* [PATCH] [AArch32] Additional bics patterns.
@ 2015-04-22 13:13 Alex Velenko
2015-04-22 13:27 ` Kyrill Tkachov
0 siblings, 1 reply; 8+ messages in thread
From: Alex Velenko @ 2015-04-22 13:13 UTC (permalink / raw)
To: gcc-patches; +Cc: ramana.radhakrishnan
Hi,
This patch adds arm rtl patterns to generate bics instructions with shift.
Done full regression run on arm-none-eabi.
Is patch ok?
gcc/config
2015-04-22 Alex Velenko <Alex.Velenko@arm.com>
* arm/arm.md (andsi_not_shiftsi_si_scc): New pattern.
* (andsi_not_shiftsi_si_scc_no_reuse): New pattern.
gcc/testsuite
2015-04-22 Alex Velenko <Alex.Velenko@arm.com>
* gcc.target/arm/bics_1.c : New testcase.
* gcc.target/arm/bics_2.c : New testcase.
* gcc.target/arm/bics_3.c : New testcase.
* gcc.target/arm/bics_4.c : New testcase.
---
gcc/config/arm/arm.md | 42 ++++++++++++++++++++++++++
gcc/testsuite/gcc.target/arm/bics_1.c | 54 +++++++++++++++++++++++++++++++++
gcc/testsuite/gcc.target/arm/bics_2.c | 57 +++++++++++++++++++++++++++++++++++
gcc/testsuite/gcc.target/arm/bics_3.c | 41 +++++++++++++++++++++++++
gcc/testsuite/gcc.target/arm/bics_4.c | 49 ++++++++++++++++++++++++++++++
5 files changed, 243 insertions(+)
create mode 100644 gcc/testsuite/gcc.target/arm/bics_1.c
create mode 100644 gcc/testsuite/gcc.target/arm/bics_2.c
create mode 100644 gcc/testsuite/gcc.target/arm/bics_3.c
create mode 100644 gcc/testsuite/gcc.target/arm/bics_4.c
diff --git a/gcc/config/arm/arm.md b/gcc/config/arm/arm.md
index 164ac13..51a149e 100644
--- a/gcc/config/arm/arm.md
+++ b/gcc/config/arm/arm.md
@@ -2768,6 +2768,48 @@
(const_string "logic_shift_reg")))]
)
+(define_insn "andsi_not_shiftsi_si_scc_no_reuse"
+ [(set (reg:CC_NOOV CC_REGNUM)
+ (compare:CC_NOOV
+ (and:SI (not:SI (match_operator:SI 0 "shift_operator"
+ [(match_operand:SI 1 "s_register_operand" "r")
+ (match_operand:SI 2 "arm_rhs_operand" "rM")]))
+ (match_operand:SI 3 "s_register_operand" "r"))
+ (const_int 0)))
+ (clobber (match_scratch:SI 4 "=r"))]
+ "TARGET_32BIT"
+ "bic%.%?\\t%4, %3, %1%S0"
+ [(set_attr "predicable" "yes")
+ (set_attr "conds" "set")
+ (set_attr "shift" "1")
+ (set (attr "type") (if_then_else (match_operand 2 "const_int_operand" "")
+ (const_string "logic_shift_imm")
+ (const_string "logic_shift_reg")))]
+)
+
+(define_insn "andsi_not_shiftsi_si_scc"
+ [(parallel [(set (reg:CC_NOOV CC_REGNUM)
+ (compare:CC_NOOV
+ (and:SI (not:SI (match_operator:SI 0 "shift_operator"
+ [(match_operand:SI 1 "s_register_operand" "r")
+ (match_operand:SI 2 "arm_rhs_operand" "rM")]))
+ (match_operand:SI 3 "s_register_operand" "r"))
+ (const_int 0)))
+ (set (match_operand:SI 4 "s_register_operand" "=r")
+ (and:SI (not:SI (match_op_dup 0
+ [(match_dup 1)
+ (match_dup 2)]))
+ (match_dup 3)))])]
+ "TARGET_32BIT"
+ "bic%.%?\\t%4, %3, %1%S0"
+ [(set_attr "predicable" "yes")
+ (set_attr "conds" "set")
+ (set_attr "shift" "1")
+ (set (attr "type") (if_then_else (match_operand 2 "const_int_operand" "")
+ (const_string "logic_shift_imm")
+ (const_string "logic_shift_reg")))]
+)
+
(define_insn "*andsi_notsi_si_compare0"
[(set (reg:CC_NOOV CC_REGNUM)
(compare:CC_NOOV
diff --git a/gcc/testsuite/gcc.target/arm/bics_1.c b/gcc/testsuite/gcc.target/arm/bics_1.c
new file mode 100644
index 0000000..173eb89
--- /dev/null
+++ b/gcc/testsuite/gcc.target/arm/bics_1.c
@@ -0,0 +1,54 @@
+/* { dg-do run } */
+/* { dg-options "-O2 --save-temps -fno-inline" } */
+/* { dg-require-effective-target arm32 } */
+
+extern void abort (void);
+
+int
+bics_si_test1 (int a, int b, int c)
+{
+ int d = a & ~b;
+
+ /* { dg-final { scan-assembler-times "bics\tr\[0-9\]+, r\[0-9\]+, r\[0-9\]+" 2 } } */
+ if (d == 0)
+ return a + c;
+ else
+ return b + d + c;
+}
+
+int
+bics_si_test2 (int a, int b, int c)
+{
+ int d = a & ~(b << 3);
+
+ /* { dg-final { scan-assembler-times "bics\tr\[0-9\]+, r\[0-9\]+, r\[0-9\]+, .sl \#3" 1 } } */
+ if (d == 0)
+ return a + c;
+ else
+ return b + d + c;
+}
+
+int
+main ()
+{
+ int x;
+
+ x = bics_si_test1 (29, ~4, 5);
+ if (x != ((29 & 4) + ~4 + 5))
+ abort ();
+
+ x = bics_si_test1 (5, ~2, 20);
+ if (x != 25)
+ abort ();
+
+ x = bics_si_test2 (35, ~4, 5);
+ if (x != ((35 & ~(~4 << 3)) + ~4 + 5))
+ abort ();
+
+ x = bics_si_test2 (96, ~2, 20);
+ if (x != 116)
+ abort ();
+
+ return 0;
+}
+/* { dg-final { cleanup-saved-temps } } */
diff --git a/gcc/testsuite/gcc.target/arm/bics_2.c b/gcc/testsuite/gcc.target/arm/bics_2.c
new file mode 100644
index 0000000..740d7c9
--- /dev/null
+++ b/gcc/testsuite/gcc.target/arm/bics_2.c
@@ -0,0 +1,57 @@
+/* { dg-do run } */
+/* { dg-options "-O2 --save-temps -fno-inline" } */
+/* { dg-require-effective-target arm32 } */
+
+extern void abort (void);
+
+int
+bics_si_test1 (int a, int b, int c)
+{
+ int d = a & ~b;
+
+ /* { dg-final { scan-assembler-not "bics\tr\[0-9\]+, r\[0-9\]+, r\[0-9\]+" } } */
+ /* { dg-final { scan-assembler-times "bic\tr\[0-9\]+, r\[0-9\]+, r\[0-9\]+" 2 } } */
+ if (d <= 0)
+ return a + c;
+ else
+ return b + d + c;
+}
+
+int
+bics_si_test2 (int a, int b, int c)
+{
+ int d = a & ~(b << 3);
+
+ /* { dg-final { scan-assembler-not "bics\tr\[0-9\]+, r\[0-9\]+, r\[0-9\]+, .sl \#3" } } */
+ /* { dg-final { scan-assembler "bic\tr\[0-9\]+, r\[0-9\]+, r\[0-9\]+, .sl \#3" } } */
+ if (d <= 0)
+ return a + c;
+ else
+ return b + d + c;
+}
+
+int
+main ()
+{
+ int x;
+
+ x = bics_si_test1 (29, ~4, 5);
+ if (x != ((29 & 4) + ~4 + 5))
+ abort ();
+
+ x = bics_si_test1 (5, ~2, 20);
+ if (x != 25)
+ abort ();
+
+ x = bics_si_test2 (35, ~4, 5);
+ if (x != ((35 & ~(~4 << 3)) + ~4 + 5))
+ abort ();
+
+ x = bics_si_test2 (96, ~2, 20);
+ if (x != 116)
+ abort ();
+
+ return 0;
+}
+
+/* { dg-final { cleanup-saved-temps } } */
diff --git a/gcc/testsuite/gcc.target/arm/bics_3.c b/gcc/testsuite/gcc.target/arm/bics_3.c
new file mode 100644
index 0000000..e2b1c72
--- /dev/null
+++ b/gcc/testsuite/gcc.target/arm/bics_3.c
@@ -0,0 +1,41 @@
+/* { dg-do run } */
+/* { dg-options "-O2 --save-temps -fno-inline" } */
+/* { dg-require-effective-target arm32 } */
+
+extern void abort (void);
+
+int
+bics_si_test (int a, int b)
+{
+ if (a & ~b)
+ return 1;
+ else
+ return 0;
+}
+
+int
+bics_si_test2 (int a, int b)
+{
+ if (a & ~ (b << 2))
+ return 1;
+ else
+ return 0;
+}
+
+int
+main (void)
+{
+ int a = 5;
+ int b = 5;
+ int c = 20;
+ if (bics_si_test (a, b))
+ abort ();
+ if (bics_si_test2 (c, b))
+ abort ();
+ return 0;
+}
+
+/* { dg-final { scan-assembler-times "bics\tr\[0-9\]+, r\[0-9\]+, r\[0-9\]+" 2 } } */
+/* { dg-final { scan-assembler-times "bics\tr\[0-9\]+, r\[0-9\]+, r\[0-9\]+, .sl #2" 1 } } */
+
+/* { dg-final { cleanup-saved-temps } } */
diff --git a/gcc/testsuite/gcc.target/arm/bics_4.c b/gcc/testsuite/gcc.target/arm/bics_4.c
new file mode 100644
index 0000000..8f2faf0
--- /dev/null
+++ b/gcc/testsuite/gcc.target/arm/bics_4.c
@@ -0,0 +1,49 @@
+/* { dg-do run } */
+/* { dg-options "-O2 --save-temps -fno-inline" } */
+/* { dg-require-effective-target arm32 } */
+
+extern void abort (void);
+
+int
+bics_si_test1 (int a, int b, int c)
+{
+ if ((a & b) == a)
+ return a;
+ else
+ return c;
+}
+
+int
+bics_si_test2 (int a, int b, int c)
+{
+ if ((a & b) == b)
+ return b;
+ else
+ return c;
+}
+
+int
+main ()
+{
+ int x;
+ x = bics_si_test1 (0xf00d, 0xf11f, 0);
+ if (x != 0xf00d)
+ abort ();
+
+ x = bics_si_test1 (0xf11f, 0xf00d, 0);
+ if (x != 0)
+ abort ();
+
+ x = bics_si_test2 (0xf00d, 0xf11f, 0);
+ if (x != 0)
+ abort ();
+
+ x = bics_si_test2 (0xf11f, 0xf00d, 0);
+ if (x != 0xf00d)
+ abort ();
+
+ return 0;
+}
+
+/* { dg-final { scan-assembler-times "bics\tr\[0-9\]+, r\[0-9\]+, r\[0-9\]+" 2 } } */
+/* { dg-final { cleanup-saved-temps } } */
--
1.8.1.2
^ permalink raw reply [flat|nested] 8+ messages in thread* RE: [PATCH] [AArch32] Additional bics patterns.
2015-04-22 13:13 [PATCH] [AArch32] Additional bics patterns Alex Velenko
@ 2015-04-22 13:27 ` Kyrill Tkachov
2015-04-24 15:41 ` Alex Velenko
0 siblings, 1 reply; 8+ messages in thread
From: Kyrill Tkachov @ 2015-04-22 13:27 UTC (permalink / raw)
To: Alex Velenko, gcc-patches; +Cc: Ramana Radhakrishnan
Hi Alex,
On 22/04/15 14:12, Alex Velenko wrote:
> Hi,
>
> This patch adds arm rtl patterns to generate bics instructions with shift.
>
> Done full regression run on arm-none-eabi.
A bootstrap on arm-none-linux-gnueabihf would be nice too.
>
>
> Is patch ok?
>
> gcc/config
>
> 2015-04-22 Alex Velenko <Alex.Velenko@arm.com>
>
> * arm/arm.md (andsi_not_shiftsi_si_scc): New pattern.
> * (andsi_not_shiftsi_si_scc_no_reuse): New pattern.
the path to arm.md should be:
* config/arm/arm.md
>
>
> +(define_insn "andsi_not_shiftsi_si_scc_no_reuse"
> + [(set (reg:CC_NOOV CC_REGNUM)
> + (compare:CC_NOOV
> + (and:SI (not:SI (match_operator:SI 0 "shift_operator"
> + [(match_operand:SI 1 "s_register_operand" "r")
> + (match_operand:SI 2 "arm_rhs_operand" "rM")]))
> + (match_operand:SI 3 "s_register_operand" "r"))
> + (const_int 0)))
> + (clobber (match_scratch:SI 4 "=r"))]
> + "TARGET_32BIT"
> + "bic%.%?\\t%4, %3, %1%S0"
> + [(set_attr "predicable" "yes")
> + (set_attr "conds" "set")
> + (set_attr "shift" "1")
> + (set (attr "type") (if_then_else (match_operand 2 "const_int_operand"
"")
> + (const_string "logic_shift_imm")
> + (const_string "logic_shift_reg")))]
> +)
Since this is a predicable instruction and has a 32-bit encoding
you should also set the 'predicable_short_it' attribute to 'no'
to prevent GCC from trying to put it inside an IT block when
compiling for ARMv8-A.
>
> +
> +(define_insn "andsi_not_shiftsi_si_scc"
> + [(parallel [(set (reg:CC_NOOV CC_REGNUM)
> + (compare:CC_NOOV
> + (and:SI (not:SI (match_operator:SI 0 "shift_operator"
> + [(match_operand:SI 1 "s_register_operand" "r")
> + (match_operand:SI 2 "arm_rhs_operand" "rM")]))
> + (match_operand:SI 3 "s_register_operand" "r"))
> + (const_int 0)))
> + (set (match_operand:SI 4 "s_register_operand" "=r")
> + (and:SI (not:SI (match_op_dup 0
> + [(match_dup 1)
> + (match_dup 2)]))
> + (match_dup 3)))])]
> + "TARGET_32BIT"
> + "bic%.%?\\t%4, %3, %1%S0"
> + [(set_attr "predicable" "yes")
> + (set_attr "conds" "set")
> + (set_attr "shift" "1")
> + (set (attr "type") (if_then_else (match_operand 2 "const_int_operand"
"")
> + (const_string "logic_shift_imm")
> + (const_string "logic_shift_reg")))]
same comment about predicable_short_it.
Cheers,
Kyrill
>
> +)
> +
> (define_insn "*andsi_notsi_si_compare0"
> [(set (reg:CC_NOOV CC_REGNUM)
> (compare:CC_NOOV
^ permalink raw reply [flat|nested] 8+ messages in thread* Re: [PATCH] [AArch32] Additional bics patterns.
2015-04-22 13:27 ` Kyrill Tkachov
@ 2015-04-24 15:41 ` Alex Velenko
2015-04-27 14:02 ` Alex Velenko
2015-05-01 9:28 ` Kyrill Tkachov
0 siblings, 2 replies; 8+ messages in thread
From: Alex Velenko @ 2015-04-24 15:41 UTC (permalink / raw)
To: Kyrylo Tkachov, gcc-patches; +Cc: Ramana Radhakrishnan
Hi,
This patch adds rtl patterns to generate bics instructions with shift.
Added attribute predicable_short_it since last respin.
Done full regression run on arm-none-eabi and arm-none-gnueabihf.
Bootstrapped on arm-none-gnueabihf.
Is this patch ok?
gcc/config
2015-04-24 Alex Velenko <Alex.Velenko@arm.com>
* arm/arm.md (andsi_not_shiftsi_si_scc): New pattern.
* (andsi_not_shiftsi_si_scc_no_reuse): New pattern.
gcc/testsuite
2015-04-24 Alex Velenko <Alex.Velenko@arm.com>
* gcc.target/arm/bics_1.c : New testcase.
* gcc.target/arm/bics_2.c : New testcase.
* gcc.target/arm/bics_3.c : New testcase.
* gcc.target/arm/bics_4.c : New testcase.
---
gcc/config/arm/arm.md | 44 +++++++++++++++++++++++++++
gcc/testsuite/gcc.target/arm/bics_1.c | 54
+++++++++++++++++++++++++++++++++
gcc/testsuite/gcc.target/arm/bics_2.c | 57
+++++++++++++++++++++++++++++++++++
gcc/testsuite/gcc.target/arm/bics_3.c | 41 +++++++++++++++++++++++++
gcc/testsuite/gcc.target/arm/bics_4.c | 49 ++++++++++++++++++++++++++++++
5 files changed, 245 insertions(+)
create mode 100644 gcc/testsuite/gcc.target/arm/bics_1.c
create mode 100644 gcc/testsuite/gcc.target/arm/bics_2.c
create mode 100644 gcc/testsuite/gcc.target/arm/bics_3.c
create mode 100644 gcc/testsuite/gcc.target/arm/bics_4.c
diff --git a/gcc/config/arm/arm.md b/gcc/config/arm/arm.md
index 164ac13..9e774c1 100644
--- a/gcc/config/arm/arm.md
+++ b/gcc/config/arm/arm.md
@@ -2768,6 +2768,50 @@
(const_string "logic_shift_reg")))]
)
+(define_insn "andsi_not_shiftsi_si_scc_no_reuse"
+ [(set (reg:CC_NOOV CC_REGNUM)
+ (compare:CC_NOOV
+ (and:SI (not:SI (match_operator:SI 0 "shift_operator"
+ [(match_operand:SI 1 "s_register_operand" "r")
+ (match_operand:SI 2 "arm_rhs_operand" "rM")]))
+ (match_operand:SI 3 "s_register_operand" "r"))
+ (const_int 0)))
+ (clobber (match_scratch:SI 4 "=r"))]
+ "TARGET_32BIT"
+ "bic%.%?\\t%4, %3, %1%S0"
+ [(set_attr "predicable" "yes")
+ (set_attr "predicable_short_it" "no")
+ (set_attr "conds" "set")
+ (set_attr "shift" "1")
+ (set (attr "type") (if_then_else (match_operand 2
"const_int_operand" "")
+ (const_string "logic_shift_imm")
+ (const_string "logic_shift_reg")))]
+)
+
+(define_insn "andsi_not_shiftsi_si_scc"
+ [(parallel [(set (reg:CC_NOOV CC_REGNUM)
+ (compare:CC_NOOV
+ (and:SI (not:SI (match_operator:SI 0 "shift_operator"
+ [(match_operand:SI 1 "s_register_operand" "r")
+ (match_operand:SI 2 "arm_rhs_operand" "rM")]))
+ (match_operand:SI 3 "s_register_operand" "r"))
+ (const_int 0)))
+ (set (match_operand:SI 4 "s_register_operand" "=r")
+ (and:SI (not:SI (match_op_dup 0
+ [(match_dup 1)
+ (match_dup 2)]))
+ (match_dup 3)))])]
+ "TARGET_32BIT"
+ "bic%.%?\\t%4, %3, %1%S0"
+ [(set_attr "predicable" "yes")
+ (set_attr "predicable_short_it" "no")
+ (set_attr "conds" "set")
+ (set_attr "shift" "1")
+ (set (attr "type") (if_then_else (match_operand 2
"const_int_operand" "")
+ (const_string "logic_shift_imm")
+ (const_string "logic_shift_reg")))]
+)
+
(define_insn "*andsi_notsi_si_compare0"
[(set (reg:CC_NOOV CC_REGNUM)
(compare:CC_NOOV
diff --git a/gcc/testsuite/gcc.target/arm/bics_1.c
b/gcc/testsuite/gcc.target/arm/bics_1.c
new file mode 100644
index 0000000..173eb89
--- /dev/null
+++ b/gcc/testsuite/gcc.target/arm/bics_1.c
@@ -0,0 +1,54 @@
+/* { dg-do run } */
+/* { dg-options "-O2 --save-temps -fno-inline" } */
+/* { dg-require-effective-target arm32 } */
+
+extern void abort (void);
+
+int
+bics_si_test1 (int a, int b, int c)
+{
+ int d = a & ~b;
+
+ /* { dg-final { scan-assembler-times "bics\tr\[0-9\]+, r\[0-9\]+,
r\[0-9\]+" 2 } } */
+ if (d == 0)
+ return a + c;
+ else
+ return b + d + c;
+}
+
+int
+bics_si_test2 (int a, int b, int c)
+{
+ int d = a & ~(b << 3);
+
+ /* { dg-final { scan-assembler-times "bics\tr\[0-9\]+, r\[0-9\]+,
r\[0-9\]+, .sl \#3" 1 } } */
+ if (d == 0)
+ return a + c;
+ else
+ return b + d + c;
+}
+
+int
+main ()
+{
+ int x;
+
+ x = bics_si_test1 (29, ~4, 5);
+ if (x != ((29 & 4) + ~4 + 5))
+ abort ();
+
+ x = bics_si_test1 (5, ~2, 20);
+ if (x != 25)
+ abort ();
+
+ x = bics_si_test2 (35, ~4, 5);
+ if (x != ((35 & ~(~4 << 3)) + ~4 + 5))
+ abort ();
+
+ x = bics_si_test2 (96, ~2, 20);
+ if (x != 116)
+ abort ();
+
+ return 0;
+}
+/* { dg-final { cleanup-saved-temps } } */
diff --git a/gcc/testsuite/gcc.target/arm/bics_2.c
b/gcc/testsuite/gcc.target/arm/bics_2.c
new file mode 100644
index 0000000..740d7c9
--- /dev/null
+++ b/gcc/testsuite/gcc.target/arm/bics_2.c
@@ -0,0 +1,57 @@
+/* { dg-do run } */
+/* { dg-options "-O2 --save-temps -fno-inline" } */
+/* { dg-require-effective-target arm32 } */
+
+extern void abort (void);
+
+int
+bics_si_test1 (int a, int b, int c)
+{
+ int d = a & ~b;
+
+ /* { dg-final { scan-assembler-not "bics\tr\[0-9\]+, r\[0-9\]+,
r\[0-9\]+" } } */
+ /* { dg-final { scan-assembler-times "bic\tr\[0-9\]+, r\[0-9\]+,
r\[0-9\]+" 2 } } */
+ if (d <= 0)
+ return a + c;
+ else
+ return b + d + c;
+}
+
+int
+bics_si_test2 (int a, int b, int c)
+{
+ int d = a & ~(b << 3);
+
+ /* { dg-final { scan-assembler-not "bics\tr\[0-9\]+, r\[0-9\]+,
r\[0-9\]+, .sl \#3" } } */
+ /* { dg-final { scan-assembler "bic\tr\[0-9\]+, r\[0-9\]+, r\[0-9\]+,
.sl \#3" } } */
+ if (d <= 0)
+ return a + c;
+ else
+ return b + d + c;
+}
+
+int
+main ()
+{
+ int x;
+
+ x = bics_si_test1 (29, ~4, 5);
+ if (x != ((29 & 4) + ~4 + 5))
+ abort ();
+
+ x = bics_si_test1 (5, ~2, 20);
+ if (x != 25)
+ abort ();
+
+ x = bics_si_test2 (35, ~4, 5);
+ if (x != ((35 & ~(~4 << 3)) + ~4 + 5))
+ abort ();
+
+ x = bics_si_test2 (96, ~2, 20);
+ if (x != 116)
+ abort ();
+
+ return 0;
+}
+
+/* { dg-final { cleanup-saved-temps } } */
diff --git a/gcc/testsuite/gcc.target/arm/bics_3.c
b/gcc/testsuite/gcc.target/arm/bics_3.c
new file mode 100644
index 0000000..e2b1c72
--- /dev/null
+++ b/gcc/testsuite/gcc.target/arm/bics_3.c
@@ -0,0 +1,41 @@
+/* { dg-do run } */
+/* { dg-options "-O2 --save-temps -fno-inline" } */
+/* { dg-require-effective-target arm32 } */
+
+extern void abort (void);
+
+int
+bics_si_test (int a, int b)
+{
+ if (a & ~b)
+ return 1;
+ else
+ return 0;
+}
+
+int
+bics_si_test2 (int a, int b)
+{
+ if (a & ~ (b << 2))
+ return 1;
+ else
+ return 0;
+}
+
+int
+main (void)
+{
+ int a = 5;
+ int b = 5;
+ int c = 20;
+ if (bics_si_test (a, b))
+ abort ();
+ if (bics_si_test2 (c, b))
+ abort ();
+ return 0;
+}
+
+/* { dg-final { scan-assembler-times "bics\tr\[0-9\]+, r\[0-9\]+,
r\[0-9\]+" 2 } } */
+/* { dg-final { scan-assembler-times "bics\tr\[0-9\]+, r\[0-9\]+,
r\[0-9\]+, .sl #2" 1 } } */
+
+/* { dg-final { cleanup-saved-temps } } */
diff --git a/gcc/testsuite/gcc.target/arm/bics_4.c
b/gcc/testsuite/gcc.target/arm/bics_4.c
new file mode 100644
index 0000000..8f2faf0
--- /dev/null
+++ b/gcc/testsuite/gcc.target/arm/bics_4.c
@@ -0,0 +1,49 @@
+/* { dg-do run } */
+/* { dg-options "-O2 --save-temps -fno-inline" } */
+/* { dg-require-effective-target arm32 } */
+
+extern void abort (void);
+
+int
+bics_si_test1 (int a, int b, int c)
+{
+ if ((a & b) == a)
+ return a;
+ else
+ return c;
+}
+
+int
+bics_si_test2 (int a, int b, int c)
+{
+ if ((a & b) == b)
+ return b;
+ else
+ return c;
+}
+
+int
+main ()
+{
+ int x;
+ x = bics_si_test1 (0xf00d, 0xf11f, 0);
+ if (x != 0xf00d)
+ abort ();
+
+ x = bics_si_test1 (0xf11f, 0xf00d, 0);
+ if (x != 0)
+ abort ();
+
+ x = bics_si_test2 (0xf00d, 0xf11f, 0);
+ if (x != 0)
+ abort ();
+
+ x = bics_si_test2 (0xf11f, 0xf00d, 0);
+ if (x != 0xf00d)
+ abort ();
+
+ return 0;
+}
+
+/* { dg-final { scan-assembler-times "bics\tr\[0-9\]+, r\[0-9\]+,
r\[0-9\]+" 2 } } */
+/* { dg-final { cleanup-saved-temps } } */
--
1.8.1.2
^ permalink raw reply [flat|nested] 8+ messages in thread* Re: [PATCH] [AArch32] Additional bics patterns.
2015-04-24 15:41 ` Alex Velenko
@ 2015-04-27 14:02 ` Alex Velenko
2015-05-01 9:28 ` Kyrill Tkachov
1 sibling, 0 replies; 8+ messages in thread
From: Alex Velenko @ 2015-04-27 14:02 UTC (permalink / raw)
To: Kyrylo Tkachov, gcc-patches; +Cc: Ramana Radhakrishnan
On 24/04/15 16:41, Alex Velenko wrote:
> Hi,
>
> This patch adds rtl patterns to generate bics instructions with shift.
>
> Added attribute predicable_short_it since last respin.
>
> Done full regression run on arm-none-eabi and arm-none-gnueabihf.
> Bootstrapped on arm-none-gnueabihf.
>
> Is this patch ok?
>
> gcc/config
>
> 2015-04-24 Alex Velenko <Alex.Velenko@arm.com>
>
> * arm/arm.md (andsi_not_shiftsi_si_scc): New pattern.
> * (andsi_not_shiftsi_si_scc_no_reuse): New pattern.
>
> gcc/testsuite
>
> 2015-04-24 Alex Velenko <Alex.Velenko@arm.com>
>
> * gcc.target/arm/bics_1.c : New testcase.
> * gcc.target/arm/bics_2.c : New testcase.
> * gcc.target/arm/bics_3.c : New testcase.
> * gcc.target/arm/bics_4.c : New testcase.
> ---
> gcc/config/arm/arm.md | 44 +++++++++++++++++++++++++++
> gcc/testsuite/gcc.target/arm/bics_1.c | 54
> +++++++++++++++++++++++++++++++++
> gcc/testsuite/gcc.target/arm/bics_2.c | 57
> +++++++++++++++++++++++++++++++++++
> gcc/testsuite/gcc.target/arm/bics_3.c | 41 +++++++++++++++++++++++++
> gcc/testsuite/gcc.target/arm/bics_4.c | 49
> ++++++++++++++++++++++++++++++
> 5 files changed, 245 insertions(+)
> create mode 100644 gcc/testsuite/gcc.target/arm/bics_1.c
> create mode 100644 gcc/testsuite/gcc.target/arm/bics_2.c
> create mode 100644 gcc/testsuite/gcc.target/arm/bics_3.c
> create mode 100644 gcc/testsuite/gcc.target/arm/bics_4.c
>
> diff --git a/gcc/config/arm/arm.md b/gcc/config/arm/arm.md
> index 164ac13..9e774c1 100644
> --- a/gcc/config/arm/arm.md
> +++ b/gcc/config/arm/arm.md
> @@ -2768,6 +2768,50 @@
> (const_string "logic_shift_reg")))]
> )
>
> +(define_insn "andsi_not_shiftsi_si_scc_no_reuse"
> + [(set (reg:CC_NOOV CC_REGNUM)
> + (compare:CC_NOOV
> + (and:SI (not:SI (match_operator:SI 0 "shift_operator"
> + [(match_operand:SI 1 "s_register_operand" "r")
> + (match_operand:SI 2 "arm_rhs_operand" "rM")]))
> + (match_operand:SI 3 "s_register_operand" "r"))
> + (const_int 0)))
> + (clobber (match_scratch:SI 4 "=r"))]
> + "TARGET_32BIT"
> + "bic%.%?\\t%4, %3, %1%S0"
> + [(set_attr "predicable" "yes")
> + (set_attr "predicable_short_it" "no")
> + (set_attr "conds" "set")
> + (set_attr "shift" "1")
> + (set (attr "type") (if_then_else (match_operand 2
> "const_int_operand" "")
> + (const_string "logic_shift_imm")
> + (const_string "logic_shift_reg")))]
> +)
> +
> +(define_insn "andsi_not_shiftsi_si_scc"
> + [(parallel [(set (reg:CC_NOOV CC_REGNUM)
> + (compare:CC_NOOV
> + (and:SI (not:SI (match_operator:SI 0 "shift_operator"
> + [(match_operand:SI 1 "s_register_operand" "r")
> + (match_operand:SI 2 "arm_rhs_operand" "rM")]))
> + (match_operand:SI 3 "s_register_operand" "r"))
> + (const_int 0)))
> + (set (match_operand:SI 4 "s_register_operand" "=r")
> + (and:SI (not:SI (match_op_dup 0
> + [(match_dup 1)
> + (match_dup 2)]))
> + (match_dup 3)))])]
> + "TARGET_32BIT"
> + "bic%.%?\\t%4, %3, %1%S0"
> + [(set_attr "predicable" "yes")
> + (set_attr "predicable_short_it" "no")
> + (set_attr "conds" "set")
> + (set_attr "shift" "1")
> + (set (attr "type") (if_then_else (match_operand 2
> "const_int_operand" "")
> + (const_string "logic_shift_imm")
> + (const_string "logic_shift_reg")))]
> +)
> +
> (define_insn "*andsi_notsi_si_compare0"
> [(set (reg:CC_NOOV CC_REGNUM)
> (compare:CC_NOOV
> diff --git a/gcc/testsuite/gcc.target/arm/bics_1.c
> b/gcc/testsuite/gcc.target/arm/bics_1.c
> new file mode 100644
> index 0000000..173eb89
> --- /dev/null
> +++ b/gcc/testsuite/gcc.target/arm/bics_1.c
> @@ -0,0 +1,54 @@
> +/* { dg-do run } */
> +/* { dg-options "-O2 --save-temps -fno-inline" } */
> +/* { dg-require-effective-target arm32 } */
> +
> +extern void abort (void);
> +
> +int
> +bics_si_test1 (int a, int b, int c)
> +{
> + int d = a & ~b;
> +
> + /* { dg-final { scan-assembler-times "bics\tr\[0-9\]+, r\[0-9\]+,
> r\[0-9\]+" 2 } } */
> + if (d == 0)
> + return a + c;
> + else
> + return b + d + c;
> +}
> +
> +int
> +bics_si_test2 (int a, int b, int c)
> +{
> + int d = a & ~(b << 3);
> +
> + /* { dg-final { scan-assembler-times "bics\tr\[0-9\]+, r\[0-9\]+,
> r\[0-9\]+, .sl \#3" 1 } } */
> + if (d == 0)
> + return a + c;
> + else
> + return b + d + c;
> +}
> +
> +int
> +main ()
> +{
> + int x;
> +
> + x = bics_si_test1 (29, ~4, 5);
> + if (x != ((29 & 4) + ~4 + 5))
> + abort ();
> +
> + x = bics_si_test1 (5, ~2, 20);
> + if (x != 25)
> + abort ();
> +
> + x = bics_si_test2 (35, ~4, 5);
> + if (x != ((35 & ~(~4 << 3)) + ~4 + 5))
> + abort ();
> +
> + x = bics_si_test2 (96, ~2, 20);
> + if (x != 116)
> + abort ();
> +
> + return 0;
> +}
> +/* { dg-final { cleanup-saved-temps } } */
> diff --git a/gcc/testsuite/gcc.target/arm/bics_2.c
> b/gcc/testsuite/gcc.target/arm/bics_2.c
> new file mode 100644
> index 0000000..740d7c9
> --- /dev/null
> +++ b/gcc/testsuite/gcc.target/arm/bics_2.c
> @@ -0,0 +1,57 @@
> +/* { dg-do run } */
> +/* { dg-options "-O2 --save-temps -fno-inline" } */
> +/* { dg-require-effective-target arm32 } */
> +
> +extern void abort (void);
> +
> +int
> +bics_si_test1 (int a, int b, int c)
> +{
> + int d = a & ~b;
> +
> + /* { dg-final { scan-assembler-not "bics\tr\[0-9\]+, r\[0-9\]+,
> r\[0-9\]+" } } */
> + /* { dg-final { scan-assembler-times "bic\tr\[0-9\]+, r\[0-9\]+,
> r\[0-9\]+" 2 } } */
> + if (d <= 0)
> + return a + c;
> + else
> + return b + d + c;
> +}
> +
> +int
> +bics_si_test2 (int a, int b, int c)
> +{
> + int d = a & ~(b << 3);
> +
> + /* { dg-final { scan-assembler-not "bics\tr\[0-9\]+, r\[0-9\]+,
> r\[0-9\]+, .sl \#3" } } */
> + /* { dg-final { scan-assembler "bic\tr\[0-9\]+, r\[0-9\]+,
> r\[0-9\]+, .sl \#3" } } */
> + if (d <= 0)
> + return a + c;
> + else
> + return b + d + c;
> +}
> +
> +int
> +main ()
> +{
> + int x;
> +
> + x = bics_si_test1 (29, ~4, 5);
> + if (x != ((29 & 4) + ~4 + 5))
> + abort ();
> +
> + x = bics_si_test1 (5, ~2, 20);
> + if (x != 25)
> + abort ();
> +
> + x = bics_si_test2 (35, ~4, 5);
> + if (x != ((35 & ~(~4 << 3)) + ~4 + 5))
> + abort ();
> +
> + x = bics_si_test2 (96, ~2, 20);
> + if (x != 116)
> + abort ();
> +
> + return 0;
> +}
> +
> +/* { dg-final { cleanup-saved-temps } } */
> diff --git a/gcc/testsuite/gcc.target/arm/bics_3.c
> b/gcc/testsuite/gcc.target/arm/bics_3.c
> new file mode 100644
> index 0000000..e2b1c72
> --- /dev/null
> +++ b/gcc/testsuite/gcc.target/arm/bics_3.c
> @@ -0,0 +1,41 @@
> +/* { dg-do run } */
> +/* { dg-options "-O2 --save-temps -fno-inline" } */
> +/* { dg-require-effective-target arm32 } */
> +
> +extern void abort (void);
> +
> +int
> +bics_si_test (int a, int b)
> +{
> + if (a & ~b)
> + return 1;
> + else
> + return 0;
> +}
> +
> +int
> +bics_si_test2 (int a, int b)
> +{
> + if (a & ~ (b << 2))
> + return 1;
> + else
> + return 0;
> +}
> +
> +int
> +main (void)
> +{
> + int a = 5;
> + int b = 5;
> + int c = 20;
> + if (bics_si_test (a, b))
> + abort ();
> + if (bics_si_test2 (c, b))
> + abort ();
> + return 0;
> +}
> +
> +/* { dg-final { scan-assembler-times "bics\tr\[0-9\]+, r\[0-9\]+,
> r\[0-9\]+" 2 } } */
> +/* { dg-final { scan-assembler-times "bics\tr\[0-9\]+, r\[0-9\]+,
> r\[0-9\]+, .sl #2" 1 } } */
> +
> +/* { dg-final { cleanup-saved-temps } } */
> diff --git a/gcc/testsuite/gcc.target/arm/bics_4.c
> b/gcc/testsuite/gcc.target/arm/bics_4.c
> new file mode 100644
> index 0000000..8f2faf0
> --- /dev/null
> +++ b/gcc/testsuite/gcc.target/arm/bics_4.c
> @@ -0,0 +1,49 @@
> +/* { dg-do run } */
> +/* { dg-options "-O2 --save-temps -fno-inline" } */
> +/* { dg-require-effective-target arm32 } */
> +
> +extern void abort (void);
> +
> +int
> +bics_si_test1 (int a, int b, int c)
> +{
> + if ((a & b) == a)
> + return a;
> + else
> + return c;
> +}
> +
> +int
> +bics_si_test2 (int a, int b, int c)
> +{
> + if ((a & b) == b)
> + return b;
> + else
> + return c;
> +}
> +
> +int
> +main ()
> +{
> + int x;
> + x = bics_si_test1 (0xf00d, 0xf11f, 0);
> + if (x != 0xf00d)
> + abort ();
> +
> + x = bics_si_test1 (0xf11f, 0xf00d, 0);
> + if (x != 0)
> + abort ();
> +
> + x = bics_si_test2 (0xf00d, 0xf11f, 0);
> + if (x != 0)
> + abort ();
> +
> + x = bics_si_test2 (0xf11f, 0xf00d, 0);
> + if (x != 0xf00d)
> + abort ();
> +
> + return 0;
> +}
> +
> +/* { dg-final { scan-assembler-times "bics\tr\[0-9\]+, r\[0-9\]+,
> r\[0-9\]+" 2 } } */
> +/* { dg-final { cleanup-saved-temps } } */
Ping.
^ permalink raw reply [flat|nested] 8+ messages in thread* Re: [PATCH] [AArch32] Additional bics patterns.
2015-04-24 15:41 ` Alex Velenko
2015-04-27 14:02 ` Alex Velenko
@ 2015-05-01 9:28 ` Kyrill Tkachov
2015-05-15 17:59 ` Alex Velenko
1 sibling, 1 reply; 8+ messages in thread
From: Kyrill Tkachov @ 2015-05-01 9:28 UTC (permalink / raw)
To: Alex Velenko, gcc-patches; +Cc: Ramana Radhakrishnan
On 24/04/15 16:41, Alex Velenko wrote:
> Hi,
>
> This patch adds rtl patterns to generate bics instructions with shift.
>
> Added attribute predicable_short_it since last respin.
>
> Done full regression run on arm-none-eabi and arm-none-gnueabihf.
> Bootstrapped on arm-none-gnueabihf.
>
> Is this patch ok?
>
> gcc/config
>
> 2015-04-24 Alex Velenko <Alex.Velenko@arm.com>
>
> * arm/arm.md (andsi_not_shiftsi_si_scc): New pattern.
> * (andsi_not_shiftsi_si_scc_no_reuse): New pattern.
As mentioned before, the ChangeLog entry for arm.md should
have the correct path:
* config/arm/arm.md (andsi_not_shiftsi_si_scc): New pattern.
(andsi_not_shiftsi_si_scc_no_reuse): Likewise.
Can you please confirm that bootstraps with both arm and thumb pass?
That is, configured with --with-mode=arm and --with-mode=thumb
If no problems there, then ok with the fixed ChangeLog entry.
Thanks,
Kyrill
> gcc/testsuite
>
> 2015-04-24 Alex Velenko <Alex.Velenko@arm.com>
>
> * gcc.target/arm/bics_1.c : New testcase.
> * gcc.target/arm/bics_2.c : New testcase.
> * gcc.target/arm/bics_3.c : New testcase.
> * gcc.target/arm/bics_4.c : New testcase.
> ---
> gcc/config/arm/arm.md | 44 +++++++++++++++++++++++++++
> gcc/testsuite/gcc.target/arm/bics_1.c | 54
> +++++++++++++++++++++++++++++++++
> gcc/testsuite/gcc.target/arm/bics_2.c | 57
> +++++++++++++++++++++++++++++++++++
> gcc/testsuite/gcc.target/arm/bics_3.c | 41 +++++++++++++++++++++++++
> gcc/testsuite/gcc.target/arm/bics_4.c | 49 ++++++++++++++++++++++++++++++
> 5 files changed, 245 insertions(+)
> create mode 100644 gcc/testsuite/gcc.target/arm/bics_1.c
> create mode 100644 gcc/testsuite/gcc.target/arm/bics_2.c
> create mode 100644 gcc/testsuite/gcc.target/arm/bics_3.c
> create mode 100644 gcc/testsuite/gcc.target/arm/bics_4.c
>
> diff --git a/gcc/config/arm/arm.md b/gcc/config/arm/arm.md
> index 164ac13..9e774c1 100644
> --- a/gcc/config/arm/arm.md
> +++ b/gcc/config/arm/arm.md
> @@ -2768,6 +2768,50 @@
> (const_string "logic_shift_reg")))]
> )
>
> +(define_insn "andsi_not_shiftsi_si_scc_no_reuse"
> + [(set (reg:CC_NOOV CC_REGNUM)
> + (compare:CC_NOOV
> + (and:SI (not:SI (match_operator:SI 0 "shift_operator"
> + [(match_operand:SI 1 "s_register_operand" "r")
> + (match_operand:SI 2 "arm_rhs_operand" "rM")]))
> + (match_operand:SI 3 "s_register_operand" "r"))
> + (const_int 0)))
> + (clobber (match_scratch:SI 4 "=r"))]
> + "TARGET_32BIT"
> + "bic%.%?\\t%4, %3, %1%S0"
> + [(set_attr "predicable" "yes")
> + (set_attr "predicable_short_it" "no")
> + (set_attr "conds" "set")
> + (set_attr "shift" "1")
> + (set (attr "type") (if_then_else (match_operand 2
> "const_int_operand" "")
> + (const_string "logic_shift_imm")
> + (const_string "logic_shift_reg")))]
> +)
> +
> +(define_insn "andsi_not_shiftsi_si_scc"
> + [(parallel [(set (reg:CC_NOOV CC_REGNUM)
> + (compare:CC_NOOV
> + (and:SI (not:SI (match_operator:SI 0 "shift_operator"
> + [(match_operand:SI 1 "s_register_operand" "r")
> + (match_operand:SI 2 "arm_rhs_operand" "rM")]))
> + (match_operand:SI 3 "s_register_operand" "r"))
> + (const_int 0)))
> + (set (match_operand:SI 4 "s_register_operand" "=r")
> + (and:SI (not:SI (match_op_dup 0
> + [(match_dup 1)
> + (match_dup 2)]))
> + (match_dup 3)))])]
> + "TARGET_32BIT"
> + "bic%.%?\\t%4, %3, %1%S0"
> + [(set_attr "predicable" "yes")
> + (set_attr "predicable_short_it" "no")
> + (set_attr "conds" "set")
> + (set_attr "shift" "1")
> + (set (attr "type") (if_then_else (match_operand 2
> "const_int_operand" "")
> + (const_string "logic_shift_imm")
> + (const_string "logic_shift_reg")))]
> +)
> +
> (define_insn "*andsi_notsi_si_compare0"
> [(set (reg:CC_NOOV CC_REGNUM)
> (compare:CC_NOOV
> diff --git a/gcc/testsuite/gcc.target/arm/bics_1.c
> b/gcc/testsuite/gcc.target/arm/bics_1.c
> new file mode 100644
> index 0000000..173eb89
> --- /dev/null
> +++ b/gcc/testsuite/gcc.target/arm/bics_1.c
> @@ -0,0 +1,54 @@
> +/* { dg-do run } */
> +/* { dg-options "-O2 --save-temps -fno-inline" } */
> +/* { dg-require-effective-target arm32 } */
> +
> +extern void abort (void);
> +
> +int
> +bics_si_test1 (int a, int b, int c)
> +{
> + int d = a & ~b;
> +
> + /* { dg-final { scan-assembler-times "bics\tr\[0-9\]+, r\[0-9\]+,
> r\[0-9\]+" 2 } } */
> + if (d == 0)
> + return a + c;
> + else
> + return b + d + c;
> +}
> +
> +int
> +bics_si_test2 (int a, int b, int c)
> +{
> + int d = a & ~(b << 3);
> +
> + /* { dg-final { scan-assembler-times "bics\tr\[0-9\]+, r\[0-9\]+,
> r\[0-9\]+, .sl \#3" 1 } } */
> + if (d == 0)
> + return a + c;
> + else
> + return b + d + c;
> +}
> +
> +int
> +main ()
> +{
> + int x;
> +
> + x = bics_si_test1 (29, ~4, 5);
> + if (x != ((29 & 4) + ~4 + 5))
> + abort ();
> +
> + x = bics_si_test1 (5, ~2, 20);
> + if (x != 25)
> + abort ();
> +
> + x = bics_si_test2 (35, ~4, 5);
> + if (x != ((35 & ~(~4 << 3)) + ~4 + 5))
> + abort ();
> +
> + x = bics_si_test2 (96, ~2, 20);
> + if (x != 116)
> + abort ();
> +
> + return 0;
> +}
> +/* { dg-final { cleanup-saved-temps } } */
> diff --git a/gcc/testsuite/gcc.target/arm/bics_2.c
> b/gcc/testsuite/gcc.target/arm/bics_2.c
> new file mode 100644
> index 0000000..740d7c9
> --- /dev/null
> +++ b/gcc/testsuite/gcc.target/arm/bics_2.c
> @@ -0,0 +1,57 @@
> +/* { dg-do run } */
> +/* { dg-options "-O2 --save-temps -fno-inline" } */
> +/* { dg-require-effective-target arm32 } */
> +
> +extern void abort (void);
> +
> +int
> +bics_si_test1 (int a, int b, int c)
> +{
> + int d = a & ~b;
> +
> + /* { dg-final { scan-assembler-not "bics\tr\[0-9\]+, r\[0-9\]+,
> r\[0-9\]+" } } */
> + /* { dg-final { scan-assembler-times "bic\tr\[0-9\]+, r\[0-9\]+,
> r\[0-9\]+" 2 } } */
> + if (d <= 0)
> + return a + c;
> + else
> + return b + d + c;
> +}
> +
> +int
> +bics_si_test2 (int a, int b, int c)
> +{
> + int d = a & ~(b << 3);
> +
> + /* { dg-final { scan-assembler-not "bics\tr\[0-9\]+, r\[0-9\]+,
> r\[0-9\]+, .sl \#3" } } */
> + /* { dg-final { scan-assembler "bic\tr\[0-9\]+, r\[0-9\]+, r\[0-9\]+,
> .sl \#3" } } */
> + if (d <= 0)
> + return a + c;
> + else
> + return b + d + c;
> +}
> +
> +int
> +main ()
> +{
> + int x;
> +
> + x = bics_si_test1 (29, ~4, 5);
> + if (x != ((29 & 4) + ~4 + 5))
> + abort ();
> +
> + x = bics_si_test1 (5, ~2, 20);
> + if (x != 25)
> + abort ();
> +
> + x = bics_si_test2 (35, ~4, 5);
> + if (x != ((35 & ~(~4 << 3)) + ~4 + 5))
> + abort ();
> +
> + x = bics_si_test2 (96, ~2, 20);
> + if (x != 116)
> + abort ();
> +
> + return 0;
> +}
> +
> +/* { dg-final { cleanup-saved-temps } } */
> diff --git a/gcc/testsuite/gcc.target/arm/bics_3.c
> b/gcc/testsuite/gcc.target/arm/bics_3.c
> new file mode 100644
> index 0000000..e2b1c72
> --- /dev/null
> +++ b/gcc/testsuite/gcc.target/arm/bics_3.c
> @@ -0,0 +1,41 @@
> +/* { dg-do run } */
> +/* { dg-options "-O2 --save-temps -fno-inline" } */
> +/* { dg-require-effective-target arm32 } */
> +
> +extern void abort (void);
> +
> +int
> +bics_si_test (int a, int b)
> +{
> + if (a & ~b)
> + return 1;
> + else
> + return 0;
> +}
> +
> +int
> +bics_si_test2 (int a, int b)
> +{
> + if (a & ~ (b << 2))
> + return 1;
> + else
> + return 0;
> +}
> +
> +int
> +main (void)
> +{
> + int a = 5;
> + int b = 5;
> + int c = 20;
> + if (bics_si_test (a, b))
> + abort ();
> + if (bics_si_test2 (c, b))
> + abort ();
> + return 0;
> +}
> +
> +/* { dg-final { scan-assembler-times "bics\tr\[0-9\]+, r\[0-9\]+,
> r\[0-9\]+" 2 } } */
> +/* { dg-final { scan-assembler-times "bics\tr\[0-9\]+, r\[0-9\]+,
> r\[0-9\]+, .sl #2" 1 } } */
> +
> +/* { dg-final { cleanup-saved-temps } } */
> diff --git a/gcc/testsuite/gcc.target/arm/bics_4.c
> b/gcc/testsuite/gcc.target/arm/bics_4.c
> new file mode 100644
> index 0000000..8f2faf0
> --- /dev/null
> +++ b/gcc/testsuite/gcc.target/arm/bics_4.c
> @@ -0,0 +1,49 @@
> +/* { dg-do run } */
> +/* { dg-options "-O2 --save-temps -fno-inline" } */
> +/* { dg-require-effective-target arm32 } */
> +
> +extern void abort (void);
> +
> +int
> +bics_si_test1 (int a, int b, int c)
> +{
> + if ((a & b) == a)
> + return a;
> + else
> + return c;
> +}
> +
> +int
> +bics_si_test2 (int a, int b, int c)
> +{
> + if ((a & b) == b)
> + return b;
> + else
> + return c;
> +}
> +
> +int
> +main ()
> +{
> + int x;
> + x = bics_si_test1 (0xf00d, 0xf11f, 0);
> + if (x != 0xf00d)
> + abort ();
> +
> + x = bics_si_test1 (0xf11f, 0xf00d, 0);
> + if (x != 0)
> + abort ();
> +
> + x = bics_si_test2 (0xf00d, 0xf11f, 0);
> + if (x != 0)
> + abort ();
> +
> + x = bics_si_test2 (0xf11f, 0xf00d, 0);
> + if (x != 0xf00d)
> + abort ();
> +
> + return 0;
> +}
> +
> +/* { dg-final { scan-assembler-times "bics\tr\[0-9\]+, r\[0-9\]+,
> r\[0-9\]+" 2 } } */
> +/* { dg-final { cleanup-saved-temps } } */
^ permalink raw reply [flat|nested] 8+ messages in thread* Re: [PATCH] [AArch32] Additional bics patterns.
2015-05-01 9:28 ` Kyrill Tkachov
@ 2015-05-15 17:59 ` Alex Velenko
2015-05-18 8:31 ` Kyrill Tkachov
0 siblings, 1 reply; 8+ messages in thread
From: Alex Velenko @ 2015-05-15 17:59 UTC (permalink / raw)
To: Kyrill Tkachov, gcc-patches; +Cc: Ramana Radhakrishnan
On 01/05/15 10:28, Kyrill Tkachov wrote:
>
> Can you please confirm that bootstraps with both arm and thumb pass?
> That is, configured with --with-mode=arm and --with-mode=thumb
>
Hi Kyrill,
Bootstrapped on arm-none-gnueabihf with arm and thumb mode.
Following patch requires bics shift operand on Thumb2 to be
const int, as bics shifted by register is not supported by
Thumb2.
Is patch ok?
gcc
2015-05-15 Alex Velenko <Alex.Velenko@arm.com>
* config/arm/arm.md (andsi_not_shiftsi_si_scc): New pattern.
* (andsi_not_shiftsi_si_scc_no_reuse): New pattern.
gcc/testsuite
2015-05-15 Alex Velenko <Alex.Velenko@arm.com>
* gcc.target/arm/bics_1.c : New testcase.
* gcc.target/arm/bics_2.c : New testcase.
* gcc.target/arm/bics_3.c : New testcase.
* gcc.target/arm/bics_4.c : New testcase.
---
gcc/config/arm/arm.md | 49 ++++++++++++++++++++++++++++++
gcc/testsuite/gcc.target/arm/bics_1.c | 54
+++++++++++++++++++++++++++++++++
gcc/testsuite/gcc.target/arm/bics_2.c | 57
+++++++++++++++++++++++++++++++++++
gcc/testsuite/gcc.target/arm/bics_3.c | 41 +++++++++++++++++++++++++
gcc/testsuite/gcc.target/arm/bics_4.c | 49 ++++++++++++++++++++++++++++++
5 files changed, 250 insertions(+)
create mode 100644 gcc/testsuite/gcc.target/arm/bics_1.c
create mode 100644 gcc/testsuite/gcc.target/arm/bics_2.c
create mode 100644 gcc/testsuite/gcc.target/arm/bics_3.c
create mode 100644 gcc/testsuite/gcc.target/arm/bics_4.c
diff --git a/gcc/config/arm/arm.md b/gcc/config/arm/arm.md
index 164ac13..26d3ad2 100644
--- a/gcc/config/arm/arm.md
+++ b/gcc/config/arm/arm.md
@@ -2768,6 +2768,55 @@
(const_string "logic_shift_reg")))]
)
+;; Shifted bics pattern used to set up CC status register and not reusing
+;; bics output. Pattern restricts Thumb2 shift operand as bics for Thumb2
+;; does not support shift by register.
+(define_insn "andsi_not_shiftsi_si_scc_no_reuse"
+ [(set (reg:CC_NOOV CC_REGNUM)
+ (compare:CC_NOOV
+ (and:SI (not:SI (match_operator:SI 0 "shift_operator"
+ [(match_operand:SI 1 "s_register_operand" "r")
+ (match_operand:SI 2 "arm_rhs_operand" "rM")]))
+ (match_operand:SI 3 "s_register_operand" "r"))
+ (const_int 0)))
+ (clobber (match_scratch:SI 4 "=3Dr"))]
+ "TARGET_ARM || (TARGET_THUMB2 && CONST_INT_P (operands[2]))"
+ "bic%.%?\\t%4, %3, %1%S0"
+ [(set_attr "predicable" "yes")
+ (set_attr "predicable_short_it" "no")
+ (set_attr "conds" "set")
+ (set_attr "shift" "1")
+ (set (attr "type") (if_then_else (match_operand 2
"const_int_operand" "")
+ (const_string "logic_shift_imm")
+ (const_string "logic_shift_reg")))]
+)
+
+;; Same as andsi_not_shiftsi_si_scc_no_reuse, but the bics result is also
+;; getting reused later.
+(define_insn "andsi_not_shiftsi_si_scc"
+ [(parallel [(set (reg:CC_NOOV CC_REGNUM)
+ (compare:CC_NOOV
+ (and:SI (not:SI (match_operator:SI 0 "shift_operator"
+ [(match_operand:SI 1 "s_register_operand" "r")
+ (match_operand:SI 2 "arm_rhs_operand" "rM")]))
+ (match_operand:SI 3 "s_register_operand" "r"))
+ (const_int 0)))
+ (set (match_operand:SI 4 "s_register_operand" "=3Dr")
+ (and:SI (not:SI (match_op_dup 0
+ [(match_dup 1)
+ (match_dup 2)]))
+ (match_dup 3)))])]
+ "TARGET_ARM || (TARGET_THUMB2 && CONST_INT_P (operands[2]))"
+ "bic%.%?\\t%4, %3, %1%S0"
+ [(set_attr "predicable" "yes")
+ (set_attr "predicable_short_it" "no")
+ (set_attr "conds" "set")
+ (set_attr "shift" "1")
+ (set (attr "type") (if_then_else (match_operand 2
"const_int_operand" "")
+ (const_string "logic_shift_imm")
+ (const_string "logic_shift_reg")))]
+)
+
(define_insn "*andsi_notsi_si_compare0"
[(set (reg:CC_NOOV CC_REGNUM)
(compare:CC_NOOV
diff --git a/gcc/testsuite/gcc.target/arm/bics_1.c
b/gcc/testsuite/gcc.target/arm/bics_1.c
new file mode 100644
index 0000000..173eb89
--- /dev/null
+++ b/gcc/testsuite/gcc.target/arm/bics_1.c
@@ -0,0 +1,54 @@
+/* { dg-do run } */
+/* { dg-options "-O2 --save-temps -fno-inline" } */
+/* { dg-require-effective-target arm32 } */
+
+extern void abort (void);
+
+int
+bics_si_test1 (int a, int b, int c)
+{
+ int d =3D a & ~b;
+
+ /* { dg-final { scan-assembler-times "bics\tr\[0-9\]+, r\[0-9\]+,
r\[0-9\]+" 2 } } */
+ if (d =3D=3D 0)
+ return a + c;
+ else
+ return b + d + c;
+}
+
+int
+bics_si_test2 (int a, int b, int c)
+{
+ int d =3D a & ~(b << 3);
+
+ /* { dg-final { scan-assembler-times "bics\tr\[0-9\]+, r\[0-9\]+,
r\[0-9\]+, .sl \#3" 1 } } */
+ if (d =3D=3D 0)
+ return a + c;
+ else
+ return b + d + c;
+}
+
+int
+main ()
+{
+ int x;
+
+ x =3D bics_si_test1 (29, ~4, 5);
+ if (x !=3D ((29 & 4) + ~4 + 5))
+ abort ();
+
+ x =3D bics_si_test1 (5, ~2, 20);
+ if (x !=3D 25)
+ abort ();
+
+ x =3D bics_si_test2 (35, ~4, 5);
+ if (x !=3D ((35 & ~(~4 << 3)) + ~4 + 5))
+ abort ();
+
+ x =3D bics_si_test2 (96, ~2, 20);
+ if (x !=3D 116)
+ abort ();
+
+ return 0;
+}
+/* { dg-final { cleanup-saved-temps } } */
diff --git a/gcc/testsuite/gcc.target/arm/bics_2.c
b/gcc/testsuite/gcc.target/arm/bics_2.c
new file mode 100644
index 0000000..740d7c9
--- /dev/null
+++ b/gcc/testsuite/gcc.target/arm/bics_2.c
@@ -0,0 +1,57 @@
+/* { dg-do run } */
+/* { dg-options "-O2 --save-temps -fno-inline" } */
+/* { dg-require-effective-target arm32 } */
+
+extern void abort (void);
+
+int
+bics_si_test1 (int a, int b, int c)
+{
+ int d =3D a & ~b;
+
+ /* { dg-final { scan-assembler-not "bics\tr\[0-9\]+, r\[0-9\]+,
r\[0-9\]+" } } */
+ /* { dg-final { scan-assembler-times "bic\tr\[0-9\]+, r\[0-9\]+,
r\[0-9\]+" 2 } } */
+ if (d <=3D 0)
+ return a + c;
+ else
+ return b + d + c;
+}
+
+int
+bics_si_test2 (int a, int b, int c)
+{
+ int d =3D a & ~(b << 3);
+
+ /* { dg-final { scan-assembler-not "bics\tr\[0-9\]+, r\[0-9\]+,
r\[0-9\]+, .sl \#3" } } */
+ /* { dg-final { scan-assembler "bic\tr\[0-9\]+, r\[0-9\]+, r\[0-9\]+,
.sl \#3" } } */
+ if (d <=3D 0)
+ return a + c;
+ else
+ return b + d + c;
+}
+
+int
+main ()
+{
+ int x;
+
+ x =3D bics_si_test1 (29, ~4, 5);
+ if (x !=3D ((29 & 4) + ~4 + 5))
+ abort ();
+
+ x =3D bics_si_test1 (5, ~2, 20);
+ if (x !=3D 25)
+ abort ();
+
+ x =3D bics_si_test2 (35, ~4, 5);
+ if (x !=3D ((35 & ~(~4 << 3)) + ~4 + 5))
+ abort ();
+
+ x =3D bics_si_test2 (96, ~2, 20);
+ if (x !=3D 116)
+ abort ();
+
+ return 0;
+}
+
+/* { dg-final { cleanup-saved-temps } } */
diff --git a/gcc/testsuite/gcc.target/arm/bics_3.c
b/gcc/testsuite/gcc.target/arm/bics_3.c
new file mode 100644
index 0000000..e2b1c72
--- /dev/null
+++ b/gcc/testsuite/gcc.target/arm/bics_3.c
@@ -0,0 +1,41 @@
+/* { dg-do run } */
+/* { dg-options "-O2 --save-temps -fno-inline" } */
+/* { dg-require-effective-target arm32 } */
+
+extern void abort (void);
+
+int
+bics_si_test (int a, int b)
+{
+ if (a & ~b)
+ return 1;
+ else
+ return 0;
+}
+
+int
+bics_si_test2 (int a, int b)
+{
+ if (a & ~ (b << 2))
+ return 1;
+ else
+ return 0;
+}
+
+int
+main (void)
+{
+ int a =3D 5;
+ int b =3D 5;
+ int c =3D 20;
+ if (bics_si_test (a, b))
+ abort ();
+ if (bics_si_test2 (c, b))
+ abort ();
+ return 0;
+}
+
+/* { dg-final { scan-assembler-times "bics\tr\[0-9\]+, r\[0-9\]+,
r\[0-9\]+" 2 } } */
+/* { dg-final { scan-assembler-times "bics\tr\[0-9\]+, r\[0-9\]+,
r\[0-9\]+, .sl #2" 1 } } */
+
+/* { dg-final { cleanup-saved-temps } } */
diff --git a/gcc/testsuite/gcc.target/arm/bics_4.c
b/gcc/testsuite/gcc.target/arm/bics_4.c
new file mode 100644
index 0000000..8f2faf0
--- /dev/null
+++ b/gcc/testsuite/gcc.target/arm/bics_4.c
@@ -0,0 +1,49 @@
+/* { dg-do run } */
+/* { dg-options "-O2 --save-temps -fno-inline" } */
+/* { dg-require-effective-target arm32 } */
+
+extern void abort (void);
+
+int
+bics_si_test1 (int a, int b, int c)
+{
+ if ((a & b) =3D=3D a)
+ return a;
+ else
+ return c;
+}
+
+int
+bics_si_test2 (int a, int b, int c)
+{
+ if ((a & b) =3D=3D b)
+ return b;
+ else
+ return c;
+}
+
+int
+main ()
+{
+ int x;
+ x =3D bics_si_test1 (0xf00d, 0xf11f, 0);
+ if (x !=3D 0xf00d)
+ abort ();
+
+ x =3D bics_si_test1 (0xf11f, 0xf00d, 0);
+ if (x !=3D 0)
+ abort ();
+
+ x =3D bics_si_test2 (0xf00d, 0xf11f, 0);
+ if (x !=3D 0)
+ abort ();
+
+ x =3D bics_si_test2 (0xf11f, 0xf00d, 0);
+ if (x !=3D 0xf00d)
+ abort ();
+
+ return 0;
+}
+
+/* { dg-final { scan-assembler-times "bics\tr\[0-9\]+, r\[0-9\]+,
r\[0-9\]+" 2 } } */
+/* { dg-final { cleanup-saved-temps } } */
--
1.8.1.2
^ permalink raw reply [flat|nested] 8+ messages in thread* Re: [PATCH] [AArch32] Additional bics patterns.
2015-05-15 17:59 ` Alex Velenko
@ 2015-05-18 8:31 ` Kyrill Tkachov
2015-05-18 14:46 ` Alex Velenko
0 siblings, 1 reply; 8+ messages in thread
From: Kyrill Tkachov @ 2015-05-18 8:31 UTC (permalink / raw)
To: Alex Velenko, gcc-patches; +Cc: Ramana Radhakrishnan
Hi Alex,
On 15/05/15 18:53, Alex Velenko wrote:
> On 01/05/15 10:28, Kyrill Tkachov wrote:
>> Can you please confirm that bootstraps with both arm and thumb pass?
>> That is, configured with --with-mode=arm and --with-mode=thumb
>>
> Hi Kyrill,
>
> Bootstrapped on arm-none-gnueabihf with arm and thumb mode.
>
> Following patch requires bics shift operand on Thumb2 to be
> const int, as bics shifted by register is not supported by
> Thumb2.
>
> Is patch ok?
>
> gcc
>
> 2015-05-15 Alex Velenko <Alex.Velenko@arm.com>
>
> * config/arm/arm.md (andsi_not_shiftsi_si_scc): New pattern.
> * (andsi_not_shiftsi_si_scc_no_reuse): New pattern.
No need for the '*', just:
* config/arm/arm.md (andsi_not_shiftsi_si_scc): New pattern.
(andsi_not_shiftsi_si_scc_no_reuse): Likewise.
will do.
Ok for trunk with that ChangeLog nit.
Thanks,
Kyrill
>
> gcc/testsuite
>
> 2015-05-15 Alex Velenko <Alex.Velenko@arm.com>
>
> * gcc.target/arm/bics_1.c : New testcase.
> * gcc.target/arm/bics_2.c : New testcase.
> * gcc.target/arm/bics_3.c : New testcase.
> * gcc.target/arm/bics_4.c : New testcase.
> ---
> gcc/config/arm/arm.md | 49 ++++++++++++++++++++++++++++++
> gcc/testsuite/gcc.target/arm/bics_1.c | 54
> +++++++++++++++++++++++++++++++++
> gcc/testsuite/gcc.target/arm/bics_2.c | 57
> +++++++++++++++++++++++++++++++++++
> gcc/testsuite/gcc.target/arm/bics_3.c | 41 +++++++++++++++++++++++++
> gcc/testsuite/gcc.target/arm/bics_4.c | 49 ++++++++++++++++++++++++++++++
> 5 files changed, 250 insertions(+)
> create mode 100644 gcc/testsuite/gcc.target/arm/bics_1.c
> create mode 100644 gcc/testsuite/gcc.target/arm/bics_2.c
> create mode 100644 gcc/testsuite/gcc.target/arm/bics_3.c
> create mode 100644 gcc/testsuite/gcc.target/arm/bics_4.c
>
> diff --git a/gcc/config/arm/arm.md b/gcc/config/arm/arm.md
> index 164ac13..26d3ad2 100644
> --- a/gcc/config/arm/arm.md
> +++ b/gcc/config/arm/arm.md
> @@ -2768,6 +2768,55 @@
> (const_string "logic_shift_reg")))]
> )
>
> +;; Shifted bics pattern used to set up CC status register and not reusing
> +;; bics output. Pattern restricts Thumb2 shift operand as bics for Thumb2
> +;; does not support shift by register.
> +(define_insn "andsi_not_shiftsi_si_scc_no_reuse"
> + [(set (reg:CC_NOOV CC_REGNUM)
> + (compare:CC_NOOV
> + (and:SI (not:SI (match_operator:SI 0 "shift_operator"
> + [(match_operand:SI 1 "s_register_operand" "r")
> + (match_operand:SI 2 "arm_rhs_operand" "rM")]))
> + (match_operand:SI 3 "s_register_operand" "r"))
> + (const_int 0)))
> + (clobber (match_scratch:SI 4 "=3Dr"))]
> + "TARGET_ARM || (TARGET_THUMB2 && CONST_INT_P (operands[2]))"
> + "bic%.%?\\t%4, %3, %1%S0"
> + [(set_attr "predicable" "yes")
> + (set_attr "predicable_short_it" "no")
> + (set_attr "conds" "set")
> + (set_attr "shift" "1")
> + (set (attr "type") (if_then_else (match_operand 2
> "const_int_operand" "")
> + (const_string "logic_shift_imm")
> + (const_string "logic_shift_reg")))]
> +)
> +
> +;; Same as andsi_not_shiftsi_si_scc_no_reuse, but the bics result is also
> +;; getting reused later.
> +(define_insn "andsi_not_shiftsi_si_scc"
> + [(parallel [(set (reg:CC_NOOV CC_REGNUM)
> + (compare:CC_NOOV
> + (and:SI (not:SI (match_operator:SI 0 "shift_operator"
> + [(match_operand:SI 1 "s_register_operand" "r")
> + (match_operand:SI 2 "arm_rhs_operand" "rM")]))
> + (match_operand:SI 3 "s_register_operand" "r"))
> + (const_int 0)))
> + (set (match_operand:SI 4 "s_register_operand" "=3Dr")
> + (and:SI (not:SI (match_op_dup 0
> + [(match_dup 1)
> + (match_dup 2)]))
> + (match_dup 3)))])]
> + "TARGET_ARM || (TARGET_THUMB2 && CONST_INT_P (operands[2]))"
> + "bic%.%?\\t%4, %3, %1%S0"
> + [(set_attr "predicable" "yes")
> + (set_attr "predicable_short_it" "no")
> + (set_attr "conds" "set")
> + (set_attr "shift" "1")
> + (set (attr "type") (if_then_else (match_operand 2
> "const_int_operand" "")
> + (const_string "logic_shift_imm")
> + (const_string "logic_shift_reg")))]
> +)
> +
> (define_insn "*andsi_notsi_si_compare0"
> [(set (reg:CC_NOOV CC_REGNUM)
> (compare:CC_NOOV
> diff --git a/gcc/testsuite/gcc.target/arm/bics_1.c
> b/gcc/testsuite/gcc.target/arm/bics_1.c
> new file mode 100644
> index 0000000..173eb89
> --- /dev/null
> +++ b/gcc/testsuite/gcc.target/arm/bics_1.c
> @@ -0,0 +1,54 @@
> +/* { dg-do run } */
> +/* { dg-options "-O2 --save-temps -fno-inline" } */
> +/* { dg-require-effective-target arm32 } */
> +
> +extern void abort (void);
> +
> +int
> +bics_si_test1 (int a, int b, int c)
> +{
> + int d =3D a & ~b;
> +
> + /* { dg-final { scan-assembler-times "bics\tr\[0-9\]+, r\[0-9\]+,
> r\[0-9\]+" 2 } } */
> + if (d =3D=3D 0)
> + return a + c;
> + else
> + return b + d + c;
> +}
> +
> +int
> +bics_si_test2 (int a, int b, int c)
> +{
> + int d =3D a & ~(b << 3);
> +
> + /* { dg-final { scan-assembler-times "bics\tr\[0-9\]+, r\[0-9\]+,
> r\[0-9\]+, .sl \#3" 1 } } */
> + if (d =3D=3D 0)
> + return a + c;
> + else
> + return b + d + c;
> +}
> +
> +int
> +main ()
> +{
> + int x;
> +
> + x =3D bics_si_test1 (29, ~4, 5);
> + if (x !=3D ((29 & 4) + ~4 + 5))
> + abort ();
> +
> + x =3D bics_si_test1 (5, ~2, 20);
> + if (x !=3D 25)
> + abort ();
> +
> + x =3D bics_si_test2 (35, ~4, 5);
> + if (x !=3D ((35 & ~(~4 << 3)) + ~4 + 5))
> + abort ();
> +
> + x =3D bics_si_test2 (96, ~2, 20);
> + if (x !=3D 116)
> + abort ();
> +
> + return 0;
> +}
> +/* { dg-final { cleanup-saved-temps } } */
> diff --git a/gcc/testsuite/gcc.target/arm/bics_2.c
> b/gcc/testsuite/gcc.target/arm/bics_2.c
> new file mode 100644
> index 0000000..740d7c9
> --- /dev/null
> +++ b/gcc/testsuite/gcc.target/arm/bics_2.c
> @@ -0,0 +1,57 @@
> +/* { dg-do run } */
> +/* { dg-options "-O2 --save-temps -fno-inline" } */
> +/* { dg-require-effective-target arm32 } */
> +
> +extern void abort (void);
> +
> +int
> +bics_si_test1 (int a, int b, int c)
> +{
> + int d =3D a & ~b;
> +
> + /* { dg-final { scan-assembler-not "bics\tr\[0-9\]+, r\[0-9\]+,
> r\[0-9\]+" } } */
> + /* { dg-final { scan-assembler-times "bic\tr\[0-9\]+, r\[0-9\]+,
> r\[0-9\]+" 2 } } */
> + if (d <=3D 0)
> + return a + c;
> + else
> + return b + d + c;
> +}
> +
> +int
> +bics_si_test2 (int a, int b, int c)
> +{
> + int d =3D a & ~(b << 3);
> +
> + /* { dg-final { scan-assembler-not "bics\tr\[0-9\]+, r\[0-9\]+,
> r\[0-9\]+, .sl \#3" } } */
> + /* { dg-final { scan-assembler "bic\tr\[0-9\]+, r\[0-9\]+, r\[0-9\]+,
> .sl \#3" } } */
> + if (d <=3D 0)
> + return a + c;
> + else
> + return b + d + c;
> +}
> +
> +int
> +main ()
> +{
> + int x;
> +
> + x =3D bics_si_test1 (29, ~4, 5);
> + if (x !=3D ((29 & 4) + ~4 + 5))
> + abort ();
> +
> + x =3D bics_si_test1 (5, ~2, 20);
> + if (x !=3D 25)
> + abort ();
> +
> + x =3D bics_si_test2 (35, ~4, 5);
> + if (x !=3D ((35 & ~(~4 << 3)) + ~4 + 5))
> + abort ();
> +
> + x =3D bics_si_test2 (96, ~2, 20);
> + if (x !=3D 116)
> + abort ();
> +
> + return 0;
> +}
> +
> +/* { dg-final { cleanup-saved-temps } } */
> diff --git a/gcc/testsuite/gcc.target/arm/bics_3.c
> b/gcc/testsuite/gcc.target/arm/bics_3.c
> new file mode 100644
> index 0000000..e2b1c72
> --- /dev/null
> +++ b/gcc/testsuite/gcc.target/arm/bics_3.c
> @@ -0,0 +1,41 @@
> +/* { dg-do run } */
> +/* { dg-options "-O2 --save-temps -fno-inline" } */
> +/* { dg-require-effective-target arm32 } */
> +
> +extern void abort (void);
> +
> +int
> +bics_si_test (int a, int b)
> +{
> + if (a & ~b)
> + return 1;
> + else
> + return 0;
> +}
> +
> +int
> +bics_si_test2 (int a, int b)
> +{
> + if (a & ~ (b << 2))
> + return 1;
> + else
> + return 0;
> +}
> +
> +int
> +main (void)
> +{
> + int a =3D 5;
> + int b =3D 5;
> + int c =3D 20;
> + if (bics_si_test (a, b))
> + abort ();
> + if (bics_si_test2 (c, b))
> + abort ();
> + return 0;
> +}
> +
> +/* { dg-final { scan-assembler-times "bics\tr\[0-9\]+, r\[0-9\]+,
> r\[0-9\]+" 2 } } */
> +/* { dg-final { scan-assembler-times "bics\tr\[0-9\]+, r\[0-9\]+,
> r\[0-9\]+, .sl #2" 1 } } */
> +
> +/* { dg-final { cleanup-saved-temps } } */
> diff --git a/gcc/testsuite/gcc.target/arm/bics_4.c
> b/gcc/testsuite/gcc.target/arm/bics_4.c
> new file mode 100644
> index 0000000..8f2faf0
> --- /dev/null
> +++ b/gcc/testsuite/gcc.target/arm/bics_4.c
> @@ -0,0 +1,49 @@
> +/* { dg-do run } */
> +/* { dg-options "-O2 --save-temps -fno-inline" } */
> +/* { dg-require-effective-target arm32 } */
> +
> +extern void abort (void);
> +
> +int
> +bics_si_test1 (int a, int b, int c)
> +{
> + if ((a & b) =3D=3D a)
> + return a;
> + else
> + return c;
> +}
> +
> +int
> +bics_si_test2 (int a, int b, int c)
> +{
> + if ((a & b) =3D=3D b)
> + return b;
> + else
> + return c;
> +}
> +
> +int
> +main ()
> +{
> + int x;
> + x =3D bics_si_test1 (0xf00d, 0xf11f, 0);
> + if (x !=3D 0xf00d)
> + abort ();
> +
> + x =3D bics_si_test1 (0xf11f, 0xf00d, 0);
> + if (x !=3D 0)
> + abort ();
> +
> + x =3D bics_si_test2 (0xf00d, 0xf11f, 0);
> + if (x !=3D 0)
> + abort ();
> +
> + x =3D bics_si_test2 (0xf11f, 0xf00d, 0);
> + if (x !=3D 0xf00d)
> + abort ();
> +
> + return 0;
> +}
> +
> +/* { dg-final { scan-assembler-times "bics\tr\[0-9\]+, r\[0-9\]+,
> r\[0-9\]+" 2 } } */
> +/* { dg-final { cleanup-saved-temps } } */
> --
> 1.8.1.2
^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2015-05-18 14:42 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2015-04-22 13:13 [PATCH] [AArch32] Additional bics patterns Alex Velenko
2015-04-22 13:27 ` Kyrill Tkachov
2015-04-24 15:41 ` Alex Velenko
2015-04-27 14:02 ` Alex Velenko
2015-05-01 9:28 ` Kyrill Tkachov
2015-05-15 17:59 ` Alex Velenko
2015-05-18 8:31 ` Kyrill Tkachov
2015-05-18 14:46 ` Alex Velenko
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).