* [RFC PATCH] gcc: Improve reproducability when building cc1/cc1plus @ 2021-11-20 8:17 Jacob Kroon 2021-11-20 8:24 ` Andrew Pinski 0 siblings, 1 reply; 5+ messages in thread From: Jacob Kroon @ 2021-11-20 8:17 UTC (permalink / raw) To: gcc-patches cc1/cc1plus both include a checksum of the object files, archives and options used during linking. Unless the host binutils has been built with --enable-deterministic-archives, the archives will have different checksums each build due to changes in timestamps of the containing object files, and thus the checksum that is embedded in cc1/cc1plus will also change. Fix this by passing "D" to ar/ranlib when creating the archives. Signed-off-by: Jacob Kroon <jacob.kroon@gmail.com> --- Makefile.in | 4 ++-- gcc/Makefile.in | 2 +- libbacktrace/configure | 2 +- libcody/Makefile.in | 4 ++-- libcpp/Makefile.in | 4 ++-- libdecnumber/Makefile.in | 4 ++-- libiberty/Makefile.in | 6 +++--- 7 files changed, 13 insertions(+), 13 deletions(-) diff --git a/Makefile.in b/Makefile.in index 860cf8f067b..8c451ed2121 100644 --- a/Makefile.in +++ b/Makefile.in @@ -416,7 +416,7 @@ MAKEINFOFLAGS = --split-size=5000000 AS = @AS@ AR = @AR@ -AR_FLAGS = rc +AR_FLAGS = rcD CC = @CC@ CXX = @CXX@ DLLTOOL = @DLLTOOL@ @@ -23571,7 +23571,7 @@ configure-libbacktrace: $$s/$$module_srcdir/configure \ --srcdir=$${topdir}/$$module_srcdir \ $(HOST_CONFIGARGS) --build=${build_alias} --host=${host_alias} \ - --target=${target_alias} \ + --target=${target_alias} RANLIB="ranlib -D" \ || exit 1 @endif libbacktrace diff --git a/gcc/Makefile.in b/gcc/Makefile.in index 571e9c28e29..828b13d9b54 100644 --- a/gcc/Makefile.in +++ b/gcc/Makefile.in @@ -243,7 +243,7 @@ AR = @AR@ AR_FLAGS = rc NM = @NM@ RANLIB = @RANLIB@ -RANLIB_FLAGS = @ranlib_flags@ +RANLIB_FLAGS = @ranlib_flags@ -D # Libraries to use on the host. HOST_LIBS = @HOST_LIBS@ diff --git a/libbacktrace/configure b/libbacktrace/configure index a2f33c0f35d..5b18966ea80 100755 --- a/libbacktrace/configure +++ b/libbacktrace/configure @@ -6669,7 +6669,7 @@ else fi test -z "$AR" && AR=ar -test -z "$AR_FLAGS" && AR_FLAGS=cru +test -z "$AR_FLAGS" && AR_FLAGS=crD diff --git a/libcody/Makefile.in b/libcody/Makefile.in index 7eaf8ace8ce..f1e8be352b5 100644 --- a/libcody/Makefile.in +++ b/libcody/Makefile.in @@ -126,8 +126,8 @@ LIBCODY.O := buffer.o client.o fatal.o netclient.o netserver.o \ all:: libcody.a libcody.a: $(LIBCODY.O) - $(AR) -cr $@ $^ - $(RANLIB) $@ + $(AR) -crD $@ $^ + $(RANLIB) -D $@ mostlyclean:: diff --git a/libcpp/Makefile.in b/libcpp/Makefile.in index 34e4206957d..53d220c4e0b 100644 --- a/libcpp/Makefile.in +++ b/libcpp/Makefile.in @@ -26,7 +26,7 @@ top_builddir = . VPATH = @srcdir@ INSTALL = @INSTALL@ AR = @AR@ -ARFLAGS = cru +ARFLAGS = crD ACLOCAL = @ACLOCAL@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ @@ -101,7 +101,7 @@ all: libcpp.a $(USED_CATALOGS) libcpp.a: $(libcpp_a_OBJS) -rm -f libcpp.a $(AR) $(ARFLAGS) libcpp.a $(libcpp_a_OBJS) - $(RANLIB) libcpp.a + $(RANLIB) -D libcpp.a # Rules to rebuild the configuration diff --git a/libdecnumber/Makefile.in b/libdecnumber/Makefile.in index 7e086fccafa..3b03064fc4d 100644 --- a/libdecnumber/Makefile.in +++ b/libdecnumber/Makefile.in @@ -26,7 +26,7 @@ top_builddir = . VPATH = @srcdir@ INSTALL = @INSTALL@ AR = @AR@ -ARFLAGS = cru +ARFLAGS = crD ACLOCAL = @ACLOCAL@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ @@ -88,7 +88,7 @@ all: libdecnumber.a libdecnumber.a: $(libdecnumber_a_OBJS) -rm -f $@ $(AR) $(ARFLAGS) $@ $(libdecnumber_a_OBJS) - $(RANLIB) $@ + $(RANLIB) -D $@ # Rules to rebuild the configuration diff --git a/libiberty/Makefile.in b/libiberty/Makefile.in index 884cc6c4af2..9f507a54657 100644 --- a/libiberty/Makefile.in +++ b/libiberty/Makefile.in @@ -252,19 +252,19 @@ $(TARGETLIB): $(REQUIRED_OFILES) $(EXTRA_OFILES) $(LIBOBJS) -rm -f $(TARGETLIB) pic/$(TARGETLIB) noasan/$(TARGETLIB) $(AR) $(AR_FLAGS) $(TARGETLIB) \ $(REQUIRED_OFILES) $(EXTRA_OFILES) $(LIBOBJS) - $(RANLIB) $(TARGETLIB) + $(RANLIB) -D $(TARGETLIB) if [ x"$(PICFLAG)" != x ]; then \ cd pic; \ $(AR) $(AR_FLAGS) $(TARGETLIB) \ $(REQUIRED_OFILES) $(EXTRA_OFILES) $(LIBOBJS); \ - $(RANLIB) $(TARGETLIB); \ + $(RANLIB) -D $(TARGETLIB); \ cd ..; \ else true; fi; \ if [ x"$(NOASANFLAG)" != x ]; then \ cd noasan; \ $(AR) $(AR_FLAGS) $(TARGETLIB) \ $(REQUIRED_OFILES) $(EXTRA_OFILES) $(LIBOBJS); \ - $(RANLIB) $(TARGETLIB); \ + $(RANLIB) -D $(TARGETLIB); \ cd ..; \ else true; fi ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [RFC PATCH] gcc: Improve reproducability when building cc1/cc1plus 2021-11-20 8:17 [RFC PATCH] gcc: Improve reproducability when building cc1/cc1plus Jacob Kroon @ 2021-11-20 8:24 ` Andrew Pinski 2021-11-20 8:32 ` Jakub Jelinek 0 siblings, 1 reply; 5+ messages in thread From: Andrew Pinski @ 2021-11-20 8:24 UTC (permalink / raw) To: Jacob Kroon; +Cc: GCC Patches On Sat, Nov 20, 2021 at 12:18 AM Jacob Kroon via Gcc-patches <gcc-patches@gcc.gnu.org> wrote: > > cc1/cc1plus both include a checksum of the object files, archives and > options used during linking. Unless the host binutils has been built > with --enable-deterministic-archives, the archives will have different > checksums each build due to changes in timestamps of the containing > object files, and thus the checksum that is embedded in cc1/cc1plus will > also change. > > Fix this by passing "D" to ar/ranlib when creating the archives. How portable is the D option? That does it work with Mac OS X's ar; what about AIX's ar; what about Solaris's ar, etc? GNU binutils is not the only ar which is supported for the host. Thanks, Andrew Pinski > > Signed-off-by: Jacob Kroon <jacob.kroon@gmail.com> > --- > Makefile.in | 4 ++-- > gcc/Makefile.in | 2 +- > libbacktrace/configure | 2 +- > libcody/Makefile.in | 4 ++-- > libcpp/Makefile.in | 4 ++-- > libdecnumber/Makefile.in | 4 ++-- > libiberty/Makefile.in | 6 +++--- > 7 files changed, 13 insertions(+), 13 deletions(-) > > diff --git a/Makefile.in b/Makefile.in > index 860cf8f067b..8c451ed2121 100644 > --- a/Makefile.in > +++ b/Makefile.in > @@ -416,7 +416,7 @@ MAKEINFOFLAGS = --split-size=5000000 > > AS = @AS@ > AR = @AR@ > -AR_FLAGS = rc > +AR_FLAGS = rcD > CC = @CC@ > CXX = @CXX@ > DLLTOOL = @DLLTOOL@ > @@ -23571,7 +23571,7 @@ configure-libbacktrace: > $$s/$$module_srcdir/configure \ > --srcdir=$${topdir}/$$module_srcdir \ > $(HOST_CONFIGARGS) --build=${build_alias} --host=${host_alias} \ > - --target=${target_alias} \ > + --target=${target_alias} RANLIB="ranlib -D" \ > || exit 1 > @endif libbacktrace > > diff --git a/gcc/Makefile.in b/gcc/Makefile.in > index 571e9c28e29..828b13d9b54 100644 > --- a/gcc/Makefile.in > +++ b/gcc/Makefile.in > @@ -243,7 +243,7 @@ AR = @AR@ > AR_FLAGS = rc > NM = @NM@ > RANLIB = @RANLIB@ > -RANLIB_FLAGS = @ranlib_flags@ > +RANLIB_FLAGS = @ranlib_flags@ -D > > # Libraries to use on the host. > HOST_LIBS = @HOST_LIBS@ > diff --git a/libbacktrace/configure b/libbacktrace/configure > index a2f33c0f35d..5b18966ea80 100755 > --- a/libbacktrace/configure > +++ b/libbacktrace/configure > @@ -6669,7 +6669,7 @@ else > fi > > test -z "$AR" && AR=ar > -test -z "$AR_FLAGS" && AR_FLAGS=cru > +test -z "$AR_FLAGS" && AR_FLAGS=crD > > > > diff --git a/libcody/Makefile.in b/libcody/Makefile.in > index 7eaf8ace8ce..f1e8be352b5 100644 > --- a/libcody/Makefile.in > +++ b/libcody/Makefile.in > @@ -126,8 +126,8 @@ LIBCODY.O := buffer.o client.o fatal.o netclient.o netserver.o \ > all:: libcody.a > > libcody.a: $(LIBCODY.O) > - $(AR) -cr $@ $^ > - $(RANLIB) $@ > + $(AR) -crD $@ $^ > + $(RANLIB) -D $@ > > mostlyclean:: > > diff --git a/libcpp/Makefile.in b/libcpp/Makefile.in > index 34e4206957d..53d220c4e0b 100644 > --- a/libcpp/Makefile.in > +++ b/libcpp/Makefile.in > @@ -26,7 +26,7 @@ top_builddir = . > VPATH = @srcdir@ > INSTALL = @INSTALL@ > AR = @AR@ > -ARFLAGS = cru > +ARFLAGS = crD > ACLOCAL = @ACLOCAL@ > AUTOCONF = @AUTOCONF@ > AUTOHEADER = @AUTOHEADER@ > @@ -101,7 +101,7 @@ all: libcpp.a $(USED_CATALOGS) > libcpp.a: $(libcpp_a_OBJS) > -rm -f libcpp.a > $(AR) $(ARFLAGS) libcpp.a $(libcpp_a_OBJS) > - $(RANLIB) libcpp.a > + $(RANLIB) -D libcpp.a > > # Rules to rebuild the configuration > > diff --git a/libdecnumber/Makefile.in b/libdecnumber/Makefile.in > index 7e086fccafa..3b03064fc4d 100644 > --- a/libdecnumber/Makefile.in > +++ b/libdecnumber/Makefile.in > @@ -26,7 +26,7 @@ top_builddir = . > VPATH = @srcdir@ > INSTALL = @INSTALL@ > AR = @AR@ > -ARFLAGS = cru > +ARFLAGS = crD > ACLOCAL = @ACLOCAL@ > AUTOCONF = @AUTOCONF@ > AUTOHEADER = @AUTOHEADER@ > @@ -88,7 +88,7 @@ all: libdecnumber.a > libdecnumber.a: $(libdecnumber_a_OBJS) > -rm -f $@ > $(AR) $(ARFLAGS) $@ $(libdecnumber_a_OBJS) > - $(RANLIB) $@ > + $(RANLIB) -D $@ > > # Rules to rebuild the configuration > > diff --git a/libiberty/Makefile.in b/libiberty/Makefile.in > index 884cc6c4af2..9f507a54657 100644 > --- a/libiberty/Makefile.in > +++ b/libiberty/Makefile.in > @@ -252,19 +252,19 @@ $(TARGETLIB): $(REQUIRED_OFILES) $(EXTRA_OFILES) $(LIBOBJS) > -rm -f $(TARGETLIB) pic/$(TARGETLIB) noasan/$(TARGETLIB) > $(AR) $(AR_FLAGS) $(TARGETLIB) \ > $(REQUIRED_OFILES) $(EXTRA_OFILES) $(LIBOBJS) > - $(RANLIB) $(TARGETLIB) > + $(RANLIB) -D $(TARGETLIB) > if [ x"$(PICFLAG)" != x ]; then \ > cd pic; \ > $(AR) $(AR_FLAGS) $(TARGETLIB) \ > $(REQUIRED_OFILES) $(EXTRA_OFILES) $(LIBOBJS); \ > - $(RANLIB) $(TARGETLIB); \ > + $(RANLIB) -D $(TARGETLIB); \ > cd ..; \ > else true; fi; \ > if [ x"$(NOASANFLAG)" != x ]; then \ > cd noasan; \ > $(AR) $(AR_FLAGS) $(TARGETLIB) \ > $(REQUIRED_OFILES) $(EXTRA_OFILES) $(LIBOBJS); \ > - $(RANLIB) $(TARGETLIB); \ > + $(RANLIB) -D $(TARGETLIB); \ > cd ..; \ > else true; fi > ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [RFC PATCH] gcc: Improve reproducability when building cc1/cc1plus 2021-11-20 8:24 ` Andrew Pinski @ 2021-11-20 8:32 ` Jakub Jelinek 2021-11-20 8:42 ` Jacob Kroon 0 siblings, 1 reply; 5+ messages in thread From: Jakub Jelinek @ 2021-11-20 8:32 UTC (permalink / raw) To: Andrew Pinski; +Cc: Jacob Kroon, GCC Patches On Sat, Nov 20, 2021 at 12:24:21AM -0800, Andrew Pinski via Gcc-patches wrote: > On Sat, Nov 20, 2021 at 12:18 AM Jacob Kroon via Gcc-patches > <gcc-patches@gcc.gnu.org> wrote: > > > > cc1/cc1plus both include a checksum of the object files, archives and > > options used during linking. Unless the host binutils has been built > > with --enable-deterministic-archives, the archives will have different > > checksums each build due to changes in timestamps of the containing > > object files, and thus the checksum that is embedded in cc1/cc1plus will > > also change. > > > > Fix this by passing "D" to ar/ranlib when creating the archives. > > How portable is the D option? That does it work with Mac OS X's ar; > what about AIX's ar; what about Solaris's ar, etc? > GNU binutils is not the only ar which is supported for the host. It isn't portable and even if ar/ranlib do support that option, not all users will want it, so forcing it upon them unconditionally is IMO not a good idea. If anything, configure needs to check if those options are supported and there needs to be preferrably non-default gcc configure option to request it. Jakub ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [RFC PATCH] gcc: Improve reproducability when building cc1/cc1plus 2021-11-20 8:32 ` Jakub Jelinek @ 2021-11-20 8:42 ` Jacob Kroon 2021-11-22 8:51 ` Richard Biener 0 siblings, 1 reply; 5+ messages in thread From: Jacob Kroon @ 2021-11-20 8:42 UTC (permalink / raw) To: Jakub Jelinek, Andrew Pinski; +Cc: GCC Patches On 11/20/21 09:32, Jakub Jelinek wrote: > On Sat, Nov 20, 2021 at 12:24:21AM -0800, Andrew Pinski via Gcc-patches wrote: >> On Sat, Nov 20, 2021 at 12:18 AM Jacob Kroon via Gcc-patches >> <gcc-patches@gcc.gnu.org> wrote: >>> >>> cc1/cc1plus both include a checksum of the object files, archives and >>> options used during linking. Unless the host binutils has been built >>> with --enable-deterministic-archives, the archives will have different >>> checksums each build due to changes in timestamps of the containing >>> object files, and thus the checksum that is embedded in cc1/cc1plus will >>> also change. >>> >>> Fix this by passing "D" to ar/ranlib when creating the archives. >> >> How portable is the D option? That does it work with Mac OS X's ar; >> what about AIX's ar; what about Solaris's ar, etc? >> GNU binutils is not the only ar which is supported for the host. > > It isn't portable and even if ar/ranlib do support that option, not all > users will want it, so forcing it upon them unconditionally is IMO not a > good idea. If anything, configure needs to check if those options are > supported and there needs to be preferrably non-default gcc configure > option to request it. > Aha, I see. Then perhaps an easier and more portable solution for improving the reproducibility would be to make it optional whether or not to include the archives when calculating the checksums. Or perhaps by checksumming the containing object files instead of the archives themselves ? Would something like that be acceptable ? Jacob ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [RFC PATCH] gcc: Improve reproducability when building cc1/cc1plus 2021-11-20 8:42 ` Jacob Kroon @ 2021-11-22 8:51 ` Richard Biener 0 siblings, 0 replies; 5+ messages in thread From: Richard Biener @ 2021-11-22 8:51 UTC (permalink / raw) To: Jacob Kroon; +Cc: Jakub Jelinek, Andrew Pinski, GCC Patches [-- Attachment #1: Type: text/plain, Size: 2032 bytes --] On Sat, Nov 20, 2021 at 9:43 AM Jacob Kroon via Gcc-patches <gcc-patches@gcc.gnu.org> wrote: > > On 11/20/21 09:32, Jakub Jelinek wrote: > > On Sat, Nov 20, 2021 at 12:24:21AM -0800, Andrew Pinski via Gcc-patches wrote: > >> On Sat, Nov 20, 2021 at 12:18 AM Jacob Kroon via Gcc-patches > >> <gcc-patches@gcc.gnu.org> wrote: > >>> > >>> cc1/cc1plus both include a checksum of the object files, archives and > >>> options used during linking. Unless the host binutils has been built > >>> with --enable-deterministic-archives, the archives will have different > >>> checksums each build due to changes in timestamps of the containing > >>> object files, and thus the checksum that is embedded in cc1/cc1plus will > >>> also change. > >>> > >>> Fix this by passing "D" to ar/ranlib when creating the archives. > >> > >> How portable is the D option? That does it work with Mac OS X's ar; > >> what about AIX's ar; what about Solaris's ar, etc? > >> GNU binutils is not the only ar which is supported for the host. > > > > It isn't portable and even if ar/ranlib do support that option, not all > > users will want it, so forcing it upon them unconditionally is IMO not a > > good idea. If anything, configure needs to check if those options are > > supported and there needs to be preferrably non-default gcc configure > > option to request it. > > > > Aha, I see. Then perhaps an easier and more portable solution for > improving the reproducibility would be to make it optional whether or > not to include the archives when calculating the checksums. > > Or perhaps by checksumming the containing object files instead of the > archives themselves ? > > Would something like that be acceptable ? At SUSE we are carrying patches to not include the checksum at all but instead use the linker generated build-id as checksum for PCH. I suppose when we add the configure option to disable PCH support we could also elide checksum processing (or as in the patch simply always use all-zeros). Attached for reference. Richard. > > Jacob [-- Attachment #2: gcc9-reproducible-builds-buildid-for-checksum.patch --] [-- Type: text/x-patch, Size: 3597 bytes --] Use the binaries build-id as checksum for PCH purposes. diff --git a/gcc/c-family/c-pch.c b/gcc/c-family/c-pch.c index 9c0bd0b631d..de762517fc3 100644 --- a/gcc/c-family/c-pch.c +++ b/gcc/c-family/c-pch.c @@ -65,6 +65,66 @@ static FILE *pch_outfile; static const char *get_ident (void); +#if _GNU_SOURCE +#include <link.h> + +#define ALIGN(val, align) (((val) + (align) - 1) & ~((align) - 1)) + +static int +get_build_id_1 (struct dl_phdr_info *info, size_t, void *data) +{ + for (unsigned i = 0; i < info->dlpi_phnum; ++i) + { + if (info->dlpi_phdr[i].p_type != PT_NOTE) + continue; + ElfW(Nhdr) *nhdr + = (ElfW(Nhdr) *)(info->dlpi_addr + info->dlpi_phdr[i].p_vaddr); + ptrdiff_t size = info->dlpi_phdr[i].p_filesz; + ptrdiff_t align = info->dlpi_phdr[i].p_align; + if (align != 8) + align = 4; + while (size >= (ptrdiff_t)sizeof (ElfW(Nhdr))) + { + if (nhdr->n_type == NT_GNU_BUILD_ID + && nhdr->n_namesz == 4 + && strncmp ((char *)nhdr + + sizeof (ElfW(Nhdr)), + "GNU", 4) == 0 + && nhdr->n_descsz >= 16) + { + memcpy (data, + (char *)nhdr + + ALIGN (sizeof (ElfW(Nhdr)) + + nhdr->n_namesz, align), 16); + return 1; + } + size_t offset = (ALIGN (sizeof (ElfW(Nhdr)) + + nhdr->n_namesz, align) + + ALIGN(nhdr->n_descsz, align)); + nhdr = (ElfW(Nhdr) *)((char *)nhdr + offset); + size -= offset; + } + } + + return 0; +} + +static const unsigned char * +get_build_id () +{ + static unsigned char build_id[16]; + if (!dl_iterate_phdr (get_build_id_1, build_id)) + return NULL; + return build_id; +} +#else +static const unsigned char * +get_build_id () +{ + return NULL; +} +#endif + /* Compute an appropriate 8-byte magic number for the PCH file, so that utilities like file(1) can identify it, and so that GCC can quickly ignore non-PCH files and PCH files that are of a completely different @@ -120,8 +180,11 @@ pch_init (void) v.pch_init = &pch_init; target_validity = targetm.get_pch_validity (&v.target_data_length); + const unsigned char *chksum = get_build_id (); + if (!chksum) + chksum = executable_checksum; if (fwrite (partial_pch, IDENT_LENGTH, 1, f) != 1 - || fwrite (executable_checksum, 16, 1, f) != 1 + || fwrite (chksum, 16, 1, f) != 1 || fwrite (&v, sizeof (v), 1, f) != 1 || fwrite (target_validity, v.target_data_length, 1, f) != 1) fatal_error (input_location, "cannot write to %s: %m", pch_file); @@ -232,7 +295,10 @@ c_common_valid_pch (cpp_reader *pfile, const char *name, int fd) cpp_warning (pfile, CPP_W_INVALID_PCH, "%s: not a PCH file", name); return 2; } - if (memcmp (ident + IDENT_LENGTH, executable_checksum, 16) != 0) + const unsigned char *chksum = get_build_id (); + if (!chksum) + chksum = executable_checksum; + if (memcmp (ident + IDENT_LENGTH, chksum, 16) != 0) { cpp_warning (pfile, CPP_W_INVALID_PCH, "%s: created by a different GCC executable", name); diff --git a/gcc/genchecksum.c b/gcc/genchecksum.c index 09fbb63fa93..ec8b3281d53 100644 --- a/gcc/genchecksum.c +++ b/gcc/genchecksum.c @@ -113,8 +113,13 @@ main (int argc, char ** argv) puts ("#include \"config.h\""); puts ("#include \"system.h\""); fputs ("EXPORTED_CONST unsigned char executable_checksum[16] = { ", stdout); +#if _GNU_SOURCE + for (i = 0; i < 16; i++) + printf ("0x%02x%s", 0, i == 15 ? " };\n" : ", "); +#else for (i = 0; i < 16; i++) printf ("0x%02x%s", result[i], i == 15 ? " };\n" : ", "); +#endif return 0; } ^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2021-11-22 8:52 UTC | newest] Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2021-11-20 8:17 [RFC PATCH] gcc: Improve reproducability when building cc1/cc1plus Jacob Kroon 2021-11-20 8:24 ` Andrew Pinski 2021-11-20 8:32 ` Jakub Jelinek 2021-11-20 8:42 ` Jacob Kroon 2021-11-22 8:51 ` Richard Biener
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).