public inbox for gcc-patches@gcc.gnu.org
 help / color / mirror / Atom feed
From: "Bin.Cheng" <amker.cheng@gmail.com>
To: "Martin Liška" <mliska@suse.cz>
Cc: Richard Biener <richard.guenther@gmail.com>,
	GCC Patches <gcc-patches@gcc.gnu.org>,
		Jan Hubicka <hubicka@ucw.cz>
Subject: Re: [PATCH 3/3] Enhance dumps of IVOPTS
Date: Fri, 13 May 2016 09:43:00 -0000	[thread overview]
Message-ID: <CAHFci29KbfhM=oekZxEJwPiyffU_cwQt=16dTz1SEJX6tBo+iw@mail.gmail.com> (raw)
In-Reply-To: <5734B256.7080002@suse.cz>

On Thu, May 12, 2016 at 5:41 PM, Martin Liška <mliska@suse.cz> wrote:
> On 05/12/2016 03:51 PM, Bin.Cheng wrote:
>> On Thu, May 12, 2016 at 1:13 PM, Martin Liška <mliska@suse.cz> wrote:
>>> On 05/10/2016 03:16 PM, Bin.Cheng wrote:
>>>> Another way is to remove the use of id for struct iv_inv_expr_ent once
>>>> for all.  We can change iv_ca.used_inv_expr and cost_pair.inv_expr_id
>>>> to pointers, and rename iv_inv_expr_ent.id to count and use this to
>>>> record reference number in iv_ca.  This if-statement on dump_file can
>>>> be saved.  Also I think it simplifies current code a bit.  For now,
>>>> there are id <-> struct maps for different structures in IVOPT which
>>>> make it not straightforward.
>>>
>>> Hi.
>>>
>>> I'm sending second version of the patch. I tried to follow your advices, but
>>> because of a iv_inv_expr_ent can simultaneously belong to multiply iv_cas,
>>> putting counter to iv_inv_expr_ent does not works. Instead of that, I've
>>> decided to replace used_inv_expr with a hash_map that contains used inv_exps
>>> and where value of the map is # of usages.
>>>
>>> Further questions:
>>> + iv_inv_expr_ent::id can be now removed as it's used just for purpose of dumps
>>> Group 0:
>>>   cand  cost    scaled  freq    compl.  depends on
>>>   5     2       2.00    1.000
>>>   6     4       4.00    1.001    inv_expr:0
>>>   7     4       4.00    1.001    inv_expr:1
>>>   8     4       4.00    1.001    inv_expr:2
>>>
>>> That can be replaced with print_generic_expr, but I think using ids makes the dump
>>> output more clear.
>> I am okay with keeping id.  Could you please dump all inv_exprs in a
>> single section like
>> <Invariant Exprs>:
>> inv_expr 0: print_generic_expr
>> inv_expr 1: ...
>>
>> Then only dump the id afterwards?
>>
>
> Sure, it would be definitely better:
>
> The new dump format looks:
>
> <Invariant Expressions>:
> inv_expr 0:     sudoku_351(D) + (sizetype) S.833_774 * 4
> inv_expr 1:     sudoku_351(D) + ((sizetype) S.833_774 * 4 + 18446744073709551580)
> inv_expr 2:     sudoku_351(D) + ((sizetype) S.833_774 + 72) * 4
> inv_expr 3:     sudoku_351(D) + ((sizetype) S.833_774 + 81) * 4
> inv_expr 4:     &A.832 + (sizetype) _377 * 4
> inv_expr 5:     &A.832 + ((sizetype) _377 * 4 + 18446744073709551612)
> inv_expr 6:     &A.832 + ((sizetype) _377 + 8) * 4
> inv_expr 7:     &A.832 + ((sizetype) _377 + 9) * 4
>
> <Group-candidate Costs>:
> Group 0:
>   cand  cost    scaled  freq    compl.  depends on
>
> ...
>
> Improved to:
>   cost: 27 (complexity 2)
>   cand_cost: 11
>   cand_group_cost: 10 (complexity 2)
>   candidates: 3, 5
>    group:0 --> iv_cand:5, cost=(2,0)
>    group:1 --> iv_cand:5, cost=(4,1)
>    group:2 --> iv_cand:5, cost=(4,1)
>    group:3 --> iv_cand:3, cost=(0,0)
>    group:4 --> iv_cand:3, cost=(0,0)
>   invariants 1, 6
>   invariant expressions 6, 3
>
> The only question here is that as used_inv_exprs are stored in a hash_map,
> order of dumped invariants would not be stable. Is it problem?
It is okay.

Only nitpicking on this version.

>
>>>
>>> + As check_GNU_style.sh reported multiple 8 spaces issues in hunks I've touched, I decided
>>> to fix all 8 spaces issues. Hope it's fine.
>>>
>>> I'm going to test the patch.
>>> Thoughts?
>>
>> Some comments on the patch embedded.
>>
>>>
>>> +/* Forward declaration.  */
>> Not necessary.
>>> +struct iv_inv_expr_ent;
>>> +
>
> I think it's needed because struct cost_pair uses a pointer to iv_inv_expr_ent.
I mean the comment, clearly the declaration is self-documented.

> @@ -6000,11 +6045,12 @@ iv_ca_set_no_cp (struct ivopts_data *data, struct iv_ca *ivs,
>
>    iv_ca_set_remove_invariants (ivs, cp->depends_on);
>
> -  if (cp->inv_expr_id != -1)
> +  if (cp->inv_expr != NULL)
>      {
> -      ivs->used_inv_expr[cp->inv_expr_id]--;
> -      if (ivs->used_inv_expr[cp->inv_expr_id] == 0)
> -        ivs->num_used_inv_expr--;
> +      unsigned *slot = ivs->used_inv_exprs->get (cp->inv_expr);
> +      --(*slot);
> +      if (*slot == 0)
> +    ivs->used_inv_exprs->remove (cp->inv_expr);
I suppose insertion/removal of hash_map are not expensive?  Because
the algorithm causes a lot of these operations.

> @@ -6324,12 +6368,26 @@ iv_ca_dump (struct ivopts_data *data, FILE *file, struct iv_ca *ivs)
>      fprintf (file, "   group:%d --> ??\n", group->id);
>      }
>
> +  bool any_invariant = false;
>    for (i = 1; i <= data->max_inv_id; i++)
>      if (ivs->n_invariant_uses[i])
>        {
> +    const char *pref = any_invariant ? ", " : "  invariants ";
> +    any_invariant = true;
>      fprintf (file, "%s%d", pref, i);
> -    pref = ", ";
>        }
> +
> +  if (any_invariant)
> +    fprintf (file, "\n");
> +
To make dump easier to read, we can simply dump invariant
variables/expressions unconditionally.  Also keep invariant variables
and expressions in the same form.
   const char *pref = "";
   //...
   fprintf (file, "  invariant variables: "
   for (i = 1; i <= data->max_inv_id; i++)
     if (ivs->n_invariant_uses[i])
       {
     fprintf (file, "%s%d", pref, i);
    pref = ", ";
       }
   fprintf (file, "\n");

> +  const char *pref = "  invariant expressions ";
> +  for (hash_map<iv_inv_expr_ent *, unsigned>::iterator it
> +       = ivs->used_inv_exprs->begin (); it != ivs->used_inv_exprs->end (); ++it)
> +    {
> +    fprintf (file, "%s%d", pref, (*it).first->id);
> +    pref = ", ";
> +    }
> +
>    fprintf (file, "\n\n");
>  }
>

Okay with the dump change,  you may need to update Changelog entry too.

Thanks,
bin

  reply	other threads:[~2016-05-13  9:43 UTC|newest]

Thread overview: 34+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-04-29 11:58 [PATCH 0/3] IVOPTS: support profiling marxin
2016-04-29 11:58 ` [PATCH 1/3] Encapsulate comp_cost within a class with methods marxin
2016-05-16 10:14   ` Bin.Cheng
2016-05-16 13:55     ` Martin Liška
2016-05-19 10:23       ` Martin Liška
2016-05-19 11:24         ` Bin.Cheng
2016-05-26 21:02           ` Martin Liška
2016-04-29 11:58 ` [PATCH 2/3] Add profiling support for IVOPTS marxin
2016-05-16 13:56   ` Martin Liška
2016-05-16 22:27     ` Bin.Cheng
2016-05-19 10:28       ` Martin Liška
2016-05-20 10:04         ` Bin.Cheng
2016-05-24 10:19         ` Bin.Cheng
2016-05-24 10:33           ` Bin.Cheng
2016-05-24 11:01           ` Bin.Cheng
2016-05-30 19:51           ` Martin Liška
2016-04-29 11:58 ` [PATCH 3/3] Enhance dumps of IVOPTS marxin
2016-05-06  9:19   ` Martin Liška
2016-05-09  9:47     ` Richard Biener
2016-05-10 13:16       ` Bin.Cheng
2016-05-11 14:18         ` Martin Liška
2016-05-12 12:14         ` Martin Liška
2016-05-12 13:51           ` Bin.Cheng
2016-05-12 16:42             ` Martin Liška
2016-05-13  9:43               ` Bin.Cheng [this message]
2016-05-13 10:44                 ` Martin Liška
2016-05-13 12:12                   ` H.J. Lu
2016-05-13 12:39                     ` Martin Liška
2016-05-13 12:44                       ` Kyrill Tkachov
2016-05-13 12:47                         ` Richard Biener
2016-05-13 12:51                           ` Martin Liška
2016-05-13 14:17                             ` H.J. Lu
2016-05-13 14:46                               ` H.J. Lu
2016-05-03  9:28 ` [PATCH 0/3] IVOPTS: support profiling Bin.Cheng

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to='CAHFci29KbfhM=oekZxEJwPiyffU_cwQt=16dTz1SEJX6tBo+iw@mail.gmail.com' \
    --to=amker.cheng@gmail.com \
    --cc=gcc-patches@gcc.gnu.org \
    --cc=hubicka@ucw.cz \
    --cc=mliska@suse.cz \
    --cc=richard.guenther@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).