From: Tamar Christina <Tamar.Christina@arm.com>
To: Richard Sandiford <Richard.Sandiford@arm.com>
Cc: "gcc-patches@gcc.gnu.org" <gcc-patches@gcc.gnu.org>,
nd <nd@arm.com>, Richard Earnshaw <Richard.Earnshaw@arm.com>,
Marcus Shawcroft <Marcus.Shawcroft@arm.com>,
Kyrylo Tkachov <Kyrylo.Tkachov@arm.com>
Subject: RE: [PATCH 2/2]AArch64 Perform more late folding of reg moves and shifts which arrive after expand
Date: Thu, 1 Dec 2022 16:25:10 +0000 [thread overview]
Message-ID: <VI1PR08MB5325D059C557F68F8A9E27C4FF149@VI1PR08MB5325.eurprd08.prod.outlook.com> (raw)
In-Reply-To: <mpty1sdkxj3.fsf@arm.com>
[-- Attachment #1: Type: text/plain, Size: 11934 bytes --]
> -----Original Message-----
> From: Richard Sandiford <richard.sandiford@arm.com>
> Sent: Monday, November 14, 2022 9:59 PM
> To: Tamar Christina <Tamar.Christina@arm.com>
> Cc: gcc-patches@gcc.gnu.org; nd <nd@arm.com>; Richard Earnshaw
> <Richard.Earnshaw@arm.com>; Marcus Shawcroft
> <Marcus.Shawcroft@arm.com>; Kyrylo Tkachov <Kyrylo.Tkachov@arm.com>
> Subject: Re: [PATCH 2/2]AArch64 Perform more late folding of reg moves
> and shifts which arrive after expand
>
> (Sorry, immediately following up to myself for a second time recently.)
>
> Richard Sandiford <richard.sandiford@arm.com> writes:
> > Tamar Christina <Tamar.Christina@arm.com> writes:
> >>>
> >>> The same thing ought to work for smov, so it would be good to do both.
> >>> That would also make the split between the original and new patterns
> >>> more
> >>> obvious: left shift for the old pattern, right shift for the new pattern.
> >>>
> >>
> >> Done, though because umov can do multilevel extensions I couldn't
> >> combine them Into a single pattern.
> >
> > Hmm, but the pattern is:
> >
> > (define_insn "*<optab>si3_insn2_uxtw"
> > [(set (match_operand:GPI 0 "register_operand" "=r,r,r")
> > (zero_extend:GPI (LSHIFTRT_ONLY:SI
> > (match_operand:SI 1 "register_operand" "w,r,r")
> > (match_operand:QI 2 "aarch64_reg_or_shift_imm_si"
> "Usl,Uss,r"))))]
> >
> > GPI is just SI or DI, so in the SI case we're zero-extending SI to SI,
> > which isn't a valid operation. The original patch was just for
> > extending to DI, which seems correct. The choice between printing %x
> > for smov and %w for umov can then depend on the code.
You're right, GPI made no sense here. Fixed.
>
> My original comment quoted above was about using smov in the zero-
> extend pattern. I.e. the original:
>
> (define_insn "*<optab>si3_insn2_uxtw"
> [(set (match_operand:DI 0 "register_operand" "=r,?r,r")
> (zero_extend:DI (LSHIFTRT:SI
> (match_operand:SI 1 "register_operand" "w,r,r")
> (match_operand:QI 2 "aarch64_reg_or_shift_imm_si"
> "Usl,Uss,r"))))]
>
> could instead be:
>
> (define_insn "*<optab>si3_insn2_uxtw"
> [(set (match_operand:DI 0 "register_operand" "=r,?r,r")
> (zero_extend:DI (SHIFTRT:SI
> (match_operand:SI 1 "register_operand" "w,r,r")
> (match_operand:QI 2 "aarch64_reg_or_shift_imm_si"
> "Usl,Uss,r"))))]
>
> with the pattern using "smov %w0, ..." for ashiftft case.
Almost, except the none immediate cases don't work with shifts.
i.e. a right shift can't be used to sign extend from 32 to 64 bits.
I've merged the cases but added a guard for this.
Bootstrapped Regtested on aarch64-none-linux-gnu and no issues.
Ok for master?
Thanks,
Tamar
gcc/ChangeLog:
* config/aarch64/aarch64.md (*<optab>si3_insn_uxtw): Split SHIFT into
left and right ones.
(*aarch64_ashr_sisd_or_int_<mode>3): Support smov.
(*<optab>si3_insn2_<sra_op>xtw): New.
* config/aarch64/constraints.md (Usl): New.
* config/aarch64/iterators.md (is_zeroE, extend_op): New.
gcc/testsuite/ChangeLog:
* gcc.target/aarch64/shift-read_1.c: New test.
* gcc.target/aarch64/shift-read_2.c: New test.
--- inline copy of patch ---
diff --git a/gcc/config/aarch64/aarch64.md b/gcc/config/aarch64/aarch64.md
index 39e65979528fb7f748ed456399ca38f929dba1d4..4c181a96e555c2a58c59fc991000b2a2fa9bd244 100644
--- a/gcc/config/aarch64/aarch64.md
+++ b/gcc/config/aarch64/aarch64.md
@@ -5425,20 +5425,42 @@ (define_split
;; Arithmetic right shift using SISD or Integer instruction
(define_insn "*aarch64_ashr_sisd_or_int_<mode>3"
- [(set (match_operand:GPI 0 "register_operand" "=r,r,w,&w,&w")
+ [(set (match_operand:GPI 0 "register_operand" "=r,r,w,r,&w,&w")
(ashiftrt:GPI
- (match_operand:GPI 1 "register_operand" "r,r,w,w,w")
+ (match_operand:GPI 1 "register_operand" "r,r,w,w,w,w")
(match_operand:QI 2 "aarch64_reg_or_shift_imm_di"
- "Us<cmode>,r,Us<cmode_simd>,w,0")))]
+ "Us<cmode>,r,Us<cmode_simd>,Usl,w,0")))]
""
- "@
- asr\t%<w>0, %<w>1, %2
- asr\t%<w>0, %<w>1, %<w>2
- sshr\t%<rtn>0<vas>, %<rtn>1<vas>, %2
- #
- #"
- [(set_attr "type" "bfx,shift_reg,neon_shift_imm<q>,neon_shift_reg<q>,neon_shift_reg<q>")
- (set_attr "arch" "*,*,simd,simd,simd")]
+ {
+ switch (which_alternative)
+ {
+ case 0:
+ return "asr\t%<w>0, %<w>1, %2";
+ case 1:
+ return "asr\t%<w>0, %<w>1, %<w>2";
+ case 2:
+ return "sshr\t%<rtn>0<vas>, %<rtn>1<vas>, %2";
+ case 3:
+ {
+ int val = INTVAL (operands[2]);
+ int size = 32 - val;
+
+ if (size == 16)
+ return "smov\\t%<w>0, %1.h[1]";
+ if (size == 8)
+ return "smov\\t%<w>0, %1.b[3]";
+ gcc_unreachable ();
+ }
+ case 4:
+ return "#";
+ case 5:
+ return "#";
+ default:
+ gcc_unreachable ();
+ }
+ }
+ [(set_attr "type" "bfx,shift_reg,neon_shift_imm<q>,neon_to_gp, neon_shift_reg<q>,neon_shift_reg<q>")
+ (set_attr "arch" "*,*,simd,simd,simd,simd")]
)
(define_split
@@ -5548,7 +5570,7 @@ (define_insn "*rol<mode>3_insn"
;; zero_extend version of shifts
(define_insn "*<optab>si3_insn_uxtw"
[(set (match_operand:DI 0 "register_operand" "=r,r")
- (zero_extend:DI (SHIFT_no_rotate:SI
+ (zero_extend:DI (SHIFT_arith:SI
(match_operand:SI 1 "register_operand" "r,r")
(match_operand:QI 2 "aarch64_reg_or_shift_imm_si" "Uss,r"))))]
""
@@ -5583,6 +5605,37 @@ (define_insn "*rolsi3_insn_uxtw"
[(set_attr "type" "rotate_imm")]
)
+(define_insn "*<optab>si3_insn2_<sra_op>xtw"
+ [(set (match_operand:DI 0 "register_operand" "=r,r,r")
+ (<extend_op>:DI (SHIFTRT:SI
+ (match_operand:SI 1 "register_operand" "w,r,r")
+ (match_operand:QI 2 "aarch64_reg_or_shift_imm_si" "Usl,Uss,r"))))]
+ "<is_zeroE> || satisfies_constraint_Usl (operands[2])"
+ {
+ switch (which_alternative)
+ {
+ case 0:
+ {
+ int val = INTVAL (operands[2]);
+ int size = 32 - val;
+
+ if (size == 16)
+ return "<sra_op>mov\\t%x0, %1.h[1]";
+ if (size == 8)
+ return "<sra_op>mov\\t%x0, %1.b[3]";
+ gcc_unreachable ();
+ }
+ case 1:
+ return "<shift>\\t%w0, %w1, %2";
+ case 2:
+ return "<shift>\\t%w0, %w1, %w2";
+ default:
+ gcc_unreachable ();
+ }
+ }
+ [(set_attr "type" "neon_to_gp,bfx,shift_reg")]
+)
+
(define_insn "*<optab><mode>3_insn"
[(set (match_operand:SHORT 0 "register_operand" "=r")
(ASHIFT:SHORT (match_operand:SHORT 1 "register_operand" "r")
diff --git a/gcc/config/aarch64/constraints.md b/gcc/config/aarch64/constraints.md
index 29efb6c0cff7574c9b239ef358acaca96dd75d03..c2a696cb77f49cae23239b0ed8a8aa5168f8898c 100644
--- a/gcc/config/aarch64/constraints.md
+++ b/gcc/config/aarch64/constraints.md
@@ -171,6 +171,14 @@ (define_constraint "Uss"
(and (match_code "const_int")
(match_test "(unsigned HOST_WIDE_INT) ival < 32")))
+(define_constraint "Usl"
+ "@internal
+ A constraint that matches an immediate shift constant in SImode that has an
+ exact mode available to use."
+ (and (match_code "const_int")
+ (and (match_test "satisfies_constraint_Uss (op)")
+ (match_test "(32 - ival == 8) || (32 - ival == 16)"))))
+
(define_constraint "Usn"
"A constant that can be used with a CCMN operation (once negated)."
(and (match_code "const_int")
diff --git a/gcc/config/aarch64/iterators.md b/gcc/config/aarch64/iterators.md
index 7c69b124f076b4fb2540241f287c6999c32123c1..df72c079f218db9727a96924cab496e91ce6df59 100644
--- a/gcc/config/aarch64/iterators.md
+++ b/gcc/config/aarch64/iterators.md
@@ -2149,8 +2149,8 @@ (define_mode_attr sve_lane_pair_con [(VNx8HF "y") (VNx4SF "x")])
;; This code iterator allows the various shifts supported on the core
(define_code_iterator SHIFT [ashift ashiftrt lshiftrt rotatert rotate])
-;; This code iterator allows all shifts except for rotates.
-(define_code_iterator SHIFT_no_rotate [ashift ashiftrt lshiftrt])
+;; This code iterator allows arithmetic shifts
+(define_code_iterator SHIFT_arith [ashift ashiftrt])
;; This code iterator allows the shifts supported in arithmetic instructions
(define_code_iterator ASHIFT [ashift ashiftrt lshiftrt])
@@ -2378,9 +2378,18 @@ (define_code_attr shift [(ashift "lsl") (ashiftrt "asr")
(define_code_attr is_rotl [(ashift "0") (ashiftrt "0")
(lshiftrt "0") (rotatert "0") (rotate "1")])
+;; True if zero extending operation or not
+(define_code_attr is_zeroE [(ashift "false") (ashiftrt "false")
+ (lshiftrt "true")])
+
+
;; Op prefix for shift right and accumulate.
(define_code_attr sra_op [(ashiftrt "s") (lshiftrt "u")])
+;; Extensions that can be performed with Op
+(define_code_attr extend_op [(ashiftrt "sign_extend")
+ (lshiftrt "zero_extend")])
+
;; op prefix for shift right and narrow.
(define_code_attr srn_op [(ashiftrt "r") (lshiftrt "")])
diff --git a/gcc/testsuite/gcc.target/aarch64/shift-read_1.c b/gcc/testsuite/gcc.target/aarch64/shift-read_1.c
new file mode 100644
index 0000000000000000000000000000000000000000..864cfcb1650ae6553a18e753c8d8d0e85cd0ba7b
--- /dev/null
+++ b/gcc/testsuite/gcc.target/aarch64/shift-read_1.c
@@ -0,0 +1,73 @@
+/* { dg-do compile } */
+/* { dg-additional-options "-O2" } */
+/* { dg-final { check-function-bodies "**" "" "" { target { le } } } } */
+
+#include <arm_neon.h>
+
+/*
+** foor:
+** umov w0, v0.h\[3\]
+** ret
+*/
+unsigned int foor (uint32x4_t x)
+{
+ return x[1] >> 16;
+}
+
+/*
+** fool:
+** umov w0, v0.s\[1\]
+** lsl w0, w0, 16
+** ret
+*/
+unsigned int fool (uint32x4_t x)
+{
+ return x[1] << 16;
+}
+
+/*
+** foor2:
+** umov w0, v0.h\[7\]
+** ret
+*/
+unsigned short foor2 (uint32x4_t x)
+{
+ return x[3] >> 16;
+}
+
+/*
+** fool2:
+** fmov w0, s0
+** lsl w0, w0, 16
+** ret
+*/
+unsigned int fool2 (uint32x4_t x)
+{
+ return x[0] << 16;
+}
+
+typedef int v4si __attribute__ ((vector_size (16)));
+
+/*
+** bar:
+** addv s0, v0.4s
+** fmov w0, s0
+** lsr w1, w0, 16
+** add w0, w1, w0, uxth
+** ret
+*/
+int bar (v4si x)
+{
+ unsigned int sum = vaddvq_s32 (x);
+ return (((uint16_t)(sum & 0xffff)) + ((uint32_t)sum >> 16));
+}
+
+/*
+** foo:
+** lsr w0, w0, 16
+** ret
+*/
+unsigned short foo (unsigned x)
+{
+ return x >> 16;
+}
diff --git a/gcc/testsuite/gcc.target/aarch64/shift-read_2.c b/gcc/testsuite/gcc.target/aarch64/shift-read_2.c
new file mode 100644
index 0000000000000000000000000000000000000000..bdc214d1941807ce5aa21c369fcfe23c1927e98b
--- /dev/null
+++ b/gcc/testsuite/gcc.target/aarch64/shift-read_2.c
@@ -0,0 +1,84 @@
+/* { dg-do compile } */
+/* { dg-additional-options "-O2" } */
+/* { dg-final { check-function-bodies "**" "" "" { target { le } } } } */
+
+#include <arm_neon.h>
+
+/*
+** foor_1:
+** smov w0, v0.h\[3\]
+** ret
+*/
+int32_t foor_1 (int32x4_t x)
+{
+ return x[1] >> 16;
+}
+
+/*
+** foor_2:
+** smov x0, v0.h\[3\]
+** ret
+*/
+int64_t foor_2 (int32x4_t x)
+{
+ return x[1] >> 16;
+}
+
+
+/*
+** fool:
+** [su]mov w0, v0.s\[1\]
+** lsl w0, w0, 16
+** ret
+*/
+int fool (int32x4_t x)
+{
+ return x[1] << 16;
+}
+
+/*
+** foor2:
+** umov w0, v0.h\[7\]
+** ret
+*/
+short foor2 (int32x4_t x)
+{
+ return x[3] >> 16;
+}
+
+/*
+** fool2:
+** fmov w0, s0
+** lsl w0, w0, 16
+** ret
+*/
+int fool2 (int32x4_t x)
+{
+ return x[0] << 16;
+}
+
+typedef int v4si __attribute__ ((vector_size (16)));
+
+/*
+** bar:
+** addv s0, v0.4s
+** fmov w0, s0
+** lsr w1, w0, 16
+** add w0, w1, w0, uxth
+** ret
+*/
+int bar (v4si x)
+{
+ unsigned int sum = vaddvq_s32 (x);
+ return (((uint16_t)(sum & 0xffff)) + ((uint32_t)sum >> 16));
+}
+
+/*
+** foo:
+** lsr w0, w0, 16
+** ret
+*/
+short foo (int x)
+{
+ return x >> 16;
+}
[-- Attachment #2: rb15777.patch --]
[-- Type: application/octet-stream, Size: 8395 bytes --]
diff --git a/gcc/config/aarch64/aarch64.md b/gcc/config/aarch64/aarch64.md
index 39e65979528fb7f748ed456399ca38f929dba1d4..4c181a96e555c2a58c59fc991000b2a2fa9bd244 100644
--- a/gcc/config/aarch64/aarch64.md
+++ b/gcc/config/aarch64/aarch64.md
@@ -5425,20 +5425,42 @@ (define_split
;; Arithmetic right shift using SISD or Integer instruction
(define_insn "*aarch64_ashr_sisd_or_int_<mode>3"
- [(set (match_operand:GPI 0 "register_operand" "=r,r,w,&w,&w")
+ [(set (match_operand:GPI 0 "register_operand" "=r,r,w,r,&w,&w")
(ashiftrt:GPI
- (match_operand:GPI 1 "register_operand" "r,r,w,w,w")
+ (match_operand:GPI 1 "register_operand" "r,r,w,w,w,w")
(match_operand:QI 2 "aarch64_reg_or_shift_imm_di"
- "Us<cmode>,r,Us<cmode_simd>,w,0")))]
+ "Us<cmode>,r,Us<cmode_simd>,Usl,w,0")))]
""
- "@
- asr\t%<w>0, %<w>1, %2
- asr\t%<w>0, %<w>1, %<w>2
- sshr\t%<rtn>0<vas>, %<rtn>1<vas>, %2
- #
- #"
- [(set_attr "type" "bfx,shift_reg,neon_shift_imm<q>,neon_shift_reg<q>,neon_shift_reg<q>")
- (set_attr "arch" "*,*,simd,simd,simd")]
+ {
+ switch (which_alternative)
+ {
+ case 0:
+ return "asr\t%<w>0, %<w>1, %2";
+ case 1:
+ return "asr\t%<w>0, %<w>1, %<w>2";
+ case 2:
+ return "sshr\t%<rtn>0<vas>, %<rtn>1<vas>, %2";
+ case 3:
+ {
+ int val = INTVAL (operands[2]);
+ int size = 32 - val;
+
+ if (size == 16)
+ return "smov\\t%<w>0, %1.h[1]";
+ if (size == 8)
+ return "smov\\t%<w>0, %1.b[3]";
+ gcc_unreachable ();
+ }
+ case 4:
+ return "#";
+ case 5:
+ return "#";
+ default:
+ gcc_unreachable ();
+ }
+ }
+ [(set_attr "type" "bfx,shift_reg,neon_shift_imm<q>,neon_to_gp, neon_shift_reg<q>,neon_shift_reg<q>")
+ (set_attr "arch" "*,*,simd,simd,simd,simd")]
)
(define_split
@@ -5548,7 +5570,7 @@ (define_insn "*rol<mode>3_insn"
;; zero_extend version of shifts
(define_insn "*<optab>si3_insn_uxtw"
[(set (match_operand:DI 0 "register_operand" "=r,r")
- (zero_extend:DI (SHIFT_no_rotate:SI
+ (zero_extend:DI (SHIFT_arith:SI
(match_operand:SI 1 "register_operand" "r,r")
(match_operand:QI 2 "aarch64_reg_or_shift_imm_si" "Uss,r"))))]
""
@@ -5583,6 +5605,37 @@ (define_insn "*rolsi3_insn_uxtw"
[(set_attr "type" "rotate_imm")]
)
+(define_insn "*<optab>si3_insn2_<sra_op>xtw"
+ [(set (match_operand:DI 0 "register_operand" "=r,r,r")
+ (<extend_op>:DI (SHIFTRT:SI
+ (match_operand:SI 1 "register_operand" "w,r,r")
+ (match_operand:QI 2 "aarch64_reg_or_shift_imm_si" "Usl,Uss,r"))))]
+ "<is_zeroE> || satisfies_constraint_Usl (operands[2])"
+ {
+ switch (which_alternative)
+ {
+ case 0:
+ {
+ int val = INTVAL (operands[2]);
+ int size = 32 - val;
+
+ if (size == 16)
+ return "<sra_op>mov\\t%x0, %1.h[1]";
+ if (size == 8)
+ return "<sra_op>mov\\t%x0, %1.b[3]";
+ gcc_unreachable ();
+ }
+ case 1:
+ return "<shift>\\t%w0, %w1, %2";
+ case 2:
+ return "<shift>\\t%w0, %w1, %w2";
+ default:
+ gcc_unreachable ();
+ }
+ }
+ [(set_attr "type" "neon_to_gp,bfx,shift_reg")]
+)
+
(define_insn "*<optab><mode>3_insn"
[(set (match_operand:SHORT 0 "register_operand" "=r")
(ASHIFT:SHORT (match_operand:SHORT 1 "register_operand" "r")
diff --git a/gcc/config/aarch64/constraints.md b/gcc/config/aarch64/constraints.md
index 29efb6c0cff7574c9b239ef358acaca96dd75d03..c2a696cb77f49cae23239b0ed8a8aa5168f8898c 100644
--- a/gcc/config/aarch64/constraints.md
+++ b/gcc/config/aarch64/constraints.md
@@ -171,6 +171,14 @@ (define_constraint "Uss"
(and (match_code "const_int")
(match_test "(unsigned HOST_WIDE_INT) ival < 32")))
+(define_constraint "Usl"
+ "@internal
+ A constraint that matches an immediate shift constant in SImode that has an
+ exact mode available to use."
+ (and (match_code "const_int")
+ (and (match_test "satisfies_constraint_Uss (op)")
+ (match_test "(32 - ival == 8) || (32 - ival == 16)"))))
+
(define_constraint "Usn"
"A constant that can be used with a CCMN operation (once negated)."
(and (match_code "const_int")
diff --git a/gcc/config/aarch64/iterators.md b/gcc/config/aarch64/iterators.md
index 7c69b124f076b4fb2540241f287c6999c32123c1..df72c079f218db9727a96924cab496e91ce6df59 100644
--- a/gcc/config/aarch64/iterators.md
+++ b/gcc/config/aarch64/iterators.md
@@ -2149,8 +2149,8 @@ (define_mode_attr sve_lane_pair_con [(VNx8HF "y") (VNx4SF "x")])
;; This code iterator allows the various shifts supported on the core
(define_code_iterator SHIFT [ashift ashiftrt lshiftrt rotatert rotate])
-;; This code iterator allows all shifts except for rotates.
-(define_code_iterator SHIFT_no_rotate [ashift ashiftrt lshiftrt])
+;; This code iterator allows arithmetic shifts
+(define_code_iterator SHIFT_arith [ashift ashiftrt])
;; This code iterator allows the shifts supported in arithmetic instructions
(define_code_iterator ASHIFT [ashift ashiftrt lshiftrt])
@@ -2378,9 +2378,18 @@ (define_code_attr shift [(ashift "lsl") (ashiftrt "asr")
(define_code_attr is_rotl [(ashift "0") (ashiftrt "0")
(lshiftrt "0") (rotatert "0") (rotate "1")])
+;; True if zero extending operation or not
+(define_code_attr is_zeroE [(ashift "false") (ashiftrt "false")
+ (lshiftrt "true")])
+
+
;; Op prefix for shift right and accumulate.
(define_code_attr sra_op [(ashiftrt "s") (lshiftrt "u")])
+;; Extensions that can be performed with Op
+(define_code_attr extend_op [(ashiftrt "sign_extend")
+ (lshiftrt "zero_extend")])
+
;; op prefix for shift right and narrow.
(define_code_attr srn_op [(ashiftrt "r") (lshiftrt "")])
diff --git a/gcc/testsuite/gcc.target/aarch64/shift-read_1.c b/gcc/testsuite/gcc.target/aarch64/shift-read_1.c
new file mode 100644
index 0000000000000000000000000000000000000000..864cfcb1650ae6553a18e753c8d8d0e85cd0ba7b
--- /dev/null
+++ b/gcc/testsuite/gcc.target/aarch64/shift-read_1.c
@@ -0,0 +1,73 @@
+/* { dg-do compile } */
+/* { dg-additional-options "-O2" } */
+/* { dg-final { check-function-bodies "**" "" "" { target { le } } } } */
+
+#include <arm_neon.h>
+
+/*
+** foor:
+** umov w0, v0.h\[3\]
+** ret
+*/
+unsigned int foor (uint32x4_t x)
+{
+ return x[1] >> 16;
+}
+
+/*
+** fool:
+** umov w0, v0.s\[1\]
+** lsl w0, w0, 16
+** ret
+*/
+unsigned int fool (uint32x4_t x)
+{
+ return x[1] << 16;
+}
+
+/*
+** foor2:
+** umov w0, v0.h\[7\]
+** ret
+*/
+unsigned short foor2 (uint32x4_t x)
+{
+ return x[3] >> 16;
+}
+
+/*
+** fool2:
+** fmov w0, s0
+** lsl w0, w0, 16
+** ret
+*/
+unsigned int fool2 (uint32x4_t x)
+{
+ return x[0] << 16;
+}
+
+typedef int v4si __attribute__ ((vector_size (16)));
+
+/*
+** bar:
+** addv s0, v0.4s
+** fmov w0, s0
+** lsr w1, w0, 16
+** add w0, w1, w0, uxth
+** ret
+*/
+int bar (v4si x)
+{
+ unsigned int sum = vaddvq_s32 (x);
+ return (((uint16_t)(sum & 0xffff)) + ((uint32_t)sum >> 16));
+}
+
+/*
+** foo:
+** lsr w0, w0, 16
+** ret
+*/
+unsigned short foo (unsigned x)
+{
+ return x >> 16;
+}
diff --git a/gcc/testsuite/gcc.target/aarch64/shift-read_2.c b/gcc/testsuite/gcc.target/aarch64/shift-read_2.c
new file mode 100644
index 0000000000000000000000000000000000000000..bdc214d1941807ce5aa21c369fcfe23c1927e98b
--- /dev/null
+++ b/gcc/testsuite/gcc.target/aarch64/shift-read_2.c
@@ -0,0 +1,84 @@
+/* { dg-do compile } */
+/* { dg-additional-options "-O2" } */
+/* { dg-final { check-function-bodies "**" "" "" { target { le } } } } */
+
+#include <arm_neon.h>
+
+/*
+** foor_1:
+** smov w0, v0.h\[3\]
+** ret
+*/
+int32_t foor_1 (int32x4_t x)
+{
+ return x[1] >> 16;
+}
+
+/*
+** foor_2:
+** smov x0, v0.h\[3\]
+** ret
+*/
+int64_t foor_2 (int32x4_t x)
+{
+ return x[1] >> 16;
+}
+
+
+/*
+** fool:
+** [su]mov w0, v0.s\[1\]
+** lsl w0, w0, 16
+** ret
+*/
+int fool (int32x4_t x)
+{
+ return x[1] << 16;
+}
+
+/*
+** foor2:
+** umov w0, v0.h\[7\]
+** ret
+*/
+short foor2 (int32x4_t x)
+{
+ return x[3] >> 16;
+}
+
+/*
+** fool2:
+** fmov w0, s0
+** lsl w0, w0, 16
+** ret
+*/
+int fool2 (int32x4_t x)
+{
+ return x[0] << 16;
+}
+
+typedef int v4si __attribute__ ((vector_size (16)));
+
+/*
+** bar:
+** addv s0, v0.4s
+** fmov w0, s0
+** lsr w1, w0, 16
+** add w0, w1, w0, uxth
+** ret
+*/
+int bar (v4si x)
+{
+ unsigned int sum = vaddvq_s32 (x);
+ return (((uint16_t)(sum & 0xffff)) + ((uint32_t)sum >> 16));
+}
+
+/*
+** foo:
+** lsr w0, w0, 16
+** ret
+*/
+short foo (int x)
+{
+ return x >> 16;
+}
next prev parent reply other threads:[~2022-12-01 16:25 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-09-23 11:42 [PATCH 1/2]middle-end Fold BIT_FIELD_REF and Shifts into BIT_FIELD_REFs alone Tamar Christina
2022-09-23 11:43 ` [PATCH 2/2]AArch64 Perform more late folding of reg moves and shifts which arrive after expand Tamar Christina
2022-09-23 14:32 ` Richard Sandiford
2022-10-31 11:48 ` Tamar Christina
2022-11-14 21:54 ` Richard Sandiford
2022-11-14 21:59 ` Richard Sandiford
2022-12-01 16:25 ` Tamar Christina [this message]
2022-12-01 18:38 ` Richard Sandiford
2022-09-24 18:38 ` [PATCH 1/2]middle-end Fold BIT_FIELD_REF and Shifts into BIT_FIELD_REFs alone Jeff Law
2022-09-28 13:19 ` Tamar Christina
2022-09-28 17:25 ` Jeff Law
2022-09-24 18:57 ` Andrew Pinski
2022-09-26 4:55 ` Tamar Christina
2022-09-26 8:05 ` Richard Biener
2022-09-26 15:24 ` Andrew Pinski
2022-09-27 12:40 ` Richard Biener
2022-10-31 11:51 ` Tamar Christina
2022-10-31 16:24 ` Jeff Law
2022-11-07 13:29 ` Richard Biener
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=VI1PR08MB5325D059C557F68F8A9E27C4FF149@VI1PR08MB5325.eurprd08.prod.outlook.com \
--to=tamar.christina@arm.com \
--cc=Kyrylo.Tkachov@arm.com \
--cc=Marcus.Shawcroft@arm.com \
--cc=Richard.Earnshaw@arm.com \
--cc=Richard.Sandiford@arm.com \
--cc=gcc-patches@gcc.gnu.org \
--cc=nd@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).