From: Jerry Quinn <jlquinn@optonline.net>
To: gcc-patches@gcc.gnu.org
Subject: [PATCH] Optimization docs part 2
Date: Mon, 16 Dec 2002 22:09:00 -0000 [thread overview]
Message-ID: <E18OAtv-0000lc-00@tiamat> (raw)
This patch adds the list of -O levels that each flag is active
at. Hopefully there aren't any bugs here.
2002-12-17 Jerry Quinn <jlquinn@optonline.net>
* gcc/doc/invoke.texi (Optimization Options): List -O levels
for each optimization flag.
--- gcc/doc/invoke.texi.p2 Tue Dec 17 00:32:16 2002
+++ gcc/doc/invoke.texi Tue Dec 17 01:01:29 2002
@@ -3517,13 +3517,17 @@
the compiler normally lets arguments accumulate on the stack for several
function calls and pops them all at once.
+Disabled at levels @option{-O}, @option{-O2}, @option{-O3}, @option{-Os}.
+
@item -fforce-mem
@opindex fforce-mem
Force memory operands to be copied into registers before doing
arithmetic on them. This produces better code by making all memory
references potential common subexpressions. When they are not common
subexpressions, instruction combination should eliminate the separate
-register-load. The @option{-O2} option turns on this option.
+register-load.
+
+Enabled at levels @option{-O2}, @option{-O3}, @option{-Os}.
@item -fforce-addr
@opindex fforce-addr
@@ -3546,10 +3550,14 @@
whether a target machine supports this flag. @xref{Registers,,Register
Usage, gccint, GNU Compiler Collection (GCC) Internals}.
+Enabled at levels @option{-O}, @option{-O2}, @option{-O3}, @option{-Os}.
+
@item -foptimize-sibling-calls
@opindex foptimize-sibling-calls
Optimize sibling and tail recursive calls.
+Enabled at levels @option{-O2}, @option{-O3}, @option{-Os}.
+
@item -ftrapv
@opindex ftrapv
This option generates traps for signed overflow on addition, subtraction,
@@ -3571,6 +3579,8 @@
declared @code{static}, then the function is normally not output as
assembler code in its own right.
+Enabled at level @option{-O3}.
+
@item -finline-limit=@var{n}
@opindex finline-limit
By default, gcc limits the size of functions that can be inlined. This flag
@@ -3614,6 +3624,8 @@
linker support it. Use @option{-fno-merge-constants} to inhibit this
behavior.
+Enabled at levels @option{-O}, @option{-O2}, @option{-O3}, @option{-Os}.
+
@item -fmerge-all-constants
Attempt to merge identical constants and identical variables.
@@ -3638,6 +3650,9 @@
This option is only meaningful on architectures that support such
instructions, which include x86, PowerPC, IA-64 and S/390.
+The default is @option{-fbranch-count-reg}, enabled when
+@option{-fstrength-reduce} is enabled.
+
@item -fno-function-cse
@opindex fno-function-cse
Do not put function addresses in registers; make each instruction that
@@ -3647,6 +3662,8 @@
that alter the assembler output may be confused by the optimizations
performed when this option is not used.
+The default is @option{-ffunction-cse}
+
@item -ffast-math
@opindex ffast-math
Sets @option{-fno-math-errno}, @option{-funsafe-math-optimizations}, @*
@@ -3770,6 +3787,8 @@
Perform the optimizations of loop strength reduction and
elimination of iteration variables.
+Enabled at levels @option{-O2}, @option{-O3}, @option{-Os}.
+
@item -fthread-jumps
@opindex fthread-jumps
Perform optimizations where we check to see if a jump branches to a
@@ -3778,6 +3797,8 @@
second branch or a point immediately following it, depending on whether
the condition is known to be true or false.
+Enabled at levels @option{-O}, @option{-O2}, @option{-O3}, @option{-Os}.
+
@item -fcse-follow-jumps
@opindex fcse-follow-jumps
In common subexpression elimination, scan through jump instructions
@@ -3786,6 +3807,8 @@
@code{else} clause, CSE will follow the jump when the condition
tested is false.
+Enabled at levels @option{-O2}, @option{-O3}, @option{-Os}.
+
@item -fcse-skip-blocks
@opindex fcse-skip-blocks
This is similar to @option{-fcse-follow-jumps}, but causes CSE to
@@ -3794,15 +3817,21 @@
@option{-fcse-skip-blocks} causes CSE to follow the jump around the
body of the @code{if}.
+Enabled at levels @option{-O2}, @option{-O3}, @option{-Os}.
+
@item -frerun-cse-after-loop
@opindex frerun-cse-after-loop
Re-run common subexpression elimination after loop optimizations has been
performed.
+Enabled at levels @option{-O2}, @option{-O3}, @option{-Os}.
+
@item -frerun-loop-opt
@opindex frerun-loop-opt
Run the loop optimizer twice.
+Enabled at levels @option{-O2}, @option{-O3}, @option{-Os}.
+
@item -fgcse
@opindex fgcse
Perform a global common subexpression elimination pass.
@@ -3813,6 +3842,8 @@
the global common subexpression elimination pass by adding
@option{-fno-gcse} to the command line.
+Enabled at levels @option{-O2}, @option{-O3}, @option{-Os}.
+
@item -fgcse-lm
@opindex fgcse-lm
When @option{-fgcse-lm} is enabled, global common subexpression elimination will
@@ -3820,6 +3851,8 @@
allows a loop containing a load/store sequence to be changed to a load outside
the loop, and a copy/store within the loop.
+Enabled by default when gcse is enabled.
+
@item -fgcse-sm
@opindex fgcse-sm
When @option{-fgcse-sm} is enabled, A store motion pass is run after global common
@@ -3827,17 +3860,23 @@
When used in conjunction with @option{-fgcse-lm}, loops containing a load/store sequence
can be changed to a load before the loop and a store after the loop.
+Enabled by default when gcse is enabled.
+
@item -floop-optimize
@opindex floop-optimize
Perform loop optimizations: move constant expressions out of loops, simplify
exit test conditions and optionally do strength-reduction and loop unrolling as
well.
+Enabled at levels @option{-O}, @option{-O2}, @option{-O3}, @option{-Os}.
+
@item -fcrossjumping
@opindex crossjumping
Perform cross-jumping transformation. This transformation unifies equivalent code and save code size. The
resulting code may or may not perform better than without cross-jumping.
+Enabled at levels @option{-O}, @option{-O2}, @option{-O3}, @option{-Os}.
+
@item -fif-conversion
@opindex if-conversion
Attempt to transform conditional jumps into branch-less equivalents. This
@@ -3845,11 +3884,15 @@
some tricks doable by standard arithmetics. The use of conditional execution
on chips where it is available is controlled by @code{if-conversion2}.
+Enabled at levels @option{-O}, @option{-O2}, @option{-O3}, @option{-Os}.
+
@item -fif-conversion2
@opindex if-conversion2
Use conditional execution (where available) to transform conditional jumps into
branch-less equivalents.
+Enabled at levels @option{-O}, @option{-O2}, @option{-O3}, @option{-Os}.
+
@item -fdelete-null-pointer-checks
@opindex fdelete-null-pointer-checks
Use global dataflow analysis to identify and eliminate useless checks
@@ -3862,10 +3905,14 @@
@option{-fno-delete-null-pointer-checks} to disable this optimization
for programs which depend on that behavior.
+Enabled at levels @option{-O2}, @option{-O3}, @option{-Os}.
+
@item -fexpensive-optimizations
@opindex fexpensive-optimizations
Perform a number of minor optimizations that are relatively expensive.
+Enabled at levels @option{-O2}, @option{-O3}, @option{-Os}.
+
@item -foptimize-register-move
@itemx -fregmove
@opindex foptimize-register-move
@@ -3873,18 +3920,21 @@
Attempt to reassign register numbers in move instructions and as
operands of other simple instructions in order to maximize the amount of
register tying. This is especially helpful on machines with two-operand
-instructions. GCC enables this optimization by default with @option{-O2}
-or higher.
+instructions.
Note @option{-fregmove} and @option{-foptimize-register-move} are the same
optimization.
+Enabled at levels @option{-O2}, @option{-O3}, @option{-Os}.
+
@item -fdelayed-branch
@opindex fdelayed-branch
If supported for the target machine, attempt to reorder instructions
to exploit instruction slots available after delayed branch
instructions.
+Enabled at levels @option{-O}, @option{-O2}, @option{-O3}, @option{-Os}.
+
@item -fschedule-insns
@opindex fschedule-insns
If supported for the target machine, attempt to reorder instructions to
@@ -3893,6 +3943,8 @@
by allowing other instructions to be issued until the result of the load
or floating point instruction is required.
+Enabled at levels @option{-O2}, @option{-O3}, @option{-Os}.
+
@item -fschedule-insns2
@opindex fschedule-insns2
Similar to @option{-fschedule-insns}, but requests an additional pass of
@@ -3900,6 +3952,8 @@
especially useful on machines with a relatively small number of
registers and where memory load instructions take more than one cycle.
+Enabled at levels @option{-O2}, @option{-O3}, @option{-Os}.
+
@item -fno-sched-interblock
@opindex fno-sched-interblock
Don't schedule instructions across basic blocks. This is normally
@@ -3956,8 +4010,7 @@
This option is always enabled by default on certain machines, usually
those which have no call-preserved registers to use instead.
-For all machines, optimization level 2 and higher enables this flag by
-default.
+Enabled at levels @option{-O2}, @option{-O3}, @option{-Os}.
@item -ftracer
@opindex ftracer
@@ -3984,6 +4037,8 @@
If supported by the target machine, generate instructions to prefetch
memory to improve the performance of loops that access large arrays.
+Disabled at level @option{-Os}.
+
@item -fmove-all-movables
@opindex fmove-all-movables
Forces all invariant computations in loops to be moved
@@ -4020,6 +4075,9 @@
are implemented in the compiler; some targets use one, some use the
other, a few use both.
+@option{-fpeephole} is enabled by default.
+@option{-fpeephole2} enabled at levels @option{-O2}, @option{-O3}, @option{-Os}.
+
@item -fbranch-probabilities
@opindex fbranch-probabilities
After running a program compiled with @option{-fprofile-arcs}
@@ -4057,11 +4115,16 @@
reduce non-determinism, possibly at the expense of inferior
optimization.
+The default is @option{-fguess-branch-probability} at levels
+@option{-O}, @option{-O2}, @option{-O3}, @option{-Os}.
+
@item -freorder-blocks
@opindex freorder-blocks
Reorder basic blocks in the compiled function in order to reduce number of
taken branches and improve code locality.
+Enabled at levels @option{-O2}, @option{-O3}, @option{-Os}.
+
@item -freorder-functions
@opindex freorder-functions
Reorder basic blocks in the compiled function in order to reduce number of
@@ -4074,6 +4137,8 @@
Also profile feedback must be available in to make this option effective. See
@option{-fprofile-arcs} for details.
+Enabled at levels @option{-O2}, @option{-O3}, @option{-Os}.
+
@item -fstrict-aliasing
@opindex fstrict-aliasing
Allows the compiler to assume the strictest aliasing rules applicable to
@@ -4119,8 +4184,7 @@
allowed to alias. For an example, see the C front-end function
@code{c_get_alias_set}.
-For all machines, optimization level 2 and higher enables this flag by
-default.
+Enabled at levels @option{-O2}, @option{-O3}, @option{-Os}.
@item -falign-functions
@itemx -falign-functions=@var{n}
@@ -4139,6 +4203,8 @@
If @var{n} is not specified, use a machine-dependent default.
+Enabled at levels @option{-O2}, @option{-O3}.
+
@item -falign-labels
@itemx -falign-labels=@var{n}
@opindex falign-labels
@@ -4153,6 +4219,8 @@
If @var{n} is not specified, use a machine-dependent default which is
very likely to be @samp{1}, meaning no alignment.
+Enabled at levels @option{-O2}, @option{-O3}.
+
@item -falign-loops
@itemx -falign-loops=@var{n}
@opindex falign-loops
@@ -4163,6 +4231,8 @@
If @var{n} is not specified, use a machine-dependent default.
+Enabled at levels @option{-O2}, @option{-O3}.
+
@item -falign-jumps
@itemx -falign-jumps=@var{n}
@opindex falign-jumps
@@ -4173,6 +4243,8 @@
If @var{n} is not specified, use a machine-dependent default.
+Enabled at levels @option{-O2}, @option{-O3}.
+
@item -fssa
@opindex fssa
Perform optimizations in static single assignment form. Each function's
@@ -4203,11 +4275,15 @@
make debugging impossible, since variables will no longer stay in
a ``home register''.
+Enabled at levels @option{-O3}.
+
@item -fno-cprop-registers
@opindex fno-cprop-registers
After register allocation and post-register allocation instruction splitting,
we perform a copy-propagation pass to try to reduce scheduling dependencies
and occasionally eliminate the copy.
+
+Disabled at levels @option{-O}, @option{-O2}, @option{-O3}, @option{-Os}.
@item --param @var{name}=@var{value}
@opindex param
next reply other threads:[~2002-12-17 6:09 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-12-16 22:09 Jerry Quinn [this message]
-- strict thread matches above, loose matches on Subject: below --
2002-08-30 8:50 [PATCH] optimization " Jerome L Quinn
2002-09-16 10:39 ` Geoff Keating
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=E18OAtv-0000lc-00@tiamat \
--to=jlquinn@optonline.net \
--cc=gcc-patches@gcc.gnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).