From: Richard Sandiford <richard.sandiford@arm.com>
To: gcc-patches@gcc.gnu.org
Subject: [38/67] Move SCALAR_INT_MODE_P out of strict_volatile_bitfield_p
Date: Fri, 09 Dec 2016 13:17:00 -0000 [thread overview]
Message-ID: <87wpf9i6md.fsf@e105548-lin.cambridge.arm.com> (raw)
In-Reply-To: <87h96dp8u6.fsf@e105548-lin.cambridge.arm.com> (Richard Sandiford's message of "Fri, 09 Dec 2016 12:48:01 +0000")
strict_volatile_bitfield_p returns false for any mode that isn't
a scalar integer. This patch moves the check to the caller and
makes strict_volatile_bitfield_p take the mode as a scalar_int_mode.
The handling of a true return can then also use the mode as a
scalar_int_mode.
gcc/
2016-11-24 Richard Sandiford <richard.sandiford@arm.com>
Alan Hayward <alan.hayward@arm.com>
David Sherwood <david.sherwood@arm.com>
* expmed.c (strict_volatile_bitfield_p): Change the type of fieldmode
to scalar_int_mode. Remove check for SCALAR_INT_MODE_P.
(store_bit_field): Check is_a <scalar_int_mode> before calling
strict_volatile_bitfield_p.
(extract_bit_field): Likewise.
diff --git a/gcc/expmed.c b/gcc/expmed.c
index 3939c3d..f9cdcda 100644
--- a/gcc/expmed.c
+++ b/gcc/expmed.c
@@ -514,7 +514,7 @@ lowpart_bit_field_p (unsigned HOST_WIDE_INT bitnum,
static bool
strict_volatile_bitfield_p (rtx op0, unsigned HOST_WIDE_INT bitsize,
unsigned HOST_WIDE_INT bitnum,
- machine_mode fieldmode,
+ scalar_int_mode fieldmode,
unsigned HOST_WIDE_INT bitregion_start,
unsigned HOST_WIDE_INT bitregion_end)
{
@@ -527,11 +527,6 @@ strict_volatile_bitfield_p (rtx op0, unsigned HOST_WIDE_INT bitsize,
|| flag_strict_volatile_bitfields <= 0)
return false;
- /* Non-integral modes likely only happen with packed structures.
- Punt. */
- if (!SCALAR_INT_MODE_P (fieldmode))
- return false;
-
/* The bit size must not be larger than the field mode, and
the field mode must not be larger than a word. */
if (bitsize > modesize || modesize > BITS_PER_WORD)
@@ -1050,19 +1045,21 @@ store_bit_field (rtx str_rtx, unsigned HOST_WIDE_INT bitsize,
rtx value, bool reverse)
{
/* Handle -fstrict-volatile-bitfields in the cases where it applies. */
- if (strict_volatile_bitfield_p (str_rtx, bitsize, bitnum, fieldmode,
- bitregion_start, bitregion_end))
+ scalar_int_mode int_mode;
+ if (is_a <scalar_int_mode> (fieldmode, &int_mode)
+ && strict_volatile_bitfield_p (str_rtx, bitsize, bitnum, int_mode,
+ bitregion_start, bitregion_end))
{
/* Storing of a full word can be done with a simple store.
We know here that the field can be accessed with one single
instruction. For targets that support unaligned memory,
an unaligned access may be necessary. */
- if (bitsize == GET_MODE_BITSIZE (fieldmode))
+ if (bitsize == GET_MODE_BITSIZE (int_mode))
{
- str_rtx = adjust_bitfield_address (str_rtx, fieldmode,
+ str_rtx = adjust_bitfield_address (str_rtx, int_mode,
bitnum / BITS_PER_UNIT);
if (reverse)
- value = flip_storage_order (fieldmode, value);
+ value = flip_storage_order (int_mode, value);
gcc_assert (bitnum % BITS_PER_UNIT == 0);
emit_move_insn (str_rtx, value);
}
@@ -1070,12 +1067,12 @@ store_bit_field (rtx str_rtx, unsigned HOST_WIDE_INT bitsize,
{
rtx temp;
- str_rtx = narrow_bit_field_mem (str_rtx, fieldmode, bitsize, bitnum,
+ str_rtx = narrow_bit_field_mem (str_rtx, int_mode, bitsize, bitnum,
&bitnum);
- gcc_assert (bitnum + bitsize <= GET_MODE_BITSIZE (fieldmode));
+ gcc_assert (bitnum + bitsize <= GET_MODE_BITSIZE (int_mode));
temp = copy_to_reg (str_rtx);
if (!store_bit_field_1 (temp, bitsize, bitnum, 0, 0,
- fieldmode, value, reverse, true))
+ int_mode, value, reverse, true))
gcc_unreachable ();
emit_move_insn (str_rtx, temp);
@@ -1889,25 +1886,27 @@ extract_bit_field (rtx str_rtx, unsigned HOST_WIDE_INT bitsize,
else
mode1 = tmode;
- if (strict_volatile_bitfield_p (str_rtx, bitsize, bitnum, mode1, 0, 0))
+ scalar_int_mode int_mode;
+ if (is_a <scalar_int_mode> (mode1, &int_mode)
+ && strict_volatile_bitfield_p (str_rtx, bitsize, bitnum, int_mode, 0, 0))
{
- /* Extraction of a full MODE1 value can be done with a simple load.
+ /* Extraction of a full INT_MODE value can be done with a simple load.
We know here that the field can be accessed with one single
instruction. For targets that support unaligned memory,
an unaligned access may be necessary. */
- if (bitsize == GET_MODE_BITSIZE (mode1))
+ if (bitsize == GET_MODE_BITSIZE (int_mode))
{
- rtx result = adjust_bitfield_address (str_rtx, mode1,
+ rtx result = adjust_bitfield_address (str_rtx, int_mode,
bitnum / BITS_PER_UNIT);
if (reverse)
- result = flip_storage_order (mode1, result);
+ result = flip_storage_order (int_mode, result);
gcc_assert (bitnum % BITS_PER_UNIT == 0);
return convert_extracted_bit_field (result, mode, tmode, unsignedp);
}
- str_rtx = narrow_bit_field_mem (str_rtx, mode1, bitsize, bitnum,
+ str_rtx = narrow_bit_field_mem (str_rtx, int_mode, bitsize, bitnum,
&bitnum);
- gcc_assert (bitnum + bitsize <= GET_MODE_BITSIZE (mode1));
+ gcc_assert (bitnum + bitsize <= GET_MODE_BITSIZE (int_mode));
str_rtx = copy_to_reg (str_rtx);
}
next prev parent reply other threads:[~2016-12-09 13:17 UTC|newest]
Thread overview: 79+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-12-09 12:48 [0/67] Add wrapper classes for machine_modes Richard Sandiford
2016-12-09 12:50 ` [1/67] Add an E_ prefix to mode names and update case statements Richard Sandiford
2016-12-09 12:52 ` [2/67] Make machine_mode a class Richard Sandiford
2016-12-15 22:34 ` Trevor Saunders
2016-12-09 12:53 ` [3/67] Add GDB pretty printer for machine mode classes Richard Sandiford
2016-12-09 12:54 ` [4/67] Add FOR_EACH iterators for modes Richard Sandiford
2016-12-09 12:55 ` [5/67] Small tweak to array_value_type Richard Sandiford
2016-12-09 12:55 ` [6/67] Make GET_MODE_WIDER return an opt_mode Richard Sandiford
2016-12-09 12:57 ` [7/67] Add scalar_float_mode Richard Sandiford
2016-12-09 14:19 ` David Malcolm
2016-12-09 14:30 ` Richard Sandiford
2016-12-09 12:57 ` [8/67] Simplify gen_trunc/extend_conv_libfunc Richard Sandiford
2016-12-09 12:58 ` [9/67] Add SCALAR_FLOAT_TYPE_MODE Richard Sandiford
2016-12-09 12:59 ` [10/67] Make assemble_real take a scalar_float_mode Richard Sandiford
2016-12-09 13:00 ` [11/67] Add a float_mode_for_size helper function Richard Sandiford
2016-12-09 13:00 ` [12/67] Use opt_scalar_float_mode when iterating over float modes Richard Sandiford
2016-12-09 13:00 ` [0/67] Add wrapper classes for machine_modes Richard Biener
2016-12-09 13:54 ` Richard Sandiford
2016-12-09 13:01 ` [13/67] Make floatn_mode return an opt_scalar_float_mode Richard Sandiford
2016-12-09 13:02 ` [14/67] Make libgcc_floating_mode_supported_p take a scalar_float_mode Richard Sandiford
2016-12-09 13:03 ` [15/67] Add scalar_int_mode Richard Sandiford
2016-12-09 13:03 ` [16/67] Add scalar_int_mode_pod Richard Sandiford
2016-12-09 13:04 ` [17/67] Add an int_mode_for_size helper function Richard Sandiford
2016-12-09 13:05 ` [18/67] Make int_mode_for_mode return an opt_scalar_int_mode Richard Sandiford
2016-12-09 13:05 ` [19/67] Add a smallest_int_mode_for_size helper function Richard Sandiford
2016-12-09 13:06 ` [20/67] Replace MODE_INT checks with is_int_mode Richard Sandiford
2016-12-09 13:07 ` [21/67] Replace SCALAR_INT_MODE_P checks with is_a <scalar_int_mode> Richard Sandiford
2016-12-09 13:07 ` [22/67] Replace !VECTOR_MODE_P " Richard Sandiford
2016-12-09 13:08 ` [23/67] Replace != VOIDmode checks " Richard Sandiford
2016-12-09 13:08 ` [24/67] Replace a != BLKmode check " Richard Sandiford
2016-12-09 13:22 ` Richard Biener
2016-12-09 14:42 ` Richard Sandiford
2016-12-09 13:09 ` [25/67] Use is_a <scalar_int_mode> for bitmask optimisations Richard Sandiford
2016-12-09 13:10 ` [26/67] Use is_a <scalar_int_mode> in subreg/extract simplifications Richard Sandiford
2016-12-09 13:10 ` [27/67] Use is_a <scalar_int_mode> before LOAD_EXTEND_OP Richard Sandiford
2016-12-09 13:11 ` [28/67] Use is_a <scalar_int_mode> for miscellaneous types of test Richard Sandiford
2016-12-09 13:12 ` [29/67] Make some *_loc_descriptor helpers take scalar_int_mode Richard Sandiford
2016-12-09 13:12 ` [30/67] Use scalar_int_mode for doubleword splits Richard Sandiford
2016-12-09 13:13 ` [31/67] Use scalar_int_mode for move2add Richard Sandiford
2016-12-09 13:14 ` [33/67] Add a NARROWEST_INT_MODE macro Richard Sandiford
2016-12-09 13:14 ` [32/67] Check is_a <scalar_int_mode> before calling valid_pointer_mode Richard Sandiford
2016-12-09 13:15 ` [34/67] Add a SCALAR_INT_TYPE_MODE macro Richard Sandiford
2016-12-09 13:16 ` [36/67] Use scalar_int_mode in the RTL iv routines Richard Sandiford
2016-12-09 13:16 ` [35/67] Add uses of as_a <scalar_int_mode> Richard Sandiford
2016-12-09 13:17 ` [37/67] Use scalar_int_mode when emitting cstores Richard Sandiford
2016-12-09 13:17 ` Richard Sandiford [this message]
2016-12-09 13:18 ` [39/67] Two changes to the get_best_mode interface Richard Sandiford
2016-12-09 13:19 ` [40/67] Use scalar_int_mode for extraction_insn fields Richard Sandiford
2016-12-09 13:20 ` [41/67] Split scalar integer handling out of force_to_mode Richard Sandiford
2016-12-09 13:20 ` [42/67] Use scalar_int_mode in simplify_shift_const_1 Richard Sandiford
2016-12-09 13:22 ` [44/67] Make simplify_and_const_int take a scalar_int_mode Richard Sandiford
2016-12-09 13:22 ` [43/67] Use scalar_int_mode in simplify_comparison Richard Sandiford
2016-12-09 13:23 ` [46/67] Make widest_int_mode_for_size return a scalar_int_mode Richard Sandiford
2016-12-09 13:23 ` [45/67] Make extract_left_shift take " Richard Sandiford
2016-12-09 13:24 ` [47/67] Make subroutines of nonzero_bits operate on scalar_int_mode Richard Sandiford
2016-12-09 13:25 ` [48/67] Make subroutines of num_sign_bit_copies " Richard Sandiford
2016-12-09 13:25 ` [49/67] Simplify nonzero/num_sign_bits hooks Richard Sandiford
2016-12-09 13:28 ` [50/67] Add helper routines for SUBREG_PROMOTED_VAR_P subregs Richard Sandiford
2016-12-09 13:30 ` [52/67] Use scalar_int_mode in extract/store_bit_field Richard Sandiford
2016-12-09 13:30 ` [51/67] Use opt_scalar_int_mode when iterating over integer modes Richard Sandiford
2016-12-09 13:31 ` [54/67] Add explicit int checks for alternative optab implementations Richard Sandiford
2016-12-09 13:31 ` [53/67] Pass a mode to const_scalar_mask_from_tree Richard Sandiford
2016-12-09 13:33 ` [56/67] Use the more specific type when two modes are known to be equal Richard Sandiford
2016-12-09 13:33 ` [55/67] Use scalar_int_mode in simplify_const_unary_operation Richard Sandiford
2016-12-09 13:34 ` [57/67] Use scalar_int_mode in expand_expr_addr_expr Richard Sandiford
2016-12-09 13:35 ` [58/67] Use scalar_int_mode in a try_combine optimisation Richard Sandiford
2016-12-09 13:36 ` [59/67] Add a rtx_jump_table_data::get_data_mode helper Richard Sandiford
2016-12-09 13:36 ` [60/67] Pass scalar_int_modes to do_jump_by_parts_* Richard Sandiford
2016-12-09 13:37 ` [61/67] Use scalar_int_mode in the AArch64 port Richard Sandiford
2016-12-09 13:38 ` [62/67] Big machine_mode to scalar_int_mode replacement Richard Sandiford
2016-12-09 13:38 ` [63/67] Simplifications after type switch Richard Sandiford
2016-12-09 13:40 ` [65/67] Use scalar_mode in the AArch64 port Richard Sandiford
2016-12-09 13:40 ` [66/67] Add a scalar_mode_pod class Richard Sandiford
2016-12-09 13:40 ` [64/67] Add a scalar_mode class Richard Sandiford
2016-12-09 13:41 ` [67/67] Add a complex_mode class Richard Sandiford
2016-12-09 18:20 ` [0/67] Add wrapper classes for machine_modes Sandra Loosemore
2017-05-05 7:08 ` Jeff Law
2017-05-24 14:33 ` Richard Sandiford
2017-06-28 17:27 ` Jeff Law
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87wpf9i6md.fsf@e105548-lin.cambridge.arm.com \
--to=richard.sandiford@arm.com \
--cc=gcc-patches@gcc.gnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).