These patches are primarily infrastructure patches patches, that adds the
switches the following patches will use.  I also added the new constraints and
predicates that will be used by future patches.

At this point of development, I have multiple switches for different
sub-features.  I could reduce the number of documented switches down to just
one or two, like we did in the power7 time frame if desired.

2013-05-17  Michael Meissner  <meissner@linux.vnet.ibm.com>
	    Pat Haugen <pthaugen@us.ibm.com>
	    Peter Bergner <bergner@vnet.ibm.com>

	* doc/invoke.texi (Option Summary): Add power8 options.
	(RS/6000 and PowerPC Options): Likewise.

	* doc/md.texi (PowerPC and IBM RS6000 constraints): Update to use
	constraints.md instead of rs6000.h.  Reorder w* constraints.  Add
	wm, wn, wr documentation.

	* gcc/config/rs6000/constraints.md (wm): New constraint for VSX
	registers if direct move instructions are enabled.
	(wn): New constraint for no registers.
	(wq): New constraint for quad word even GPR registers.
	(wr): New constraint if 64-bit instructions are enabled.
	(wv): New constraint if power8 vector instructions are enabled.
	(wQ): New constraint for quad word memory locations.

	* gcc/config/rs6000/predicates.md (const_0_to_15_operand): New
	constraint for 0..15 for crypto instructions.
	(gpc_reg_operand): If VSX allow registers in VSX registers as well
	as GPR and floating point registers.
	(int_reg_operand): New predicate to match only GPR registers.
	(base_reg_operand): New predicate to match base registers.
	(quad_int_reg_operand): New predicate to match even GPR registers
	for quad memory operations.
	(vsx_reg_or_cint_operand): New predicate to allow vector logical
	operations in both GPR and VSX registers.
	(quad_memory_operand): New predicate for quad memory operations.
	(reg_or_indexed_operand): New predicate for direct move support.

	* gcc/config/rs6000/rs6000-cpus.def (ISA_2_5_MASKS_EMBEDDED):
	Inherit from ISA_2_4_MASKS, not ISA_2_2_MASKS.
	(ISA_2_7_MASKS_SERVER): New mask for ISA 2.07 (i.e. power8).
	(POWERPC_MASKS): Add power8 options.
	(power8 cpu): Use ISA_2_7_MASKS_SERVER instead of specifying the
	various options.

	* gcc/config/rs6000/rs6000-c.c (rs6000_target_modify_macros):
	Define _ARCH_PWR8 and __POWER8_VECTOR__ for power8.

	* gcc/config/rs6000/rs6000.opt (-mvsx-timode): Add documentation.
	(-mpower8-fusion): New power8 options.
	(-mpower8-fusion-sign): Likewise.
	(-mpower8-vector): Likewise.
	(-mcrypto): Likewise.
	(-mdirect-move): Likewise.
	(-mquad-memory): Likewise.

	* gcc/config/rs6000/rs6000.c (power8_cost): Initial definition for
	power8.
	(rs6000_hard_regno_mode_ok): Make PTImode only match even GPR
	registers.
	(rs6000_debug_reg_print): Print the base register class if
	-mdebug=reg.
	(rs6000_debug_vector_unit): Add p8_vector.
	(rs6000_debug_reg_global): If -mdebug=reg, print power8 constraint
	definitions.  Also print fusion state.
	(rs6000_init_hard_regno_mode_ok): Set up power8 constraints.
	(rs6000_builtin_mask_calculate): Add power8 builtin support.
	(rs6000_option_override_internal): Add support for power8.
	(rs6000_common_init_builtins): Add debugging for skipped builtins
	if -mdebug=builtin.
	(rs6000_adjust_cost): Add power8 support.
	(rs6000_issue_rate): Likewise.
	(insn_must_be_first_in_group): Likewise.
	(insn_must_be_last_in_group): Likewise.
	(force_new_group): Likewise.
	(rs6000_register_move_cost): Likewise.
	(rs6000_opt_masks): Likewise.

	* config/rs6000/rs6000.h (ASM_CPU_POWER8_SPEC): If we don't have a
	power8 capable assembler, default to power7 options.
	(TARGET_DIRECT_MOVE): Likewise.
	(TARGET_CRYPTO): Likewise.
	(TARGET_P8_VECTOR): Likewise.
	(VECTOR_UNIT_P8_VECTOR_P): Define power8 vector support.
	(VECTOR_UNIT_VSX_OR_P8_VECTOR_P): Likewise.
	(VECTOR_MEM_P8_VECTOR_P): Likewise.
	(VECTOR_MEM_VSX_OR_P8_VECTOR_P): Likewise.
	(VECTOR_MEM_ALTIVEC_OR_VSX_P): Likewise.
	(TARGET_XSCVDPSPN): Likewise.
	(TARGET_XSCVSPDPN): Likewsie.
	(TARGET_SYNC_HI_QI): Likewise.
	(TARGET_SYNC_TI): Likewise.
	(MASK_CRYPTO): Likewise.
	(MASK_DIRECT_MOVE): Likewise.
	(MASK_P8_FUSION): Likewise.
	(MASK_P8_VECTOR): Likewise.
	(REG_ALLOC_ORDER): Move fr13 to be lower in priority so that the
	TFmode temporary used by some of the direct move instructions to
	get two FP temporary registers does not force creation of a stack
	frame.
	(VLOGICAL_REGNO_P): Allow vector logical operations in GPRs.
	(MODES_TIEABLE_P): Move the VSX tests above the Altivec tests so
	that any VSX registers are tieable, even if they are also an
	Altivec vector mode.
	(r6000_reg_class_enum): Add wm, wq, wr, wv constraints.
	(RS6000_BTM_P8_VECTOR): Power8 builtin support.
	(RS6000_BTM_CRYPTO): Likewise.
	(RS6000_BTM_COMMON): Likewise.

	* config/rs6000/rs6000.md (cpu attribute): Add power8.
	* config/rs6000/rs6000-opts.h (PROCESSOR_POWER8): Likewise.
	(enum rs6000_vector): Add power8 vector support.

-- 
Michael Meissner, IBM
IBM, M/S 2506R, 550 King Street, Littleton, MA 01460, USA
email: meissner@linux.vnet.ibm.com, phone: +1 (978) 899-4797