From: 钟居哲 <juzhe.zhong@rivai.ai>
To: 钟居哲 <juzhe.zhong@rivai.ai>, gcc-patches <gcc-patches@gcc.gnu.org>
Cc: richard.sandiford <richard.sandiford@arm.com>,
rguenther <rguenther@suse.de>,
"Jeff Law" <jeffreyalaw@gmail.com>
Subject: Re: [PATCH] VECT: Add WHILE_LEN pattern for decrement IV support for auto-vectorization
Date: Thu, 20 Apr 2023 05:53:42 +0800 [thread overview]
Message-ID: <5B48D6D344CE6158+202304200553419571591@rivai.ai> (raw)
In-Reply-To: <20230407014741.139387-1-juzhe.zhong@rivai.ai>
[-- Attachment #1: Type: text/plain, Size: 19881 bytes --]
Hi, Richards.
Since GCC 14 is open and this patch has been boostraped && tested on X86.
Is this patch supporting variable IV OK for the trunk ?
Thanks
juzhe.zhong@rivai.ai
From: juzhe.zhong
Date: 2023-04-07 09:47
To: gcc-patches
CC: richard.sandiford; rguenther; jeffreyalaw; Juzhe-Zhong
Subject: [PATCH] VECT: Add WHILE_LEN pattern for decrement IV support for auto-vectorization
From: Juzhe-Zhong <juzhe.zhong@rivai.ai>
This patch is to add WHILE_LEN pattern.
It's inspired by RVV ISA simple "vvaddint32.s" example:
https://github.com/riscv/riscv-v-spec/blob/master/example/vvaddint32.s
More details are in "vect_set_loop_controls_by_while_len" implementation
and comments.
Consider such following case:
#define N 16
int src[N];
int dest[N];
void
foo (int n)
{
for (int i = 0; i < n; i++)
dest[i] = src[i];
}
-march=rv64gcv -O3 --param riscv-autovec-preference=scalable -fno-vect-cost-model -fno-tree-loop-distribute-patterns:
foo:
ble a0,zero,.L1
lui a4,%hi(.LANCHOR0)
addi a4,a4,%lo(.LANCHOR0)
addi a3,a4,64
csrr a2,vlenb
.L3:
vsetvli a5,a0,e32,m1,ta,ma
vle32.v v1,0(a4)
sub a0,a0,a5
vse32.v v1,0(a3)
add a4,a4,a2
add a3,a3,a2
bne a0,zero,.L3
.L1:
ret
gcc/ChangeLog:
* doc/md.texi: Add WHILE_LEN support.
* internal-fn.cc (while_len_direct): Ditto.
(expand_while_len_optab_fn): Ditto.
(direct_while_len_optab_supported_p): Ditto.
* internal-fn.def (WHILE_LEN): Ditto.
* optabs.def (OPTAB_D): Ditto.
* tree-ssa-loop-manip.cc (create_iv): Ditto.
* tree-ssa-loop-manip.h (create_iv): Ditto.
* tree-vect-loop-manip.cc (vect_set_loop_controls_by_while_len): Ditto.
(vect_set_loop_condition_partial_vectors): Ditto.
* tree-vect-loop.cc (vect_get_loop_len): Ditto.
* tree-vect-stmts.cc (vectorizable_store): Ditto.
(vectorizable_load): Ditto.
* tree-vectorizer.h (vect_get_loop_len): Ditto.
---
gcc/doc/md.texi | 14 +++
gcc/internal-fn.cc | 29 ++++++
gcc/internal-fn.def | 1 +
gcc/optabs.def | 1 +
gcc/tree-ssa-loop-manip.cc | 4 +-
gcc/tree-ssa-loop-manip.h | 2 +-
gcc/tree-vect-loop-manip.cc | 186 ++++++++++++++++++++++++++++++++++--
gcc/tree-vect-loop.cc | 35 +++++--
gcc/tree-vect-stmts.cc | 9 +-
gcc/tree-vectorizer.h | 4 +-
10 files changed, 264 insertions(+), 21 deletions(-)
diff --git a/gcc/doc/md.texi b/gcc/doc/md.texi
index 8e3113599fd..72178ab014c 100644
--- a/gcc/doc/md.texi
+++ b/gcc/doc/md.texi
@@ -4965,6 +4965,20 @@ for (i = 1; i < operand3; i++)
operand0[i] = operand0[i - 1] && (operand1 + i < operand2);
@end smallexample
+@cindex @code{while_len@var{m}@var{n}} instruction pattern
+@item @code{while_len@var{m}@var{n}}
+Set operand 0 to the number of active elements in vector will be updated value.
+operand 1 is the total elements need to be updated value.
+operand 2 is the vectorization factor.
+The operation is equivalent to:
+
+@smallexample
+operand0 = MIN (operand1, operand2);
+operand2 can be const_poly_int or poly_int related to vector mode size.
+Some target like RISC-V has a standalone instruction to get MIN (n, MODE SIZE) so
+that we can reduce a use of general purpose register.
+@end smallexample
+
@cindex @code{check_raw_ptrs@var{m}} instruction pattern
@item @samp{check_raw_ptrs@var{m}}
Check whether, given two pointers @var{a} and @var{b} and a length @var{len},
diff --git a/gcc/internal-fn.cc b/gcc/internal-fn.cc
index 6e81dc05e0e..5f44def90d3 100644
--- a/gcc/internal-fn.cc
+++ b/gcc/internal-fn.cc
@@ -127,6 +127,7 @@ init_internal_fns ()
#define cond_binary_direct { 1, 1, true }
#define cond_ternary_direct { 1, 1, true }
#define while_direct { 0, 2, false }
+#define while_len_direct { 0, 0, false }
#define fold_extract_direct { 2, 2, false }
#define fold_left_direct { 1, 1, false }
#define mask_fold_left_direct { 1, 1, false }
@@ -3702,6 +3703,33 @@ expand_while_optab_fn (internal_fn, gcall *stmt, convert_optab optab)
emit_move_insn (lhs_rtx, ops[0].value);
}
+/* Expand WHILE_LEN call STMT using optab OPTAB. */
+static void
+expand_while_len_optab_fn (internal_fn, gcall *stmt, convert_optab optab)
+{
+ expand_operand ops[3];
+ tree rhs_type[2];
+
+ tree lhs = gimple_call_lhs (stmt);
+ tree lhs_type = TREE_TYPE (lhs);
+ rtx lhs_rtx = expand_expr (lhs, NULL_RTX, VOIDmode, EXPAND_WRITE);
+ create_output_operand (&ops[0], lhs_rtx, TYPE_MODE (lhs_type));
+
+ for (unsigned int i = 0; i < gimple_call_num_args (stmt); ++i)
+ {
+ tree rhs = gimple_call_arg (stmt, i);
+ rhs_type[i] = TREE_TYPE (rhs);
+ rtx rhs_rtx = expand_normal (rhs);
+ create_input_operand (&ops[i + 1], rhs_rtx, TYPE_MODE (rhs_type[i]));
+ }
+
+ insn_code icode = direct_optab_handler (optab, TYPE_MODE (rhs_type[0]));
+
+ expand_insn (icode, 3, ops);
+ if (!rtx_equal_p (lhs_rtx, ops[0].value))
+ emit_move_insn (lhs_rtx, ops[0].value);
+}
+
/* Expand a call to a convert-like optab using the operands in STMT.
FN has a single output operand and NARGS input operands. */
@@ -3843,6 +3871,7 @@ multi_vector_optab_supported_p (convert_optab optab, tree_pair types,
#define direct_scatter_store_optab_supported_p convert_optab_supported_p
#define direct_len_store_optab_supported_p direct_optab_supported_p
#define direct_while_optab_supported_p convert_optab_supported_p
+#define direct_while_len_optab_supported_p direct_optab_supported_p
#define direct_fold_extract_optab_supported_p direct_optab_supported_p
#define direct_fold_left_optab_supported_p direct_optab_supported_p
#define direct_mask_fold_left_optab_supported_p direct_optab_supported_p
diff --git a/gcc/internal-fn.def b/gcc/internal-fn.def
index 7fe742c2ae7..3a933abff5d 100644
--- a/gcc/internal-fn.def
+++ b/gcc/internal-fn.def
@@ -153,6 +153,7 @@ DEF_INTERNAL_OPTAB_FN (VEC_SET, 0, vec_set, vec_set)
DEF_INTERNAL_OPTAB_FN (LEN_STORE, 0, len_store, len_store)
DEF_INTERNAL_OPTAB_FN (WHILE_ULT, ECF_CONST | ECF_NOTHROW, while_ult, while)
+DEF_INTERNAL_OPTAB_FN (WHILE_LEN, ECF_CONST | ECF_NOTHROW, while_len, while_len)
DEF_INTERNAL_OPTAB_FN (CHECK_RAW_PTRS, ECF_CONST | ECF_NOTHROW,
check_raw_ptrs, check_ptrs)
DEF_INTERNAL_OPTAB_FN (CHECK_WAR_PTRS, ECF_CONST | ECF_NOTHROW,
diff --git a/gcc/optabs.def b/gcc/optabs.def
index 695f5911b30..f5938bd2c24 100644
--- a/gcc/optabs.def
+++ b/gcc/optabs.def
@@ -476,3 +476,4 @@ OPTAB_DC (vec_series_optab, "vec_series$a", VEC_SERIES)
OPTAB_D (vec_shl_insert_optab, "vec_shl_insert_$a")
OPTAB_D (len_load_optab, "len_load_$a")
OPTAB_D (len_store_optab, "len_store_$a")
+OPTAB_D (while_len_optab, "while_len$a")
diff --git a/gcc/tree-ssa-loop-manip.cc b/gcc/tree-ssa-loop-manip.cc
index 09acc1c94cc..cdbf280e249 100644
--- a/gcc/tree-ssa-loop-manip.cc
+++ b/gcc/tree-ssa-loop-manip.cc
@@ -59,14 +59,14 @@ static bitmap_obstack loop_renamer_obstack;
void
create_iv (tree base, tree step, tree var, class loop *loop,
gimple_stmt_iterator *incr_pos, bool after,
- tree *var_before, tree *var_after)
+ tree *var_before, tree *var_after, enum tree_code code)
{
gassign *stmt;
gphi *phi;
tree initial, step1;
gimple_seq stmts;
tree vb, va;
- enum tree_code incr_op = PLUS_EXPR;
+ enum tree_code incr_op = code;
edge pe = loop_preheader_edge (loop);
if (var != NULL_TREE)
diff --git a/gcc/tree-ssa-loop-manip.h b/gcc/tree-ssa-loop-manip.h
index d49273a3987..da755320a3a 100644
--- a/gcc/tree-ssa-loop-manip.h
+++ b/gcc/tree-ssa-loop-manip.h
@@ -23,7 +23,7 @@ along with GCC; see the file COPYING3. If not see
typedef void (*transform_callback)(class loop *, void *);
extern void create_iv (tree, tree, tree, class loop *, gimple_stmt_iterator *,
- bool, tree *, tree *);
+ bool, tree *, tree *, enum tree_code = PLUS_EXPR);
extern void rewrite_into_loop_closed_ssa (bitmap, unsigned);
extern void verify_loop_closed_ssa (bool, class loop * = NULL);
diff --git a/gcc/tree-vect-loop-manip.cc b/gcc/tree-vect-loop-manip.cc
index f60fa50e8f4..f3cd6c51d2e 100644
--- a/gcc/tree-vect-loop-manip.cc
+++ b/gcc/tree-vect-loop-manip.cc
@@ -682,6 +682,173 @@ vect_set_loop_controls_directly (class loop *loop, loop_vec_info loop_vinfo,
return next_ctrl;
}
+/* Helper for vect_set_loop_condition_partial_vectors. Generate definitions
+ for all the rgroup controls in RGC and return a control that is nonzero
+ when the loop needs to iterate. Add any new preheader statements to
+ PREHEADER_SEQ. Use LOOP_COND_GSI to insert code before the exit gcond.
+
+ RGC belongs to loop LOOP. The loop originally iterated NITERS
+ times and has been vectorized according to LOOP_VINFO.
+
+ Unlike vect_set_loop_controls_directly which is iterating from 0-based IV
+ to TEST_LIMIT - bias.
+
+ In vect_set_loop_controls_by_while_len, we are iterating from start at
+ IV = TEST_LIMIT - bias and keep subtract IV by the length calculated by
+ IFN_WHILE_LEN pattern.
+
+ Note: the cost of the code generated by this function is modeled
+ by vect_estimate_min_profitable_iters, so changes here may need
+ corresponding changes there.
+
+ 1. Single rgroup, the Gimple IR should be:
+
+ <bb 3>
+ _19 = (unsigned long) n_5(D);
+ ...
+
+ <bb 4>:
+ ...
+ # ivtmp_20 = PHI <ivtmp_21(4), _19(3)>
+ ...
+ _22 = .WHILE_LEN (ivtmp_20, vf);
+ ...
+ vector statement (use _22);
+ ...
+ ivtmp_21 = ivtmp_20 - _22;
+ ...
+ if (ivtmp_21 != 0)
+ goto <bb 4>; [75.00%]
+ else
+ goto <bb 5>; [25.00%]
+
+ <bb 5>
+ return;
+
+ Note: IFN_WHILE_LEN will guarantee "ivtmp_21 = ivtmp_20 - _22" never
+ underflow 0.
+
+ 2. Multiple rgroup, the Gimple IR should be:
+
+ <bb 3>
+ _70 = (unsigned long) bnd.7_52;
+ _71 = _70 * 2;
+ _72 = MAX_EXPR <_71, 4>;
+ _73 = _72 + 18446744073709551612;
+ ...
+
+ <bb 4>:
+ ...
+ # ivtmp_74 = PHI <ivtmp_75(6), _73(12)>
+ # ivtmp_77 = PHI <ivtmp_78(6), _71(12)>
+ _76 = .WHILE_LEN (ivtmp_74, vf * nitems_per_ctrl);
+ _79 = .WHILE_LEN (ivtmp_77, vf * nitems_per_ctrl);
+ ...
+ vector statement (use _79);
+ ...
+ vector statement (use _76);
+ ...
+ _65 = _79 / 2;
+ vector statement (use _65);
+ ...
+ _68 = _76 / 2;
+ vector statement (use _68);
+ ...
+ ivtmp_78 = ivtmp_77 - _79;
+ ivtmp_75 = ivtmp_74 - _76;
+ ...
+ if (ivtmp_78 != 0)
+ goto <bb 4>; [75.00%]
+ else
+ goto <bb 5>; [25.00%]
+
+ <bb 5>
+ return;
+
+*/
+
+static tree
+vect_set_loop_controls_by_while_len (class loop *loop, loop_vec_info loop_vinfo,
+ gimple_seq *preheader_seq,
+ gimple_seq *header_seq,
+ rgroup_controls *rgc, tree niters)
+{
+ tree compare_type = LOOP_VINFO_RGROUP_COMPARE_TYPE (loop_vinfo);
+ tree iv_type = LOOP_VINFO_RGROUP_IV_TYPE (loop_vinfo);
+ /* We are not allowing masked approach in WHILE_LEN. */
+ gcc_assert (!LOOP_VINFO_FULLY_MASKED_P (loop_vinfo));
+
+ tree ctrl_type = rgc->type;
+ unsigned int nitems_per_iter = rgc->max_nscalars_per_iter * rgc->factor;
+ poly_uint64 nitems_per_ctrl = TYPE_VECTOR_SUBPARTS (ctrl_type) * rgc->factor;
+ poly_uint64 vf = LOOP_VINFO_VECT_FACTOR (loop_vinfo);
+
+ /* Calculate the maximum number of item values that the rgroup
+ handles in total, the number that it handles for each iteration
+ of the vector loop. */
+ tree nitems_total = niters;
+ if (nitems_per_iter != 1)
+ {
+ /* We checked before setting LOOP_VINFO_USING_PARTIAL_VECTORS_P that
+ these multiplications don't overflow. */
+ tree compare_factor = build_int_cst (compare_type, nitems_per_iter);
+ nitems_total = gimple_build (preheader_seq, MULT_EXPR, compare_type,
+ nitems_total, compare_factor);
+ }
+
+ /* Convert the comparison value to the IV type (either a no-op or
+ a promotion). */
+ nitems_total = gimple_convert (preheader_seq, iv_type, nitems_total);
+
+ /* Create an induction variable that counts the number of items
+ processed. */
+ tree index_before_incr, index_after_incr;
+ gimple_stmt_iterator incr_gsi;
+ bool insert_after;
+ standard_iv_increment_position (loop, &incr_gsi, &insert_after);
+
+ /* Test the decremented IV, which will never underflow 0 since we have
+ IFN_WHILE_LEN to gurantee that. */
+ tree test_limit = nitems_total;
+
+ /* Provide a definition of each control in the group. */
+ tree ctrl;
+ unsigned int i;
+ FOR_EACH_VEC_ELT_REVERSE (rgc->controls, i, ctrl)
+ {
+ /* Previous controls will cover BIAS items. This control covers the
+ next batch. */
+ poly_uint64 bias = nitems_per_ctrl * i;
+ tree bias_tree = build_int_cst (iv_type, bias);
+
+ /* Rather than have a new IV that starts at TEST_LIMIT and goes down to
+ BIAS, prefer to use the same TEST_LIMIT - BIAS based IV for each
+ control and adjust the bound down by BIAS. */
+ tree this_test_limit = test_limit;
+ if (i != 0)
+ {
+ this_test_limit = gimple_build (preheader_seq, MAX_EXPR, iv_type,
+ this_test_limit, bias_tree);
+ this_test_limit = gimple_build (preheader_seq, MINUS_EXPR, iv_type,
+ this_test_limit, bias_tree);
+ }
+
+ /* Create decrement IV. */
+ create_iv (this_test_limit, ctrl, NULL_TREE, loop, &incr_gsi,
+ insert_after, &index_before_incr, &index_after_incr,
+ MINUS_EXPR);
+
+ poly_uint64 final_vf = vf * nitems_per_iter;
+ tree vf_step = build_int_cst (iv_type, final_vf);
+ tree res_len = gimple_build (header_seq, IFN_WHILE_LEN, iv_type,
+ index_before_incr, vf_step);
+ gassign *assign = gimple_build_assign (ctrl, res_len);
+ gimple_seq_add_stmt (header_seq, assign);
+ }
+
+ return index_after_incr;
+}
+
/* Set up the iteration condition and rgroup controls for LOOP, given
that LOOP_VINFO_USING_PARTIAL_VECTORS_P is true for the vectorized
loop. LOOP_VINFO describes the vectorization of LOOP. NITERS is
@@ -703,6 +870,7 @@ vect_set_loop_condition_partial_vectors (class loop *loop,
bool use_masks_p = LOOP_VINFO_FULLY_MASKED_P (loop_vinfo);
tree compare_type = LOOP_VINFO_RGROUP_COMPARE_TYPE (loop_vinfo);
+ tree iv_type = LOOP_VINFO_RGROUP_IV_TYPE (loop_vinfo);
unsigned int compare_precision = TYPE_PRECISION (compare_type);
tree orig_niters = niters;
@@ -757,12 +925,18 @@ vect_set_loop_condition_partial_vectors (class loop *loop,
bool might_wrap_p = vect_rgroup_iv_might_wrap_p (loop_vinfo, rgc);
/* Set up all controls for this group. */
- test_ctrl = vect_set_loop_controls_directly (loop, loop_vinfo,
- &preheader_seq,
- &header_seq,
- loop_cond_gsi, rgc,
- niters, niters_skip,
- might_wrap_p);
+ if (direct_internal_fn_supported_p (IFN_WHILE_LEN, iv_type,
+ OPTIMIZE_FOR_SPEED))
+ test_ctrl
+ = vect_set_loop_controls_by_while_len (loop, loop_vinfo,
+ &preheader_seq, &header_seq,
+ rgc, niters);
+ else
+ test_ctrl
+ = vect_set_loop_controls_directly (loop, loop_vinfo, &preheader_seq,
+ &header_seq, loop_cond_gsi, rgc,
+ niters, niters_skip,
+ might_wrap_p);
}
/* Emit all accumulated statements. */
diff --git a/gcc/tree-vect-loop.cc b/gcc/tree-vect-loop.cc
index 1ba9f18d73e..5bffd9a6322 100644
--- a/gcc/tree-vect-loop.cc
+++ b/gcc/tree-vect-loop.cc
@@ -10360,12 +10360,14 @@ vect_record_loop_len (loop_vec_info loop_vinfo, vec_loop_lens *lens,
rgroup that operates on NVECTORS vectors, where 0 <= INDEX < NVECTORS. */
tree
-vect_get_loop_len (loop_vec_info loop_vinfo, vec_loop_lens *lens,
- unsigned int nvectors, unsigned int index)
+vect_get_loop_len (gimple_stmt_iterator *gsi, loop_vec_info loop_vinfo,
+ vec_loop_lens *lens, unsigned int nvectors, tree vectype,
+ unsigned int index)
{
rgroup_controls *rgl = &(*lens)[nvectors - 1];
- bool use_bias_adjusted_len =
- LOOP_VINFO_PARTIAL_LOAD_STORE_BIAS (loop_vinfo) != 0;
+ bool use_bias_adjusted_len
+ = LOOP_VINFO_PARTIAL_LOAD_STORE_BIAS (loop_vinfo) != 0;
+ tree iv_type = LOOP_VINFO_RGROUP_IV_TYPE (loop_vinfo);
/* Populate the rgroup's len array, if this is the first time we've
used it. */
@@ -10386,8 +10388,8 @@ vect_get_loop_len (loop_vec_info loop_vinfo, vec_loop_lens *lens,
if (use_bias_adjusted_len)
{
gcc_assert (i == 0);
- tree adjusted_len =
- make_temp_ssa_name (len_type, NULL, "adjusted_loop_len");
+ tree adjusted_len
+ = make_temp_ssa_name (len_type, NULL, "adjusted_loop_len");
SSA_NAME_DEF_STMT (adjusted_len) = gimple_build_nop ();
rgl->bias_adjusted_ctrl = adjusted_len;
}
@@ -10396,6 +10398,27 @@ vect_get_loop_len (loop_vec_info loop_vinfo, vec_loop_lens *lens,
if (use_bias_adjusted_len)
return rgl->bias_adjusted_ctrl;
+ else if (direct_internal_fn_supported_p (IFN_WHILE_LEN, iv_type,
+ OPTIMIZE_FOR_SPEED))
+ {
+ tree loop_len = rgl->controls[index];
+ poly_int64 nunits1 = TYPE_VECTOR_SUBPARTS (rgl->type);
+ poly_int64 nunits2 = TYPE_VECTOR_SUBPARTS (vectype);
+ if (maybe_ne (nunits1, nunits2))
+ {
+ /* A loop len for data type X can be reused for data type Y
+ if X has N times more elements than Y and if Y's elements
+ are N times bigger than X's. */
+ gcc_assert (multiple_p (nunits1, nunits2));
+ unsigned int factor = exact_div (nunits1, nunits2).to_constant ();
+ gimple_seq seq = NULL;
+ loop_len = gimple_build (&seq, RDIV_EXPR, iv_type, loop_len,
+ build_int_cst (iv_type, factor));
+ if (seq)
+ gsi_insert_seq_before (gsi, seq, GSI_SAME_STMT);
+ }
+ return loop_len;
+ }
else
return rgl->controls[index];
}
diff --git a/gcc/tree-vect-stmts.cc b/gcc/tree-vect-stmts.cc
index efa2d0daa52..708c8a1d806 100644
--- a/gcc/tree-vect-stmts.cc
+++ b/gcc/tree-vect-stmts.cc
@@ -8653,8 +8653,9 @@ vectorizable_store (vec_info *vinfo,
else if (loop_lens)
{
tree final_len
- = vect_get_loop_len (loop_vinfo, loop_lens,
- vec_num * ncopies, vec_num * j + i);
+ = vect_get_loop_len (gsi, loop_vinfo, loop_lens,
+ vec_num * ncopies, vectype,
+ vec_num * j + i);
tree ptr = build_int_cst (ref_type, align * BITS_PER_UNIT);
machine_mode vmode = TYPE_MODE (vectype);
opt_machine_mode new_ovmode
@@ -10009,8 +10010,8 @@ vectorizable_load (vec_info *vinfo,
else if (loop_lens && memory_access_type != VMAT_INVARIANT)
{
tree final_len
- = vect_get_loop_len (loop_vinfo, loop_lens,
- vec_num * ncopies,
+ = vect_get_loop_len (gsi, loop_vinfo, loop_lens,
+ vec_num * ncopies, vectype,
vec_num * j + i);
tree ptr = build_int_cst (ref_type,
align * BITS_PER_UNIT);
diff --git a/gcc/tree-vectorizer.h b/gcc/tree-vectorizer.h
index 9cf2fb23fe3..e5cf38caf4b 100644
--- a/gcc/tree-vectorizer.h
+++ b/gcc/tree-vectorizer.h
@@ -2293,8 +2293,8 @@ extern tree vect_get_loop_mask (gimple_stmt_iterator *, vec_loop_masks *,
unsigned int, tree, unsigned int);
extern void vect_record_loop_len (loop_vec_info, vec_loop_lens *, unsigned int,
tree, unsigned int);
-extern tree vect_get_loop_len (loop_vec_info, vec_loop_lens *, unsigned int,
- unsigned int);
+extern tree vect_get_loop_len (gimple_stmt_iterator *, loop_vec_info,
+ vec_loop_lens *, unsigned int, tree, unsigned int);
extern gimple_seq vect_gen_len (tree, tree, tree, tree);
extern stmt_vec_info info_for_reduction (vec_info *, stmt_vec_info);
extern bool reduction_fn_for_scalar_code (code_helper, internal_fn *);
--
2.36.3
next prev parent reply other threads:[~2023-04-19 21:53 UTC|newest]
Thread overview: 41+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-04-07 1:47 juzhe.zhong
2023-04-07 3:23 ` Li, Pan2
2023-04-11 12:12 ` juzhe.zhong
2023-04-11 12:44 ` Richard Sandiford
2023-04-12 7:00 ` Richard Biener
2023-04-12 8:00 ` juzhe.zhong
2023-04-12 8:42 ` Richard Biener
2023-04-12 9:15 ` juzhe.zhong
2023-04-12 9:29 ` Richard Biener
2023-04-12 9:42 ` Robin Dapp
2023-04-12 11:17 ` Richard Sandiford
2023-04-12 11:37 ` juzhe.zhong
2023-04-12 12:24 ` Richard Sandiford
2023-04-12 14:18 ` 钟居哲
2023-04-13 6:47 ` Richard Biener
2023-04-13 9:54 ` juzhe.zhong
2023-04-18 9:32 ` Richard Sandiford
2023-04-12 12:56 ` Kewen.Lin
2023-04-12 13:22 ` 钟居哲
2023-04-13 7:29 ` Kewen.Lin
2023-04-13 13:44 ` 钟居哲
2023-04-14 2:54 ` Kewen.Lin
2023-04-14 3:09 ` juzhe.zhong
2023-04-14 5:40 ` Kewen.Lin
2023-04-14 3:39 ` juzhe.zhong
2023-04-14 6:31 ` Kewen.Lin
2023-04-14 6:39 ` juzhe.zhong
2023-04-14 7:41 ` Kewen.Lin
2023-04-14 6:52 ` Richard Biener
2023-04-12 11:42 ` Richard Biener
[not found] ` <2023041217154958074655@rivai.ai>
2023-04-12 9:20 ` juzhe.zhong
2023-04-19 21:53 ` 钟居哲 [this message]
2023-04-20 8:52 ` Richard Sandiford
2023-04-20 8:57 ` juzhe.zhong
2023-04-20 9:11 ` Richard Sandiford
2023-04-20 9:19 ` juzhe.zhong
2023-04-20 9:22 ` Richard Sandiford
2023-04-20 9:50 ` Richard Biener
2023-04-20 9:54 ` Richard Sandiford
2023-04-20 10:38 ` juzhe.zhong
2023-04-20 12:05 ` Richard Biener
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5B48D6D344CE6158+202304200553419571591@rivai.ai \
--to=juzhe.zhong@rivai.ai \
--cc=gcc-patches@gcc.gnu.org \
--cc=jeffreyalaw@gmail.com \
--cc=rguenther@suse.de \
--cc=richard.sandiford@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).