From: Richard Sandiford <richard.sandiford@arm.com>
To: gcc-patches@gcc.gnu.org
Subject: [45/67] Make extract_left_shift take a scalar_int_mode
Date: Fri, 09 Dec 2016 13:23:00 -0000 [thread overview]
Message-ID: <8737hxi6dt.fsf@e105548-lin.cambridge.arm.com> (raw)
In-Reply-To: <87h96dp8u6.fsf@e105548-lin.cambridge.arm.com> (Richard Sandiford's message of "Fri, 09 Dec 2016 12:48:01 +0000")
This patch passes the mode of the shifted value to extract_left_shift
and updates the only caller so that the mode is a scalar_int_mode.
gcc/
2016-11-24 Richard Sandiford <richard.sandiford@arm.com>
Alan Hayward <alan.hayward@arm.com>
David Sherwood <david.sherwood@arm.com>
* combine.c (extract_left_shift): Add a mode argument and update
recursive calls.
(make_compound_operation_int): Change the type of the mode parameter
to scalar_int_mode and update the call to extract_left_shift.
diff --git a/gcc/combine.c b/gcc/combine.c
index 5262bf9..fac82d4 100644
--- a/gcc/combine.c
+++ b/gcc/combine.c
@@ -442,7 +442,6 @@ static rtx expand_compound_operation (rtx);
static const_rtx expand_field_assignment (const_rtx);
static rtx make_extraction (machine_mode, rtx, HOST_WIDE_INT,
rtx, unsigned HOST_WIDE_INT, int, int, int);
-static rtx extract_left_shift (rtx, int);
static int get_pos_from_mask (unsigned HOST_WIDE_INT,
unsigned HOST_WIDE_INT *);
static rtx canon_reg_for_combine (rtx, rtx);
@@ -7778,14 +7777,14 @@ make_extraction (machine_mode mode, rtx inner, HOST_WIDE_INT pos,
return new_rtx;
}
\f
-/* See if X contains an ASHIFT of COUNT or more bits that can be commuted
- with any other operations in X. Return X without that shift if so. */
+/* See if X (of mode MODE) contains an ASHIFT of COUNT or more bits that
+ can be commuted with any other operations in X. Return X without
+ that shift if so. */
static rtx
-extract_left_shift (rtx x, int count)
+extract_left_shift (scalar_int_mode mode, rtx x, int count)
{
enum rtx_code code = GET_CODE (x);
- machine_mode mode = GET_MODE (x);
rtx tem;
switch (code)
@@ -7801,7 +7800,7 @@ extract_left_shift (rtx x, int count)
break;
case NEG: case NOT:
- if ((tem = extract_left_shift (XEXP (x, 0), count)) != 0)
+ if ((tem = extract_left_shift (mode, XEXP (x, 0), count)) != 0)
return simplify_gen_unary (code, mode, tem, mode);
break;
@@ -7812,7 +7811,7 @@ extract_left_shift (rtx x, int count)
if (CONST_INT_P (XEXP (x, 1))
&& (UINTVAL (XEXP (x, 1))
& (((HOST_WIDE_INT_1U << count)) - 1)) == 0
- && (tem = extract_left_shift (XEXP (x, 0), count)) != 0)
+ && (tem = extract_left_shift (mode, XEXP (x, 0), count)) != 0)
{
HOST_WIDE_INT val = INTVAL (XEXP (x, 1)) >> count;
return simplify_gen_binary (code, mode, tem,
@@ -7840,7 +7839,7 @@ extract_left_shift (rtx x, int count)
- Return a new rtx, which the caller returns directly. */
static rtx
-make_compound_operation_int (machine_mode mode, rtx *x_ptr,
+make_compound_operation_int (scalar_int_mode mode, rtx *x_ptr,
enum rtx_code in_code,
enum rtx_code *next_code_ptr)
{
@@ -8147,7 +8146,7 @@ make_compound_operation_int (machine_mode mode, rtx *x_ptr,
&& INTVAL (rhs) >= 0
&& INTVAL (rhs) < HOST_BITS_PER_WIDE_INT
&& INTVAL (rhs) < mode_width
- && (new_rtx = extract_left_shift (lhs, INTVAL (rhs))) != 0)
+ && (new_rtx = extract_left_shift (mode, lhs, INTVAL (rhs))) != 0)
new_rtx = make_extraction (mode, make_compound_operation (new_rtx, next_code),
0, NULL_RTX, mode_width - INTVAL (rhs),
code == LSHIFTRT, 0, in_code == COMPARE);
next prev parent reply other threads:[~2016-12-09 13:23 UTC|newest]
Thread overview: 79+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-12-09 12:48 [0/67] Add wrapper classes for machine_modes Richard Sandiford
2016-12-09 12:50 ` [1/67] Add an E_ prefix to mode names and update case statements Richard Sandiford
2016-12-09 12:52 ` [2/67] Make machine_mode a class Richard Sandiford
2016-12-15 22:34 ` Trevor Saunders
2016-12-09 12:53 ` [3/67] Add GDB pretty printer for machine mode classes Richard Sandiford
2016-12-09 12:54 ` [4/67] Add FOR_EACH iterators for modes Richard Sandiford
2016-12-09 12:55 ` [6/67] Make GET_MODE_WIDER return an opt_mode Richard Sandiford
2016-12-09 12:55 ` [5/67] Small tweak to array_value_type Richard Sandiford
2016-12-09 12:57 ` [7/67] Add scalar_float_mode Richard Sandiford
2016-12-09 14:19 ` David Malcolm
2016-12-09 14:30 ` Richard Sandiford
2016-12-09 12:57 ` [8/67] Simplify gen_trunc/extend_conv_libfunc Richard Sandiford
2016-12-09 12:58 ` [9/67] Add SCALAR_FLOAT_TYPE_MODE Richard Sandiford
2016-12-09 12:59 ` [10/67] Make assemble_real take a scalar_float_mode Richard Sandiford
2016-12-09 13:00 ` [0/67] Add wrapper classes for machine_modes Richard Biener
2016-12-09 13:54 ` Richard Sandiford
2016-12-09 13:00 ` [12/67] Use opt_scalar_float_mode when iterating over float modes Richard Sandiford
2016-12-09 13:00 ` [11/67] Add a float_mode_for_size helper function Richard Sandiford
2016-12-09 13:01 ` [13/67] Make floatn_mode return an opt_scalar_float_mode Richard Sandiford
2016-12-09 13:02 ` [14/67] Make libgcc_floating_mode_supported_p take a scalar_float_mode Richard Sandiford
2016-12-09 13:03 ` [16/67] Add scalar_int_mode_pod Richard Sandiford
2016-12-09 13:03 ` [15/67] Add scalar_int_mode Richard Sandiford
2016-12-09 13:04 ` [17/67] Add an int_mode_for_size helper function Richard Sandiford
2016-12-09 13:05 ` [19/67] Add a smallest_int_mode_for_size " Richard Sandiford
2016-12-09 13:05 ` [18/67] Make int_mode_for_mode return an opt_scalar_int_mode Richard Sandiford
2016-12-09 13:06 ` [20/67] Replace MODE_INT checks with is_int_mode Richard Sandiford
2016-12-09 13:07 ` [21/67] Replace SCALAR_INT_MODE_P checks with is_a <scalar_int_mode> Richard Sandiford
2016-12-09 13:07 ` [22/67] Replace !VECTOR_MODE_P " Richard Sandiford
2016-12-09 13:08 ` [23/67] Replace != VOIDmode checks " Richard Sandiford
2016-12-09 13:08 ` [24/67] Replace a != BLKmode check " Richard Sandiford
2016-12-09 13:22 ` Richard Biener
2016-12-09 14:42 ` Richard Sandiford
2016-12-09 13:09 ` [25/67] Use is_a <scalar_int_mode> for bitmask optimisations Richard Sandiford
2016-12-09 13:10 ` [27/67] Use is_a <scalar_int_mode> before LOAD_EXTEND_OP Richard Sandiford
2016-12-09 13:10 ` [26/67] Use is_a <scalar_int_mode> in subreg/extract simplifications Richard Sandiford
2016-12-09 13:11 ` [28/67] Use is_a <scalar_int_mode> for miscellaneous types of test Richard Sandiford
2016-12-09 13:12 ` [30/67] Use scalar_int_mode for doubleword splits Richard Sandiford
2016-12-09 13:12 ` [29/67] Make some *_loc_descriptor helpers take scalar_int_mode Richard Sandiford
2016-12-09 13:13 ` [31/67] Use scalar_int_mode for move2add Richard Sandiford
2016-12-09 13:14 ` [33/67] Add a NARROWEST_INT_MODE macro Richard Sandiford
2016-12-09 13:14 ` [32/67] Check is_a <scalar_int_mode> before calling valid_pointer_mode Richard Sandiford
2016-12-09 13:15 ` [34/67] Add a SCALAR_INT_TYPE_MODE macro Richard Sandiford
2016-12-09 13:16 ` [36/67] Use scalar_int_mode in the RTL iv routines Richard Sandiford
2016-12-09 13:16 ` [35/67] Add uses of as_a <scalar_int_mode> Richard Sandiford
2016-12-09 13:17 ` [37/67] Use scalar_int_mode when emitting cstores Richard Sandiford
2016-12-09 13:17 ` [38/67] Move SCALAR_INT_MODE_P out of strict_volatile_bitfield_p Richard Sandiford
2016-12-09 13:18 ` [39/67] Two changes to the get_best_mode interface Richard Sandiford
2016-12-09 13:19 ` [40/67] Use scalar_int_mode for extraction_insn fields Richard Sandiford
2016-12-09 13:20 ` [41/67] Split scalar integer handling out of force_to_mode Richard Sandiford
2016-12-09 13:20 ` [42/67] Use scalar_int_mode in simplify_shift_const_1 Richard Sandiford
2016-12-09 13:22 ` [43/67] Use scalar_int_mode in simplify_comparison Richard Sandiford
2016-12-09 13:22 ` [44/67] Make simplify_and_const_int take a scalar_int_mode Richard Sandiford
2016-12-09 13:23 ` Richard Sandiford [this message]
2016-12-09 13:23 ` [46/67] Make widest_int_mode_for_size return " Richard Sandiford
2016-12-09 13:24 ` [47/67] Make subroutines of nonzero_bits operate on scalar_int_mode Richard Sandiford
2016-12-09 13:25 ` [49/67] Simplify nonzero/num_sign_bits hooks Richard Sandiford
2016-12-09 13:25 ` [48/67] Make subroutines of num_sign_bit_copies operate on scalar_int_mode Richard Sandiford
2016-12-09 13:28 ` [50/67] Add helper routines for SUBREG_PROMOTED_VAR_P subregs Richard Sandiford
2016-12-09 13:30 ` [51/67] Use opt_scalar_int_mode when iterating over integer modes Richard Sandiford
2016-12-09 13:30 ` [52/67] Use scalar_int_mode in extract/store_bit_field Richard Sandiford
2016-12-09 13:31 ` [53/67] Pass a mode to const_scalar_mask_from_tree Richard Sandiford
2016-12-09 13:31 ` [54/67] Add explicit int checks for alternative optab implementations Richard Sandiford
2016-12-09 13:33 ` [55/67] Use scalar_int_mode in simplify_const_unary_operation Richard Sandiford
2016-12-09 13:33 ` [56/67] Use the more specific type when two modes are known to be equal Richard Sandiford
2016-12-09 13:34 ` [57/67] Use scalar_int_mode in expand_expr_addr_expr Richard Sandiford
2016-12-09 13:35 ` [58/67] Use scalar_int_mode in a try_combine optimisation Richard Sandiford
2016-12-09 13:36 ` [60/67] Pass scalar_int_modes to do_jump_by_parts_* Richard Sandiford
2016-12-09 13:36 ` [59/67] Add a rtx_jump_table_data::get_data_mode helper Richard Sandiford
2016-12-09 13:37 ` [61/67] Use scalar_int_mode in the AArch64 port Richard Sandiford
2016-12-09 13:38 ` [63/67] Simplifications after type switch Richard Sandiford
2016-12-09 13:38 ` [62/67] Big machine_mode to scalar_int_mode replacement Richard Sandiford
2016-12-09 13:40 ` [64/67] Add a scalar_mode class Richard Sandiford
2016-12-09 13:40 ` [65/67] Use scalar_mode in the AArch64 port Richard Sandiford
2016-12-09 13:40 ` [66/67] Add a scalar_mode_pod class Richard Sandiford
2016-12-09 13:41 ` [67/67] Add a complex_mode class Richard Sandiford
2016-12-09 18:20 ` [0/67] Add wrapper classes for machine_modes Sandra Loosemore
2017-05-05 7:08 ` Jeff Law
2017-05-24 14:33 ` Richard Sandiford
2017-06-28 17:27 ` Jeff Law
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=8737hxi6dt.fsf@e105548-lin.cambridge.arm.com \
--to=richard.sandiford@arm.com \
--cc=gcc-patches@gcc.gnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).