From: Kito Cheng <kito.cheng@gmail.com>
To: 廖仕华 <shihua@iscas.ac.cn>
Cc: GCC Patches <gcc-patches@gcc.gnu.org>,
Philipp Tomsich <philipp.tomsich@vrull.eu>,
jiawei <jiawei@iscas.ac.cn>
Subject: Re: [PATCH] RISC-V:Add support for ZMMUL extension
Date: Tue, 1 Mar 2022 21:59:47 +0800 [thread overview]
Message-ID: <CA+yXCZAgUg2FY5tErGbFnFK+QB1eJtnZQM+Rqyj3X2gkzWiQNg@mail.gmail.com> (raw)
In-Reply-To: <20220214022554.1590-1-shihua@iscas.ac.cn>
LGTM for GCC 13, I'll commit that once stage 1 is open again.
On Mon, Feb 14, 2022 at 10:26 AM <shihua@iscas.ac.cn> wrote:
>
> From: LiaoShihua <shihua@iscas.ac.cn>
>
> ZMMUL extension is Multiply only extension for RISC-V.It implements the multiplication subset of the M extension.
> The encodings are identical to those of the corresponding M-extension instructions.
> When You both use M extension add ZMMUL extension, it will warning "-mdiv cannot use when the ZMMUL extension is present"
>
> gcc\ChangeLog:
>
> * common/config/riscv/riscv-common.cc:Add support for ZMMUL extension
> * config/riscv/riscv-opts.h (MASK_ZMMUL):Likewise
> (TARGET_ZMMUL):Likewise
> * config/riscv/riscv.cc (riscv_option_override):Likewise
> * config/riscv/riscv.md:Likewise
> * config/riscv/riscv.opt:Likewise
> ---
> gcc/common/config/riscv/riscv-common.cc | 3 +++
> gcc/config/riscv/riscv-opts.h | 3 +++
> gcc/config/riscv/riscv.cc | 4 +++-
> gcc/config/riscv/riscv.md | 28 ++++++++++++-------------
> gcc/config/riscv/riscv.opt | 3 +++
> 5 files changed, 26 insertions(+), 15 deletions(-)
>
> diff --git a/gcc/common/config/riscv/riscv-common.cc b/gcc/common/config/riscv/riscv-common.cc
> index a904893b9ed..fec6c25eb04 100644
> --- a/gcc/common/config/riscv/riscv-common.cc
> +++ b/gcc/common/config/riscv/riscv-common.cc
> @@ -185,6 +185,8 @@ static const struct riscv_ext_version riscv_ext_version_table[] =
> {"zvl32768b", ISA_SPEC_CLASS_NONE, 1, 0},
> {"zvl65536b", ISA_SPEC_CLASS_NONE, 1, 0},
>
> + {"zmmul", ISA_SPEC_CLASS_NONE, 0, 1},
> +
> /* Terminate the list. */
> {NULL, ISA_SPEC_CLASS_NONE, 0, 0}
> };
> @@ -1080,6 +1082,7 @@ static const riscv_ext_flag_table_t riscv_ext_flag_table[] =
> {"zvl32768b", &gcc_options::x_riscv_zvl_flags, MASK_ZVL32768B},
> {"zvl65536b", &gcc_options::x_riscv_zvl_flags, MASK_ZVL65536B},
>
> + {"zmmul", &gcc_options::x_riscv_zmmul_subext, MASK_ZMMUL},
>
> {NULL, NULL, 0}
> };
> diff --git a/gcc/config/riscv/riscv-opts.h b/gcc/config/riscv/riscv-opts.h
> index 929e4e3a7c5..47e25628635 100644
> --- a/gcc/config/riscv/riscv-opts.h
> +++ b/gcc/config/riscv/riscv-opts.h
> @@ -136,4 +136,7 @@ enum stack_protector_guard {
> #define TARGET_ZVL32768B ((riscv_zvl_flags & MASK_ZVL32768B) != 0)
> #define TARGET_ZVL65536B ((riscv_zvl_flags & MASK_ZVL65536B) != 0)
>
> +#define MASK_ZMMUL (1 << 0)
> +#define TARGET_ZMMUL ((riscv_zmmul_subext & MASK_ZMMUL) != 0)
> +
> #endif /* ! GCC_RISCV_OPTS_H */
> diff --git a/gcc/config/riscv/riscv.cc b/gcc/config/riscv/riscv.cc
> index 6885b4bbad2..bbd5c288da9 100644
> --- a/gcc/config/riscv/riscv.cc
> +++ b/gcc/config/riscv/riscv.cc
> @@ -4974,8 +4974,10 @@ riscv_option_override (void)
>
> /* The presence of the M extension implies that division instructions
> are present, so include them unless explicitly disabled. */
> - if (TARGET_MUL && (target_flags_explicit & MASK_DIV) == 0)
> + if (!TARGET_ZMMUL && TARGET_MUL && (target_flags_explicit & MASK_DIV) == 0)
> target_flags |= MASK_DIV;
> + else if(TARGET_ZMMUL && TARGET_MUL && (target_flags_explicit & MASK_DIV) == 0)
> + warning (0, "%<-mdiv%> cannot use when the %<ZMMUL%> extension is present");
> else if (!TARGET_MUL && TARGET_DIV)
> error ("%<-mdiv%> requires %<-march%> to subsume the %<M%> extension");
>
> diff --git a/gcc/config/riscv/riscv.md b/gcc/config/riscv/riscv.md
> index b3c5bce842a..6dee2fb681a 100644
> --- a/gcc/config/riscv/riscv.md
> +++ b/gcc/config/riscv/riscv.md
> @@ -756,7 +756,7 @@
> [(set (match_operand:SI 0 "register_operand" "=r")
> (mult:SI (match_operand:SI 1 "register_operand" " r")
> (match_operand:SI 2 "register_operand" " r")))]
> - "TARGET_MUL"
> + "TARGET_ZMMUL || TARGET_MUL"
> { return TARGET_64BIT ? "mulw\t%0,%1,%2" : "mul\t%0,%1,%2"; }
> [(set_attr "type" "imul")
> (set_attr "mode" "SI")])
> @@ -765,7 +765,7 @@
> [(set (match_operand:DI 0 "register_operand" "=r")
> (mult:DI (match_operand:DI 1 "register_operand" " r")
> (match_operand:DI 2 "register_operand" " r")))]
> - "TARGET_MUL && TARGET_64BIT"
> + "(TARGET_ZMMUL || TARGET_MUL) && TARGET_64BIT"
> "mul\t%0,%1,%2"
> [(set_attr "type" "imul")
> (set_attr "mode" "DI")])
> @@ -775,7 +775,7 @@
> (mult:GPR (match_operand:GPR 1 "register_operand" " r")
> (match_operand:GPR 2 "register_operand" " r")))
> (label_ref (match_operand 3 "" ""))]
> - "TARGET_MUL"
> + "TARGET_ZMMUL || TARGET_MUL"
> {
> if (TARGET_64BIT && <MODE>mode == SImode)
> {
> @@ -820,7 +820,7 @@
> (mult:GPR (match_operand:GPR 1 "register_operand" " r")
> (match_operand:GPR 2 "register_operand" " r")))
> (label_ref (match_operand 3 "" ""))]
> - "TARGET_MUL"
> + "TARGET_ZMMUL || TARGET_MUL"
> {
> if (TARGET_64BIT && <MODE>mode == SImode)
> {
> @@ -866,7 +866,7 @@
> (sign_extend:DI
> (mult:SI (match_operand:SI 1 "register_operand" " r")
> (match_operand:SI 2 "register_operand" " r"))))]
> - "TARGET_MUL && TARGET_64BIT"
> + "(TARGET_ZMMUL || TARGET_MUL) && TARGET_64BIT"
> "mulw\t%0,%1,%2"
> [(set_attr "type" "imul")
> (set_attr "mode" "SI")])
> @@ -877,7 +877,7 @@
> (match_operator:SI 3 "subreg_lowpart_operator"
> [(mult:DI (match_operand:DI 1 "register_operand" " r")
> (match_operand:DI 2 "register_operand" " r"))])))]
> - "TARGET_MUL && TARGET_64BIT"
> + "(TARGET_ZMMUL || TARGET_MUL) && TARGET_64BIT"
> "mulw\t%0,%1,%2"
> [(set_attr "type" "imul")
> (set_attr "mode" "SI")])
> @@ -895,7 +895,7 @@
> [(set (match_operand:TI 0 "register_operand")
> (mult:TI (any_extend:TI (match_operand:DI 1 "register_operand"))
> (any_extend:TI (match_operand:DI 2 "register_operand"))))]
> - "TARGET_MUL && TARGET_64BIT"
> + "(TARGET_ZMMUL || TARGET_MUL) && TARGET_64BIT"
> {
> rtx low = gen_reg_rtx (DImode);
> emit_insn (gen_muldi3 (low, operands[1], operands[2]));
> @@ -917,7 +917,7 @@
> (any_extend:TI
> (match_operand:DI 2 "register_operand" " r")))
> (const_int 64))))]
> - "TARGET_MUL && TARGET_64BIT"
> + "(TARGET_ZMMUL || TARGET_MUL) && TARGET_64BIT"
> "mulh<u>\t%0,%1,%2"
> [(set_attr "type" "imul")
> (set_attr "mode" "DI")])
> @@ -926,7 +926,7 @@
> [(set (match_operand:TI 0 "register_operand")
> (mult:TI (zero_extend:TI (match_operand:DI 1 "register_operand"))
> (sign_extend:TI (match_operand:DI 2 "register_operand"))))]
> - "TARGET_MUL && TARGET_64BIT"
> + "(TARGET_ZMMUL || TARGET_MUL) && TARGET_64BIT"
> {
> rtx low = gen_reg_rtx (DImode);
> emit_insn (gen_muldi3 (low, operands[1], operands[2]));
> @@ -948,7 +948,7 @@
> (sign_extend:TI
> (match_operand:DI 2 "register_operand" " r")))
> (const_int 64))))]
> - "TARGET_MUL && TARGET_64BIT"
> + "(TARGET_ZMMUL || TARGET_MUL) && TARGET_64BIT"
> "mulhsu\t%0,%2,%1"
> [(set_attr "type" "imul")
> (set_attr "mode" "DI")])
> @@ -959,7 +959,7 @@
> (match_operand:SI 1 "register_operand" " r"))
> (any_extend:DI
> (match_operand:SI 2 "register_operand" " r"))))]
> - "TARGET_MUL && !TARGET_64BIT"
> + "(TARGET_ZMMUL || TARGET_MUL) && !TARGET_64BIT"
> {
> rtx temp = gen_reg_rtx (SImode);
> emit_insn (gen_mulsi3 (temp, operands[1], operands[2]));
> @@ -978,7 +978,7 @@
> (any_extend:DI
> (match_operand:SI 2 "register_operand" " r")))
> (const_int 32))))]
> - "TARGET_MUL && !TARGET_64BIT"
> + "(TARGET_ZMMUL || TARGET_MUL) && !TARGET_64BIT"
> "mulh<u>\t%0,%1,%2"
> [(set_attr "type" "imul")
> (set_attr "mode" "SI")])
> @@ -990,7 +990,7 @@
> (match_operand:SI 1 "register_operand" " r"))
> (sign_extend:DI
> (match_operand:SI 2 "register_operand" " r"))))]
> - "TARGET_MUL && !TARGET_64BIT"
> + "(TARGET_ZMMUL || TARGET_MUL) && !TARGET_64BIT"
> {
> rtx temp = gen_reg_rtx (SImode);
> emit_insn (gen_mulsi3 (temp, operands[1], operands[2]));
> @@ -1009,7 +1009,7 @@
> (sign_extend:DI
> (match_operand:SI 2 "register_operand" " r")))
> (const_int 32))))]
> - "TARGET_MUL && !TARGET_64BIT"
> + "(TARGET_ZMMUL || TARGET_MUL) && !TARGET_64BIT"
> "mulhsu\t%0,%2,%1"
> [(set_attr "type" "imul")
> (set_attr "mode" "SI")])
> diff --git a/gcc/config/riscv/riscv.opt b/gcc/config/riscv/riscv.opt
> index 9fffc08220d..46f695b97d3 100644
> --- a/gcc/config/riscv/riscv.opt
> +++ b/gcc/config/riscv/riscv.opt
> @@ -209,6 +209,9 @@ int riscv_vector_eew_flags
> TargetVariable
> int riscv_zvl_flags
>
> +TargetVariable
> +int riscv_zmmul_subext
> +
> Enum
> Name(isa_spec_class) Type(enum riscv_isa_spec_class)
> Supported ISA specs (for use with the -misa-spec= option):
> --
> 2.31.1.windows.1
>
next prev parent reply other threads:[~2022-03-01 14:00 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-02-14 2:25 shihua
2022-03-01 13:59 ` Kito Cheng [this message]
2022-03-01 14:07 ` 廖仕华
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CA+yXCZAgUg2FY5tErGbFnFK+QB1eJtnZQM+Rqyj3X2gkzWiQNg@mail.gmail.com \
--to=kito.cheng@gmail.com \
--cc=gcc-patches@gcc.gnu.org \
--cc=jiawei@iscas.ac.cn \
--cc=philipp.tomsich@vrull.eu \
--cc=shihua@iscas.ac.cn \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).