPPER_OPTION_PREFIX "dump-script";
+
+static const size_t env_set_opt_len = LTWRAPPER_OPTION_PREFIX_LENGTH + 7;
+static const char *env_set_opt = LTWRAPPER_OPTION_PREFIX "env-set";
+ /* argument is putenv-style "foo=bar", value of foo is set to bar */
+
+static const size_t env_prepend_opt_len = LTWRAPPER_OPTION_PREFIX_LENGTH + 11;
+static const char *env_prepend_opt = LTWRAPPER_OPTION_PREFIX "env-prepend";
+ /* argument is putenv-style "foo=bar", new value of foo is bar${foo} */
+
+static const size_t env_append_opt_len = LTWRAPPER_OPTION_PREFIX_LENGTH + 10;
+static const char *env_append_opt = LTWRAPPER_OPTION_PREFIX "env-append";
+ /* argument is putenv-style "foo=bar", new value of foo is ${foo}bar */
+
+int
+main (int argc, char *argv[])
+{
+ char **newargz;
+ int newargc;
+ char *tmp_pathspec;
+ char *actual_cwrapper_path;
+ char *actual_cwrapper_name;
+ char *target_name;
+ char *lt_argv_zero;
+ intptr_t rval = 127;
+
+ int i;
+
+ program_name = (char *) xstrdup (base_name (argv[0]));
+ LTWRAPPER_DEBUGPRINTF (("(main) argv[0] : %s\n", argv[0]));
+ LTWRAPPER_DEBUGPRINTF (("(main) program_name : %s\n", program_name));
+
+ /* very simple arg parsing; don't want to rely on getopt */
+ for (i = 1; i < argc; i++)
+ {
+ if (strcmp (argv[i], dumpscript_opt) == 0)
+ {
+EOF
+ case "$host" in
+ *mingw* | *cygwin* )
+ # make stdout use "unix" line endings
+ echo " setmode(1,_O_BINARY);"
+ ;;
+ esac
+
+ cat <<"EOF"
+ printf ("%s", script_text_part1);
+ printf ("%s", script_text_part2);
+ return 0;
+ }
+ }
+
+ newargz = XMALLOC (char *, argc + 1);
+ tmp_pathspec = find_executable (argv[0]);
+ if (tmp_pathspec == NULL)
+ lt_fatal ("Couldn't find %s", argv[0]);
+ LTWRAPPER_DEBUGPRINTF (("(main) found exe (before symlink chase) at : %s\n",
+ tmp_pathspec));
+
+ actual_cwrapper_path = chase_symlinks (tmp_pathspec);
+ LTWRAPPER_DEBUGPRINTF (("(main) found exe (after symlink chase) at : %s\n",
+ actual_cwrapper_path));
+ XFREE (tmp_pathspec);
+
+ actual_cwrapper_name = xstrdup( base_name (actual_cwrapper_path));
+ strendzap (actual_cwrapper_path, actual_cwrapper_name);
+
+ /* wrapper name transforms */
+ strendzap (actual_cwrapper_name, ".exe");
+ tmp_pathspec = lt_extend_str (actual_cwrapper_name, ".exe", 1);
+ XFREE (actual_cwrapper_name);
+ actual_cwrapper_name = tmp_pathspec;
+ tmp_pathspec = 0;
+
+ /* target_name transforms -- use actual target program name; might have lt- prefix */
+ target_name = xstrdup (base_name (TARGET_PROGRAM_NAME));
+ strendzap (target_name, ".exe");
+ tmp_pathspec = lt_extend_str (target_name, ".exe", 1);
+ XFREE (target_name);
+ target_name = tmp_pathspec;
+ tmp_pathspec = 0;
+
+ LTWRAPPER_DEBUGPRINTF (("(main) libtool target name: %s\n",
+ target_name));
+EOF
+
+ cat <<EOF
+ newargz[0] =
+ XMALLOC (char, (strlen (actual_cwrapper_path) +
+ strlen ("$objdir") + 1 + strlen (actual_cwrapper_name) + 1));
+ strcpy (newargz[0], actual_cwrapper_path);
+ strcat (newargz[0], "$objdir");
+ strcat (newargz[0], "/");
+EOF
+
+ cat <<"EOF"
+ /* stop here, and copy so we don't have to do this twice */
+ tmp_pathspec = xstrdup (newargz[0]);
+
+ /* do NOT want the lt- prefix here, so use actual_cwrapper_name */
+ strcat (newargz[0], actual_cwrapper_name);
+
+ /* DO want the lt- prefix here if it exists, so use target_name */
+ lt_argv_zero = lt_extend_str (tmp_pathspec, target_name, 1);
+ XFREE (tmp_pathspec);
+ tmp_pathspec = NULL;
+EOF
+
+ case $host_os in
+ mingw*)
+ cat <<"EOF"
+ {
+ char* p;
+ while ((p = strchr (newargz[0], '\\')) != NULL)
+ {
+ *p = '/';
+ }
+ while ((p = strchr (lt_argv_zero, '\\')) != NULL)
+ {
+ *p = '/';
+ }
+ }
+EOF
+ ;;
+ esac
+
+ cat <<"EOF"
+ XFREE (target_name);
+ XFREE (actual_cwrapper_path);
+ XFREE (actual_cwrapper_name);
+
+ lt_setenv ("BIN_SH", "xpg4"); /* for Tru64 */
+ lt_setenv ("DUALCASE", "1"); /* for MSK sh */
+ lt_update_lib_path (LIB_PATH_VARNAME, LIB_PATH_VALUE);
+ lt_update_exe_path (EXE_PATH_VARNAME, EXE_PATH_VALUE);
+
+ newargc=0;
+ for (i = 1; i < argc; i++)
+ {
+ if (strncmp (argv[i], env_set_opt, env_set_opt_len) == 0)
+ {
+ if (argv[i][env_set_opt_len] == '=')
+ {
+ const char *p = argv[i] + env_set_opt_len + 1;
+ lt_opt_process_env_set (p);
+ }
+ else if (argv[i][env_set_opt_len] == '\0' && i + 1 < argc)
+ {
+ lt_opt_process_env_set (argv[++i]); /* don't copy */
+ }
+ else
+ lt_fatal ("%s missing required argument", env_set_opt);
+ continue;
+ }
+ if (strncmp (argv[i], env_prepend_opt, env_prepend_opt_len) == 0)
+ {
+ if (argv[i][env_prepend_opt_len] == '=')
+ {
+ const char *p = argv[i] + env_prepend_opt_len + 1;
+ lt_opt_process_env_prepend (p);
+ }
+ else if (argv[i][env_prepend_opt_len] == '\0' && i + 1 < argc)
+ {
+ lt_opt_process_env_prepend (argv[++i]); /* don't copy */
+ }
+ else
+ lt_fatal ("%s missing required argument", env_prepend_opt);
+ continue;
+ }
+ if (strncmp (argv[i], env_append_opt, env_append_opt_len) == 0)
+ {
+ if (argv[i][env_append_opt_len] == '=')
+ {
+ const char *p = argv[i] + env_append_opt_len + 1;
+ lt_opt_process_env_append (p);
+ }
+ else if (argv[i][env_append_opt_len] == '\0' && i + 1 < argc)
+ {
+ lt_opt_process_env_append (argv[++i]); /* don't copy */
+ }
+ else
+ lt_fatal ("%s missing required argument", env_append_opt);
+ continue;
+ }
+ if (strncmp (argv[i], ltwrapper_option_prefix, opt_prefix_len) == 0)
+ {
+ /* however, if there is an option in the LTWRAPPER_OPTION_PREFIX
+ namespace, but it is not one of the ones we know about and
+ have already dealt with, above (inluding dump-script), then
+ report an error. Otherwise, targets might begin to believe
+ they are allowed to use options in the LTWRAPPER_OPTION_PREFIX
+ namespace. The first time any user complains about this, we'll
+ need to make LTWRAPPER_OPTION_PREFIX a configure-time option
+ or a configure.ac-settable value.
+ */
+ lt_fatal ("Unrecognized option in %s namespace: '%s'",
+ ltwrapper_option_prefix, argv[i]);
+ }
+ /* otherwise ... */
+ newargz[++newargc] = xstrdup (argv[i]);
+ }
+ newargz[++newargc] = NULL;
+
+ LTWRAPPER_DEBUGPRINTF (("(main) lt_argv_zero : %s\n", (lt_argv_zero ? lt_argv_zero : "<NULL>")));
+ for (i = 0; i < newargc; i++)
+ {
+ LTWRAPPER_DEBUGPRINTF (("(main) newargz[%d] : %s\n", i, (newargz[i] ? newargz[i] : "<NULL>")));
+ }
+
+EOF
+
+ case $host_os in
+ mingw*)
+ cat <<"EOF"
+ /* execv doesn't actually work on mingw as expected on unix */
+ rval = _spawnv (_P_WAIT, lt_argv_zero, (const char * const *) newargz);
+ if (rval == -1)
+ {
+ /* failed to start process */
+ LTWRAPPER_DEBUGPRINTF (("(main) failed to launch target \"%s\": errno = %d\n", lt_argv_zero, errno));
+ return 127;
+ }
+ return rval;
+EOF
+ ;;
+ *)
+ cat <<"EOF"
+ execv (lt_argv_zero, newargz);
+ return rval; /* =127, but avoids unused variable warning */
+EOF
+ ;;
+ esac
+
+ cat <<"EOF"
+}
+
+void *
+xmalloc (size_t num)
+{
+ void *p = (void *) malloc (num);
+ if (!p)
+ lt_fatal ("Memory exhausted");
+
+ return p;
+}
+
+char *
+xstrdup (const char *string)
+{
+ return string ? strcpy ((char *) xmalloc (strlen (string) + 1),
+ string) : NULL;
+}
+
+const char *
+base_name (const char *name)
+{
+ const char *base;
+
+#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
+ /* Skip over the disk name in MSDOS pathnames. */
+ if (isalpha ((unsigned char) name[0]) && name[1] == ':')
+ name += 2;
+#endif
+
+ for (base = name; *name; name++)
+ if (IS_DIR_SEPARATOR (*name))
+ base = name + 1;
+ return base;
+}
+
+int
+check_executable (const char *path)
+{
+ struct stat st;
+
+ LTWRAPPER_DEBUGPRINTF (("(check_executable) : %s\n",
+ path ? (*path ? path : "EMPTY!") : "NULL!"));
+ if ((!path) || (!*path))
+ return 0;
+
+ if ((stat (path, &st) >= 0)
+ && (st.st_mode & (S_IXUSR | S_IXGRP | S_IXOTH)))
+ return 1;
+ else
+ return 0;
+}
+
+int
+make_executable (const char *path)
+{
+ int rval = 0;
+ struct stat st;
+
+ LTWRAPPER_DEBUGPRINTF (("(make_executable) : %s\n",
+ path ? (*path ? path : "EMPTY!") : "NULL!"));
+ if ((!path) || (!*path))
+ return 0;
+
+ if (stat (path, &st) >= 0)
+ {
+ rval = chmod (path, st.st_mode | S_IXOTH | S_IXGRP | S_IXUSR);
+ }
+ return rval;
+}
+
+/* Searches for the full path of the wrapper. Returns
+ newly allocated full path name if found, NULL otherwise
+ Does not chase symlinks, even on platforms that support them.
+*/
+char *
+find_executable (const char *wrapper)
+{
+ int has_slash = 0;
+ const char *p;
+ const char *p_next;
+ /* static buffer for getcwd */
+ char tmp[LT_PATHMAX + 1];
+ int tmp_len;
+ char *concat_name;
+
+ LTWRAPPER_DEBUGPRINTF (("(find_executable) : %s\n",
+ wrapper ? (*wrapper ? wrapper : "EMPTY!") : "NULL!"));
+
+ if ((wrapper == NULL) || (*wrapper == '\0'))
+ return NULL;
+
+ /* Absolute path? */
+#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
+ if (isalpha ((unsigned char) wrapper[0]) && wrapper[1] == ':')
+ {
+ concat_name = xstrdup (wrapper);
+ if (check_executable (concat_name))
+ return concat_name;
+ XFREE (concat_name);
+ }
+ else
+ {
+#endif
+ if (IS_DIR_SEPARATOR (wrapper[0]))
+ {
+ concat_name = xstrdup (wrapper);
+ if (check_executable (concat_name))
+ return concat_name;
+ XFREE (concat_name);
+ }
+#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
+ }
+#endif
+
+ for (p = wrapper; *p; p++)
+ if (*p == '/')
+ {
+ has_slash = 1;
+ break;
+ }
+ if (!has_slash)
+ {
+ /* no slashes; search PATH */
+ const char *path = getenv ("PATH");
+ if (path != NULL)
+ {
+ for (p = path; *p; p = p_next)
+ {
+ const char *q;
+ size_t p_len;
+ for (q = p; *q; q++)
+ if (IS_PATH_SEPARATOR (*q))
+ break;
+ p_len = q - p;
+ p_next = (*q == '\0' ? q : q + 1);
+ if (p_len == 0)
+ {
+ /* empty path: current directory */
+ if (getcwd (tmp, LT_PATHMAX) == NULL)
+ lt_fatal ("getcwd failed");
+ tmp_len = strlen (tmp);
+ concat_name =
+ XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1);
+ memcpy (concat_name, tmp, tmp_len);
+ concat_name[tmp_len] = '/';
+ strcpy (concat_name + tmp_len + 1, wrapper);
+ }
+ else
+ {
+ concat_name =
+ XMALLOC (char, p_len + 1 + strlen (wrapper) + 1);
+ memcpy (concat_name, p, p_len);
+ concat_name[p_len] = '/';
+ strcpy (concat_name + p_len + 1, wrapper);
+ }
+ if (check_executable (concat_name))
+ return concat_name;
+ XFREE (concat_name);
+ }
+ }
+ /* not found in PATH; assume curdir */
+ }
+ /* Relative path | not found in path: prepend cwd */
+ if (getcwd (tmp, LT_PATHMAX) == NULL)
+ lt_fatal ("getcwd failed");
+ tmp_len = strlen (tmp);
+ concat_name = XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1);
+ memcpy (concat_name, tmp, tmp_len);
+ concat_name[tmp_len] = '/';
+ strcpy (concat_name + tmp_len + 1, wrapper);
+
+ if (check_executable (concat_name))
+ return concat_name;
+ XFREE (concat_name);
+ return NULL;
+}
+
+char *
+chase_symlinks (const char *pathspec)
+{
+#ifndef S_ISLNK
+ return xstrdup (pathspec);
+#else
+ char buf[LT_PATHMAX];
+ struct stat s;
+ char *tmp_pathspec = xstrdup (pathspec);
+ char *p;
+ int has_symlinks = 0;
+ while (strlen (tmp_pathspec) && !has_symlinks)
+ {
+ LTWRAPPER_DEBUGPRINTF (("checking path component for symlinks: %s\n",
+ tmp_pathspec));
+ if (lstat (tmp_pathspec, &s) == 0)
+ {
+ if (S_ISLNK (s.st_mode) != 0)
+ {
+ has_symlinks = 1;
+ break;
+ }
+
+ /* search backwards for last DIR_SEPARATOR */
+ p = tmp_pathspec + strlen (tmp_pathspec) - 1;
+ while ((p > tmp_pathspec) && (!IS_DIR_SEPARATOR (*p)))
+ p--;
+ if ((p == tmp_pathspec) && (!IS_DIR_SEPARATOR (*p)))
+ {
+ /* no more DIR_SEPARATORS left */
+ break;
+ }
+ *p = '\0';
+ }
+ else
+ {
+ char *errstr = strerror (errno);
+ lt_fatal ("Error accessing file %s (%s)", tmp_pathspec, errstr);
+ }
+ }
+ XFREE (tmp_pathspec);
+
+ if (!has_symlinks)
+ {
+ return xstrdup (pathspec);
+ }
+
+ tmp_pathspec = realpath (pathspec, buf);
+ if (tmp_pathspec == 0)
+ {
+ lt_fatal ("Could not follow symlinks for %s", pathspec);
+ }
+ return xstrdup (tmp_pathspec);
+#endif
+}
+
+char *
+strendzap (char *str, const char *pat)
+{
+ size_t len, patlen;
+
+ assert (str != NULL);
+ assert (pat != NULL);
+
+ len = strlen (str);
+ patlen = strlen (pat);
+
+ if (patlen <= len)
+ {
+ str += len - patlen;
+ if (strcmp (str, pat) == 0)
+ *str = '\0';
+ }
+ return str;
+}
+
+static void
+lt_error_core (int exit_status, const char *mode,
+ const char *message, va_list ap)
+{
+ fprintf (stderr, "%s: %s: ", program_name, mode);
+ vfprintf (stderr, message, ap);
+ fprintf (stderr, ".\n");
+
+ if (exit_status >= 0)
+ exit (exit_status);
+}
+
+void
+lt_fatal (const char *message, ...)
+{
+ va_list ap;
+ va_start (ap, message);
+ lt_error_core (EXIT_FAILURE, "FATAL", message, ap);
+ va_end (ap);
+}
+
+void
+lt_setenv (const char *name, const char *value)
+{
+ LTWRAPPER_DEBUGPRINTF (("(lt_setenv) setting '%s' to '%s'\n",
+ (name ? name : "<NULL>"),
+ (value ? value : "<NULL>")));
+ {
+#ifdef HAVE_SETENV
+ /* always make a copy, for consistency with !HAVE_SETENV */
+ char *str = xstrdup (value);
+ setenv (name, str, 1);
+#else
+ int len = strlen (name) + 1 + strlen (value) + 1;
+ char *str = XMALLOC (char, len);
+ sprintf (str, "%s=%s", name, value);
+ if (putenv (str) != EXIT_SUCCESS)
+ {
+ XFREE (str);
+ }
+#endif
+ }
+}
+
+char *
+lt_extend_str (const char *orig_value, const char *add, int to_end)
+{
+ char *new_value;
+ if (orig_value && *orig_value)
+ {
+ int orig_value_len = strlen (orig_value);
+ int add_len = strlen (add);
+ new_value = XMALLOC (char, add_len + orig_value_len + 1);
+ if (to_end)
+ {
+ strcpy (new_value, orig_value);
+ strcpy (new_value + orig_value_len, add);
+ }
+ else
+ {
+ strcpy (new_value, add);
+ strcpy (new_value + add_len, orig_value);
+ }
+ }
+ else
+ {
+ new_value = xstrdup (add);
+ }
+ return new_value;
+}
+
+int
+lt_split_name_value (const char *arg, char** name, char** value)
+{
+ const char *p;
+ int len;
+ if (!arg || !*arg)
+ return 1;
+
+ p = strchr (arg, (int)'=');
+
+ if (!p)
+ return 1;
+
+ *value = xstrdup (++p);
+
+ len = strlen (arg) - strlen (*value);
+ *name = XMALLOC (char, len);
+ strncpy (*name, arg, len-1);
+ (*name)[len - 1] = '\0';
+
+ return 0;
+}
+
+void
+lt_opt_process_env_set (const char *arg)
+{
+ char *name = NULL;
+ char *value = NULL;
+
+ if (lt_split_name_value (arg, &name, &value) != 0)
+ {
+ XFREE (name);
+ XFREE (value);
+ lt_fatal ("bad argument for %s: '%s'", env_set_opt, arg);
+ }
+
+ lt_setenv (name, value);
+ XFREE (name);
+ XFREE (value);
+}
+
+void
+lt_opt_process_env_prepend (const char *arg)
+{
+ char *name = NULL;
+ char *value = NULL;
+ char *new_value = NULL;
+
+ if (lt_split_name_value (arg, &name, &value) != 0)
+ {
+ XFREE (name);
+ XFREE (value);
+ lt_fatal ("bad argument for %s: '%s'", env_prepend_opt, arg);
+ }
+
+ new_value = lt_extend_str (getenv (name), value, 0);
+ lt_setenv (name, new_value);
+ XFREE (new_value);
+ XFREE (name);
+ XFREE (value);
+}
+
+void
+lt_opt_process_env_append (const char *arg)
+{
+ char *name = NULL;
+ char *value = NULL;
+ char *new_value = NULL;
+
+ if (lt_split_name_value (arg, &name, &value) != 0)
+ {
+ XFREE (name);
+ XFREE (value);
+ lt_fatal ("bad argument for %s: '%s'", env_append_opt, arg);
+ }
+
+ new_value = lt_extend_str (getenv (name), value, 1);
+ lt_setenv (name, new_value);
+ XFREE (new_value);
+ XFREE (name);
+ XFREE (value);
+}
+
+void
+lt_update_exe_path (const char *name, const char *value)
+{
+ LTWRAPPER_DEBUGPRINTF (("(lt_update_exe_path) modifying '%s' by prepending '%s'\n",
+ (name ? name : "<NULL>"),
+ (value ? value : "<NULL>")));
+
+ if (name && *name && value && *value)
+ {
+ char *new_value = lt_extend_str (getenv (name), value, 0);
+ /* some systems can't cope with a ':'-terminated path #' */
+ int len = strlen (new_value);
+ while (((len = strlen (new_value)) > 0) && IS_PATH_SEPARATOR (new_value[len-1]))
+ {
+ new_value[len-1] = '\0';
+ }
+ lt_setenv (name, new_value);
+ XFREE (new_value);
+ }
+}
+
+void
+lt_update_lib_path (const char *name, const char *value)
+{
+ LTWRAPPER_DEBUGPRINTF (("(lt_update_lib_path) modifying '%s' by prepending '%s'\n",
+ (name ? name : "<NULL>"),
+ (value ? value : "<NULL>")));
+
+ if (name && *name && value && *value)
+ {
+ char *new_value = lt_extend_str (getenv (name), value, 0);
+ lt_setenv (name, new_value);
+ XFREE (new_value);
+ }
+}
+
+
+EOF
+}
+# end: func_emit_cwrapperexe_src
+
# func_mode_link arg...
func_mode_link ()
{
$opt_debug
case $host in
- *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
+ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
# It is impossible to link a dll without this setting, and
# we shouldn't force the makefile maintainer to figure out
# which system we are compiling for in order to pass an extra
@@ -2681,9 +4120,6 @@
fi
if test -n "$link_static_flag"; then
dlopen_self=$dlopen_self_static
- # See comment for -static flag below, for more details.
- func_append compile_command " $link_static_flag"
- func_append finalize_command " $link_static_flag"
fi
prefer_static_libs=yes
;;
@@ -2789,7 +4225,7 @@
;;
esac
;;
- esac
+ esac
prev=
continue
;;
@@ -2927,7 +4363,7 @@
continue
;;
shrext)
- shrext_cmds="$arg"
+ shrext_cmds="$arg"
prev=
continue
;;
@@ -2971,7 +4407,11 @@
case $arg in
-all-static)
- # The effects of -all-static are defined in a previous loop.
+ if test -n "$link_static_flag"; then
+ # See comment for -static flag below, for more details.
+ func_append compile_command " $link_static_flag"
+ func_append finalize_command " $link_static_flag"
+ fi
continue
;;
@@ -3055,7 +4495,7 @@
;;
esac
case $host in
- *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
+ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
testbindir=`$ECHO "X$dir" | $Xsed -e 's*/lib$*/bin*'`
case :$dllsearchpath: in
*":$dir:"*) ;;
@@ -3073,7 +4513,7 @@
-l*)
if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then
case $host in
- *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos*)
+ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos* | *-cegcc*)
# These systems don't actually have a C or math library (as such)
continue
;;
@@ -3150,9 +4590,9 @@
-no-install)
case $host in
- *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
+ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-darwin* | *-cegcc*)
# The PATH hackery in wrapper scripts is required on Windows
- # in order for the loader to find any dlls it needs.
+ # and Darwin in order for the loader to find any dlls it needs.
func_warning "\`-no-install' is ignored for $host"
func_warning "assuming \`-no-fast-install' instead"
fast_install=no
@@ -3299,6 +4739,12 @@
continue
;;
+ # -msg_* for osf cc
+ -msg_*)
+ func_quote_for_eval "$arg"
+ arg="$func_quote_for_eval_result"
+ ;;
+
# -64, -mips[0-9] enable 64-bit mode on the SGI compiler
# -r[0-9][0-9]* specifies the processor on the SGI compiler
# -xarch=*, -xtarget=* enable 64-bit mode on the Sun compiler
@@ -3634,7 +5080,12 @@
fi
func_stripname '-l' '' "$deplib"
name=$func_stripname_result
- for searchdir in $newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path; do
+ if test "$linkmode" = lib; then
+ searchdirs="$newlib_search_path $lib_search_path $compiler_lib_search_dirs $sys_lib_search_path $shlib_search_path"
+ else
+ searchdirs="$newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path"
+ fi
+ for searchdir in $searchdirs; do
for search_ext in .la $std_shrext .so .a; do
# Search the libtool library
lib="$searchdir/lib${name}${search_ext}"
@@ -3867,12 +5318,6 @@
done
fi
dependency_libs=`$ECHO "X $dependency_libs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
- if test "$linkmode,$pass" = "prog,link"; then
- compile_deplibs="$new_inherited_linker_flags $compile_deplibs"
- finalize_deplibs="$new_inherited_linker_flags $finalize_deplibs"
- else
- compiler_flags="$compiler_flags $inherited_linker_flags"
- fi
if test "$linkmode,$pass" = "lib,link" ||
test "$linkmode,$pass" = "prog,scan" ||
{ test "$linkmode" != prog && test "$linkmode" != lib; }; then
@@ -4102,7 +5547,7 @@
if test -n "$library_names" &&
{ test "$use_static_libs" = no || test -z "$old_library"; }; then
case $host in
- *cygwin* | *mingw*)
+ *cygwin* | *mingw* | *cegcc*)
# No point in relinking DLLs because paths are not encoded
notinst_deplibs="$notinst_deplibs $lib"
need_relink=no
@@ -4172,8 +5617,9 @@
elif test -n "$soname_spec"; then
# bleh windows
case $host in
- *cygwin* | mingw*)
- major=`expr $current - $age`
+ *cygwin* | mingw* | *cegcc*)
+ func_arith $current - $age
+ major=$func_arith_result
versuffix="-$major"
;;
esac
@@ -4192,13 +5638,13 @@
# If the library has no export list, then create one now
if test -f "$output_objdir/$soname-def"; then :
else
- func_echo "extracting exported symbol list from \`$soname'"
+ func_verbose "extracting exported symbol list from \`$soname'"
func_execute_cmds "$extract_expsyms_cmds" 'exit $?'
fi
# Create $newlib
if test -f "$output_objdir/$newlib"; then :; else
- func_echo "generating import library for \`$soname'"
+ func_verbose "generating import library for \`$soname'"
func_execute_cmds "$old_archive_from_expsyms_cmds" 'exit $?'
fi
# make sure the library variables are pointing to the new library
@@ -4465,11 +5911,9 @@
done
if test -f "$absdir/$objdir/$depdepl" ; then
depdepl="$absdir/$objdir/$depdepl"
- darwin_install_name=`otool -L $depdepl | $SED -n -e '3q;2,2p' | $SED -e 's/(.*//'`
- darwin_install_name=`$ECHO $darwin_install_name`
+ darwin_install_name=`${OTOOL} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'`
if test -z "$darwin_install_name"; then
- darwin_install_name=`otool64 -L $depdepl | $SED -n -e '3q;2,2p' | $SED -e 's/(.*//'`
- darwin_install_name=`$ECHO $darwin_install_name`
+ darwin_install_name=`${OTOOL64} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'`
fi
compiler_flags="$compiler_flags ${wl}-dylib_file ${wl}${darwin_install_name}:${depdepl}"
linker_flags="$linker_flags -dylib_file ${darwin_install_name}:${depdepl}"
@@ -4500,6 +5944,14 @@
fi # link_all_deplibs != no
fi # linkmode = lib
done # for deplib in $libs
+ if test "$pass" = link; then
+ if test "$linkmode" = "prog"; then
+ compile_deplibs="$new_inherited_linker_flags $compile_deplibs"
+ finalize_deplibs="$new_inherited_linker_flags $finalize_deplibs"
+ else
+ compiler_flags="$compiler_flags "`$ECHO "X $new_inherited_linker_flags" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
+ fi
+ fi
dependency_libs="$newdependency_libs"
if test "$pass" = dlpreopen; then
# Link the dlpreopened libraries before other libraries
@@ -4609,10 +6061,11 @@
func_warning "\`-dlopen' is ignored for archives"
fi
- test -n "$deplibs" && \
- func_warning "\`-l' and \`-L' are ignored for archives"
+ case " $deplibs" in
+ *\ -l* | *\ -L*)
+ func_warning "\`-l' and \`-L' are ignored for archives" ;;
+ esac
-
test -n "$rpath" && \
func_warning "\`-rpath' is ignored for archives"
@@ -4727,7 +6180,8 @@
#
case $version_type in
darwin|linux|osf|windows|none)
- current=`expr $number_major + $number_minor`
+ func_arith $number_major + $number_minor
+ current=$func_arith_result
age="$number_minor"
revision="$number_revision"
;;
@@ -4737,9 +6191,11 @@
age="0"
;;
irix|nonstopux)
- current=`expr $number_major + $number_minor - 1`
+ func_arith $number_major + $number_minor
+ current=$func_arith_result
age="$number_minor"
revision="$number_minor"
+ lt_irix_increment=no
;;
esac
;;
@@ -4790,10 +6246,13 @@
darwin)
# Like Linux, but with the current version available in
# verstring for coding it into the library header
- major=.`expr $current - $age`
+ func_arith $current - $age
+ major=.$func_arith_result
versuffix="$major.$age.$revision"
# Darwin ld doesn't like 0 for these options...
- minor_current=`expr $current + 1`
+ func_arith $current + 1
+ minor_current=$func_arith_result
+ xlcverstring="${wl}-compatibility_version ${wl}$minor_current ${wl}-current_version ${wl}$minor_current.$revision"
verstring="-compatibility_version $minor_current -current_version $minor_current.$revision"
;;
@@ -4808,7 +6267,12 @@
;;
irix | nonstopux)
- major=`expr $current - $age + 1`
+ if test "X$lt_irix_increment" = "Xno"; then
+ func_arith $current - $age
+ else
+ func_arith $current - $age + 1
+ fi
+ major=$func_arith_result
case $version_type in
nonstopux) verstring_prefix=nonstopux ;;
@@ -4819,8 +6283,10 @@
# Add in all the interfaces that we are compatible with.
loop=$revision
while test "$loop" -ne 0; do
- iface=`expr $revision - $loop`
- loop=`expr $loop - 1`
+ func_arith $revision - $loop
+ iface=$func_arith_result
+ func_arith $loop - 1
+ loop=$func_arith_result
verstring="$verstring_prefix$major.$iface:$verstring"
done
@@ -4830,20 +6296,24 @@
;;
linux)
- major=.`expr $current - $age`
+ func_arith $current - $age
+ major=.$func_arith_result
versuffix="$major.$age.$revision"
;;
osf)
- major=.`expr $current - $age`
+ func_arith $current - $age
+ major=.$func_arith_result
versuffix=".$current.$age.$revision"
verstring="$current.$age.$revision"
# Add in all the interfaces that we are compatible with.
loop=$age
while test "$loop" -ne 0; do
- iface=`expr $current - $loop`
- loop=`expr $loop - 1`
+ func_arith $current - $loop
+ iface=$func_arith_result
+ func_arith $loop - 1
+ loop=$func_arith_result
verstring="$verstring:${iface}.0"
done
@@ -4864,7 +6334,8 @@
windows)
# Use '-' rather than '.', since we only want one
# extension on DOS 8.3 filesystems.
- major=`expr $current - $age`
+ func_arith $current - $age
+ major=$func_arith_result
versuffix="-$major"
;;
@@ -4996,7 +6467,7 @@
if test "$build_libtool_libs" = yes; then
if test -n "$rpath"; then
case $host in
- *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos*)
+ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos* | *-cegcc*)
# these systems don't actually have a c library (as such)!
;;
*-*-rhapsody* | *-*-darwin1.[012])
@@ -5014,8 +6485,8 @@
;;
*-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)
# Compiler inserts libc in the correct place for threads to work
- ;;
- *)
+ ;;
+ *)
# Add libc to deplibs on all other systems if necessary.
if test "$build_libtool_need_lc" = "yes"; then
deplibs="$deplibs -lc"
@@ -5060,9 +6531,10 @@
if $LTCC $LTCFLAGS -o conftest conftest.c $deplibs; then
ldd_output=`ldd conftest`
for i in $deplibs; do
- name=`expr $i : '-l\(.*\)'`
- # If $name is empty we are operating on a -L argument.
- if test "$name" != "" && test "$name" != "0"; then
+ case $i in
+ -l*)
+ func_stripname -l '' "$i"
+ name=$func_stripname_result
if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
case " $predeps $postdeps " in
*" $i "*)
@@ -5089,17 +6561,20 @@
$ECHO "*** its dynamic dependency list that programs get resolved with at runtime."
fi
fi
- else
+ ;;
+ *)
newdeplibs="$newdeplibs $i"
- fi
+ ;;
+ esac
done
else
# Error occurred in the first compile. Let's try to salvage
# the situation: Compile a separate program for each library.
for i in $deplibs; do
- name=`expr $i : '-l\(.*\)'`
- # If $name is empty we are operating on a -L argument.
- if test "$name" != "" && test "$name" != "0"; then
+ case $i in
+ -l*)
+ func_stripname -l '' "$i"
+ name=$func_stripname_result
$opt_dry_run || $RM conftest
if $LTCC $LTCFLAGS -o conftest conftest.c $i; then
ldd_output=`ldd conftest`
@@ -5137,9 +6612,11 @@
$ECHO "*** library that it depends on before this library will be fully"
$ECHO "*** functional. Installing it before continuing would be even better."
fi
- else
+ ;;
+ *)
newdeplibs="$newdeplibs $i"
- fi
+ ;;
+ esac
done
fi
;;
@@ -5147,9 +6624,10 @@
set dummy $deplibs_check_method; shift
file_magic_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
for a_deplib in $deplibs; do
- name=`expr $a_deplib : '-l\(.*\)'`
- # If $name is empty we are operating on a -L argument.
- if test "$name" != "" && test "$name" != "0"; then
+ case $a_deplib in
+ -l*)
+ func_stripname -l '' "$a_deplib"
+ name=$func_stripname_result
if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
case " $predeps $postdeps " in
*" $a_deplib "*)
@@ -5206,19 +6684,22 @@
$ECHO "*** using a file magic. Last file checked: $potlib"
fi
fi
- else
+ ;;
+ *)
# Add a -L argument.
newdeplibs="$newdeplibs $a_deplib"
- fi
+ ;;
+ esac
done # Gone through all deplibs.
;;
match_pattern*)
set dummy $deplibs_check_method; shift
match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
for a_deplib in $deplibs; do
- name=`expr $a_deplib : '-l\(.*\)'`
- # If $name is empty we are operating on a -L argument.
- if test -n "$name" && test "$name" != "0"; then
+ case $a_deplib in
+ -l*)
+ func_stripname -l '' "$a_deplib"
+ name=$func_stripname_result
if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
case " $predeps $postdeps " in
*" $a_deplib "*)
@@ -5257,10 +6738,12 @@
$ECHO "*** using a regex pattern. Last file checked: $potlib"
fi
fi
- else
+ ;;
+ *)
# Add a -L argument.
newdeplibs="$newdeplibs $a_deplib"
- fi
+ ;;
+ esac
done # Gone through all deplibs.
;;
none | unknown | *)
@@ -5273,7 +6756,7 @@
tmp_deplibs=`$ECHO "X $tmp_deplibs" | $Xsed -e "s,$i,,"`
done
fi
- if $ECHO "X $tmp_deplibs" | $Xsed -e 's/[ ]//g' |
+ if $ECHO "X $tmp_deplibs" | $Xsed -e 's/[ ]//g' |
$GREP . >/dev/null; then
$ECHO
if test "X$deplibs_check_method" = "Xnone"; then
@@ -5483,7 +6966,7 @@
orig_export_symbols=
case $host_os in
- cygwin* | mingw*)
+ cygwin* | mingw* | cegcc*)
if test -n "$export_symbols" && test -z "$export_symbols_regex"; then
# exporting using user supplied symfile
if test "x`$SED 1q $export_symbols`" != xEXPORTS; then
@@ -5504,7 +6987,7 @@
# Prepare the list of exported symbols
if test -z "$export_symbols"; then
if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then
- func_echo "generating symbol list for \`$libname.la'"
+ func_verbose "generating symbol list for \`$libname.la'"
export_symbols="$output_objdir/$libname.exp"
$opt_dry_run || $RM $export_symbols
cmds=$export_symbols_cmds
@@ -5512,13 +6995,14 @@
for cmd in $cmds; do
IFS="$save_ifs"
eval cmd=\"$cmd\"
- if len=`expr "X$cmd" : ".*"` &&
- test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then
+ func_len " $cmd"
+ len=$func_len_result
+ if test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then
func_show_eval "$cmd" 'exit $?'
skipped_export=false
else
# The command line is too long to execute in one step.
- func_echo "using reloadable object file for export list..."
+ func_verbose "using reloadable object file for export list..."
skipped_export=:
# Break out early, otherwise skipped_export may be
# set to false by a later but shorter cmd.
@@ -5541,7 +7025,7 @@
if test "X$skipped_export" != "X:" && test -n "$orig_export_symbols"; then
# The given exports_symbols file has to be filtered, so filter it.
- func_echo "filter symbol list for \`$libname.la' to tag DATA exports"
+ func_verbose "filter symbol list for \`$libname.la' to tag DATA exports"
# FIXME: $output_objdir/$libname.filter potentially contains lots of
# 's' commands which not all seds can handle. GNU sed should be fine
# though. Also, the filter scales superlinearly with the number of
@@ -5616,8 +7100,9 @@
fi
if test "X$skipped_export" != "X:" &&
- len=`expr "X$test_cmds" : ".*" 2>/dev/null` &&
- test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then
+ func_len " $test_cmds" &&
+ len=$func_len_result &&
+ test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then
:
else
# The command line is too long to link in one step, link piecewise
@@ -5648,7 +7133,7 @@
if test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "$with_gnu_ld" = yes; then
output=${output_objdir}/${output_la}.lnkscript
- func_echo "creating GNU ld script: $output"
+ func_verbose "creating GNU ld script: $output"
$ECHO 'INPUT (' > $output
for obj in $save_libobjs
do
@@ -5658,7 +7143,7 @@
delfiles="$delfiles $output"
elif test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "X$file_list_spec" != X; then
output=${output_objdir}/${output_la}.lnk
- func_echo "creating linker input file list: $output"
+ func_verbose "creating linker input file list: $output"
: > $output
set x $save_libobjs
shift
@@ -5675,16 +7160,22 @@
output=$firstobj\"$file_list_spec$output\"
else
if test -n "$save_libobjs"; then
- func_echo "creating reloadable object files..."
+ func_verbose "creating reloadable object files..."
output=$output_objdir/$output_la-${k}.$objext
+ eval test_cmds=\"$reload_cmds\"
+ func_len " $test_cmds"
+ len0=$func_len_result
+ len=$len0
+
# Loop over the list of objects to be linked.
for obj in $save_libobjs
do
- eval test_cmds=\"$reload_cmds $objlist $last_robj\"
+ func_len " $obj"
+ func_arith $len + $func_len_result
+ len=$func_arith_result
if test "X$objlist" = X ||
- { len=`expr "X$test_cmds" : ".*" 2>/dev/null` &&
- test "$len" -le "$max_cmd_len"; }; then
- objlist="$objlist $obj"
+ test "$len" -lt "$max_cmd_len"; then
+ func_append objlist " $obj"
else
# The command $test_cmds is almost too long, add a
# command to the queue.
@@ -5694,13 +7185,16 @@
else
# All subsequent reloadable object files will link in
# the last one created.
- eval concat_cmds=\"\$concat_cmds~$reload_cmds $objlist $last_robj\"
+ eval concat_cmds=\"\$concat_cmds~$reload_cmds $objlist $last_robj~\$RM $last_robj\"
fi
last_robj=$output_objdir/$output_la-${k}.$objext
- k=`expr $k + 1`
+ func_arith $k + 1
+ k=$func_arith_result
output=$output_objdir/$output_la-${k}.$objext
objlist=$obj
- len=1
+ func_len " $last_robj"
+ func_arith $len0 + $func_len_result
+ len=$func_arith_result
fi
done
# Handle the remaining objects by creating one last
@@ -5708,31 +7202,30 @@
# files will link in the last one created.
test -z "$concat_cmds" || concat_cmds=$concat_cmds~
eval concat_cmds=\"\${concat_cmds}$reload_cmds $objlist $last_robj\"
+ if test -n "$last_robj"; then
+ eval concat_cmds=\"\${concat_cmds}~\$RM $last_robj\"
+ fi
+ delfiles="$delfiles $output"
- # Set up a command to remove the reloadable object files
- # after they are used.
- i=0
- while test "$i" -lt "$k"
- do
- i=`expr $i + 1`
- delfiles="$delfiles $output_objdir/$output_la-${i}.$objext"
- done
else
output=
fi
if ${skipped_export-false}; then
- func_echo "generating symbol list for \`$libname.la'"
+ func_verbose "generating symbol list for \`$libname.la'"
export_symbols="$output_objdir/$libname.exp"
$opt_dry_run || $RM $export_symbols
libobjs=$output
# Append the command to create the export file.
test -z "$concat_cmds" || concat_cmds=$concat_cmds~
eval concat_cmds=\"\$concat_cmds$export_symbols_cmds\"
+ if test -n "$last_robj"; then
+ eval concat_cmds=\"\$concat_cmds~\$RM $last_robj\"
+ fi
fi
test -n "$save_libobjs" &&
- func_echo "creating a temporary reloadable object file: $output"
+ func_verbose "creating a temporary reloadable object file: $output"
# Loop through the commands generated above and execute them.
save_ifs="$IFS"; IFS='~'
@@ -5772,7 +7265,7 @@
if test -n "$orig_export_symbols"; then
# The given exports_symbols file has to be filtered, so filter it.
- func_echo "filter symbol list for \`$libname.la' to tag DATA exports"
+ func_verbose "filter symbol list for \`$libname.la' to tag DATA exports"
# FIXME: $output_objdir/$libname.filter potentially contains lots of
# 's' commands which not all seds can handle. GNU sed should be fine
# though. Also, the filter scales superlinearly with the number of
@@ -5883,8 +7376,10 @@
func_warning "\`-dlopen' is ignored for objects"
fi
- test -n "$deplibs" && \
- func_warning "\`-l' and \`-L' are ignored for objects"
+ case " $deplibs" in
+ *\ -l* | *\ -L*)
+ func_warning "\`-l' and \`-L' are ignored for objects" ;;
+ esac
test -n "$rpath" && \
func_warning "\`-rpath' is ignored for objects"
@@ -6096,7 +7591,7 @@
esac
fi
case $host in
- *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
+ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
testbindir=`${ECHO} "$libdir" | ${SED} -e 's*/lib$*/bin*'`
case :$dllsearchpath: in
*":$libdir:"*) ;;
@@ -6173,6 +7668,10 @@
wrappers_required=no
fi
;;
+ *cegcc)
+ # Disable wrappers for cegcc, we are cross compiling anyway.
+ wrappers_required=no
+ ;;
*)
if test "$need_relink" = no || test "$build_libtool_libs" != yes; then
wrappers_required=no
@@ -6267,7 +7766,7 @@
func_show_eval "$link_command" 'exit $?'
# Now create the wrapper script.
- func_echo "creating $output"
+ func_verbose "creating $output"
# Quote the relink command for shipping.
if test -n "$relink_command"; then
@@ -6315,553 +7814,46 @@
esac
case $host in
*cygwin* | *mingw* )
- output_name=`basename $output`
- output_path=`dirname $output`
+ func_dirname_and_basename "$output" "" "."
+ output_name=$func_basename_result
+ output_path=$func_dirname_result
cwrappersource="$output_path/$objdir/lt-$output_name.c"
cwrapper="$output_path/$output_name.exe"
$RM $cwrappersource $cwrapper
trap "$RM $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15
- cat > $cwrappersource <<EOF
+ func_emit_cwrapperexe_src > $cwrappersource
-/* $cwrappersource - temporary wrapper executable for $objdir/$outputname
- Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
+ # The wrapper executable is built using the $host compiler,
+ # because it contains $host paths and files. If cross-
+ # compiling, it, like the target executable, must be
+ # executed on the $host or under an emulation environment.
+ $opt_dry_run || {
+ $LTCC $LTCFLAGS -o $cwrapper $cwrappersource
+ $STRIP $cwrapper
+ }
- The $output program cannot be directly executed until all the libtool
- libraries that it depends on are installed.
-
- This wrapper executable should never be moved out of the build directory.
- If it is, it will not operate correctly.
-
- Currently, it simply execs the wrapper *script* "/bin/sh $output",
- but could eventually absorb all of the scripts functionality and
- exec $objdir/$outputname directly.
-*/
-EOF
- cat >> $cwrappersource<<"EOF"
-#include <stdio.h>
-#include <stdlib.h>
-#include <unistd.h>
-#include <malloc.h>
-#include <stdarg.h>
-#include <assert.h>
-#include <string.h>
-#include <ctype.h>
-#include <sys/stat.h>
-
-#if defined(PATH_MAX)
-# define LT_PATHMAX PATH_MAX
-#elif defined(MAXPATHLEN)
-# define LT_PATHMAX MAXPATHLEN
-#else
-# define LT_PATHMAX 1024
-#endif
-
-#ifndef DIR_SEPARATOR
-# define DIR_SEPARATOR '/'
-# define PATH_SEPARATOR ':'
-#endif
-
-#if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \
- defined (__OS2__)
-# define HAVE_DOS_BASED_FILE_SYSTEM
-# ifndef DIR_SEPARATOR_2
-# define DIR_SEPARATOR_2 '\\'
-# endif
-# ifndef PATH_SEPARATOR_2
-# define PATH_SEPARATOR_2 ';'
-# endif
-#endif
-
-#ifndef DIR_SEPARATOR_2
-# define IS_DIR_SEPARATOR(ch) ((ch) == DIR_SEPARATOR)
-#else /* DIR_SEPARATOR_2 */
-# define IS_DIR_SEPARATOR(ch) \
- (((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2))
-#endif /* DIR_SEPARATOR_2 */
-
-#ifndef PATH_SEPARATOR_2
-# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR)
-#else /* PATH_SEPARATOR_2 */
-# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2)
-#endif /* PATH_SEPARATOR_2 */
-
-#define XMALLOC(type, num) ((type *) xmalloc ((num) * sizeof(type)))
-#define XFREE(stale) do { \
- if (stale) { free ((void *) stale); stale = 0; } \
-} while (0)
-
-/* -DDEBUG is fairly common in CFLAGS. */
-#undef DEBUG
-#if defined DEBUGWRAPPER
-# define DEBUG(format, ...) fprintf(stderr, format, __VA_ARGS__)
-#else
-# define DEBUG(format, ...)
-#endif
-
-const char *program_name = NULL;
-
-void * xmalloc (size_t num);
-char * xstrdup (const char *string);
-const char * base_name (const char *name);
-char * find_executable(const char *wrapper);
-int check_executable(const char *path);
-char * strendzap(char *str, const char *pat);
-void lt_fatal (const char *message, ...);
-
-int
-main (int argc, char *argv[])
-{
- char **newargz;
- int i;
-
- program_name = (char *) xstrdup (base_name (argv[0]));
- DEBUG("(main) argv[0] : %s\n",argv[0]);
- DEBUG("(main) program_name : %s\n",program_name);
- newargz = XMALLOC(char *, argc+2);
-EOF
-
- cat >> $cwrappersource <<EOF
- newargz[0] = (char *) xstrdup("$SHELL");
-EOF
-
- cat >> $cwrappersource <<"EOF"
- newargz[1] = find_executable(argv[0]);
- if (newargz[1] == NULL)
- lt_fatal("Couldn't find %s", argv[0]);
- DEBUG("(main) found exe at : %s\n",newargz[1]);
- /* we know the script has the same name, without the .exe */
- /* so make sure newargz[1] doesn't end in .exe */
- strendzap(newargz[1],".exe");
- for (i = 1; i < argc; i++)
- newargz[i+1] = xstrdup(argv[i]);
- newargz[argc+1] = NULL;
-
- for (i=0; i<argc+1; i++)
- {
- DEBUG("(main) newargz[%d] : %s\n",i,newargz[i]);
- ;
- }
-
-EOF
-
- case $host_os in
- mingw*)
- cat >> $cwrappersource <<EOF
- execv("$SHELL",(char const **)newargz);
-EOF
- ;;
- *)
- cat >> $cwrappersource <<EOF
- execv("$SHELL",newargz);
-EOF
- ;;
- esac
-
- cat >> $cwrappersource <<"EOF"
- return 127;
-}
-
-void *
-xmalloc (size_t num)
-{
- void * p = (void *) malloc (num);
- if (!p)
- lt_fatal ("Memory exhausted");
-
- return p;
-}
-
-char *
-xstrdup (const char *string)
-{
- return string ? strcpy ((char *) xmalloc (strlen (string) + 1), string) : NULL
-;
-}
-
-const char *
-base_name (const char *name)
-{
- const char *base;
-
-#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
- /* Skip over the disk name in MSDOS pathnames. */
- if (isalpha ((unsigned char)name[0]) && name[1] == ':')
- name += 2;
-#endif
-
- for (base = name; *name; name++)
- if (IS_DIR_SEPARATOR (*name))
- base = name + 1;
- return base;
-}
-
-int
-check_executable(const char * path)
-{
- struct stat st;
-
- DEBUG("(check_executable) : %s\n", path ? (*path ? path : "EMPTY!") : "NULL!");
- if ((!path) || (!*path))
- return 0;
-
- if ((stat (path, &st) >= 0) &&
- (
- /* MinGW & native WIN32 do not support S_IXOTH or S_IXGRP */
-#if defined (S_IXOTH)
- ((st.st_mode & S_IXOTH) == S_IXOTH) ||
-#endif
-#if defined (S_IXGRP)
- ((st.st_mode & S_IXGRP) == S_IXGRP) ||
-#endif
- ((st.st_mode & S_IXUSR) == S_IXUSR))
- )
- return 1;
- else
- return 0;
-}
-
-/* Searches for the full path of the wrapper. Returns
- newly allocated full path name if found, NULL otherwise */
-char *
-find_executable (const char* wrapper)
-{
- int has_slash = 0;
- const char* p;
- const char* p_next;
- /* static buffer for getcwd */
- char tmp[LT_PATHMAX + 1];
- int tmp_len;
- char* concat_name;
-
- DEBUG("(find_executable) : %s\n", wrapper ? (*wrapper ? wrapper : "EMPTY!") : "NULL!");
-
- if ((wrapper == NULL) || (*wrapper == '\0'))
- return NULL;
-
- /* Absolute path? */
-#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
- if (isalpha ((unsigned char)wrapper[0]) && wrapper[1] == ':')
- {
- concat_name = xstrdup (wrapper);
- if (check_executable(concat_name))
- return concat_name;
- XFREE(concat_name);
- }
- else
- {
-#endif
- if (IS_DIR_SEPARATOR (wrapper[0]))
- {
- concat_name = xstrdup (wrapper);
- if (check_executable(concat_name))
- return concat_name;
- XFREE(concat_name);
- }
-#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
- }
-#endif
-
- for (p = wrapper; *p; p++)
- if (*p == '/')
- {
- has_slash = 1;
- break;
- }
- if (!has_slash)
- {
- /* no slashes; search PATH */
- const char* path = getenv ("PATH");
- if (path != NULL)
- {
- for (p = path; *p; p = p_next)
- {
- const char* q;
- size_t p_len;
- for (q = p; *q; q++)
- if (IS_PATH_SEPARATOR(*q))
- break;
- p_len = q - p;
- p_next = (*q == '\0' ? q : q + 1);
- if (p_len == 0)
- {
- /* empty path: current directory */
- if (getcwd (tmp, LT_PATHMAX) == NULL)
- lt_fatal ("getcwd failed");
- tmp_len = strlen(tmp);
- concat_name = XMALLOC(char, tmp_len + 1 + strlen(wrapper) + 1);
- memcpy (concat_name, tmp, tmp_len);
- concat_name[tmp_len] = '/';
- strcpy (concat_name + tmp_len + 1, wrapper);
- }
- else
- {
- concat_name = XMALLOC(char, p_len + 1 + strlen(wrapper) + 1);
- memcpy (concat_name, p, p_len);
- concat_name[p_len] = '/';
- strcpy (concat_name + p_len + 1, wrapper);
- }
- if (check_executable(concat_name))
- return concat_name;
- XFREE(concat_name);
- }
- }
- /* not found in PATH; assume curdir */
- }
- /* Relative path | not found in path: prepend cwd */
- if (getcwd (tmp, LT_PATHMAX) == NULL)
- lt_fatal ("getcwd failed");
- tmp_len = strlen(tmp);
- concat_name = XMALLOC(char, tmp_len + 1 + strlen(wrapper) + 1);
- memcpy (concat_name, tmp, tmp_len);
- concat_name[tmp_len] = '/';
- strcpy (concat_name + tmp_len + 1, wrapper);
-
- if (check_executable(concat_name))
- return concat_name;
- XFREE(concat_name);
- return NULL;
-}
-
-char *
-strendzap(char *str, const char *pat)
-{
- size_t len, patlen;
-
- assert(str != NULL);
- assert(pat != NULL);
-
- len = strlen(str);
- patlen = strlen(pat);
-
- if (patlen <= len)
- {
- str += len - patlen;
- if (strcmp(str, pat) == 0)
- *str = '\0';
- }
- return str;
-}
-
-static void
-lt_error_core (int exit_status, const char * mode,
- const char * message, va_list ap)
-{
- fprintf (stderr, "%s: %s: ", program_name, mode);
- vfprintf (stderr, message, ap);
- fprintf (stderr, ".\n");
-
- if (exit_status >= 0)
- exit (exit_status);
-}
-
-void
-lt_fatal (const char *message, ...)
-{
- va_list ap;
- va_start (ap, message);
- lt_error_core (EXIT_FAILURE, "FATAL", message, ap);
- va_end (ap);
-}
-EOF
- # we should really use a build-platform specific compiler
- # here, but OTOH, the wrappers (shell script and this C one)
- # are only useful if you want to execute the "real" binary.
- # Since the "real" binary is built for $host, then this
- # wrapper might as well be built for $host, too.
- $opt_dry_run || $LTCC $LTCFLAGS -s -o $cwrapper $cwrappersource
+ # Now, create the wrapper script for func_source use:
+ func_ltwrapper_scriptname $cwrapper
+ $RM $func_ltwrapper_scriptname_result
+ trap "$RM $func_ltwrapper_scriptname_result; exit $EXIT_FAILURE" 1 2 15
+ $opt_dry_run || {
+ # note: this script will not be executed, so do not chmod.
+ if test "x$build" = "x$host" ; then
+ $cwrapper --lt-dump-script > $func_ltwrapper_scriptname_result
+ else
+ func_emit_wrapper no > $func_ltwrapper_scriptname_result
+ fi
+ }
;;
- esac
- $RM $output
- trap "$RM $output; exit $EXIT_FAILURE" 1 2 15
+ * )
+ $RM $output
+ trap "$RM $output; exit $EXIT_FAILURE" 1 2 15
- $ECHO > $output "\
-#! $SHELL
-
-# $output - temporary wrapper script for $objdir/$outputname
-# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
-#
-# The $output program cannot be directly executed until all the libtool
-# libraries that it depends on are installed.
-#
-# This wrapper script should never be moved out of the build directory.
-# If it is, it will not operate correctly.
-
-# Sed substitution that helps us do robust quoting. It backslashifies
-# metacharacters that are still active within double-quoted strings.
-Xsed='${SED} -e 1s/^X//'
-sed_quote_subst='$sed_quote_subst'
-
-# Be Bourne compatible
-if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then
- emulate sh
- NULLCMD=:
- # Zsh 3.x and 4.x performs word splitting on \${1+\"\$@\"}, which
- # is contrary to our usage. Disable this feature.
- alias -g '\${1+\"\$@\"}'='\"\$@\"'
- setopt NO_GLOB_SUBST
-else
- case \`(set -o) 2>/dev/null\` in *posix*) set -o posix;; esac
-fi
-BIN_SH=xpg4; export BIN_SH # for Tru64
-DUALCASE=1; export DUALCASE # for MKS sh
-
-# The HP-UX ksh and POSIX shell print the target directory to stdout
-# if CDPATH is set.
-(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
-
-relink_command=\"$relink_command\"
-
-# This environment variable determines our operation mode.
-if test \"\$libtool_install_magic\" = \"$magic\"; then
- # install mode needs the following variables:
- generated_by_libtool_version='$macro_version'
- notinst_deplibs='$notinst_deplibs'
-else
- # When we are sourced in execute mode, \$file and \$ECHO are already set.
- if test \"\$libtool_execute_magic\" != \"$magic\"; then
- ECHO=\"$qecho\"
- file=\"\$0\"
- # Make sure echo works.
- if test \"X\$1\" = X--no-reexec; then
- # Discard the --no-reexec flag, and continue.
- shift
- elif test \"X\`{ \$ECHO '\t'; } 2>/dev/null\`\" = 'X\t'; then
- # Yippee, \$ECHO works!
- :
- else
- # Restart under the correct shell, and then maybe \$ECHO will work.
- exec $SHELL \"\$0\" --no-reexec \${1+\"\$@\"}
- fi
- fi\
-"
- $ECHO >> $output "\
-
- # Find the directory that this script lives in.
- thisdir=\`\$ECHO \"X\$file\" | \$Xsed -e 's%/[^/]*$%%'\`
- test \"x\$thisdir\" = \"x\$file\" && thisdir=.
-
- # Follow symbolic links until we get to the real thisdir.
- file=\`ls -ld \"\$file\" | ${SED} -n 's/.*-> //p'\`
- while test -n \"\$file\"; do
- destdir=\`\$ECHO \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\`
-
- # If there was a directory component, then change thisdir.
- if test \"x\$destdir\" != \"x\$file\"; then
- case \"\$destdir\" in
- [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;;
- *) thisdir=\"\$thisdir/\$destdir\" ;;
- esac
- fi
-
- file=\`\$ECHO \"X\$file\" | \$Xsed -e 's%^.*/%%'\`
- file=\`ls -ld \"\$thisdir/\$file\" | ${SED} -n 's/.*-> //p'\`
- done
-
- # Try to get the absolute directory name.
- absdir=\`cd \"\$thisdir\" && pwd\`
- test -n \"\$absdir\" && thisdir=\"\$absdir\"
-"
-
- if test "$fast_install" = yes; then
- $ECHO >> $output "\
- program=lt-'$outputname'$exeext
- progdir=\"\$thisdir/$objdir\"
-
- if test ! -f \"\$progdir/\$program\" ||
- { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\
- test \"X\$file\" != \"X\$progdir/\$program\"; }; then
-
- file=\"\$\$-\$program\"
-
- if test ! -d \"\$progdir\"; then
- $MKDIR \"\$progdir\"
- else
- $RM \"\$progdir/\$file\"
- fi"
-
- $ECHO >> $output "\
-
- # relink executable if necessary
- if test -n \"\$relink_command\"; then
- if relink_command_output=\`eval \$relink_command 2>&1\`; then :
- else
- $ECHO \"\$relink_command_output\" >&2
- $RM \"\$progdir/\$file\"
- exit 1
- fi
- fi
-
- $MV \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null ||
- { $RM \"\$progdir/\$program\";
- $MV \"\$progdir/\$file\" \"\$progdir/\$program\"; }
- $RM \"\$progdir/\$file\"
- fi"
- else
- $ECHO >> $output "\
- program='$outputname'
- progdir=\"\$thisdir/$objdir\"
-"
- fi
-
- $ECHO >> $output "\
-
- if test -f \"\$progdir/\$program\"; then"
-
- # Export our shlibpath_var if we have one.
- if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
- $ECHO >> $output "\
- # Add our own library path to $shlibpath_var
- $shlibpath_var=\"$temp_rpath\$$shlibpath_var\"
-
- # Some systems cannot cope with colon-terminated $shlibpath_var
- # The second colon is a workaround for a bug in BeOS R4 sed
- $shlibpath_var=\`\$ECHO \"X\$$shlibpath_var\" | \$Xsed -e 's/::*\$//'\`
-
- export $shlibpath_var
-"
- fi
-
- # fixup the dll searchpath if we need to.
- if test -n "$dllsearchpath"; then
- $ECHO >> $output "\
- # Add the dll search path components to the executable PATH
- PATH=$dllsearchpath:\$PATH
-"
- fi
-
- $ECHO >> $output "\
- if test \"\$libtool_execute_magic\" != \"$magic\"; then
- # Run the actual program with our arguments.
-"
- case $host in
- # Backslashes separate directories on plain windows
- *-*-mingw | *-*-os2*)
- $ECHO >> $output "\
- exec \"\$progdir\\\\\$program\" \${1+\"\$@\"}
-"
+ func_emit_wrapper no > $output
+ chmod +x $output
;;
-
- *)
- $ECHO >> $output "\
- exec \"\$progdir/\$program\" \${1+\"\$@\"}
-"
- ;;
esac
- $ECHO >> $output "\
- \$ECHO \"\$0: cannot exec \$program \$*\"
- exit 1
- fi
- else
- # The program doesn't exist.
- \$ECHO \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2
- \$ECHO \"This script is just a wrapper for \$program.\" 1>&2
- $ECHO \"See the $PACKAGE documentation for more information.\" 1>&2
- exit 1
- fi
-fi\
-"
- chmod +x $output
}
exit $EXIT_SUCCESS
;;
@@ -6940,7 +7932,8 @@
# Make sure we don't pick an alternate name that also
# overlaps.
newobj=lt$counter-$objbase
- counter=`expr $counter + 1`
+ func_arith $counter + 1
+ counter=$func_arith_result
case " $oldobjs " in
*[\ /]"$newobj "*) ;;
*) if test ! -f "$gentop/$newobj"; then break; fi ;;
@@ -6955,29 +7948,35 @@
fi
eval cmds=\"$old_archive_cmds\"
- if len=`expr "X$cmds" : ".*" 2>/dev/null` &&
- test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then
+ func_len " $cmds"
+ len=$func_len_result
+ if test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then
cmds=$old_archive_cmds
else
# the command line is too long to link in one step, link in parts
- func_echo "using piecewise archive linking..."
+ func_verbose "using piecewise archive linking..."
save_RANLIB=$RANLIB
RANLIB=:
objlist=
concat_cmds=
save_oldobjs=$oldobjs
+ oldobjs=
# Is there a better way of finding the last object in the list?
for obj in $save_oldobjs
do
last_oldobj=$obj
done
+ eval test_cmds=\"$old_archive_cmds\"
+ func_len " $test_cmds"
+ len0=$func_len_result
+ len=$len0
for obj in $save_oldobjs
do
- oldobjs="$objlist $obj"
- objlist="$objlist $obj"
- eval test_cmds=\"$old_archive_cmds\"
- if len=`expr "X$test_cmds" : ".*" 2>/dev/null` &&
- test "$len" -le "$max_cmd_len"; then
+ func_len " $obj"
+ func_arith $len + $func_len_result
+ len=$func_arith_result
+ func_append objlist " $obj"
+ if test "$len" -lt "$max_cmd_len"; then
:
else
# the above command should be used before it gets too long
@@ -6988,6 +7987,7 @@
test -z "$concat_cmds" || concat_cmds=$concat_cmds~
eval concat_cmds=\"\${concat_cmds}$old_archive_cmds\"
objlist=
+ len=$len0
fi
done
RANLIB=$save_RANLIB
@@ -7010,7 +8010,7 @@
*.la)
old_library=
test "$build_old_libs" = yes && old_library="$libname.$libext"
- func_echo "creating $output"
+ func_verbose "creating $output"
# Preserve any variables that may affect compiler behavior
for var in $variables_saved_for_relink; do
@@ -7112,7 +8112,7 @@
# place dlname in correct position for cygwin
tdlname=$dlname
case $host,$output,$installed,$module,$dlname in
- *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll) tdlname=../bin/$dlname ;;
+ *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll | *cegcc*,*lai,yes,no,*.dll) tdlname=../bin/$dlname ;;
esac
$ECHO > $output "\
# $outputname - a libtool library file
@@ -7311,8 +8311,15 @@
esac
# Do a test to see if this is a libtool program.
if func_ltwrapper_p "$file"; then
- relink_command=
- func_source $dir/$noexename
+ if func_ltwrapper_executable_p "$file"; then
+ func_ltwrapper_scriptname "$file"
+ relink_command=
+ func_source $func_ltwrapper_scriptname_result
+ rmfiles="$rmfiles $func_ltwrapper_scriptname_result"
+ else
+ relink_command=
+ func_source $dir/$noexename
+ fi
# note $name still contains .exe if it was in $file originally
# as does the version of $file that was added into $rmfiles
@@ -7386,4 +8393,3 @@
# End:
# vi:sw=2
-
Index: ltsugar.m4
===================================================================
--- ltsugar.m4 (revision 139370)
+++ ltsugar.m4 (working copy)
@@ -1,13 +1,13 @@
# ltsugar.m4 -- libtool m4 base layer. -*-Autoconf-*-
#
-# Copyright (C) 2004, 2005, 2007 Free Software Foundation, Inc.
-# Written by Gary V. Vaughan.
+# Copyright (C) 2004, 2005, 2007, 2008 Free Software Foundation, Inc.
+# Written by Gary V. Vaughan, 2004
#
# This file is free software; the Free Software Foundation gives
# unlimited permission to copy and/or distribute it, with or without
# modifications, as long as this notice is preserved.
-# serial 4 ltsugar.m4
+# serial 6 ltsugar.m4
# This is to help aclocal find these macros, as it can't see m4_define.
AC_DEFUN([LTSUGAR_VERSION], [m4_if([0.1])])
@@ -17,19 +17,15 @@
# -----------------------------
# Produce ARG1SEPARG2...SEPARGn, omitting [] arguments and their
# associated separator.
+# Needed until we can rely on m4_join from Autoconf 2.62, since all earlier
+# versions in m4sugar had bugs.
m4_define([lt_join],
-[m4_case([$#],
- [0], [m4_fatal([$0: too few arguments: $#])],
- [1], [],
- [2], [[$2]],
- [m4_ifval([$2],
- [[$2][]m4_foreach(_lt_Arg, lt_car([m4_shiftn(2, $@)]),
- [_$0([$1], _lt_Arg)])],
- [$0([$1], m4_shiftn(2, $@))])])[]dnl
-])
+[m4_if([$#], [1], [],
+ [$#], [2], [[$2]],
+ [m4_if([$2], [], [], [[$2]_])$0([$1], m4_shift(m4_shift($@)))])])
m4_define([_lt_join],
-[m4_ifval([$2],[$1][$2])[]dnl
-])
+[m4_if([$#$2], [2], [],
+ [m4_if([$2], [], [], [[$1$2]])$0([$1], m4_shift(m4_shift($@)))])])
# lt_car(LIST)
@@ -49,11 +45,13 @@
# lt_append(MACRO-NAME, STRING, [SEPARATOR])
# ------------------------------------------
# Redefine MACRO-NAME to hold its former content plus `SEPARATOR'`STRING'.
-# Note that neither SEPARATOR nor STRING are expanded. No SEPARATOR is
-# output if MACRO-NAME was previously undefined (different than defined
-# and empty).
+# Note that neither SEPARATOR nor STRING are expanded; they are appended
+# to MACRO-NAME as is (leaving the expansion for when MACRO-NAME is invoked).
+# No SEPARATOR is output if MACRO-NAME was previously undefined (different
+# than defined and empty).
+#
# This macro is needed until we can rely on Autoconf 2.62, since earlier
-# versions of m4 mistakenly expanded SEPARATOR.
+# versions of m4sugar mistakenly expanded SEPARATOR but not STRING.
m4_define([lt_append],
[m4_define([$1],
m4_ifdef([$1], [m4_defn([$1])[$3]])[$2])])
@@ -65,14 +63,14 @@
# Produce a SEP delimited list of all paired combinations of elements of
# PREFIX-LIST with SUFFIX1 through SUFFIXn. Each element of the list
# has the form PREFIXmINFIXSUFFIXn.
+# Needed until we can rely on m4_combine added in Autoconf 2.62.
m4_define([lt_combine],
-[m4_if([$2], [], [],
- [m4_if([$4], [], [],
- [lt_join(m4_quote(m4_default([$1], [[, ]])),
- lt_unquote(m4_split(m4_normalize(m4_foreach(_Lt_prefix, [$2],
- [m4_foreach(_Lt_suffix, lt_car([m4_shiftn(3, $@)]),
- [_Lt_prefix[]$3[]_Lt_suffix ])])))))])])dnl
-])
+[m4_if(m4_eval([$# > 3]), [1],
+ [m4_pushdef([_Lt_sep], [m4_define([_Lt_sep], m4_defn([lt_car]))])]]dnl
+[[m4_foreach([_Lt_prefix], [$2],
+ [m4_foreach([_Lt_suffix],
+ ]m4_dquote(m4_dquote(m4_shift(m4_shift(m4_shift($@)))))[,
+ [_Lt_sep([$1])[]m4_defn([_Lt_prefix])[$3]m4_defn([_Lt_suffix])])])])])
# lt_if_append_uniq(MACRO-NAME, VARNAME, [SEPARATOR], [UNIQ], [NOT-UNIQ])
@@ -84,13 +82,13 @@
[m4_if(m4_index([$3]m4_defn([$1])[$3], [$3$2$3]), [-1],
[lt_append([$1], [$2], [$3])$4],
[$5])],
- [lt_append([$1], [$2], [$3])$4])])
+ [lt_append([$1], [$2], [$3])$4])])
# lt_dict_add(DICT, KEY, VALUE)
# -----------------------------
m4_define([lt_dict_add],
-[m4_define([$1($2)], [$4])])
+[m4_define([$1($2)], [$3])])
# lt_dict_add_subkey(DICT, KEY, SUBKEY, VALUE)
Index: ltversion.m4
===================================================================
--- ltversion.m4 (revision 139370)
+++ ltversion.m4 (working copy)
@@ -1,23 +1,23 @@
# ltversion.m4 -- version numbers -*- Autoconf -*-
#
-# Copyright (C) 2004 Free Software Foundation, Inc.
-# Written by Scott James Remnant.
+# Copyright (C) 2004 Free Software Foundation, Inc.
+# Written by Scott James Remnant, 2004
#
-## This file is free software; the Free Software Foundation gives
+# This file is free software; the Free Software Foundation gives
# unlimited permission to copy and/or distribute it, with or without
# modifications, as long as this notice is preserved.
-# Generated from ltversion.in; do not edit by hand
+# Generated from ltversion.in.
-# serial 2435 ltversion.m4
+# serial 3002 ltversion.m4
# This file is part of GNU Libtool
-m4_define([LT_PACKAGE_VERSION], [2.1a])
-m4_define([LT_PACKAGE_REVISION], [1.2435])
+m4_define([LT_PACKAGE_VERSION], [2.2.5a])
+m4_define([LT_PACKAGE_REVISION], [1.3002])
AC_DEFUN([LTVERSION_VERSION],
-[macro_version='2.1a'
-macro_revision='1.2435'
+[macro_version='2.2.5a'
+macro_revision='1.3002'
_LT_DECL(, macro_version, 0, [Which release of libtool.m4 was used?])
_LT_DECL(, macro_revision, 0)
])
Index: ltoptions.m4
===================================================================
--- ltoptions.m4 (revision 139370)
+++ ltoptions.m4 (working copy)
@@ -1,82 +1,87 @@
# Helper functions for option handling. -*- Autoconf -*-
-
-# Copyright (C) 2004, 2005 Free Software Foundation, Inc.
-# Written by Gary V. Vaughan <gary@gnu.org>
#
+# Copyright (C) 2004, 2005, 2007, 2008 Free Software Foundation, Inc.
+# Written by Gary V. Vaughan, 2004
+#
# This file is free software; the Free Software Foundation gives
# unlimited permission to copy and/or distribute it, with or without
# modifications, as long as this notice is preserved.
-# serial 3 ltoptions.m4
+# serial 6 ltoptions.m4
# This is to help aclocal find these macros, as it can't see m4_define.
AC_DEFUN([LTOPTIONS_VERSION], [m4_if([1])])
-# _LT_MANGLE_OPTION(NAME)
-# -----------------------
+# _LT_MANGLE_OPTION(MACRO-NAME, OPTION-NAME)
+# ------------------------------------------
m4_define([_LT_MANGLE_OPTION],
-[[_LT_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])])
+[[_LT_OPTION_]m4_bpatsubst($1__$2, [[^a-zA-Z0-9_]], [_])])
-# _LT_SET_OPTION(NAME)
-# --------------------
-# Set option NAME, and if there is a matching handler defined,
-# dispatch to it. Other NAMEs are saved as a flag.
+# _LT_SET_OPTION(MACRO-NAME, OPTION-NAME)
+# ---------------------------------------
+# Set option OPTION-NAME for macro MACRO-NAME, and if there is a
+# matching handler defined, dispatch to it. Other OPTION-NAMEs are
+# saved as a flag.
m4_define([_LT_SET_OPTION],
-[m4_define(_LT_MANGLE_OPTION([$1]))dnl
-m4_ifdef(_LT_MANGLE_DEFUN([$1]),
- _LT_MANGLE_DEFUN([$1]),
- [m4_warning([Unknown Libtool option `$1'])])[]dnl
+[m4_define(_LT_MANGLE_OPTION([$1], [$2]))dnl
+m4_ifdef(_LT_MANGLE_DEFUN([$1], [$2]),
+ _LT_MANGLE_DEFUN([$1], [$2]),
+ [m4_warning([Unknown $1 option `$2'])])[]dnl
])
-# _LT_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET])
-# -------------------------------------------
+# _LT_IF_OPTION(MACRO-NAME, OPTION-NAME, IF-SET, [IF-NOT-SET])
+# ------------------------------------------------------------
# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise.
m4_define([_LT_IF_OPTION],
-[m4_ifdef(_LT_MANGLE_OPTION([$1]), [$2], [$3])])
+[m4_ifdef(_LT_MANGLE_OPTION([$1], [$2]), [$3], [$4])])
-# _LT_UNLESS_OPTIONS(OPTIONS, IF-NOT-SET)
-# ---------------------------------------
-# Execute IF-NOT-SET if all OPTIONS are not set.
+# _LT_UNLESS_OPTIONS(MACRO-NAME, OPTION-LIST, IF-NOT-SET)
+# -------------------------------------------------------
+# Execute IF-NOT-SET unless all options in OPTION-LIST for MACRO-NAME
+# are set.
m4_define([_LT_UNLESS_OPTIONS],
-[m4_foreach([_LT_Option], m4_split(m4_normalize([$1])),
- [m4_ifdef(_LT_MANGLE_OPTION(_LT_Option),
+[m4_foreach([_LT_Option], m4_split(m4_normalize([$2])),
+ [m4_ifdef(_LT_MANGLE_OPTION([$1], _LT_Option),
[m4_define([$0_found])])])[]dnl
-m4_ifdef([$0_found], [m4_undefine([$0_found])], [$2
+m4_ifdef([$0_found], [m4_undefine([$0_found])], [$3
])[]dnl
])
-# _LT_SET_OPTIONS(OPTIONS)
-# ------------------------
-# OPTIONS is a space-separated list of Libtool options.
-# If any OPTION has a handler macro declared with LT_OPTION_DEFINE,
-# dispatch to that macro; otherwise complain about the unknown option
-# and exit.
+# _LT_SET_OPTIONS(MACRO-NAME, OPTION-LIST)
+# ----------------------------------------
+# OPTION-LIST is a space-separated list of Libtool options associated
+# with MACRO-NAME. If any OPTION has a matching handler declared with
+# LT_OPTION_DEFINE, dispatch to that macro; otherwise complain about
+# the unknown option and exit.
m4_defun([_LT_SET_OPTIONS],
[# Set options
-m4_foreach([_LT_Option], m4_split(m4_normalize([$1])),
- [_LT_SET_OPTION(_LT_Option)])
-dnl
-dnl Simply set some default values (i.e off) if boolean options were not
-dnl specified:
-_LT_UNLESS_OPTIONS([dlopen], [enable_dlopen=no
-])
-_LT_UNLESS_OPTIONS([win32-dll], [enable_win32_dll=no
-])
-dnl
-dnl If no reference was made to various pairs of opposing options, then
-dnl we run the default mode handler for the pair. For example, if neither
-dnl `shared' nor `disable-shared' was passed, we enable building of shared
-dnl archives by default:
-_LT_UNLESS_OPTIONS([shared disable-shared], [_LT_ENABLE_SHARED])
-_LT_UNLESS_OPTIONS([static disable-static], [_LT_ENABLE_STATIC])
-_LT_UNLESS_OPTIONS([pic-only no-pic], [_LT_WITH_PIC])
-_LT_UNLESS_OPTIONS([fast-install disable-fast-install],
- [_LT_ENABLE_FAST_INSTALL])
+m4_foreach([_LT_Option], m4_split(m4_normalize([$2])),
+ [_LT_SET_OPTION([$1], _LT_Option)])
+
+m4_if([$1],[LT_INIT],[
+ dnl
+ dnl Simply set some default values (i.e off) if boolean options were not
+ dnl specified:
+ _LT_UNLESS_OPTIONS([LT_INIT], [dlopen], [enable_dlopen=no
+ ])
+ _LT_UNLESS_OPTIONS([LT_INIT], [win32-dll], [enable_win32_dll=no
+ ])
+ dnl
+ dnl If no reference was made to various pairs of opposing options, then
+ dnl we run the default mode handler for the pair. For example, if neither
+ dnl `shared' nor `disable-shared' was passed, we enable building of shared
+ dnl archives by default:
+ _LT_UNLESS_OPTIONS([LT_INIT], [shared disable-shared], [_LT_ENABLE_SHARED])
+ _LT_UNLESS_OPTIONS([LT_INIT], [static disable-static], [_LT_ENABLE_STATIC])
+ _LT_UNLESS_OPTIONS([LT_INIT], [pic-only no-pic], [_LT_WITH_PIC])
+ _LT_UNLESS_OPTIONS([LT_INIT], [fast-install disable-fast-install],
+ [_LT_ENABLE_FAST_INSTALL])
+ ])
])# _LT_SET_OPTIONS
@@ -84,24 +89,26 @@
## Macros to handle LT_INIT options. ##
## --------------------------------- ##
+# _LT_MANGLE_DEFUN(MACRO-NAME, OPTION-NAME)
+# -----------------------------------------
m4_define([_LT_MANGLE_DEFUN],
-[[_LT_OPTION_DEFUN_]m4_bpatsubst(m4_toupper([$1]), [[^A-Z0-9_]], [_])])
+[[_LT_OPTION_DEFUN_]m4_bpatsubst(m4_toupper([$1__$2]), [[^A-Z0-9_]], [_])])
-# LT_OPTION_DEFINE(NAME, CODE)
-# ----------------------------
+# LT_OPTION_DEFINE(MACRO-NAME, OPTION-NAME, CODE)
+# -----------------------------------------------
m4_define([LT_OPTION_DEFINE],
-[m4_define(_LT_MANGLE_DEFUN([$1]), [$2])[]dnl
+[m4_define(_LT_MANGLE_DEFUN([$1], [$2]), [$3])[]dnl
])# LT_OPTION_DEFINE
# dlopen
# ------
-LT_OPTION_DEFINE([dlopen], [enable_dlopen=yes
+LT_OPTION_DEFINE([LT_INIT], [dlopen], [enable_dlopen=yes
])
AU_DEFUN([AC_LIBTOOL_DLOPEN],
-[_LT_SET_OPTION([dlopen])
+[_LT_SET_OPTION([LT_INIT], [dlopen])
AC_DIAGNOSE([obsolete],
[$0: Remove this warning and the call to _LT_SET_OPTION when you
put the `dlopen' option into LT_INIT's first parameter.])
@@ -114,11 +121,11 @@
# win32-dll
# ---------
# Declare package support for building win32 dll's.
-LT_OPTION_DEFINE([win32-dll],
+LT_OPTION_DEFINE([LT_INIT], [win32-dll],
[enable_win32_dll=yes
case $host in
-*-*-cygwin* | *-*-mingw* | *-*-pw32*)
+*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-cegcc*)
AC_CHECK_TOOL(AS, as, false)
AC_CHECK_TOOL(DLLTOOL, dlltool, false)
AC_CHECK_TOOL(OBJDUMP, objdump, false)
@@ -136,7 +143,8 @@
])# win32-dll
AU_DEFUN([AC_LIBTOOL_WIN32_DLL],
-[_LT_SET_OPTION([win32-dll])
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+_LT_SET_OPTION([LT_INIT], [win32-dll])
AC_DIAGNOSE([obsolete],
[$0: Remove this warning and the call to _LT_SET_OPTION when you
put the `win32-dll' option into LT_INIT's first parameter.])
@@ -179,16 +187,16 @@
[Whether or not to build shared libraries])
])# _LT_ENABLE_SHARED
-LT_OPTION_DEFINE([shared], [_LT_ENABLE_SHARED([yes])])
-LT_OPTION_DEFINE([disable-shared], [_LT_ENABLE_SHARED([no])])
+LT_OPTION_DEFINE([LT_INIT], [shared], [_LT_ENABLE_SHARED([yes])])
+LT_OPTION_DEFINE([LT_INIT], [disable-shared], [_LT_ENABLE_SHARED([no])])
# Old names:
AC_DEFUN([AC_ENABLE_SHARED],
-[_LT_SET_OPTION([shared])
+[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[shared])
])
AC_DEFUN([AC_DISABLE_SHARED],
-[_LT_SET_OPTION([disable-shared])
+[_LT_SET_OPTION([LT_INIT], [disable-shared])
])
AU_DEFUN([AM_ENABLE_SHARED], [AC_ENABLE_SHARED($@)])
@@ -233,16 +241,16 @@
[Whether or not to build static libraries])
])# _LT_ENABLE_STATIC
-LT_OPTION_DEFINE([static], [_LT_ENABLE_STATIC([yes])])
-LT_OPTION_DEFINE([disable-static], [_LT_ENABLE_STATIC([no])])
+LT_OPTION_DEFINE([LT_INIT], [static], [_LT_ENABLE_STATIC([yes])])
+LT_OPTION_DEFINE([LT_INIT], [disable-static], [_LT_ENABLE_STATIC([no])])
# Old names:
AC_DEFUN([AC_ENABLE_STATIC],
-[_LT_SET_OPTION([static])
+[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[static])
])
AC_DEFUN([AC_DISABLE_STATIC],
-[_LT_SET_OPTION([disable-static])
+[_LT_SET_OPTION([LT_INIT], [disable-static])
])
AU_DEFUN([AM_ENABLE_STATIC], [AC_ENABLE_STATIC($@)])
@@ -287,19 +295,19 @@
[Whether or not to optimize for fast installation])dnl
])# _LT_ENABLE_FAST_INSTALL
-LT_OPTION_DEFINE([fast-install], [_LT_ENABLE_FAST_INSTALL([yes])])
-LT_OPTION_DEFINE([disable-fast-install], [_LT_ENABLE_FAST_INSTALL([no])])
+LT_OPTION_DEFINE([LT_INIT], [fast-install], [_LT_ENABLE_FAST_INSTALL([yes])])
+LT_OPTION_DEFINE([LT_INIT], [disable-fast-install], [_LT_ENABLE_FAST_INSTALL([no])])
# Old names:
AU_DEFUN([AC_ENABLE_FAST_INSTALL],
-[_LT_SET_OPTION([fast-install])
+[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[fast-install])
AC_DIAGNOSE([obsolete],
[$0: Remove this warning and the call to _LT_SET_OPTION when you put
the `fast-install' option into LT_INIT's first parameter.])
])
AU_DEFUN([AC_DISABLE_FAST_INSTALL],
-[_LT_SET_OPTION([disable-fast-install])
+[_LT_SET_OPTION([LT_INIT], [disable-fast-install])
AC_DIAGNOSE([obsolete],
[$0: Remove this warning and the call to _LT_SET_OPTION when you put
the `disable-fast-install' option into LT_INIT's first parameter.])
@@ -327,12 +335,12 @@
_LT_DECL([], [pic_mode], [0], [What type of objects to build])dnl
])# _LT_WITH_PIC
-LT_OPTION_DEFINE([pic-only], [_LT_WITH_PIC([yes])])
-LT_OPTION_DEFINE([no-pic], [_LT_WITH_PIC([no])])
+LT_OPTION_DEFINE([LT_INIT], [pic-only], [_LT_WITH_PIC([yes])])
+LT_OPTION_DEFINE([LT_INIT], [no-pic], [_LT_WITH_PIC([no])])
# Old name:
AU_DEFUN([AC_LIBTOOL_PICMODE],
-[_LT_SET_OPTION([pic-only])
+[_LT_SET_OPTION([LT_INIT], [pic-only])
AC_DIAGNOSE([obsolete],
[$0: Remove this warning and the call to _LT_SET_OPTION when you
put the `pic-only' option into LT_INIT's first parameter.])
@@ -340,3 +348,21 @@
dnl aclocal-1.4 backwards compatibility:
dnl AC_DEFUN([AC_LIBTOOL_PICMODE], [])
+
+## ----------------- ##
+## LTDL_INIT Options ##
+## ----------------- ##
+
+m4_define([_LTDL_MODE], [])
+LT_OPTION_DEFINE([LTDL_INIT], [nonrecursive],
+ [m4_define([_LTDL_MODE], [nonrecursive])])
+LT_OPTION_DEFINE([LTDL_INIT], [recursive],
+ [m4_define([_LTDL_MODE], [recursive])])
+LT_OPTION_DEFINE([LTDL_INIT], [subproject],
+ [m4_define([_LTDL_MODE], [subproject])])
+
+m4_define([_LTDL_TYPE], [])
+LT_OPTION_DEFINE([LTDL_INIT], [installable],
+ [m4_define([_LTDL_TYPE], [installable])])
+LT_OPTION_DEFINE([LTDL_INIT], [convenience],
+ [m4_define([_LTDL_TYPE], [convenience])])
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [PATCH] Update libtool to latest git tip
2008-08-21 6:03 ` [PATCH] Update libtool to latest git tip (was: Re: Update libtool?) Peter O'Gorman
@ 2008-08-21 14:55 ` Paolo Bonzini
2008-08-21 21:14 ` Peter O'Gorman
2008-09-08 18:31 ` Peter O'Gorman
0 siblings, 2 replies; 21+ messages in thread
From: Paolo Bonzini @ 2008-08-21 14:55 UTC (permalink / raw)
To: Peter O'Gorman; +Cc: gcc-patches, gcc
Peter O'Gorman wrote:
> On Mon, Aug 11, 2008 at 03:02:05PM -0500, Peter O'Gorman wrote:
>> Yes, I tried it also -
>> http://pogma.com/misc/gcc-libtool-git20080810.patch (Slight change to
>> ltgcc.m4, otherwise git libtool + generated files).
>>
>> I plan on testing more widely next weekend and proposing a patch the
>> following week, regardless of whether libtool-2.2.6 is released. (Unless
>> Ralph would prefer to do it?)
>>
>
> Hi,
> Does not look much like there will be a libtool 2.2.6 release this month.
Why? Regressions, or just no time?
Actual approval depends on your answer to this question, but the patch
is technically okay. Can you commit it to the src repository too?
There is some regeneration to do there too.
Paolo
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [PATCH] Update libtool to latest git tip
2008-08-21 14:55 ` [PATCH] Update libtool to latest git tip Paolo Bonzini
@ 2008-08-21 21:14 ` Peter O'Gorman
2008-08-25 17:26 ` Peter O'Gorman
2008-09-08 18:31 ` Peter O'Gorman
1 sibling, 1 reply; 21+ messages in thread
From: Peter O'Gorman @ 2008-08-21 21:14 UTC (permalink / raw)
To: Paolo Bonzini; +Cc: gcc-patches
On Thu, Aug 21, 2008 at 04:29:26PM +0200, Paolo Bonzini wrote:
>> Does not look much like there will be a libtool 2.2.6 release this month.
>
> Why? Regressions, or just no time?
Lack of time, small problem with libltdl, nothing that would affect gcc.
Anyway, let's wait on this a few days, just in case a libtool release
happens over the weekend :)
>
> Actual approval depends on your answer to this question, but the patch is
> technically okay. Can you commit it to the src repository too? There is
> some regeneration to do there too.
I don't think I have write access to the src repository.
Peter
--
Peter O'Gorman
pogma@thewrittenword.com
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [PATCH] Update libtool to latest git tip
2008-08-21 21:14 ` Peter O'Gorman
@ 2008-08-25 17:26 ` Peter O'Gorman
0 siblings, 0 replies; 21+ messages in thread
From: Peter O'Gorman @ 2008-08-25 17:26 UTC (permalink / raw)
To: Paolo Bonzini; +Cc: gcc-patches
On Thu, Aug 21, 2008 at 03:42:35PM -0500, Peter O'Gorman wrote:
> On Thu, Aug 21, 2008 at 04:29:26PM +0200, Paolo Bonzini wrote:
> >> Does not look much like there will be a libtool 2.2.6 release this month.
> >
> > Why? Regressions, or just no time?
>
> Lack of time, small problem with libltdl, nothing that would affect gcc.
> Anyway, let's wait on this a few days, just in case a libtool release
> happens over the weekend :)
Turns out that enjoying the weekend and releasing libtool are mutually
exclusive activities. I had a good weekend :)
> >
> > Actual approval depends on your answer to this question, but the patch is
> > technically okay. Can you commit it to the src repository too? There is
> > some regeneration to do there too.
>
> I don't think I have write access to the src repository.
At this rate, stage 1 will be over before libtool-2.2.6 is released. It
is, however, in a releasable state.
Peter
--
Peter O'Gorman
pogma@thewrittenword.com
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [PATCH] Update libtool to latest git tip
2008-08-21 14:55 ` [PATCH] Update libtool to latest git tip Paolo Bonzini
2008-08-21 21:14 ` Peter O'Gorman
@ 2008-09-08 18:31 ` Peter O'Gorman
2008-09-08 19:09 ` Paolo Bonzini
1 sibling, 1 reply; 21+ messages in thread
From: Peter O'Gorman @ 2008-09-08 18:31 UTC (permalink / raw)
To: Paolo Bonzini; +Cc: gcc-patches, gcc
Hi Paolo,
On Thu, Aug 21, 2008 at 04:29:26PM +0200, Paolo Bonzini wrote:
> Peter O'Gorman wrote:
>> On Mon, Aug 11, 2008 at 03:02:05PM -0500, Peter O'Gorman wrote:
>>> Yes, I tried it also -
>>> http://pogma.com/misc/gcc-libtool-git20080810.patch (Slight change to
>>> ltgcc.m4, otherwise git libtool + generated files).
>>>
>>> I plan on testing more widely next weekend and proposing a patch the
>>> following week, regardless of whether libtool-2.2.6 is released. (Unless
>>> Ralph would prefer to do it?)
>>>
>>
>> Hi,
>> Does not look much like there will be a libtool 2.2.6 release this month.
>
> Why? Regressions, or just no time?
Well, libtool-2.2.6 is finally released (twice even).
>
> Actual approval depends on your answer to this question, but the patch is
> technically okay. Can you commit it to the src repository too? There is
> some regeneration to do there too.
I know that GCC is now in stage 3, and that we missed the end of stage 1
by a week, but I would still like to update gcc's libtool to 2.2.6.
Peter
--
Peter O'Gorman
pogma@thewrittenword.com
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [PATCH] Update libtool to latest git tip
2008-09-08 18:31 ` Peter O'Gorman
@ 2008-09-08 19:09 ` Paolo Bonzini
2008-09-08 19:16 ` Peter O'Gorman
0 siblings, 1 reply; 21+ messages in thread
From: Paolo Bonzini @ 2008-09-08 19:09 UTC (permalink / raw)
To: Peter O'Gorman; +Cc: gcc-patches, gcc
> Well, libtool-2.2.6 is finally released (twice even).
>
>> Actual approval depends on your answer to this question, but the patch is
>> technically okay. Can you commit it to the src repository too? There is
>> some regeneration to do there too.
>
> I know that GCC is now in stage 3, and that we missed the end of stage 1
> by a week, but I would still like to update gcc's libtool to 2.2.6.
It fixed a Darwin bug, right?
Paolo
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [PATCH] Update libtool to latest git tip
2008-09-08 19:09 ` Paolo Bonzini
@ 2008-09-08 19:16 ` Peter O'Gorman
2008-09-08 20:37 ` Paolo Bonzini
0 siblings, 1 reply; 21+ messages in thread
From: Peter O'Gorman @ 2008-09-08 19:16 UTC (permalink / raw)
To: Paolo Bonzini; +Cc: gcc-patches, gcc
On Mon, Sep 08, 2008 at 08:29:37PM +0200, Paolo Bonzini wrote:
>
> > Well, libtool-2.2.6 is finally released (twice even).
> >
> >> Actual approval depends on your answer to this question, but the patch is
> >> technically okay. Can you commit it to the src repository too? There is
> >> some regeneration to do there too.
> >
> > I know that GCC is now in stage 3, and that we missed the end of stage 1
> > by a week, but I would still like to update gcc's libtool to 2.2.6.
>
> It fixed a Darwin bug, right?
>
Yes, though I do not know if Jack actually filed a PR for it, it was
about debugging libstdc++ on darwin.
Lots of other fixes in libtool-2.2.6 too, of course.
Peter
--
Peter O'Gorman
pogma@thewrittenword.com
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [PATCH] Update libtool to latest git tip
2008-09-08 19:16 ` Peter O'Gorman
@ 2008-09-08 20:37 ` Paolo Bonzini
2008-09-12 17:29 ` Peter O'Gorman
0 siblings, 1 reply; 21+ messages in thread
From: Paolo Bonzini @ 2008-09-08 20:37 UTC (permalink / raw)
To: Peter O'Gorman; +Cc: gcc-patches, gcc
Peter O'Gorman wrote:
> On Mon, Sep 08, 2008 at 08:29:37PM +0200, Paolo Bonzini wrote:
>>> Well, libtool-2.2.6 is finally released (twice even).
>>>
>>>> Actual approval depends on your answer to this question, but the patch is
>>>> technically okay. Can you commit it to the src repository too? There is
>>>> some regeneration to do there too.
>>> I know that GCC is now in stage 3, and that we missed the end of stage 1
>>> by a week, but I would still like to update gcc's libtool to 2.2.6.
>> It fixed a Darwin bug, right?
>>
>
> Yes, though I do not know if Jack actually filed a PR for it, it was
> about debugging libstdc++ on darwin.
Post an updated patch and, next week, I'll apply it.
Paolo
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [PATCH] Update libtool to latest git tip
2008-09-08 20:37 ` Paolo Bonzini
@ 2008-09-12 17:29 ` Peter O'Gorman
2008-09-19 0:22 ` sje
0 siblings, 1 reply; 21+ messages in thread
From: Peter O'Gorman @ 2008-09-12 17:29 UTC (permalink / raw)
To: Paolo Bonzini; +Cc: gcc-patches
[-- Attachment #1: Type: text/plain, Size: 761 bytes --]
On Mon, Sep 08, 2008 at 10:28:53PM +0200, Paolo Bonzini wrote:
>
> Post an updated patch and, next week, I'll apply it.
Sorry about the delay, got side-tracked with work.
2008-MM-DD Peter O'Gorman <pogma@thewrittenword.com>
* libtool.m4: Update to libtool 2.2.6.
* lt~obsolete.m4: Update to libtool 2.2.6.
* ltmain.sh: Update to libtool 2.2.6.
* ltsugar.m4: Update to libtool 2.2.6.
* ltversion.m4: Update to libtool 2.2.6.
* ltoptions.m4: Update to libtool 2.2.6.
* ltgcc.m4: Update to match changes from libtool 2.2.6.
Attached patch gzipped to reduce size, includes the diffs for the
libtool bits only (as in ChangeLog entry above).
Thank you,
Peter
--
Peter O'Gorman
pogma@thewrittenword.com
[-- Attachment #2: libtool-2.2.6.patch.gz --]
[-- Type: application/x-gzip, Size: 56270 bytes --]
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [PATCH] Update libtool to latest git tip
2008-09-12 17:29 ` Peter O'Gorman
@ 2008-09-19 0:22 ` sje
2008-09-19 11:53 ` Paolo Bonzini
0 siblings, 1 reply; 21+ messages in thread
From: sje @ 2008-09-19 0:22 UTC (permalink / raw)
To: bonzini; +Cc: pogma, gcc-patches
On Fri, 12 Sep 2008 11:51:04 -0500, Peter O'Gorman wrote:
>
> On Mon, Sep 08, 2008 at 10:28:53PM +0200, Paolo Bonzini wrote:
> >
> > Post an updated patch and, next week, I'll apply it.
>
> Sorry about the delay, got side-tracked with work.
>
> 2008-MM-DD Peter O'Gorman <pogma@thewrittenword.com>
>
> * libtool.m4: Update to libtool 2.2.6.
> * lt~obsolete.m4: Update to libtool 2.2.6.
> * ltmain.sh: Update to libtool 2.2.6.
> * ltsugar.m4: Update to libtool 2.2.6.
> * ltversion.m4: Update to libtool 2.2.6.
> * ltoptions.m4: Update to libtool 2.2.6.
> * ltgcc.m4: Update to match changes from libtool 2.2.6.
>
> Attached patch gzipped to reduce size, includes the diffs for the
> libtool bits only (as in ChangeLog entry above).
It's next week. Is it time to apply the patch?
Steve Ellcey
sje@cup.hp.com
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [PATCH] Update libtool to latest git tip
2008-09-19 0:22 ` sje
@ 2008-09-19 11:53 ` Paolo Bonzini
2008-09-19 17:42 ` Steve Ellcey
0 siblings, 1 reply; 21+ messages in thread
From: Paolo Bonzini @ 2008-09-19 11:53 UTC (permalink / raw)
To: sje; +Cc: pogma, gcc-patches
sje@cup.hp.com wrote:
> On Fri, 12 Sep 2008 11:51:04 -0500, Peter O'Gorman wrote:
>> On Mon, Sep 08, 2008 at 10:28:53PM +0200, Paolo Bonzini wrote:
>>> Post an updated patch and, next week, I'll apply it.
>> Sorry about the delay, got side-tracked with work.
>>
>> 2008-MM-DD Peter O'Gorman <pogma@thewrittenword.com>
>>
>> * libtool.m4: Update to libtool 2.2.6.
>> * lt~obsolete.m4: Update to libtool 2.2.6.
>> * ltmain.sh: Update to libtool 2.2.6.
>> * ltsugar.m4: Update to libtool 2.2.6.
>> * ltversion.m4: Update to libtool 2.2.6.
>> * ltoptions.m4: Update to libtool 2.2.6.
>> * ltgcc.m4: Update to match changes from libtool 2.2.6.
>>
>> Attached patch gzipped to reduce size, includes the diffs for the
>> libtool bits only (as in ChangeLog entry above).
>
> It's next week. Is it time to apply the patch?
I was waiting for the libada multilib patch. But if you want to apply
it for me, feel free.
Paolo
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [PATCH] Update libtool to latest git tip
2008-09-19 11:53 ` Paolo Bonzini
@ 2008-09-19 17:42 ` Steve Ellcey
2008-09-25 23:06 ` Steve Ellcey
0 siblings, 1 reply; 21+ messages in thread
From: Steve Ellcey @ 2008-09-19 17:42 UTC (permalink / raw)
To: Paolo Bonzini; +Cc: pogma, gcc-patches
On Fri, 2008-09-19 at 12:30 +0200, Paolo Bonzini wrote:
> sje@cup.hp.com wrote:
> >
> > It's next week. Is it time to apply the patch?
>
> I was waiting for the libada multilib patch. But if you want to apply
> it for me, feel free.
>
> Paolo
I'm not that desperate for it. :-)
Steve Ellcey
sje@cup.hp.com
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [PATCH] Update libtool to latest git tip
2008-09-19 17:42 ` Steve Ellcey
@ 2008-09-25 23:06 ` Steve Ellcey
2008-09-26 0:52 ` Peter O'Gorman
0 siblings, 1 reply; 21+ messages in thread
From: Steve Ellcey @ 2008-09-25 23:06 UTC (permalink / raw)
To: bonzini, pogma; +Cc: gcc-patches
I put the 2.2.6 libtool that Peter O'Gorman sent out in my local tree
for testing and with the idea that I would check it in if Paolo didn't
get around to it and I ran into the following issue.
I was running autoconf in the main directory and in the gcc directory to
see if updating libtool caused any configure changes (I don't think it
should) and when I ran autoconf in the gcc directory (after updating
libtool) I got:
$ autoconf
configure.ac:1847: warning: LTOBSOLETE_VERSION is m4_require'd but is not m4_defun'd
configure.ac:1847: LTOBSOLETE_VERSION is required by...
../libtool.m4:99: LT_INIT is expanded from...
../libtool.m4:102: AC_PROG_LIBTOOL is expanded from...
configure.ac:1847: the top level
If I revert the libtool change I can run autoconf with no warnings and
I get the same configure file that is checked in. Anyone know what
the issue is here?
LTOBSOLETE_VERSION seems to be a new macro defined in lt~obsolete.m4 but
it is defined there. libtool.m4 has "AC_REQUIRE([LTOBSOLETE_VERSION])dnl"
but it doesn't seem to be picking it up from lt~obsolete.m4. I don't
think we need an explicit include for this to work do we?
I see a comment about this bug in the libtool mailing list from January,
but they indicate that it was fixed.
Any ideas?
Steve Ellcey
sje@cup.hp.com
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [PATCH] Update libtool to latest git tip
2008-09-25 23:06 ` Steve Ellcey
@ 2008-09-26 0:52 ` Peter O'Gorman
2008-09-26 1:42 ` Steve Ellcey
0 siblings, 1 reply; 21+ messages in thread
From: Peter O'Gorman @ 2008-09-26 0:52 UTC (permalink / raw)
To: Steve Ellcey; +Cc: bonzini, gcc-patches
On Thu, Sep 25, 2008 at 03:38:47PM -0700, Steve Ellcey wrote:
> I put the 2.2.6 libtool that Peter O'Gorman sent out in my local tree
> for testing and with the idea that I would check it in if Paolo didn't
> get around to it and I ran into the following issue.
>
> I was running autoconf in the main directory and in the gcc directory to
> see if updating libtool caused any configure changes (I don't think it
> should)
Why do you think that configure in gcc/ would not change. It contains an
AC_PROG_LIBTOOL macro, so should get the updated libtool.
> and when I ran autoconf in the gcc directory (after updating
> libtool) I got:
>
> $ autoconf
> configure.ac:1847: warning: LTOBSOLETE_VERSION is m4_require'd but is not m4_defun'd
> configure.ac:1847: LTOBSOLETE_VERSION is required by...
> ./libtool.m4:99: LT_INIT is expanded from...
> ./libtool.m4:102: AC_PROG_LIBTOOL is expanded from...
> configure.ac:1847: the top level
>
> Any ideas?
gcc/aclocal.m4 needs to be regenerated. It is a generated file, so I
did not include it in the patch that I sent.
Peter
--
Peter O'Gorman
pogma@thewrittenword.com
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [PATCH] Update libtool to latest git tip
2008-09-26 0:52 ` Peter O'Gorman
@ 2008-09-26 1:42 ` Steve Ellcey
2008-09-26 2:38 ` Peter O'Gorman
0 siblings, 1 reply; 21+ messages in thread
From: Steve Ellcey @ 2008-09-26 1:42 UTC (permalink / raw)
To: Peter O'Gorman; +Cc: bonzini, gcc-patches
On Thu, 2008-09-25 at 18:42 -0500, Peter O'Gorman wrote:
> Why do you think that configure in gcc/ would not change. It contains
> an AC_PROG_LIBTOOL macro, so should get the updated libtool.
Wishful thinking?
> gcc/aclocal.m4 needs to be regenerated. It is a generated file, so I
> did not include it in the patch that I sent.
>
> Peter
The ChangeLog should mention what gets regenerated though.
I am running autoreconf instead of autoconf now, that worked at the
top level and in libstdc++-v3 and boehm-gc but in the gcc directory I am
getting:
$ autoreconf
configure.ac:302: error: possibly undefined macro:
AC_USE_SYSTEM_EXTENSIONS
If this token and others are legitimate, please use
m4_pattern_allow.
See the Autoconf documentation.
autoreconf: /proj/opensrc/be/ia64-hp-hpux11.23/bin/autoconf failed with
exit status: 1
autoreconf should take care of running aclocal and automake, shouldn't
it? I am pretty sure I have the right versions of the tools.
Steve Ellcey
sje@cup.hp.com
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [PATCH] Update libtool to latest git tip
2008-09-26 1:42 ` Steve Ellcey
@ 2008-09-26 2:38 ` Peter O'Gorman
2008-09-26 8:10 ` Steve Ellcey
2008-09-26 16:33 ` Steve Ellcey
0 siblings, 2 replies; 21+ messages in thread
From: Peter O'Gorman @ 2008-09-26 2:38 UTC (permalink / raw)
To: Steve Ellcey; +Cc: bonzini, gcc-patches
On Thu, Sep 25, 2008 at 05:07:24PM -0700, Steve Ellcey wrote:
>
> On Thu, 2008-09-25 at 18:42 -0500, Peter O'Gorman wrote:
>
> > Why do you think that configure in gcc/ would not change. It contains
> > an AC_PROG_LIBTOOL macro, so should get the updated libtool.
>
> Wishful thinking?
>
> > gcc/aclocal.m4 needs to be regenerated. It is a generated file, so I
> > did not include it in the patch that I sent.
> >
> > Peter
>
> The ChangeLog should mention what gets regenerated though.
Ah, sorry. I was not sure what to do with that as I was not going to be
the committer (so not the one regenerating the files). I think
http://gcc.gnu.org/ml/gcc-patches/2008-08/msg01476.html lists all the
regenerated files.
>
> I am running autoreconf instead of autoconf now, that worked at the
> top level and in libstdc++-v3 and boehm-gc but in the gcc directory I am
> getting:
>
> $ autoreconf
> configure.ac:302: error: possibly undefined macro:
> AC_USE_SYSTEM_EXTENSIONS
> If this token and others are legitimate, please use
> m4_pattern_allow.
> See the Autoconf documentation.
> autoreconf: /proj/opensrc/be/ia64-hp-hpux11.23/bin/autoconf failed with
> exit status: 1
>
> autoreconf should take care of running aclocal and automake, shouldn't
> it? I am pretty sure I have the right versions of the tools.
autoreconf should work well when it knows where the m4 files live, for
automake'd dirs, the Makefile.am will have ACLOCAL_AMFLAGS which will
help autoreconf to know what to tell aclocal. The gcc dir does not have
a Makefile.am, so you need to tell it, something like:
env ACLOCAL='aclocal -I .. -I ../config' autoreconf
should work.
Peter
--
Peter O'Gorman
pogma@thewrittenword.com
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [PATCH] Update libtool to latest git tip
2008-09-26 2:38 ` Peter O'Gorman
@ 2008-09-26 8:10 ` Steve Ellcey
2008-09-26 16:33 ` Steve Ellcey
1 sibling, 0 replies; 21+ messages in thread
From: Steve Ellcey @ 2008-09-26 8:10 UTC (permalink / raw)
To: pogma; +Cc: bonzini, gcc-patches
On Thu, 2008-09-25 at 18:42 -0500, Peter O'Gorman wrote:
> env ACLOCAL='aclocal -I .. -I ../config' autoreconf
Yes, that works. Looks like gcc and libobjc are the two directories
that need it. I have updated everything and will see what happens with
my nightly builds.
If they go OK and Paolo gives the go-ahead I can check in the patch.
Steve Ellcey
sje@cup.hp.com
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [PATCH] Update libtool to latest git tip
2008-09-26 2:38 ` Peter O'Gorman
2008-09-26 8:10 ` Steve Ellcey
@ 2008-09-26 16:33 ` Steve Ellcey
2008-09-26 16:50 ` Paolo Bonzini
1 sibling, 1 reply; 21+ messages in thread
From: Steve Ellcey @ 2008-09-26 16:33 UTC (permalink / raw)
To: bonzini; +Cc: gcc-patches, Peter O'Gorman
Paolo,
I put Peter's patch with libtool 2.2.6 in my local tree and regenerated
all the Makefile.in and configure files and my nightly testing looked
good. Should I go ahead and check the libtool patch in? I can go ahead
and work on doing the same for binutils too.
Steve Ellcey
sje@cup.hp.com
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [PATCH] Update libtool to latest git tip
2008-09-26 16:33 ` Steve Ellcey
@ 2008-09-26 16:50 ` Paolo Bonzini
2008-09-26 17:18 ` Steve Ellcey
0 siblings, 1 reply; 21+ messages in thread
From: Paolo Bonzini @ 2008-09-26 16:50 UTC (permalink / raw)
To: sje; +Cc: gcc-patches, Peter O'Gorman
Steve Ellcey wrote:
> Paolo,
>
> I put Peter's patch with libtool 2.2.6 in my local tree and regenerated
> all the Makefile.in and configure files and my nightly testing looked
> good. Should I go ahead and check the libtool patch in? I can go ahead
> and work on doing the same for binutils too.
Yes, thanks very much.
Paolo
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [PATCH] Update libtool to latest git tip
2008-09-26 16:50 ` Paolo Bonzini
@ 2008-09-26 17:18 ` Steve Ellcey
2008-09-26 17:23 ` Peter O'Gorman
0 siblings, 1 reply; 21+ messages in thread
From: Steve Ellcey @ 2008-09-26 17:18 UTC (permalink / raw)
To: Paolo Bonzini; +Cc: gcc-patches, Peter O'Gorman
On Fri, 2008-09-26 at 18:06 +0200, Paolo Bonzini wrote:
> Steve Ellcey wrote:
> > Paolo,
> >
> > I put Peter's patch with libtool 2.2.6 in my local tree and regenerated
> > all the Makefile.in and configure files and my nightly testing looked
> > good. Should I go ahead and check the libtool patch in? I can go ahead
> > and work on doing the same for binutils too.
>
> Yes, thanks very much.
>
> Paolo
OK, the new libtool and the regenerated files are all checked in to GCC.
I will work on the src tree now.
Steve Ellcey
sje@cup.hp.com
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [PATCH] Update libtool to latest git tip
2008-09-26 17:18 ` Steve Ellcey
@ 2008-09-26 17:23 ` Peter O'Gorman
0 siblings, 0 replies; 21+ messages in thread
From: Peter O'Gorman @ 2008-09-26 17:23 UTC (permalink / raw)
To: Steve Ellcey; +Cc: Paolo Bonzini, gcc-patches
On Fri, Sep 26, 2008 at 09:48:42AM -0700, Steve Ellcey wrote:
> OK, the new libtool and the regenerated files are all checked in to GCC.
> I will work on the src tree now.
Thank you!
Peter
--
Peter O'Gorman
pogma@thewrittenword.com
^ permalink raw reply [flat|nested] 21+ messages in thread
end of thread, other threads:[~2008-09-26 16:54 UTC | newest]
Thread overview: 21+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
[not found] <48988051.1020002@pogma.com>
[not found] ` <20080805214446.GA23703@bromo.msbb.uc.edu>
[not found] ` <4899CE7F.1080301@pogma.com>
[not found] ` <20080806161928.GA686@bromo.msbb.uc.edu>
[not found] ` <4899D0A7.8040307@pogma.com>
[not found] ` <20080806184347.GC2521@ins.uni-bonn.de>
[not found] ` <489A9BD2.2070800@gnu.org>
[not found] ` <489B2A7C.3020209@pogma.com>
[not found] ` <20080811194722.GF8049@ins.uni-bonn.de>
[not found] ` <48A09ABD.8050903@pogma.com>
2008-08-21 6:03 ` [PATCH] Update libtool to latest git tip (was: Re: Update libtool?) Peter O'Gorman
2008-08-21 14:55 ` [PATCH] Update libtool to latest git tip Paolo Bonzini
2008-08-21 21:14 ` Peter O'Gorman
2008-08-25 17:26 ` Peter O'Gorman
2008-09-08 18:31 ` Peter O'Gorman
2008-09-08 19:09 ` Paolo Bonzini
2008-09-08 19:16 ` Peter O'Gorman
2008-09-08 20:37 ` Paolo Bonzini
2008-09-12 17:29 ` Peter O'Gorman
2008-09-19 0:22 ` sje
2008-09-19 11:53 ` Paolo Bonzini
2008-09-19 17:42 ` Steve Ellcey
2008-09-25 23:06 ` Steve Ellcey
2008-09-26 0:52 ` Peter O'Gorman
2008-09-26 1:42 ` Steve Ellcey
2008-09-26 2:38 ` Peter O'Gorman
2008-09-26 8:10 ` Steve Ellcey
2008-09-26 16:33 ` Steve Ellcey
2008-09-26 16:50 ` Paolo Bonzini
2008-09-26 17:18 ` Steve Ellcey
2008-09-26 17:23 ` Peter O'Gorman
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).