From: Jonathan Wakely <jwakely@redhat.com>
To: libstdc++@gcc.gnu.org, gcc-patches@gcc.gnu.org
Subject: [committed 2/3] libstdc++: Stop using _GLIBCXX_USE_C99_STDINT_TR1 in <cstdint>
Date: Tue, 16 May 2023 10:11:31 +0100 [thread overview]
Message-ID: <20230516091132.1698684-2-jwakely@redhat.com> (raw)
In-Reply-To: <20230516091132.1698684-1-jwakely@redhat.com>
Tested powerpc64le-linux. Pushed to trunk.
-- >8 --
The _GLIBCXX_USE_C99_STDINT_TR1 macro (and the comments about it in
acinclude.m4 and config.h) are misleading when it is also used for
<stdint>, not only <tr1/stdint>. It is also wrong, because the
configure checks for TR1 use -std=c++98 and a target might define
uint32_t etc. for C++11 but not for C++98.
Add a separate configure check for the <stdint.h> types using -std=c++11
for the checks. Use the result of that separate check in <cstdint> and
most other places that still depend on the macro (many uses of that
macro have been removed already). The remaining uses of the STDINT_TR1
macro are really for TR1, or are in the src/c++11/compatibility-*.cc
files, where we don't want/need to change the condition they depend on
(if those symbols were only exported when <stdint.h> types were
available for -std=c++98, then that's the condition we should continue
to use for whether to export the compat symbols now).
Make similar changes for the related _GLIBCXX_USE_C99_INTTYPES_TR1 and
_GLIBCXX_USE_C99_INTTYPES_WCHAR_T_TR1 macros, adding new macros for
non-TR1 uses.
libstdc++-v3/ChangeLog:
* acinclude.m4 (GLIBCXX_USE_C99): Check for <stdint.h> types in
C++11 mode and define _GLIBCXX_USE_C99_STDINT. Check for
<inttypes.h> features in C++11 mode and define
_GLIBCXX_USE_C99_INTTYPES and _GLIBCXX_USE_C99_INTTYPES_WCHAR_T.
* config.h.in: Regenerate.
* configure: Regenerate.
* doc/doxygen/user.cfg.in (PREDEFINED): Add new macros.
* include/bits/chrono.h: Check _GLIBCXX_USE_C99_STDINT instead
of _GLIBCXX_USE_C99_STDINT_TR1.
* include/c_compatibility/inttypes.h: Check
_GLIBCXX_USE_C99_INTTYPES and _GLIBCXX_USE_C99_INTTYPES_WCHAR_T
instead of _GLIBCXX_USE_C99_INTTYPES_TR1 and
_GLIBCXX_USE_C99_INTTYPES_WCHAR_T_TR1.
* include/c_compatibility/stdatomic.h: Check
_GLIBCXX_USE_C99_STDINT instead of _GLIBCXX_USE_C99_STDINT_TR1.
* include/c_compatibility/stdint.h: Likewise.
* include/c_global/cinttypes: Check _GLIBCXX_USE_C99_INTTYPES
and _GLIBCXX_USE_C99_INTTYPES_WCHAR_T instead of
_GLIBCXX_USE_C99_INTTYPES_TR1 and
_GLIBCXX_USE_C99_INTTYPES_WCHAR_T_TR1.
* include/c_global/cstdint: Check _GLIBCXX_USE_C99_STDINT
instead of _GLIBCXX_USE_C99_STDINT_TR1.
* include/std/atomic: Likewise.
* src/c++11/cow-stdexcept.cc: Likewise.
* testsuite/29_atomics/headers/stdatomic.h/c_compat.cc:
Likewise.
* testsuite/lib/libstdc++.exp (check_v3_target_cstdint):
Likewise.
---
libstdc++-v3/acinclude.m4 | 142 +++++++++++++
libstdc++-v3/config.h.in | 12 ++
libstdc++-v3/configure | 196 ++++++++++++++++++
libstdc++-v3/doc/doxygen/user.cfg.in | 3 +
libstdc++-v3/include/bits/chrono.h | 2 +-
.../include/c_compatibility/inttypes.h | 6 +-
.../include/c_compatibility/stdatomic.h | 4 +-
libstdc++-v3/include/c_compatibility/stdint.h | 4 +-
libstdc++-v3/include/c_global/cinttypes | 6 +-
libstdc++-v3/include/c_global/cstdint | 6 +-
libstdc++-v3/include/std/atomic | 2 +-
libstdc++-v3/src/c++11/cow-stdexcept.cc | 4 +-
| 2 +-
libstdc++-v3/testsuite/lib/libstdc++.exp | 2 +-
14 files changed, 372 insertions(+), 19 deletions(-)
diff --git a/libstdc++-v3/acinclude.m4 b/libstdc++-v3/acinclude.m4
index 84b12adbc24..0c01b526ebf 100644
--- a/libstdc++-v3/acinclude.m4
+++ b/libstdc++-v3/acinclude.m4
@@ -1103,6 +1103,148 @@ AC_DEFUN([GLIBCXX_ENABLE_C99], [
])
fi
+ # Check for the existence of <stdint.h> types.
+ AC_CACHE_CHECK([for ISO C99 support in <stdint.h> for C++11],
+ glibcxx_cv_c99_stdint, [
+ AC_TRY_COMPILE([#define __STDC_LIMIT_MACROS
+ #define __STDC_CONSTANT_MACROS
+ #include <stdint.h>],
+ [typedef int8_t my_int8_t;
+ my_int8_t i8 = INT8_MIN;
+ i8 = INT8_MAX;
+ typedef int16_t my_int16_t;
+ my_int16_t i16 = INT16_MIN;
+ i16 = INT16_MAX;
+ typedef int32_t my_int32_t;
+ my_int32_t i32 = INT32_MIN;
+ i32 = INT32_MAX;
+ typedef int64_t my_int64_t;
+ my_int64_t i64 = INT64_MIN;
+ i64 = INT64_MAX;
+ typedef int_fast8_t my_int_fast8_t;
+ my_int_fast8_t if8 = INT_FAST8_MIN;
+ if8 = INT_FAST8_MAX;
+ typedef int_fast16_t my_int_fast16_t;
+ my_int_fast16_t if16 = INT_FAST16_MIN;
+ if16 = INT_FAST16_MAX;
+ typedef int_fast32_t my_int_fast32_t;
+ my_int_fast32_t if32 = INT_FAST32_MIN;
+ if32 = INT_FAST32_MAX;
+ typedef int_fast64_t my_int_fast64_t;
+ my_int_fast64_t if64 = INT_FAST64_MIN;
+ if64 = INT_FAST64_MAX;
+ typedef int_least8_t my_int_least8_t;
+ my_int_least8_t il8 = INT_LEAST8_MIN;
+ il8 = INT_LEAST8_MAX;
+ typedef int_least16_t my_int_least16_t;
+ my_int_least16_t il16 = INT_LEAST16_MIN;
+ il16 = INT_LEAST16_MAX;
+ typedef int_least32_t my_int_least32_t;
+ my_int_least32_t il32 = INT_LEAST32_MIN;
+ il32 = INT_LEAST32_MAX;
+ typedef int_least64_t my_int_least64_t;
+ my_int_least64_t il64 = INT_LEAST64_MIN;
+ il64 = INT_LEAST64_MAX;
+ typedef intmax_t my_intmax_t;
+ my_intmax_t im = INTMAX_MAX;
+ im = INTMAX_MIN;
+ typedef intptr_t my_intptr_t;
+ my_intptr_t ip = INTPTR_MAX;
+ ip = INTPTR_MIN;
+ typedef uint8_t my_uint8_t;
+ my_uint8_t ui8 = UINT8_MAX;
+ ui8 = UINT8_MAX;
+ typedef uint16_t my_uint16_t;
+ my_uint16_t ui16 = UINT16_MAX;
+ ui16 = UINT16_MAX;
+ typedef uint32_t my_uint32_t;
+ my_uint32_t ui32 = UINT32_MAX;
+ ui32 = UINT32_MAX;
+ typedef uint64_t my_uint64_t;
+ my_uint64_t ui64 = UINT64_MAX;
+ ui64 = UINT64_MAX;
+ typedef uint_fast8_t my_uint_fast8_t;
+ my_uint_fast8_t uif8 = UINT_FAST8_MAX;
+ uif8 = UINT_FAST8_MAX;
+ typedef uint_fast16_t my_uint_fast16_t;
+ my_uint_fast16_t uif16 = UINT_FAST16_MAX;
+ uif16 = UINT_FAST16_MAX;
+ typedef uint_fast32_t my_uint_fast32_t;
+ my_uint_fast32_t uif32 = UINT_FAST32_MAX;
+ uif32 = UINT_FAST32_MAX;
+ typedef uint_fast64_t my_uint_fast64_t;
+ my_uint_fast64_t uif64 = UINT_FAST64_MAX;
+ uif64 = UINT_FAST64_MAX;
+ typedef uint_least8_t my_uint_least8_t;
+ my_uint_least8_t uil8 = UINT_LEAST8_MAX;
+ uil8 = UINT_LEAST8_MAX;
+ typedef uint_least16_t my_uint_least16_t;
+ my_uint_least16_t uil16 = UINT_LEAST16_MAX;
+ uil16 = UINT_LEAST16_MAX;
+ typedef uint_least32_t my_uint_least32_t;
+ my_uint_least32_t uil32 = UINT_LEAST32_MAX;
+ uil32 = UINT_LEAST32_MAX;
+ typedef uint_least64_t my_uint_least64_t;
+ my_uint_least64_t uil64 = UINT_LEAST64_MAX;
+ uil64 = UINT_LEAST64_MAX;
+ typedef uintmax_t my_uintmax_t;
+ my_uintmax_t uim = UINTMAX_MAX;
+ uim = UINTMAX_MAX;
+ typedef uintptr_t my_uintptr_t;
+ my_uintptr_t uip = UINTPTR_MAX;
+ uip = UINTPTR_MAX;
+ ],[glibcxx_cv_c99_stdint=yes],
+ [glibcxx_cv_c99_stdint=no])
+ ])
+ if test x"$glibcxx_cv_c99_stdint" = x"yes"; then
+ AC_DEFINE(_GLIBCXX_USE_C99_STDINT, 1,
+ [Define if C99 types in <stdint.h> should be imported in
+ <cstdint> in namespace std for C++11.])
+ fi
+
+ # Check for the existence of <inttypes.h> functions (NB: doesn't make
+ # sense if the glibcxx_cv_c99_stdint check fails, per C99, 7.8/1).
+ ac_c99_inttypes=no;
+ if test x"$glibcxx_cv_c99_stdint" = x"yes"; then
+ AC_MSG_CHECKING([for ISO C99 support for C++11 in <inttypes.h>])
+ AC_TRY_COMPILE([#include <inttypes.h>],
+ [intmax_t i, numer, denom, base;
+ const char* s;
+ char** endptr;
+ intmax_t ret = imaxabs(i);
+ imaxdiv_t dret = imaxdiv(numer, denom);
+ ret = strtoimax(s, endptr, base);
+ uintmax_t uret = strtoumax(s, endptr, base);
+ ],[ac_c99_inttypes=yes], [ac_c99_inttypes=no])
+ AC_MSG_RESULT($ac_c99_inttypes)
+ fi
+ if test x"$ac_c99_inttypes" = x"yes"; then
+ AC_DEFINE(_GLIBCXX_USE_C99_INTTYPES, 1,
+ [Define if C99 functions in <inttypes.h> should be imported in
+ <cinttypes> in namespace std in C++11.])
+ fi
+
+ # Check for the existence of wchar_t <inttypes.h> functions (NB: doesn't
+ # make sense if the glibcxx_cv_c99_stdint check fails, per C99, 7.8/1).
+ ac_c99_inttypes_wchar_t=no;
+ if test x"$glibcxx_cv_c99_stdint" = x"yes"; then
+ AC_MSG_CHECKING([for wchar_t ISO C99 support for C++11 in <inttypes.h>])
+ AC_TRY_COMPILE([#include <inttypes.h>],
+ [intmax_t base;
+ const wchar_t* s;
+ wchar_t** endptr;
+ intmax_t ret = wcstoimax(s, endptr, base);
+ uintmax_t uret = wcstoumax(s, endptr, base);
+ ],[ac_c99_inttypes_wchar_t=yes],
+ [ac_c99_inttypes_wchar_t=no])
+ AC_MSG_RESULT($ac_c99_inttypes_wchar_t)
+ fi
+ if test x"$ac_c99_inttypes_wchar_t" = x"yes"; then
+ AC_DEFINE(_GLIBCXX_USE_C99_INTTYPES_WCHAR_T, 1,
+ [Define if wchar_t C99 functions in <inttypes.h> should be
+ imported in <cinttypes> in namespace std in C++11.])
+ fi
+
# Check for the existence of <math.h> functions used if C99 is enabled.
AC_CACHE_CHECK([for ISO C99 support in <math.h> for C++11],
glibcxx_cv_c99_math_cxx11, [
diff --git a/libstdc++-v3/doc/doxygen/user.cfg.in b/libstdc++-v3/doc/doxygen/user.cfg.in
index 210e13400b9..0905e0f48f2 100644
--- a/libstdc++-v3/doc/doxygen/user.cfg.in
+++ b/libstdc++-v3/doc/doxygen/user.cfg.in
@@ -2353,6 +2353,9 @@ PREDEFINED = __cplusplus=202002L \
_GLIBCXX_USE_WCHAR_T \
_GLIBCXX_USE_LONG_LONG \
_GLIBCXX_USE_C99_COMPLEX_ARC \
+ _GLIBCXX_USE_C99_INTTYPES \
+ _GLIBCXX_USE_C99_INTTYPES_WCHAR_T \
+ _GLIBCXX_USE_C99_STDINT \
_GLIBCXX_USE_C99_STDINT_TR1 \
_GLIBCXX_USE_SCHED_YIELD \
_GLIBCXX_USE_NANOSLEEP \
diff --git a/libstdc++-v3/include/bits/chrono.h b/libstdc++-v3/include/bits/chrono.h
index fb99fe5eed7..81b92d724f7 100644
--- a/libstdc++-v3/include/bits/chrono.h
+++ b/libstdc++-v3/include/bits/chrono.h
@@ -884,7 +884,7 @@ _GLIBCXX_BEGIN_NAMESPACE_VERSION
/// @}
/// @cond undocumented
-#ifdef _GLIBCXX_USE_C99_STDINT_TR1
+#ifdef _GLIBCXX_USE_C99_STDINT
# define _GLIBCXX_CHRONO_INT64_T int64_t
#elif defined __INT64_TYPE__
# define _GLIBCXX_CHRONO_INT64_T __INT64_TYPE__
diff --git a/libstdc++-v3/include/c_compatibility/inttypes.h b/libstdc++-v3/include/c_compatibility/inttypes.h
index 9c2b7d6c68d..070fcbcc1f2 100644
--- a/libstdc++-v3/include/c_compatibility/inttypes.h
+++ b/libstdc++-v3/include/c_compatibility/inttypes.h
@@ -48,7 +48,7 @@
# endif
# endif
-#ifdef _GLIBCXX_USE_C99_INTTYPES_TR1
+#ifdef _GLIBCXX_USE_C99_INTTYPES
namespace std
{
@@ -72,13 +72,13 @@ namespace std
using ::strtoimax;
using ::strtoumax;
-#if defined(_GLIBCXX_USE_WCHAR_T) && _GLIBCXX_USE_C99_INTTYPES_WCHAR_T_TR1
+#if defined(_GLIBCXX_USE_WCHAR_T) && _GLIBCXX_USE_C99_INTTYPES_WCHAR_T
using ::wcstoimax;
using ::wcstoumax;
#endif
} // namespace
-#endif _GLIBCXX_USE_C99_INTTYPES_TR1
+#endif _GLIBCXX_USE_C99_INTTYPES
#else
diff --git a/libstdc++-v3/include/c_compatibility/stdatomic.h b/libstdc++-v3/include/c_compatibility/stdatomic.h
index b565a1c1ab1..0b633262d08 100644
--- a/libstdc++-v3/include/c_compatibility/stdatomic.h
+++ b/libstdc++-v3/include/c_compatibility/stdatomic.h
@@ -62,7 +62,7 @@ using std::atomic_char8_t;
using std::atomic_char16_t;
using std::atomic_char32_t;
using std::atomic_wchar_t;
-#ifdef _GLIBCXX_USE_C99_STDINT_TR1
+#ifdef _GLIBCXX_USE_C99_STDINT
using std::atomic_int8_t;
using std::atomic_uint8_t;
using std::atomic_int16_t;
@@ -92,7 +92,7 @@ using std::atomic_intptr_t;
using std::atomic_uintptr_t;
using std::atomic_size_t;
using std::atomic_ptrdiff_t;
-#ifdef _GLIBCXX_USE_C99_STDINT_TR1
+#ifdef _GLIBCXX_USE_C99_STDINT
using std::atomic_intmax_t;
using std::atomic_uintmax_t;
#endif
diff --git a/libstdc++-v3/include/c_compatibility/stdint.h b/libstdc++-v3/include/c_compatibility/stdint.h
index c264e979a0a..85948a5ada1 100644
--- a/libstdc++-v3/include/c_compatibility/stdint.h
+++ b/libstdc++-v3/include/c_compatibility/stdint.h
@@ -56,7 +56,7 @@
# endif
# endif
-#ifdef _GLIBCXX_USE_C99_STDINT_TR1
+#ifdef _GLIBCXX_USE_C99_STDINT
namespace std
{
@@ -97,7 +97,7 @@ namespace std
using ::uintptr_t;
} // namespace
-#endif // _GLIBCXX_USE_C99_STDINT_TR1
+#endif // _GLIBCXX_USE_C99_STDINT
#else
diff --git a/libstdc++-v3/include/c_global/cinttypes b/libstdc++-v3/include/c_global/cinttypes
index 8a9de63af79..06fc34d7d6e 100644
--- a/libstdc++-v3/include/c_global/cinttypes
+++ b/libstdc++-v3/include/c_global/cinttypes
@@ -50,7 +50,7 @@
# endif
#endif
-#ifdef _GLIBCXX_USE_C99_INTTYPES_TR1
+#ifdef _GLIBCXX_USE_C99_INTTYPES
namespace std
{
@@ -68,13 +68,13 @@ namespace std
using ::strtoimax;
using ::strtoumax;
-#if defined(_GLIBCXX_USE_WCHAR_T) && _GLIBCXX_USE_C99_INTTYPES_WCHAR_T_TR1
+#if defined(_GLIBCXX_USE_WCHAR_T) && _GLIBCXX_USE_C99_INTTYPES_WCHAR_T
using ::wcstoimax;
using ::wcstoumax;
#endif
} // namespace std
-#endif // _GLIBCXX_USE_C99_INTTYPES_TR1
+#endif // _GLIBCXX_USE_C99_INTTYPES
#endif // C++11
diff --git a/libstdc++-v3/include/c_global/cstdint b/libstdc++-v3/include/c_global/cstdint
index 64e8574badc..97a30d5e004 100644
--- a/libstdc++-v3/include/c_global/cstdint
+++ b/libstdc++-v3/include/c_global/cstdint
@@ -47,7 +47,7 @@
namespace std
{
-#ifdef _GLIBCXX_USE_C99_STDINT_TR1
+#ifdef _GLIBCXX_USE_C99_STDINT
using ::int8_t;
using ::int16_t;
using ::int32_t;
@@ -83,7 +83,7 @@ namespace std
using ::uintmax_t;
using ::uintptr_t;
-#else // !_GLIBCXX_USE_C99_STDINT_TR1
+#else // !_GLIBCXX_USE_C99_STDINT
using intmax_t = __INTMAX_TYPE__;
using uintmax_t = __UINTMAX_TYPE__;
@@ -138,7 +138,7 @@ namespace std
using uintptr_t = __UINTPTR_TYPE__;
#endif
-#endif // _GLIBCXX_USE_C99_STDINT_TR1
+#endif // _GLIBCXX_USE_C99_STDINT
} // namespace std
#endif // C++11
diff --git a/libstdc++-v3/include/std/atomic b/libstdc++-v3/include/std/atomic
index b502027e4a4..111df2a978b 100644
--- a/libstdc++-v3/include/std/atomic
+++ b/libstdc++-v3/include/std/atomic
@@ -1103,7 +1103,7 @@ _GLIBCXX_BEGIN_NAMESPACE_VERSION
/// atomic_char32_t
typedef atomic<char32_t> atomic_char32_t;
-#ifdef _GLIBCXX_USE_C99_STDINT_TR1
+#ifdef _GLIBCXX_USE_C99_STDINT
// _GLIBCXX_RESOLVE_LIB_DEFECTS
// 2441. Exact-width atomic typedefs should be provided
diff --git a/libstdc++-v3/src/c++11/cow-stdexcept.cc b/libstdc++-v3/src/c++11/cow-stdexcept.cc
index 652f248a54e..8d1cc4605d4 100644
--- a/libstdc++-v3/src/c++11/cow-stdexcept.cc
+++ b/libstdc++-v3/src/c++11/cow-stdexcept.cc
@@ -198,7 +198,7 @@ _GLIBCXX_END_NAMESPACE_VERSION
// declared transaction-safe, so we just don't provide transactional clones
// in this case.
#if _GLIBCXX_USE_WEAK_REF
-#ifdef _GLIBCXX_USE_C99_STDINT_TR1
+#ifdef _GLIBCXX_USE_C99_STDINT
#include <stdint.h>
@@ -461,5 +461,5 @@ CTORDTOR(15underflow_error, std::underflow_error, runtime_error)
}
-#endif // _GLIBCXX_USE_C99_STDINT_TR1
+#endif // _GLIBCXX_USE_C99_STDINT
#endif // _GLIBCXX_USE_WEAK_REF
--git a/libstdc++-v3/testsuite/29_atomics/headers/stdatomic.h/c_compat.cc b/libstdc++-v3/testsuite/29_atomics/headers/stdatomic.h/c_compat.cc
index 8dd7054a997..3364c60a225 100644
--- a/libstdc++-v3/testsuite/29_atomics/headers/stdatomic.h/c_compat.cc
+++ b/libstdc++-v3/testsuite/29_atomics/headers/stdatomic.h/c_compat.cc
@@ -70,7 +70,7 @@ static_assert(is_same<atomic_char32_t, _Atomic(char32_t)>);
static_assert(is_same<atomic_wchar_t, _Atomic(wchar_t)>);
#include <stdint.h>
-#ifdef _GLIBCXX_USE_C99_STDINT_TR1
+#ifdef _GLIBCXX_USE_C99_STDINT
static_assert(is_same<atomic_int8_t, _Atomic(int8_t)>);
static_assert(is_same<atomic_uint8_t, _Atomic(uint8_t)>);
static_assert(is_same<atomic_int16_t, _Atomic(int16_t)>);
diff --git a/libstdc++-v3/testsuite/lib/libstdc++.exp b/libstdc++-v3/testsuite/lib/libstdc++.exp
index 490abd108fa..7d9471a1ded 100644
--- a/libstdc++-v3/testsuite/lib/libstdc++.exp
+++ b/libstdc++-v3/testsuite/lib/libstdc++.exp
@@ -1063,7 +1063,7 @@ proc check_v3_target_parallel_mode { } {
# Return 1 if the C99 stdint facilities are available, 0 otherwise.
proc check_v3_target_cstdint { } {
return [check_v3_target_prop_cached et_cstdint {
- set cond "defined _GLIBCXX_USE_C99_STDINT_TR1"
+ set cond "defined _GLIBCXX_USE_C99_STDINT"
return [v3_check_preprocessor_condition cstdint $cond]
}]
}
--
2.40.1
next prev parent reply other threads:[~2023-05-16 9:11 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-05-16 9:11 [committed 1/3] libstdc++: Stop using _GLIBCXX_USE_C99_COMPLEX_TR1 in <complex> Jonathan Wakely
2023-05-16 9:11 ` Jonathan Wakely [this message]
2023-05-16 9:11 ` [committed 3/3] libstdc++: Stop using TR1 macros in <cctype> and <cfenv> Jonathan Wakely
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230516091132.1698684-2-jwakely@redhat.com \
--to=jwakely@redhat.com \
--cc=gcc-patches@gcc.gnu.org \
--cc=libstdc++@gcc.gnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).