public inbox for gcc-patches@gcc.gnu.org
 help / color / mirror / Atom feed
From: Richard Sandiford <richard.sandiford@arm.com>
To: gcc-patches@gcc.gnu.org
Subject: [46/67] Make widest_int_mode_for_size return a scalar_int_mode
Date: Fri, 09 Dec 2016 13:23:00 -0000	[thread overview]
Message-ID: <87y3zpgrs3.fsf@e105548-lin.cambridge.arm.com> (raw)
In-Reply-To: <87h96dp8u6.fsf@e105548-lin.cambridge.arm.com> (Richard	Sandiford's message of "Fri, 09 Dec 2016 12:48:01 +0000")

The comment for widest_int_mode said that it returns "the widest integer
mode no wider than SIZE", but it actually returns the widest integer
mode that is narrower than SIZE.  In practice SIZE is always greater
than 1, so it can always pick QImode in the worst case.  The VOIDmode
paths seem to be dead.

gcc/
2016-11-24  Richard Sandiford  <richard.sandiford@arm.com>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* expr.c (widest_int_mode_for_size): Make the comment match the code.
	Return a scalar_int_mode and assert that the size is greater than
	one byte.
	(by_pieces_ninsns): Update accordingly and remove VOIDmode handling.
	(op_by_pieces_d::op_by_pieces_d): Likewise.
	(op_by_pieces_d::run): Likewise.
	(can_store_by_pieces): Likewise.

diff --git a/gcc/expr.c b/gcc/expr.c
index d54cc65..408a8bd 100644
--- a/gcc/expr.c
+++ b/gcc/expr.c
@@ -720,19 +720,21 @@ alignment_for_piecewise_move (unsigned int max_pieces, unsigned int align)
   return align;
 }
 
-/* Return the widest integer mode no wider than SIZE.  If no such mode
-   can be found, return VOIDmode.  */
+/* Return the widest integer mode that is narrower than SIZE bytes.  */
 
-static machine_mode
+static scalar_int_mode
 widest_int_mode_for_size (unsigned int size)
 {
-  machine_mode tmode, mode = VOIDmode;
+  scalar_int_mode result = NARROWEST_INT_MODE;
 
+  gcc_checking_assert (size > 1);
+
+  opt_scalar_int_mode tmode;
   FOR_EACH_MODE_IN_CLASS (tmode, MODE_INT)
-    if (GET_MODE_SIZE (tmode) < size)
-      mode = tmode;
+    if (GET_MODE_SIZE (*tmode) < size)
+      result = *tmode;
 
-  return mode;
+  return result;
 }
 
 /* Determine whether an operation OP on LEN bytes with alignment ALIGN can
@@ -769,13 +771,9 @@ by_pieces_ninsns (unsigned HOST_WIDE_INT l, unsigned int align,
 
   while (max_size > 1 && l > 0)
     {
-      machine_mode mode;
+      scalar_int_mode mode = widest_int_mode_for_size (max_size);
       enum insn_code icode;
 
-      mode = widest_int_mode_for_size (max_size);
-
-      if (mode == VOIDmode)
-	break;
       unsigned int modesize = GET_MODE_SIZE (mode);
 
       icode = optab_handler (mov_optab, mode);
@@ -1051,7 +1049,7 @@ op_by_pieces_d::op_by_pieces_d (rtx to, bool to_load,
   if (by_pieces_ninsns (len, align, m_max_size, MOVE_BY_PIECES) > 2)
     {
       /* Find the mode of the largest comparison.  */
-      machine_mode mode = widest_int_mode_for_size (m_max_size);
+      scalar_int_mode mode = widest_int_mode_for_size (m_max_size);
 
       m_from.decide_autoinc (mode, m_reverse, len);
       m_to.decide_autoinc (mode, m_reverse, len);
@@ -1071,10 +1069,7 @@ op_by_pieces_d::run ()
 {
   while (m_max_size > 1 && m_len > 0)
     {
-      machine_mode mode = widest_int_mode_for_size (m_max_size);
-
-      if (mode == VOIDmode)
-	break;
+      scalar_int_mode mode = widest_int_mode_for_size (m_max_size);
 
       if (prepare_mode (mode, m_align))
 	{
@@ -1285,7 +1280,6 @@ can_store_by_pieces (unsigned HOST_WIDE_INT len,
   unsigned HOST_WIDE_INT l;
   unsigned int max_size;
   HOST_WIDE_INT offset = 0;
-  machine_mode mode;
   enum insn_code icode;
   int reverse;
   /* cst is set but not used if LEGITIMATE_CONSTANT doesn't use it.  */
@@ -1314,10 +1308,7 @@ can_store_by_pieces (unsigned HOST_WIDE_INT len,
       max_size = STORE_MAX_PIECES + 1;
       while (max_size > 1 && l > 0)
 	{
-	  mode = widest_int_mode_for_size (max_size);
-
-	  if (mode == VOIDmode)
-	    break;
+	  scalar_int_mode mode = widest_int_mode_for_size (max_size);
 
 	  icode = optab_handler (mov_optab, mode);
 	  if (icode != CODE_FOR_nothing

  parent reply	other threads:[~2016-12-09 13:23 UTC|newest]

Thread overview: 79+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-12-09 12:48 [0/67] Add wrapper classes for machine_modes Richard Sandiford
2016-12-09 12:50 ` [1/67] Add an E_ prefix to mode names and update case statements Richard Sandiford
2016-12-09 12:52 ` [2/67] Make machine_mode a class Richard Sandiford
2016-12-15 22:34   ` Trevor Saunders
2016-12-09 12:53 ` [3/67] Add GDB pretty printer for machine mode classes Richard Sandiford
2016-12-09 12:54 ` [4/67] Add FOR_EACH iterators for modes Richard Sandiford
2016-12-09 12:55 ` [5/67] Small tweak to array_value_type Richard Sandiford
2016-12-09 12:55 ` [6/67] Make GET_MODE_WIDER return an opt_mode Richard Sandiford
2016-12-09 12:57 ` [8/67] Simplify gen_trunc/extend_conv_libfunc Richard Sandiford
2016-12-09 12:57 ` [7/67] Add scalar_float_mode Richard Sandiford
2016-12-09 14:19   ` David Malcolm
2016-12-09 14:30     ` Richard Sandiford
2016-12-09 12:58 ` [9/67] Add SCALAR_FLOAT_TYPE_MODE Richard Sandiford
2016-12-09 12:59 ` [10/67] Make assemble_real take a scalar_float_mode Richard Sandiford
2016-12-09 13:00 ` [12/67] Use opt_scalar_float_mode when iterating over float modes Richard Sandiford
2016-12-09 13:00 ` [11/67] Add a float_mode_for_size helper function Richard Sandiford
2016-12-09 13:00 ` [0/67] Add wrapper classes for machine_modes Richard Biener
2016-12-09 13:54   ` Richard Sandiford
2016-12-09 13:01 ` [13/67] Make floatn_mode return an opt_scalar_float_mode Richard Sandiford
2016-12-09 13:02 ` [14/67] Make libgcc_floating_mode_supported_p take a scalar_float_mode Richard Sandiford
2016-12-09 13:03 ` [15/67] Add scalar_int_mode Richard Sandiford
2016-12-09 13:03 ` [16/67] Add scalar_int_mode_pod Richard Sandiford
2016-12-09 13:04 ` [17/67] Add an int_mode_for_size helper function Richard Sandiford
2016-12-09 13:05 ` [18/67] Make int_mode_for_mode return an opt_scalar_int_mode Richard Sandiford
2016-12-09 13:05 ` [19/67] Add a smallest_int_mode_for_size helper function Richard Sandiford
2016-12-09 13:06 ` [20/67] Replace MODE_INT checks with is_int_mode Richard Sandiford
2016-12-09 13:07 ` [21/67] Replace SCALAR_INT_MODE_P checks with is_a <scalar_int_mode> Richard Sandiford
2016-12-09 13:07 ` [22/67] Replace !VECTOR_MODE_P " Richard Sandiford
2016-12-09 13:08 ` [24/67] Replace a != BLKmode check " Richard Sandiford
2016-12-09 13:22   ` Richard Biener
2016-12-09 14:42     ` Richard Sandiford
2016-12-09 13:08 ` [23/67] Replace != VOIDmode checks " Richard Sandiford
2016-12-09 13:09 ` [25/67] Use is_a <scalar_int_mode> for bitmask optimisations Richard Sandiford
2016-12-09 13:10 ` [26/67] Use is_a <scalar_int_mode> in subreg/extract simplifications Richard Sandiford
2016-12-09 13:10 ` [27/67] Use is_a <scalar_int_mode> before LOAD_EXTEND_OP Richard Sandiford
2016-12-09 13:11 ` [28/67] Use is_a <scalar_int_mode> for miscellaneous types of test Richard Sandiford
2016-12-09 13:12 ` [30/67] Use scalar_int_mode for doubleword splits Richard Sandiford
2016-12-09 13:12 ` [29/67] Make some *_loc_descriptor helpers take scalar_int_mode Richard Sandiford
2016-12-09 13:13 ` [31/67] Use scalar_int_mode for move2add Richard Sandiford
2016-12-09 13:14 ` [33/67] Add a NARROWEST_INT_MODE macro Richard Sandiford
2016-12-09 13:14 ` [32/67] Check is_a <scalar_int_mode> before calling valid_pointer_mode Richard Sandiford
2016-12-09 13:15 ` [34/67] Add a SCALAR_INT_TYPE_MODE macro Richard Sandiford
2016-12-09 13:16 ` [36/67] Use scalar_int_mode in the RTL iv routines Richard Sandiford
2016-12-09 13:16 ` [35/67] Add uses of as_a <scalar_int_mode> Richard Sandiford
2016-12-09 13:17 ` [38/67] Move SCALAR_INT_MODE_P out of strict_volatile_bitfield_p Richard Sandiford
2016-12-09 13:17 ` [37/67] Use scalar_int_mode when emitting cstores Richard Sandiford
2016-12-09 13:18 ` [39/67] Two changes to the get_best_mode interface Richard Sandiford
2016-12-09 13:19 ` [40/67] Use scalar_int_mode for extraction_insn fields Richard Sandiford
2016-12-09 13:20 ` [42/67] Use scalar_int_mode in simplify_shift_const_1 Richard Sandiford
2016-12-09 13:20 ` [41/67] Split scalar integer handling out of force_to_mode Richard Sandiford
2016-12-09 13:22 ` [44/67] Make simplify_and_const_int take a scalar_int_mode Richard Sandiford
2016-12-09 13:22 ` [43/67] Use scalar_int_mode in simplify_comparison Richard Sandiford
2016-12-09 13:23 ` Richard Sandiford [this message]
2016-12-09 13:23 ` [45/67] Make extract_left_shift take a scalar_int_mode Richard Sandiford
2016-12-09 13:24 ` [47/67] Make subroutines of nonzero_bits operate on scalar_int_mode Richard Sandiford
2016-12-09 13:25 ` [48/67] Make subroutines of num_sign_bit_copies " Richard Sandiford
2016-12-09 13:25 ` [49/67] Simplify nonzero/num_sign_bits hooks Richard Sandiford
2016-12-09 13:28 ` [50/67] Add helper routines for SUBREG_PROMOTED_VAR_P subregs Richard Sandiford
2016-12-09 13:30 ` [52/67] Use scalar_int_mode in extract/store_bit_field Richard Sandiford
2016-12-09 13:30 ` [51/67] Use opt_scalar_int_mode when iterating over integer modes Richard Sandiford
2016-12-09 13:31 ` [53/67] Pass a mode to const_scalar_mask_from_tree Richard Sandiford
2016-12-09 13:31 ` [54/67] Add explicit int checks for alternative optab implementations Richard Sandiford
2016-12-09 13:33 ` [55/67] Use scalar_int_mode in simplify_const_unary_operation Richard Sandiford
2016-12-09 13:33 ` [56/67] Use the more specific type when two modes are known to be equal Richard Sandiford
2016-12-09 13:34 ` [57/67] Use scalar_int_mode in expand_expr_addr_expr Richard Sandiford
2016-12-09 13:35 ` [58/67] Use scalar_int_mode in a try_combine optimisation Richard Sandiford
2016-12-09 13:36 ` [59/67] Add a rtx_jump_table_data::get_data_mode helper Richard Sandiford
2016-12-09 13:36 ` [60/67] Pass scalar_int_modes to do_jump_by_parts_* Richard Sandiford
2016-12-09 13:37 ` [61/67] Use scalar_int_mode in the AArch64 port Richard Sandiford
2016-12-09 13:38 ` [62/67] Big machine_mode to scalar_int_mode replacement Richard Sandiford
2016-12-09 13:38 ` [63/67] Simplifications after type switch Richard Sandiford
2016-12-09 13:40 ` [66/67] Add a scalar_mode_pod class Richard Sandiford
2016-12-09 13:40 ` [65/67] Use scalar_mode in the AArch64 port Richard Sandiford
2016-12-09 13:40 ` [64/67] Add a scalar_mode class Richard Sandiford
2016-12-09 13:41 ` [67/67] Add a complex_mode class Richard Sandiford
2016-12-09 18:20 ` [0/67] Add wrapper classes for machine_modes Sandra Loosemore
2017-05-05  7:08 ` Jeff Law
2017-05-24 14:33   ` Richard Sandiford
2017-06-28 17:27     ` Jeff Law

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=87y3zpgrs3.fsf@e105548-lin.cambridge.arm.com \
    --to=richard.sandiford@arm.com \
    --cc=gcc-patches@gcc.gnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).