* [doc, dwarf] Update bit-rotten DWARF option documentation
@ 2016-01-20 4:31 Sandra Loosemore
2016-01-20 13:52 ` Jason Merrill
0 siblings, 1 reply; 3+ messages in thread
From: Sandra Loosemore @ 2016-01-20 4:31 UTC (permalink / raw)
To: GCC Patches; +Cc: Jason Merrill, Cary Coutant
[-- Attachment #1: Type: text/plain, Size: 1102 bytes --]
I thought it was odd to see numerous references to "DWARF 2" in the
manual and statements like "This option only works for DWARF 2", when
GCC is now emitting DWARF version 4 by default. As far as I can tell
from browsing dwarf2out.c, the options documented for "DWARF 2" actually
do apply to all supported versions of DWARF, so we might as well just
say "DWARF" throughout the documentation to avoid confusion.
I also noticed that the generic -gdwarf option, without a specific
version, was not mentioned in the manual except in a reference that said
it used to exist. :-P
I'm pretty sure this the result of the DWARF 2 specification being
wildly different than the original DWARF 1, which hasn't been supported
since GCC 3.3. Before any later versions of DWARF were added, saying
"DWARF 2" did provide useful disambiguation information, but I think
that's irrelevant now in documenting what the current version of GCC
supports.
DWARF maintainers, do you want to look this over for technical
correctness? I'll commit this in a couple days if I don't hear any
objections.
-Sandra
[-- Attachment #2: dwarf.log --]
[-- Type: text/x-log, Size: 437 bytes --]
2016-01-19 Sandra Loosemore <sandra@codesourcery.com>
gcc/
* common.opt (feliminate-dwarf2-dups): Replace references to
"DWARF 2" with just "DWARF".
* config/ia64/ia64.opt (mdwarf2-asm): Likewise.
* doc/extend.texi: Likewise.
* doc/cpp.texi: Likewise.
* doc/invoke.texi: Likewise.
(Option Summary): Add -gdwarf to list of Debugging Options.
(Debugging Options): Document -gdwarf.
* doc/contrib.texi: Spell "DWARF" like that.
[-- Attachment #3: dwarf.patch --]
[-- Type: text/x-patch, Size: 9912 bytes --]
Index: gcc/common.opt
===================================================================
--- gcc/common.opt (revision 232582)
+++ gcc/common.opt (working copy)
@@ -1234,7 +1234,7 @@ Perform early inlining.
feliminate-dwarf2-dups
Common Report Var(flag_eliminate_dwarf2_dups)
-Perform DWARF2 duplicate elimination.
+Perform DWARF duplicate elimination.
fipa-sra
Common Report Var(flag_ipa_sra) Init(0) Optimization
Index: gcc/config/ia64/ia64.opt
===================================================================
--- gcc/config/ia64/ia64.opt (revision 232582)
+++ gcc/config/ia64/ia64.opt (working copy)
@@ -103,7 +103,7 @@ Do not inline square root.
mdwarf2-asm
Target Report Mask(DWARF2_ASM)
-Enable Dwarf 2 line debug info via GNU as.
+Enable DWARF line debug info via GNU as.
mearly-stop-bits
Target Report Mask(EARLY_STOP_BITS)
Index: gcc/doc/extend.texi
===================================================================
--- gcc/doc/extend.texi (revision 232582)
+++ gcc/doc/extend.texi (working copy)
@@ -916,8 +916,8 @@ provided as built-in functions by GCC@.
GCC can allocate complex automatic variables in a noncontiguous
fashion; it's even possible for the real part to be in a register while
-the imaginary part is on the stack (or vice versa). Only the DWARF 2
-debug info format can represent this, so use of DWARF 2 is recommended.
+the imaginary part is on the stack (or vice versa). Only the DWARF
+debug info format can represent this, so use of DWARF is recommended.
If you are using the stabs debug info format, GCC describes a noncontiguous
complex variable as if it were two separate variables of noncomplex type.
If the variable's actual name is @code{foo}, the two fictitious
@@ -1075,7 +1075,7 @@ the technical report.
@end itemize
Types @code{_Decimal32}, @code{_Decimal64}, and @code{_Decimal128}
-are supported by the DWARF 2 debug information format.
+are supported by the DWARF debug information format.
@node Hex Floats
@section Hex Floats
@@ -1249,7 +1249,7 @@ is incomplete:
Pragmas to control overflow and rounding behaviors are not implemented.
@end itemize
-Fixed-point types are supported by the DWARF 2 debug information format.
+Fixed-point types are supported by the DWARF debug information format.
@node Named Address Spaces
@section Named Address Spaces
Index: gcc/doc/cpp.texi
===================================================================
--- gcc/doc/cpp.texi (revision 232582)
+++ gcc/doc/cpp.texi (working copy)
@@ -2382,7 +2382,7 @@ These macros are defined when the target
and swap operations on operands 1, 2, 4, 8 or 16 bytes in length, respectively.
@item __GCC_HAVE_DWARF2_CFI_ASM
-This macro is defined when the compiler is emitting Dwarf2 CFI directives
+This macro is defined when the compiler is emitting DWARF CFI directives
to the assembler. When this is defined, it is possible to emit those same
directives in inline assembly.
Index: gcc/doc/invoke.texi
===================================================================
--- gcc/doc/invoke.texi (revision 232583)
+++ gcc/doc/invoke.texi (working copy)
@@ -316,7 +316,7 @@ Objective-C and Objective-C++ Dialects}.
@item Debugging Options
@xref{Debugging Options,,Options for Debugging Your Program}.
-@gccoptlist{-g -g@var{level} -gcoff -gdwarf-@var{version} @gol
+@gccoptlist{-g -g@var{level} -gcoff -gdwarf -gdwarf-@var{version} @gol
-ggdb -grecord-gcc-switches -gno-record-gcc-switches @gol
-gstabs -gstabs+ -gstrict-dwarf -gno-strict-dwarf @gol
-gvms -gxcoff -gxcoff+ -gz@r{[}=@var{type}@r{]} @gol
@@ -5727,7 +5727,7 @@ information useful for debugging do not
@item -g
@opindex g
Produce debugging information in the operating system's native format
-(stabs, COFF, XCOFF, or DWARF 2)@. GDB can work with this debugging
+(stabs, COFF, XCOFF, or DWARF)@. GDB can work with this debugging
information.
On most systems that use stabs format, @option{-g} enables use of extra
@@ -5741,12 +5741,13 @@ to generate the extra information, use @
@item -ggdb
@opindex ggdb
Produce debugging information for use by GDB@. This means to use the
-most expressive format available (DWARF 2, stabs, or the native format
+most expressive format available (DWARF, stabs, or the native format
if neither of those are supported), including GDB extensions if at all
possible.
-@item -gdwarf-@var{version}
-@opindex gdwarf-@var{version}
+@item -gdwarf
+@itemx -gdwarf-@var{version}
+@opindex gdwarf
Produce debugging information in DWARF format (if that is supported).
The value of @var{version} may be either 2, 3, 4 or 5; the default version
for most targets is 4. DWARF Version 5 is only experimental.
@@ -5817,11 +5818,8 @@ Level 3 includes extra information, such
present in the program. Some debuggers support macro expansion when
you use @option{-g3}.
-@option{-gdwarf-2} does not accept a concatenated debug level, because
-GCC used to support an option @option{-gdwarf} that meant to generate
-debug information in version 1 of the DWARF format (which is very
-different from version 2), and it would have been too confusing. That
-debug format is long obsolete, but the option cannot be changed now.
+@option{-gdwarf} does not accept a concatenated debug level, to avoid
+confusion with @option{-gdwarf-@var{level}}.
Instead use an additional @option{-g@var{level}} option to change the
debug level for DWARF.
@@ -5943,9 +5941,9 @@ when producing object files.
@item -feliminate-dwarf2-dups
@opindex feliminate-dwarf2-dups
-Compress DWARF 2 debugging information by eliminating duplicated
+Compress DWARF debugging information by eliminating duplicated
information about each symbol. This option only makes sense when
-generating DWARF 2 debugging information with @option{-gdwarf-2}.
+generating DWARF debugging information.
@item -femit-struct-debug-baseonly
@opindex femit-struct-debug-baseonly
@@ -5958,7 +5956,7 @@ but at significant potential loss in typ
See @option{-femit-struct-debug-reduced} for a less aggressive option.
See @option{-femit-struct-debug-detailed} for more detailed control.
-This option works only with DWARF 2.
+This option works only with DWARF debug output.
@item -femit-struct-debug-reduced
@opindex femit-struct-debug-reduced
@@ -5972,7 +5970,7 @@ with some potential loss in type informa
See @option{-femit-struct-debug-baseonly} for a more aggressive option.
See @option{-femit-struct-debug-detailed} for more detailed control.
-This option works only with DWARF 2.
+This option works only with DWARF debug output.
@item -femit-struct-debug-detailed@r{[}=@var{spec-list}@r{]}
@opindex femit-struct-debug-detailed
@@ -6020,18 +6018,18 @@ You may need to experiment to determine
The default is @option{-femit-struct-debug-detailed=all}.
-This option works only with DWARF 2.
+This option works only with DWARF debug output.
@item -fno-dwarf2-cfi-asm
@opindex fdwarf2-cfi-asm
@opindex fno-dwarf2-cfi-asm
-Emit DWARF 2 unwind info as compiler generated @code{.eh_frame} section
+Emit DWARF unwind info as compiler generated @code{.eh_frame} section
instead of using GAS @code{.cfi_*} directives.
@item -fno-eliminate-unused-debug-types
@opindex feliminate-unused-debug-types
@opindex fno-eliminate-unused-debug-types
-Normally, when producing DWARF 2 output, GCC avoids producing debug symbol
+Normally, when producing DWARF output, GCC avoids producing debug symbol
output for types that are nowhere used in the source file being compiled.
Sometimes it is useful to have GCC emit debugging
information for all types declared in a compilation
@@ -11017,7 +11015,7 @@ that needs this handling enables it on y
@item -fasynchronous-unwind-tables
@opindex fasynchronous-unwind-tables
-Generate unwind table in DWARF 2 format, if supported by target machine. The
+Generate unwind table in DWARF format, if supported by target machine. The
table is exact at each instruction boundary, so it can be used for stack
unwinding from asynchronous events (such as debugger or garbage collector).
@@ -16427,7 +16425,7 @@ instructions. The default is to use the
@itemx -mdwarf2-asm
@opindex mno-dwarf2-asm
@opindex mdwarf2-asm
-Don't (or do) generate assembler code for the DWARF 2 line number debugging
+Don't (or do) generate assembler code for the DWARF line number debugging
info. This may be useful when not using the GNU assembler.
@item -mearly-stop-bits
@@ -21020,7 +21018,7 @@ type. This is the default.
Store (do not store) the address of the caller's frame as backchain pointer
into the callee's stack frame.
A backchain may be needed to allow debugging using tools that do not understand
-DWARF 2 call frame information.
+DWARF call frame information.
When @option{-mno-packed-stack} is in effect, the backchain pointer is stored
at the bottom of the stack frame; when @option{-mpacked-stack} is in effect,
the backchain is placed into the topmost word of the 96/160 byte register
Index: gcc/doc/contrib.texi
===================================================================
--- gcc/doc/contrib.texi (revision 232582)
+++ gcc/doc/contrib.texi (working copy)
@@ -57,7 +57,7 @@ Wolfgang Bangerth for processing tons of
Jon Beniston for his Microsoft Windows port of Java and port to Lattice Mico32.
@item
-Daniel Berlin for better DWARF2 support, faster/better optimizations,
+Daniel Berlin for better DWARF 2 support, faster/better optimizations,
improved alias analysis, plus migrating GCC to Bugzilla.
@item
@@ -350,7 +350,7 @@ and for release management.
@item
Ron Guilmette implemented the @command{protoize} and @command{unprotoize}
-tools, the support for Dwarf symbolic debugging information, and much of
+tools, the support for DWARF symbolic debugging information, and much of
the support for System V Release 4. He has also worked heavily on the
Intel 386 and 860 support.
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [doc, dwarf] Update bit-rotten DWARF option documentation
2016-01-20 4:31 [doc, dwarf] Update bit-rotten DWARF option documentation Sandra Loosemore
@ 2016-01-20 13:52 ` Jason Merrill
2016-01-21 1:01 ` Sandra Loosemore
0 siblings, 1 reply; 3+ messages in thread
From: Jason Merrill @ 2016-01-20 13:52 UTC (permalink / raw)
To: Sandra Loosemore, GCC Patches; +Cc: Cary Coutant
On 01/19/2016 11:31 PM, Sandra Loosemore wrote:
> -@option{-gdwarf-2} does not accept a concatenated debug level, because
> -GCC used to support an option @option{-gdwarf} that meant to generate
> -debug information in version 1 of the DWARF format (which is very
> -different from version 2), and it would have been too confusing. That
> -debug format is long obsolete, but the option cannot be changed now.
I think we should retain some mention of DWARF 1 here, perhaps as an
explanation of why {version} starts at 2.
> Ron Guilmette implemented the @command{protoize} and @command{unprotoize}
> -tools, the support for Dwarf symbolic debugging information, and much of
> +tools, the support for DWARF symbolic debugging information, and much of
> the support for System V Release 4. He has also worked heavily on the
Let's clarify that rfg's implementation was of DWARF version 1.
Jason
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [doc, dwarf] Update bit-rotten DWARF option documentation
2016-01-20 13:52 ` Jason Merrill
@ 2016-01-21 1:01 ` Sandra Loosemore
0 siblings, 0 replies; 3+ messages in thread
From: Sandra Loosemore @ 2016-01-21 1:01 UTC (permalink / raw)
To: Jason Merrill, GCC Patches; +Cc: Cary Coutant
[-- Attachment #1: Type: text/plain, Size: 1082 bytes --]
On 01/20/2016 06:52 AM, Jason Merrill wrote:
> On 01/19/2016 11:31 PM, Sandra Loosemore wrote:
>> -@option{-gdwarf-2} does not accept a concatenated debug level, because
>> -GCC used to support an option @option{-gdwarf} that meant to generate
>> -debug information in version 1 of the DWARF format (which is very
>> -different from version 2), and it would have been too confusing. That
>> -debug format is long obsolete, but the option cannot be changed now.
>
> I think we should retain some mention of DWARF 1 here, perhaps as an
> explanation of why {version} starts at 2.
>
>> Ron Guilmette implemented the @command{protoize} and
>> @command{unprotoize}
>> -tools, the support for Dwarf symbolic debugging information, and much of
>> +tools, the support for DWARF symbolic debugging information, and much of
>> the support for System V Release 4. He has also worked heavily on the
>
> Let's clarify that rfg's implementation was of DWARF version 1.
Thanks for the sanity check. I've committed the attached version of the
patch, which addresses your comments.
-Sandra
[-- Attachment #2: dwarf.log --]
[-- Type: text/x-log, Size: 437 bytes --]
2016-01-20 Sandra Loosemore <sandra@codesourcery.com>
gcc/
* common.opt (feliminate-dwarf2-dups): Replace references to
"DWARF 2" with just "DWARF".
* config/ia64/ia64.opt (mdwarf2-asm): Likewise.
* doc/extend.texi: Likewise.
* doc/cpp.texi: Likewise.
* doc/invoke.texi: Likewise.
(Option Summary): Add -gdwarf to list of Debugging Options.
(Debugging Options): Document -gdwarf.
* doc/contrib.texi: Spell "DWARF" like that.
[-- Attachment #3: dwarf.patch --]
[-- Type: text/x-patch, Size: 10529 bytes --]
Index: gcc/common.opt
===================================================================
--- gcc/common.opt (revision 232582)
+++ gcc/common.opt (working copy)
@@ -1234,7 +1234,7 @@ Perform early inlining.
feliminate-dwarf2-dups
Common Report Var(flag_eliminate_dwarf2_dups)
-Perform DWARF2 duplicate elimination.
+Perform DWARF duplicate elimination.
fipa-sra
Common Report Var(flag_ipa_sra) Init(0) Optimization
Index: gcc/config/ia64/ia64.opt
===================================================================
--- gcc/config/ia64/ia64.opt (revision 232582)
+++ gcc/config/ia64/ia64.opt (working copy)
@@ -103,7 +103,7 @@ Do not inline square root.
mdwarf2-asm
Target Report Mask(DWARF2_ASM)
-Enable Dwarf 2 line debug info via GNU as.
+Enable DWARF line debug info via GNU as.
mearly-stop-bits
Target Report Mask(EARLY_STOP_BITS)
Index: gcc/doc/extend.texi
===================================================================
--- gcc/doc/extend.texi (revision 232582)
+++ gcc/doc/extend.texi (working copy)
@@ -916,8 +916,8 @@ provided as built-in functions by GCC@.
GCC can allocate complex automatic variables in a noncontiguous
fashion; it's even possible for the real part to be in a register while
-the imaginary part is on the stack (or vice versa). Only the DWARF 2
-debug info format can represent this, so use of DWARF 2 is recommended.
+the imaginary part is on the stack (or vice versa). Only the DWARF
+debug info format can represent this, so use of DWARF is recommended.
If you are using the stabs debug info format, GCC describes a noncontiguous
complex variable as if it were two separate variables of noncomplex type.
If the variable's actual name is @code{foo}, the two fictitious
@@ -1075,7 +1075,7 @@ the technical report.
@end itemize
Types @code{_Decimal32}, @code{_Decimal64}, and @code{_Decimal128}
-are supported by the DWARF 2 debug information format.
+are supported by the DWARF debug information format.
@node Hex Floats
@section Hex Floats
@@ -1249,7 +1249,7 @@ is incomplete:
Pragmas to control overflow and rounding behaviors are not implemented.
@end itemize
-Fixed-point types are supported by the DWARF 2 debug information format.
+Fixed-point types are supported by the DWARF debug information format.
@node Named Address Spaces
@section Named Address Spaces
Index: gcc/doc/invoke.texi
===================================================================
--- gcc/doc/invoke.texi (revision 232583)
+++ gcc/doc/invoke.texi (working copy)
@@ -316,7 +316,7 @@ Objective-C and Objective-C++ Dialects}.
@item Debugging Options
@xref{Debugging Options,,Options for Debugging Your Program}.
-@gccoptlist{-g -g@var{level} -gcoff -gdwarf-@var{version} @gol
+@gccoptlist{-g -g@var{level} -gcoff -gdwarf -gdwarf-@var{version} @gol
-ggdb -grecord-gcc-switches -gno-record-gcc-switches @gol
-gstabs -gstabs+ -gstrict-dwarf -gno-strict-dwarf @gol
-gvms -gxcoff -gxcoff+ -gz@r{[}=@var{type}@r{]} @gol
@@ -5727,7 +5727,7 @@ information useful for debugging do not
@item -g
@opindex g
Produce debugging information in the operating system's native format
-(stabs, COFF, XCOFF, or DWARF 2)@. GDB can work with this debugging
+(stabs, COFF, XCOFF, or DWARF)@. GDB can work with this debugging
information.
On most systems that use stabs format, @option{-g} enables use of extra
@@ -5741,12 +5741,13 @@ to generate the extra information, use @
@item -ggdb
@opindex ggdb
Produce debugging information for use by GDB@. This means to use the
-most expressive format available (DWARF 2, stabs, or the native format
+most expressive format available (DWARF, stabs, or the native format
if neither of those are supported), including GDB extensions if at all
possible.
-@item -gdwarf-@var{version}
-@opindex gdwarf-@var{version}
+@item -gdwarf
+@itemx -gdwarf-@var{version}
+@opindex gdwarf
Produce debugging information in DWARF format (if that is supported).
The value of @var{version} may be either 2, 3, 4 or 5; the default version
for most targets is 4. DWARF Version 5 is only experimental.
@@ -5757,6 +5758,12 @@ use some non-conflicting DWARF 3 extensi
Version 4 may require GDB 7.0 and @option{-fvar-tracking-assignments}
for maximum benefit.
+GCC no longer supports DWARF Version 1, which is substantially
+different than Version 2 and later. For historical reasons, some
+other DWARF-related options (including @option{-feliminate-dwarf2-dups}
+and @option{-fno-dwarf2-cfi-asm}) retain a reference to DWARF Version 2
+in their names, but apply to all currently-supported versions of DWARF.
+
@item -gstabs
@opindex gstabs
Produce debugging information in stabs format (if that is supported),
@@ -5817,11 +5824,8 @@ Level 3 includes extra information, such
present in the program. Some debuggers support macro expansion when
you use @option{-g3}.
-@option{-gdwarf-2} does not accept a concatenated debug level, because
-GCC used to support an option @option{-gdwarf} that meant to generate
-debug information in version 1 of the DWARF format (which is very
-different from version 2), and it would have been too confusing. That
-debug format is long obsolete, but the option cannot be changed now.
+@option{-gdwarf} does not accept a concatenated debug level, to avoid
+confusion with @option{-gdwarf-@var{level}}.
Instead use an additional @option{-g@var{level}} option to change the
debug level for DWARF.
@@ -5943,9 +5947,9 @@ when producing object files.
@item -feliminate-dwarf2-dups
@opindex feliminate-dwarf2-dups
-Compress DWARF 2 debugging information by eliminating duplicated
+Compress DWARF debugging information by eliminating duplicated
information about each symbol. This option only makes sense when
-generating DWARF 2 debugging information with @option{-gdwarf-2}.
+generating DWARF debugging information.
@item -femit-struct-debug-baseonly
@opindex femit-struct-debug-baseonly
@@ -5958,7 +5962,7 @@ but at significant potential loss in typ
See @option{-femit-struct-debug-reduced} for a less aggressive option.
See @option{-femit-struct-debug-detailed} for more detailed control.
-This option works only with DWARF 2.
+This option works only with DWARF debug output.
@item -femit-struct-debug-reduced
@opindex femit-struct-debug-reduced
@@ -5972,7 +5976,7 @@ with some potential loss in type informa
See @option{-femit-struct-debug-baseonly} for a more aggressive option.
See @option{-femit-struct-debug-detailed} for more detailed control.
-This option works only with DWARF 2.
+This option works only with DWARF debug output.
@item -femit-struct-debug-detailed@r{[}=@var{spec-list}@r{]}
@opindex femit-struct-debug-detailed
@@ -6020,18 +6024,18 @@ You may need to experiment to determine
The default is @option{-femit-struct-debug-detailed=all}.
-This option works only with DWARF 2.
+This option works only with DWARF debug output.
@item -fno-dwarf2-cfi-asm
@opindex fdwarf2-cfi-asm
@opindex fno-dwarf2-cfi-asm
-Emit DWARF 2 unwind info as compiler generated @code{.eh_frame} section
+Emit DWARF unwind info as compiler generated @code{.eh_frame} section
instead of using GAS @code{.cfi_*} directives.
@item -fno-eliminate-unused-debug-types
@opindex feliminate-unused-debug-types
@opindex fno-eliminate-unused-debug-types
-Normally, when producing DWARF 2 output, GCC avoids producing debug symbol
+Normally, when producing DWARF output, GCC avoids producing debug symbol
output for types that are nowhere used in the source file being compiled.
Sometimes it is useful to have GCC emit debugging
information for all types declared in a compilation
@@ -11017,7 +11021,7 @@ that needs this handling enables it on y
@item -fasynchronous-unwind-tables
@opindex fasynchronous-unwind-tables
-Generate unwind table in DWARF 2 format, if supported by target machine. The
+Generate unwind table in DWARF format, if supported by target machine. The
table is exact at each instruction boundary, so it can be used for stack
unwinding from asynchronous events (such as debugger or garbage collector).
@@ -16427,7 +16431,7 @@ instructions. The default is to use the
@itemx -mdwarf2-asm
@opindex mno-dwarf2-asm
@opindex mdwarf2-asm
-Don't (or do) generate assembler code for the DWARF 2 line number debugging
+Don't (or do) generate assembler code for the DWARF line number debugging
info. This may be useful when not using the GNU assembler.
@item -mearly-stop-bits
@@ -21020,7 +21024,7 @@ type. This is the default.
Store (do not store) the address of the caller's frame as backchain pointer
into the callee's stack frame.
A backchain may be needed to allow debugging using tools that do not understand
-DWARF 2 call frame information.
+DWARF call frame information.
When @option{-mno-packed-stack} is in effect, the backchain pointer is stored
at the bottom of the stack frame; when @option{-mpacked-stack} is in effect,
the backchain is placed into the topmost word of the 96/160 byte register
Index: gcc/doc/contrib.texi
===================================================================
--- gcc/doc/contrib.texi (revision 232582)
+++ gcc/doc/contrib.texi (working copy)
@@ -57,7 +57,7 @@ Wolfgang Bangerth for processing tons of
Jon Beniston for his Microsoft Windows port of Java and port to Lattice Mico32.
@item
-Daniel Berlin for better DWARF2 support, faster/better optimizations,
+Daniel Berlin for better DWARF 2 support, faster/better optimizations,
improved alias analysis, plus migrating GCC to Bugzilla.
@item
@@ -350,7 +350,7 @@ and for release management.
@item
Ron Guilmette implemented the @command{protoize} and @command{unprotoize}
-tools, the support for Dwarf symbolic debugging information, and much of
+tools, the support for DWARF 1 symbolic debugging information, and much of
the support for System V Release 4. He has also worked heavily on the
Intel 386 and 860 support.
Index: gcc/doc/cpp.texi
===================================================================
--- gcc/doc/cpp.texi (revision 232582)
+++ gcc/doc/cpp.texi (working copy)
@@ -2382,7 +2382,7 @@ These macros are defined when the target
and swap operations on operands 1, 2, 4, 8 or 16 bytes in length, respectively.
@item __GCC_HAVE_DWARF2_CFI_ASM
-This macro is defined when the compiler is emitting Dwarf2 CFI directives
+This macro is defined when the compiler is emitting DWARF CFI directives
to the assembler. When this is defined, it is possible to emit those same
directives in inline assembly.
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2016-01-21 1:01 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2016-01-20 4:31 [doc, dwarf] Update bit-rotten DWARF option documentation Sandra Loosemore
2016-01-20 13:52 ` Jason Merrill
2016-01-21 1:01 ` Sandra Loosemore
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).