From: Kito Cheng <kito.cheng@gmail.com>
To: pan2.li@intel.com
Cc: gcc-patches@gcc.gnu.org, juzhe.zhong@rivai.ai, yanzhang.wang@intel.com
Subject: Re: [PATCH v1] RISC-V: Support rounding mode for VFNMADD/VFNMACC autovec
Date: Fri, 25 Aug 2023 10:34:08 +0800 [thread overview]
Message-ID: <CA+yXCZCpTe9bqbVY3xGaH7XedEMzvqwwe6JGLbHtTKKRmB_W3g@mail.gmail.com> (raw)
In-Reply-To: <20230825014833.3971482-1-pan2.li@intel.com>
lgtm
On Fri, Aug 25, 2023 at 9:49 AM Pan Li via Gcc-patches
<gcc-patches@gcc.gnu.org> wrote:
>
> From: Pan Li <pan2.li@intel.com>
>
> There will be a case like below for intrinsic and autovec combination.
>
> vfadd RTZ <- intrinisc static rounding
> vfnmadd <- autovec/autovec-opt
>
> The autovec generated vfnmadd should take DYN mode, and the
> frm must be restored before the vfnmadd insn. This patch
> would like to fix this issue by:
>
> * Add the frm operand to the autovec/autovec-opt pattern.
> * Set the frm_mode attr to DYN.
>
> Thus, the frm flow when combine autovec and intrinsic should be.
>
> +------------
> | frrm a5
> | ...
> | fsrmi 4
> | vfadd <- intrinsic static rounding.
> | ...
> | fsrm a5
> | vfnmadd <- autovec/autovec-opt
> | ...
> +------------
>
> Signed-off-by: Pan Li <pan2.li@intel.com>
>
> gcc/ChangeLog:
>
> * config/riscv/autovec-opt.md: Add FRM_REGNUM to vfnmadd/vfnmacc.
> * config/riscv/autovec.md: Ditto.
>
> gcc/testsuite/ChangeLog:
>
> * gcc.target/riscv/rvv/base/float-point-frm-autovec-4.c: New test.
> ---
> gcc/config/riscv/autovec-opt.md | 38 ++++----
> gcc/config/riscv/autovec.md | 34 ++++---
> .../rvv/base/float-point-frm-autovec-4.c | 88 +++++++++++++++++++
> 3 files changed, 130 insertions(+), 30 deletions(-)
> create mode 100644 gcc/testsuite/gcc.target/riscv/rvv/base/float-point-frm-autovec-4.c
>
> diff --git a/gcc/config/riscv/autovec-opt.md b/gcc/config/riscv/autovec-opt.md
> index 54ca6df721c..2922f370a17 100644
> --- a/gcc/config/riscv/autovec-opt.md
> +++ b/gcc/config/riscv/autovec-opt.md
> @@ -655,14 +655,16 @@ (define_insn_and_split "*single_widen_fms<mode>"
> ;; vect__13.182_33 = .FNMS (vect__11.180_35, vect__8.176_40, vect__4.172_45);
> (define_insn_and_split "*double_widen_fnms<mode>"
> [(set (match_operand:VWEXTF 0 "register_operand")
> - (fma:VWEXTF
> - (neg:VWEXTF
> + (unspec:VWEXTF
> + [(fma:VWEXTF
> + (neg:VWEXTF
> + (float_extend:VWEXTF
> + (match_operand:<V_DOUBLE_TRUNC> 2 "register_operand")))
> (float_extend:VWEXTF
> - (match_operand:<V_DOUBLE_TRUNC> 2 "register_operand")))
> - (float_extend:VWEXTF
> - (match_operand:<V_DOUBLE_TRUNC> 3 "register_operand"))
> - (neg:VWEXTF
> - (match_operand:VWEXTF 1 "register_operand"))))]
> + (match_operand:<V_DOUBLE_TRUNC> 3 "register_operand"))
> + (neg:VWEXTF
> + (match_operand:VWEXTF 1 "register_operand")))
> + (reg:SI FRM_REGNUM)] UNSPEC_VFFMA))]
> "TARGET_VECTOR && can_create_pseudo_p ()"
> "#"
> "&& 1"
> @@ -673,18 +675,21 @@ (define_insn_and_split "*double_widen_fnms<mode>"
> DONE;
> }
> [(set_attr "type" "vfwmuladd")
> - (set_attr "mode" "<V_DOUBLE_TRUNC>")])
> + (set_attr "mode" "<V_DOUBLE_TRUNC>")
> + (set (attr "frm_mode") (symbol_ref "riscv_vector::FRM_DYN"))])
>
> ;; This helps to match ext + fnms.
> (define_insn_and_split "*single_widen_fnms<mode>"
> [(set (match_operand:VWEXTF 0 "register_operand")
> - (fma:VWEXTF
> - (neg:VWEXTF
> - (float_extend:VWEXTF
> - (match_operand:<V_DOUBLE_TRUNC> 2 "register_operand")))
> - (match_operand:VWEXTF 3 "register_operand")
> - (neg:VWEXTF
> - (match_operand:VWEXTF 1 "register_operand"))))]
> + (unspec:VWEXTF
> + [(fma:VWEXTF
> + (neg:VWEXTF
> + (float_extend:VWEXTF
> + (match_operand:<V_DOUBLE_TRUNC> 2 "register_operand")))
> + (match_operand:VWEXTF 3 "register_operand")
> + (neg:VWEXTF
> + (match_operand:VWEXTF 1 "register_operand")))
> + (reg:SI FRM_REGNUM)] UNSPEC_VFFMA))]
> "TARGET_VECTOR && can_create_pseudo_p ()"
> "#"
> "&& 1"
> @@ -701,4 +706,5 @@ (define_insn_and_split "*single_widen_fnms<mode>"
> DONE;
> }
> [(set_attr "type" "vfwmuladd")
> - (set_attr "mode" "<V_DOUBLE_TRUNC>")])
> + (set_attr "mode" "<V_DOUBLE_TRUNC>")
> + (set (attr "frm_mode") (symbol_ref "riscv_vector::FRM_DYN"))])
> diff --git a/gcc/config/riscv/autovec.md b/gcc/config/riscv/autovec.md
> index 28396c6175d..5f16ac53712 100644
> --- a/gcc/config/riscv/autovec.md
> +++ b/gcc/config/riscv/autovec.md
> @@ -1274,26 +1274,31 @@ (define_insn_and_split "*fms<VF:mode><P:mode>"
> (define_expand "fnms<mode>4"
> [(parallel
> [(set (match_operand:VF 0 "register_operand")
> - (fma:VF
> - (neg:VF
> - (match_operand:VF 1 "register_operand"))
> - (match_operand:VF 2 "register_operand")
> - (neg:VF
> - (match_operand:VF 3 "register_operand"))))
> + (unspec:VF
> + [(fma:VF
> + (neg:VF
> + (match_operand:VF 1 "register_operand"))
> + (match_operand:VF 2 "register_operand")
> + (neg:VF
> + (match_operand:VF 3 "register_operand")))
> + (reg:SI FRM_REGNUM)] UNSPEC_VFFMA))
> (clobber (match_dup 4))])]
> "TARGET_VECTOR"
> {
> operands[4] = gen_reg_rtx (Pmode);
> - })
> + }
> + [(set (attr "frm_mode") (symbol_ref "riscv_vector::FRM_DYN"))])
>
> (define_insn_and_split "*fnms<VF:mode><P:mode>"
> [(set (match_operand:VF 0 "register_operand" "=vr, vr, ?&vr")
> - (fma:VF
> - (neg:VF
> - (match_operand:VF 1 "register_operand" " %0, vr, vr"))
> - (match_operand:VF 2 "register_operand" " vr, vr, vr")
> - (neg:VF
> - (match_operand:VF 3 "register_operand" " vr, 0, vr"))))
> + (unspec:VF
> + [(fma:VF
> + (neg:VF
> + (match_operand:VF 1 "register_operand" " %0, vr, vr"))
> + (match_operand:VF 2 "register_operand" " vr, vr, vr")
> + (neg:VF
> + (match_operand:VF 3 "register_operand" " vr, 0, vr")))
> + (reg:SI FRM_REGNUM)] UNSPEC_VFFMA))
> (clobber (match_operand:P 4 "register_operand" "=r,r,r"))]
> "TARGET_VECTOR"
> "#"
> @@ -1307,7 +1312,8 @@ (define_insn_and_split "*fnms<VF:mode><P:mode>"
> DONE;
> }
> [(set_attr "type" "vfmuladd")
> - (set_attr "mode" "<VF:MODE>")])
> + (set_attr "mode" "<VF:MODE>")
> + (set (attr "frm_mode") (symbol_ref "riscv_vector::FRM_DYN"))])
>
> ;; =========================================================================
> ;; == SELECT_VL
> diff --git a/gcc/testsuite/gcc.target/riscv/rvv/base/float-point-frm-autovec-4.c b/gcc/testsuite/gcc.target/riscv/rvv/base/float-point-frm-autovec-4.c
> new file mode 100644
> index 00000000000..2cc4e0ae38e
> --- /dev/null
> +++ b/gcc/testsuite/gcc.target/riscv/rvv/base/float-point-frm-autovec-4.c
> @@ -0,0 +1,88 @@
> +/* { dg-do compile } */
> +/* { dg-options "-march=rv64gcv --param=riscv-autovec-preference=fixed-vlmax -ffast-math -mabi=lp64 -O3 -Wno-psabi" } */
> +/* { dg-final { check-function-bodies "**" "" } } */
> +
> +#include "riscv_vector.h"
> +
> +/*
> +**test_1:
> +** ...
> +** frrm\t[axt][0-9]+
> +** ...
> +** fsrmi\t1
> +** ...
> +** vfadd\.vv\tv[0-9]+,v[0-9]+,v[0-9]+
> +** ...
> +** fsrm\t[axt][0-9]+
> +** ...
> +** vfnmadd\.vv\tv[0-9]+,v[0-9]+,v[0-9]+
> +** ...
> +** ret
> +*/
> +void
> +test_1 (vfloat32m1_t op1, vfloat32m1_t op2, vfloat32m1_t *op_out, size_t vl,
> + double *in1, double *in2, double *out)
> +{
> + *op_out = __riscv_vfadd_vv_f32m1_rm (op1, op2, 1, vl);
> +
> + for (int i = 0; i < vl; ++i)
> + out[i] = - in1[i] * in2[i] - out[i];
> +}
> +
> +/*
> +**test_2:
> +** ...
> +** frrm\t[axt][0-9]+
> +** ...
> +** fsrmi\t1
> +** ...
> +** vfadd\.vv\tv[0-9]+,v[0-9]+,v[0-9]+
> +** ...
> +** fsrm\t[axt][0-9]+
> +** ...
> +** vfnmadd\.vv\tv[0-9]+,v[0-9]+,v[0-9]+
> +** ...
> +** fsrmi\t4
> +** ...
> +** vfadd\.vv\tv[0-9]+,v[0-9]+,v[0-9]+
> +** ...
> +** fsrm\t[axt][0-9]+
> +** ...
> +** ret
> +*/
> +void
> +test_2 (vfloat32m1_t op1, vfloat32m1_t op2, vfloat32m1_t *op_out, size_t vl,
> + double *in1, double *in2, double *out)
> +{
> + op2 = __riscv_vfadd_vv_f32m1_rm (op1, op2, 1, vl);
> +
> + for (int i = 0; i < vl; ++i)
> + out[i] = - out[i] * in1[i] - in2[i];
> +
> + *op_out = __riscv_vfadd_vv_f32m1_rm (op1, op2, 4, vl);
> +}
> +
> +/*
> +**test_3:
> +** ...
> +** frrm\t[axt][0-9]+
> +** ...
> +** vfnmadd\.vv\tv[0-9]+,v[0-9]+,v[0-9]+
> +** ...
> +** fsrmi\t4
> +** ...
> +** vfadd\.vv\tv[0-9]+,v[0-9]+,v[0-9]+
> +** ...
> +** fsrm\t[axt][0-9]+
> +** ...
> +** ret
> +*/
> +void
> +test_3 (vfloat32m1_t op1, vfloat32m1_t op2, vfloat32m1_t *op_out, size_t vl,
> + double *in1, double *in2, double *in3, double *out)
> +{
> + for (int i = 0; i < vl; ++i)
> + out[i] = - in2[i] * out[i] - in1[i];
> +
> + *op_out = __riscv_vfadd_vv_f32m1_rm (op1, op2, 4, vl);
> +}
> --
> 2.34.1
>
prev parent reply other threads:[~2023-08-25 2:34 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-08-25 1:48 pan2.li
2023-08-25 2:34 ` Kito Cheng [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CA+yXCZCpTe9bqbVY3xGaH7XedEMzvqwwe6JGLbHtTKKRmB_W3g@mail.gmail.com \
--to=kito.cheng@gmail.com \
--cc=gcc-patches@gcc.gnu.org \
--cc=juzhe.zhong@rivai.ai \
--cc=pan2.li@intel.com \
--cc=yanzhang.wang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).