From: Richard Earnshaw <Richard.Earnshaw@foss.arm.com>
To: Andrea Corallo <andrea.corallo@arm.com>,
Kyrylo Tkachov <Kyrylo.Tkachov@arm.com>
Cc: Richard Earnshaw <Richard.Earnshaw@arm.com>, nd <nd@arm.com>,
Andrea Corallo via Gcc-patches <gcc-patches@gcc.gnu.org>
Subject: Re: [PATCH 12/15 V3] arm: implement bti injection
Date: Mon, 5 Dec 2022 17:02:25 +0000 [thread overview]
Message-ID: <30990d91-0c32-a3b0-7954-846bf1eddc8d@foss.arm.com> (raw)
In-Reply-To: <gkrh6znaolq.fsf_-_@arm.com>
On 28/10/2022 17:40, Andrea Corallo via Gcc-patches wrote:
> Hi all,
>
> please find attached the third iteration of this patch addresing review
> comments.
>
> Thanks
>
> Andrea
>
@@ -23374,12 +23374,6 @@ output_probe_stack_range (rtx reg1, rtx reg2)
return "";
}
-static bool
-aarch_bti_enabled ()
-{
- return false;
-}
-
/* Generate the prologue instructions for entry into an ARM or Thumb-2
function. */
void
@@ -32992,6 +32986,61 @@ arm_current_function_pac_enabled_p (void)
&& !crtl->is_leaf));
}
+/* Return TRUE if Branch Target Identification Mechanism is enabled. */
+bool
+aarch_bti_enabled (void)
+{
+ return aarch_enable_bti == 1;
+}
See comment in earlier patch about the location of this function moving.
Can aarch_enable_bti take values other than 0 and 1? If not, then
writing aarch_enable_bti != 0 is slightly more robust, but perhaps this
should be replaced by a macro anyway, much like a number of other
predicates used by the backend.
+ return GET_CODE (pat) == UNSPEC_VOLATILE && XINT (pat, 1) ==
UNSPEC_BTI_NOP;
I'm not sure where this crept in, but UNSPEC and UNSPEC_VOLATILE have
separate enums in the backend, so UNSPEC_BIT_NOP should really be
VUNSPEC_BTI_NOP and defined in the enum "unspecv".
+aarch_pac_insn_p (rtx x)
+{
+ if (!x || !INSN_P (x))
+ return false;
+
+ rtx pat = PATTERN (x);
+
+ if (GET_CODE (pat) == SET)
+ {
+ rtx tmp = XEXP (pat, 1);
+ if (tmp
+ && GET_CODE (tmp) == UNSPEC
+ && (XINT (tmp, 1) == UNSPEC_PAC_NOP
+ || XINT (tmp, 1) == UNSPEC_PACBTI_NOP))
+ return true;
+ }
+
This will also need updating (see review on earlier patch) because
PACBTI needs to be unspec_volatile, while PAC doesn't.
+/* The following two functions are for code compatibility with aarch64
+ code, this even if in arm we have only one bti instruction. */
+
I'd just write
/* Target specific mapping for aarch_gen_bti_c and aarch_gen_bti_j.
For Arm, both of these map to a simple BTI instruction. */
@@ -162,6 +162,7 @@ (define_c_enum "unspec" [
UNSPEC_PAC_NOP ; Represents PAC signing LR
UNSPEC_PACBTI_NOP ; Represents PAC signing LR + valid landing pad
UNSPEC_AUT_NOP ; Represents PAC verifying LR
+ UNSPEC_BTI_NOP ; Represent BTI
])
BTI is an unspec volatile, so this should be in the "vunspec" enum and
renamed accordingly (see above).
R.
next prev parent reply other threads:[~2022-12-05 17:02 UTC|newest]
Thread overview: 66+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-08-12 14:26 [PATCH 0/15] arm: Enables return address verification and branch target identification on Cortex-M Andrea Corallo
2022-08-12 15:14 ` [PATCH 1/15] arm: Make mbranch-protection opts parsing common to AArch32/64 Andrea Corallo
2022-12-22 17:04 ` [PATCH 1/15 V2] " Andrea Corallo
2023-01-11 10:48 ` Richard Earnshaw
2022-08-12 15:15 ` [PATCH 2/15] arm: Add Armv8.1-M Mainline target feature +pacbti Andrea Corallo
2022-08-12 15:21 ` [PATCH 3/15] arm: Add option -mbranch-protection Andrea Corallo
2022-08-12 15:22 ` [PATCH 4/15] arm: Add testsuite library support for PACBTI target Andrea Corallo
2022-08-12 15:26 ` [PATCH 5/15] arm: Implement target feature macros for PACBTI Andrea Corallo
2022-08-12 15:29 ` [PATCH 6/15] arm: Add pointer authentication for stack-unwinding runtime Andrea Corallo
2022-08-12 15:30 ` [PATCH 7/15] arm: Emit build attributes for PACBTI target feature Andrea Corallo
2022-09-05 16:53 ` Andrea Corallo
2022-10-20 14:47 ` Kyrylo Tkachov
2022-10-20 15:15 ` Richard Earnshaw
2022-10-21 12:19 ` Richard Earnshaw
2022-08-12 15:33 ` [PATCH 8/15] arm: Introduce multilibs " Andrea Corallo
2022-08-12 15:34 ` [PATCH 9/15] arm: Set again stack pointer as CFA reg when popping if necessary Andrea Corallo
2022-09-05 16:52 ` Andrea Corallo
2022-09-27 9:03 ` Kyrylo Tkachov
2022-09-27 10:05 ` Andrea Corallo
2022-09-27 15:24 ` Kyrylo Tkachov
2022-10-21 12:30 ` Richard Earnshaw
2022-10-26 8:49 ` Andrea Corallo
2022-11-08 14:57 ` Richard Earnshaw
2023-01-09 14:58 ` Andrea Corallo
2023-01-09 15:57 ` Richard Earnshaw
2023-01-09 16:48 ` Richard Earnshaw
2023-01-09 17:22 ` Richard Earnshaw
2023-01-11 9:55 ` Andrea Corallo
2022-08-12 15:36 ` [PATCH 10/15] arm: Implement cortex-M return signing address codegen Andrea Corallo
2022-09-05 16:55 ` Andrea Corallo
2022-09-14 14:20 ` [PATCH 10/15 V2] " Andrea Corallo
2022-10-21 12:58 ` Richard Earnshaw
2022-10-26 15:48 ` Andrea Corallo
2022-10-28 16:34 ` [PATCH 10/15 V3] " Andrea Corallo
2022-11-07 8:57 ` [PATCH 10/15 V4] " Andrea Corallo
2022-12-05 16:38 ` Richard Earnshaw
2022-12-09 14:16 ` [PATCH 10/15 V5] " Andrea Corallo
2022-12-12 10:53 ` Richard Earnshaw
2022-12-14 16:35 ` [PATCH 10/15 V6] " Andrea Corallo
2022-12-14 16:45 ` Richard Earnshaw
2023-01-11 9:58 ` [PATCH 10/15 V7] " Andrea Corallo
2023-01-11 10:39 ` Richard Earnshaw
2022-08-12 15:40 ` [PATCH 11/15] aarch64: Make bti pass generic so it can be used by the arm backend Andrea Corallo
2022-09-05 16:56 ` Andrea Corallo
2022-09-27 9:10 ` Kyrylo Tkachov
2022-08-12 15:41 ` [PATCH 12/15] arm: implement bti injection Andrea Corallo
2022-09-05 16:56 ` Andrea Corallo
2022-09-27 9:18 ` Kyrylo Tkachov
2022-09-29 15:45 ` [PATCH 12/15 V2] " Andrea Corallo
2022-10-20 14:56 ` Kyrylo Tkachov
2022-10-28 16:40 ` [PATCH 12/15 V3] " Andrea Corallo
2022-12-05 17:02 ` Richard Earnshaw [this message]
2022-12-14 16:40 ` [PATCH 12/15 V4] " Andrea Corallo
2022-12-14 17:00 ` Richard Earnshaw
2022-12-14 17:03 ` Richard Earnshaw
2022-12-22 17:13 ` [PATCH 12/15 V5] " Andrea Corallo
2023-01-11 15:08 ` Richard Earnshaw
2022-08-12 16:44 ` [PATCH 0/15] arm: Enables return address verification and branch target identification on Cortex-M Andrea Corallo
2022-08-12 17:10 ` [PATCH 13/15] arm: Add pacbti related multilib support for armv8.1-m.main Srinath Parvathaneni
2022-10-21 13:00 ` Richard Earnshaw
2022-09-21 8:07 ` [PING][PATCH 0/15] arm: Enables return address verification and branch target identification on Cortex-M Andrea Corallo
2022-10-21 13:01 ` Richard Earnshaw
2022-10-21 13:32 ` Andrea Corallo
2022-12-05 14:10 ` Andrea Corallo
2022-12-05 14:19 ` Kyrylo Tkachov
2023-01-23 10:50 ` [PATCH " Andrea Corallo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=30990d91-0c32-a3b0-7954-846bf1eddc8d@foss.arm.com \
--to=richard.earnshaw@foss.arm.com \
--cc=Kyrylo.Tkachov@arm.com \
--cc=Richard.Earnshaw@arm.com \
--cc=andrea.corallo@arm.com \
--cc=gcc-patches@gcc.gnu.org \
--cc=nd@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).