From: Richard Biener <richard.guenther@gmail.com>
To: "Kewen.Lin" <linkw@linux.ibm.com>
Cc: GCC Patches <gcc-patches@gcc.gnu.org>,
Richard Sandiford <richard.sandiford@arm.com>,
"Andre Vieira (lists)" <andre.simoesdiasvieira@arm.com>,
Peter Bergner <bergner@linux.ibm.com>,
Segher Boessenkool <segher@kernel.crashing.org>
Subject: Re: vect: Fix wrong shift_n after widening on BE [PR107338]
Date: Mon, 24 Oct 2022 14:55:25 +0200 [thread overview]
Message-ID: <CAFiYyc3H-NSHQAqP-mODuzBOHD1bp1CuzGvPDPXNMwZ0F2r2Vg@mail.gmail.com> (raw)
In-Reply-To: <95d598d7-4f00-ad36-08f9-4b5942e48e42@linux.ibm.com>
On Mon, Oct 24, 2022 at 12:43 PM Kewen.Lin <linkw@linux.ibm.com> wrote:
>
> Hi,
>
> As PR107338 shows, with the use of widening loads, the
> container_type can become a wider type, it causes us to
> get wrong shift_n since the BIT_FIELD_REF offset actually
> becomes bigger on BE. Taking the case in PR107338 as
> example, at the beginning the container type is short and
> BIT_FIELD_REF offset is 8 and size is 4, with unpacking to
> wider type int, the high 16 bits are zero, by viewing it
> as type int, its offset actually becomes to 24. So the
> shift_n should be 4 (32 - 24 - 4) instead of 20 (32 - 8
> - 4).
>
> I noticed that if we move shift_n calculation early
> before the adjustments for widening loads (container type
> change), it's based on all the stuffs of the original
> container, the shfit_n calculated there is exactly what
> we want, it can be independent of widening. Besides, I
> add prec adjustment together with the current adjustments
> for widening loads, although prec's subsequent uses don't
> require this change for now, since the container type gets
> changed, we should keep the corresponding prec consistent.
>
> Bootstrapped and regtested on x86_64-redhat-linux,
> aarch64-linux-gnu, powerpc64-linux-gnu P7 and P8 and
> powerpc64le-linux-gnu P9 and P10.
>
> Is it ok for trunk?
OK.
Richard.
> BR,
> Kewen
> -----
>
> PR tree-optimization/107338
>
> gcc/ChangeLog:
>
> * tree-vect-patterns.cc (vect_recog_bitfield_ref_pattern): Move
> shfit_n calculation before the adjustments for widening loads.
> ---
> gcc/tree-vect-patterns.cc | 17 +++++++++++------
> 1 file changed, 11 insertions(+), 6 deletions(-)
>
> diff --git a/gcc/tree-vect-patterns.cc b/gcc/tree-vect-patterns.cc
> index 777ba2f5903..01094e8cb86 100644
> --- a/gcc/tree-vect-patterns.cc
> +++ b/gcc/tree-vect-patterns.cc
> @@ -1925,6 +1925,16 @@ vect_recog_bitfield_ref_pattern (vec_info *vinfo, stmt_vec_info stmt_info,
> tree container_type = TREE_TYPE (container);
> tree vectype = get_vectype_for_scalar_type (vinfo, container_type);
>
> + /* Calculate shift_n before the adjustments for widening loads, otherwise
> + the container may change and we have to consider offset change for
> + widening loads on big endianness. The shift_n calculated here can be
> + independent of widening. */
> + unsigned HOST_WIDE_INT shift_n = bit_field_offset (bf_ref).to_constant ();
> + unsigned HOST_WIDE_INT mask_width = bit_field_size (bf_ref).to_constant ();
> + unsigned HOST_WIDE_INT prec = tree_to_uhwi (TYPE_SIZE (container_type));
> + if (BYTES_BIG_ENDIAN)
> + shift_n = prec - shift_n - mask_width;
> +
> /* We move the conversion earlier if the loaded type is smaller than the
> return type to enable the use of widening loads. */
> if (TYPE_PRECISION (TREE_TYPE (container)) < TYPE_PRECISION (ret_type)
> @@ -1935,6 +1945,7 @@ vect_recog_bitfield_ref_pattern (vec_info *vinfo, stmt_vec_info stmt_info,
> NOP_EXPR, container);
> container = gimple_get_lhs (pattern_stmt);
> container_type = TREE_TYPE (container);
> + prec = tree_to_uhwi (TYPE_SIZE (container_type));
> vectype = get_vectype_for_scalar_type (vinfo, container_type);
> append_pattern_def_seq (vinfo, stmt_info, pattern_stmt, vectype);
> }
> @@ -1953,12 +1964,6 @@ vect_recog_bitfield_ref_pattern (vec_info *vinfo, stmt_vec_info stmt_info,
> shift_first = false;
> }
>
> - unsigned HOST_WIDE_INT shift_n = bit_field_offset (bf_ref).to_constant ();
> - unsigned HOST_WIDE_INT mask_width = bit_field_size (bf_ref).to_constant ();
> - unsigned HOST_WIDE_INT prec = tree_to_uhwi (TYPE_SIZE (container_type));
> - if (BYTES_BIG_ENDIAN)
> - shift_n = prec - shift_n - mask_width;
> -
> /* If we don't have to shift we only generate the mask, so just fix the
> code-path to shift_first. */
> if (shift_n == 0)
> --
> 2.35.4
next prev parent reply other threads:[~2022-10-24 12:55 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-10-24 10:43 Kewen.Lin
2022-10-24 12:55 ` Richard Biener [this message]
2022-10-25 5:28 ` Kewen.Lin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CAFiYyc3H-NSHQAqP-mODuzBOHD1bp1CuzGvPDPXNMwZ0F2r2Vg@mail.gmail.com \
--to=richard.guenther@gmail.com \
--cc=andre.simoesdiasvieira@arm.com \
--cc=bergner@linux.ibm.com \
--cc=gcc-patches@gcc.gnu.org \
--cc=linkw@linux.ibm.com \
--cc=richard.sandiford@arm.com \
--cc=segher@kernel.crashing.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).