From: Richard Sandiford <rdsandiford@googlemail.com>
To: GCC Patches <gcc-patches@gcc.gnu.org>
Cc: Jakub Jelinek <jakub@redhat.com>
Subject: Re: [hsa 1/10] Configury changes and new options
Date: Tue, 08 Dec 2015 22:43:00 -0000 [thread overview]
Message-ID: <87vb88imt8.fsf@googlemail.com> (raw)
In-Reply-To: <20151207111908.GB24234@virgil.suse.cz> (Martin Jambor's message of "Mon, 7 Dec 2015 12:19:08 +0100")
[Sorry for the low-quality review, was just reading out of interest...]
Martin Jambor <mjambor@suse.cz> writes:
> +If you configure GCC with HSA offloading but do not have the HSA
> +run-time library installed in a standard location then you can
> +explicitely specify the directory where they are installed. The
typo: explicitly
> diff --git a/gcc/lto-wrapper.c b/gcc/lto-wrapper.c
> index e4772d1..5609207 100644
> --- a/gcc/lto-wrapper.c
> +++ b/gcc/lto-wrapper.c
> @@ -745,6 +745,11 @@ compile_images_for_offload_targets (unsigned in_argc, char *in_argv[],
> offload_names = XCNEWVEC (char *, num_targets + 1);
> for (unsigned i = 0; i < num_targets; i++)
> {
> + /* HSA does not use LTO-like streaming and a different compiler, skip
> + it. */
> + if (strncmp(names[i], "hsa", 3) == 0)
> + continue;
> +
> offload_names[i]
> = compile_offload_image (names[i], compiler_path, in_argc, in_argv,
> compiler_opts, compiler_opt_count,
Looks like this would cause the caller loop:
if (offload_names)
{
find_offloadbeginend ();
for (i = 0; offload_names[i]; i++)
printf ("%s\n", offload_names[i]);
free_array_of_ptrs ((void **) offload_names, i);
}
to terminate early if there was another target after hsa.
names[i] is null-terminated, so it looks like you're deliberately
allowing anything that starts with "hsa" here, but:
> diff --git a/gcc/opts.c b/gcc/opts.c
> index 874c84f..5647f0c 100644
> --- a/gcc/opts.c
> +++ b/gcc/opts.c
> @@ -1906,8 +1906,35 @@ common_handle_option (struct gcc_options *opts,
> break;
>
> case OPT_foffload_:
> - /* Deferred. */
> - break;
> + {
> + const char *p = arg;
> + opts->x_flag_disable_hsa = true;
> + while (*p != 0)
> + {
> + const char *comma = strchr (p, ',');
> +
> + if ((strncmp (p, "disable", 7) == 0)
> + && (p[7] == ',' || p[7] == '\0'))
> + {
> + opts->x_flag_disable_hsa = true;
> + break;
> + }
> +
> + if ((strncmp (p, "hsa", 3) == 0)
> + && (p[3] == ',' || p[3] == '\0'))
> + {
> +#ifdef ENABLE_HSA
> + opts->x_flag_disable_hsa = false;
> +#else
> + sorry ("HSA has not been enabled during configuration");
> +#endif
...here you only allow "hsa" itself.
(Not your fault, but: do we have any documentation for -foffload
and -foffload-abi? Couldn't see any in the texi files.)
Thanks,
Richard
next prev parent reply other threads:[~2015-12-08 22:43 UTC|newest]
Thread overview: 71+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-12-07 11:18 [hsa 0/10] Merge of HSA branch Martin Jambor
2015-12-07 11:19 ` [hsa 1/10] Configury changes and new options Martin Jambor
2015-12-08 22:43 ` Richard Sandiford [this message]
2015-12-10 17:52 ` Martin Jambor
2015-12-11 17:42 ` Jakub Jelinek
2015-12-10 17:52 ` Martin Jambor
2015-12-07 11:20 ` [hsa 2/10] Modifications to libgomp proper Martin Jambor
2015-12-09 11:55 ` Jakub Jelinek
2015-12-10 17:52 ` Martin Jambor
2015-12-11 18:05 ` Jakub Jelinek
2016-01-12 13:46 ` Martin Jambor
2016-01-12 14:23 ` Jakub Jelinek
2016-01-15 20:00 ` Jakub Jelinek
2016-01-12 13:00 ` Alexander Monakov
2016-01-12 13:10 ` Jakub Jelinek
[not found] ` <20160112132905.GM3060@virgil.suse.cz>
2016-01-12 13:38 ` Jakub Jelinek
2016-01-12 18:51 ` Martin Jambor
2015-12-07 11:20 ` [hsa 3/10] HSA libgomp plugin Martin Jambor
2015-12-09 12:16 ` Jakub Jelinek
2015-12-10 12:06 ` [hsa 3/10] HSA libgomp plugin [part 1/2] Martin Liška
2015-12-10 12:06 ` [hsa 3/10] HSA libgomp plugin [part 2/2] Martin Liška
2015-12-07 11:21 ` [hsa 4/10] Merge of HSA branch Martin Jambor
2015-12-09 12:17 ` Jakub Jelinek
2015-12-07 11:23 ` [hsa 5/10] OpenMP lowering/expansion changes (gridification) Martin Jambor
2015-12-09 13:19 ` Jakub Jelinek
2015-12-09 16:25 ` Splitting up gcc/omp-low.c? (was: [hsa 5/10] OpenMP lowering/expansion changes (gridification)) Thomas Schwinge
2015-12-09 17:23 ` Splitting up gcc/omp-low.c? Bernd Schmidt
2015-12-10 8:08 ` Jakub Jelinek
2015-12-10 11:26 ` Bernd Schmidt
2015-12-10 11:34 ` Jakub Jelinek
2015-12-15 18:28 ` Nathan Sidwell
2016-04-08 9:36 ` Thomas Schwinge
2016-04-08 10:46 ` Martin Jambor
2016-04-08 11:08 ` Jakub Jelinek
2016-04-13 16:01 ` Thomas Schwinge
2016-04-13 17:38 ` Bernd Schmidt
2016-04-13 17:56 ` Thomas Schwinge
2016-04-13 18:20 ` Bernd Schmidt
2016-04-14 13:36 ` Thomas Schwinge
2016-04-14 16:01 ` Bernd Schmidt
2016-04-14 16:01 ` Thomas Schwinge
2016-04-14 20:28 ` Split out OMP constructs' SIMD clone supporting code (was: Splitting up gcc/omp-low.c?) Thomas Schwinge
2016-04-15 6:25 ` Split out OMP constructs' SIMD clone supporting code Thomas Schwinge
2016-04-15 11:15 ` Split out OMP constructs' SIMD clone supporting code (was: Splitting up gcc/omp-low.c?) Jakub Jelinek
2016-04-15 11:53 ` Thomas Schwinge
2016-04-15 11:57 ` Jakub Jelinek
2016-04-15 12:11 ` Thomas Schwinge
2016-04-15 12:15 ` Jakub Jelinek
2016-04-15 14:33 ` Thomas Schwinge
2016-05-03 9:34 ` Splitting up gcc/omp-low.c? Thomas Schwinge
2016-05-11 13:44 ` Thomas Schwinge
2016-05-18 11:42 ` Thomas Schwinge
2016-05-25 9:17 ` Thomas Schwinge
2016-05-25 12:54 ` Martin Jambor
2015-12-18 14:29 ` [hsa 5/10] OpenMP lowering/expansion changes (gridification) Martin Jambor
2015-12-07 11:24 ` [hsa 6/10] Pass manager changes Martin Jambor
2015-12-09 13:20 ` Jakub Jelinek
2015-12-09 13:47 ` Richard Biener
2015-12-07 11:25 ` [hsa 7/10] IPA-HSA pass Martin Jambor
2015-12-07 11:27 ` [hsa 8/10] HSAIL BRIG description header file (and a steering committee request) Martin Jambor
2015-12-07 11:29 ` [hsa 9/10] Majority of the HSA back-end Martin Jambor
2015-12-07 11:30 ` [hsa 10/10] HSA register allocator Martin Jambor
2015-12-07 11:46 ` [hsa 0/10] Merge of HSA branch Jakub Jelinek
2015-12-10 17:51 ` Martin Jambor
2016-01-26 10:46 ` (Non-)offloading diagnostics (was: [hsa 0/10] Merge of HSA branch) Thomas Schwinge
2016-01-26 11:18 ` Alexander Monakov
2016-01-26 11:38 ` (Non-)offloading diagnostics Thomas Schwinge
2016-02-26 16:46 ` Thomas Schwinge
2016-02-26 17:18 ` Martin Jambor
2016-02-26 17:51 ` Jakub Jelinek
2016-02-26 18:48 ` Martin Jambor
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87vb88imt8.fsf@googlemail.com \
--to=rdsandiford@googlemail.com \
--cc=gcc-patches@gcc.gnu.org \
--cc=jakub@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).