From: Kyrill Tkachov <kyrylo.tkachov@arm.com>
To: GCC Patches <gcc-patches@gcc.gnu.org>
Cc: Ramana Radhakrishnan <Ramana.Radhakrishnan@arm.com>,
Richard Earnshaw <Richard.Earnshaw@arm.com>
Subject: Re: [PATCH][ARM] Fix PR target/64460: Set 'shift' attr properly on some patterns
Date: Mon, 12 Jan 2015 14:38:00 -0000 [thread overview]
Message-ID: <54B3DA2E.3000209@arm.com> (raw)
In-Reply-To: <54B3D9CF.3070504@arm.com>
[-- Attachment #1: Type: text/plain, Size: 2155 bytes --]
Now with patch attached
Kyrill
On 12/01/15 14:27, Kyrill Tkachov wrote:
> Hi all,
>
> In this PR we ICE when compiling with -mtune=xscale. The ICE is a
> segfault in xscale_sched_adjust_cost.
> The root cause is that xscale_sched_adjust_cost uses the value of the
> 'shift' insn attribute to index
> the recog operands. In GCC 5 the form and number of operands in those
> patterns were updated but the
> shift value was not:
>
> Author: rearnsha <rearnsha@138bc75d-0d04-0410-961f-82ee72b054a4>
> Date: Thu May 29 09:39:07 2014 +0000
>
> * arm/iterators.md (shiftable_ops): New code iterator.
> (t2_binop0, arith_shift_insn): New code attributes.
> * arm/predicates.md (shift_nomul_operator): New predicate.
> * arm/arm.md (insn_enabled): Delete.
> (enabled): Remove insn_enabled test.
> (*arith_shiftsi): Delete. Replace with ...
> (*<arith_shift_insn>_multsi): ... new pattern.
> (*<arith_shift_insn>_shiftsi): ... new pattern.
> * config/arm/arm.c (arm_print_operand): Handle operand format 'b'.
>
> This led to an out-of-bounds array access. Only xscale_sched_adjust_cost
> uses the shift
> attribute, so the segfault only happens for xscale tuning. In the future
> we might want
> to use a more general pattern-matching approach to find the shifted
> operand in an rtx...
>
> In any case, this patch fixes the value of 'shift' for the offending
> pattern and also
> updates 'shift' for the *<arith_shift_insn>_shiftsi pattern to point to
> the correct
> operand that is being shifted.
>
> Tested arm-none-eabi and bootstrapped with -mtune=xscale in BOOT_CFLAGS.
>
> Ok for trunk?
>
> Thanks,
> Kyrill
>
> 2014-01-12 Kyrylo Tkachov <kyrylo.tkachov@arm.com>
>
> PR target/64460
> * config/arm/arm.md (*<arith_shift_insn>_multsi): Set 'shift' attr
> to 2.
> (*<arith_shift_insn>_shiftsi): Set 'shift' attr to 3.
>
> 2014-01-12 Kyrylo Tkachov <kyrylo.tkachov@arm.com>
>
> PR target/64460
> * gcc.target/arm/pr64460_1.c: New test.
>
>
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #2: arm-xscale-shift.patch --]
[-- Type: text/x-patch; name=arm-xscale-shift.patch, Size: 4173 bytes --]
commit c89087db2f16eda521d6c938d342570c1d69a7a2
Author: Kyrylo Tkachov <kyrylo.tkachov@arm.com>
Date: Fri Jan 9 16:41:44 2015 +0000
[ARM] PR target/64460 ICE with -mtune=xscale in shift attr
diff --git a/gcc/config/arm/arm.md b/gcc/config/arm/arm.md
index c61057f..bbefb93 100644
--- a/gcc/config/arm/arm.md
+++ b/gcc/config/arm/arm.md
@@ -8255,36 +8255,36 @@ (define_insn "trap"
(define_insn "*<arith_shift_insn>_multsi"
[(set (match_operand:SI 0 "s_register_operand" "=r,r")
(shiftable_ops:SI
(mult:SI (match_operand:SI 2 "s_register_operand" "r,r")
(match_operand:SI 3 "power_of_two_operand" ""))
(match_operand:SI 1 "s_register_operand" "rk,<t2_binop0>")))]
"TARGET_32BIT"
"<arith_shift_insn>%?\\t%0, %1, %2, lsl %b3"
[(set_attr "predicable" "yes")
(set_attr "predicable_short_it" "no")
- (set_attr "shift" "4")
+ (set_attr "shift" "2")
(set_attr "arch" "a,t2")
(set_attr "type" "alu_shift_imm")])
(define_insn "*<arith_shift_insn>_shiftsi"
[(set (match_operand:SI 0 "s_register_operand" "=r,r,r")
(shiftable_ops:SI
(match_operator:SI 2 "shift_nomul_operator"
[(match_operand:SI 3 "s_register_operand" "r,r,r")
(match_operand:SI 4 "shift_amount_operand" "M,M,r")])
(match_operand:SI 1 "s_register_operand" "rk,<t2_binop0>,rk")))]
"TARGET_32BIT && GET_CODE (operands[2]) != MULT"
"<arith_shift_insn>%?\\t%0, %1, %3%S2"
[(set_attr "predicable" "yes")
(set_attr "predicable_short_it" "no")
- (set_attr "shift" "4")
+ (set_attr "shift" "3")
(set_attr "arch" "a,t2,a")
(set_attr "type" "alu_shift_imm,alu_shift_imm,alu_shift_reg")])
(define_split
[(set (match_operand:SI 0 "s_register_operand" "")
(match_operator:SI 1 "shiftable_operator"
[(match_operator:SI 2 "shiftable_operator"
[(match_operator:SI 3 "shift_operator"
[(match_operand:SI 4 "s_register_operand" "")
(match_operand:SI 5 "reg_or_int_operand" "")])
diff --git a/gcc/testsuite/gcc.target/arm/pr64460_1.c b/gcc/testsuite/gcc.target/arm/pr64460_1.c
new file mode 100644
index 0000000..ee6ad4a
--- /dev/null
+++ b/gcc/testsuite/gcc.target/arm/pr64460_1.c
@@ -0,0 +1,69 @@
+/* { dg-do compile } */
+/* { dg-options "-O2 -mtune=xscale" } */
+
+typedef unsigned int size_t;
+typedef short unsigned int __uint16_t;
+typedef long unsigned int __uint32_t;
+typedef unsigned int __uintptr_t;
+typedef __uint16_t uint16_t ;
+typedef __uint32_t uint32_t ;
+typedef __uintptr_t uintptr_t;
+typedef uint32_t Objects_Id;
+typedef uint16_t Objects_Maximum;
+typedef struct { } Objects_Control;
+
+static __inline__ void *_Addresses_Align_up (void *address, size_t alignment)
+{
+ uintptr_t mask = alignment - (uintptr_t)1;
+ return (void*)(((uintptr_t)address + mask) & ~mask);
+}
+
+typedef struct {
+ Objects_Id minimum_id;
+ Objects_Maximum maximum;
+ _Bool
+ auto_extend;
+ Objects_Maximum allocation_size;
+ void **object_blocks;
+} Objects_Information;
+
+extern uint32_t _Objects_Get_index (Objects_Id);
+extern void** _Workspace_Allocate (size_t);
+
+void _Objects_Extend_information (Objects_Information *information)
+{
+ uint32_t block_count;
+ uint32_t minimum_index;
+ uint32_t maximum;
+ size_t block_size;
+ _Bool
+ do_extend =
+ minimum_index = _Objects_Get_index( information->minimum_id );
+ if ( information->object_blocks ==
+ ((void *)0)
+ )
+ block_count = 0;
+ else {
+ block_count = information->maximum / information->allocation_size;
+ }
+ if ( do_extend ) {
+ void **object_blocks;
+ uintptr_t object_blocks_size;
+ uintptr_t inactive_per_block_size;
+ object_blocks_size = (uintptr_t)_Addresses_Align_up(
+ (void*)(block_count * sizeof(void*)),
+ 8
+ );
+ inactive_per_block_size =
+ (uintptr_t)_Addresses_Align_up(
+ (void*)(block_count * sizeof(uint32_t)),
+ 8
+ );
+ block_size = object_blocks_size + inactive_per_block_size +
+ ((maximum + minimum_index) * sizeof(Objects_Control *));
+ if ( information->auto_extend ) {
+ object_blocks = _Workspace_Allocate( block_size );
+ } else {
+ }
+ }
+}
next prev parent reply other threads:[~2015-01-12 14:29 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-01-12 14:29 Kyrill Tkachov
2015-01-12 14:38 ` Kyrill Tkachov [this message]
2015-01-14 9:58 ` Ramana Radhakrishnan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=54B3DA2E.3000209@arm.com \
--to=kyrylo.tkachov@arm.com \
--cc=Ramana.Radhakrishnan@arm.com \
--cc=Richard.Earnshaw@arm.com \
--cc=gcc-patches@gcc.gnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).