From: Richard Biener <richard.guenther@gmail.com>
To: Tamar Christina <tamar.christina@arm.com>
Cc: GCC Patches <gcc-patches@gcc.gnu.org>, nd <nd@arm.com>,
Richard Guenther <rguenther@suse.de>
Subject: Re: [1/3 PATCH]middle-end vect: Simplify and extend the complex numbers validation routines.
Date: Mon, 10 Jan 2022 14:00:18 +0100 [thread overview]
Message-ID: <CAFiYyc3zjSp=WtV9MhckoTSTQRutdgBHJvRfpAW=tiJpqfhUOg@mail.gmail.com> (raw)
In-Reply-To: <patch-15145-tamar@arm.com>
On Fri, Dec 17, 2021 at 4:44 PM Tamar Christina via Gcc-patches
<gcc-patches@gcc.gnu.org> wrote:
>
> Hi All,
>
> This patch boosts the analysis for complex mul,fma and fms in order to ensure
> that it doesn't create an incorrect output.
>
> Essentially it adds an extra verification to check that the two nodes it's going
> to combine do the same operations on compatible values. The reason it needs to
> do this is that if one computation differs from the other then with the current
> implementation we have no way to deal with it since we have to remove the
> permute.
>
> When we can keep the permute around we can probably handle these by unrolling.
>
> While implementing this since I have to do the traversal anyway I took advantage
> of it by simplifying the code a bit. Previously we would determine whether
> something is a conjugate and then try to figure out which conjugate it is and
> then try to see if the permutes match what we expect.
>
> Now the code that does the traversal will detect this in one go and return to us
> whether the operation is something that can be combined and whether a conjugate
> is present.
>
> Secondly because it does this I can now simplify the checking code itself to
> essentially just try to apply fixed patterns to each operation.
>
> The patterns represent the order operations should appear in. For instance a
> complex MUL operation combines :
>
> Left 1 + Right 1
> Left 2 + Right 2
>
> with a permute on the nodes consisting of:
>
> { Even, Even } + { Odd, Odd }
> { Even, Odd } + { Odd, Even }
>
> By abstracting over these patterns the checking code becomes quite simple.
>
> As part of this I was checking the order of the operands which was left in
> "slp" order. as in, the same order they showed up in during SLP, which means
> that the accumulator is first. However it looks like I didn't document this
> and the x86 optab was implemented assuming the same order as FMA, i.e. that
> the accumulator is last.
>
> I have this changed the order to match that of FMA and FMS which corrects the
> x86 codegen and will update the Arm targets. This has now also been
> documented.
>
> Bootstrapped Regtested on aarch64-none-linux-gnu,
> x86_64-pc-linux-gnu and no regressions.
>
> Ok for master? and backport to GCC 11 after some stew?
>
> Thanks,
> Tamar
>
> gcc/ChangeLog:
>
> PR tree-optimization/102819
> PR tree-optimization/103169
> * doc/md.texi: Update docs for cfms, cfma.
> * tree-data-ref.h (same_data_refs): Accept optional offset.
> * tree-vect-slp-patterns.c (is_linear_load_p): Fix issue with repeating
> patterns.
> (vect_normalize_conj_loc): Remove.
> (is_eq_or_top): Change to take two nodes.
> (enum _conj_status, compatible_complex_nodes_p,
> vect_validate_multiplication): New.
> (class complex_add_pattern, complex_add_pattern::matches,
> complex_add_pattern::recognize, class complex_mul_pattern,
> complex_mul_pattern::recognize, class complex_fms_pattern,
> complex_fms_pattern::recognize, class complex_operations_pattern,
> complex_operations_pattern::recognize, addsub_pattern::recognize): Pass
> new cache.
> (complex_fms_pattern::matches, complex_mul_pattern::matches): Pass new
> cache and use new validation code.
> * tree-vect-slp.c (vect_match_slp_patterns_2, vect_match_slp_patterns,
> vect_analyze_slp): Pass along cache.
> (compatible_calls_p): Expose.
> * tree-vectorizer.h (compatible_calls_p, slp_node_hash,
> slp_compat_nodes_map_t): New.
> (class vect_pattern): Update signatures include new cache.
>
> gcc/testsuite/ChangeLog:
>
> PR tree-optimization/102819
> PR tree-optimization/103169
> * g++.dg/vect/pr99149.cc: xfail for now.
> * gcc.dg/vect/complex/pr102819-1.c: New test.
> * gcc.dg/vect/complex/pr102819-2.c: New test.
> * gcc.dg/vect/complex/pr102819-3.c: New test.
> * gcc.dg/vect/complex/pr102819-4.c: New test.
> * gcc.dg/vect/complex/pr102819-5.c: New test.
> * gcc.dg/vect/complex/pr102819-6.c: New test.
> * gcc.dg/vect/complex/pr102819-7.c: New test.
> * gcc.dg/vect/complex/pr102819-8.c: New test.
> * gcc.dg/vect/complex/pr102819-9.c: New test.
> * gcc.dg/vect/complex/pr103169.c: New test.
>
> --- inline copy of patch --
> diff --git a/gcc/doc/md.texi b/gcc/doc/md.texi
> index 9ec051e94e10cca9eec2773e1b8c01b74b6ea4db..60dc5b3ea6087c2824ad1467bc66e9cfebe9dcfc 100644
> --- a/gcc/doc/md.texi
> +++ b/gcc/doc/md.texi
> @@ -6325,12 +6325,12 @@ Perform a vector multiply and accumulate that is semantically the same as
> a multiply and accumulate of complex numbers.
>
> @smallexample
> - complex TYPE c[N];
> - complex TYPE a[N];
> - complex TYPE b[N];
> + complex TYPE op0[N];
> + complex TYPE op1[N];
> + complex TYPE op2[N];
> for (int i = 0; i < N; i += 1)
> @{
> - c[i] += a[i] * b[i];
> + op2[i] += op1[i] * op2[i];
> @}
> @end smallexample
>
> @@ -6348,12 +6348,12 @@ the same as a multiply and accumulate of complex numbers where the second
> multiply arguments is conjugated.
>
> @smallexample
> - complex TYPE c[N];
> - complex TYPE a[N];
> - complex TYPE b[N];
> + complex TYPE op0[N];
> + complex TYPE op1[N];
> + complex TYPE op2[N];
> for (int i = 0; i < N; i += 1)
> @{
> - c[i] += a[i] * conj (b[i]);
> + op2[i] += op0[i] * conj (op1[i]);
> @}
> @end smallexample
>
> @@ -6370,12 +6370,12 @@ Perform a vector multiply and subtract that is semantically the same as
> a multiply and subtract of complex numbers.
>
> @smallexample
> - complex TYPE c[N];
> - complex TYPE a[N];
> - complex TYPE b[N];
> + complex TYPE op0[N];
> + complex TYPE op1[N];
> + complex TYPE op2[N];
> for (int i = 0; i < N; i += 1)
> @{
> - c[i] -= a[i] * b[i];
> + op2[i] -= op0[i] * op1[i];
> @}
> @end smallexample
>
> @@ -6393,12 +6393,12 @@ the same as a multiply and subtract of complex numbers where the second
> multiply arguments is conjugated.
>
> @smallexample
> - complex TYPE c[N];
> - complex TYPE a[N];
> - complex TYPE b[N];
> + complex TYPE op0[N];
> + complex TYPE op1[N];
> + complex TYPE op2[N];
> for (int i = 0; i < N; i += 1)
> @{
> - c[i] -= a[i] * conj (b[i]);
> + op2[i] -= op0[i] * conj (op1[i]);
> @}
> @end smallexample
>
> @@ -6415,12 +6415,12 @@ Perform a vector multiply that is semantically the same as multiply of
> complex numbers.
>
> @smallexample
> - complex TYPE c[N];
> - complex TYPE a[N];
> - complex TYPE b[N];
> + complex TYPE op0[N];
> + complex TYPE op1[N];
> + complex TYPE op2[N];
> for (int i = 0; i < N; i += 1)
> @{
> - c[i] = a[i] * b[i];
> + op2[i] = op0[i] * op1[i];
> @}
> @end smallexample
>
> @@ -6437,12 +6437,12 @@ Perform a vector multiply by conjugate that is semantically the same as a
> multiply of complex numbers where the second multiply arguments is conjugated.
>
> @smallexample
> - complex TYPE c[N];
> - complex TYPE a[N];
> - complex TYPE b[N];
> + complex TYPE op0[N];
> + complex TYPE op1[N];
> + complex TYPE op2[N];
> for (int i = 0; i < N; i += 1)
> @{
> - c[i] = a[i] * conj (b[i]);
> + op2[i] = op0[i] * conj (op1[i]);
> @}
> @end smallexample
>
> diff --git a/gcc/testsuite/g++.dg/vect/pr99149.cc b/gcc/testsuite/g++.dg/vect/pr99149.cc
> index e6e0594a336fa053ffba64a12e2de43a4e373f49..bb9f5fa89f12b184368bf5488d6e9432c2166463 100755
> --- a/gcc/testsuite/g++.dg/vect/pr99149.cc
> +++ b/gcc/testsuite/g++.dg/vect/pr99149.cc
> @@ -24,4 +24,4 @@ public:
> } n;
> main() { n.j(); }
>
> -/* { dg-final { scan-tree-dump-times "stmt.*COMPLEX_MUL" 1 "slp2" } } */
> +/* { dg-final { scan-tree-dump-times "stmt.*COMPLEX_MUL" 1 "slp2" { xfail { vect_float } } } } */
> diff --git a/gcc/testsuite/gcc.dg/vect/complex/pr102819-1.c b/gcc/testsuite/gcc.dg/vect/complex/pr102819-1.c
> new file mode 100644
> index 0000000000000000000000000000000000000000..46b9a55f05279d732fa1418e02f779cf693ede07
> --- /dev/null
> +++ b/gcc/testsuite/gcc.dg/vect/complex/pr102819-1.c
> @@ -0,0 +1,20 @@
> +/* { dg-do compile } */
> +/* { dg-add-options arm_v8_3a_complex_neon } */
> +
> +float f[12][100];
> +
> +void bad1(float v1, float v2)
> +{
> + for (int r = 0; r < 100; r += 4)
> + {
> + int i = r + 1;
> + f[0][r] = f[1][r] * (f[2][r] + v2) - f[1][i] * (f[2][i] + v1);
> + f[0][i] = f[1][r] * (f[2][i] + v1) + f[1][i] * (f[2][r] + v2);
> + f[0][r+2] = f[1][r+2] * (f[2][r+2] + v2) - f[1][i+2] * (f[2][i+2] + v1);
> + f[0][i+2] = f[1][r+2] * (f[2][i+2] + v1) + f[1][i+2] * (f[2][r+2] + v2);
> + // ^^^^^^^ ^^^^^^^
> + }
> +}
> +
> +/* { dg-final { scan-tree-dump "Found COMPLEX_MUL" "vect" { target { vect_float } } } } */
> +
> diff --git a/gcc/testsuite/gcc.dg/vect/complex/pr102819-2.c b/gcc/testsuite/gcc.dg/vect/complex/pr102819-2.c
> new file mode 100644
> index 0000000000000000000000000000000000000000..ffe646efe57f7ad07541b0fb96601596f46dc5f8
> --- /dev/null
> +++ b/gcc/testsuite/gcc.dg/vect/complex/pr102819-2.c
> @@ -0,0 +1,17 @@
> +/* { dg-do compile } */
> +/* { dg-add-options arm_v8_3a_complex_neon } */
> +
> +float f[12][100];
> +
> +void bad1(float v1, float v2)
> +{
> + for (int r = 0; r < 100; r += 2)
> + {
> + int i = r + 1;
> + f[0][r] = f[1][r] * (f[2][r] + v1) - f[1][i] * (f[2][i] + v2);
> + f[0][i] = f[1][r] * (f[2][i] + v1) + f[1][i] * (f[2][r] + v2);
> + }
> +}
> +
> +/* { dg-final { scan-tree-dump-not "Found COMPLEX_MUL" "vect" { target { vect_float } } } } */
> +
> diff --git a/gcc/testsuite/gcc.dg/vect/complex/pr102819-3.c b/gcc/testsuite/gcc.dg/vect/complex/pr102819-3.c
> new file mode 100644
> index 0000000000000000000000000000000000000000..5f98aa204d8b11b0cb433f8965dbb72cf8940de1
> --- /dev/null
> +++ b/gcc/testsuite/gcc.dg/vect/complex/pr102819-3.c
> @@ -0,0 +1,17 @@
> +/* { dg-do compile } */
> +/* { dg-add-options arm_v8_3a_complex_neon } */
> +
> +float f[12][100];
> +
> +void good1(float v1, float v2)
> +{
> + for (int r = 0; r < 100; r += 2)
> + {
> + int i = r + 1;
> + f[0][r] = f[1][r] * (f[2][r] + v2) - f[1][i] * (f[2][i] + v1);
> + f[0][i] = f[1][r] * (f[2][i] + v1) + f[1][i] * (f[2][r] + v2);
> + }
> +}
> +
> +/* { dg-final { scan-tree-dump "Found COMPLEX_MUL" "vect" { target { vect_float } } } } */
> +
> diff --git a/gcc/testsuite/gcc.dg/vect/complex/pr102819-4.c b/gcc/testsuite/gcc.dg/vect/complex/pr102819-4.c
> new file mode 100644
> index 0000000000000000000000000000000000000000..882851789c5085e734000609114be480d3b08bd0
> --- /dev/null
> +++ b/gcc/testsuite/gcc.dg/vect/complex/pr102819-4.c
> @@ -0,0 +1,17 @@
> +/* { dg-do compile } */
> +/* { dg-add-options arm_v8_3a_complex_neon } */
> +
> +float f[12][100];
> +
> +void good1()
> +{
> + for (int r = 0; r < 100; r += 2)
> + {
> + int i = r + 1;
> + f[0][r] = f[1][r] * f[2][r] - f[1][i] * f[2][i];
> + f[0][i] = f[1][r] * f[2][i] + f[1][i] * f[2][r];
> + }
> +}
> +
> +/* { dg-final { scan-tree-dump "Found COMPLEX_MUL" "vect" { target { vect_float } } } } */
> +
> diff --git a/gcc/testsuite/gcc.dg/vect/complex/pr102819-5.c b/gcc/testsuite/gcc.dg/vect/complex/pr102819-5.c
> new file mode 100644
> index 0000000000000000000000000000000000000000..6a2d549d65f3f27d407fb0bd469473e6a5c333ae
> --- /dev/null
> +++ b/gcc/testsuite/gcc.dg/vect/complex/pr102819-5.c
> @@ -0,0 +1,17 @@
> +/* { dg-do compile } */
> +/* { dg-add-options arm_v8_3a_complex_neon } */
> +
> +float f[12][100];
> +
> +void good2()
> +{
> + for (int r = 0; r < 100; r += 2)
> + {
> + int i = r + 1;
> + f[0][r] = f[1][r] * (f[2][r] + 1) - f[1][i] * (f[2][i] + 1);
> + f[0][i] = f[1][r] * (f[2][i] + 1) + f[1][i] * (f[2][r] + 1);
> + }
> +}
> +
> +/* { dg-final { scan-tree-dump "Found COMPLEX_MUL" "vect" { target { vect_float } } } } */
> +
> diff --git a/gcc/testsuite/gcc.dg/vect/complex/pr102819-6.c b/gcc/testsuite/gcc.dg/vect/complex/pr102819-6.c
> new file mode 100644
> index 0000000000000000000000000000000000000000..71e66dbe3b29eec1fffb8df9b216022fdc0af54e
> --- /dev/null
> +++ b/gcc/testsuite/gcc.dg/vect/complex/pr102819-6.c
> @@ -0,0 +1,18 @@
> +/* { dg-do compile } */
> +/* { dg-add-options arm_v8_3a_complex_neon } */
> +
> +float f[12][100];
> +
> +void bad1()
> +{
> + for (int r = 0; r < 100; r += 2)
> + {
> + int i = r + 1;
> + f[0][r] = f[1][r] * f[2][r] - f[1][i] * f[3][i];
> + f[0][i] = f[1][r] * f[2][i] + f[1][i] * f[3][r];
> + // ^^^^^^^ ^^^^^^^
> + }
> +}
> +
> +/* { dg-final { scan-tree-dump-not "Found COMPLEX_MUL" "vect" { target { vect_float } } } } */
> +
> diff --git a/gcc/testsuite/gcc.dg/vect/complex/pr102819-7.c b/gcc/testsuite/gcc.dg/vect/complex/pr102819-7.c
> new file mode 100644
> index 0000000000000000000000000000000000000000..536672f3c8bb474ad5fa4bb61b3a36b555acf3cf
> --- /dev/null
> +++ b/gcc/testsuite/gcc.dg/vect/complex/pr102819-7.c
> @@ -0,0 +1,18 @@
> +/* { dg-do compile } */
> +/* { dg-add-options arm_v8_3a_complex_neon } */
> +
> +float f[12][100];
> +
> +void bad2()
> +{
> + for (int r = 0; r < 100; r += 2)
> + {
> + int i = r + 1;
> + f[0][r] = f[1][r] * (f[2][r] + 1) - f[1][i] * f[2][i];
> + f[0][i] = f[1][r] * (f[2][i] + 1) + f[1][i] * f[2][r];
> + // ^^^^
> + }
> +}
> +
> +/* { dg-final { scan-tree-dump-not "Found COMPLEX_MUL" "vect" { target { vect_float } } } } */
> +
> diff --git a/gcc/testsuite/gcc.dg/vect/complex/pr102819-8.c b/gcc/testsuite/gcc.dg/vect/complex/pr102819-8.c
> new file mode 100644
> index 0000000000000000000000000000000000000000..07b48148688b7d530e5891d023d558b58a485c23
> --- /dev/null
> +++ b/gcc/testsuite/gcc.dg/vect/complex/pr102819-8.c
> @@ -0,0 +1,18 @@
> +/* { dg-do compile } */
> +/* { dg-add-options arm_v8_3a_complex_neon } */
> +
> +float f[12][100];
> +
> +void bad3()
> +{
> + for (int r = 0; r < 100; r += 2)
> + {
> + int i = r + 1;
> + f[0][r] = f[1][r] * f[2][r] - f[1][r] * f[2][i];
> + f[0][i] = f[1][r] * f[2][i] + f[1][i] * f[2][r];
> + // ^^^^^^^
> + }
> +}
> +
> +/* { dg-final { scan-tree-dump-not "Found COMPLEX_MUL" "vect" { target { vect_float } } } } */
> +
> diff --git a/gcc/testsuite/gcc.dg/vect/complex/pr102819-9.c b/gcc/testsuite/gcc.dg/vect/complex/pr102819-9.c
> new file mode 100644
> index 0000000000000000000000000000000000000000..7655852434b21b381fe7ee316e8caf3d485b8ee1
> --- /dev/null
> +++ b/gcc/testsuite/gcc.dg/vect/complex/pr102819-9.c
> @@ -0,0 +1,21 @@
> +/* { dg-do compile } */
> +/* { dg-add-options arm_v8_3a_complex_neon } */
> +
> +#include <stdio.h>
> +#include <complex.h>
> +
> +#define N 200
> +#define TYPE float
> +#define TYPE2 float
> +
> +void g (TYPE2 complex a[restrict N], TYPE complex b[restrict N], TYPE complex c[restrict N])
> +{
> + for (int i=0; i < N; i++)
> + {
> + c[i] -= a[i] * b[0];
> + }
> +}
> +
> +/* The pattern overlaps with COMPLEX_ADD so we need to support consuming ADDs in COMPLEX_FMS. */
> +
> +/* { dg-final { scan-tree-dump "Found COMPLEX_FMS" "vect" { xfail { vect_float } } } } */
> diff --git a/gcc/testsuite/gcc.dg/vect/complex/pr103169.c b/gcc/testsuite/gcc.dg/vect/complex/pr103169.c
> new file mode 100644
> index 0000000000000000000000000000000000000000..1bfabbd85a0eedfb4156a82574324126e9083fc5
> --- /dev/null
> +++ b/gcc/testsuite/gcc.dg/vect/complex/pr103169.c
> @@ -0,0 +1,12 @@
> +/* { dg-do compile { target { vect_double } } } */
> +/* { dg-add-options arm_v8_3a_complex_neon } */
> +/* { dg-additional-options "-O2 -fvect-cost-model=unlimited" } */
> +
> +_Complex double b_0, c_0;
> +
> +void
> +mul270snd (void)
> +{
> + c_0 = b_0 * 1.0iF * 1.0iF;
> +}
> +
> diff --git a/gcc/tree-data-ref.h b/gcc/tree-data-ref.h
> index 74f579c9f3f23bac25d21546068c2ab43209aa2b..8ad5fa521279b20fa5e63eecf442d5dc5c16e7ee 100644
> --- a/gcc/tree-data-ref.h
> +++ b/gcc/tree-data-ref.h
> @@ -600,10 +600,11 @@ same_data_refs_base_objects (data_reference_p a, data_reference_p b)
> }
>
> /* Return true when the data references A and B are accessing the same
> - memory object with the same access functions. */
> + memory object with the same access functions. Optionally skip the
> + last OFFSET dimensions in the data reference. */
But you skip the _first_ dimensions?
Otherwise looks OK to me.
Thanks,
Richard.
> static inline bool
> -same_data_refs (data_reference_p a, data_reference_p b)
> +same_data_refs (data_reference_p a, data_reference_p b, int offset = 0)
> {
> unsigned int i;
>
> @@ -614,7 +615,7 @@ same_data_refs (data_reference_p a, data_reference_p b)
> if (!same_data_refs_base_objects (a, b))
> return false;
>
> - for (i = 0; i < DR_NUM_DIMENSIONS (a); i++)
> + for (i = offset; i < DR_NUM_DIMENSIONS (a); i++)
> if (!eq_evolutions_p (DR_ACCESS_FN (a, i), DR_ACCESS_FN (b, i)))
> return false;
>
> diff --git a/gcc/tree-vect-slp-patterns.c b/gcc/tree-vect-slp-patterns.c
> index 0350441fad9690cd5d04337171ca3470a064a571..f8da4153632a700680091f37305a5d3078fbb0c5 100644
> --- a/gcc/tree-vect-slp-patterns.c
> +++ b/gcc/tree-vect-slp-patterns.c
> @@ -149,12 +149,13 @@ is_linear_load_p (load_permutation_t loads)
> int valid_patterns = 4;
> FOR_EACH_VEC_ELT (loads, i, load)
> {
> - if (candidates[0] != PERM_UNKNOWN && load != 1)
> + unsigned adj_load = load % 2;
> + if (candidates[0] != PERM_UNKNOWN && adj_load != 1)
> {
> candidates[0] = PERM_UNKNOWN;
> valid_patterns--;
> }
> - if (candidates[1] != PERM_UNKNOWN && load != 0)
> + if (candidates[1] != PERM_UNKNOWN && adj_load != 0)
> {
> candidates[1] = PERM_UNKNOWN;
> valid_patterns--;
> @@ -596,11 +597,12 @@ class complex_add_pattern : public complex_pattern
> public:
> void build (vec_info *);
> static internal_fn
> - matches (complex_operation_t op, slp_tree_to_load_perm_map_t *, slp_tree *,
> - vec<slp_tree> *);
> + matches (complex_operation_t op, slp_tree_to_load_perm_map_t *,
> + slp_compat_nodes_map_t *, slp_tree *, vec<slp_tree> *);
>
> static vect_pattern*
> - recognize (slp_tree_to_load_perm_map_t *, slp_tree *);
> + recognize (slp_tree_to_load_perm_map_t *, slp_compat_nodes_map_t *,
> + slp_tree *);
>
> static vect_pattern*
> mkInstance (slp_tree *node, vec<slp_tree> *m_ops, internal_fn ifn)
> @@ -647,6 +649,7 @@ complex_add_pattern::build (vec_info *vinfo)
> internal_fn
> complex_add_pattern::matches (complex_operation_t op,
> slp_tree_to_load_perm_map_t *perm_cache,
> + slp_compat_nodes_map_t * /* compat_cache */,
> slp_tree *node, vec<slp_tree> *ops)
> {
> internal_fn ifn = IFN_LAST;
> @@ -692,13 +695,14 @@ complex_add_pattern::matches (complex_operation_t op,
>
> vect_pattern*
> complex_add_pattern::recognize (slp_tree_to_load_perm_map_t *perm_cache,
> + slp_compat_nodes_map_t *compat_cache,
> slp_tree *node)
> {
> auto_vec<slp_tree> ops;
> complex_operation_t op
> = vect_detect_pair_op (*node, true, &ops);
> internal_fn ifn
> - = complex_add_pattern::matches (op, perm_cache, node, &ops);
> + = complex_add_pattern::matches (op, perm_cache, compat_cache, node, &ops);
> if (ifn == IFN_LAST)
> return NULL;
>
> @@ -709,147 +713,214 @@ complex_add_pattern::recognize (slp_tree_to_load_perm_map_t *perm_cache,
> * complex_mul_pattern
> ******************************************************************************/
>
> -/* Check to see if either of the trees in ARGS are a NEGATE_EXPR. If the first
> - child (args[0]) is a NEGATE_EXPR then NEG_FIRST_P is set to TRUE.
> -
> - If a negate is found then the values in ARGS are reordered such that the
> - negate node is always the second one and the entry is replaced by the child
> - of the negate node. */
> +/* Helper function to check if PERM is KIND or PERM_TOP. */
>
> static inline bool
> -vect_normalize_conj_loc (vec<slp_tree> &args, bool *neg_first_p = NULL)
> +is_eq_or_top (slp_tree_to_load_perm_map_t *perm_cache,
> + slp_tree op1, complex_perm_kinds_t kind1,
> + slp_tree op2, complex_perm_kinds_t kind2)
> {
> - gcc_assert (args.length () == 2);
> - bool neg_found = false;
> -
> - if (vect_match_expression_p (args[0], NEGATE_EXPR))
> - {
> - std::swap (args[0], args[1]);
> - neg_found = true;
> - if (neg_first_p)
> - *neg_first_p = true;
> - }
> - else if (vect_match_expression_p (args[1], NEGATE_EXPR))
> - {
> - neg_found = true;
> - if (neg_first_p)
> - *neg_first_p = false;
> - }
> + complex_perm_kinds_t perm1 = linear_loads_p (perm_cache, op1);
> + if (perm1 != kind1 && perm1 != PERM_TOP)
> + return false;
>
> - if (neg_found)
> - args[1] = SLP_TREE_CHILDREN (args[1])[0];
> + complex_perm_kinds_t perm2 = linear_loads_p (perm_cache, op2);
> + if (perm2 != kind2 && perm2 != PERM_TOP)
> + return false;
>
> - return neg_found;
> + return true;
> }
>
> -/* Helper function to check if PERM is KIND or PERM_TOP. */
> +enum _conj_status { CONJ_NONE, CONJ_FST, CONJ_SND };
>
> static inline bool
> -is_eq_or_top (complex_perm_kinds_t perm, complex_perm_kinds_t kind)
> +compatible_complex_nodes_p (slp_compat_nodes_map_t *compat_cache,
> + slp_tree a, int *pa, slp_tree b, int *pb)
> {
> - return perm == kind || perm == PERM_TOP;
> -}
> + bool *tmp;
> + std::pair<slp_tree, slp_tree> key = std::make_pair(a, b);
> + if ((tmp = compat_cache->get (key)) != NULL)
> + return *tmp;
>
> -/* Helper function that checks to see if LEFT_OP and RIGHT_OP are both MULT_EXPR
> - nodes but also that they represent an operation that is either a complex
> - multiplication or a complex multiplication by conjugated value.
> + compat_cache->put (key, false);
>
> - Of the negation is expected to be in the first half of the tree (As required
> - by an FMS pattern) then NEG_FIRST is true. If the operation is a conjugate
> - operation then CONJ_FIRST_OPERAND is set to indicate whether the first or
> - second operand contains the conjugate operation. */
> + if (SLP_TREE_CHILDREN (a).length () != SLP_TREE_CHILDREN (b).length ())
> + return false;
>
> -static inline bool
> -vect_validate_multiplication (slp_tree_to_load_perm_map_t *perm_cache,
> - const vec<slp_tree> &left_op,
> - const vec<slp_tree> &right_op,
> - bool neg_first, bool *conj_first_operand,
> - bool fms)
> -{
> - /* The presence of a negation indicates that we have either a conjugate or a
> - rotation. We need to distinguish which one. */
> - *conj_first_operand = false;
> - complex_perm_kinds_t kind;
> -
> - /* Complex conjugates have the negation on the imaginary part of the
> - number where rotations affect the real component. So check if the
> - negation is on a dup of lane 1. */
> - if (fms)
> + if (SLP_TREE_DEF_TYPE (a) != SLP_TREE_DEF_TYPE (b))
> + return false;
> +
> + /* Only internal nodes can be loads, as such we can't check further if they
> + are externals. */
> + if (SLP_TREE_DEF_TYPE (a) != vect_internal_def)
> {
> - /* Canonicalization for fms is not consistent. So have to test both
> - variants to be sure. This needs to be fixed in the mid-end so
> - this part can be simpler. */
> - kind = linear_loads_p (perm_cache, right_op[0]);
> - if (!((is_eq_or_top (linear_loads_p (perm_cache, right_op[0]), PERM_ODDODD)
> - && is_eq_or_top (linear_loads_p (perm_cache, right_op[1]),
> - PERM_ODDEVEN))
> - || (kind == PERM_ODDEVEN
> - && is_eq_or_top (linear_loads_p (perm_cache, right_op[1]),
> - PERM_ODDODD))))
> - return false;
> + for (unsigned i = 0; i < SLP_TREE_SCALAR_OPS (a).length (); i++)
> + {
> + tree op1 = SLP_TREE_SCALAR_OPS (a)[pa[i % 2]];
> + tree op2 = SLP_TREE_SCALAR_OPS (b)[pb[i % 2]];
> + if (!operand_equal_p (op1, op2, 0))
> + return false;
> + }
> +
> + compat_cache->put (key, true);
> + return true;
> + }
> +
> + auto a_stmt = STMT_VINFO_STMT (SLP_TREE_REPRESENTATIVE (a));
> + auto b_stmt = STMT_VINFO_STMT (SLP_TREE_REPRESENTATIVE (b));
> +
> + if (gimple_code (a_stmt) != gimple_code (b_stmt))
> + return false;
> +
> + /* code, children, type, externals, loads, constants */
> + if (gimple_num_args (a_stmt) != gimple_num_args (b_stmt))
> + return false;
> +
> + /* At this point, a and b are known to be the same gimple operations. */
> + if (is_gimple_call (a_stmt))
> + {
> + if (!compatible_calls_p (dyn_cast <gcall *> (a_stmt),
> + dyn_cast <gcall *> (b_stmt)))
> + return false;
> }
> + else if (!is_gimple_assign (a_stmt))
> + return false;
> else
> {
> - if (linear_loads_p (perm_cache, right_op[1]) != PERM_ODDODD
> - && !is_eq_or_top (linear_loads_p (perm_cache, right_op[0]),
> - PERM_ODDEVEN))
> + tree_code acode = gimple_assign_rhs_code (a_stmt);
> + tree_code bcode = gimple_assign_rhs_code (b_stmt);
> + if ((acode == REALPART_EXPR || acode == IMAGPART_EXPR)
> + && (bcode == REALPART_EXPR || bcode == IMAGPART_EXPR))
> + return true;
> +
> + if (acode != bcode)
> return false;
> }
>
> - /* Deal with differences in indexes. */
> - int index1 = fms ? 1 : 0;
> - int index2 = fms ? 0 : 1;
> -
> - /* Check if the conjugate is on the second first or second operand. The
> - order of the node with the conjugate value determines this, and the dup
> - node must be one of lane 0 of the same DR as the neg node. */
> - kind = linear_loads_p (perm_cache, left_op[index1]);
> - if (kind == PERM_TOP)
> + if (!SLP_TREE_LOAD_PERMUTATION (a).exists ()
> + || !SLP_TREE_LOAD_PERMUTATION (b).exists ())
> {
> - if (linear_loads_p (perm_cache, left_op[index2]) == PERM_EVENODD)
> - return true;
> + for (unsigned i = 0; i < gimple_num_args (a_stmt); i++)
> + {
> + tree t1 = gimple_arg (a_stmt, i);
> + tree t2 = gimple_arg (b_stmt, i);
> + if (TREE_CODE (t1) != TREE_CODE (t2))
> + return false;
> +
> + /* If SSA name then we will need to inspect the children
> + so we can punt here. */
> + if (TREE_CODE (t1) == SSA_NAME)
> + continue;
> +
> + if (!operand_equal_p (t1, t2, 0))
> + return false;
> + }
> }
> - else if (kind == PERM_EVENODD && !neg_first)
> + else
> {
> - if ((kind = linear_loads_p (perm_cache, left_op[index2])) != PERM_EVENEVEN)
> + auto dr1 = STMT_VINFO_DATA_REF (SLP_TREE_REPRESENTATIVE (a));
> + auto dr2 = STMT_VINFO_DATA_REF (SLP_TREE_REPRESENTATIVE (b));
> + /* Don't check the last dimension as that's checked by the lineary
> + checks. This check is also much stricter than what we need
> + because it doesn't consider loading from adjacent elements
> + in the same struct as loading from the same base object.
> + But for now, I'll play it safe. */
> + if (!same_data_refs (dr1, dr2, 1))
> return false;
> - return true;
> }
> - else if (kind == PERM_EVENEVEN && neg_first)
> +
> + for (unsigned i = 0; i < SLP_TREE_CHILDREN (a).length (); i++)
> {
> - if ((kind = linear_loads_p (perm_cache, left_op[index2])) != PERM_EVENODD)
> + if (!compatible_complex_nodes_p (compat_cache,
> + SLP_TREE_CHILDREN (a)[i], pa,
> + SLP_TREE_CHILDREN (b)[i], pb))
> return false;
> -
> - *conj_first_operand = true;
> - return true;
> }
> - else
> - return false;
> -
> - if (kind != PERM_EVENEVEN)
> - return false;
>
> + compat_cache->put (key, true);
> return true;
> }
>
> -/* Helper function to help distinguish between a conjugate and a rotation in a
> - complex multiplication. The operations have similar shapes but the order of
> - the load permutes are different. This function returns TRUE when the order
> - is consistent with a multiplication or multiplication by conjugated
> - operand but returns FALSE if it's a multiplication by rotated operand. */
> -
> static inline bool
> vect_validate_multiplication (slp_tree_to_load_perm_map_t *perm_cache,
> - const vec<slp_tree> &op,
> - complex_perm_kinds_t permKind)
> + slp_compat_nodes_map_t *compat_cache,
> + vec<slp_tree> &left_op,
> + vec<slp_tree> &right_op,
> + bool subtract,
> + enum _conj_status *_status)
> {
> - /* The left node is the more common case, test it first. */
> - if (!is_eq_or_top (linear_loads_p (perm_cache, op[0]), permKind))
> + auto_vec<slp_tree> ops;
> + enum _conj_status stats = CONJ_NONE;
> +
> + /* The complex operations can occur in two layouts and two permute sequences
> + so declare them and re-use them. */
> + int styles[][4] = { { 0, 2, 1, 3} /* {L1, R1} + {L2, R2}. */
> + , { 0, 3, 1, 2} /* {L1, R2} + {L2, R1}. */
> + };
> +
> + /* Now for the corresponding permutes that go with these values. */
> + complex_perm_kinds_t perms[][4]
> + = { { PERM_EVENEVEN, PERM_ODDODD, PERM_EVENODD, PERM_ODDEVEN }
> + , { PERM_EVENODD, PERM_ODDEVEN, PERM_EVENEVEN, PERM_ODDODD }
> + };
> +
> + /* These permutes are used during comparisons of externals on which
> + we require strict equality. */
> + int cq[][4][2]
> + = { { { 0, 0 }, { 1, 1 }, { 0, 1 }, { 1, 0 } }
> + , { { 0, 1 }, { 1, 0 }, { 0, 0 }, { 1, 1 } }
> + };
> +
> + /* Default to style and perm 0, most operations use this one. */
> + int style = 0;
> + int perm = subtract ? 1 : 0;
> +
> + /* Check if we have a negate operation, if so absorb the node and continue
> + looking. */
> + bool neg0 = vect_match_expression_p (right_op[0], NEGATE_EXPR);
> + bool neg1 = vect_match_expression_p (right_op[1], NEGATE_EXPR);
> +
> + /* Determine which style we're looking at. We only have different ones
> + whenever a conjugate is involved. */
> + if (neg0 && neg1)
> + ;
> + else if (neg0)
> {
> - if (!is_eq_or_top (linear_loads_p (perm_cache, op[1]), permKind))
> - return false;
> + right_op[0] = SLP_TREE_CHILDREN (right_op[0])[0];
> + stats = CONJ_FST;
> + if (subtract)
> + perm = 0;
> }
> - return true;
> + else if (neg1)
> + {
> + right_op[1] = SLP_TREE_CHILDREN (right_op[1])[0];
> + stats = CONJ_SND;
> + perm = 1;
> + }
> +
> + *_status = stats;
> +
> + /* Flatten the inputs after we've remapped them. */
> + ops.create (4);
> + ops.safe_splice (left_op);
> + ops.safe_splice (right_op);
> +
> + /* Extract out the elements to check. */
> + slp_tree op0 = ops[styles[style][0]];
> + slp_tree op1 = ops[styles[style][1]];
> + slp_tree op2 = ops[styles[style][2]];
> + slp_tree op3 = ops[styles[style][3]];
> +
> + /* Do cheapest test first. If failed no need to analyze further. */
> + if (linear_loads_p (perm_cache, op0) != perms[perm][0]
> + || linear_loads_p (perm_cache, op1) != perms[perm][1]
> + || !is_eq_or_top (perm_cache, op2, perms[perm][2], op3, perms[perm][3]))
> + return false;
> +
> + return compatible_complex_nodes_p (compat_cache, op0, cq[perm][0], op1,
> + cq[perm][1])
> + && compatible_complex_nodes_p (compat_cache, op2, cq[perm][2], op3,
> + cq[perm][3]);
> }
>
> /* This function combines two nodes containing only even and only odd lanes
> @@ -908,11 +979,12 @@ class complex_mul_pattern : public complex_pattern
> public:
> void build (vec_info *);
> static internal_fn
> - matches (complex_operation_t op, slp_tree_to_load_perm_map_t *, slp_tree *,
> - vec<slp_tree> *);
> + matches (complex_operation_t op, slp_tree_to_load_perm_map_t *,
> + slp_compat_nodes_map_t *, slp_tree *, vec<slp_tree> *);
>
> static vect_pattern*
> - recognize (slp_tree_to_load_perm_map_t *, slp_tree *);
> + recognize (slp_tree_to_load_perm_map_t *, slp_compat_nodes_map_t *,
> + slp_tree *);
>
> static vect_pattern*
> mkInstance (slp_tree *node, vec<slp_tree> *m_ops, internal_fn ifn)
> @@ -943,6 +1015,7 @@ class complex_mul_pattern : public complex_pattern
> internal_fn
> complex_mul_pattern::matches (complex_operation_t op,
> slp_tree_to_load_perm_map_t *perm_cache,
> + slp_compat_nodes_map_t *compat_cache,
> slp_tree *node, vec<slp_tree> *ops)
> {
> internal_fn ifn = IFN_LAST;
> @@ -990,17 +1063,13 @@ complex_mul_pattern::matches (complex_operation_t op,
> || linear_loads_p (perm_cache, left_op[1]) == PERM_ODDEVEN)
> return IFN_LAST;
>
> - bool neg_first = false;
> - bool conj_first_operand = false;
> - bool is_neg = vect_normalize_conj_loc (right_op, &neg_first);
> + enum _conj_status status;
> + if (!vect_validate_multiplication (perm_cache, compat_cache, left_op,
> + right_op, false, &status))
> + return IFN_LAST;
>
> - if (!is_neg)
> + if (status == CONJ_NONE)
> {
> - /* A multiplication needs to multiply agains the real pair, otherwise
> - the pattern matches that of FMS. */
> - if (!vect_validate_multiplication (perm_cache, left_op, PERM_EVENEVEN)
> - || vect_normalize_conj_loc (left_op))
> - return IFN_LAST;
> if (add0)
> ifn = IFN_COMPLEX_FMA;
> else
> @@ -1008,11 +1077,6 @@ complex_mul_pattern::matches (complex_operation_t op,
> }
> else
> {
> - if (!vect_validate_multiplication (perm_cache, left_op, right_op,
> - neg_first, &conj_first_operand,
> - false))
> - return IFN_LAST;
> -
> if(add0)
> ifn = IFN_COMPLEX_FMA_CONJ;
> else
> @@ -1029,19 +1093,13 @@ complex_mul_pattern::matches (complex_operation_t op,
> ops->quick_push (add0);
>
> complex_perm_kinds_t kind = linear_loads_p (perm_cache, left_op[0]);
> - if (kind == PERM_EVENODD)
> - {
> - ops->quick_push (left_op[1]);
> - ops->quick_push (right_op[1]);
> - ops->quick_push (left_op[0]);
> - }
> - else if (kind == PERM_TOP)
> + if (kind == PERM_EVENODD || kind == PERM_TOP)
> {
> ops->quick_push (left_op[1]);
> ops->quick_push (right_op[1]);
> ops->quick_push (left_op[0]);
> }
> - else if (kind == PERM_EVENEVEN && !conj_first_operand)
> + else if (kind == PERM_EVENEVEN && status != CONJ_SND)
> {
> ops->quick_push (left_op[0]);
> ops->quick_push (right_op[0]);
> @@ -1061,13 +1119,14 @@ complex_mul_pattern::matches (complex_operation_t op,
>
> vect_pattern*
> complex_mul_pattern::recognize (slp_tree_to_load_perm_map_t *perm_cache,
> + slp_compat_nodes_map_t *compat_cache,
> slp_tree *node)
> {
> auto_vec<slp_tree> ops;
> complex_operation_t op
> = vect_detect_pair_op (*node, true, &ops);
> internal_fn ifn
> - = complex_mul_pattern::matches (op, perm_cache, node, &ops);
> + = complex_mul_pattern::matches (op, perm_cache, compat_cache, node, &ops);
> if (ifn == IFN_LAST)
> return NULL;
>
> @@ -1097,8 +1156,8 @@ complex_mul_pattern::build (vec_info *vinfo)
>
> /* First re-arrange the children. */
> SLP_TREE_CHILDREN (*this->m_node).reserve_exact (2);
> - SLP_TREE_CHILDREN (*this->m_node)[0] = this->m_ops[2];
> - SLP_TREE_CHILDREN (*this->m_node)[1] = newnode;
> + SLP_TREE_CHILDREN (*this->m_node)[0] = newnode;
> + SLP_TREE_CHILDREN (*this->m_node)[1] = this->m_ops[2];
> break;
> }
> case IFN_COMPLEX_FMA:
> @@ -1115,9 +1174,9 @@ complex_mul_pattern::build (vec_info *vinfo)
>
> /* First re-arrange the children. */
> SLP_TREE_CHILDREN (*this->m_node).safe_grow (3);
> - SLP_TREE_CHILDREN (*this->m_node)[0] = this->m_ops[0];
> + SLP_TREE_CHILDREN (*this->m_node)[0] = newnode;
> SLP_TREE_CHILDREN (*this->m_node)[1] = this->m_ops[3];
> - SLP_TREE_CHILDREN (*this->m_node)[2] = newnode;
> + SLP_TREE_CHILDREN (*this->m_node)[2] = this->m_ops[0];
>
> /* Tell the builder to expect an extra argument. */
> this->m_num_args++;
> @@ -1147,11 +1206,12 @@ class complex_fms_pattern : public complex_pattern
> public:
> void build (vec_info *);
> static internal_fn
> - matches (complex_operation_t op, slp_tree_to_load_perm_map_t *, slp_tree *,
> - vec<slp_tree> *);
> + matches (complex_operation_t op, slp_tree_to_load_perm_map_t *,
> + slp_compat_nodes_map_t *, slp_tree *, vec<slp_tree> *);
>
> static vect_pattern*
> - recognize (slp_tree_to_load_perm_map_t *, slp_tree *);
> + recognize (slp_tree_to_load_perm_map_t *, slp_compat_nodes_map_t *,
> + slp_tree *);
>
> static vect_pattern*
> mkInstance (slp_tree *node, vec<slp_tree> *m_ops, internal_fn ifn)
> @@ -1182,6 +1242,7 @@ class complex_fms_pattern : public complex_pattern
> internal_fn
> complex_fms_pattern::matches (complex_operation_t op,
> slp_tree_to_load_perm_map_t *perm_cache,
> + slp_compat_nodes_map_t *compat_cache,
> slp_tree * ref_node, vec<slp_tree> *ops)
> {
> internal_fn ifn = IFN_LAST;
> @@ -1197,6 +1258,8 @@ complex_fms_pattern::matches (complex_operation_t op,
> if (!vect_match_expression_p (root, MINUS_EXPR))
> return IFN_LAST;
>
> + /* TODO: Support invariants here, with the new layout CADD now
> + can match before we get a chance to try CFMS. */
> auto nodes = SLP_TREE_CHILDREN (root);
> if (!vect_match_expression_p (nodes[1], MULT_EXPR)
> || vect_detect_pair_op (nodes[0]) != PLUS_MINUS)
> @@ -1217,16 +1280,14 @@ complex_fms_pattern::matches (complex_operation_t op,
> || !vect_match_expression_p (l0node[1], MULT_EXPR))
> return IFN_LAST;
>
> - bool is_neg = vect_normalize_conj_loc (left_op);
> -
> - bool conj_first_operand = false;
> - if (!vect_validate_multiplication (perm_cache, right_op, left_op, false,
> - &conj_first_operand, true))
> + enum _conj_status status;
> + if (!vect_validate_multiplication (perm_cache, compat_cache, right_op,
> + left_op, true, &status))
> return IFN_LAST;
>
> - if (!is_neg)
> + if (status == CONJ_NONE)
> ifn = IFN_COMPLEX_FMS;
> - else if (is_neg)
> + else
> ifn = IFN_COMPLEX_FMS_CONJ;
>
> if (!vect_pattern_validate_optab (ifn, *ref_node))
> @@ -1243,26 +1304,12 @@ complex_fms_pattern::matches (complex_operation_t op,
> ops->quick_push (right_op[1]);
> ops->quick_push (left_op[1]);
> }
> - else if (kind == PERM_TOP)
> - {
> - ops->quick_push (l0node[0]);
> - ops->quick_push (right_op[1]);
> - ops->quick_push (right_op[0]);
> - ops->quick_push (left_op[0]);
> - }
> - else if (kind == PERM_EVENEVEN && !is_neg)
> - {
> - ops->quick_push (l0node[0]);
> - ops->quick_push (right_op[1]);
> - ops->quick_push (right_op[0]);
> - ops->quick_push (left_op[0]);
> - }
> else
> {
> ops->quick_push (l0node[0]);
> ops->quick_push (right_op[1]);
> ops->quick_push (right_op[0]);
> - ops->quick_push (left_op[1]);
> + ops->quick_push (left_op[0]);
> }
>
> return ifn;
> @@ -1272,13 +1319,14 @@ complex_fms_pattern::matches (complex_operation_t op,
>
> vect_pattern*
> complex_fms_pattern::recognize (slp_tree_to_load_perm_map_t *perm_cache,
> + slp_compat_nodes_map_t *compat_cache,
> slp_tree *node)
> {
> auto_vec<slp_tree> ops;
> complex_operation_t op
> = vect_detect_pair_op (*node, true, &ops);
> internal_fn ifn
> - = complex_fms_pattern::matches (op, perm_cache, node, &ops);
> + = complex_fms_pattern::matches (op, perm_cache, compat_cache, node, &ops);
> if (ifn == IFN_LAST)
> return NULL;
>
> @@ -1305,9 +1353,24 @@ complex_fms_pattern::build (vec_info *vinfo)
> SLP_TREE_CHILDREN (*this->m_node).create (3);
>
> /* First re-arrange the children. */
> + switch (this->m_ifn)
> + {
> + case IFN_COMPLEX_FMS:
> + {
> + SLP_TREE_CHILDREN (*this->m_node).quick_push (this->m_ops[1]);
> + SLP_TREE_CHILDREN (*this->m_node).quick_push (newnode);
> + break;
> + }
> + case IFN_COMPLEX_FMS_CONJ:
> + {
> + SLP_TREE_CHILDREN (*this->m_node).quick_push (newnode);
> + SLP_TREE_CHILDREN (*this->m_node).quick_push (this->m_ops[1]);
> + break;
> + }
> + default:
> + gcc_unreachable ();
> + }
> SLP_TREE_CHILDREN (*this->m_node).quick_push (this->m_ops[0]);
> - SLP_TREE_CHILDREN (*this->m_node).quick_push (this->m_ops[1]);
> - SLP_TREE_CHILDREN (*this->m_node).quick_push (newnode);
>
> /* And then rewrite the node itself. */
> complex_pattern::build (vinfo);
> @@ -1334,11 +1397,12 @@ class complex_operations_pattern : public complex_pattern
> public:
> void build (vec_info *);
> static internal_fn
> - matches (complex_operation_t op, slp_tree_to_load_perm_map_t *, slp_tree *,
> - vec<slp_tree> *);
> + matches (complex_operation_t op, slp_tree_to_load_perm_map_t *,
> + slp_compat_nodes_map_t *, slp_tree *, vec<slp_tree> *);
>
> static vect_pattern*
> - recognize (slp_tree_to_load_perm_map_t *, slp_tree *);
> + recognize (slp_tree_to_load_perm_map_t *, slp_compat_nodes_map_t *,
> + slp_tree *);
> };
>
> /* Dummy matches implementation for proxy object. */
> @@ -1347,6 +1411,7 @@ internal_fn
> complex_operations_pattern::
> matches (complex_operation_t /* op */,
> slp_tree_to_load_perm_map_t * /* perm_cache */,
> + slp_compat_nodes_map_t * /* compat_cache */,
> slp_tree * /* ref_node */, vec<slp_tree> * /* ops */)
> {
> return IFN_LAST;
> @@ -1356,6 +1421,7 @@ matches (complex_operation_t /* op */,
>
> vect_pattern*
> complex_operations_pattern::recognize (slp_tree_to_load_perm_map_t *perm_cache,
> + slp_compat_nodes_map_t *ccache,
> slp_tree *node)
> {
> auto_vec<slp_tree> ops;
> @@ -1363,15 +1429,15 @@ complex_operations_pattern::recognize (slp_tree_to_load_perm_map_t *perm_cache,
> = vect_detect_pair_op (*node, true, &ops);
> internal_fn ifn = IFN_LAST;
>
> - ifn = complex_fms_pattern::matches (op, perm_cache, node, &ops);
> + ifn = complex_fms_pattern::matches (op, perm_cache, ccache, node, &ops);
> if (ifn != IFN_LAST)
> return complex_fms_pattern::mkInstance (node, &ops, ifn);
>
> - ifn = complex_mul_pattern::matches (op, perm_cache, node, &ops);
> + ifn = complex_mul_pattern::matches (op, perm_cache, ccache, node, &ops);
> if (ifn != IFN_LAST)
> return complex_mul_pattern::mkInstance (node, &ops, ifn);
>
> - ifn = complex_add_pattern::matches (op, perm_cache, node, &ops);
> + ifn = complex_add_pattern::matches (op, perm_cache, ccache, node, &ops);
> if (ifn != IFN_LAST)
> return complex_add_pattern::mkInstance (node, &ops, ifn);
>
> @@ -1398,11 +1464,13 @@ class addsub_pattern : public vect_pattern
> void build (vec_info *);
>
> static vect_pattern*
> - recognize (slp_tree_to_load_perm_map_t *, slp_tree *);
> + recognize (slp_tree_to_load_perm_map_t *, slp_compat_nodes_map_t *,
> + slp_tree *);
> };
>
> vect_pattern *
> -addsub_pattern::recognize (slp_tree_to_load_perm_map_t *, slp_tree *node_)
> +addsub_pattern::recognize (slp_tree_to_load_perm_map_t *,
> + slp_compat_nodes_map_t *, slp_tree *node_)
> {
> slp_tree node = *node_;
> if (SLP_TREE_CODE (node) != VEC_PERM_EXPR
> diff --git a/gcc/tree-vect-slp.c b/gcc/tree-vect-slp.c
> index b912c3577df61a694d5bb9e22c5303fe6a48ab6e..cb577f8a612d583254e42bb06a6d7a0875de5e75 100644
> --- a/gcc/tree-vect-slp.c
> +++ b/gcc/tree-vect-slp.c
> @@ -804,7 +804,7 @@ vect_get_and_check_slp_defs (vec_info *vinfo, unsigned char swap,
> /* Return true if call statements CALL1 and CALL2 are similar enough
> to be combined into the same SLP group. */
>
> -static bool
> +bool
> compatible_calls_p (gcall *call1, gcall *call2)
> {
> unsigned int nargs = gimple_call_num_args (call1);
> @@ -2907,6 +2907,7 @@ optimize_load_redistribution (scalar_stmts_to_slp_tree_map_t *bst_map,
> static bool
> vect_match_slp_patterns_2 (slp_tree *ref_node, vec_info *vinfo,
> slp_tree_to_load_perm_map_t *perm_cache,
> + slp_compat_nodes_map_t *compat_cache,
> hash_set<slp_tree> *visited)
> {
> unsigned i;
> @@ -2918,11 +2919,13 @@ vect_match_slp_patterns_2 (slp_tree *ref_node, vec_info *vinfo,
> slp_tree child;
> FOR_EACH_VEC_ELT (SLP_TREE_CHILDREN (node), i, child)
> found_p |= vect_match_slp_patterns_2 (&SLP_TREE_CHILDREN (node)[i],
> - vinfo, perm_cache, visited);
> + vinfo, perm_cache, compat_cache,
> + visited);
>
> for (unsigned x = 0; x < num__slp_patterns; x++)
> {
> - vect_pattern *pattern = slp_patterns[x] (perm_cache, ref_node);
> + vect_pattern *pattern
> + = slp_patterns[x] (perm_cache, compat_cache, ref_node);
> if (pattern)
> {
> pattern->build (vinfo);
> @@ -2943,7 +2946,8 @@ vect_match_slp_patterns_2 (slp_tree *ref_node, vec_info *vinfo,
> static bool
> vect_match_slp_patterns (slp_instance instance, vec_info *vinfo,
> hash_set<slp_tree> *visited,
> - slp_tree_to_load_perm_map_t *perm_cache)
> + slp_tree_to_load_perm_map_t *perm_cache,
> + slp_compat_nodes_map_t *compat_cache)
> {
> DUMP_VECT_SCOPE ("vect_match_slp_patterns");
> slp_tree *ref_node = &SLP_INSTANCE_TREE (instance);
> @@ -2953,7 +2957,8 @@ vect_match_slp_patterns (slp_instance instance, vec_info *vinfo,
> "Analyzing SLP tree %p for patterns\n",
> SLP_INSTANCE_TREE (instance));
>
> - return vect_match_slp_patterns_2 (ref_node, vinfo, perm_cache, visited);
> + return vect_match_slp_patterns_2 (ref_node, vinfo, perm_cache, compat_cache,
> + visited);
> }
>
> /* STMT_INFO is a store group of size GROUP_SIZE that we are considering
> @@ -3437,12 +3442,14 @@ vect_analyze_slp (vec_info *vinfo, unsigned max_tree_size)
>
> hash_set<slp_tree> visited_patterns;
> slp_tree_to_load_perm_map_t perm_cache;
> + slp_compat_nodes_map_t compat_cache;
>
> /* See if any patterns can be found in the SLP tree. */
> bool pattern_found = false;
> FOR_EACH_VEC_ELT (LOOP_VINFO_SLP_INSTANCES (vinfo), i, instance)
> pattern_found |= vect_match_slp_patterns (instance, vinfo,
> - &visited_patterns, &perm_cache);
> + &visited_patterns, &perm_cache,
> + &compat_cache);
>
> /* If any were found optimize permutations of loads. */
> if (pattern_found)
> diff --git a/gcc/tree-vectorizer.h b/gcc/tree-vectorizer.h
> index 2f6e1e268fb07e9de065ff9c45af87546e565d66..83cd0919c7838c65576e1debd881e0ec636a605a 100644
> --- a/gcc/tree-vectorizer.h
> +++ b/gcc/tree-vectorizer.h
> @@ -2268,6 +2268,7 @@ extern void duplicate_and_interleave (vec_info *, gimple_seq *, tree,
> extern int vect_get_place_in_interleaving_chain (stmt_vec_info, stmt_vec_info);
> extern slp_tree vect_create_new_slp_node (unsigned, tree_code);
> extern void vect_free_slp_tree (slp_tree);
> +extern bool compatible_calls_p (gcall *, gcall *);
>
> /* In tree-vect-patterns.c. */
> extern void
> @@ -2306,6 +2307,12 @@ typedef enum _complex_perm_kinds {
> typedef hash_map <slp_tree, complex_perm_kinds_t>
> slp_tree_to_load_perm_map_t;
>
> +/* Cache from nodes pair to being compatible or not. */
> +typedef pair_hash <nofree_ptr_hash <_slp_tree>,
> + nofree_ptr_hash <_slp_tree>> slp_node_hash;
> +typedef hash_map <slp_node_hash, bool> slp_compat_nodes_map_t;
> +
> +
> /* Vector pattern matcher base class. All SLP pattern matchers must inherit
> from this type. */
>
> @@ -2338,7 +2345,8 @@ class vect_pattern
> public:
>
> /* Create a new instance of the pattern matcher class of the given type. */
> - static vect_pattern* recognize (slp_tree_to_load_perm_map_t *, slp_tree *);
> + static vect_pattern* recognize (slp_tree_to_load_perm_map_t *,
> + slp_compat_nodes_map_t *, slp_tree *);
>
> /* Build the pattern from the data collected so far. */
> virtual void build (vec_info *) = 0;
> @@ -2352,6 +2360,7 @@ class vect_pattern
>
> /* Function pointer to create a new pattern matcher from a generic type. */
> typedef vect_pattern* (*vect_pattern_decl_t) (slp_tree_to_load_perm_map_t *,
> + slp_compat_nodes_map_t *,
> slp_tree *);
>
> /* List of supported pattern matchers. */
>
>
> --
next prev parent reply other threads:[~2022-01-10 13:00 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-12-17 15:42 Tamar Christina
2021-12-17 15:42 ` [2/3 PATCH]AArch64 use canonical ordering for complex mul, fma and fms Tamar Christina
2021-12-17 16:24 ` Richard Sandiford
2021-12-17 16:48 ` Richard Sandiford
2021-12-20 16:20 ` Tamar Christina
2022-01-11 7:10 ` Tamar Christina
2022-02-01 9:55 ` Tamar Christina
2022-02-01 11:04 ` Richard Sandiford
2021-12-17 15:43 ` [3/3 PATCH][AArch32] " Tamar Christina
2021-12-20 16:22 ` Tamar Christina
2022-01-11 7:10 ` Tamar Christina
2022-02-01 9:54 ` Tamar Christina
2022-02-01 9:56 ` Kyrylo Tkachov
2021-12-17 16:18 ` [1/3 PATCH]middle-end vect: Simplify and extend the complex numbers validation routines Richard Sandiford
2021-12-20 16:18 ` Tamar Christina
2022-01-10 10:16 ` Tamar Christina
2022-01-10 13:00 ` Richard Biener [this message]
2022-01-11 7:31 ` Tamar Christina
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='CAFiYyc3zjSp=WtV9MhckoTSTQRutdgBHJvRfpAW=tiJpqfhUOg@mail.gmail.com' \
--to=richard.guenther@gmail.com \
--cc=gcc-patches@gcc.gnu.org \
--cc=nd@arm.com \
--cc=rguenther@suse.de \
--cc=tamar.christina@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).