From: Ramana Radhakrishnan <ramana.gcc@googlemail.com>
To: Christophe Lyon <christophe.lyon@linaro.org>,
gcc Patches <gcc-patches@gcc.gnu.org>,
Kyrylo Tkachov <kyrylo.tkachov@arm.com>,
richard.sandiford@arm.com
Subject: Re: [PATCH][armeb] PR 91060 gcc.c-torture/execute/scal-to-vec1.c fails since r272843
Date: Wed, 10 Jul 2019 11:25:00 -0000 [thread overview]
Message-ID: <CAJA7tRZR2_ET6cK_cLBR9y86DFm8yhK42dWCNEzE02=0MBHm7g@mail.gmail.com> (raw)
In-Reply-To: <mptimsap5j6.fsf@arm.com>
On Wed, Jul 10, 2019 at 11:07 AM Richard Sandiford
<richard.sandiford@arm.com> wrote:
>
> Christophe Lyon <christophe.lyon@linaro.org> writes:
> > On Mon, 8 Jul 2019 at 11:04, Richard Sandiford
> > <richard.sandiford@arm.com> wrote:
> >>
> >> Christophe Lyon <christophe.lyon@linaro.org> writes:
> >> > Hi,
> >> >
> >> > This patch fixes PR 91060 where the lane ordering was no longer the
> >> > right one (GCC's vs architecture's).
> >>
> >> Sorry, we clashed :-)
> >>
> >> I'd prefer to go with the version I attached to bugzilla just now.
> >
> > Yes just saw that, thanks!
>
> The bugzilla version didn't properly adjust vec_setv2di_internal.
> Fixed with the version below, tested on armeb-eabi.
>
> Besides gcc.c-torture/execute/scal-to-vec*.c, the patch also fixes:
>
> c-c++-common/torture/vector-compare-1.c
> gcc.target/arm/pr69614.c
> g++.dg/ext/vector37.C
>
> OK for trunk?
OK.
Ramana
>
> Richard
>
>
> 2019-07-10 Richard Sandiford <richard.sandiford@arm.com>
>
> gcc/
> PR target/91060
> * config/arm/iterators.md (V2DI_ONLY): New mode iterator.
> * config/arm/neon.md (vec_set<mode>_internal): Add a '@' prefix.
> (vec_setv2di_internal): Reexpress as...
> (@vec_set<V2DI_ONLY:mode>_internal): ...this.
> * config/arm/arm.c (neon_expand_vector_init): Use gen_vec_set_internal
> rather than gen_neon_vset_lane<mode>.
>
> Index: gcc/config/arm/iterators.md
> ===================================================================
> --- gcc/config/arm/iterators.md 2019-06-18 09:35:55.377865698 +0100
> +++ gcc/config/arm/iterators.md 2019-07-10 11:01:57.990749932 +0100
> @@ -186,6 +186,9 @@ (define_mode_iterator VX [V8QI V4HI V16Q
> ;; Modes with 8-bit elements.
> (define_mode_iterator VE [V8QI V16QI])
>
> +;; V2DI only (for use with @ patterns).
> +(define_mode_iterator V2DI_ONLY [V2DI])
> +
> ;; Modes with 64-bit elements only.
> (define_mode_iterator V64 [DI V2DI])
>
> Index: gcc/config/arm/neon.md
> ===================================================================
> --- gcc/config/arm/neon.md 2019-07-01 09:37:07.220524486 +0100
> +++ gcc/config/arm/neon.md 2019-07-10 11:01:57.990749932 +0100
> @@ -319,7 +319,7 @@ (define_insn "*movmisalign<mode>_neon_lo
> "vld1.<V_sz_elem>\t{%q0}, %A1"
> [(set_attr "type" "neon_load1_1reg<q>")])
>
> -(define_insn "vec_set<mode>_internal"
> +(define_insn "@vec_set<mode>_internal"
> [(set (match_operand:VD_LANE 0 "s_register_operand" "=w,w")
> (vec_merge:VD_LANE
> (vec_duplicate:VD_LANE
> @@ -340,7 +340,7 @@ (define_insn "vec_set<mode>_internal"
> }
> [(set_attr "type" "neon_load1_all_lanes<q>,neon_from_gp<q>")])
>
> -(define_insn "vec_set<mode>_internal"
> +(define_insn "@vec_set<mode>_internal"
> [(set (match_operand:VQ2 0 "s_register_operand" "=w,w")
> (vec_merge:VQ2
> (vec_duplicate:VQ2
> @@ -369,12 +369,12 @@ (define_insn "vec_set<mode>_internal"
> [(set_attr "type" "neon_load1_all_lanes<q>,neon_from_gp<q>")]
> )
>
> -(define_insn "vec_setv2di_internal"
> - [(set (match_operand:V2DI 0 "s_register_operand" "=w,w")
> - (vec_merge:V2DI
> - (vec_duplicate:V2DI
> +(define_insn "@vec_set<mode>_internal"
> + [(set (match_operand:V2DI_ONLY 0 "s_register_operand" "=w,w")
> + (vec_merge:V2DI_ONLY
> + (vec_duplicate:V2DI_ONLY
> (match_operand:DI 1 "nonimmediate_operand" "Um,r"))
> - (match_operand:V2DI 3 "s_register_operand" "0,0")
> + (match_operand:V2DI_ONLY 3 "s_register_operand" "0,0")
> (match_operand:SI 2 "immediate_operand" "i,i")))]
> "TARGET_NEON"
> {
> Index: gcc/config/arm/arm.c
> ===================================================================
> --- gcc/config/arm/arm.c 2019-07-01 09:37:07.220524486 +0100
> +++ gcc/config/arm/arm.c 2019-07-10 11:01:57.990749932 +0100
> @@ -12471,7 +12471,7 @@ neon_expand_vector_init (rtx target, rtx
> if (n_var == 1)
> {
> rtx copy = copy_rtx (vals);
> - rtx index = GEN_INT (one_var);
> + rtx merge_mask = GEN_INT (1 << one_var);
>
> /* Load constant part of vector, substitute neighboring value for
> varying element. */
> @@ -12480,38 +12480,7 @@ neon_expand_vector_init (rtx target, rtx
>
> /* Insert variable. */
> x = copy_to_mode_reg (inner_mode, XVECEXP (vals, 0, one_var));
> - switch (mode)
> - {
> - case E_V8QImode:
> - emit_insn (gen_neon_vset_lanev8qi (target, x, target, index));
> - break;
> - case E_V16QImode:
> - emit_insn (gen_neon_vset_lanev16qi (target, x, target, index));
> - break;
> - case E_V4HImode:
> - emit_insn (gen_neon_vset_lanev4hi (target, x, target, index));
> - break;
> - case E_V8HImode:
> - emit_insn (gen_neon_vset_lanev8hi (target, x, target, index));
> - break;
> - case E_V2SImode:
> - emit_insn (gen_neon_vset_lanev2si (target, x, target, index));
> - break;
> - case E_V4SImode:
> - emit_insn (gen_neon_vset_lanev4si (target, x, target, index));
> - break;
> - case E_V2SFmode:
> - emit_insn (gen_neon_vset_lanev2sf (target, x, target, index));
> - break;
> - case E_V4SFmode:
> - emit_insn (gen_neon_vset_lanev4sf (target, x, target, index));
> - break;
> - case E_V2DImode:
> - emit_insn (gen_neon_vset_lanev2di (target, x, target, index));
> - break;
> - default:
> - gcc_unreachable ();
> - }
> + emit_insn (gen_vec_set_internal (mode, target, x, merge_mask, target));
> return;
> }
>
next prev parent reply other threads:[~2019-07-10 11:25 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-07-08 9:04 Christophe Lyon
2019-07-08 9:06 ` Richard Sandiford
2019-07-08 9:10 ` Christophe Lyon
2019-07-10 10:20 ` Richard Sandiford
2019-07-10 11:25 ` Ramana Radhakrishnan [this message]
2019-07-08 9:09 ` Kyrill Tkachov
2019-07-08 9:16 ` Christophe Lyon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='CAJA7tRZR2_ET6cK_cLBR9y86DFm8yhK42dWCNEzE02=0MBHm7g@mail.gmail.com' \
--to=ramana.gcc@googlemail.com \
--cc=christophe.lyon@linaro.org \
--cc=gcc-patches@gcc.gnu.org \
--cc=kyrylo.tkachov@arm.com \
--cc=richard.sandiford@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).