From: David Edelsohn <dje.gcc@gmail.com>
To: Eric Botcazou <ebotcazou@adacore.com>
Cc: Alexandre Oliva <aoliva@redhat.com>,
GCC Patches <gcc-patches@gcc.gnu.org>,
Christophe Lyon <christophe.lyon@linaro.org>,
"William J. Schmidt" <wschmidt@linux.vnet.ibm.com>,
Michael Meissner <meissner@linux.vnet.ibm.com>
Subject: Re: [PR64164] drop copyrename, integrate into expand
Date: Tue, 09 Jun 2015 21:38:00 -0000 [thread overview]
Message-ID: <CAGWvny=xVM3tLG0yzY9T86cw35iswN8=ChWmpZb07W0gAa64tw@mail.gmail.com> (raw)
In-Reply-To: <2821987.h0ylfQACV9@polaris>
Alex, I sent you a pre-processed file off-list. You could try
bootstrapping on PPC64 on the GCC Compile Farm.
The SPARC failure reports a different error than PPC and ARM. The PPC
and ARM failures are the same message, but seem to be on different
files.
After the breakage from Aldy's patch all weekend, this failure is very
frustrating. If this is not fixed within 24 hours, your patch must be
reverted. This patch clearly should have been tested on more
architectures than x86 before being approved and merged.
Thanks, David
On Tue, Jun 9, 2015 at 5:27 PM, Eric Botcazou <ebotcazou@adacore.com> wrote:
>> I'll look into cross-building some embedded targets and see if any
>> further issues surface.
>
> SPARC is also broken, see my message and the tescase under the PR.
>
> --
> Eric Botcazou
next prev parent reply other threads:[~2015-06-09 21:36 UTC|newest]
Thread overview: 113+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-06-09 16:19 David Edelsohn
2015-06-09 18:36 ` Alexandre Oliva
2015-06-09 20:24 ` Alexandre Oliva
2015-06-09 20:59 ` Jakub Jelinek
2015-06-09 21:36 ` Eric Botcazou
2015-06-09 21:38 ` David Edelsohn [this message]
-- strict thread matches above, loose matches on Subject: below --
2015-03-27 18:04 Alexandre Oliva
2015-03-27 18:11 ` Alexandre Oliva
2015-03-28 19:22 ` Alexandre Oliva
2015-03-31 5:11 ` Jeff Law
2015-04-03 13:17 ` Alexandre Oliva
2015-04-06 16:08 ` Jeff Law
2015-04-24 1:56 ` Alexandre Oliva
2015-04-27 11:39 ` Richard Biener
2015-06-06 5:12 ` Alexandre Oliva
2015-06-08 8:16 ` Richard Biener
2015-06-09 8:58 ` Christophe Lyon
2015-06-10 0:28 ` Alexandre Oliva
2015-06-10 13:36 ` Richard Biener
2015-07-16 7:58 ` Alexandre Oliva
2015-07-16 8:50 ` Richard Biener
2015-07-16 21:33 ` Alexandre Oliva
2015-07-18 8:26 ` Alexandre Oliva
2015-07-21 13:25 ` Richard Biener
2015-07-22 17:13 ` Alexandre Oliva
2015-07-22 17:43 ` Alexandre Oliva
2015-07-23 11:04 ` Richard Biener
2015-07-23 15:42 ` Alexandre Oliva
2015-07-23 20:35 ` Segher Boessenkool
2015-07-23 21:24 ` H.J. Lu
2015-07-23 22:11 ` H.J. Lu
2015-07-24 1:31 ` David Edelsohn
2015-07-24 5:08 ` H.J. Lu
2015-07-24 9:26 ` Richard Biener
2015-07-24 12:50 ` H.J. Lu
2015-07-24 20:20 ` Alexandre Oliva
2015-07-25 2:37 ` David Edelsohn
2015-07-27 22:16 ` Alexandre Oliva
2015-07-27 22:31 ` H.J. Lu
2015-07-24 18:51 ` Alexandre Oliva
2015-07-24 19:12 ` H.J. Lu
2015-07-24 19:31 ` David Edelsohn
2015-07-24 20:43 ` Alexandre Oliva
2015-07-24 20:47 ` Alexandre Oliva
2015-07-24 21:53 ` H.J. Lu
2015-07-25 7:17 ` Richard Biener
2015-07-29 20:52 ` Alexandre Oliva
2015-07-29 21:06 ` H.J. Lu
2015-07-30 17:47 ` H.J. Lu
2015-08-03 23:46 ` Alexandre Oliva
2015-08-04 9:48 ` Richard Biener
2015-08-05 0:39 ` Alexandre Oliva
2015-08-05 9:14 ` Richard Biener
2015-08-05 23:03 ` Alexandre Oliva
2015-08-10 8:24 ` James Greenhalgh
2015-08-10 15:14 ` Jeff Law
2015-08-11 4:53 ` Patrick Marlier
2015-08-14 19:03 ` Alexandre Oliva
2015-08-15 8:57 ` Andreas Schwab
2015-08-16 13:00 ` Alexandre Oliva
[not found] ` <m2k2sv8s21.fsf@linux-m68k.org>
2015-08-17 5:05 ` Alexandre Oliva
2015-08-17 9:29 ` Kyrill Tkachov
2015-08-17 16:23 ` Andrew Pinski
2015-08-18 16:18 ` Kyrill Tkachov
2015-08-16 16:42 ` Andreas Schwab
2015-08-17 2:57 ` Alexandre Oliva
2015-08-17 8:23 ` Andreas Schwab
2015-08-17 9:21 ` Andreas Schwab
2015-08-17 11:58 ` Alexandre Oliva
2015-08-17 7:48 ` Christophe Lyon
2015-08-17 12:43 ` Alexandre Oliva
2015-08-17 13:39 ` Christophe Lyon
2015-08-18 6:53 ` Alexandre Oliva
2015-08-19 6:50 ` Alexandre Oliva
2015-08-19 10:17 ` Richard Biener
2015-08-19 13:35 ` Andreas Schwab
2015-08-19 13:45 ` Andreas Schwab
2015-08-19 17:48 ` Alexandre Oliva
2015-08-20 1:44 ` Alexandre Oliva
2015-08-20 17:03 ` Jeff Law
2015-08-21 7:57 ` Alexandre Oliva
2015-08-21 8:38 ` Richard Biener
2015-08-21 12:17 ` Andreas Schwab
2015-08-21 8:11 ` Alexandre Oliva
2015-08-21 8:37 ` Richard Biener
2015-09-02 17:09 ` Alan Lawrence
2015-09-02 22:34 ` Alexandre Oliva
2015-09-03 10:58 ` Alan Lawrence
2015-09-18 15:49 ` Alan Lawrence
2015-09-23 20:44 ` Alexandre Oliva
2015-09-25 11:39 ` Richard Biener
2015-09-29 11:31 ` Szabolcs Nagy
2015-10-07 22:37 ` Alexandre Oliva
2015-10-08 10:00 ` Richard Biener
2015-10-09 21:10 ` Jeff Law
2015-11-05 5:09 ` Alexandre Oliva
2015-11-05 13:44 ` Richard Biener
2015-11-10 15:31 ` Alan Lawrence
2015-11-10 22:59 ` Alexandre Oliva
2015-11-10 23:43 ` Jeff Law
2015-11-11 18:10 ` Alexandre Oliva
2015-11-13 6:33 ` Jeff Law
2015-11-17 0:07 ` Alexandre Oliva
2015-11-24 5:41 ` Jeff Law
2015-07-24 18:21 ` Alexandre Oliva
2015-07-29 20:32 ` Alexandre Oliva
2015-04-29 3:51 ` Jeff Law
2015-03-31 6:55 ` Steven Bosscher
2015-03-31 13:30 ` Richard Biener
2015-03-31 14:06 ` Richard Biener
2015-04-03 13:30 ` Alexandre Oliva
2015-04-06 15:57 ` Jeff Law
2015-12-04 12:45 ` Dominik Vogt
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='CAGWvny=xVM3tLG0yzY9T86cw35iswN8=ChWmpZb07W0gAa64tw@mail.gmail.com' \
--to=dje.gcc@gmail.com \
--cc=aoliva@redhat.com \
--cc=christophe.lyon@linaro.org \
--cc=ebotcazou@adacore.com \
--cc=gcc-patches@gcc.gnu.org \
--cc=meissner@linux.vnet.ibm.com \
--cc=wschmidt@linux.vnet.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).