From: Martin Jambor <mjambor@suse.cz>
To: gcc-patches@gcc.gnu.org
Subject: Re: [hsa merge 10/10] HSA register allocator
Date: Fri, 15 Jan 2016 15:09:00 -0000 [thread overview]
Message-ID: <20160115150924.GN3982@virgil.suse.cz> (raw)
In-Reply-To: <20160114144134.GL3017@tucnak.redhat.com>
Hi,
On Thu, Jan 14, 2016 at 03:41:34PM +0100, Jakub Jelinek wrote:
> On Wed, Jan 13, 2016 at 06:39:35PM +0100, Martin Jambor wrote:
> > + for (phi = hbb->m_first_phi;
> > + phi;
> > + phi = phi->m_next ? as_a <hsa_insn_phi *> (phi->m_next): NULL)
>
> Space before :
>
> Ok with that change.
>
I have committed the following patch from Martin to address this and a
few other code style issues.
Thanks,
Martin
2016-01-15 Martin Liska <mliska@suse.cz>
* hsa-regalloc.c (naive_outof_ssa): Fixed coding style.
(linear_scan_regalloc): Likewise.
(regalloc): Likewise.
---
gcc/hsa-regalloc.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/gcc/hsa-regalloc.c b/gcc/hsa-regalloc.c
index 5a42beb..f8e83ecf 100644
--- a/gcc/hsa-regalloc.c
+++ b/gcc/hsa-regalloc.c
@@ -90,7 +90,7 @@ naive_outof_ssa (void)
for (phi = hbb->m_first_phi;
phi;
- phi = phi->m_next ? as_a <hsa_insn_phi *> (phi->m_next): NULL)
+ phi = phi->m_next ? as_a <hsa_insn_phi *> (phi->m_next) : NULL)
naive_process_phi (phi);
/* Zap PHI nodes, they will be deallocated when everything else will. */
@@ -525,7 +525,7 @@ linear_scan_regalloc (struct m_reg_class_desc *classes)
else
after_end_number = insn_order;
/* Everything live-out in this BB has at least an end point
- after us. */
+ after us. */
EXECUTE_IF_SET_IN_BITMAP (hbb->m_liveout, 0, bit, bi)
note_lr_end (ind2reg[bit], after_end_number);
@@ -549,7 +549,7 @@ linear_scan_regalloc (struct m_reg_class_desc *classes)
}
/* Everything live-in in this BB has a start point before
- our first insn. */
+ our first insn. */
int before_start_number;
if (hbb->m_first_insn)
before_start_number = hbb->m_first_insn->m_number;
@@ -570,7 +570,7 @@ linear_scan_regalloc (struct m_reg_class_desc *classes)
are defined at the start of the routine (prologue). */
if (ind2reg[i]->m_lr_begin == insn_order)
ind2reg[i]->m_lr_begin = 0;
- /* All regs that have no use but a def will have lr_end == 0,
+ /* All regs that have no use but a def will have lr_end == 0,
they are actually live from def until after the insn they are
defined in. */
if (ind2reg[i]->m_lr_end == 0)
@@ -672,7 +672,7 @@ regalloc (void)
basic_block bb;
m_reg_class_desc classes[4];
- /* If there are no registers used in the function, exit right away. */
+ /* If there are no registers used in the function, exit right away. */
if (hsa_cfun->m_reg_count == 0)
return;
--
2.6.4
next prev parent reply other threads:[~2016-01-15 15:09 UTC|newest]
Thread overview: 77+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-01-13 17:55 [hsa merge 00/10] Merge of HSA branch Martin Jambor
2016-01-13 17:55 ` [hsa merge 06/10] Pass manager changes Martin Jambor
2016-01-14 12:52 ` Jakub Jelinek
2016-01-13 17:55 ` [hsa merge 03/10] HSA libgomp plugin Martin Jambor
2016-01-14 12:37 ` Jakub Jelinek
2016-01-13 17:55 ` [hsa merge 07/10] IPA-HSA pass Martin Jambor
2016-01-14 12:59 ` Jakub Jelinek
2016-01-15 11:48 ` Martin Liška
2016-01-15 14:53 ` Martin Jambor
2016-01-15 15:01 ` Jakub Jelinek
2016-01-15 16:02 ` Martin Jambor
2016-01-15 16:10 ` Jakub Jelinek
2016-01-15 16:38 ` Ilya Verbin
2016-01-15 16:45 ` Jakub Jelinek
2016-01-15 18:06 ` Ilya Verbin
2016-01-20 18:54 ` Ilya Verbin
2016-01-21 11:39 ` Alexander Monakov
2016-01-22 10:19 ` Jakub Jelinek
2016-01-28 11:36 ` Partial Offloading (was: [hsa merge 07/10] IPA-HSA pass) Thomas Schwinge
2016-02-17 16:41 ` Ilya Verbin
2016-01-15 19:19 ` [hsa merge 07/10] IPA-HSA pass Alexander Monakov
2016-01-15 19:32 ` Jakub Jelinek
2016-01-15 19:46 ` Alexander Monakov
2016-01-15 19:55 ` Jakub Jelinek
2016-01-15 9:52 ` Jan Hubicka
2016-01-15 11:47 ` Martin Liška
2016-01-16 10:00 ` Jan Hubicka
2016-01-25 15:22 ` Martin Liška
2016-01-25 15:24 ` Jakub Jelinek
2016-01-25 23:41 ` Jan Hubicka
2016-01-27 12:38 ` Martin Liška
2016-01-13 17:55 ` [hsa merge 02/10] Modifications to libgomp proper Martin Jambor
2016-01-20 13:37 ` Ilya Verbin
2016-01-20 14:48 ` Ilya Verbin
2016-01-20 14:55 ` Jakub Jelinek
2016-01-13 17:55 ` [hsa merge 04/10] Avoid extraneous remapping in copy_gimple_seq_and_replace_locals Martin Jambor
2016-01-13 18:02 ` Jakub Jelinek
2016-01-13 17:55 ` [hsa merge 10/10] HSA register allocator Martin Jambor
2016-01-14 14:41 ` Jakub Jelinek
2016-01-15 15:09 ` Martin Jambor [this message]
2016-01-13 17:55 ` [hsa merge 01/10] Configury changes and new options Martin Jambor
2016-01-14 12:35 ` Jakub Jelinek
2016-02-02 12:53 ` Thomas Schwinge
2016-01-13 18:11 ` [hsa merge 09/10] Majority of the HSA back-end Martin Jambor
2016-01-14 14:05 ` Jakub Jelinek
2016-01-15 15:08 ` Martin Jambor
2016-01-15 15:18 ` Jakub Jelinek
2016-01-15 23:49 ` Martin Jambor
2016-01-16 8:58 ` Jakub Jelinek
2016-01-16 9:23 ` Jakub Jelinek
2016-01-18 15:33 ` Martin Jambor
2016-01-18 15:48 ` Jakub Jelinek
2016-01-13 18:12 ` [hsa merge 08/10] HSAIL BRIG description header file Martin Jambor
2016-01-14 13:04 ` Jakub Jelinek
2016-01-15 1:19 ` Ian Lance Taylor
2016-01-15 10:03 ` Richard Biener
2016-01-15 10:14 ` Martin Jambor
2016-01-15 10:17 ` Richard Biener
2016-01-15 10:37 ` Jakub Jelinek
2016-01-15 12:03 ` Jakub Jelinek
2016-01-15 17:23 ` Martin Jambor
2016-01-16 11:43 ` Jakub Jelinek
2016-01-18 15:22 ` Martin Jambor
2016-01-15 17:53 ` Mike Stump
2016-01-15 20:23 ` Richard Biener
2016-02-26 18:58 ` Martin Jambor
2016-02-26 19:28 ` Mike Stump
2016-01-13 18:17 ` [hsa merge 05/10] OpenMP lowering/expansion changes (gridification) Martin Jambor
2016-01-14 12:52 ` Jakub Jelinek
2016-01-15 14:52 ` Martin Jambor
2016-01-14 14:22 ` Alexander Monakov
2016-01-19 10:45 ` [hsa merge 00/10] Merge of HSA branch Martin Jambor
2016-01-19 14:25 ` Richard Biener
2016-01-21 23:10 ` Gerald Pfeifer
2016-01-27 14:20 ` Martin Jambor
2016-01-28 15:18 ` Gerald Pfeifer
2016-02-02 14:20 ` Martin Jambor
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160115150924.GN3982@virgil.suse.cz \
--to=mjambor@suse.cz \
--cc=gcc-patches@gcc.gnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).