From: Joern Rennecke <joern.rennecke@embecosm.com>
To: "Joseph S. Myers" <joseph@codesourcery.com>
Cc: gcc-patches@gcc.gnu.org
Subject: Re: RFA: Add makefile for cross-configuration torture test
Date: Wed, 13 Apr 2011 21:02:00 -0000 [thread overview]
Message-ID: <20110413170227.e7wggimm0wo0ko4k-nzlynne@webmail.spamcop.net> (raw)
In-Reply-To: <Pine.LNX.4.64.1104131911080.8645@digraph.polyomino.org.uk>
[-- Attachment #1: Type: text/plain, Size: 789 bytes --]
Quoting "Joseph S. Myers" <joseph@codesourcery.com>:
> I think Interix and SCORE should be included, but probably only one of
> Solaris 8 and Solaris 9 needs to be included for each of x86 and SPARC
> since the targets don't appear significantly different - so no need to
> include Solaris 8 at all if you include Solaris 9 for both x86 and SPARC.
All right, amended patch attached.
> It's up to the people who volunteered to maintain Interix and SCORE to get
> them into a state that builds cleanly - and you can make sure they are
> CC:ed on the relevant bugs and point out that without fixes the targets
> will be removed later in 4.7 development.
Bug 47096 already exists for the Interix failure; no Interix maintainer is
listed in MAINTAINERS.
I've filed Bug 48595 for score-elf.
[-- Attachment #2: config-list-diff2 --]
[-- Type: text/plain, Size: 5244 bytes --]
2010-04-13 Joern Rennecke <joern.rennecke@embecosm.com>
* config-list.mk: New file.
Index: contrib/config-list.mk
===================================================================
--- contrib/config-list.mk (revision 0)
+++ contrib/config-list.mk (revision 0)
@@ -0,0 +1,93 @@
+# Run tests covering all config.gcc cases.
+host_options='--with-mpc=/opt/cfarm/mpc' # gcc10
+# Make sure you have a recent enough gcc (with ada support) in your path so
+# that --enable-werror-always will work.
+# To use, create a sibling directory to the gcc sources and cd into this.
+# Use -j / -l make arguments and nice to assure a smooth resource-efficient
+# load on the build machine, e.g. for 24 cores:
+# svn co svn://gcc.gnu.org/svn/gcc/branches/foo-branch gcc
+# mkdir multi-mk; cd multi-mk
+# nohup nice make -j25 -l36 -f ../gcc/contrib/config-list.mk > make.out 2>&1 &
+#
+# v850e1-elf is rejected by config.sub
+LIST = alpha-linux-gnu alpha-freebsd6 alpha-netbsd alpha-openbsd \
+ alpha-dec-osf5.1 alpha64-dec-vms alpha-dec-vms am33_2.0-linux \
+ arm-wrs-vxworks arm-freebsd6 arm-netbsdelf arm-linux \
+ arm-linux-androideabi arm-uclinux_eabi arm-ecos-elf arm-eabi \
+ arm-symbianelf arm-rtems arm-elf arm-wince-pe avr-rtems avr-elf \
+ bfin-elf bfin-uclinux bfin-linux-uclibc bfin-rtems bfin-openbsd \
+ cris-elf cris-linux crisv32-elf crisv32-linux fido-elf \
+ fr30-elf frv-elf frv-linux h8300-elf h8300-rtems hppa-linux-gnu \
+ hppa-linux-gnuOPT-enable-sjlj-exceptions=yes hppa64-linux-gnu \
+ hppa2.0-hpux10.1 hppa64-hpux11.3 \
+ hppa64-hpux11.0OPT-enable-sjlj-exceptions=yes hppa2.0-hpux11.9 \
+ i686-pc-linux-gnu i686-apple-darwin i686-apple-darwin9 i686-apple-darwin10 \
+ i486-freebsd4 i686-freebsd6 i686-kfreebsd-gnu \
+ i686-netbsdelf9 i686-knetbsd-gnu i686-openbsd i686-openbsd3.0 \
+ i686-elf i686-kopensolaris-gnu i686-symbolics-gnu i686-pc-msdosdjgpp \
+ i686-lynxos i586-netwareOPT-with-ld=SCRIPTSnwld i686-nto-qnx \
+ i686-rtems i686-solaris2.10 i686-wrs-vxworks \
+ i686-wrs-vxworksae \
+ i686-cygwinOPT-enable-threads=yes i686-mingw32crt ia64-elf \
+ ia64-freebsd6 ia64-linux ia64-hpux ia64-hp-vms iq2000-elf lm32-elf \
+ lm32-rtems lm32-uclinux m32c-rtems m32c-elf m32r-elf m32rle-elf m32r-rtems \
+ m32r-linux m32rle-linux m68k-elf m68k-netbsdelf \
+ m68k-openbsd m68k-uclinux m68k-linux m68k-rtems \
+ mcore-elf mep-elf microblaze-linux microblaze-elf \
+ mips-sgi-irix6.5OPT-with-stabsOPT-enable-threads=posix mips-netbsd \
+ mips64el-st-linux-gnu mips64octeon-linux mipsisa64r2-linux \
+ mipsisa32r2-linux-gnu mips-openbsd mipsisa64r2-sde-elf mipsisa32-elfoabi \
+ mipsisa64-elfoabi mipsisa64r2el-elf mipsisa64sr71k-elf mipsisa64sb1-elf \
+ mipsel-elf mips64-elf mips64vr-elf mips64orion-elf mips-rtems \
+ mips-wrs-vxworks mipstx39-elf mmix-knuth-mmixware mn10300-elf moxie-elf \
+ moxie-uclinux moxie-rtems pdp11-aout picochip-elf powerpc-darwin8 \
+ powerpc-darwin7 powerpc64-darwin powerpc-freebsd6 powerpc-netbsd \
+ powerpc-eabispe powerpc-eabisimaltivec powerpc-eabisim ppc-elf \
+ powerpc-eabialtivec powerpc-xilinx-eabi powerpc-eabi \
+ powerpc-rtems4.11OPT-enable-threads=yes powerpc-linux_spe \
+ powerpc-linux_paired powerpc64-linux_altivec \
+ powerpc-wrs-vxworks powerpc-wrs-vxworksae powerpc-lynxos powerpcle-elf \
+ powerpcle-eabisim powerpcle-eabi rs6000-ibm-aix4.3 rs6000-ibm-aix5.1.0 \
+ rs6000-ibm-aix5.2.0 rs6000-ibm-aix5.3.0 rs6000-ibm-aix6.0 \
+ rx-elf s390-linux-gnu s390x-linux-gnu s390x-ibm-tpf sh-elf \
+ shle-linux sh-netbsdelf sh-superh-elf sh5el-netbsd sh64-netbsd sh64-linux \
+ sh64-elfOPT-with-newlib sh-rtems sh-wrs-vxworks sparc-elf \
+ sparc-leon-elf sparc-rtems sparc-linux-gnu \
+ sparc-leon3-linux-gnuOPT-enable-target=all sparc-netbsdelf \
+ sparc64-sun-solaris2.10OPT-with-gnu-ldOPT-with-gnu-asOPT-enable-threads=posix \
+ sparc-wrs-vxworks sparc64-elf sparc64-rtems sparc64-linux sparc64-freebsd6 \
+ sparc64-netbsd sparc64-openbsd spu-elf v850e-elf v850-elf vax-linux-gnu \
+ vax-netbsdelf vax-openbsd x86_64-apple-darwin \
+ x86_64-pc-linux-gnuOPT-with-fpmath=avx \
+ x86_64-elfOPT-with-fpmath=sse x86_64-freebsd6 x86_64-netbsd \
+ x86_64-knetbsd-gnu x86_64-w64-mingw32 \
+ x86_64-mingw32OPT-enable-sjlj-exceptions=yes xstormy16-elf xtensa-elf \
+ xtensa-linux sparc-sun-solaris2.9 i686-solaris2.9 \
+ i686-interix3OPT-enable-obsolete score-elfOPT-enable-obsolete
+
+all: $(LIST)
+
+.PHONEY: make-log-dir make-script-dir
+
+empty=
+
+#Check for the presence of the MAINTAINERS file to make sure we are in a
+#suitable current working direcrory.
+make-log-dir: ../gcc/MAINTAINERS
+ mkdir log
+
+# The 'ix86-netware --with-ld=nwld' configuration needs a nwld executable to
+# configure. See PR47104.
+make-script-dir:
+ mkdir scripts
+ echo ld $* > scripts/nwld
+ chmod u+x scripts/nwld
+
+$(LIST): make-log-dir make-script-dir
+ -mkdir $@
+ (cd $@ && \
+ ../../gcc/configure \
+ --target=$(subst SCRIPTS,`pwd`/../scripts/,$(subst OPT,$(empty) -,$@)) \
+ --enable-werror-always ${host_options} --enable-languages=all,ada,go) \
+ > log/$@-config.out 2>&1
+ -$(MAKE) -C $@ all-gcc > log/$@-make.out 2>&1 && rm -r $@
next prev parent reply other threads:[~2011-04-13 21:02 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-04-13 15:50 Joern Rennecke
2011-04-13 16:07 ` Rainer Orth
2011-04-13 16:24 ` Joern Rennecke
2011-04-13 16:27 ` Joseph S. Myers
[not found] ` <20110413140647.provnjxog4og0o84-nzlynne@webmail.spamcop.net>
[not found] ` <Pine.LNX.4.64.1104131911080.8645@digraph.polyomino.org.uk>
2011-04-13 21:02 ` Joern Rennecke [this message]
2011-04-13 22:10 ` Joseph S. Myers
2011-04-13 22:15 ` Douglas B Rupp
2011-04-14 5:51 ` Ralf Wildenhues
2011-04-14 8:12 ` Joern Rennecke
2011-04-14 14:15 ` Jan-Benedict Glaw
2011-04-23 12:14 ` Joern Rennecke
2011-04-23 15:23 ` Patch ping: " Joern Rennecke
2011-05-02 17:20 ` Patch ping^2: " Joern Rennecke
2011-05-04 3:19 ` Alexandre Oliva
2023-02-10 10:16 ` [GCC] In 'contrib/config-list.mk', clarify i686-symbolics-gnu to i686-gnu (was: RFA: Add makefile for cross-configuration torture test) Thomas Schwinge
2023-05-06 11:50 ` [PATCH] hurd: Add multilib paths for gnu-x86_64 Samuel Thibault
2023-05-06 13:26 ` Samuel Thibault
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20110413170227.e7wggimm0wo0ko4k-nzlynne@webmail.spamcop.net \
--to=joern.rennecke@embecosm.com \
--cc=gcc-patches@gcc.gnu.org \
--cc=joseph@codesourcery.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).