Thanks for the feedback. Here's the updated pattern: /* X - (X - Y) --> Y */ (simplify (minus (convert1? @0) (convert2? (minus@2 (convert3? @@0) @1))) (if (ANY_INTEGRAL_TYPE_P (type) && TYPE_OVERFLOW_UNDEFINED(type) && !TYPE_OVERFLOW_SANITIZED(type) && ANY_INTEGRAL_TYPE_P (TREE_TYPE(@2)) && TYPE_OVERFLOW_UNDEFINED(TREE_TYPE(@2)) && !TYPE_OVERFLOW_SANITIZED(TREE_TYPE(@2)) && ANY_INTEGRAL_TYPE_P (TREE_TYPE(@0)) && TYPE_OVERFLOW_UNDEFINED(TREE_TYPE(@0)) && !TYPE_OVERFLOW_SANITIZED(TREE_TYPE(@0)) && TYPE_PRECISION (TREE_TYPE (@2)) <= TYPE_PRECISION (type) && TYPE_PRECISION (TREE_TYPE (@0)) <= TYPE_PRECISION (type)) (convert @1))) I kept the TYPE_OVERFLOW_SANITIZED checks because I saw other patterns that leverage undefined overflows check for it. I think this new pattern shouldn't be applied if overflow sanitizer checks are enabled. >> why is this testing TREE_TYPE (@0)? I'm checking the type of @0 because I'm concerned that there could be a case where @0's type isn't an integer type with undefined overflow. I tried creating a test case and couldn't seem to create one where this is violated but I kept the checks to avoid causing a regression. If I'm being overcautious and you feel that the type checks on @0 aren't needed, I can remove them. I think the precision check on TREE_TYPE(@0) is needed to avoid truncation cases though. >> Once we'd "inline" nop_convert genmatch would complain about this. Is someone working on inlining nop_convert? I'd like to avoid breaking someone else's work if that's being worked on right now. I've also added some extra tests to cover this new pattern. I've attached a patch with my latest changes. From: Richard Biener Sent: Wednesday, July 28, 2021 2:59 AM To: Victor Tong Cc: Marc Glisse ; gcc-patches@gcc.gnu.org Subject: Re: [EXTERNAL] Re: [PATCH] tree-optimization: Optimize division followed by multiply [PR95176]   On Tue, Jun 29, 2021 at 1:10 AM Victor Tong wrote: > > Thanks Richard and Marc. > > I wrote the following test case to compare the outputs of fn1() and fn1NoOpt() below with my extra pattern being applied. I tested the two functions with all of the integers from INT_MIN to INT_MAX. > > long > fn1 (int x) > { >   return 42L - (long)(42 - x); > } > > #pragma GCC push_options > #pragma GCC optimize ("O0") > long > fn1NoOpt (int x) > { >   volatile int y = (42 - x); >   return 42L - (long)y; > } > #pragma GCC pop_options > > int main () > { >         for (long i=INT_MIN; i<=INT_MAX;i++) >         { >                 auto valNoOpt = fn1NoOpt(i); >                 auto valOpt = fn1(i); >                 if (valNoOpt != valOpt) >                         printf("valOpt=%ld, valNoOpt=%ld\n", valOpt, valNoOpt); >         } >         return 0; > } > > I saw that the return values of fn1() and fn1NoOpt() differed when the input was between INT_MIN and INT_MIN+42 inclusive. When passing values in this range to fn1NoOpt(), a signed overflow is triggered which causes the value to differ (undefined behavior). This seems to go in line with what Marc described and I think the transformation is correct in the scenario above. I do think that type casts that result in truncation (i.e. from a higher precision to a lower one) or with unsigned types will result in an incorrect transformation so those scenarios need to be avoided. > > Given that the extra pattern I'm adding is taking advantage the undefined behavior of signed integer overflow, I'm considering keeping the existing nop_convert pattern in place and adding a new pattern to cover these new cases. I'd also like to avoid touching nop_convert given that it's used in a number of other patterns. > > This is the pattern I have currently: > >   (simplify >     (minus (convert1? @0) (convert2? (minus (convert3? @2) @1))) >     (if (operand_equal_p(@0, @2, 0) The operand_equal_p should be reflected by using @0 in place of @2. >         && INTEGRAL_TYPE_P (type) >         && TYPE_OVERFLOW_UNDEFINED(type) >         && !TYPE_OVERFLOW_SANITIZED(type) >         && INTEGRAL_TYPE_P (TREE_TYPE(@1)) >         && TYPE_OVERFLOW_UNDEFINED(TREE_TYPE(@1)) >         && !TYPE_OVERFLOW_SANITIZED(TREE_TYPE(@1)) >         && !TYPE_UNSIGNED (TREE_TYPE (@1)) >         && !TYPE_UNSIGNED (type) please group checks on common argument.  I think a single test on INTEGRAL_TYPE_P (type) is enough, it could be ANY_INTEGRAL_TYPE_P to include vector and complex types. >         && TYPE_PRECISION (TREE_TYPE (@1)) <= TYPE_PRECISION (type) >         && INTEGRAL_TYPE_P (TREE_TYPE(@0)) >         && TYPE_OVERFLOW_UNDEFINED(TREE_TYPE(@0)) why is this testing TREE_TYPE (@0)?  The outer subtract is using 'type', the inner subtract uses TREE_TYPE (@1) though you could place a capture on the minus to make what you test more obvious, like   (minus (convert1? @0) (convert2? (minus@3 (convert3? @2) @1))) TYPE_OVERFLOW_UNDEFINED (TREE_TYPE (@3)) there's one set of checks too much I think. >         && !TYPE_OVERFLOW_SANITIZED(TREE_TYPE(@0)) >         && !TYPE_UNSIGNED (TREE_TYPE (@0)) we only ever have TYPE_OVERFLOW_UNDEFINED on singed types so the !TYPE_UNSIGNED checks are superfluous. >         && TYPE_PRECISION (TREE_TYPE (@0)) <= TYPE_PRECISION (type) >         && TREE_TYPE(@1) == TREE_TYPE(@2)) This check means that convert3 is never present since a MINUS requires compatible types. Sorry for the late reply. Note the pattern will necessarily be partly redundant with the   (simplify    (minus (nop_convert1? (minus (nop_convert2? @0) @1)) @0)    (if (!ANY_INTEGRAL_TYPE_P (type)         || TYPE_OVERFLOW_WRAPS (type))    (negate (view_convert @1))    (view_convert (negate @1)))) pattern.  Once we'd "inline" nop_convert genmatch would complain about this. >     (convert @1))) > > Is there a more concise/better way of writing the pattern? I was looking for similar checks in match.pd and I couldn't find anything that I could leverage. > > I also kept my pattern to the specific scenario I'm seeing with the regression to lower the risk of something breaking. I've limited @1 and @2 to have the same type. > > I'm also in favor of adding/running computer verification to make sure the transformation is legal. I've written some tests to verify that the pattern is being applied in the right scenarios and not being applied in others, but I think there are too many possibilities to manually write them all. Is there anything in GCC that can be used to verify that match.pd transformations are correct? I'm thinking of something like Alive https://nam06.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2FAliveToolkit%2Falive2&data=04%7C01%7Cvitong%40microsoft.com%7C64334bd5c79443af04ec08d951ae6117%7C72f988bf86f141af91ab2d7cd011db47%7C1%7C0%7C637630631678231097%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=x9Heq%2Bjgb%2Fy1PJFZ0gT9yfkQuzOz0rzWnZsl7VOymp0%3D&reserved=0. > > Thanks, > Victor > > > > From: Richard Biener > Sent: Monday, June 21, 2021 12:08 AM > To: Marc Glisse > Cc: Victor Tong ; gcc-patches@gcc.gnu.org > Subject: Re: [EXTERNAL] Re: [PATCH] tree-optimization: Optimize division followed by multiply [PR95176] > > On Sat, Jun 19, 2021 at 7:05 PM Marc Glisse wrote: > > > > On Fri, 18 Jun 2021, Richard Biener wrote: > > > > >> Option 2: Add a new pattern to support scenarios that the existing nop_convert pattern bails out on. > > >> > > >> Existing pattern: > > >> > > >> (simplify > > >>    (minus (nop_convert1? @0) (nop_convert2? (minus (nop_convert3? @@0) @1))) > > >>    (view_convert @1)) > > > > I tried to check with a program when > > > > T3 x; > > T1 y; > > (T2)x-(T2)((T1)x-y) > > > > can be safely replaced with > > > > (T2)y > > > > From the output, it looks like this is safe when T1 is at least as large > > as T2. It is wrong when T1 is unsigned and smaller than T2. And when T1 is > > signed and smaller than T2, it is ok if T3 is the same type as T1 (signed > > then) or has strictly less precision (any sign), and not in other cases. > > > > Note that this is when signed implies undefined overflow and unsigned > > implies wrapping, and I wouldn't put too much faith in this recently > > dusted program. And it doesn't say how to write the match.pd pattern with > > '?', "@@", disabling it if TYPE_OVERFLOW_SANITIZED, etc. > > > > Mostly, I wanted to say that if we are going to go handle more than > > nop_convert for more than just 1 or 2 easy transformations, I think some > > kind of computer verification would be useful, it would save a lot of time > > and headaches. > > True.  I wonder if auto-generating such tests from match.pd rules would > be a good project to work on (GSoC?).  When there's define_match > involved things get a little tricky, but then one item on the TODO list > is "inlining" those at the use site (exploding the decision tree even more). > > Richard. > > > (I just check by brute force all possible precisions (from 1 to 6) and > > signedness for T1, T2 and T3, all possible values for x and y, compute > > the before and after formulas, accepting if there is UB before, rejecting > > if there is UB after (and not before), and manually try to see a pattern > > in the list of types that work) > > > > -- > > Marc Glisse