From: Jeff Law <law@redhat.com>
To: Jakub Jelinek <jakub@redhat.com>, Alexander Monakov <amonakov@ispras.ru>
Cc: gcc-patches@gcc.gnu.org, Rich Felker <dalias@libc.org>
Subject: Re: [PATCH] Expand PIC calls without PLT with -fno-plt
Date: Wed, 06 May 2015 15:55:00 -0000 [thread overview]
Message-ID: <554A395E.5020103@redhat.com> (raw)
In-Reply-To: <20150506154554.GZ1751@tucnak.redhat.com>
On 05/06/2015 09:45 AM, Jakub Jelinek wrote:
> As for hoisting the load of the call address before the loop, with lazy
> binding that has the obvious disadvantage that you'd resolve the slot again
> and again, if you are unlucky enough that the function hasn't been resolved
> yet. Unless the shared PLT stub after computing _G_O_T_ (for x86) also
> rechecks the .got.plt address.
Yea, but I suspect that's the rare case rather than the common case.
Of course, it's so bloody expensive when it happens, it might totally
outweigh the aggregated benefits from all the other profitable hoisted
GOT loads.
jeff
next prev parent reply other threads:[~2015-05-06 15:55 UTC|newest]
Thread overview: 106+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-05-04 16:38 PIC calls without PLT, generic implementation Alexander Monakov
2015-05-04 16:38 ` [PATCH i386] Extend sibcall peepholes to allow source in %eax Alexander Monakov
2015-05-10 16:54 ` Jan Hubicka
2015-05-11 17:50 ` Alexander Monakov
2015-05-11 18:00 ` Jan Hubicka
2015-05-11 19:46 ` Uros Bizjak
2015-05-11 19:48 ` Jeff Law
2015-05-11 20:16 ` Jan Hubicka
2015-05-13 19:05 ` Alexander Monakov
2015-05-13 20:04 ` Jan Hubicka
2015-05-14 17:36 ` Alexander Monakov
2015-05-04 16:38 ` [PATCH i386] Move CLOBBERED_REGS earlier in register class list Alexander Monakov
2015-05-10 16:44 ` Jan Hubicka
2015-05-10 17:51 ` Uros Bizjak
2015-05-10 18:09 ` Uros Bizjak
2015-05-11 16:26 ` Alexander Monakov
2015-05-11 16:30 ` Uros Bizjak
2015-05-04 16:38 ` [PATCH i386] PR65753: allow PIC tail calls via function pointers Alexander Monakov
2015-05-10 16:37 ` Jan Hubicka
2015-05-11 16:11 ` Alexander Monakov
2015-05-04 16:38 ` [RFC PATCH] ira: accept loads via argp rtx in validate_equiv_mem Alexander Monakov
2015-05-04 17:37 ` Jeff Law
2015-05-04 16:38 ` [PATCH i386] Allow sibcalls in no-PLT PIC Alexander Monakov
2015-05-15 16:37 ` Alexander Monakov
2015-05-15 16:48 ` H.J. Lu
2015-05-15 20:08 ` Jan Hubicka
2015-05-15 20:23 ` H.J. Lu
2015-05-15 20:35 ` Rich Felker
2015-05-15 20:37 ` H.J. Lu
2015-05-15 20:45 ` Rich Felker
2015-05-15 22:16 ` H.J. Lu
2015-05-15 23:14 ` Jan Hubicka
2015-05-15 23:30 ` H.J. Lu
2015-05-15 23:35 ` H.J. Lu
2015-05-15 23:44 ` H.J. Lu
2015-05-16 0:18 ` Rich Felker
2015-05-16 14:33 ` H.J. Lu
2015-05-16 19:03 ` H.J. Lu
2015-05-16 19:32 ` Rich Felker
2015-05-16 23:23 ` H.J. Lu
2015-05-15 23:49 ` Rich Felker
2015-05-19 14:48 ` Michael Matz
2015-05-19 15:11 ` Jeff Law
2015-05-19 16:03 ` Michael Matz
2015-05-19 19:11 ` Rich Felker
2015-05-19 18:08 ` Rich Felker
2015-05-19 19:03 ` Richard Henderson
2015-05-19 19:10 ` H.J. Lu
2015-05-19 19:17 ` Richard Henderson
2015-05-19 19:20 ` H.J. Lu
2015-05-19 19:54 ` Richard Henderson
2015-05-19 20:27 ` Rich Felker
2015-05-19 20:44 ` H.J. Lu
2015-05-19 21:28 ` Rich Felker
2015-05-20 0:52 ` H.J. Lu
2015-05-20 1:09 ` Rich Felker
2015-05-22 19:32 ` Richard Henderson
2015-05-19 19:48 ` Rich Felker
2015-05-19 20:16 ` Richard Henderson
2015-05-20 12:13 ` Michael Matz
2015-05-20 12:40 ` H.J. Lu
2015-05-20 14:17 ` Rich Felker
2015-05-20 14:33 ` Michael Matz
2015-05-18 18:25 ` Alexander Monakov
2015-05-18 19:03 ` Jan Hubicka
2015-05-04 16:38 ` [PATCH] Expand PIC calls without PLT with -fno-plt Alexander Monakov
2015-05-04 17:34 ` Jeff Law
2015-05-04 17:40 ` Jakub Jelinek
2015-05-04 17:42 ` Jeff Law
2015-05-06 3:08 ` Rich Felker
2015-05-10 17:07 ` Jan Hubicka
2015-05-06 15:25 ` Alexander Monakov
2015-05-06 15:46 ` Jakub Jelinek
2015-05-06 15:55 ` Jeff Law [this message]
2015-05-06 16:44 ` Alexander Monakov
2015-05-06 17:35 ` Rich Felker
2015-05-06 18:26 ` H.J. Lu
2015-05-06 18:37 ` Rich Felker
2015-05-06 18:45 ` H.J. Lu
2015-05-06 19:01 ` Rich Felker
2015-05-06 19:05 ` H.J. Lu
2015-05-06 19:18 ` Rich Felker
2015-05-06 19:24 ` H.J. Lu
2015-05-11 11:48 ` Michael Matz
2015-05-11 14:20 ` Rich Felker
2015-05-07 18:22 ` Jeff Law
2015-05-07 19:13 ` H.J. Lu
2015-05-10 16:59 ` Jan Hubicka
2015-05-11 20:36 ` Jeff Law
2015-05-11 20:55 ` H.J. Lu
2015-05-11 22:13 ` Jan Hubicka
2015-06-22 15:52 ` Jiong Wang
2015-06-22 18:18 ` Alexander Monakov
2015-06-23 8:41 ` Ramana Radhakrishnan
2015-06-23 10:43 ` Alexander Monakov
2015-06-23 13:28 ` Jeff Law
2015-07-16 10:37 ` [AArch64] Tighten direct call pattern to repair -fno-plt Jiong Wang
2015-07-16 10:47 ` Alexander Monakov
2015-07-16 10:48 ` Jiong Wang
2015-07-21 12:52 ` [AArch64][sibcall]Tighten " Jiong Wang
2015-08-04 9:50 ` James Greenhalgh
2015-08-06 16:18 ` [COMMITTED][AArch64][sibcall]Tighten " Jiong Wang
2015-08-07 8:22 ` James Greenhalgh
2015-08-07 13:28 ` Jiong Wang
2015-08-04 9:50 ` [AArch64] Tighten " James Greenhalgh
2015-08-06 16:16 ` [COMMITTED][AArch64] " Jiong Wang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=554A395E.5020103@redhat.com \
--to=law@redhat.com \
--cc=amonakov@ispras.ru \
--cc=dalias@libc.org \
--cc=gcc-patches@gcc.gnu.org \
--cc=jakub@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).