Trivial grammar fixes in the documentation.

Trivial grammar fixes in the documentation.

[Ralf Wildenhues]

Since I was searching for trivial grammar errors anyway,
<http://lists.gnu.org/archive/html/autoconf-patches/2009-04/msg00067.html>,
I figured I might as well do so in the GCC manuals.

Tested 'make info pdf html', I was going to push this as obvious, except
for one change to the -fwhole-program description which is a bit larger,
and the following two instances I'm not sure about; I haven't changed
them yet:

gcc/doc/md.texi:
  @cindex @code{push@var{m}1} instruction pattern
  @item @samp{push@var{m}1}
  Output a push instruction.  Operand 0 is value to push.  Used only when
  @code{PUSH_ROUNDING} is defined.  For historical reason, this pattern may be
  missing and in such case an @code{mov} expander is used instead, with a
  @code{MEM} expression forming the push operation. [...]

Do people read or pronounce "mov" as emm-oh-vee or as moff?
(and there's a   s/is value/is the value/  error, too)

gcc/doc/tm.texi:
  @deftypefn {Target Hook} void TARGET_CXX_DETERMINE_CLASS_DATA_VISIBILITY (tree @var{decl})
  @var{decl} is a virtual table, virtual table table, typeinfo object,
  or other similar implicit class data object that will be emitted with
  external linkage in this translation unit. [...]

Is that "virtual table table" correct?

Thanks,
Ralf

gcc/ChangeLog:
2009-04-25  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>

	* doc/c-tree.texi (Types, Functions, Expression trees): Fix
	grammar nits.
	* doc/cfg.texi (Maintaining the CFG, Liveness information):
	Likewise.
	* doc/cpp.texi (Standard Predefined Macros)
	(Implementation-defined behavior): Likewise.
	* doc/extend.texi (Function Attributes, Type Attributes):
	Likewise.
	* doc/gimple.texi (GIMPLE Exception Handling)
	(@code{GIMPLE_ASSIGN}): Likewise.
	* doc/install.texi (Prerequisites, Configuration, Specific):
	Likewise.
	* doc/invoke.texi (Warning Options, Optimize Options)
	(AVR Options, Darwin Options): Likewise.
	(Optimize Options): Reformulate -fwhole-program description.
	* doc/loop.texi (Lambda): Likewise.
	* doc/md.texi (Output Template, Define Constraints)
	(Standard Names, Insn Splitting): Likewise.
	* doc/options.texi (Option properties): Likewise.
	* doc/passes.texi (Tree-SSA passes): Likewise.
	* doc/rtl.texi (Side Effects, Assembler, Insns): Likewise.
	* doc/tm.texi (Register Classes, Old Constraints, Scalar Return)
	(File Names and DBX): Likewise.
	* doc/trouble.texi (Incompatibilities): Likewise.

diff --git a/gcc/doc/c-tree.texi b/gcc/doc/c-tree.texi
index 0039228..3823d8e 100644
--- a/gcc/doc/c-tree.texi
+++ b/gcc/doc/c-tree.texi
@@ -373,7 +373,7 @@ The alignment of the type, in bits, represented as an @code{int}.
 
 @item TYPE_NAME
 This macro returns a declaration (in the form of a @code{TYPE_DECL}) for
-the type.  (Note this macro does @emph{not} return a
+the type.  (Note this macro does @emph{not} return an
 @code{IDENTIFIER_NODE}, as you might expect, given its name!)  You can
 look at the @code{DECL_NAME} of the @code{TYPE_DECL} to obtain the
 actual name of the type.  The @code{TYPE_NAME} will be @code{NULL_TREE}
@@ -1256,7 +1256,7 @@ structures, something like the following should be used
 @findex OVL_NEXT
 
 A function is represented by a @code{FUNCTION_DECL} node.  A set of
-overloaded functions is sometimes represented by a @code{OVERLOAD} node.
+overloaded functions is sometimes represented by an @code{OVERLOAD} node.
 
 An @code{OVERLOAD} node is not a declaration, so none of the
 @samp{DECL_} macros should be used on an @code{OVERLOAD}.  An
@@ -2113,7 +2113,7 @@ comparisons, and so forth.
 
 These nodes represent fixed-point constants.  The type of these constants
 is obtained with @code{TREE_TYPE}.  @code{TREE_FIXED_CST_PTR} points to
-to struct fixed_value;  @code{TREE_FIXED_CST} returns the structure itself.
+a struct fixed_value;  @code{TREE_FIXED_CST} returns the structure itself.
 Struct fixed_value contains @code{data} with the size of two
 HOST_BITS_PER_WIDE_INT and @code{mode} as the associated fixed-point
 machine mode for @code{data}.
@@ -2569,7 +2569,7 @@ The statement-expression extension allows code like this:
 @smallexample
 int f() @{ return (@{ int j; j = 3; j + 7; @}); @}
 @end smallexample
-In other words, an sequence of statements may occur where a single
+In other words, a sequence of statements may occur where a single
 expression would normally appear.  The @code{STMT_EXPR} node represents
 such an expression.  The @code{STMT_EXPR_STMT} gives the statement
 contained in the expression.  The value of the expression is the value
diff --git a/gcc/doc/cfg.texi b/gcc/doc/cfg.texi
index 323f6b5..660c09c 100644
--- a/gcc/doc/cfg.texi
+++ b/gcc/doc/cfg.texi
@@ -608,7 +608,7 @@ includes the creation of new basic blocks where needed.  In the
 iterator on an edge, and @code{bsi_commit_edge_inserts} which flushes
 the instruction to actual instruction stream.
 
-While debugging the optimization pass, an @code{verify_flow_info}
+While debugging the optimization pass, a @code{verify_flow_info}
 function may be useful to find bugs in the control flow graph updating
 code.
 
@@ -638,7 +638,7 @@ used on some path from @code{P} to the end of the function.  With
 beginning of the function to @code{P} that defines the variable.  
 @code{LIVE} is the intersection of the @code{LR} and @code{UR} and a
 variable is live at @code{P} if there is both an assignment that reaches
-it from the beginning of the function and a uses that can be reached on
+it from the beginning of the function and a use that can be reached on
 some path from @code{P} to the end of the function.
 
 In general @code{LIVE} is the most useful of the three.  The macros
diff --git a/gcc/doc/cpp.texi b/gcc/doc/cpp.texi
index d79991c..ce4c0c3 100644
--- a/gcc/doc/cpp.texi
+++ b/gcc/doc/cpp.texi
@@ -1936,7 +1936,7 @@ in the near future.
 @item __OBJC__
 This macro is defined, with value 1, when the Objective-C compiler is in
 use.  You can use @code{__OBJC__} to test whether a header is compiled
-by a C compiler or a Objective-C compiler.
+by a C compiler or an Objective-C compiler.
 
 @item __ASSEMBLER__
 This macro is defined with value 1 when preprocessing assembly
@@ -4042,7 +4042,7 @@ The preprocessor and compiler interpret character constants in the
 same way; i.e.@: escape sequences such as @samp{\a} are given the
 values they would have on the target machine.
 
-The compiler values a multi-character character constant a character
+The compiler evaluates a multi-character character constant a character
 at a time, shifting the previous value left by the number of bits per
 target character, and then or-ing in the bit-pattern of the new
 character truncated to the width of a target character.  The final
diff --git a/gcc/doc/extend.texi b/gcc/doc/extend.texi
index 4a7db02..4e06be3 100644
--- a/gcc/doc/extend.texi
+++ b/gcc/doc/extend.texi
@@ -2153,7 +2153,7 @@ On the SH Symbian OS target the @code{dllimport} attribute also has
 another affect---it can cause the vtable and run-time type information
 for a class to be exported.  This happens when the class has a
 dllimport'ed constructor or a non-inline, non-pure virtual function
-and, for either of those two conditions, the class also has a inline
+and, for either of those two conditions, the class also has an inline
 constructor or destructor and has a key function that is defined in
 the current translation unit.
 
@@ -4422,7 +4422,7 @@ struct __attribute__ ((__packed__)) my_packed_struct
   @};
 @end smallexample
 
-You may only specify this attribute on the definition of a @code{enum},
+You may only specify this attribute on the definition of an @code{enum},
 @code{struct} or @code{union}, not on a @code{typedef} which does not
 also define the enumerated type, structure or union.
 
diff --git a/gcc/doc/gimple.texi b/gcc/doc/gimple.texi
index 34b7689..cc1e890 100644
--- a/gcc/doc/gimple.texi
+++ b/gcc/doc/gimple.texi
@@ -389,7 +389,7 @@ types, the associated handler code is executed.  If the handler
 code falls off the bottom, execution continues after the original
 @code{GIMPLE_TRY_CATCH}.
 
-@item An @code{GIMPLE_EH_FILTER} statement.  This has a list of
+@item A @code{GIMPLE_EH_FILTER} statement.  This has a list of
 permitted exception types, and code to handle a match failure.  If the
 thrown exception does not match one of the allowed types, the
 associated match failure code is executed.  If the thrown exception
@@ -1087,7 +1087,7 @@ statement @code{G}.
 @end deftypefn
  
 @deftypefn {GIMPLE function} bool gimple_assign_cast_p (gimple s)
-Return true if @code{S} is an type-cast assignment.
+Return true if @code{S} is a type-cast assignment.
 @end deftypefn
 
 
diff --git a/gcc/doc/install.texi b/gcc/doc/install.texi
index 7cba4d3..7d3ef1f 100644
--- a/gcc/doc/install.texi
+++ b/gcc/doc/install.texi
@@ -464,7 +464,7 @@ the GCC-specific entry point.  You can download a suitable jar from
 @itemx antlr binary
 
 If you wish to build the @command{gjdoc} binary in libjava, you will
-need to have a @file{antlr.jar} library available. The library is
+need to have an @file{antlr.jar} library available. The library is
 searched in system locations but can be configured with
 @option{--with-antlr-jar=} instead.  When configuring with
 @option{--enable-java-maintainer-mode}, you will need to have one of
@@ -1605,7 +1605,7 @@ that will be used while building GCC itself.  This option can be useful
 if the directory layouts are different between the system you are building
 GCC on, and the system where you will deploy it.
 
-For example, on a @option{ia64-hp-hpux} system, you may have the GNU
+For example, on an @option{ia64-hp-hpux} system, you may have the GNU
 assembler and linker in @file{/usr/bin}, and the native tools in a
 different path, and build a toolchain that expects to find the
 native tools in @file{/usr/bin}.
@@ -3389,7 +3389,7 @@ The native AIX tools do interoperate with GCC@.
 Building @file{libstdc++.a} requires a fix for an AIX Assembler bug
 APAR IY26685 (AIX 4.3) or APAR IY25528 (AIX 5.1).  It also requires a
 fix for another AIX Assembler bug and a co-dependent AIX Archiver fix
-referenced as APAR IY53606 (AIX 5.2) or a APAR IY54774 (AIX 5.1)
+referenced as APAR IY53606 (AIX 5.2) or an APAR IY54774 (AIX 5.1)
 
 @samp{libstdc++} in GCC 3.4 increments the major version number of the
 shared object and GCC installation places the @file{libstdc++.a}
@@ -3944,7 +3944,7 @@ compiler.  This is Sun bug 4974440.  This is fixed with patch 112760-07.
 GCC 3.4 changed the default debugging format from STABS to DWARF-2 for
 32-bit code on Solaris 7 and later.  If you use the Sun assembler, this
 change apparently runs afoul of Sun bug 4910101 (which is referenced as
-a x86-only problem by Sun, probably because they do not use DWARF-2).
+an x86-only problem by Sun, probably because they do not use DWARF-2).
 A symptom of the problem is that you cannot compile C++ programs like
 @command{groff} 1.19.1 without getting messages similar to the following:
 
diff --git a/gcc/doc/invoke.texi b/gcc/doc/invoke.texi
index f7ea0ef..cbe452d 100644
--- a/gcc/doc/invoke.texi
+++ b/gcc/doc/invoke.texi
@@ -3152,7 +3152,7 @@ Warn whenever a function is defined with a return-type that defaults
 to @code{int}.  Also warn about any @code{return} statement with no
 return-value in a function whose return-type is not @code{void}
 (falling off the end of the function body is considered returning
-without a value), and about a @code{return} statement with a
+without a value), and about a @code{return} statement with an
 expression in a function whose return-type is @code{void}.
 
 For C++, a function without return type always produces a diagnostic
@@ -6211,7 +6211,7 @@ This flag is enabled by default at @option{-O3}.
 @item -fipa-matrix-reorg
 @opindex fipa-matrix-reorg
 Perform matrix flattening and transposing.
-Matrix flattening tries to replace a m-dimensional matrix 
+Matrix flattening tries to replace an m-dimensional matrix
 with its equivalent n-dimensional matrix, where n < m.
 This reduces the level of indirection needed for accessing the elements
 of the matrix. The second optimization is matrix transposing that
@@ -6776,13 +6776,13 @@ Enabled by default with @option{-funroll-loops}.
 
 @item -fwhole-program
 @opindex fwhole-program
-Assume that the current compilation unit represents whole program being
+Assume that the current compilation unit represents the whole program being
 compiled.  All public functions and variables with the exception of @code{main}
 and those merged by attribute @code{externally_visible} become static functions
-and in a affect gets more aggressively optimized by interprocedural optimizers.
-While this option is equivalent to proper use of @code{static} keyword for
-programs consisting of single file, in combination with option
-@option{--combine} this flag can be used to compile most of smaller scale C
+and in effect are optimized more aggressively by interprocedural optimizers.
+While this option is equivalent to proper use of the @code{static} keyword for
+programs consisting of a single file, in combination with option
+@option{--combine} this flag can be used to compile many smaller scale C
 programs since the functions and variables become local for the whole combined
 compilation unit, not for the single source file itself.
 
@@ -9366,7 +9366,7 @@ Change only the low 8 bits of the stack pointer.
 @item -mint8
 @opindex mint8
 Assume int to be 8 bit integer.  This affects the sizes of all types: A
-char will be 1 byte, an int will be 1 byte, an long will be 2 bytes
+char will be 1 byte, an int will be 1 byte, a long will be 2 bytes
 and long long will be 4 bytes.  Please note that this option does not
 comply to the C standards, but it will provide you with smaller code
 size.
@@ -9737,7 +9737,7 @@ that GCC is targetting, like @option{-mcpu} or @option{-march}.  The
 The Darwin tools vary in their behavior when presented with an ISA
 mismatch.  The assembler, @file{as}, will only permit instructions to
 be used that are valid for the subtype of the file it is generating,
-so you cannot put 64-bit instructions in an @samp{ppc750} object file.
+so you cannot put 64-bit instructions in a @samp{ppc750} object file.
 The linker for shared libraries, @file{/usr/bin/libtool}, will fail
 and print an error if asked to create a shared library with a less
 restrictive subtype than its input files (for instance, trying to put
diff --git a/gcc/doc/loop.texi b/gcc/doc/loop.texi
index 567d711..356c00d 100644
--- a/gcc/doc/loop.texi
+++ b/gcc/doc/loop.texi
@@ -605,7 +605,7 @@ improve cache behavior or remove inner loop dependencies to allow
 parallelization and vectorization to take place.
 
 To perform these transformations, Lambda requires that the loopnest be
-converted into a internal form that can be matrix transformed easily.
+converted into an internal form that can be matrix transformed easily.
 To do this conversion, the function
 @code{gcc_loopnest_to_lambda_loopnest} is provided.  If the loop cannot
 be transformed using lambda, this function will return NULL.
diff --git a/gcc/doc/md.texi b/gcc/doc/md.texi
index a78233c..7c4da31 100644
--- a/gcc/doc/md.texi
+++ b/gcc/doc/md.texi
@@ -552,7 +552,7 @@ As a special case, a template consisting of the single character @code{#}
 instructs the compiler to first split the insn, and then output the
 resulting instructions separately.  This helps eliminate redundancy in the
 output templates.   If you have a @code{define_insn} that needs to emit
-multiple assembler instructions, and there is an matching @code{define_split}
+multiple assembler instructions, and there is a matching @code{define_split}
 already defined, then you can simply use @code{#} as the output template
 instead of writing an output template that emits the multiple assembler
 instructions.
@@ -3323,7 +3323,7 @@ memory address of this type.  If @samp{Q} is defined with
 @code{define_memory_constraint}, a @samp{Q} constraint can handle any
 memory operand, because @code{reload} knows it can simply copy the
 memory address into a base register if required.  This is analogous to
-the way a @samp{o} constraint can handle any memory operand.
+the way an @samp{o} constraint can handle any memory operand.
 
 The syntax and semantics are otherwise identical to
 @code{define_constraint}.
@@ -4729,7 +4729,7 @@ A label that precedes the table itself.
 A label to jump to if the index has a value outside the bounds.
 @end enumerate
 
-The table is a @code{addr_vec} or @code{addr_diff_vec} inside of a
+The table is an @code{addr_vec} or @code{addr_diff_vec} inside of a
 @code{jump_insn}.  The number of elements in the table is one plus the
 difference between the upper bound and the lower bound.
 
@@ -4949,7 +4949,7 @@ the first three are normally used by the generic mechanism.
 
 @cindex @code{builtin_setjmp_receiver} instruction pattern
 @item @samp{builtin_setjmp_receiver}
-This pattern, if defined, contains code needed at the site of an
+This pattern, if defined, contains code needed at the site of a
 built-in setjmp that isn't needed at the site of a nonlocal goto.  You
 will not normally need to define this pattern.  A typical reason why you
 might need this pattern is if some value, such as a pointer to a global
@@ -6116,7 +6116,7 @@ more assistance is needed.  Splitter is required to create only unconditional
 jumps, or simple conditional jump instructions.  Additionally it must attach a
 @code{REG_BR_PROB} note to each conditional jump.  A global variable
 @code{split_branch_probability} holds the probability of the original branch in case
-it was an simple conditional jump, @minus{}1 otherwise.  To simplify
+it was a simple conditional jump, @minus{}1 otherwise.  To simplify
 recomputing of edge frequencies, the new sequence is required to have only
 forward jumps to the newly created labels.
 
diff --git a/gcc/doc/options.texi b/gcc/doc/options.texi
index a05a6b2..53ad66b 100644
--- a/gcc/doc/options.texi
+++ b/gcc/doc/options.texi
@@ -106,7 +106,7 @@ The option does not have a ``no-'' form.  All options beginning with
 property is used.
 
 @item Negative(@var{othername})
-The option will turn off another option @var{othername}, which is the
+The option will turn off another option @var{othername}, which is
 the option name with the leading ``-'' removed.  This chain action will
 propagate through the @code{Negative} property of the option to be
 turned off.
diff --git a/gcc/doc/passes.texi b/gcc/doc/passes.texi
index 51dcc41..3dcee39 100644
--- a/gcc/doc/passes.texi
+++ b/gcc/doc/passes.texi
@@ -297,7 +297,7 @@ times throughout the optimization process.  It is located in
 
 This pass performs trivial dominator-based copy and constant propagation,
 expression simplification, and jump threading.  It is run multiple times
-throughout the optimization process.  It it located in @file{tree-ssa-dom.c}
+throughout the optimization process.  It is located in @file{tree-ssa-dom.c}
 and is described by @code{pass_dominator}.
 
 @item Forward propagation of single-use variables
diff --git a/gcc/doc/rtl.texi b/gcc/doc/rtl.texi
index 1411f24..2567f10 100644
--- a/gcc/doc/rtl.texi
+++ b/gcc/doc/rtl.texi
@@ -2950,7 +2950,7 @@ store a value in @var{x}.  @var{x} must be a @code{reg} expression.
 In some situations, it may be tempting to add a @code{use} of a
 register in a @code{parallel} to describe a situation where the value
 of a special register will modify the behavior of the instruction.
-An hypothetical example might be a pattern for an addition that can
+A hypothetical example might be a pattern for an addition that can
 either wrap around or use saturating addition depending on the value
 of a special control register:
 
@@ -3256,7 +3256,7 @@ mode @var{m1} is the mode of the sum @code{x+y}; @var{m2} is that of
 
 When an @code{asm} statement has multiple output values, its insn has
 several such @code{set} RTX's inside of a @code{parallel}.  Each @code{set}
-contains a @code{asm_operands}; all of these share the same assembler
+contains an @code{asm_operands}; all of these share the same assembler
 template and vectors, but each contains the constraint for the respective
 output operand.  They are also distinguished by the output-operand index
 number, which is 0, 1, @dots{} for successive output operands.
@@ -3680,7 +3680,7 @@ used, and flow optimization to build an accurate flow graph.
 
 @findex REG_LABEL_TARGET
 @item REG_LABEL_TARGET
-This insn is a @code{jump_insn} but not a @code{addr_vec} or
+This insn is a @code{jump_insn} but not an @code{addr_vec} or
 @code{addr_diff_vec}.  It uses @var{op}, a @code{code_label} as a
 direct or indirect jump target.  Its purpose is similar to that of
 @code{REG_LABEL_OPERAND}.  This note is only present if the insn has
@@ -3690,7 +3690,7 @@ insn-field) goes into the @code{JUMP_LABEL} field and does not have a
 
 @findex REG_CROSSING_JUMP
 @item REG_CROSSING_JUMP
-This insn is an branching instruction (either an unconditional jump or
+This insn is a branching instruction (either an unconditional jump or
 an indirect jump) which crosses between hot and cold sections, which
 could potentially be very far apart in the executable.  The presence
 of this note indicates to other optimizations that this branching
diff --git a/gcc/doc/tm.texi b/gcc/doc/tm.texi
index 5718eb9..1197757 100644
--- a/gcc/doc/tm.texi
+++ b/gcc/doc/tm.texi
@@ -2641,7 +2641,7 @@ allow copying all registers to and from memory, but require a scratch
 register for stores to some memory locations (e.g., those with symbolic
 address on the RT, and those with certain symbolic address on the SPARC
 when compiling PIC)@.  Scratch registers need not have the same mode
-as the value being copied, and usually hold a different value that
+as the value being copied, and usually hold a different value than
 that being copied.  Special patterns in the md file are needed to
 describe how the copy is performed with the help of the scratch register;
 these patterns also describe the number, register class(es) and mode(s)
@@ -3030,7 +3030,7 @@ If the letter @samp{Q} is marked as @code{EXTRA_MEMORY_CONSTRAINT},
 a @samp{Q} constraint can handle any memory operand, because the
 reload pass knows it can be reloaded by copying the memory address
 into a base register if required.  This is analogous to the way
-a @samp{o} constraint can handle any memory operand.
+an @samp{o} constraint can handle any memory operand.
 @end defmac
 
 @defmac EXTRA_ADDRESS_CONSTRAINT (@var{c}, @var{str})
@@ -4301,7 +4301,7 @@ values---values that can fit in registers.
 
 Define this to return an RTX representing the place where a function
 returns or receives a value of data type @var{ret_type}, a tree node
-node representing a data type.  @var{fn_decl_or_type} is a tree node
+representing a data type.  @var{fn_decl_or_type} is a tree node
 representing @code{FUNCTION_DECL} or @code{FUNCTION_TYPE} of a
 function being called.  If @var{outgoing} is false, the hook should
 compute the register in which the caller will see the return value.
@@ -8962,7 +8962,7 @@ of compilation, which is correct for most machines.
 @defmac DBX_OUTPUT_NULL_N_SO_AT_MAIN_SOURCE_FILE_END
 Define this macro @emph{instead of} defining
 @code{DBX_OUTPUT_MAIN_SOURCE_FILE_END}, if what needs to be output at
-the end of compilation is a @code{N_SO} stab with an empty string,
+the end of compilation is an @code{N_SO} stab with an empty string,
 whose value is the highest absolute text address in the file.
 @end defmac
 
diff --git a/gcc/doc/trouble.texi b/gcc/doc/trouble.texi
index a3d8187..c08e8b3 100644
--- a/gcc/doc/trouble.texi
+++ b/gcc/doc/trouble.texi
@@ -342,7 +342,7 @@ Declarations of external variables and functions within a block apply
 only to the block containing the declaration.  In other words, they
 have the same scope as any other declaration in the same place.
 
-In some other C compilers, a @code{extern} declaration affects all the
+In some other C compilers, an @code{extern} declaration affects all the
 rest of the file even if it happens within a block.
 
 @item

Re: Trivial grammar fixes in the documentation.

[Joseph S. Myers]

One change to one of your fixes and some other issues noticed in the same 
paragraphs:

On Sat, 25 Apr 2009, Ralf Wildenhues wrote:

> @@ -2113,7 +2113,7 @@ comparisons, and so forth.
>  
>  These nodes represent fixed-point constants.  The type of these constants
>  is obtained with @code{TREE_TYPE}.  @code{TREE_FIXED_CST_PTR} points to
> -to struct fixed_value;  @code{TREE_FIXED_CST} returns the structure itself.
> +a struct fixed_value;  @code{TREE_FIXED_CST} returns the structure itself.
>  Struct fixed_value contains @code{data} with the size of two
>  HOST_BITS_PER_WIDE_INT and @code{mode} as the associated fixed-point

There are other problems there: @code{struct fixed_value} (twice), 
@code{HOST_BITS_PER_WIDE_INT}.

> @@ -3389,7 +3389,7 @@ The native AIX tools do interoperate with GCC@.
>  Building @file{libstdc++.a} requires a fix for an AIX Assembler bug
>  APAR IY26685 (AIX 4.3) or APAR IY25528 (AIX 5.1).  It also requires a
>  fix for another AIX Assembler bug and a co-dependent AIX Archiver fix
> -referenced as APAR IY53606 (AIX 5.2) or a APAR IY54774 (AIX 5.1)
> +referenced as APAR IY53606 (AIX 5.2) or an APAR IY54774 (AIX 5.1)

I think this should be "as" not "an".

> @@ -6211,7 +6211,7 @@ This flag is enabled by default at @option{-O3}.
>  @item -fipa-matrix-reorg
>  @opindex fipa-matrix-reorg
>  Perform matrix flattening and transposing.
> -Matrix flattening tries to replace a m-dimensional matrix 
> +Matrix flattening tries to replace an m-dimensional matrix
>  with its equivalent n-dimensional matrix, where n < m.
>  This reduces the level of indirection needed for accessing the elements
>  of the matrix. The second optimization is matrix transposing that

These would probably better use @math{m}, @math{n}, @math{n < m}.

-- 
Joseph S. Myers
joseph@codesourcery.com

Re: Trivial grammar fixes in the documentation.

[Ralf Wildenhues]

* Joseph S. Myers wrote on Sat, Apr 25, 2009 at 04:51:05PM CEST:
> One change to one of your fixes and some other issues noticed in the same 
> paragraphs:

Thanks.  Updated patch below, retested "make info pdf html".
OK?  Do I need approval?

Cheers,
Ralf

gcc/ChangeLog:
2009-04-25  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>

	* doc/c-tree.texi (Types, Functions, Expression trees): Fix
	grammar nits.
	* doc/cfg.texi (Maintaining the CFG, Liveness information):
	Likewise.
	* doc/cpp.texi (Standard Predefined Macros)
	(Implementation-defined behavior): Likewise.
	* doc/extend.texi (Function Attributes, Type Attributes):
	Likewise.
	* doc/gimple.texi (GIMPLE Exception Handling)
	(@code{GIMPLE_ASSIGN}): Likewise.
	* doc/install.texi (Prerequisites, Configuration, Specific):
	Likewise.
	* doc/invoke.texi (Warning Options, Optimize Options)
	(AVR Options, Darwin Options): Likewise.
	(Optimize Options): Reformulate -fwhole-program description.
	* doc/loop.texi (Lambda): Likewise.
	* doc/md.texi (Output Template, Define Constraints)
	(Standard Names, Insn Splitting): Likewise.
	* doc/options.texi (Option properties): Likewise.
	* doc/passes.texi (Tree-SSA passes): Likewise.
	* doc/rtl.texi (Side Effects, Assembler, Insns): Likewise.
	* doc/tm.texi (Register Classes, Old Constraints, Scalar Return)
	(File Names and DBX): Likewise.
	* doc/trouble.texi (Incompatibilities): Likewise.

Index: gcc/doc/loop.texi
===================================================================
--- gcc/doc/loop.texi	(revision 146775)
+++ gcc/doc/loop.texi	(working copy)
@@ -605,7 +605,7 @@
 parallelization and vectorization to take place.
 
 To perform these transformations, Lambda requires that the loopnest be
-converted into a internal form that can be matrix transformed easily.
+converted into an internal form that can be matrix transformed easily.
 To do this conversion, the function
 @code{gcc_loopnest_to_lambda_loopnest} is provided.  If the loop cannot
 be transformed using lambda, this function will return NULL.
Index: gcc/doc/cpp.texi
===================================================================
--- gcc/doc/cpp.texi	(revision 146775)
+++ gcc/doc/cpp.texi	(working copy)
@@ -1936,7 +1936,7 @@
 @item __OBJC__
 This macro is defined, with value 1, when the Objective-C compiler is in
 use.  You can use @code{__OBJC__} to test whether a header is compiled
-by a C compiler or a Objective-C compiler.
+by a C compiler or an Objective-C compiler.
 
 @item __ASSEMBLER__
 This macro is defined with value 1 when preprocessing assembly
@@ -4042,7 +4042,7 @@
 same way; i.e.@: escape sequences such as @samp{\a} are given the
 values they would have on the target machine.
 
-The compiler values a multi-character character constant a character
+The compiler evaluates a multi-character character constant a character
 at a time, shifting the previous value left by the number of bits per
 target character, and then or-ing in the bit-pattern of the new
 character truncated to the width of a target character.  The final
Index: gcc/doc/extend.texi
===================================================================
--- gcc/doc/extend.texi	(revision 146775)
+++ gcc/doc/extend.texi	(working copy)
@@ -2153,7 +2153,7 @@
 another affect---it can cause the vtable and run-time type information
 for a class to be exported.  This happens when the class has a
 dllimport'ed constructor or a non-inline, non-pure virtual function
-and, for either of those two conditions, the class also has a inline
+and, for either of those two conditions, the class also has an inline
 constructor or destructor and has a key function that is defined in
 the current translation unit.
 
@@ -4422,7 +4422,7 @@
   @};
 @end smallexample
 
-You may only specify this attribute on the definition of a @code{enum},
+You may only specify this attribute on the definition of an @code{enum},
 @code{struct} or @code{union}, not on a @code{typedef} which does not
 also define the enumerated type, structure or union.
 
Index: gcc/doc/options.texi
===================================================================
--- gcc/doc/options.texi	(revision 146775)
+++ gcc/doc/options.texi	(working copy)
@@ -106,7 +106,7 @@
 property is used.
 
 @item Negative(@var{othername})
-The option will turn off another option @var{othername}, which is the
+The option will turn off another option @var{othername}, which is
 the option name with the leading ``-'' removed.  This chain action will
 propagate through the @code{Negative} property of the option to be
 turned off.
Index: gcc/doc/passes.texi
===================================================================
--- gcc/doc/passes.texi	(revision 146775)
+++ gcc/doc/passes.texi	(working copy)
@@ -297,7 +297,7 @@
 
 This pass performs trivial dominator-based copy and constant propagation,
 expression simplification, and jump threading.  It is run multiple times
-throughout the optimization process.  It it located in @file{tree-ssa-dom.c}
+throughout the optimization process.  It is located in @file{tree-ssa-dom.c}
 and is described by @code{pass_dominator}.
 
 @item Forward propagation of single-use variables
Index: gcc/doc/cfg.texi
===================================================================
--- gcc/doc/cfg.texi	(revision 146775)
+++ gcc/doc/cfg.texi	(working copy)
@@ -608,7 +608,7 @@
 iterator on an edge, and @code{bsi_commit_edge_inserts} which flushes
 the instruction to actual instruction stream.
 
-While debugging the optimization pass, an @code{verify_flow_info}
+While debugging the optimization pass, a @code{verify_flow_info}
 function may be useful to find bugs in the control flow graph updating
 code.
 
@@ -638,7 +638,7 @@
 beginning of the function to @code{P} that defines the variable.  
 @code{LIVE} is the intersection of the @code{LR} and @code{UR} and a
 variable is live at @code{P} if there is both an assignment that reaches
-it from the beginning of the function and a uses that can be reached on
+it from the beginning of the function and a use that can be reached on
 some path from @code{P} to the end of the function.
 
 In general @code{LIVE} is the most useful of the three.  The macros
Index: gcc/doc/trouble.texi
===================================================================
--- gcc/doc/trouble.texi	(revision 146775)
+++ gcc/doc/trouble.texi	(working copy)
@@ -342,7 +342,7 @@
 only to the block containing the declaration.  In other words, they
 have the same scope as any other declaration in the same place.
 
-In some other C compilers, a @code{extern} declaration affects all the
+In some other C compilers, an @code{extern} declaration affects all the
 rest of the file even if it happens within a block.
 
 @item
Index: gcc/doc/gimple.texi
===================================================================
--- gcc/doc/gimple.texi	(revision 146775)
+++ gcc/doc/gimple.texi	(working copy)
@@ -389,7 +389,7 @@
 code falls off the bottom, execution continues after the original
 @code{GIMPLE_TRY_CATCH}.
 
-@item An @code{GIMPLE_EH_FILTER} statement.  This has a list of
+@item A @code{GIMPLE_EH_FILTER} statement.  This has a list of
 permitted exception types, and code to handle a match failure.  If the
 thrown exception does not match one of the allowed types, the
 associated match failure code is executed.  If the thrown exception
@@ -1087,7 +1087,7 @@
 @end deftypefn
  
 @deftypefn {GIMPLE function} bool gimple_assign_cast_p (gimple s)
-Return true if @code{S} is an type-cast assignment.
+Return true if @code{S} is a type-cast assignment.
 @end deftypefn
 
 
Index: gcc/doc/c-tree.texi
===================================================================
--- gcc/doc/c-tree.texi	(revision 146775)
+++ gcc/doc/c-tree.texi	(working copy)
@@ -373,7 +373,7 @@
 
 @item TYPE_NAME
 This macro returns a declaration (in the form of a @code{TYPE_DECL}) for
-the type.  (Note this macro does @emph{not} return a
+the type.  (Note this macro does @emph{not} return an
 @code{IDENTIFIER_NODE}, as you might expect, given its name!)  You can
 look at the @code{DECL_NAME} of the @code{TYPE_DECL} to obtain the
 actual name of the type.  The @code{TYPE_NAME} will be @code{NULL_TREE}
@@ -1256,7 +1256,7 @@
 @findex OVL_NEXT
 
 A function is represented by a @code{FUNCTION_DECL} node.  A set of
-overloaded functions is sometimes represented by a @code{OVERLOAD} node.
+overloaded functions is sometimes represented by an @code{OVERLOAD} node.
 
 An @code{OVERLOAD} node is not a declaration, so none of the
 @samp{DECL_} macros should be used on an @code{OVERLOAD}.  An
@@ -2113,9 +2113,9 @@
 
 These nodes represent fixed-point constants.  The type of these constants
 is obtained with @code{TREE_TYPE}.  @code{TREE_FIXED_CST_PTR} points to
-to struct fixed_value;  @code{TREE_FIXED_CST} returns the structure itself.
-Struct fixed_value contains @code{data} with the size of two
-HOST_BITS_PER_WIDE_INT and @code{mode} as the associated fixed-point
+a @code{struct fixed_value};  @code{TREE_FIXED_CST} returns the structure
+itself.  @code{struct fixed_value} contains @code{data} with the size of two
+@code{HOST_BITS_PER_WIDE_INT} and @code{mode} as the associated fixed-point
 machine mode for @code{data}.
 
 @item COMPLEX_CST
@@ -2569,7 +2569,7 @@
 @smallexample
 int f() @{ return (@{ int j; j = 3; j + 7; @}); @}
 @end smallexample
-In other words, an sequence of statements may occur where a single
+In other words, a sequence of statements may occur where a single
 expression would normally appear.  The @code{STMT_EXPR} node represents
 such an expression.  The @code{STMT_EXPR_STMT} gives the statement
 contained in the expression.  The value of the expression is the value
Index: gcc/doc/tm.texi
===================================================================
--- gcc/doc/tm.texi	(revision 146775)
+++ gcc/doc/tm.texi	(working copy)
@@ -2657,7 +2657,7 @@
 register for stores to some memory locations (e.g., those with symbolic
 address on the RT, and those with certain symbolic address on the SPARC
 when compiling PIC)@.  Scratch registers need not have the same mode
-as the value being copied, and usually hold a different value that
+as the value being copied, and usually hold a different value than
 that being copied.  Special patterns in the md file are needed to
 describe how the copy is performed with the help of the scratch register;
 these patterns also describe the number, register class(es) and mode(s)
@@ -3046,7 +3046,7 @@
 a @samp{Q} constraint can handle any memory operand, because the
 reload pass knows it can be reloaded by copying the memory address
 into a base register if required.  This is analogous to the way
-a @samp{o} constraint can handle any memory operand.
+an @samp{o} constraint can handle any memory operand.
 @end defmac
 
 @defmac EXTRA_ADDRESS_CONSTRAINT (@var{c}, @var{str})
@@ -4317,7 +4317,7 @@
 
 Define this to return an RTX representing the place where a function
 returns or receives a value of data type @var{ret_type}, a tree node
-node representing a data type.  @var{fn_decl_or_type} is a tree node
+representing a data type.  @var{fn_decl_or_type} is a tree node
 representing @code{FUNCTION_DECL} or @code{FUNCTION_TYPE} of a
 function being called.  If @var{outgoing} is false, the hook should
 compute the register in which the caller will see the return value.
@@ -8978,7 +8978,7 @@
 @defmac DBX_OUTPUT_NULL_N_SO_AT_MAIN_SOURCE_FILE_END
 Define this macro @emph{instead of} defining
 @code{DBX_OUTPUT_MAIN_SOURCE_FILE_END}, if what needs to be output at
-the end of compilation is a @code{N_SO} stab with an empty string,
+the end of compilation is an @code{N_SO} stab with an empty string,
 whose value is the highest absolute text address in the file.
 @end defmac
 
Index: gcc/doc/invoke.texi
===================================================================
--- gcc/doc/invoke.texi	(revision 146775)
+++ gcc/doc/invoke.texi	(working copy)
@@ -3152,7 +3152,7 @@
 to @code{int}.  Also warn about any @code{return} statement with no
 return-value in a function whose return-type is not @code{void}
 (falling off the end of the function body is considered returning
-without a value), and about a @code{return} statement with a
+without a value), and about a @code{return} statement with an
 expression in a function whose return-type is @code{void}.
 
 For C++, a function without return type always produces a diagnostic
@@ -6211,8 +6211,8 @@
 @item -fipa-matrix-reorg
 @opindex fipa-matrix-reorg
 Perform matrix flattening and transposing.
-Matrix flattening tries to replace a m-dimensional matrix 
-with its equivalent n-dimensional matrix, where n < m.
+Matrix flattening tries to replace an @math{m}-dimensional matrix
+with its equivalent @math{n}-dimensional matrix, where @math{n < m}.
 This reduces the level of indirection needed for accessing the elements
 of the matrix. The second optimization is matrix transposing that
 attempts to change the order of the matrix's dimensions in order to
@@ -6776,13 +6776,13 @@
 
 @item -fwhole-program
 @opindex fwhole-program
-Assume that the current compilation unit represents whole program being
+Assume that the current compilation unit represents the whole program being
 compiled.  All public functions and variables with the exception of @code{main}
 and those merged by attribute @code{externally_visible} become static functions
-and in a affect gets more aggressively optimized by interprocedural optimizers.
-While this option is equivalent to proper use of @code{static} keyword for
-programs consisting of single file, in combination with option
-@option{--combine} this flag can be used to compile most of smaller scale C
+and in effect are optimized more aggressively by interprocedural optimizers.
+While this option is equivalent to proper use of the @code{static} keyword for
+programs consisting of a single file, in combination with option
+@option{--combine} this flag can be used to compile many smaller scale C
 programs since the functions and variables become local for the whole combined
 compilation unit, not for the single source file itself.
 
@@ -9366,7 +9366,7 @@
 @item -mint8
 @opindex mint8
 Assume int to be 8 bit integer.  This affects the sizes of all types: A
-char will be 1 byte, an int will be 1 byte, an long will be 2 bytes
+char will be 1 byte, an int will be 1 byte, a long will be 2 bytes
 and long long will be 4 bytes.  Please note that this option does not
 comply to the C standards, but it will provide you with smaller code
 size.
@@ -9737,7 +9737,7 @@
 The Darwin tools vary in their behavior when presented with an ISA
 mismatch.  The assembler, @file{as}, will only permit instructions to
 be used that are valid for the subtype of the file it is generating,
-so you cannot put 64-bit instructions in an @samp{ppc750} object file.
+so you cannot put 64-bit instructions in a @samp{ppc750} object file.
 The linker for shared libraries, @file{/usr/bin/libtool}, will fail
 and print an error if asked to create a shared library with a less
 restrictive subtype than its input files (for instance, trying to put
Index: gcc/doc/md.texi
===================================================================
--- gcc/doc/md.texi	(revision 146775)
+++ gcc/doc/md.texi	(working copy)
@@ -552,7 +552,7 @@
 instructs the compiler to first split the insn, and then output the
 resulting instructions separately.  This helps eliminate redundancy in the
 output templates.   If you have a @code{define_insn} that needs to emit
-multiple assembler instructions, and there is an matching @code{define_split}
+multiple assembler instructions, and there is a matching @code{define_split}
 already defined, then you can simply use @code{#} as the output template
 instead of writing an output template that emits the multiple assembler
 instructions.
@@ -3323,7 +3323,7 @@
 @code{define_memory_constraint}, a @samp{Q} constraint can handle any
 memory operand, because @code{reload} knows it can simply copy the
 memory address into a base register if required.  This is analogous to
-the way a @samp{o} constraint can handle any memory operand.
+the way an @samp{o} constraint can handle any memory operand.
 
 The syntax and semantics are otherwise identical to
 @code{define_constraint}.
@@ -4729,7 +4729,7 @@
 A label to jump to if the index has a value outside the bounds.
 @end enumerate
 
-The table is a @code{addr_vec} or @code{addr_diff_vec} inside of a
+The table is an @code{addr_vec} or @code{addr_diff_vec} inside of a
 @code{jump_insn}.  The number of elements in the table is one plus the
 difference between the upper bound and the lower bound.
 
@@ -4949,7 +4949,7 @@
 
 @cindex @code{builtin_setjmp_receiver} instruction pattern
 @item @samp{builtin_setjmp_receiver}
-This pattern, if defined, contains code needed at the site of an
+This pattern, if defined, contains code needed at the site of a
 built-in setjmp that isn't needed at the site of a nonlocal goto.  You
 will not normally need to define this pattern.  A typical reason why you
 might need this pattern is if some value, such as a pointer to a global
@@ -6116,7 +6116,7 @@
 jumps, or simple conditional jump instructions.  Additionally it must attach a
 @code{REG_BR_PROB} note to each conditional jump.  A global variable
 @code{split_branch_probability} holds the probability of the original branch in case
-it was an simple conditional jump, @minus{}1 otherwise.  To simplify
+it was a simple conditional jump, @minus{}1 otherwise.  To simplify
 recomputing of edge frequencies, the new sequence is required to have only
 forward jumps to the newly created labels.
 
Index: gcc/doc/rtl.texi
===================================================================
--- gcc/doc/rtl.texi	(revision 146775)
+++ gcc/doc/rtl.texi	(working copy)
@@ -2950,7 +2950,7 @@
 In some situations, it may be tempting to add a @code{use} of a
 register in a @code{parallel} to describe a situation where the value
 of a special register will modify the behavior of the instruction.
-An hypothetical example might be a pattern for an addition that can
+A hypothetical example might be a pattern for an addition that can
 either wrap around or use saturating addition depending on the value
 of a special control register:
 
@@ -3256,7 +3256,7 @@
 
 When an @code{asm} statement has multiple output values, its insn has
 several such @code{set} RTX's inside of a @code{parallel}.  Each @code{set}
-contains a @code{asm_operands}; all of these share the same assembler
+contains an @code{asm_operands}; all of these share the same assembler
 template and vectors, but each contains the constraint for the respective
 output operand.  They are also distinguished by the output-operand index
 number, which is 0, 1, @dots{} for successive output operands.
@@ -3680,7 +3680,7 @@
 
 @findex REG_LABEL_TARGET
 @item REG_LABEL_TARGET
-This insn is a @code{jump_insn} but not a @code{addr_vec} or
+This insn is a @code{jump_insn} but not an @code{addr_vec} or
 @code{addr_diff_vec}.  It uses @var{op}, a @code{code_label} as a
 direct or indirect jump target.  Its purpose is similar to that of
 @code{REG_LABEL_OPERAND}.  This note is only present if the insn has
@@ -3690,7 +3690,7 @@
 
 @findex REG_CROSSING_JUMP
 @item REG_CROSSING_JUMP
-This insn is an branching instruction (either an unconditional jump or
+This insn is a branching instruction (either an unconditional jump or
 an indirect jump) which crosses between hot and cold sections, which
 could potentially be very far apart in the executable.  The presence
 of this note indicates to other optimizations that this branching
Index: gcc/doc/install.texi
===================================================================
--- gcc/doc/install.texi	(revision 146775)
+++ gcc/doc/install.texi	(working copy)
@@ -464,7 +464,7 @@
 @itemx antlr binary
 
 If you wish to build the @command{gjdoc} binary in libjava, you will
-need to have a @file{antlr.jar} library available. The library is
+need to have an @file{antlr.jar} library available. The library is
 searched in system locations but can be configured with
 @option{--with-antlr-jar=} instead.  When configuring with
 @option{--enable-java-maintainer-mode}, you will need to have one of
@@ -1605,7 +1605,7 @@
 if the directory layouts are different between the system you are building
 GCC on, and the system where you will deploy it.
 
-For example, on a @option{ia64-hp-hpux} system, you may have the GNU
+For example, on an @option{ia64-hp-hpux} system, you may have the GNU
 assembler and linker in @file{/usr/bin}, and the native tools in a
 different path, and build a toolchain that expects to find the
 native tools in @file{/usr/bin}.
@@ -3389,7 +3389,7 @@
 Building @file{libstdc++.a} requires a fix for an AIX Assembler bug
 APAR IY26685 (AIX 4.3) or APAR IY25528 (AIX 5.1).  It also requires a
 fix for another AIX Assembler bug and a co-dependent AIX Archiver fix
-referenced as APAR IY53606 (AIX 5.2) or a APAR IY54774 (AIX 5.1)
+referenced as APAR IY53606 (AIX 5.2) or as APAR IY54774 (AIX 5.1)
 
 @samp{libstdc++} in GCC 3.4 increments the major version number of the
 shared object and GCC installation places the @file{libstdc++.a}
@@ -3944,7 +3944,7 @@
 GCC 3.4 changed the default debugging format from STABS to DWARF-2 for
 32-bit code on Solaris 7 and later.  If you use the Sun assembler, this
 change apparently runs afoul of Sun bug 4910101 (which is referenced as
-a x86-only problem by Sun, probably because they do not use DWARF-2).
+an x86-only problem by Sun, probably because they do not use DWARF-2).
 A symptom of the problem is that you cannot compile C++ programs like
 @command{groff} 1.19.1 without getting messages similar to the following:
 

Re: Trivial grammar fixes in the documentation.

[Joseph S. Myers]

On Sat, 25 Apr 2009, Ralf Wildenhues wrote:

> * Joseph S. Myers wrote on Sat, Apr 25, 2009 at 04:51:05PM CEST:
> > One change to one of your fixes and some other issues noticed in the same 
> > paragraphs:
> 
> Thanks.  Updated patch below, retested "make info pdf html".
> OK?  Do I need approval?

This is OK.  Simple typo fixes do not need approval.

> -For example, on a @option{ia64-hp-hpux} system, you may have the GNU
> +For example, on an @option{ia64-hp-hpux} system, you may have the GNU

Whatever the correct markup for configure triplets is (I guess @samp 
logically, but @code may look better), it's not @option.

-- 
Joseph S. Myers
joseph@codesourcery.com

Re: Trivial grammar fixes in the documentation.

[Ralf Wildenhues]

* Joseph S. Myers wrote on Sun, Apr 26, 2009 at 01:19:57PM CEST:
> On Sat, 25 Apr 2009, Ralf Wildenhues wrote:
> > * Joseph S. Myers wrote on Sat, Apr 25, 2009 at 04:51:05PM CEST:
> > > One change to one of your fixes and some other issues noticed in the same 
> > > paragraphs:
> > 
> > Thanks.  Updated patch below, retested "make info pdf html".
> > OK?  Do I need approval?
> 
> This is OK.  Simple typo fixes do not need approval.

Alright.

> > -For example, on a @option{ia64-hp-hpux} system, you may have the GNU
> > +For example, on an @option{ia64-hp-hpux} system, you may have the GNU
> 
> Whatever the correct markup for configure triplets is (I guess @samp 
> logically, but @code may look better), it's not @option.

I made that @samp, and committed.

Cheers,
Ralf